-
X-ray variability of the triplet star system LTT1445 and evaporation history of the exoplanets around its A component
Authors:
S. Rukdee,
J. Buchner,
V. Burwitz,
K. Poppenhäger,
B. Stelzer,
P. Predehl
Abstract:
The high-energy environment of the host stars could be deleterious for their planets. It is crucial to ascertain this contextual information to fully characterize the atmospheres of terrestrial exoplanets. We aim to fully characterize a unique triple system, LTT1445, with three known rocky exoplanets around LTT 1445A. The X-ray irradiation and flaring of this system are studied through a new 50 ks…
▽ More
The high-energy environment of the host stars could be deleterious for their planets. It is crucial to ascertain this contextual information to fully characterize the atmospheres of terrestrial exoplanets. We aim to fully characterize a unique triple system, LTT1445, with three known rocky exoplanets around LTT 1445A. The X-ray irradiation and flaring of this system are studied through a new 50 ks Chandra observation, which is divided into 10 ks, 10 ks, and 30 ks segments conducted two days apart, and two months apart, respectively. This is complemented by an archival Chandra observation approximately one year earlier and repeated observations with eROSITA (extended ROentgen Survey with an Imaging Telescope Array), the soft X-ray instrument on the Spectrum-Roentgen-Gamma (SRG) mission, enabling the investigation of X-ray flux behavior across multiple time scales. With the observed X-ray flux from the exoplanet host star A, we estimate the photo-evaporation mass loss of each exoplanet. With the planet modeling package, VPLanet, we predict the evolution and anticipated current atmospheric conditions. Our Chandra observations indicate LTT 1445C as the dominant X-ray source, with additional contribution from LTT 1445B. LTT 1445A, a slowly-rotating star, exhibits no significant flare activity in the new Chandra dataset. Comparing the flux incident on the exoplanets, LTT 1445BC components do not pose a greater threat to the planets orbiting LTT 1445A than the emission from A itself. According to the results from the simulation, LTT 1445Ad might have the capacity to retain its water surface.
△ Less
Submitted 26 April, 2024; v1 submitted 30 January, 2024;
originally announced January 2024.
-
First on-sky results of a FIOS prototype, a Fabry Perot Based Instrument for Oxygen Searches
Authors:
Surangkhana Rukdee,
Sagi Ben-Ami,
Mercedes López-Morales,
Andrew Szentgyorgyi,
David Charbonneau,
Juliana García-Mejía,
Johannes Buchner
Abstract:
The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases such as molecular oxygen, $\mathrm{O_2}$, in the atmosphere of terrestrial planets around nearby stars. One of the most promising detection methods is transmission spectroscopy. To maximize our capability to detect $\mathrm{O_2}$ using this method, spectral resolu…
▽ More
The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases such as molecular oxygen, $\mathrm{O_2}$, in the atmosphere of terrestrial planets around nearby stars. One of the most promising detection methods is transmission spectroscopy. To maximize our capability to detect $\mathrm{O_2}$ using this method, spectral resolutions $\mathrm{R}\geq 300,000$ are required to fully resolve the absorption lines in an Earth-like exoplanet atmosphere and disentangle the signal from telluric lines. Current high-resolution spectrographs typically achieve a spectral resolution of $\mathrm{R}\sim100,000$. Increasing the resolution in seeing limited observations/instruments requires drastically larger optical components, making these instruments even more expensive and hard to fabricate and assemble. Instead, we demonstrate a new approach to high-resolution spectroscopy. We implemented an ultra-high spectral resolution booster to be coupled in front of a high-resolution spectrograph. The instrument is based on a chained Fabry Perot array which generates a hyperfine spectral profile. We present on-sky telluric observations with a lab demonstrator. Depending on the configuration, this two-arm prototype reaches a resolution of R=250,000-350,000. After carefully modeling the prototype's behavior, we propose a Fabry Perot Interferometer (FPI) design for an eight-arm array configuration aimed at ELTs capable of exceeding R=300,000. The novel FPI resolution booster can be plugged in at the front end of an existing R=100,000 spectrograph to overwrite the spectral profile with a higher resolution for exoplanet atmosphere studies.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
First wide field-of-view X-ray observations by a lobster eye focusing telescope in orbit
Authors:
C. Zhang,
Z. X. Ling,
X. J. Sun,
S. L. Sun,
Y. Liu,
Z. D. Li,
Y. L. Xue,
Y. F. Chen,
Y. F. Dai,
Z. Q. Jia,
H. Y. Liu,
X. F. Zhang,
Y. H. Zhang,
S. N. Zhang,
F. S. Chen,
Z. W. Cheng,
W. Fu,
Y. X. Han,
H. Li,
J. F. Li,
Y. Li,
P. R. Liu,
X. H. Ma,
Y. J. Tang,
C. B. Wang
, et al. (53 additional authors not shown)
Abstract:
As a novel X-ray focusing technology, lobster eye micro-pore optics (MPO) feature both a wide observing field of view and true imaging capability, promising sky monitoring with significantly improved sensitivity and spatial resolution in soft X-rays. Since first proposed by Angel (1979), the optics have been extensively studied, developed and trialed over the past decades. In this Letter, we repor…
▽ More
As a novel X-ray focusing technology, lobster eye micro-pore optics (MPO) feature both a wide observing field of view and true imaging capability, promising sky monitoring with significantly improved sensitivity and spatial resolution in soft X-rays. Since first proposed by Angel (1979), the optics have been extensively studied, developed and trialed over the past decades. In this Letter, we report on the first-light results from a flight experiment of the Lobster Eye Imager for Astronomy ($LEIA$), a pathfinder of the wide-field X-ray telescope of the Einstein Probe mission. The piggyback imager, launched in July 2022, has a mostly un-vignetted field of view of $18.6^\circ \times 18.6^\circ $. Its spatial resolution is in the range of 4$-$7 arcmin in FWHM and the focal spot effective area is 2$-$3 cm$^2$, both showing only mild fluctuations across the field of view. We present images of the Galactic center region, Sco X-1 and the diffuse Cygnus Loop nebular taken in snapshot observations over 0.5$-$4 keV. These are truly wide-field X-ray images of celestial bodies observed, for the first time, by a focusing imaging telescope. Initial analyses of the in-flight data show excellent agreement between the observed images and the on-ground calibration and simulations. The instrument and its characterization are briefly described, as well as the flight experiment. The results provide a solid basis for the development of the present and proposed wide-field X-ray missions using lobster eye MPO.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
First light of BEaTriX, the new testing facility for the modular X-ray optics of the ATHENA mission
Authors:
S. Basso,
B. Salmaso,
D. Spiga,
M. Ghigo,
G. Vecchi,
G. Sironi,
V. Cotroneo,
P. Conconi,
E. Redaelli,
A. Bianco,
G. Pareschi,
G. Tagliaferri,
D. Sisana,
C. Pelliciari,
M. Fiorini,
S. Incorvaia,
M. Uslenghi,
L. Paoletti,
C. Ferrari,
R. Lolli,
A. Zappettini,
M. Sanchez del Rio,
G. Parodi,
V. Burwitz,
S. Rukdee
, et al. (13 additional authors not shown)
Abstract:
The Beam Expander Testing X-ray facility (BEaTriX) is a unique X-ray apparatus now operated at the Istituto Nazionale di Astrofisica (INAF), Osservatorio Astronomico di Brera (OAB), in Merate, Italy. It has been specifically designed to measure the point spread function (PSF) and the effective area (EA) of the X-ray mirror modules (MMs) of the Advanced Telescope for High-ENergy Astrophysics (ATHEN…
▽ More
The Beam Expander Testing X-ray facility (BEaTriX) is a unique X-ray apparatus now operated at the Istituto Nazionale di Astrofisica (INAF), Osservatorio Astronomico di Brera (OAB), in Merate, Italy. It has been specifically designed to measure the point spread function (PSF) and the effective area (EA) of the X-ray mirror modules (MMs) of the Advanced Telescope for High-ENergy Astrophysics (ATHENA), based on silicon pore optics (SPO) technology, for verification before integration into the mirror assembly. To this end, BEaTriX generates a broad, uniform, monochromatic, and collimated X-ray beam at 4.51 keV. [...] In BEaTriX, a micro-focus X-ray source with a titanium anode is placed in the focus of a paraboloidal mirror, which generates a parallel beam. A crystal monochromator selects the 4.51 keV line, which is expanded to the final size by a crystal asymmetrically cut with respect to the crystalline planes. [...] After characterization, the BEaTriX beam has the nominal dimensions of 170 mm x 60 mm, with a vertical divergence of 1.65 arcsec and a horizontal divergence varying between 2.7 and 3.45 arcsec, depending on the monochromator setting: either high collimation or high intensity. The flux per area unit varies from 10 to 50 photons/s/cm2 from one configuration to the other. The BEaTriX beam performance was tested using an SPO MM, whose entrance pupil was fully illuminated by the expanded beam, and its focus was directly imaged onto the camera. The first light test returned a PSF and an EA in full agreement with expectations. As of today, the 4.51 keV beamline of BEaTriX is operational and can characterize modular X-ray optics, measuring their PSF and EA with a typical exposure of 30 minutes. [...] We expect BEaTriX to be a crucial facility for the functional test of modular X-ray optics, such as the SPO MMs for ATHENA.
△ Less
Submitted 7 July, 2022; v1 submitted 30 June, 2022;
originally announced June 2022.
-
X-ray performance of critical-angle transmission grating prototypes for the Arcus mission
Authors:
Ralf K. Heilmann,
Alexander R. Bruccoleri,
Vadim Burwitz,
Casey deRoo,
Alan Garner,
Hans Moritz Guenther,
Eric M. Gullikson,
Gisela Hartner,
Ed Hertz,
Andreas Langmeier,
Thomas Mueller,
Surangkhana Rukdee,
Thomas Schmidt,
Randall K. Smith,
Mark L. Schattenburg
Abstract:
Arcus is a proposed soft x-ray grating spectrometer Explorer. It aims to explore cosmic feedback by mapping hot gases within and between galaxies and galaxy clusters and characterizing jets and winds from supermassive black holes, and to investigate the dynamics of protoplanetary discs and stellar accretion. Arcus features 12 m-focal-length grazing-incidence silicon pore optics (SPO) developed for…
▽ More
Arcus is a proposed soft x-ray grating spectrometer Explorer. It aims to explore cosmic feedback by mapping hot gases within and between galaxies and galaxy clusters and characterizing jets and winds from supermassive black holes, and to investigate the dynamics of protoplanetary discs and stellar accretion. Arcus features 12 m-focal-length grazing-incidence silicon pore optics (SPO) developed for the Athena mission. Critical-angle transmission (CAT) gratings efficiently disperse high diffraction orders onto CCDs. We report new and improved x-ray performance results for Arcus-like CAT gratings, including record resolving power for two co-aligned CAT gratings. Multiple Arcus prototype grating facets were illuminated by an SPO at the PANTER facility. The facets consist of $32\times32.5$ mm$^2$ patterned silicon membranes, bonded to metal frames. The bonding angle is adjusted according to the measured average tilt angle of the grating bars in the membrane. Two simultaneously illuminated facets show minor broadening of the Al-K$_α$ doublet in 18$^{\rm th}$ and 21$^{\rm st}$ orders with a best fit record effective resolving power of $R_G \approx 1.3^{+\infty}_{-0.5}\times10^4$ ($3σ$), about 3-4 times the Arcus requirement. We measured the diffraction efficiency of quasi-fully illuminated gratings at O-K wavelengths in orders 4-7 in an Arcus-like configuration and compare results with synchrotron spot measurements. After corrections for geometrical effects and bremsstrahlung continuum we find agreement between full and spot illumination at the two different facilities, as well as with the models used for Arcus effective area predictions. We find that these flight-like gratings meet diffraction efficiency and greatly exceed resolving power Arcus requirements.
△ Less
Submitted 17 June, 2022;
originally announced June 2022.
-
Characterization of a multi-etalon array for ultra-high resolution spectroscopy
Authors:
Surangkhana Rukdee,
Sagi Ben-Ami,
Andrew Szentgyorgyi,
Mercedes López-Morales,
David Charbonneau,
Juliana García-Mejía
Abstract:
The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases in the atmosphere of rocky planets around nearby low-mass stars. Some efforts are currently focusing on searching for molecular oxygen (O2), since O2 is a known biosignature on Earth. One of the most promising methods to search for O2 is transmission spectroscopy…
▽ More
The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases in the atmosphere of rocky planets around nearby low-mass stars. Some efforts are currently focusing on searching for molecular oxygen (O2), since O2 is a known biosignature on Earth. One of the most promising methods to search for O2 is transmission spectroscopy in which high-resolution spectroscopy is combined with cross-correlation techniques. In this method, high spectral resolution is required both to resolve the exoplanet's O2 lines and to separate them from foreground telluric absorption. While current astronomical spectrographs typically achieve a spectral resolution of 100,000, recent studies show that resolutions of 300,000 -- 400,000 are optimal to detect O2 in the atmosphere of earth analogs with the ELTs. Fabry Perot Interferometer (FPI) arrays have been proposed as a relatively low-cost way to reach these resolutions. In this paper, we present performance results for our 2-FPI array lab prototype, which reaches a resolving power of 600,000. We further discuss the use of multi-cavity etalons (dualons) to be resolution boosters for existing spectrographs.
△ Less
Submitted 7 December, 2020;
originally announced December 2020.
-
TARdYS: Design and Prototype of an Exoplanet Hunter for TAO using a R6 Echelle Grating
Authors:
S. Rukdee,
L. Vanzi,
C. Schwab,
M. Flores,
A. Valenzuela,
J. Pember,
A. Zapata,
K. Motohara,
Y. Yoshii,
M. Tala Pinto
Abstract:
One limitation in characterizing exoplanet candidates is the availability of infrared, high-resolution spectrographs. An important factor in the scarcity of high precision IR spectrographs is the high cost of these instruments. We present a new optical design, which leads to a cost-effective solution. Our instrument is a high-resolution (R=60,000) infrared spectrograph with a R6 Echelle grating an…
▽ More
One limitation in characterizing exoplanet candidates is the availability of infrared, high-resolution spectrographs. An important factor in the scarcity of high precision IR spectrographs is the high cost of these instruments. We present a new optical design, which leads to a cost-effective solution. Our instrument is a high-resolution (R=60,000) infrared spectrograph with a R6 Echelle grating and an image slicer. We compare the best possible performance of quasi-Littrow and White Pupil setups, and prefer the latter because it achieves higher image quality. The instrument is proposed for the University of Tokyo Atacama Observatory (TAO) 6.5 m telescope in Chile. The Tao Aiuc high Resolution (d) Y band Spectrograph (TARdYS) covers 0.843-1.117 um. To reduce the cost, we squeeze 42 spectral orders onto a 1K detector with a semi-cryogenic solution. We obtain excellent resolution even when taking realistic manufacturing and alignment tolerances as well as thermal variations into account. In this paper, we present early results from the prototype of this spectrograph at ambient temperature.
△ Less
Submitted 1 December, 2020;
originally announced December 2020.
-
Quantifying the Bayesian Evidence for a Planet in Radial Velocity Data
Authors:
Benjamin E. Nelson,
Eric B. Ford,
Johannes Buchner,
Ryan Cloutier,
Rodrigo F. Díaz,
João P. Faria,
Vinesh M. Rajpaul,
Surangkhana Rukdee
Abstract:
We present results from a data challenge posed to the radial velocity (RV) community: namely, to quantify the Bayesian "evidence" for n={0,1,2,3} planets in a set of synthetically generated RV datasets containing a range of planet signals. Participating teams were provided the same likelihood function and set of priors to use in their analysis. They applied a variety of methods to estimate Z, the…
▽ More
We present results from a data challenge posed to the radial velocity (RV) community: namely, to quantify the Bayesian "evidence" for n={0,1,2,3} planets in a set of synthetically generated RV datasets containing a range of planet signals. Participating teams were provided the same likelihood function and set of priors to use in their analysis. They applied a variety of methods to estimate Z, the marginal likelihood for each n-planet model, including cross-validation, the Laplace approximation, importance sampling, and nested sampling. We found the dispersion in Z across different methods grew with increasing n-planet models: ~3 for 0-planets, ~10 for 1-planet, ~100-1000 for 2-planets, and >10,000 for 3-planets. Most internal estimates of uncertainty in Z for individual methods significantly underestimated the observed dispersion across all methods. Methods that adopted a Monte Carlo approach by comparing estimates from multiple runs yielded plausible uncertainties. Finally, two classes of numerical algorithms (those based on importance and nested samplers) arrived at similar conclusions regarding the ratio of Zs for n and (n+1)-planet models. One analytic method (the Laplace approximation) demonstrated comparable performance. We express both optimism and caution: we demonstrate that it is practical to perform rigorous Bayesian model comparison for <=3-planet models, yet robust planet discoveries require researchers to better understand the uncertainty in Z and its connections to model selection.
△ Less
Submitted 27 October, 2019; v1 submitted 12 June, 2018;
originally announced June 2018.
-
Precision stellar radial velocity measurements with FIDEOS at the ESO 1-m telescope of La Silla
Authors:
L. Vanzi,
A. Zapata,
M. Flores,
R. Brahm,
M. Tala Pinto,
S. Rukdee,
M. Jones,
S. Ropert,
T. Shen,
S. Ramirez,
V. Suc,
A. Jordan,
N. Espinoza
Abstract:
We present results from the commissioning and early science programs of FIDEOS, the new high-resolution echelle spectrograph developed at the Centre of Astro Engineering of Pontificia Universidad Catolica de Chile, and recently installed at the ESO 1m telescope of La Silla. The instrument provides spectral resolution R = 43,000 in the visible spectral range 420-800 nm, reaching a limiting magnitud…
▽ More
We present results from the commissioning and early science programs of FIDEOS, the new high-resolution echelle spectrograph developed at the Centre of Astro Engineering of Pontificia Universidad Catolica de Chile, and recently installed at the ESO 1m telescope of La Silla. The instrument provides spectral resolution R = 43,000 in the visible spectral range 420-800 nm, reaching a limiting magnitude of 11 in V band. Precision in the measurement of radial velocity is guaranteed by light feeding with an octagonal optical fibre, suitable mechanical isolation, thermal stabilisation, and simultaneous wavelength calibration. Currently the instrument reaches radial velocity stability of = 8 m/s over several consecutive nights of observation.
△ Less
Submitted 19 April, 2018;
originally announced April 2018.
-
Central rotations of Milky Way Globular Clusters
Authors:
Maximilian H. Fabricius,
Eva Noyola,
Surangkhana Rukdee,
Roberto P. Saglia,
Ralf Bender,
Ulrich Hopp,
Jens Thomas,
Michael Opitsch,
Michael J. Williams
Abstract:
Most Milky Way globular clusters (GCs) exhibit measurable flattening, even if on a very low level. Both cluster rotation and tidal fields are thought to cause this flattening. Nevertheless, rotation has only been confirmed in a handful of GCs, based mostly on individual radial velocities at large radii. We are conducting a survey of the central kinematics of Galactic GCs using the new Integral Fie…
▽ More
Most Milky Way globular clusters (GCs) exhibit measurable flattening, even if on a very low level. Both cluster rotation and tidal fields are thought to cause this flattening. Nevertheless, rotation has only been confirmed in a handful of GCs, based mostly on individual radial velocities at large radii. We are conducting a survey of the central kinematics of Galactic GCs using the new Integral Field Unit instrument VIRUS-W. We detect rotation in all 11 GCs that we have observed so far, rendering it likely that a large majority of the Milky Way GCs rotate. We use published catalogs of the ACS survey of GCs to derive central ellipticities and position angles. We show that in all cases where the central ellipticity permits an accurate measurement of the position angle, those angles are in excellent agreement with the kinematic position angles that we derive from the VIRUS-W velocity fields. We find an unexpected tight correlation between central rotation and outer ellipticity, indicating that rotation drives flattening for the objects in our sample. We also find a tight correlation between central rotation and published values for the central velocity dispersion, most likely due to rotation impacting the old dispersion measurements.
△ Less
Submitted 7 May, 2014;
originally announced May 2014.
