-
Distributed MIMO Networks with Rotary ULAs for Indoor Scenarios under Rician Fading
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
The Fifth-Generation (5G) wireless communications networks introduced native support for Machine-Type Communications (MTC) use cases. Nevertheless, current 5G networks cannot fully meet the very stringent requirements regarding latency, reliability, and number of connected devices of most MTC use cases. Industry and academia have been working on the evolution from 5G to Sixth Generation (6G) netwo…
▽ More
The Fifth-Generation (5G) wireless communications networks introduced native support for Machine-Type Communications (MTC) use cases. Nevertheless, current 5G networks cannot fully meet the very stringent requirements regarding latency, reliability, and number of connected devices of most MTC use cases. Industry and academia have been working on the evolution from 5G to Sixth Generation (6G) networks. One of the main novelties is adopting Distributed Multiple-Input Multiple-Output (D-MIMO) networks. However, most works studying D-MIMO consider antenna arrays with no movement capabilities, even though some recent works have shown that this could bring substantial performance improvements. In this work, we propose the utilization of Access Points (APs) equipped with Rotary Uniform Linear Arrays (RULAs) for this purpose. Considering a spatially correlated Rician fading model, the optimal angular position of the RULAs is jointly computed by the central processing unit using particle swarm optimization as a function of the position of the active devices. Considering the impact of imperfect positioning estimates, our numerical results show that the RULAs's optimal rotation brings substantial performance gains in terms of mean per-user spectral efficiency. The improvement grows with the strength of the line-of-sight components of the channel vectors. Given the total number of antenna elements, we study the trade-off between the number of APs and the number of antenna elements per AP, revealing an optimal number of APs for the cases of APs equipped with static ULAs and RULAs.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Dispersive interaction between two atoms in Proca Quantum Electrodynamics
Authors:
Gabriel Camacho de Pinho,
Carlos Augusto Domingues Zarro,
Carlos Farina,
Reinaldo de Melo e Souza,
Maurício Hippert
Abstract:
We analyze the influence of a massive photon in the dispersive interaction between two atoms in their fundamental states. We work in the context of Proca Quantum Electrodynamics. The photon mass not only introduces a new length scale but also gives rise to a longitudinal polarization for the electromagnetic field. We obtain explicitly the interaction energy between the atoms for any distance regim…
▽ More
We analyze the influence of a massive photon in the dispersive interaction between two atoms in their fundamental states. We work in the context of Proca Quantum Electrodynamics. The photon mass not only introduces a new length scale but also gives rise to a longitudinal polarization for the electromagnetic field. We obtain explicitly the interaction energy between the atoms for any distance regime and consider several particular cases. We show that, for a given interatomic distance, the greater the photon mass the better it is the non-retarded approximation.
△ Less
Submitted 10 June, 2024;
originally announced June 2024.
-
LR-FHSS-Sim: A Discrete-Event Simulator for LR-FHSS Networks
Authors:
Jean Michel de Souza Sant Ana,
Arliones Hoeller Jr.,
Hirley Alves,
Richard Demo Souza
Abstract:
This work presents the LR-FHSS-Sim, a free and open-source discrete-event simulator for LR-FHSS networks. We highlight the importance of network modeling for IoT coverage, especially when it is needed to capture dynamic network behaviors. Written in Python, we present the LR-FHSS-Sim main structure, procedures, and extensions. We discuss the importance of a modular code, which facilitates the crea…
▽ More
This work presents the LR-FHSS-Sim, a free and open-source discrete-event simulator for LR-FHSS networks. We highlight the importance of network modeling for IoT coverage, especially when it is needed to capture dynamic network behaviors. Written in Python, we present the LR-FHSS-Sim main structure, procedures, and extensions. We discuss the importance of a modular code, which facilitates the creation of algorithmic strategies and signal-processing techniques for LR-FHSS networks. Moreover, we showcase how to achieve results when considering different packet generation traffic patterns and with a previously published extension. Finally, we discuss our thoughts on future implementations and what can be achieved with them.
△ Less
Submitted 15 April, 2024;
originally announced April 2024.
-
Assessment of the Sparsity-Diversity Trade-offs in Active Users Detection for mMTC
Authors:
Gabriel Martins de Jesus,
Onel Luis Alcaraz Lopez,
Richard Demo Souza,
Nurul Huda Mahmood,
Markku Juntti,
Matti Latva-Aho
Abstract:
Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsi…
▽ More
Wireless communication systems must increasingly support a multitude of machine-type communications (MTC) devices, thus calling for advanced strategies for active user detection (AUD). Recent literature has delved into AUD techniques based on compressed sensing, highlighting the critical role of signal sparsity. This study investigates the relationship between frequency diversity and signal sparsity in the AUD problem. Single-antenna users transmit multiple copies of non-orthogonal pilots across multiple frequency channels and the base station independently performs AUD in each channel using the orthogonal matching pursuit algorithm. We note that, although frequency diversity may improve the likelihood of successful reception of the signals, it may also damage the channel sparsity level, leading to important trade-offs. We show that a sparser signal significantly benefits AUD, surpassing the advantages brought by frequency diversity in scenarios with limited temporal resources and/or high numbers of receive antennas. Conversely, with longer pilots and fewer receive antennas, investing in frequency diversity becomes more impactful, resulting in a tenfold AUD performance improvement.
△ Less
Submitted 8 February, 2024;
originally announced February 2024.
-
On the Spectral Efficiency of Indoor Wireless Networks with a Rotary Uniform Linear Array
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained…
▽ More
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained traction among the research community. By moving in a confined region, movable antennas are able to exploit the wireless channel variation in the continuous domain. This additional degree of freedom may enhance the quality of the wireless links, and consequently the communication performance. However, movable antennas for MU-MIMO proposed in the literature are complex, bulky, expensive and present a high power consumption. In this paper, we propose an alternative to such systems that has lower complexity and lower cost. More specifically, we propose the incorporation of rotation capabilities to APs equipped with Uniform Linear Arrays (ULAs) of antennas. We consider the uplink of an indoor scenario where the AP serves multiple devices simultaneously. The optimal rotation of the ULA is computed based on estimates of the positions of the active devices and aiming at maximizing the per-user mean achievable Spectral Efficiency (SE). Adopting a spatially correlated Rician channel model, our numerical results show that the rotation capabilities of the AP can bring substantial improvements in the SE in scenarios where the line-of-sight component of the channel vectors is strong. Moreover, our proposed system is robust against imperfect positioning estimates.
△ Less
Submitted 25 June, 2024; v1 submitted 8 February, 2024;
originally announced February 2024.
-
High-Power and Safe RF Wireless Charging: Cautious Deployment and Operation
Authors:
Onel L. A. López,
Osmel M. Rosabal,
Amirhossein Azarbahram,
A. Basit Khattak,
Mehdi Monemi,
Richard D. Souza,
Petar Popovski,
Matti Latva-aho
Abstract:
The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT…
▽ More
The wired charging and the need for battery replacements are critical barriers to unlimited, scalable, and sustainable mobile connectivity, motivating the interest in radio frequency (RF) wireless power transfer (WPT) technology. However, the inherently low end-to-end power transfer efficiency (PTE) and health/safety-related apprehensions about the technology are critical obstacles. Indeed, RF-WPT implementation and operation require efficient and cautious strategies and protocols, especially when targeting high-power charging, which constitutes the scope of this work. Herein, we overview the main factors affecting the end-to-end PTE of RF-WPT systems and their multiplicative effect and interdependencies. Moreover, we discuss key electromagnetic field (EMF) exposure metrics, safety limits, and approaches for efficient and EMF-aware deployment and operation. Quantitatively, we show that near-field RF charging may significantly reduce EMF exposure, and thus must be promoted. We also present our vision of a cyber-physical system for efficient and safe wireless charging, specify key components and their interrelation, and illustrate numerically the PTE attained by two modern low-power multi-antenna architectures in a simple setup. Throughout the paper, we highlight the need for high end-to-end PTE architectures and charging protocols transparently complying with EMF exposure regulations and outline relevant challenges and research directions. This work expands the vision and understanding of modern RF-WPT technology and constitutes a step towards making the technology attractive for worldwide commercial exploitation.
△ Less
Submitted 20 September, 2023;
originally announced November 2023.
-
Energy-Aware Federated Learning with Distributed User Sampling and Multichannel ALOHA
Authors:
Rafael Valente da Silva,
Onel L. Alcaraz López,
Richard Demo Souza
Abstract:
Distributed learning on edge devices has attracted increased attention with the advent of federated learning (FL). Notably, edge devices often have limited battery and heterogeneous energy availability, while multiple rounds are required in FL for convergence, intensifying the need for energy efficiency. Energy depletion may hinder the training process and the efficient utilization of the trained…
▽ More
Distributed learning on edge devices has attracted increased attention with the advent of federated learning (FL). Notably, edge devices often have limited battery and heterogeneous energy availability, while multiple rounds are required in FL for convergence, intensifying the need for energy efficiency. Energy depletion may hinder the training process and the efficient utilization of the trained model. To solve these problems, this letter considers the integration of energy harvesting (EH) devices into a FL network with multi-channel ALOHA, while proposing a method to ensure both low energy outage probability and successful execution of future tasks. Numerical results demonstrate the effectiveness of this method, particularly in critical setups where the average energy income fails to cover the iteration cost. The method outperforms a norm based solution in terms of convergence time and battery level.
△ Less
Submitted 12 September, 2023;
originally announced September 2023.
-
Trade-Off Between Beamforming and Macro-Diversity Gains in Distributed mMIMO
Authors:
Eduardo Noboro Tominaga,
Hsuan-Jung Su,
Jinfeng Du,
Sivarama Venkatesan,
Richard Demo Souza,
Hirley Alves
Abstract:
Industry and academia have been working towards the evolution from Centralized massive Multiple-Input Multiple-Output (CmMIMO) to Distributed mMIMO (DmMIMO) architectures. Instead of splitting a coverage area into many cells, each served by a single Base Station equipped with several antennas, the whole coverage area is jointly covered by several Access Points (AP) equipped with few or single ante…
▽ More
Industry and academia have been working towards the evolution from Centralized massive Multiple-Input Multiple-Output (CmMIMO) to Distributed mMIMO (DmMIMO) architectures. Instead of splitting a coverage area into many cells, each served by a single Base Station equipped with several antennas, the whole coverage area is jointly covered by several Access Points (AP) equipped with few or single antennas. Nevertheless, when choosing between deploying more APs with few or single antennas or fewer APs equipped with many antennas, one observes an inherent trade-off between the beamforming and macro-diversity gains that has not been investigated in the literature. Given a total number of antenna elements and total downlink power, under a channel model that takes into account a probability of Line-of-Sight (LoS) as a function of the distance between the User Equipments (UEs) and APs, our numerical results show that there exists a ``sweet spot" on the optimal number of APs and of antenna elements per AP which is a function of the physical dimensions of the coverage area.
△ Less
Submitted 10 September, 2023;
originally announced September 2023.
-
Energy Beamforming for RF Wireless Power Transfer with Dynamic Metasurface Antennas
Authors:
Amirhossein Azarbahram,
Onel L. A. Lopez,
Richard D. Souza,
Rui Zhang,
Matti Latva-Aho
Abstract:
Radio frequency (RF) wireless power transfer (WPT) is a promising technology for charging the Internet of Things. Practical RF-WPT systems usually require energy beamforming (EB), which can compensate for the severe propagation loss by directing beams toward the devices. The EB flexibility depends on the transmitter architecture, existing a trade-off between cost/complexity and degrees of freedom.…
▽ More
Radio frequency (RF) wireless power transfer (WPT) is a promising technology for charging the Internet of Things. Practical RF-WPT systems usually require energy beamforming (EB), which can compensate for the severe propagation loss by directing beams toward the devices. The EB flexibility depends on the transmitter architecture, existing a trade-off between cost/complexity and degrees of freedom. Thus, simpler architectures such as dynamic metasurface antennas (DMAs) are gaining attention. Herein, we consider an RF-WPT system with a transmit DMA for meeting the energy harvesting requirements of multiple devices and formulate an optimization problem for the minimum-power design. First, we provide a mathematical model to capture the frequency-dependant signal propagation effect in the DMA architecture. Next, we propose a solution based on semi-definite programming and alternating optimization. Results show that a DMA-based structure can outperform a fully-digital implementation and that the required transmit power decreases with the antenna array size, while it increases and remains almost constant with frequency in DMA and FD, respectively.
△ Less
Submitted 13 December, 2023; v1 submitted 3 July, 2023;
originally announced July 2023.
-
Age-of-Information Dependent Random Access in NOMA-Aided Multiple-Relay Slotted ALOHA
Authors:
Gabriel Germino Martins de Jesus,
João Luiz Rebelatto,
Richard Demo Souza,
Onel Luis Alcaraz López
Abstract:
We propose and evaluate the performance of a Non-Orthogonal Multiple Access (NOMA) dual-hop multiple relay (MR) network from an information freshness perspective using the Age of Information (AoI) metric. More specifically, we consider an age dependent (AD) policy, named as AD-NOMA- MR, in which users only transmit, with a given probability, after they reach a certain age threshold. The packets se…
▽ More
We propose and evaluate the performance of a Non-Orthogonal Multiple Access (NOMA) dual-hop multiple relay (MR) network from an information freshness perspective using the Age of Information (AoI) metric. More specifically, we consider an age dependent (AD) policy, named as AD-NOMA- MR, in which users only transmit, with a given probability, after they reach a certain age threshold. The packets sent by the users are potentially received by the relays, and then forwarded to a common sink in a NOMA fashion by randomly selecting one of the available power levels, and multiple packets are received if all selected levels are unique. We derive analytical expressions for the average AoI of AD-NOMA-MR. Through numerical and simulation results, we show that the proposed policy can improve the average AoI up to 76.6% when compared to a previously proposed AD Orthogonal Multiple Access MR policy.
△ Less
Submitted 18 April, 2023;
originally announced April 2023.
-
Performance Analysis of Centralized and Distributed Massive MIMO for MTC
Authors:
Eduardo Noboro Tominaga,
Onel Luiz Alcaraz López,
Hirley Alves,
Richard Demo Souza,
Leonardo Terças
Abstract:
Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and ac…
▽ More
Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and academia are working on the evolution from conventional Centralized mMIMO (CmMIMO) to Distributed mMIMO (DmMIMO) architectures for the Sixth Generation (6G) of wireless networks. Under this new paradigm, several Access Points (APs) are distributed in the coverage area, and all jointly cooperate to serve the active devices. Aiming at Machine-Type Communication (MTC) use cases, we compare the performance of CmMIMO and different DmMIMO deployments in an indoor industrial scenario considering regular and alarm traffic patterns for MTC. Our simulation results show that DmMIMO's performance is often superior to CmMIMO. However, the traditional CmMIMO can outperform DmMIMO when the devices' channels are highly correlated.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Performance Analysis of ML-based MTC Traffic Pattern Predictors
Authors:
David E. Ruiz-Guirola,
Onel L. A. Lopez,
Samuel Montejo-Sanchez,
Richard Demo Souza,
Mehdi Bennis
Abstract:
Prolonging the lifetime of massive machine-type communication (MTC) networks is key to realizing a sustainable digitized society. Great energy savings can be achieved by accurately predicting MTC traffic followed by properly designed resource allocation mechanisms. However, selecting the proper MTC traffic predictor is not straightforward and depends on accuracy/complexity trade-offs and the speci…
▽ More
Prolonging the lifetime of massive machine-type communication (MTC) networks is key to realizing a sustainable digitized society. Great energy savings can be achieved by accurately predicting MTC traffic followed by properly designed resource allocation mechanisms. However, selecting the proper MTC traffic predictor is not straightforward and depends on accuracy/complexity trade-offs and the specific MTC applications and network characteristics. Remarkably, the related state-of-the-art literature still lacks such debates. Herein, we assess the performance of several machine learning (ML) methods to predict Poisson and quasi-periodic MTC traffic in terms of accuracy and computational cost. Results show that the temporal convolutional network (TCN) outperforms the long-short term memory (LSTM), the gated recurrent units (GRU), and the recurrent neural network (RNN), in that order. For Poisson traffic, the accuracy gap between the predictors is larger than under quasi-periodic traffic. Finally, we show that running a TCN predictor is around three times more costly than other methods, while the training/inference time is the greatest/least.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Energy-Efficient Wake-Up Signalling for Machine-Type Devices Based on Traffic-Aware Long-Short Term Memory Prediction
Authors:
David E. Ruíz-Guirola,
Carlos A. Rodríguez-López,
Samuel Montejo-Sánchez,
Richard Demo Souza,
Onel L. A. López,
Hirley Alves
Abstract:
Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt…
▽ More
Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt to the system dynamics. To overcome this, we design a simple but efficient neural network to predict MTC traffic patterns and configure WuS accordingly. Our proposed forecasting WuS (FWuS) leverages an accurate long-short term memory (LSTM)- based traffic prediction that allows extending the sleep time of MTDs by avoiding frequent page monitoring occasions in idle state. Simulation results show the effectiveness of our approach. The traffic prediction errors are shown to be below 4%, being false alarm and miss-detection probabilities respectively below 8.8% and 1.3%. In terms of energy consumption reduction, FWuS can outperform the best benchmark mechanism in up to 32%. Finally, we certify the ability of FWuS to dynamically adapt to traffic density changes, promoting low-power MTC scalability
△ Less
Submitted 13 June, 2022;
originally announced June 2022.
-
Statistical Analysis of Received Signal Strength in Industrial IoT Distributed Massive MIMO Systems
Authors:
Eduardo Noboro Tominaga,
Onel Luiz Alcaraz López,
Richard Demo Souza,
Hirley Alves
Abstract:
The Fifth Generation (5G) of wireless networks introduced native support for Machine-Type Communication (MTC), which is a key enabler for the Internet of Things (IoT) revolution. Current 5G standards are not yet capable of fully satisfying the requirements of critical MTC (cMTC) and massive MTC (mMTC) use cases. This is the main reason why industry and academia have already started working on tech…
▽ More
The Fifth Generation (5G) of wireless networks introduced native support for Machine-Type Communication (MTC), which is a key enabler for the Internet of Things (IoT) revolution. Current 5G standards are not yet capable of fully satisfying the requirements of critical MTC (cMTC) and massive MTC (mMTC) use cases. This is the main reason why industry and academia have already started working on technical solutions for beyond-5G and Sixth Generation (6G) networks. One technological solution that has been extensively studied is the combination of network densification, massive Multiple-Input Multiple-Output (mMIMO) systems and user-centric design, which is known as distributed mMIMO or Cell-Free (CF) mMIMO. Under this new paradigm, there are no longer cell boundaries: all the Access Points (APs) on the network cooperate to jointly serve all the devices. In this paper, we compare the performance of traditional mMIMO and different distributed mMIMO setups, and quantify the macro diversity and signal spatial diversity performance they provide. Aiming at the uplink in industrial indoor scenarios, we adopt a path loss model based on real measurement campaigns. Monte Carlo simulation results show that the grid deployment of APs provide higher average channel gains, but radio stripes deployments provide lower variability of the received signal strength.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
Coordinated Pilot Transmissions for Detecting the Signal Sparsity Level in a Massive IoT Network under Rayleigh Fading
Authors:
Onel L. A. López,
Glauber Brante,
Richard D. Souza,
Markku Juntti,
Matti Latva-aho
Abstract:
Grant-free protocols exploiting compressed sensing (CS) multi-user detection (MUD) are appealing for solving the random access problem in massive machine-type communications (mMTC) with sporadic device activity. Such protocols would greatly benefit from a prior deterministic knowledge of the sparsity level, i.e., instantaneous number of simultaneously active devices $K$. Aiming at this, herein we…
▽ More
Grant-free protocols exploiting compressed sensing (CS) multi-user detection (MUD) are appealing for solving the random access problem in massive machine-type communications (mMTC) with sporadic device activity. Such protocols would greatly benefit from a prior deterministic knowledge of the sparsity level, i.e., instantaneous number of simultaneously active devices $K$. Aiming at this, herein we introduce a framework relying on coordinated pilot transmissions (CPT) over a short phase at the beginning of the transmission block for detecting $K$ in mMTC scenarios under Rayleigh fading. CPT can be implemented either as: i) U-CPT, which exploits only uplink transmissions, or A-CPT, which includes also downlink transmissions for channel state information (CSI) acquisition that resolve fading uncertainty. We discuss two specific implementations of A-CPT: ii) A-CPT-F, which implements CSI-based phase corrections while leveraging the same statistical inverse power control used by U-CPT, and iii) A-CPT-D, which implements a dynamic CSI-based inverse power control, although it requires some active devices to remain in silence if their corresponding channels are too faded. We derive a signal sparsity level detector for each CPT mechanism by relaxing the original integer detection/classification problem to an estimation problem in the continuous real domain followed by a rounding operation. We show that the variance of the relaxed estimator increases with $K^2$ and $K$ when operating with U-CPT and A-CPT mechanisms, respectively. The distribution of the estimators under U-CPT, A-CPT-F and A-CPT-D is found to follow an exponential, Gaussian, and Student's $t-$like distribution, respectively. Analyses evince the superiority of A-CPT-D, which is also corroborated via numerical results. We reveal several interesting trade-offs and highlight potential research directions.
△ Less
Submitted 1 May, 2022;
originally announced May 2022.
-
Periodic strings: a mechanical analogy to photonic and phononic crystals
Authors:
R. S. Pitombo,
M. Vasconcellos,
P. P. Abrantes,
Reinaldo de Melo e Souza,
G. M. Penello,
C. Farina
Abstract:
We study a periodic vibrating string composed of a finite sequence of string segments connected periodically, with each segment characterized by a constant linear mass density. The main purpose is to provide a configuration that can mimic the properties of photonic or phononic crystals and could be implemented in undergraduate physics laboratories. We demonstrate that this configuration displays f…
▽ More
We study a periodic vibrating string composed of a finite sequence of string segments connected periodically, with each segment characterized by a constant linear mass density. The main purpose is to provide a configuration that can mimic the properties of photonic or phononic crystals and could be implemented in undergraduate physics laboratories. We demonstrate that this configuration displays frequency intervals for which wave propagation is not allowed (frequency bandgaps), in close analogy to photonic and phononic crystals. We discuss the behavior of these bandgaps when varying physical parameters, such as the values of the linear mass densities, the oscillation frequency, and the number of strings constituting the entire system. Some analogies with the propagation of electronic waves through a crystal lattice in condensed matter physics are also explored.
△ Less
Submitted 10 April, 2022;
originally announced April 2022.
-
Dynamical Casimir effects with atoms: from the emission of photon pairs to geometric phases
Authors:
François Impens,
Reinaldo de Melo e Souza,
Guilherme C. Matos,
Paulo A. Maia Neto
Abstract:
The coupling between a moving ground-state atom and the quantum electromagnetic field is at the origin of several intriguing phenomena ranging from the dynamical Casimir emission of photons to Sagnac-like geometric phase shifts in atom interferometers. Recent progress in this emerging field reveals unprecedented connections between non-trivial aspects of modern physics such as electrodynamic retar…
▽ More
The coupling between a moving ground-state atom and the quantum electromagnetic field is at the origin of several intriguing phenomena ranging from the dynamical Casimir emission of photons to Sagnac-like geometric phase shifts in atom interferometers. Recent progress in this emerging field reveals unprecedented connections between non-trivial aspects of modern physics such as electrodynamic retardation, non-unitary evolution in open quantum systems, geometric phases, non-locality and inertia.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Quantum Vacuum Sagnac Effect
Authors:
Guilherme C. Matos,
Reinaldo de Melo e Souza,
Paulo A. Maia Neto,
François Impens
Abstract:
We report on the quantum electrodynamical analogue of a Sagnac phase induced by the fast rotation of a neutral nanoparticle onto atomic waves propagating in its vicinity. The quantum vacuum Sagnac phase is a geometric Berry phase proportional to the angular velocity of rotation. The persistence of a noninertial effect into the inertial frame is also analogous to the Aharonov-Bohm effect. Here, a r…
▽ More
We report on the quantum electrodynamical analogue of a Sagnac phase induced by the fast rotation of a neutral nanoparticle onto atomic waves propagating in its vicinity. The quantum vacuum Sagnac phase is a geometric Berry phase proportional to the angular velocity of rotation. The persistence of a noninertial effect into the inertial frame is also analogous to the Aharonov-Bohm effect. Here, a rotation confined to a restricted domain of space gives rise to an atomic phase even though the interferometer is at rest with respect to an inertial frame. By taking advantage of a plasmon resonance, we show that the magnitude of the induced phase can be close to the sensitivity limit of state of the art interferometers. The quantum vacuum Sagnac atomic phase is a geometric footprint of a dynamical Casimir-like effect
△ Less
Submitted 6 January, 2022; v1 submitted 3 December, 2021;
originally announced December 2021.
-
Green's function approach to the Bose-Hubbard model with disorder
Authors:
Renan da Silva Souza,
Axel Pelster,
Francisco E. A. dos Santos
Abstract:
We analyse the distinction between the three different ground states presented by a system of spinless bosons with short-range interactions submitted to a random potential using the disordered Bose-Hubbard model. The criteria for identifying the superfluid, the Mott-insulator, and the Bose-glass phases at finite temperatures are discussed for small values of the kinetic energy associated with the…
▽ More
We analyse the distinction between the three different ground states presented by a system of spinless bosons with short-range interactions submitted to a random potential using the disordered Bose-Hubbard model. The criteria for identifying the superfluid, the Mott-insulator, and the Bose-glass phases at finite temperatures are discussed for small values of the kinetic energy associated with the tunnelling of particles between potential wells. Field theoretical considerations are applied in order to construct a diagrammatic hopping expansion to the finite-temperature Green's function. By performing a summation of subsets of diagrams we are able to find the condition to the long-range correlations which leads to the phase boundary between superfluid and insulating phases. The perturbative expression to the local correlations allows us to calculate an approximation to the single-particle density of states of low-energy excitations in the presence of small hopping, which characterizes unambiguously the distinction between the Mott-insulator and the Bose-glass phases. We obtain the phase diagram for bounded on-site disorder. It is demonstrated that our analysis is capable of going beyond the mean-field theory results for the classification of these different ground states.
△ Less
Submitted 30 August, 2021;
originally announced August 2021.
-
Exploring the Non-Overlapping Visibility Regions in XL-MIMO Random Access Protocol
Authors:
José Carlos Marinello Filho,
Glauber Brante,
Richard Demo Souza,
Taufik Abrão
Abstract:
The recent extra-large scale massive multiple-input multiple-output (XL-MIMO) systems are seen as a promising technology for providing very high data rates in increased user-density scenarios. Spatial non-stationarities and visibility regions (VRs) appear across the XL-MIMO array since its large dimension is of the same order as the distances to the user-equipments (UEs). Due to the increased dens…
▽ More
The recent extra-large scale massive multiple-input multiple-output (XL-MIMO) systems are seen as a promising technology for providing very high data rates in increased user-density scenarios. Spatial non-stationarities and visibility regions (VRs) appear across the XL-MIMO array since its large dimension is of the same order as the distances to the user-equipments (UEs). Due to the increased density of UEs in typical applications of XL-MIMO systems and the scarcity of pilots, the design of random access (RA) protocols and scheduling algorithms become challenging. In this paper, we propose a joint RA and scheduling protocol, namely non-overlapping VR XL- MIMO (NOVR-XL) RA protocol, which takes advantage of the different VRs of the UEs for improving RA performance, besides seeking UEs with non-overlapping VRs to be scheduled in the same payload data pilot resource. Our results reveal that the proposed scheme achieves significant gains in terms of sum rate compared with traditional RA schemes, as well as reducing access latency and improving connectivity performance as a whole.
△ Less
Submitted 19 July, 2021;
originally announced July 2021.
-
Controlling the atom-sphere interaction with an external electric field
Authors:
P. P. Abrantes,
V. Pessanha,
Reinaldo de Melo e Souza,
C. Farina
Abstract:
We investigate the system constituted by a polarizable atom near a nanosphere under the influence of an external electrostatic field, showing that the attractive dispersive force between them can be overcome by the electrostatic interaction. Therefore, in addition to the advantageous possibility of actively tuning the resultant force with an external agent without the requirement of physical conta…
▽ More
We investigate the system constituted by a polarizable atom near a nanosphere under the influence of an external electrostatic field, showing that the attractive dispersive force between them can be overcome by the electrostatic interaction. Therefore, in addition to the advantageous possibility of actively tuning the resultant force with an external agent without the requirement of physical contact, this force may also become repulsive. We analyze this situation in different physical regimes of distance and explore the interaction of different atoms with both metallic and dielectric spheres, discussing which cases are easier to control. Furthermore, our results reveal that these repulsive forces can be achieved with feasible field intensities in the laboratory.
△ Less
Submitted 25 August, 2021; v1 submitted 9 July, 2021;
originally announced July 2021.
-
Network-Coded Cooperative LoRa Network with D2D Communication
Authors:
L. H. O. Alves,
J. L. Rebelatto,
R. D. Souza,
G. Brante
Abstract:
We evaluate the outage probability and the energy efficiency (EE) of a LoRa network when the end-devices (EDs) are capable of exchanging messages with a device-to-device (D2D) technology. Our proposal is to assess the performance of the network when operating under the concept of network-coded cooperation (NCC), where the EDs are capable of transmitting linear combinations of more than one frame (…
▽ More
We evaluate the outage probability and the energy efficiency (EE) of a LoRa network when the end-devices (EDs) are capable of exchanging messages with a device-to-device (D2D) technology. Our proposal is to assess the performance of the network when operating under the concept of network-coded cooperation (NCC), where the EDs are capable of transmitting linear combinations of more than one frame (including frames of another ED), performed over a non-binary finite field. We consider both connection and collision probabilities when modelling the outage probability of an ED, as well as a realistic power consumption model to evaluate the EE. Our results indicate that the proposed scheme, which we refer to as NCC-LoRa, provides considerable gains in terms of both outage probability and EE when compared to a regular LoRa network, even when considering the additional consumption of D2D communication.
△ Less
Submitted 7 December, 2021; v1 submitted 6 July, 2021;
originally announced July 2021.
-
Massive Wireless Energy Transfer with Multiple Power Beacons for very large Internet of Things
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves,
Richard D. Souza,
Samuel Montejo-Sánchez
Abstract:
The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering…
▽ More
The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering massive IoT networks, thus eliminating the need for frequent battery replacement by using the so-called power beacons (PBs). In this paper, we provide a framework for minimizing the sum transmit power of the PBs using devices' positions information and their current battery state. Our strategy aims to reduce the PBs' power consumption and to mitigate the possible impact of the electromagnetic radiation on human health. We also present analytical insights for the case of very distant clusters and evaluate their applicability. Numerical results show that our proposed framework reduces the outage probability as the number of PBs and/or the energy demands increase.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Massive MIMO with Radio Stripes for Indoor Wireless Energy Transfer
Authors:
Onel L. A. López,
Dileep Kumar,
Richard Demo Souza,
Petar Popovski,
Antti Tölli,
Matti Latva-aho
Abstract:
Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approx…
▽ More
Radio frequency wireless energy transfer (WET) is a promising solution for powering autonomous Internet of Things (IoT) deployments. In this work, we leverage energy beamforming for powering multiple user equipments (UEs) with stringent energy harvesting (EH) demands in an indoor distributed massive multiple-input multiple-output system. Based on semi-definite programming, successive convex approximation (SCA), and maximum ratio transmission (MRT) techniques, we derive optimal and sub-optimal precoders aimed at minimizing the radio stripes' transmit power while exploiting information of the power transfer efficiency of the EH circuits at the UEs. Moreover, we propose an analytical framework to assess and control the electromagnetic field (EMF) radiation exposure in the considered indoor scenario. Numerical results show that i) the EMF radiation exposure can be more easily controlled at higher frequencies at the cost of a higher transmit power consumption, ii) training is not a very critical factor for the considered indoor system, iii) MRT/SCA-based precoders are particularly appealing when serving a small number of UEs, thus, especially suitable for implementation in a time domain multiple access (TDMA) scheduling framework, and iv) TDMA is more efficient than spatial domain multiple access (SDMA) when serving a relatively small number of UEs. Results suggest that additional boosting performance strategies are needed to increase the overall system efficiency, thus making the technology viable in practice.
△ Less
Submitted 28 February, 2022; v1 submitted 23 June, 2021;
originally announced June 2021.
-
CSI-free Rotary Antenna Beamforming for Massive RF Wireless Energy Transfer
Authors:
Onel L. A. López,
Hirley Alves,
Samuel Montejo-Sánchez,
Richard D. Souza,
Matti Latva-aho
Abstract:
Radio frequency (RF) wireless energy transfer (WET) is a key technology that may allow seamlessly powering future massive low-energy Internet of Things (IoT) networks. To enable efficient massive WET, channel state information (CSI)-limited/free multi-antenna transmit schemes have been recently proposed in the literature. The idea is to reduce/null the energy costs to be paid by energy harvesting…
▽ More
Radio frequency (RF) wireless energy transfer (WET) is a key technology that may allow seamlessly powering future massive low-energy Internet of Things (IoT) networks. To enable efficient massive WET, channel state information (CSI)-limited/free multi-antenna transmit schemes have been recently proposed in the literature. The idea is to reduce/null the energy costs to be paid by energy harvesting (EH) IoT nodes from participating in large-scale time/power-consuming CSI training, but still enable some transmit spatial gains. In this paper, we take another step forward by proposing a novel CSI-free rotary antenna beamforming (RAB) WET scheme that outperforms all state-of-the-art CSI-free schemes in a scenario where a power beacon (PB) equipped with a uniform linear array (ULA) powers a large set of surrounding EH IoT devices. RAB uses a properly designed CSI-free beamformer combined with a continuous or periodic rotation of the ULA at the PB to provide average EH gains that scale as $0.85\sqrt{M}$, where $M$ is the number of PB's antenna elements. Moreover, a rotation-specific power control mechanism was proposed to i) fairly optimize the WET process if devices' positioning information is available, and/or ii) to avoid hazards to human health in terms of specific absorption rate (SAR). We show that RAB performance even approaches quickly (or surpasses, for scenarios with sufficiently large number of EH devices, or when using the proposed power control) the performance of a traditional full-CSI based transmit scheme, and it is also less sensitive to SAR constraints. Finally, we discuss important practicalities related to RAB such as its robustness against non line-of-sight conditions compared to other CSI-free WET schemes, and its generalizability to scenarios where the PB uses other than a ULA topology.
△ Less
Submitted 27 August, 2021; v1 submitted 26 April, 2021;
originally announced April 2021.
-
Improving 6TiSCH Reliability and Latency with Simultaneous Multi-Band Operation
Authors:
Marcus Vinicius Bunn,
Richard Demo Souza,
Guilherme Luiz Moritz
Abstract:
The Internet Engineering Task Force (IETF) group "IPv6 over the TSCH mode of IEEE 802.15.4e" (6TiSCH) introduced a protocol, utilizing Time-Slotted Channel Hopping (TSCH) from IEEE802.15.4e due to its high reliability and time-deterministic characteristic, that achieves industrial performance requirements while offering the benefits of IP connectivity. This work proposes the addition of a second r…
▽ More
The Internet Engineering Task Force (IETF) group "IPv6 over the TSCH mode of IEEE 802.15.4e" (6TiSCH) introduced a protocol, utilizing Time-Slotted Channel Hopping (TSCH) from IEEE802.15.4e due to its high reliability and time-deterministic characteristic, that achieves industrial performance requirements while offering the benefits of IP connectivity. This work proposes the addition of a second radio interface in 6TiSCH devices to operate a parallel network in sub-GHz, introducing transmit diversity while benefiting from decreased path-loss and reduced interference. Simulation results show an improvement of 25% in Packet Delivery Ratio (PDR) and closely to 30% in latency in different 6TiSCH networks scenarios.
△ Less
Submitted 26 April, 2021;
originally announced April 2021.
-
The Diversity of Gamification Evaluation in the Software Engineering Education and Industry: Trends, Comparisons and Gaps
Authors:
Rodrigo Henrique Barbosa Monteiro,
Maurício Ronny de Almeida Souza,
Sandro Ronaldo Bezerra Oliveira,
Carlos dos Santos Portela,
Cesar Elias de Cristo Lobato
Abstract:
Gamification has been used to motivate and engage participants in software engineering education and practice activities. There is a significant demand for empirical studies for the understanding of the impacts and efficacy of gamification. However, the lack of standard procedures and models for the evaluation of gamification is a challenge for the design, comparison, and report of results related…
▽ More
Gamification has been used to motivate and engage participants in software engineering education and practice activities. There is a significant demand for empirical studies for the understanding of the impacts and efficacy of gamification. However, the lack of standard procedures and models for the evaluation of gamification is a challenge for the design, comparison, and report of results related to the assessment of gamification approaches and its effects. The goal of this study is to identify models and strategies for the evaluation of gamification reported in the literature. To achieve this goal, we conducted a systematic mapping study to investigate strategies for the evaluation of gamification in the context of software engineering. We selected 100 primary studies on gamification in software engineering (from 2011 to 2020). We categorized the studies regarding the presence of evaluation procedures or models for the evaluation of gamification, the purpose of the evaluation, the criteria used, the type of data, instruments, and procedures for data analysis. Our results show that 64 studies report procedures for the evaluation of gamification. However, only three studies actually propose evaluation models for gamification. We observed that the evaluation of gamification focuses on two aspects: the evaluation of the gamification strategy itself, related to the user experience and perceptions; and the evaluation of the outcomes and effects of gamification on its users and context. The most recurring criteria for the evaluation are 'engagement', 'motivation', 'satisfaction', and 'performance'. Finally, the evaluation of gamification requires a mix of subjective and objective inputs, and qualitative and quantitative data analysis approaches. Depending of the focus of the evaluation (the strategy or the outcomes), there is a predominance of a type of data and analysis.
△ Less
Submitted 9 February, 2021;
originally announced February 2021.
-
Network Slicing for eMBB and mMTC with NOMA and Space Diversity Reception
Authors:
Eduardo Noboro Tominaga,
Hirley Alves,
Onel Luiz Alcaraz López,
Richard Demo Souza,
João Luiz Rebelatto,
Matti Latva-Aho
Abstract:
In this work we study the coexistence in the same Radio Access Network (RAN) of two generic services present in the Fifth Generation (5G) of wireless communication systems: enhanced Mobile BroadBand (eMBB) and massive Machine-Type Communications (mMTC). eMBB services are requested for applications that demand extremely high data rates and moderate requirements on latency and reliability, whereas m…
▽ More
In this work we study the coexistence in the same Radio Access Network (RAN) of two generic services present in the Fifth Generation (5G) of wireless communication systems: enhanced Mobile BroadBand (eMBB) and massive Machine-Type Communications (mMTC). eMBB services are requested for applications that demand extremely high data rates and moderate requirements on latency and reliability, whereas mMTC enables applications for connecting a massive number of low-power and low-complexity devices. The coexistence of both services is enabled by means of network slicing and Non-Orthogonal Multiple Access (NOMA) with Successive Interference Cancellation (SIC) decoding. Under the orthogonal slicing, the radio resources are exclusively allocated to each service, while in the non-orthogonal slicing the traffics from both services overlap in the same radio resources. We evaluate the uplink performance of both services in a scenario with a multi-antenna Base Station (BS). Our simulation results show that the performance gains obtained through multiple receive antennas are more accentuated for the non-orthogonal slicing than for the orthogonal allocation of resources, such that the non-orthogonal slicing outperforms its orthogonal counterpart in terms of achievable data rates or number of connected devices as the number of receive antennas increases.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
Non-Orthogonal Multiple Access and Network Slicing: Scalable Coexistence of eMBB and URLLC
Authors:
Eduardo Noboro Tominaga,
Hirley Alves,
Richard Demo Souza,
João Luiz Rebelatto,
Matti Latva-Aho
Abstract:
The 5G systems will feature three generic services: enhanced Mobile BroadBand (eMBB), massive Machine-Type Communications (mMTC) and Ultra-Reliable and Low-Latency Communications (URLLC). The diverse requirements of these services in terms of data-rates, number of connected devices, latency and reliability can lead to a sub-optimal use of the 5G network, thus network slicing is proposed as a solut…
▽ More
The 5G systems will feature three generic services: enhanced Mobile BroadBand (eMBB), massive Machine-Type Communications (mMTC) and Ultra-Reliable and Low-Latency Communications (URLLC). The diverse requirements of these services in terms of data-rates, number of connected devices, latency and reliability can lead to a sub-optimal use of the 5G network, thus network slicing is proposed as a solution that creates customized slices of the network specifically designed to meet the requirements of each service. Under the network slicing, the radio resources can be shared in orthogonal and non-orthogonal schemes. Motivated by Industrial Internet of Things (IIoT) scenarios where a large number of sensors may require connectivity with stringent requirements of latency and reliability, we propose the use of Non-Orthogonal Multiple Access (NOMA) to improve the number of URLLC users that are connected in the uplink to the same base station (BS), for both orthogonal and non-orthogonal network slicing with eMBB users. The multiple URLLC users transmit simultaneously and across multiple frequency channels. We set the reliability requirements for the two services and analyze their pair of sum rates. We show that, even with overlapping transmissions from multiple eMBB and URLLC users, the use of NOMA techniques allows us to guarantee the reliability requirements for both services.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
LoRa Performance Analysis with Superposed Signal Decoding
Authors:
J. M. de Souza Sant'Ana,
A. Hoeller,
R. D. Souza,
H. Alves,
S. Montejo-Sánchez
Abstract:
This paper considers the use of successive interference cancellation (SIC) to decode superposed signals in Long Range (LoRa) networks. We build over a known stochastic geometry model for LoRa networks and include the effect of recovering colliding packets through SIC. We derive closed-form expressions for the successful decoding of packets using SIC taking path loss, fading, noise, and interferenc…
▽ More
This paper considers the use of successive interference cancellation (SIC) to decode superposed signals in Long Range (LoRa) networks. We build over a known stochastic geometry model for LoRa networks and include the effect of recovering colliding packets through SIC. We derive closed-form expressions for the successful decoding of packets using SIC taking path loss, fading, noise, and interference into account, while we validate the model by means of Monte Carlo simulations. Results show that SIC-enabled LoRa networks improve worst-case reliability by up to 34%. We show that, for at least one test scenario, SIC increases by 159% the number of served users with the same worst-case reliability level.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
Performance Analysis of Single-Cell Adaptive Data Rate-Enabled LoRaWAN
Authors:
Arliones Hoeller,
Richard Demo Souza,
Samuel Montejo-Sánchez,
Hirley Alves
Abstract:
LoRaWAN enables massive connectivity for Internet-of-Things applications. Many published works employ stochastic geometry to derive outage models of LoRaWAN over fading channels assuming fixed transmit power and distance-based spreading factor (SF) allocation. However, in practice, LoRaWAN employs the Adaptive Data Rate (ADR) mechanism, which dynamically adjusts SF and transmit power of nodes base…
▽ More
LoRaWAN enables massive connectivity for Internet-of-Things applications. Many published works employ stochastic geometry to derive outage models of LoRaWAN over fading channels assuming fixed transmit power and distance-based spreading factor (SF) allocation. However, in practice, LoRaWAN employs the Adaptive Data Rate (ADR) mechanism, which dynamically adjusts SF and transmit power of nodes based on channel state. The community addressed the performance of ADR using simulations, but analytical models have not been introduced. In this letter, we seek to close this gap. We build over an analytical LoRaWAN model to consider the performance of steady-state ADR-enabled LoRaWAN. We derive outage expressions and an optimization procedure to maximize the number of users under reliability constraints. Results show that power allocation reduces interference and improves network capacity while reducing average power.
△ Less
Submitted 19 February, 2020;
originally announced February 2020.
-
Electricity Theft Detection with self-attention
Authors:
Paulo Finardi,
Israel Campiotti,
Gustavo Plensack,
Rafael Derradi de Souza,
Rodrigo Nogueira,
Gustavo Pinheiro,
Roberto Lotufo
Abstract:
In this work we propose a novel self-attention mechanism model to address electricity theft detection on an imbalanced realistic dataset that presents a daily electricity consumption provided by State Grid Corporation of China. Our key contribution is the introduction of a multi-head self-attention mechanism concatenated with dilated convolutions and unified by a convolution of kernel size $1$. Mo…
▽ More
In this work we propose a novel self-attention mechanism model to address electricity theft detection on an imbalanced realistic dataset that presents a daily electricity consumption provided by State Grid Corporation of China. Our key contribution is the introduction of a multi-head self-attention mechanism concatenated with dilated convolutions and unified by a convolution of kernel size $1$. Moreover, we introduce a binary input channel (Binary Mask) to identify the position of the missing values, allowing the network to learn how to deal with these values. Our model achieves an AUC of $0.926$ which is an improvement in more than $17\%$ with respect to previous baseline work. The code is available on GitHub at https://github.com/neuralmind-ai/electricity-theft-detection-with-self-attention.
△ Less
Submitted 14 February, 2020;
originally announced February 2020.
-
On CSI-free Multi-Antenna Schemes for Massive RF Wireless Energy Transfer
Authors:
Onel L. A. López,
Samuel Montejo-Sánchez,
Richard D. Souza,
Hirley Alves,
Constantinos B. Papadias
Abstract:
Wireless Energy Transfer (WET) is emerging as a potential green enabler for massive Internet of Things (IoT). Herein, we analyze Channel State Information (CSI)-free multi-antenna strategies for powering wirelessly a large set of single-antenna IoT devices. The CSI-free schemes are AA-SS (AA-IS), where all antennas transmit the same (independent) signal(s), and SA, where just one antenna transmits…
▽ More
Wireless Energy Transfer (WET) is emerging as a potential green enabler for massive Internet of Things (IoT). Herein, we analyze Channel State Information (CSI)-free multi-antenna strategies for powering wirelessly a large set of single-antenna IoT devices. The CSI-free schemes are AA-SS (AA-IS), where all antennas transmit the same (independent) signal(s), and SA, where just one antenna transmits at a time such that all antennas are utilized during the coherence block. We characterize the distribution of the provided energy under correlated Rician fading for each scheme and find out that while AA-IS and SA cannot take advantage of the multiple antennas to improve the average provided energy, its dispersion can be significantly reduced. Meanwhile, AA-SS provides the greatest average energy, but also the greatest energy dispersion, and the gains depend critically on the mean phase shifts between the antenna elements. We find that consecutive antennas must be $π$ phase-shifted for optimum average energy performance under AA-SS. Our numerical results evidenced that correlation is beneficial under AA-SS, while a greater line of sight (LOS) and/or number of antennas is not always beneficial under such scheme. Meanwhile, both AA-IS and SA schemes benefit from small correlation, large LOS and/or large number of antennas.
△ Less
Submitted 15 June, 2020; v1 submitted 6 February, 2020;
originally announced February 2020.
-
Hybrid Coded Replication in LoRa Networks
Authors:
Jean Michel de Souza Sant'Ana,
Arliones Hoeller,
Richard Demo Souza,
Samuel Montejo-Sánchez,
Hirley Alves,
Mario de Noronha Neto
Abstract:
Low Power Wide Area Networks (LPWAN) are wireless connectivity solutions for Internet-of-Things (IoT) applications, including industrial automation. Among the several LPWAN technologies, LoRaWAN has been extensively addressed by the research community and the industry. However, the reliability and scalability of LoRaWAN are still uncertain. One of the techniques to increase the reliability of LoRa…
▽ More
Low Power Wide Area Networks (LPWAN) are wireless connectivity solutions for Internet-of-Things (IoT) applications, including industrial automation. Among the several LPWAN technologies, LoRaWAN has been extensively addressed by the research community and the industry. However, the reliability and scalability of LoRaWAN are still uncertain. One of the techniques to increase the reliability of LoRaWAN is message replication, which exploits time diversity. This paper proposes a novel hybrid coded message replication scheme that interleaves simple repetition and a recently proposed coded replication method. We analyze the optimization of the proposed scheme under minimum reliability requirements and show that it enhances the network performance without requiring additional transmit power compared to the competing replication techniques.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Achieving Fair Random Access Performance in Massive MIMO Crowded Machine-Type Networks
Authors:
José Carlos Marinello,
Taufik Abrão,
Richard Demo Souza,
Elisabeth de Carvalho,
Petar Popovski
Abstract:
The use of massive multiple-input multiple-output (MIMO) to serve a crowd of user equipments (UEs) is challenged by the deficit of pilots. Assuming that the UEs are intermittently active, this problem can be addressed by a shared access to the pilots and a suitable random access (RA) protocol. The strongest-user collision resolution (SUCRe) is a previously proposed RA protocol that often privilege…
▽ More
The use of massive multiple-input multiple-output (MIMO) to serve a crowd of user equipments (UEs) is challenged by the deficit of pilots. Assuming that the UEs are intermittently active, this problem can be addressed by a shared access to the pilots and a suitable random access (RA) protocol. The strongest-user collision resolution (SUCRe) is a previously proposed RA protocol that often privileges the UEs closer to the base station (BS). In contrast, we propose a novel RA protocol using a decentralized pilot power allocation method that aims at a fairer performance. The proposed access class barring with power control (ACBPC) protocol allows each UE to estimate, without additional overhead, how many UEs collided for the chosen pilot and calculate an ACB factor, which is then used to determine the pilot retransmission probability in the next protocol step. The results show that the proposed ACBPC protocol is superior to SUCRe in terms of providing a fair connectivity for very crowded networks, although still being distributed and uncoordinated as the original SUCRe protocol.
△ Less
Submitted 11 January, 2020;
originally announced January 2020.
-
Massive Wireless Energy Transfer: Enabling Sustainable IoT Towards 6G Era
Authors:
Onel L. Alcaraz López,
Hirley Alves,
Richard Demo Souza,
Samuel Montejo-Sánchez,
Evelio M. García Fernández,
Matti Latva-aho
Abstract:
Recent advances on wireless energy transfer (WET) make it a promising solution for powering future Internet of Things (IoT) devices enabled by the upcoming sixth generation (6G) era. The main architectures, challenges and techniques for efficient and scalable wireless powering are overviewed in this paper. Candidates enablers such as energy beamforming (EB), distributed antenna systems (DAS), adva…
▽ More
Recent advances on wireless energy transfer (WET) make it a promising solution for powering future Internet of Things (IoT) devices enabled by the upcoming sixth generation (6G) era. The main architectures, challenges and techniques for efficient and scalable wireless powering are overviewed in this paper. Candidates enablers such as energy beamforming (EB), distributed antenna systems (DAS), advances on devices' hardware and programmable medium, new spectrum opportunities, resource scheduling and distributed ledger technology are outlined. Special emphasis is placed on discussing the suitability of channel state information (CSI)-limited/free strategies when powering simultaneously a massive number of devices. The benefits from combining DAS and EB, and from using average CSI whenever available, are numerically illustrated. The pros and cons of the state-of-the-art CSI-free WET techniques in ultra-low power setups are thoroughly revised, and some possible future enhancements are outlined. Finally, key research directions towards realizing WET-enabled massive IoT networks in the 6G era are identified and discussed in detail.
△ Less
Submitted 2 January, 2021; v1 submitted 11 December, 2019;
originally announced December 2019.
-
Rate Control for Wireless-Powered Communication Network with Reliability and Delay Constraints
Authors:
Onel L. Alcaraz López,
Hirley Alves,
Richard Demo Souza,
Samuel Montejo-Sánchez,
Evelio M. García Fernández
Abstract:
We consider a two-phase Wireless-Powered Communication Network under Nakagami-m fading, where a wireless energy transfer process first powers a sensor node that then uses such energy to transmit its data in the wireless information transmission phase. We explore a fixed transmit rate scheme designed to cope with the reliability and delay constraints of the system while attaining closed-form approx…
▽ More
We consider a two-phase Wireless-Powered Communication Network under Nakagami-m fading, where a wireless energy transfer process first powers a sensor node that then uses such energy to transmit its data in the wireless information transmission phase. We explore a fixed transmit rate scheme designed to cope with the reliability and delay constraints of the system while attaining closed-form approximations for the optimum wireless energy transfer and wireless information transmission blocklength. Then, a more-elaborate rate control strategy exploiting the readily available battery charge information is proposed and the results evidence its outstanding performance when compared with the fixed transmit rate, for which no battery charge information is available. It even reaches an average rate performance close to that of an ideal scheme requiring full Channel State Information at transmitter side. Numerical results show the positive impact of a greater number of antennas at the destination, and evidence that the greater the reliability constraints, the smaller the message sizes on average, and the smaller the optimum information blocklengths. Finally, we corroborate the appropriateness of using the asymptotic blocklength formulation as an approximation of the non-asymptotic finite blocklength results.
△ Less
Submitted 30 August, 2019;
originally announced September 2019.
-
An Integrodifferential Equation for Electromagnetic Fields in Linear Dispersive Media
Authors:
V. A. Coelho,
F. S. S. Rosa,
Reinaldo de Melo e Souza,
C. Farina,
M. V. Cougo-Pinto
Abstract:
We extend the usual derivation of the wave equation from Maxwell's equations in vacuum to the case of electromagnetic fields in dispersive homogeneous isotropic linear media. Usually, dispersive properties of materials are studied in Fourier space. However, it can be rewarding to consider these properties as causal functions of time. Due to temporal non locality, this procedure gives rise to an in…
▽ More
We extend the usual derivation of the wave equation from Maxwell's equations in vacuum to the case of electromagnetic fields in dispersive homogeneous isotropic linear media. Usually, dispersive properties of materials are studied in Fourier space. However, it can be rewarding to consider these properties as causal functions of time. Due to temporal non locality, this procedure gives rise to an integrodifferential equation for the electromagnetic fields, which we also call a wave equation. We have not found this equation in the literature and we show in this paper why it can be useful.
△ Less
Submitted 27 August, 2019;
originally announced August 2019.
-
Optimum LoRaWAN Configuration Under Wi-SUN Interference
Authors:
Arliones Hoeller-Jr.,
Richard Demo Souza,
Hirley Alves,
Onel L. Alcaraz López,
Samuel Montejo-Sánchez,
Marcelo Eduardo Pellenz
Abstract:
Smart Utility Networks (SUN) rely on the Wireless-SUN (Wi-SUN) specification for years. Recently practitioners and researchers have considered Low-Power Wide-Area Networks (LPWAN) like LoRaWAN for SUN applications. With distinct technologies deployed in the same area and sharing unlicensed bands, one can expect these networks to interfere with one another. This paper builds over a LoRaWAN model to…
▽ More
Smart Utility Networks (SUN) rely on the Wireless-SUN (Wi-SUN) specification for years. Recently practitioners and researchers have considered Low-Power Wide-Area Networks (LPWAN) like LoRaWAN for SUN applications. With distinct technologies deployed in the same area and sharing unlicensed bands, one can expect these networks to interfere with one another. This paper builds over a LoRaWAN model to optimize network parameters while accounting for inter-technology interference. Our analytic model accounts for the interference LoRaWAN receives from IEEE 802.15.4g networks, which forms the bottom layers of Wi-SUN systems. We derive closed-form equations for the expected reliability of LoRaWAN in such scenarios. We set the model parameters with data from real measurements of the interplay among the technologies. Finally, we propose two optimization algorithms to determine the best LoRaWAN configurations, given a targeted minimum reliability level. The algorithms maximize either communication range or the number of users given constraints on the minimum number of users, minimum communication range, and minimum reliability. We validate the models and algorithms through numerical analysis and simulations. The proposed methods are useful tools for planning interference-limited networks with requirements of minimum reliability.
△ Less
Submitted 11 December, 2019; v1 submitted 11 June, 2019;
originally announced June 2019.
-
In-Band Pilot Overhead in Ultra-Reliable Low Latency Decode and Forward Relaying
Authors:
Parisa Nouri,
Hirley Alves,
Richard Demo Souza,
Matti Latva-aho
Abstract:
In URLLC the performance of short message communications highly depends on the training sequence length due to the stringent latency and reliability requirements. In this paper, we study the performance of cooperative and non-cooperative transmissions under imperfect channel estimation and Rayleigh fading for URLLC. We assume a peak power constraint on pilot symbols in addition to the average powe…
▽ More
In URLLC the performance of short message communications highly depends on the training sequence length due to the stringent latency and reliability requirements. In this paper, we study the performance of cooperative and non-cooperative transmissions under imperfect channel estimation and Rayleigh fading for URLLC. We assume a peak power constraint on pilot symbols in addition to the average power constraint which is used for comparison purposes. We obtain the optimal training length as a function of blocklength and power constraint factor to meet the URLLC requirements. Moreover, the simulation results show the impact of pilot overhead on reliability, latency, and goodput of cooperative communications compared to pointto-point transmission
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Statistical Analysis of Multiple Antenna Strategies for Wireless Energy Transfer
Authors:
Onel L. Alcaraz López,
Hirley Alves,
Richard Demo Souza,
Samuel Montejo-Sánchez
Abstract:
Wireless Energy Transfer (WET) is emerging as a potential solution for powering small energy-efficient devices. We propose strategies that use multiple antennas at a power station, which wirelessly charges a large set of single-antenna devices. Proposed strategies operate without Channel State Information (CSI) and we attain the distribution and main statistics of the harvested energy under Rician…
▽ More
Wireless Energy Transfer (WET) is emerging as a potential solution for powering small energy-efficient devices. We propose strategies that use multiple antennas at a power station, which wirelessly charges a large set of single-antenna devices. Proposed strategies operate without Channel State Information (CSI) and we attain the distribution and main statistics of the harvested energy under Rician fading channels with sensitivity and saturation energy harvesting (EH) impairments. A switching antenna strategy, where a single antenna with full power transmits at a time, provides the most predictable energy source, and it is particularly suitable for powering sensor nodes with highly sensitive EH hardware operating under non-LOS (NLOS) conditions; while other WET schemes perform alike or better in terms of the average harvested energy. Under NLOS switching antennas is the best, while when LOS increases transmitting simultaneously with equal power in all antennas is the most beneficial. Moreover, spatial correlation is not beneficial unless the power station transmits simultaneously through all antennas, raising a trade-off between average and variance of the harvested energy since both metrics increase with the spatial correlation. Moreover, the performance gap between CSI-free and CSI-based strategies decreases quickly as the number of devices increases.
△ Less
Submitted 9 July, 2019; v1 submitted 26 November, 2018;
originally announced November 2018.
-
Testing a best-fit hydrodynamical model using PCA
Authors:
Tiago Nunes da Silva,
David Dobrigkeit Chinellato,
Rafael Derradi de Souza,
Mauricio Hippert,
Matthew Luzum,
Jorge Noronha,
Jun Takahashi
Abstract:
Recently, a comprehensive Bayesian analysis was performed to simultaneously extract the values of a number of hydrodynamic parameters necessary for compatibility with a limited set of experimental data from the LHC. In this work, this best-fit model is tested against newly measured experimental flow results not included in the original work, namely the principal components of the two-particle corr…
▽ More
Recently, a comprehensive Bayesian analysis was performed to simultaneously extract the values of a number of hydrodynamic parameters necessary for compatibility with a limited set of experimental data from the LHC. In this work, this best-fit model is tested against newly measured experimental flow results not included in the original work, namely the principal components of the two-particle correlation matrix in transverse momentum. The results from simulations show a good numerical agreement with data obtained by the CMS Collaboration.
△ Less
Submitted 12 November, 2018;
originally announced November 2018.
-
Stokes-anti-Stokes correlated photon properties akin to photonic Cooper pairs
Authors:
Filomeno S. de Aguiar Junior,
Andre Saraiva,
Marcelo F. Santos,
Belita Koiller,
Reinaldo de Melo e Souza,
Arthur Patrocinio Pena,
Raigna A. Silva,
Carlos H. Monken,
Ado Jorio
Abstract:
Photons interact with each other in condensed matter through the same mechanism that forms Cooper pairs in superconductors -- the exchange of virtual phonons [PRL 119, 193603 (2017)]. It is however unclear which consequences of this interaction will be observable and potentially lead to further analogy with superconductivity. We investigate the energy, momentum and production rate of correlate Sto…
▽ More
Photons interact with each other in condensed matter through the same mechanism that forms Cooper pairs in superconductors -- the exchange of virtual phonons [PRL 119, 193603 (2017)]. It is however unclear which consequences of this interaction will be observable and potentially lead to further analogy with superconductivity. We investigate the energy, momentum and production rate of correlate Stokes-anti-Stokes (SaS) photons in diamond and other transparent media, experiencing properties akin to those of electronic Cooper pairs. The rate of correlated SaS production depends on the energy shifts of the pair, which in the BCS theory determines whether there should be an attractive or repulsive interaction. With this view, we only observe correlated SaS in the case of attractive interactions. While traditional photon-phonon collisions scatter light in all directions, the correlated SaS photons follow the same path as the noninteracting laser. The observed correlated SaS photon pairs are rare, but our model indicates paths to achieve higher interaction energies.
△ Less
Submitted 13 March, 2019; v1 submitted 29 October, 2018;
originally announced October 2018.
-
Repulsive van der Waals interaction between a quantum particle and a conducting toroid
Authors:
P. P. Abrantes,
Yuri França,
Reinaldo de Melo e Souza,
F. S. S. da Rosa,
C. Farina
Abstract:
We calculate the non-retarded dispersion force exerted on an electrically polarizable quantum particle by a perfectly conducting toroid, which is one of the most common objects exhibiting a non-trivial topology. We employ a convenient method developed by Eberlein and Zietal that essentially relates the quantum problem of calculating dispersion forces between a quantum particle and a perfectly cond…
▽ More
We calculate the non-retarded dispersion force exerted on an electrically polarizable quantum particle by a perfectly conducting toroid, which is one of the most common objects exhibiting a non-trivial topology. We employ a convenient method developed by Eberlein and Zietal that essentially relates the quantum problem of calculating dispersion forces between a quantum particle and a perfectly conducting surface of arbitrary shape to a corresponding classical problem of electrostatics. Considering the quantum particle in the symmetry axis of the toroid, we use this method to find an exact analytical result for the van der Waals interaction between the quantum particle and the conducting toroid. Surprisingly, we show that for appropriate values of the two radii of the toroid the dispersive force on the quantum particle is repulsive. This is a remarkable result since repulsion in dispersive interactions involving only electric objects (and particles) in vacuum is rarely reported in the literature. Final comments are made about particular limiting cases as, for instance, the quantum particle-nanoring system.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.
-
Finite Blocklength Communications in Smart Grids for Dynamic Spectrum Access and Locally Licensed Scenarios
Authors:
Iran Ramezanipour,
Parisa Nouri,
Hirley Alves,
Pedro J. H. Nardelli,
Richard Demo Souza,
Ari Pouttu
Abstract:
This work focuses on the performance analysis of short blocklength communication with application in smart grids. We use stochastic geometry to compute in closed form the success probability of a typical message transmission as a function of its size (i.e. blocklength), the number of information bits and the density of interferers. Two different scenarios are investigated: (i) dynamic spectrum acc…
▽ More
This work focuses on the performance analysis of short blocklength communication with application in smart grids. We use stochastic geometry to compute in closed form the success probability of a typical message transmission as a function of its size (i.e. blocklength), the number of information bits and the density of interferers. Two different scenarios are investigated: (i) dynamic spectrum access where the licensed and unlicensed users, share the uplink channel frequency band and (ii) local licensing approach using the so called micro operator, which holds an exclusive license of its own. Approximated outage probability expression is derived for the dynamic spectrum access scenario, while a closed-form solution is attained for the micro-operator. The analysis also incorporates the use of retransmissions when messages are detected in error. Our numerical results show how reliability and delay are related in either scenarios.
△ Less
Submitted 24 May, 2018;
originally announced May 2018.
-
Microscopic dynamical Casimir effect
Authors:
Reinaldo de Melo e Souza,
François Impens,
Paulo A. Maia Neto
Abstract:
We consider an atom in its ground state undergoing a non-relativistic oscillation in free space. The interaction with the electromagnetic quantum vacuum leads to two effects to leading order in perturbation theory. When the mechanical frequency is larger than the atomic transition frequency, the dominant effect is the motion-induced transition to an excited state with the emission of a photon carr…
▽ More
We consider an atom in its ground state undergoing a non-relativistic oscillation in free space. The interaction with the electromagnetic quantum vacuum leads to two effects to leading order in perturbation theory. When the mechanical frequency is larger than the atomic transition frequency, the dominant effect is the motion-induced transition to an excited state with the emission of a photon carrying the excess energy. We compute the angular distribution of emitted photons and the excitation rate. On the other hand, when the mechanical frequency is smaller than the transition frequency, the leading-order effect is the parametric emission of photon pairs, which constitutes the microscopic counterpart of the dynamical Casimir effect. We discuss the properties of the microscopic dynamical Casimir effect and build a connection with the photon production by an oscillating macroscopic metallic mirror.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Hybrid Wired-Wireless Backhaul Solutions for Heterogeneous Ultra-Dense Networks
Authors:
Onel L. A. López,
Hirley Alves,
Richard Demo Souza,
Matti Latva-aho
Abstract:
Wireless networks are becoming extremely pervasive while traffic demand is ever increasing. In order to cope with the forecast increase in traffic volume for the upcoming years, as well as the number of connected devices, new technologies, practices and spectrum rearrangements are required. In this context, a key question arises: how to provide extensive backhaul connectivity and capacity for perv…
▽ More
Wireless networks are becoming extremely pervasive while traffic demand is ever increasing. In order to cope with the forecast increase in traffic volume for the upcoming years, as well as the number of connected devices, new technologies, practices and spectrum rearrangements are required. In this context, a key question arises: how to provide extensive backhaul connectivity and capacity for pervasive ultra dense networks? The answer is rather complex, if feasible. To shed some light into this issue we overview potential technologies, either wired or wireless, and identify technical challenges. Moreover, we evaluate an illustrative scenario of a ultra-dense network that operates with hybrid wired-wireless backhaul. We assume multiple radio access technologies at small and macro base stations (BSs), and we discuss optimal traffic splitting and routing solutions for different topologies and traffic profiles.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Ultra-Reliable Short Message Cooperative Relaying Protocols under Nakagami-m Fading
Authors:
Parisa Nouri,
Hirley Alves,
Richard Demo Souza,
Matti Latva-aho
Abstract:
In the next few years, the development of wireless communication systems propel the world into a fully connected society where the Machine-type Communications (MTC) plays a substantial role as key enabler in the future cellular systems. MTC is categorized into mMTC and uMTC, where mMTC provides the connectivity to massive number of devices while uMTC is related to low latency and ultra-high reliab…
▽ More
In the next few years, the development of wireless communication systems propel the world into a fully connected society where the Machine-type Communications (MTC) plays a substantial role as key enabler in the future cellular systems. MTC is categorized into mMTC and uMTC, where mMTC provides the connectivity to massive number of devices while uMTC is related to low latency and ultra-high reliability of the wireless communications. This paper studies uMTC with incremental relaying technique, where the source and relay collaborate to transfer the message to a destination. In this paper, we compare the performance of two distinct cooperative relaying protocols with the direct transmission under the finite blocklength (FB) regime. We define the overall outage probability in each relaying scenario, supposing Nakagami-m fading. We show that cooperative communication outperforms direct transmission under the FB regime. In addition, we examine the impact of fading severity and power allocation factor on the outage probability and the minimum delay required to meet the ultra-reliable communication requirements. Moreover, we provide the outage probability in closed form.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
Ultra-Reliable Cooperative Short-Packet Communications with Wireless Energy Transfer
Authors:
Onel L. A. López,
Evelio M. G. Fernández,
Richard D. Souza,
Hirley Alves
Abstract:
We analyze a cooperative wireless communication system with finite block length and finite battery energy, under quasi-static Rayleigh fading. Source and relay nodes are powered by a wireless energy transfer (WET) process, while using the harvested energy to feed their circuits, send pilot signals to estimate channels at receivers, and for wireless information transmission (WIT). Other power consu…
▽ More
We analyze a cooperative wireless communication system with finite block length and finite battery energy, under quasi-static Rayleigh fading. Source and relay nodes are powered by a wireless energy transfer (WET) process, while using the harvested energy to feed their circuits, send pilot signals to estimate channels at receivers, and for wireless information transmission (WIT). Other power consumption sources beyond data transmission power are considered. The error probability is investigated under perfect/imperfect channel state information (CSI), while reaching accurate closed-form approximations in ideal direct communication system setups. We consider ultra-reliable communication (URC) scenarios under discussion for the next fifth-generation (5G) of wireless systems. The numerical results show the existence of an optimum pilot transmit power for channel estimation, which increases with the harvested energy. We also show the importance of cooperation, even taking into account the multiplexing loss, in order to meet the error and latency constraints of the URC systems.
△ Less
Submitted 1 January, 2018;
originally announced January 2018.
-
Photonic Counterparts of Cooper Pairs
Authors:
Andre Saraiva,
Filomeno S. de Aguiar Junior,
Reinaldo de Melo e Souza,
Arthur Patrocinio Pena,
Carlos H. Monken,
Marcelo F. Santos,
Belita Koiller,
Ado Jorio
Abstract:
The microscopic theory of superconductivity raised the disruptive idea that electrons couple through the elusive exchange of virtual phonons, overcoming the strong Coulomb repulsion to form Cooper pairs. Light is also known to interact with atomic vibrations, as for example in the Raman effect. We show that photon pairs exchange virtual vibrations in transparent media, leading to an effective phot…
▽ More
The microscopic theory of superconductivity raised the disruptive idea that electrons couple through the elusive exchange of virtual phonons, overcoming the strong Coulomb repulsion to form Cooper pairs. Light is also known to interact with atomic vibrations, as for example in the Raman effect. We show that photon pairs exchange virtual vibrations in transparent media, leading to an effective photon-photon interaction identical to that for electrons in BCS theory of supercondutivity, in spite of the fact that photons are bosons. In this scenario, photons may exchange energy without matching a quantum of vibration of the medium. As a result, pair correlations for photons scattered away from the Raman resonances are expected to be enhanced. Experimental demonstration of this effect is provided here by time correlated Raman measurements in different media. The experimental data confirm our theoretical interpretation of a photonic Cooper pairing, without the need for any fitting parameters.
△ Less
Submitted 18 October, 2017; v1 submitted 13 September, 2017;
originally announced September 2017.