-
Subrelativistic Alternating Phase Focusing Dielectric Laser Accelerators
Authors:
Payton Broaddus,
Thilo Egenolf,
Dylan S. Black,
Melanie Murillo,
Clarisse Woodahl,
Yu Miao,
Uwe Niedermayer,
Robert L. Byer,
Kenneth J. Leedle,
Olav Solgaard
Abstract:
We demonstrate a silicon-based electron accelerator that uses laser optical near fields to both accelerate and confine electrons over extended distances. Two dielectric laser accelerator (DLA) designs were tested, each consisting of two arrays of silicon pillars pumped symmetrically by pulse front tilted laser beams, designed for average acceleration gradients 35 and 50 MeV/m respectively. The DLA…
▽ More
We demonstrate a silicon-based electron accelerator that uses laser optical near fields to both accelerate and confine electrons over extended distances. Two dielectric laser accelerator (DLA) designs were tested, each consisting of two arrays of silicon pillars pumped symmetrically by pulse front tilted laser beams, designed for average acceleration gradients 35 and 50 MeV/m respectively. The DLAs are designed to act as alternating phase focusing (APF) lattices, where electrons, depending on the electron-laser interaction phase, will alternate between opposing longitudinal and transverse focusing and defocusing forces. By incorporating fractional period drift sections that alter the synchronous phase between $\pm 60^\circ$ off crest, electrons captured in the designed acceleration bucket experience half the peak gradient as average gradient while also experiencing strong confinement forces that enable long interaction lengths. We demonstrate APF accelerators with interaction lengths up to 708 $μ$m and energy gains up to 23.7 $\pm$ 1.07 keV FWHM, a 25$\%$ increase from starting energy, demonstrating the ability to achieve substantial energy gains with subrelativistic DLA.
△ Less
Submitted 12 March, 2024; v1 submitted 3 October, 2023;
originally announced October 2023.
-
Scalable Low-latency Optical Phase Sensor Array
Authors:
Zhanghao Sun,
Sunil Pai,
Carson Valdez,
Maziyar Milanizadeh,
Andrea Melloni,
Francesco Morichetti,
David A. B. Miller,
Olav Solgaard
Abstract:
Optical phase measurement is critical for many applications and traditional approaches often suffer from mechanical instability, temporal latency, and computational complexity. In this paper, we describe compact phase sensor arrays based on integrated photonics, which enable accurate and scalable reference-free phase sensing in a few measurement steps. This is achieved by connecting multiple two-p…
▽ More
Optical phase measurement is critical for many applications and traditional approaches often suffer from mechanical instability, temporal latency, and computational complexity. In this paper, we describe compact phase sensor arrays based on integrated photonics, which enable accurate and scalable reference-free phase sensing in a few measurement steps. This is achieved by connecting multiple two-port phase sensors into a graph to measure relative phases between neighboring and distant spatial locations. We propose an efficient post-processing algorithm, as well as circuit design rules to reduce random and biased error accumulations. We demonstrate the effectiveness of our system in both simulations and experiments with photonic integrated circuits. The proposed system measures the optical phase directly without the need for external references or spatial light modulators, thus providing significant benefits for applications including microscope imaging and optical phased arrays.
△ Less
Submitted 3 May, 2023;
originally announced May 2023.
-
Immersion graded index optics: theory, design, and prototypes
Authors:
Nina Vaidya,
Olav Solgaard
Abstract:
Immersion optics enable creation of systems with improved optical concentration and coupling by taking advantage of the fact that the luminance of light is proportional to the square of the refractive index in a lossless optical system. Immersion graded index optical concentrators, that do not need to track the source, are described in terms of theory, simulations, and experiments. We introduce a…
▽ More
Immersion optics enable creation of systems with improved optical concentration and coupling by taking advantage of the fact that the luminance of light is proportional to the square of the refractive index in a lossless optical system. Immersion graded index optical concentrators, that do not need to track the source, are described in terms of theory, simulations, and experiments. We introduce a generalized design guide equation which follows the Pareto function and can be used to create various immersion graded index optics depending on the application requirements of concentration, refractive index, height, and efficiency. We present glass and polymer fabrication techniques for creating broadband transparent graded index materials with large refractive index ranges, (refractive index ratio)^2 of ~2, going many fold beyond what is seen in nature or the optics industry. The prototypes demonstrate 3x optical concentration with over 90% efficiency. We report via functional prototypes that graded-index-lens concentrators perform close to the theoretical maximum limit and we introduce simple, inexpensive, design-flexible, and scalable fabrication techniques for their implementation.
△ Less
Submitted 19 November, 2022;
originally announced November 2022.
-
Scalable and self-correcting photonic computation using balanced photonic binary tree cascades
Authors:
Sunil Pai,
Olav Solgaard,
Shanhui Fan,
David A. B. Miller
Abstract:
Programmable unitary photonic networks that interfere hundreds of modes are emerging as a key technology in energy-efficient sensing, machine learning, cryptography, and linear optical quantum computing applications. In this work, we establish a theoretical framework to quantify error tolerance and scalability in a more general class of "binary tree cascade'' programmable photonic networks that ac…
▽ More
Programmable unitary photonic networks that interfere hundreds of modes are emerging as a key technology in energy-efficient sensing, machine learning, cryptography, and linear optical quantum computing applications. In this work, we establish a theoretical framework to quantify error tolerance and scalability in a more general class of "binary tree cascade'' programmable photonic networks that accept up to tens of thousands of discrete input modes $N$. To justify this scalability claim, we derive error tolerance and configuration time that scale with $\log_2 N$ for balanced trees versus $N$ in unbalanced trees, despite the same number of total components. Specifically, we use second-order perturbation theory to compute phase sensitivity in each waveguide of balanced and unbalanced networks, and we compute the statistics of the sensitivity given random input vectors. We also evaluate such networks after they self-correct, or self-configure, themselves for errors in the circuit due to fabrication error and environmental drift. Our findings have important implications for scaling photonic circuits to much larger circuit sizes; this scaling is particularly critical for applications such as principal component analysis and fast Fourier transforms, which are important algorithms for machine learning and signal processing.
△ Less
Submitted 30 October, 2022;
originally announced October 2022.
-
Experimental evaluation of digitally-verifiable photonic computing for blockchain and cryptocurrency
Authors:
Sunil Pai,
Taewon Park,
Marshall Ball,
Bogdan Penkovsky,
Maziyar Milanizadeh,
Michael Dubrovsky,
Nathnael Abebe,
Francesco Morichetti,
Andrea Melloni,
Shanhui Fan,
Olav Solgaard,
David A. B. Miller
Abstract:
As blockchain technology and cryptocurrency become increasingly mainstream, ever-increasing energy costs required to maintain the computational power running these decentralized platforms create a market for more energy-efficient hardware. Photonic cryptographic hash functions, which use photonic integrated circuits to accelerate computation, promise energy efficiency for verifying transactions an…
▽ More
As blockchain technology and cryptocurrency become increasingly mainstream, ever-increasing energy costs required to maintain the computational power running these decentralized platforms create a market for more energy-efficient hardware. Photonic cryptographic hash functions, which use photonic integrated circuits to accelerate computation, promise energy efficiency for verifying transactions and mining in a cryptonetwork. Like many analog computing approaches, however, current proposals for photonic cryptographic hash functions that promise similar security guarantees as Bitcoin are susceptible to systematic error, so multiple devices may not reach a consensus on computation despite high numerical precision (associated with low photodetector noise). In this paper, we theoretically and experimentally demonstrate that a more general family of robust discrete analog cryptographic hash functions, which we introduce as LightHash, leverages integer matrix-vector operations on photonic mesh networks of interferometers. The difficulty of LightHash can be adjusted to be sufficiently tolerant to systematic error (calibration error, loss error, coupling error, and phase error) and preserve inherent security guarantees present in the Bitcoin protocol. Finally, going beyond our proof-of-concept, we define a ``photonic advantage'' criterion and justify how recent developments in CMOS optoelectronics (including analog-digital conversion) provably achieve such advantage for robust and digitally-verifiable photonic computing and ultimately generate a new market for decentralized photonic technology.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
Experimentally realized in situ backpropagation for deep learning in nanophotonic neural networks
Authors:
Sunil Pai,
Zhanghao Sun,
Tyler W. Hughes,
Taewon Park,
Ben Bartlett,
Ian A. D. Williamson,
Momchil Minkov,
Maziyar Milanizadeh,
Nathnael Abebe,
Francesco Morichetti,
Andrea Melloni,
Shanhui Fan,
Olav Solgaard,
David A. B. Miller
Abstract:
Neural networks are widely deployed models across many scientific disciplines and commercial endeavors ranging from edge computing and sensing to large-scale signal processing in data centers. The most efficient and well-entrenched method to train such networks is backpropagation, or reverse-mode automatic differentiation. To counter an exponentially increasing energy budget in the artificial inte…
▽ More
Neural networks are widely deployed models across many scientific disciplines and commercial endeavors ranging from edge computing and sensing to large-scale signal processing in data centers. The most efficient and well-entrenched method to train such networks is backpropagation, or reverse-mode automatic differentiation. To counter an exponentially increasing energy budget in the artificial intelligence sector, there has been recent interest in analog implementations of neural networks, specifically nanophotonic neural networks for which no analog backpropagation demonstration exists. We design mass-manufacturable silicon photonic neural networks that alternately cascade our custom designed "photonic mesh" accelerator with digitally implemented nonlinearities. These reconfigurable photonic meshes program computationally intensive arbitrary matrix multiplication by setting physical voltages that tune the interference of optically encoded input data propagating through integrated Mach-Zehnder interferometer networks. Here, using our packaged photonic chip, we demonstrate in situ backpropagation for the first time to solve classification tasks and evaluate a new protocol to keep the entire gradient measurement and update of physical device voltages in the analog domain, improving on past theoretical proposals. Our method is made possible by introducing three changes to typical photonic meshes: (1) measurements at optical "grating tap" monitors, (2) bidirectional optical signal propagation automated by fiber switch, and (3) universal generation and readout of optical amplitude and phase. After training, our classification achieves accuracies similar to digital equivalents even in presence of systematic error. Our findings suggest a new training paradigm for photonics-accelerated artificial intelligence based entirely on a physical analog of the popular backpropagation technique.
△ Less
Submitted 17 May, 2022;
originally announced May 2022.
-
High Gradient Silicon Carbide Immersion Lens Ultrafast Electron Sources
Authors:
Kenneth J. Leedle,
Uwe Niedermayer,
Eric Skär,
Karel Urbanek,
Yu Miao,
Payton Broaddus,
Olav Solgaard,
Robert L. Byer
Abstract:
We present two compact ultrafast electron injector designs with integrated focusing that provide high peak brightness of up to $1.9*10^{12} A/m^2Sr^2$ with 10s of electrons per laser pulse using silicon carbide electrodes and silicon nanotip emitters. We demonstrate a few centimeter scale 96 keV immersion lens electron source and a 57 keV immersion lens electron source with a 19 kV/mm average acce…
▽ More
We present two compact ultrafast electron injector designs with integrated focusing that provide high peak brightness of up to $1.9*10^{12} A/m^2Sr^2$ with 10s of electrons per laser pulse using silicon carbide electrodes and silicon nanotip emitters. We demonstrate a few centimeter scale 96 keV immersion lens electron source and a 57 keV immersion lens electron source with a 19 kV/mm average acceleration gradient, nearly double the typical 10 kV/mm used in DC electron sources. The brightness of the electron sources is measured alongside start-to-end simulations including space charge effects. These sources are suitable for dielectric laser accelerator experiments, ultrafast electron diffraction, and other applications where a compact high brightness electron source is required.
△ Less
Submitted 25 January, 2022;
originally announced January 2022.
-
Electron Pulse Compression with Optical Beat Note
Authors:
Zhexin Zhao,
Kenneth J. Leedle,
Dylan S. Black,
Olav Solgaard,
Robert L. Byer,
Shanhui Fan
Abstract:
Compressing electron pulses is important in many applications of electron beam systems. In this study, we propose to use optical beat notes to compress electron pulses. The beat frequency is chosen to match the initial electron pulse duration, which enables the compression of electron pulses with a wide range of durations. This functionality extends the optical control of electron beams, which is…
▽ More
Compressing electron pulses is important in many applications of electron beam systems. In this study, we propose to use optical beat notes to compress electron pulses. The beat frequency is chosen to match the initial electron pulse duration, which enables the compression of electron pulses with a wide range of durations. This functionality extends the optical control of electron beams, which is important in compact electron beam systems such as dielectric laser accelerators. We also find that the dominant frequency of the electron charge density changes continuously along its drift trajectory, which may open up new opportunities in coherent interaction between free electrons and quantum or classical systems.
△ Less
Submitted 20 November, 2021;
originally announced November 2021.
-
Resonant Scanning Design and Control for Fast Spatial Sampling
Authors:
Zhanghao Sun,
Ronald Quan,
Olav Solgaard
Abstract:
Two-dimensional, resonant scanners have been utilized in a large variety of imaging modules due to their compact form, low power consumption, large angular range, and high speed. However, resonant scanners have problems with non-optimal and inflexible scanning patterns and inherent phase uncertainty, which limit practical applications. Here we propose methods for optimized design and control of th…
▽ More
Two-dimensional, resonant scanners have been utilized in a large variety of imaging modules due to their compact form, low power consumption, large angular range, and high speed. However, resonant scanners have problems with non-optimal and inflexible scanning patterns and inherent phase uncertainty, which limit practical applications. Here we propose methods for optimized design and control of the scanning trajectory of two-dimensional resonant scanners under various physical constraints, including high frame-rate and limited actuation amplitude. First, we propose an analytical design rule for uniform spatial sampling. We demonstrate theoretically and experimentally that by including non-repeating scanning patterns, the proposed designs outperform previous designs in terms of scanning range and fill factor. Second, we show that we can create flexible scanning patterns that allow focusing on user-defined Regions-of-Interest (RoI) by modulation of the scanning parameters. The scanning parameters are found by an optimization algorithm. In simulations, we demonstrate the benefits of these designs with standard metrics and higher-level computer vision tasks (LiDAR odometry and 3D object detection). Finally, we experimentally implement and verify both unmodulated and modulated scanning modes using a two-dimensional, resonant MEMS scanner. Central to the implementations is high bandwidth monitoring of the phase of the angular scans in both dimensions. This task is carried out with a position-sensitive photodetector combined with high-bandwidth electronics, enabling fast spatial sampling at ~ 100Hz frame-rate.
△ Less
Submitted 6 August, 2021; v1 submitted 24 March, 2021;
originally announced March 2021.
-
Low Energy Spread Attosecond Bunching and Coherent Electron Acceleration in Dielectric Nanostructures
Authors:
Uwe Niedermayer,
Dylan S. Black,
Kenneth J. Leedle,
Yu Miao,
Robert L. Byer,
Olav Solgaard
Abstract:
We demonstrate a compact technique to compress electron pulses to attosecond length, while keeping the energy spread reasonably small. The technique is based on Dielectric Laser Acceleration (DLA) in nanophotonic silicon structures. Unlike previous ballistic optical microbunching demonstrations, we use a modulator-demodulator scheme to compress phase space in the time and energy coordinates. With…
▽ More
We demonstrate a compact technique to compress electron pulses to attosecond length, while keeping the energy spread reasonably small. The technique is based on Dielectric Laser Acceleration (DLA) in nanophotonic silicon structures. Unlike previous ballistic optical microbunching demonstrations, we use a modulator-demodulator scheme to compress phase space in the time and energy coordinates. With a second stage, we show that these pulses can be coherently accelerated, producing a net energy gain of $1.5\pm0.1$ keV, which is significantly larger than the remaining energy spread of $0.88 \,_{-0.2}^{+0.0}$ keV FWHM. We show that by linearly sweeping the phase between the two stages, the energy spectrum can be coherently moved in a periodic manner, while keeping the energy spread roughly constant. After leaving the buncher, the electron pulse is also transversely focused, and can be matched into a following accelerator lattice. Thus, this setup is the prototype injector into a scalable DLA based on Alternating Phase Focusing (APF).
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
Design of a multi-channel photonic crystal dielectric laser accelerator
Authors:
Zhexin Zhao,
Dylan S. Black,
R. Joel England,
Tyler W. Hughes,
Yu Miao,
Olav Solgaard,
Robert L. Byer,
Shanhui Fan
Abstract:
To be useful for most scientific and medical applications, compact particle accelerators will require much higher average current than enabled by current architectures. For this purpose, we propose a photonic crystal architecture for a dielectric laser accelerator, referred to as a multi-input multi-output silicon accelerator (MIMOSA), that enables simultaneous acceleration of multiple electron be…
▽ More
To be useful for most scientific and medical applications, compact particle accelerators will require much higher average current than enabled by current architectures. For this purpose, we propose a photonic crystal architecture for a dielectric laser accelerator, referred to as a multi-input multi-output silicon accelerator (MIMOSA), that enables simultaneous acceleration of multiple electron beams, increasing the total electron throughput by at least one order of magnitude. To achieve this, we show that the photonic crystal must support a mode at the $Γ$ point in reciprocal space, with a normalized frequency equal to the normalized speed of the phase matched electron. We show that the figure of merit of the MIMOSA can be inferred from the eigenmodes of the corresponding infinitely periodic structure, which provides a powerful approach to design such devices. Additionally, we extend the MIMOSA architecture to electron deflectors and other electron manipulation functionalities. These additional functionalities, combined with the increased electron throughput of these devices, permit all-optical on-chip manipulation of electron beams in a fully integrated architecture compatible with current fabrication technologies, which opens the way to unconventional electron beam shaping, imaging, and radiation generation.
△ Less
Submitted 26 January, 2020;
originally announced January 2020.
-
Parallel fault-tolerant programming of an arbitrary feedforward photonic network
Authors:
Sunil Pai,
Ian A. D. Williamson,
Tyler W. Hughes,
Momchil Minkov,
Olav Solgaard,
Shanhui Fan,
David A. B. Miller
Abstract:
Reconfigurable photonic mesh networks of tunable beamsplitter nodes can linearly transform $N$-dimensional vectors representing input modal amplitudes of light for applications such as energy-efficient machine learning hardware, quantum information processing, and mode demultiplexing. Such photonic meshes are typically programmed and/or calibrated by tuning or characterizing each beam splitter one…
▽ More
Reconfigurable photonic mesh networks of tunable beamsplitter nodes can linearly transform $N$-dimensional vectors representing input modal amplitudes of light for applications such as energy-efficient machine learning hardware, quantum information processing, and mode demultiplexing. Such photonic meshes are typically programmed and/or calibrated by tuning or characterizing each beam splitter one-by-one, which can be time-consuming and can limit scaling to larger meshes. Here we introduce a graph-topological approach that defines the general class of feedforward networks commonly used in such applications and identifies columns of non-interacting nodes that can be adjusted simultaneously. By virtue of this approach, we can calculate the necessary input vectors to program entire columns of nodes in parallel by simultaneously nullifying the power in one output of each node via optoelectronic feedback onto adjustable phase shifters or couplers. This parallel nullification approach is fault-tolerant to fabrication errors, requiring no prior knowledge or calibration of the node parameters, and can reduce the programming time by a factor of order $N$ to being proportional to the optical depth (or number of node columns in the device). As a demonstration, we simulate our programming protocol on a feedforward optical neural network model trained to classify handwritten digit images from the MNIST dataset with up to 98% validation accuracy.
△ Less
Submitted 11 September, 2019;
originally announced September 2019.
-
On-chip integrated laser-driven particle accelerator
Authors:
Neil V. Sapra,
Ki Youl Yang,
Dries Vercruysse,
Kenneth J. Leedle,
Dylan S. Black,
R. Joel England,
Logan Su,
Yu Miao,
Olav Solgaard,
Robert L. Byer,
Jelena Vučković
Abstract:
Particle accelerators represent an indispensable tool in science and industry. However, the size and cost of conventional radio-frequency accelerators limit the utility and reach of this technology. Dielectric laser accelerators (DLAs) provide a compact and cost-effective solution to this problem by driving accelerator nanostructures with visible or near-infrared (NIR) pulsed lasers, resulting in…
▽ More
Particle accelerators represent an indispensable tool in science and industry. However, the size and cost of conventional radio-frequency accelerators limit the utility and reach of this technology. Dielectric laser accelerators (DLAs) provide a compact and cost-effective solution to this problem by driving accelerator nanostructures with visible or near-infrared (NIR) pulsed lasers, resulting in a 10$^4$ reduction of scale. Current implementations of DLAs rely on free-space lasers directly incident on the accelerating structures, limiting the scalability and integrability of this technology. Here we present the first experimental demonstration of a waveguide-integrated DLA, designed using a photonic inverse design approach. These on-chip devices accelerate sub-relativistic electrons of initial energy 83.4 keV by 1.21 keV over 30 um, providing peak acceleration gradients of 40.3 MeV/m. This progress represents a significant step towards a completely integrated MeV-scale dielectric laser accelerator.
△ Less
Submitted 29 May, 2019;
originally announced May 2019.
-
Laser-Driven Electron Lensing in Silicon Microstructures
Authors:
Dylan S. Black,
Kenneth J. Leedle,
Yu Miao,
Uwe Niedermayer,
Robert L. Byer,
Olav Solgaard
Abstract:
We demonstrate a laser-driven, tunable electron lens fabricated in monolithic silicon. The lens consists of an array of silicon pillars pumped symmetrically by two 300 fs, 1.95 $μ$m wavelength, nJ-class laser pulses from an optical parametric amplifier. The optical near-field of the pillar structure focuses electrons in the plane perpendicular to the pillar axes. With 100 $\pm$ 10 MV/m incident la…
▽ More
We demonstrate a laser-driven, tunable electron lens fabricated in monolithic silicon. The lens consists of an array of silicon pillars pumped symmetrically by two 300 fs, 1.95 $μ$m wavelength, nJ-class laser pulses from an optical parametric amplifier. The optical near-field of the pillar structure focuses electrons in the plane perpendicular to the pillar axes. With 100 $\pm$ 10 MV/m incident laser fields, the lens focal length is measured to be 50 $\pm$ 4 $μ$m, which corresponds to an equivalent quadrupole focusing gradient $B'$ of 1.4 $\pm$ 0.1 MT/m. By varying the incident laser field strength, the lens can be tuned from a 21 $\pm$ 2 $μ$m focal length ($B'>3.3$ MT/m) to focal lengths on the cm-scale.
△ Less
Submitted 31 January, 2019;
originally announced February 2019.
-
Matrix optimization on universal unitary photonic devices
Authors:
Sunil Pai,
Ben Bartlett,
Olav Solgaard,
David A. B. Miller
Abstract:
Universal unitary photonic devices can apply arbitrary unitary transformations to a vector of input modes and provide a promising hardware platform for fast and energy-efficient machine learning using light. We simulate the gradient-based optimization of random unitary matrices on universal photonic devices composed of imperfect tunable interferometers. If device components are initialized uniform…
▽ More
Universal unitary photonic devices can apply arbitrary unitary transformations to a vector of input modes and provide a promising hardware platform for fast and energy-efficient machine learning using light. We simulate the gradient-based optimization of random unitary matrices on universal photonic devices composed of imperfect tunable interferometers. If device components are initialized uniform-randomly, the locally-interacting nature of the mesh components biases the optimization search space towards banded unitary matrices, limiting convergence to random unitary matrices. We detail a procedure for initializing the device by sampling from the distribution of random unitary matrices and show that this greatly improves convergence speed. We also explore mesh architecture improvements such as adding extra tunable beamsplitters or permuting waveguide layers to further improve the training speed and scalability of these devices.
△ Less
Submitted 21 May, 2019; v1 submitted 1 August, 2018;
originally announced August 2018.
-
On-Chip Laser Power Delivery System for Dielectric Laser Accelerators
Authors:
Tyler W. Hughes,
Si Tan,
Zhexin Zhao,
Neil V. Sapra,
Yun Jo Lee,
Kenneth J. Leedle,
Huiyang Deng,
Yu Miao,
Dylan S. Black,
Minghao Qi,
Olav Solgaard,
James S. Harris,
Jelena Vuckovic,
Robert L. Byer,
Shanhui Fan
Abstract:
We propose an on-chip optical power delivery system for dielectric laser accelerators based on a fractal 'tree-branch' dielectric waveguide network. This system replaces experimentally demanding free-space manipulations of the driving laser beam with chip-integrated techniques based on precise nano-fabrication, enabling access to orders of magnitude increases in the interaction length and total en…
▽ More
We propose an on-chip optical power delivery system for dielectric laser accelerators based on a fractal 'tree-branch' dielectric waveguide network. This system replaces experimentally demanding free-space manipulations of the driving laser beam with chip-integrated techniques based on precise nano-fabrication, enabling access to orders of magnitude increases in the interaction length and total energy gain for these miniature accelerators. Based on computational modeling, in the relativistic regime, our laser delivery system is estimated to provide 21 keV of energy gain over an acceleration length of 192 um with a single laser input, corresponding to a 108 MV/m acceleration gradient. The system may achieve 1 MeV of energy gain over a distance less than 1 cm by sequentially illuminating 49 identical structures. These findings are verified by detailed numerical simulation and modeling of the subcomponents and we provide a discussion of the main constraints, challenges, and relevant parameters in regards to on-chip laser coupling for dielectric laser accelerators.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
Design of racetrack ring resonator based dielectric laser accelerators
Authors:
Huiyang Deng,
Jiaqi Jiang,
Yu Miao,
Kenneth J. Leedle,
Hongquan Li,
Olav Solgaard,
Robert L. Byer,
James S. Harris
Abstract:
In this paper, we propose a novel design of dielectric laser-driven accelerator (DLA) utilizing evanescent electric field of racetrack ring resonator structures. Driven by laser light with the correctly designed optical phase window, sustained acceleration of electrons with controlled deflection is shown. Based on this design, we calculate an acceleration from 30 keV to 148.312 keV in 104.655 μm u…
▽ More
In this paper, we propose a novel design of dielectric laser-driven accelerator (DLA) utilizing evanescent electric field of racetrack ring resonator structures. Driven by laser light with the correctly designed optical phase window, sustained acceleration of electrons with controlled deflection is shown. Based on this design, we calculate an acceleration from 30 keV to 148.312 keV in 104.655 μm using a cascaded 11-stage racetrack ring resonators. This new idea poses a solution for on-chip integration of many DLA stages, while maintains high average accelerating gradients, providing a potential practical realization for "accelerator on a chip".
△ Less
Submitted 31 January, 2017;
originally announced January 2017.
-
Elements of a dielectric laser accelerator
Authors:
Joshua McNeur,
Martin Kozák,
Norbert Schönenberger,
Kenneth J. Leedle,
Huiyang Deng,
Andrew Ceballos,
Heinar Hoogland,
Axel Ruehl,
Ingmar Hartl,
Ronald Holzwarth,
Olav Solgaard,
James S. Harris,
Robert L. Byer,
Peter Hommelhoff
Abstract:
The widespread use of high energy particle beams in basic research, medicine and coherent X-ray generation coupled with the large size of modern radio frequency (RF) accelerator devices and facilities has motivated a strong need for alternative accelerators operating in regimes outside of RF. Working at optical frequencies, dielectric laser accelerators (DLAs) - transparent laser-driven nanoscale…
▽ More
The widespread use of high energy particle beams in basic research, medicine and coherent X-ray generation coupled with the large size of modern radio frequency (RF) accelerator devices and facilities has motivated a strong need for alternative accelerators operating in regimes outside of RF. Working at optical frequencies, dielectric laser accelerators (DLAs) - transparent laser-driven nanoscale dielectric structures whose near fields can synchronously accelerate charged particles - have demonstrated high-gradient acceleration with a variety of laser wavelengths, materials, and electron beam parameters, potentially enabling miniaturized accelerators and table-top coherent x-ray sources. To realize a useful (i.e. scalable) DLA, crucial developments have remained: concatenation of components including sustained phase synchronicity to reach arbitrary final energies as well as deflection and focusing elements to keep the beam well collimated along the design axis. Here, all of these elements are demonstrated with a subrelativistic electron beam. In particular, by creating two interaction regions via illumination of a nanograting with two spatio-temporally separated pulsed laser beams, we demonstrate a phase-controlled doubling of electron energy gain from 0.7 to 1.4 keV (2.5 percent to 5 percent of the initial beam energy) and through use of a chirped grating geometry, we overcome the dephasing limit of 25 keV electrons, increasing their energy gains to a laser power limited 10 percent of their initial energy. Further, optically-driven transverse focusing of the electron beam with focal lengths below 200 microns is achieved via a parabolic grating geometry. These results lay the cornerstone for future miniaturized phase synchronous vacuum-structure-based accelerators.
△ Less
Submitted 5 June, 2016; v1 submitted 26 April, 2016;
originally announced April 2016.
-
Miniature photonic-crystal hydrophone optimized for ocean acoustics
Authors:
Onur Kilic,
Michel J. F. Digonnet,
Gordon S. Kino,
Olav Solgaard
Abstract:
This work reports on an optical hydrophone that is insensitive to hydrostatic pressure, yet capable of measuring acoustic pressures as low as the background noise in the ocean in a frequency range of 1 Hz to 100 kHz. The miniature hydrophone consists of a Fabry-Perot interferometer made of a photonic-crystal reflector interrogated with a single-mode fiber, and is compatible with existing fiber-opt…
▽ More
This work reports on an optical hydrophone that is insensitive to hydrostatic pressure, yet capable of measuring acoustic pressures as low as the background noise in the ocean in a frequency range of 1 Hz to 100 kHz. The miniature hydrophone consists of a Fabry-Perot interferometer made of a photonic-crystal reflector interrogated with a single-mode fiber, and is compatible with existing fiber-optic technologies. Three sensors with different acoustic power ranges placed within a sub-wavelength sized hydrophone head allow a high dynamic range in the excess of 160 dB with a low harmonic distortion of better than -30 dB. A method for suppressing cross coupling between sensors in the same hydrophone head is also proposed. A prototype was fabricated, assembled, and tested. The sensitivity was measured from 100 Hz to 100 kHz, demonstrating a minimum detectable pressure down to 12 μPa (1-Hz noise bandwidth), a flatband wider than 10 kHz, and very low distortion.
△ Less
Submitted 12 December, 2010; v1 submitted 15 April, 2010;
originally announced April 2010.