-
Status of the IOTA Proton Injector
Authors:
D. Edstrom Jr.,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
J. -P. Carneiro,
H. Piekarz,
A. Shemyakin,
A. Valishev
Abstract:
The IOTA Proton Injector (IPI), currently under installation at the Fermilab Accelerator Science and Technology facility (FAST), is a machine capable of delivering 20 mA pulses of protons at 2.5 MeV to the Integrable Optics Test Accelerator (IOTA) ring. First beam in the IPI beamline is anticipated in the first half of 2024, when it will operate alongside the existing electron injector beamline to…
▽ More
The IOTA Proton Injector (IPI), currently under installation at the Fermilab Accelerator Science and Technology facility (FAST), is a machine capable of delivering 20 mA pulses of protons at 2.5 MeV to the Integrable Optics Test Accelerator (IOTA) ring. First beam in the IPI beamline is anticipated in the first half of 2024, when it will operate alongside the existing electron injector beamline to facilitate further beam physics research and continued development of novel accelerator technologies at the IOTA ring. This report details the expected operational profile, known challenges, and the current state of installation.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
HELEN: Traveling Wave SRF Linear Collider Higgs Factory
Authors:
S. Belomestnykh,
P. C. Bhat,
A. Grassellino,
S. Kazakov,
H. Padamsee,
S. Posen,
A. Romanenko,
V. Shiltsev,
A. Valishev,
V. Yakovlev
Abstract:
Traveling wave SRF accelerating structures offer several advantages over the traditional standing wave structures: substantially lower $H_pk/E_acc$ and lower $E_pk/E_acc$, ratios of peak magnetic field and peak electric field to the accelerating gradient, respectively, together with substantially higher $R/Q$. In this paper we discuss how a linear collider Higgs Factory HELEN can be built using TW…
▽ More
Traveling wave SRF accelerating structures offer several advantages over the traditional standing wave structures: substantially lower $H_pk/E_acc$ and lower $E_pk/E_acc$, ratios of peak magnetic field and peak electric field to the accelerating gradient, respectively, together with substantially higher $R/Q$. In this paper we discuss how a linear collider Higgs Factory HELEN can be built using TW-based SRF linacs. We cover a plan to address technological challenges and describe ways to upgrade the collider luminosity and energy.
△ Less
Submitted 12 July, 2023;
originally announced July 2023.
-
Improved Measurements of Nonlinear Integrable Optics Invariants at IOTA
Authors:
J. N. Wieland,
A. L. Romanov,
A. Valishev,
G. Stancari,
J. D. Jarvis,
N. Kuklev,
S. Szustkowski,
S. Nagaitsev
Abstract:
Nonlinear integrable optics (NIO) are a promising novel approach at improving the stability of high intensity beams. Implementations of NIO based on specialized magnetic elements are being tested at the Integrable Optics Test Accelerator (IOTA) at Fermilab. One method of verifying proper implementation of these solutions is by measuring the analytic invariants predicted by theory. The initial meas…
▽ More
Nonlinear integrable optics (NIO) are a promising novel approach at improving the stability of high intensity beams. Implementations of NIO based on specialized magnetic elements are being tested at the Integrable Optics Test Accelerator (IOTA) at Fermilab. One method of verifying proper implementation of these solutions is by measuring the analytic invariants predicted by theory. The initial measurements of nonlinear invariants were performed during IOTA run in 2019/20, however the covid-19 pandemic prevented the full-scale experimental program from being completed. Several important improvements were implemented in IOTA for the 2022/23 run, including the operation at higher beam energy of 150 MeV, improved optics control, and chromaticity correction. This report presents the results of improved measurements of nonlinear invariants.
△ Less
Submitted 23 May, 2023;
originally announced May 2023.
-
IOTA Proton Injector Beamline Installation
Authors:
D. Edstrom Jr,
D. Broemmelsiek,
K. Carlson,
J. -P. Carneiro,
H. Piekarz,
A. Romanov,
A. Shemyakin,
A. Valishev
Abstract:
The IOTA Proton Injector (IPI), currently under installation at the Fermilab Accelerator Science and Technology facility, is a beamline capable of delivering 20-mA pulses of protons at 2.5 MeV to the Integrable Optics Test Accelerator (IOTA) ring. First beam in the IPI beamline is anticipated in 2023, when it will operate alongside the existing electron injector beamline to facilitate further fund…
▽ More
The IOTA Proton Injector (IPI), currently under installation at the Fermilab Accelerator Science and Technology facility, is a beamline capable of delivering 20-mA pulses of protons at 2.5 MeV to the Integrable Optics Test Accelerator (IOTA) ring. First beam in the IPI beamline is anticipated in 2023, when it will operate alongside the existing electron injector beamline to facilitate further fundamental physics research and continued development of novel accelerator technologies in the IOTA ring. This report details the expected operational profile, known challenges, and the current state of installation.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Snowmass'21 Accelerator Frontier Report
Authors:
S. Gourlay,
T. Raubenheimer,
V. Shiltsev,
G. Arduini,
R. Assmann,
C. Barbier,
M. Bai,
S. Belomestnykh,
S. Bermudez,
P. Bhat,
A. Faus-Golfe,
J. Galambos,
C. Geddes,
G. Hoffstaetter,
M. Hogan,
Z. Huang,
M. Lamont,
D. Li,
S. Lund,
R. Milner,
P. Musumeci,
E. Nanni,
M. Palmer,
N. Pastrone,
F. Pellemoine
, et al. (13 additional authors not shown)
Abstract:
In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these…
▽ More
In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these activities are summarized in this Accelerator Frontier report.
△ Less
Submitted 17 November, 2022; v1 submitted 28 September, 2022;
originally announced September 2022.
-
HELEN: A Linear Collider Based On Advanced SRF Technology
Authors:
S. Belomestnykh,
P. C. Bhat,
M. Checchin,
A. Grassellino,
M. Martinello,
S. Nagaitsev,
H. Padamsee,
S. Posen,
A. Romanenko,
V. Shiltsev,
A. Valishev,
V. Yakovlev
Abstract:
This paper discusses recently proposed Higgs Energy LEptoN (HELEN) $e+e-$ linear collider based on advances in superconducting radio frequency technology. The collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab with an interaction region within the site boundaries. After the initial physics run at 250 GeV, the collider could be upgrade…
▽ More
This paper discusses recently proposed Higgs Energy LEptoN (HELEN) $e+e-$ linear collider based on advances in superconducting radio frequency technology. The collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab with an interaction region within the site boundaries. After the initial physics run at 250 GeV, the collider could be upgraded either to higher luminosity or to higher (up to 500 GeV) energies.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Characterization of Octuopole Elements for IOTA
Authors:
J. N. Wieland,
J. D. Jarvis,
A. L. Romanov,
A. Valishev
Abstract:
The Integrable Optics Test Accelerator (IOTA) is a research storage ring constructed and operated at Fermilab to demonstrate the advantages of nonlinear integrable lattices. One of the nonlinear lattice configurations with one integral of motion is based on a string of short octupoles. The results of the individual magnets characterizations, which were necessary to determine their multipole compos…
▽ More
The Integrable Optics Test Accelerator (IOTA) is a research storage ring constructed and operated at Fermilab to demonstrate the advantages of nonlinear integrable lattices. One of the nonlinear lattice configurations with one integral of motion is based on a string of short octupoles. The results of the individual magnets characterizations, which were necessary to determine their multipole composition and magnetic centers, are presented. This information was used to select and align the best subset of octupoles for the IOTA run 4.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
U.S. National Accelerator R\&D Program on Future Colliders
Authors:
P. C. Bhat,
S. Belomestnykh,
A. Bross,
S. Dasu,
D. Denisov,
S. Gourlay,
S. Jindariani,
A. J. Lankford,
S. Nagaitsev,
E. A. Nanni,
M. A. Palmer,
T. Raubenheimer,
V. Shiltsev,
A. Valishev,
C. Vernieri,
F. Zimmermann
Abstract:
Future colliders are an essential component of a strategic vision for particle physics. Conceptual studies and technical developments for several exciting future collider options are underway internationally. In order to realize a future collider, a concerted accelerator R\&D program is required. The U.S. HEP accelerator R\&D program currently has no direct effort in collider-specific R\&D area. T…
▽ More
Future colliders are an essential component of a strategic vision for particle physics. Conceptual studies and technical developments for several exciting future collider options are underway internationally. In order to realize a future collider, a concerted accelerator R\&D program is required. The U.S. HEP accelerator R\&D program currently has no direct effort in collider-specific R\&D area. This shortcoming greatly compromises the U.S. leadership role in accelerator and particle physics. In this white paper, we propose a new national accelerator R\&D program on future colliders and outline the important characteristics of such a program.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
Experimental demonstration of OSC at IOTA: IOTA Run #3 Report
Authors:
J. Jarvis,
V. Lebedev,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
S. Chattopadhyay,
A. Dick,
D. Edstrom,
I. Lobach,
S. Nagaitsev,
H. Piekarz,
P. Piot,
J. Ruan,
J. Santucci,
G. Stancari,
A. Valishev
Abstract:
Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude [1-3]. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical ampl…
▽ More
Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude [1-3]. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical amplifiers. A number of variations on the original OSC concept have been proposed, and while a variety of proof-of-principle demonstrations and operational uses have been considered, the concept was not experimentally demonstrated up to now [4-9]. An OSC R&D program has been underway at IOTA for the past several years [4]. Run #3 of the IOTA ring, which began in Nov. 2020 and concluded in Aug. 2021, was focused on the worlds first experimental demonstration of OSC. The experimental program was successful in demonstrating and characterizing the OSC physics with the major outcomes including strong cooling in one, two and three dimensions, validation of the theoretical models of OSC and the demonstration of OSC with a single electron. This report briefly describes the activities and major milestones of the OSC program during Run #3. Detailed descriptions of the OSC theory, conceptual design and hardware elements can be found in reference [4].
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
Beam Test Facilities for R&D in Accelerator Science and Technologies
Authors:
John Power,
Christine Clarke,
Michael Downer,
Eric Esarey,
Cameron Geddes,
Mark J. Hogan,
Georg Heinz Hoffstaetter,
Chunguang Jing,
Sergei Nagaitsev,
Mark Palmer,
Philippe Piot,
Carl Schroeder,
Donald Umstadter,
Navid Vafaei-Najafabadi,
Alexander Valishev,
Louise Willingale,
Vitaly Yakimenko
Abstract:
This is the Snowmass Whitepaper on Beam Test Facilities for R&D in Accelerator Science and Technologies and it is submitted to two topical groups in the Accelerator Frontier: AF1 and AF6.
This is the Snowmass Whitepaper on Beam Test Facilities for R&D in Accelerator Science and Technologies and it is submitted to two topical groups in the Accelerator Frontier: AF1 and AF6.
△ Less
Submitted 21 March, 2022;
originally announced March 2022.
-
First Experimental Demonstration of Optical Stochastic Cooling
Authors:
J. Jarvis,
V. Lebedev,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
S. Chattopadhyay,
A. Dick,
D. Edstrom,
I. Lobach,
S. Nagaitsev,
H. Piekarz,
P. Piot,
J. Ruan,
J. Santucci,
G. Stancari,
A. Valishev
Abstract:
Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success1. Beam cooling reduces the spread in particle positions and momenta, while keeping the number of particles constant, and combats diffusive effects, thereby enabling particle accumulation and the prod…
▽ More
Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success1. Beam cooling reduces the spread in particle positions and momenta, while keeping the number of particles constant, and combats diffusive effects, thereby enabling particle accumulation and the production and preservation of intense beams. In the case of particle colliders, cooling increases the likelihood of observing rare physics events. One of the most important conceptual and technological advances in this area was stochastic cooling (SC), which was instrumental in the discovery of the W and Z bosons at CERN and the top quark at Fermilab2-6. SC reduces the random motion of the beam particles through granular sampling and correction of the beams phase-space structure, thus bearing resemblance to a Maxwells demon. The extension of SC from the microwave regime up to optical frequencies and bandwidths has long been pursued as it could increase the achievable cooling rates by three to four orders of magnitude and provide a powerful new tool for future accelerators. First proposed nearly thirty years ago, Optical Stochastic Cooling (OSC) replaces the conventional microwave elements of SC with optical-frequency analogs and is, in principle, compatible with any species of charged-particle beam7,8. Here we describe the first experimental demonstration of OSC in a proof-of-principle experiment9 at the Fermi National Accelerator Laboratorys Integrable Optics Test Accelerator10.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Versatile Multi-MW Proton Facility with Synchrotron Upgrade of Fermilab Proton Complex
Authors:
J. Eldred,
R. Ainsworth,
Y. Alexahin,
C. Bhat,
S. Chattopadhyay,
P. Derwent,
D. Johnson,
C. Johnstone,
J. Johnstone,
I. Kourbanis,
V. Lebedev,
S. Nagaitsev,
W. Pellico,
E. Pozdeyev,
V. Shiltsev,
M. Syphers,
C. Y. Tan,
A. Valishev,
R. Zwaska
Abstract:
DUNE/LBNF constitutes an international multi-decadal physics program for leading-edge neutrino science and proton decay studies [1] and is expected to serve as the flagship particle experiment based at Fermilab.
DUNE/LBNF constitutes an international multi-decadal physics program for leading-edge neutrino science and proton decay studies [1] and is expected to serve as the flagship particle experiment based at Fermilab.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Design Considerations for Fermilab Multi-MW Proton Facility in the DUNE/LBNF era
Authors:
Jeffrey Eldred,
Sergei Nagaitsev,
Vladimir Shiltsev,
Alexander Valishev,
Robert Zwaska,
Michael Syphers
Abstract:
Fermilab has submitted two Snowmass whitepapers on a future 2.4~MW upgrade for DUNE/LBNF featuring a 2 GeV extension of the PIP-II linac and the construction of a new rapid-cycling-synchrotron. This paper summarizes the relationship between these two scenarios, emphasizing the commonalities and tracing the differences to their original design questions. In addition to a high-level summary of the t…
▽ More
Fermilab has submitted two Snowmass whitepapers on a future 2.4~MW upgrade for DUNE/LBNF featuring a 2 GeV extension of the PIP-II linac and the construction of a new rapid-cycling-synchrotron. This paper summarizes the relationship between these two scenarios, emphasizing the commonalities and tracing the differences to their original design questions. In addition to a high-level summary of the two 2.4~MW upgrade scenarios, there is a brief discussion of staging, beamline capabilities, subsequent upgrades, and relevant R\&D. We are proposing a vigorous program to address various challenges associated with each scenario and to down-select the concept, most suitable to provide proton beams for years to come.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Higgs-Energy LEptoN (HELEN) Collider based on advanced superconducting radio frequency technology
Authors:
S. Belomestnykh,
P. C. Bhat,
A. Grassellino,
M. Checchin,
D. Denisov,
R. L. Geng,
S. Jindariani,
M. Liepe,
M. Martinello,
P. Merkel,
S. Nagaitsev,
H. Padamsee,
S. Posen,
R. A. Rimmer,
A. Romanenko,
V. Shiltsev,
A. Valishev,
V. Yakovlev
Abstract:
This Snowmass 2021 contributed paper discusses a Higgs-Energy LEptoN (HELEN) $e^+e^-$ linear collider based on advances superconducting radio frequency technology. The proposed collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab with an Interaction Region within the site boundaries. After the initial physics run at 250 GeV, the collide…
▽ More
This Snowmass 2021 contributed paper discusses a Higgs-Energy LEptoN (HELEN) $e^+e^-$ linear collider based on advances superconducting radio frequency technology. The proposed collider offers cost and AC power savings, smaller footprint (relative to the ILC), and could be built at Fermilab with an Interaction Region within the site boundaries. After the initial physics run at 250 GeV, the collider could be upgraded either to higher luminosity or to higher (up to 500 GeV) energies. If the ILC could not be realized in Japan in a timely fashion, the HELEN collider would be a viable option to build a Higgs factory in the U.S.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Accelerator and Beam Physics: Grand Challenges and Research Opportunities
Authors:
S. Nagaitsev,
V. Shiltsev,
A. Valishev,
T. Zolkin,
J. -L. Vay,
M. Bai,
Y. Cai,
M. J. Hogan,
Z. Huang,
J. Seeman,
B. Dunham,
X. Huang,
T. Roser,
M. Minty,
J. Rosenzweig,
P. Piot,
J. Power,
J. M. Byrd,
A. Seryi,
S. Lund,
J. R. Patterson
Abstract:
Accelerator and beam physics (ABP) is the science of the motion, generation, acceleration, manipulation, prediction, observation and use of charged particle beams. It focuses on fundamental long-term accelerator and beam physics research and development. Accelerator and beam physics research has resulted in important advances in accelerator science, yet support for this research is declining. NSF…
▽ More
Accelerator and beam physics (ABP) is the science of the motion, generation, acceleration, manipulation, prediction, observation and use of charged particle beams. It focuses on fundamental long-term accelerator and beam physics research and development. Accelerator and beam physics research has resulted in important advances in accelerator science, yet support for this research is declining. NSF has terminated its program in accelerator Science and funding by DOE through GARD and Accelerator Stewardship has been steady or declining. The declining support for accelerator research will slow advances and threaten student training and work-force development in accelerator science. We propose a robust and scientifically challenging program in accelerator and beam physics, which will position the field of US High Energy Physics to be productive and competitive for decades to come.
△ Less
Submitted 13 March, 2022;
originally announced March 2022.
-
Ion Coulomb Crystals in Storage Rings for Quantum Information Science
Authors:
S. Brooks,
K. Brown,
F. Méot,
A. Nomerotski,
S. Peggs,
M. Palmer,
T. Roser,
T. Shaftan,
G. H. Hoffstaetter,
S. Nagaitsev,
J. Lykken,
J. Jarvis,
V. Lebedev,
G. Stancari,
A. Valishev,
A. Taylor,
A. Hurd,
N. Moody,
P. Muggli,
A. Aslam,
S. G. Biedron,
T. Bolin,
S. Sosa Guitron,
C. Gonzalez-Zacarias,
M. Larsson
, et al. (7 additional authors not shown)
Abstract:
Quantum information science is a growing field that promises to take computing into a new age of higher performance and larger scale computing as well as being capable of solving problems classical computers are incapable of solving. The outstanding issue in practical quantum computing today is scaling up the system while maintaining interconnectivity of the qubits and low error rates in qubit ope…
▽ More
Quantum information science is a growing field that promises to take computing into a new age of higher performance and larger scale computing as well as being capable of solving problems classical computers are incapable of solving. The outstanding issue in practical quantum computing today is scaling up the system while maintaining interconnectivity of the qubits and low error rates in qubit operations to be able to implement error correction and fault-tolerant operations. Trapped ion qubits offer long coherence times that allow error correction. However, error correction algorithms require large numbers of qubits to work properly. We can potentially create many thousands (or more) of qubits with long coherence states in a storage ring. For example, a circular radio-frequency quadrupole, which acts as a large circular ion trap and could enable larger scale quantum computing. Such a Storage Ring Quantum Computer (SRQC) would be a scalable and fault tolerant quantum information system, composed of qubits with very long coherence lifetimes. With computing demands potentially outpacing the supply of high-performance systems, quantum computing could bring innovation and scientific advances to particle physics and other DOE supported programs. Increased support of R$\&$D in large scale ion trap quantum computers would allow the timely exploration of this exciting new scalable quantum computer. The R$\&$D program could start immediately at existing facilities and would include the design and construction of a prototype SRQC. We invite feedback from and collaboration with the particle physics and quantum information science communities.
△ Less
Submitted 15 March, 2022; v1 submitted 13 March, 2022;
originally announced March 2022.
-
An Upgrade Path for the Fermilab Accelerator Complex
Authors:
R. Ainsworth,
J. Dey,
J. Eldred,
R. Harnik,
J. Jarvis,
D. E. Johnson,
I. Kourbanis,
D. Neuffer,
E. Pozdeyev,
M. J. Syphers,
A. Valishev,
V. P. Yakovlev,
R. Zwaska
Abstract:
The completion of the PIP-II project and its superconducting linear accelerator will provide up to 1.2 MW of beam power to the LBNF/DUNE facility for neutrino physics. It will also be able to produce high-power beams directly from the linac that can be used for lower-energy particle physics experiments as well, such as directing beam toward the Muon Campus at Fermilab for example. Any further sign…
▽ More
The completion of the PIP-II project and its superconducting linear accelerator will provide up to 1.2 MW of beam power to the LBNF/DUNE facility for neutrino physics. It will also be able to produce high-power beams directly from the linac that can be used for lower-energy particle physics experiments as well, such as directing beam toward the Muon Campus at Fermilab for example. Any further significant upgrade of the beam power to DUNE, however, will be impeded by the limitations of the present Booster synchrotron at the facility. To increase the power to DUNE by a factor of two would require a new accelerator arrangement to feed the Main Injector that does not include the Booster. In what follows, a path toward upgrading the Fermilab accelerator complex to bring the beam power for DUNE to 2.4 MW is presented, using a new rapid-cycling synchrotron plus an energy upgrade to the PIP-II linac. The path includes the ability to instigate a new lower-energy, very high-power beam delivery system for experiments that can address much of the science program presented by the Booster Replacement Science Working Group. It also allows for the future possibility to go beyond 2.4 MW up to roughly 4 MW from the Main Injector.
△ Less
Submitted 11 March, 2022; v1 submitted 3 June, 2021;
originally announced June 2021.
-
Accelerator and Beam Physics Research Goals and Opportunities
Authors:
S. Nagaitsev,
Z. Huang,
J. Power,
J. -L. Vay,
P. Piot,
L. Spentzouris,
J. Rosenzweig,
Y. Cai,
S. Cousineau,
M. Conde,
M. Hogan,
A. Valishev,
M. Minty,
T. Zolkin,
X. Huang,
V. Shiltsev,
J. Seeman,
J. Byrd,
Y. Hao,
B. Dunham,
B. Carlsten,
A. Seryi,
R. Patterson
Abstract:
This report is a summary of two preparatory workshops, documenting the community vision for the national accelerator and beam physics research program. It identifies the Grand Challenges of accelerator and beam physics (ABP) field and documents research opportunities to address these Grand Challenges. This report will be used to develop a strategic research roadmap for the field of accelerator sci…
▽ More
This report is a summary of two preparatory workshops, documenting the community vision for the national accelerator and beam physics research program. It identifies the Grand Challenges of accelerator and beam physics (ABP) field and documents research opportunities to address these Grand Challenges. This report will be used to develop a strategic research roadmap for the field of accelerator science.
△ Less
Submitted 25 January, 2021; v1 submitted 11 January, 2021;
originally announced January 2021.
-
Experimental 3-dimensional tracking of the dynamics of a single electron in the Fermilab Integrable Optics Test Accelerator (IOTA)
Authors:
Aleksandr Romanov,
James Santucci,
Giulio Stancari,
Alexander Valishev,
Nikita Kuklev
Abstract:
We present the results of experimental studies on the transverse and longitudinal dynamics of a single electron in the IOTA storage ring. IOTA is a flexible machine dedicated to beam physics experiments with electrons and protons. A method was developed to reliably inject and circulate a controlled number of electrons in the ring. A key beam diagnostic system is the set of sensitive high-resolutio…
▽ More
We present the results of experimental studies on the transverse and longitudinal dynamics of a single electron in the IOTA storage ring. IOTA is a flexible machine dedicated to beam physics experiments with electrons and protons. A method was developed to reliably inject and circulate a controlled number of electrons in the ring. A key beam diagnostic system is the set of sensitive high-resolution digital cameras for the detection of synchrotron light emitted by the electrons. With 60-130 electrons in the machine, we measured beam lifetime and derived an absolute calibration of the optical system. At exposure times of 0.5 s, the cameras were sensitive to individual electrons. Camera images were used to reconstruct the time evolution of oscillation amplitudes of a single electron in all 3 degrees of freedom. The evolution of amplitudes directly showed the interplay between synchrotron-radiation damping, quantum excitations, and scattering with the residual gas. From the distribution of measured single-electron oscillation amplitudes, we deduced transverse emittances, momentum spread, damping times, and beam energy. Estimates of residual-gas density and composition were calculated from the measured distributions of vertical scattering angles. Combining scattering and lifetime data, we also provide an estimate of the aperture of the ring. To our knowledge, this is the first time that the dynamics of a single electron are tracked in all three dimensions with digital cameras in a storage ring.
△ Less
Submitted 1 October, 2021; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Measurements of undulator radiation power noise and comparison with $\textit{ab initio}$ calculations
Authors:
Ihar Lobach,
Sergei Nagaitsev,
Valeri Lebedev,
Aleksandr Romanov,
Giulio Stancari,
Alexander Valishev,
Aliaksei Halavanau,
Zhirong Huang,
Kwang-Je Kim
Abstract:
Generally, turn-to-turn fluctuations of synchrotron radiation power in a storage ring depend on the 6D phase-space distribution of the electron bunch. This effect is related to the interference of fields radiated by different electrons. Changes in the relative electron positions and velocities inside the bunch result in fluctuations in the total emitted energy per pass in a synchrotron radiation s…
▽ More
Generally, turn-to-turn fluctuations of synchrotron radiation power in a storage ring depend on the 6D phase-space distribution of the electron bunch. This effect is related to the interference of fields radiated by different electrons. Changes in the relative electron positions and velocities inside the bunch result in fluctuations in the total emitted energy per pass in a synchrotron radiation source. This effect has been previously described assuming constant and equal electron velocities before entering the synchrotron radiation source. In this paper, we present a generalized formula for the fluctuations with a non-negligible beam divergence. Further, we corroborate this formula in a dedicated experiment with undulator radiation in the Integrable Optics Test Accelerator (IOTA) storage ring at Fermilab. Lastly, possible applications in beam instrumentation are discussed.
△ Less
Submitted 25 February, 2021; v1 submitted 1 December, 2020;
originally announced December 2020.
-
Transverse beam emittance measurement by undulator radiation power noise
Authors:
Ihar Lobach,
Sergei Nagaitsev,
Valeri Lebedev,
Aleksandr Romanov,
Giulio Stancari,
Alexander Valishev,
Aliaksei Halavanau,
Zhirong Huang,
Kwang-Je Kim
Abstract:
Generally, turn-to-turn power fluctuations of incoherent spontaneous synchrotron radiation in a storage ring depend on the 6D phase-space distribution of the electron bunch. In some cases, if only one parameter of the distribution is unknown, this parameter can be determined from the measured magnitude of these power fluctuations. In this Letter, we report an absolute measurement (no free paramete…
▽ More
Generally, turn-to-turn power fluctuations of incoherent spontaneous synchrotron radiation in a storage ring depend on the 6D phase-space distribution of the electron bunch. In some cases, if only one parameter of the distribution is unknown, this parameter can be determined from the measured magnitude of these power fluctuations. In this Letter, we report an absolute measurement (no free parameters or calibration) of a small vertical emittance (5--15 nm rms) of a flat beam by this method, under conditions, when it is unresolvable by a conventional synchrotron light beam size monitor.
△ Less
Submitted 25 February, 2021; v1 submitted 1 December, 2020;
originally announced December 2020.
-
Statistical properties of undulator radiation in the IOTA storage ring
Authors:
Ihar Lobach,
Valeri Lebedev,
Sergei Nagaitsev,
Aleksandr Romanov,
Giulio Stancari,
Alexander Valishev,
Aliaksei Halavanau,
Zhirong Huang,
Kwang-Je Kim
Abstract:
We study turn-by-turn fluctuations in the number of spontaneously emitted photons from an undulator, installed in the Integrable Optics Test Accelerator (IOTA) electron storage ring at Fermilab. A theoretical model is presented, showing the relative contributions due to the discrete nature of light emission and to the incoherent sum of fields from different electrons in the bunch. The model is com…
▽ More
We study turn-by-turn fluctuations in the number of spontaneously emitted photons from an undulator, installed in the Integrable Optics Test Accelerator (IOTA) electron storage ring at Fermilab. A theoretical model is presented, showing the relative contributions due to the discrete nature of light emission and to the incoherent sum of fields from different electrons in the bunch. The model is compared with a previous experiment at Brookhaven and with new experiments we carried out at IOTA. Our experiments focused on the case of a large number of longitudinal and transverse radiation modes, a regime where photon shot noise is significant and the total magnitude of the fluctuations is very small. The experimental and data analysis techniques, required to reach the desired sensitivity, are detailed. We discuss how the model and the experiment provide insights into this emission regime, enable diagnostics of small beam sizes, and improve our understanding of beam lifetime in IOTA.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
Rapid-Cycling Synchrotron for Multi-Megawatt Proton Facility at Fermilab
Authors:
Jeffrey Eldred,
Valeri Lebedev,
Alexander Valishev
Abstract:
The Fermilab accelerator complex delivers intense high-energy proton beams to a variety of fixed-target scientific programs, including a flagship long-baseline neutrino program. With the advent of the Deep Underground Neutrino Experiment (DUNE) and Long Baseline Neutrino Facility (LBNF) program there is strong motivation for a 2.4 MW beam power upgrade of the Fermilab proton facility. We show the…
▽ More
The Fermilab accelerator complex delivers intense high-energy proton beams to a variety of fixed-target scientific programs, including a flagship long-baseline neutrino program. With the advent of the Deep Underground Neutrino Experiment (DUNE) and Long Baseline Neutrino Facility (LBNF) program there is strong motivation for a 2.4 MW beam power upgrade of the Fermilab proton facility. We show the Fermilab proton facility can achieve 2.4~MW with a new rapid-cycling synchrotron (RCS) to replace the Fermilab Booster and we provide a comprehensive technical analysis of the RCS-based facility design. Past design efforts and operational experience at the Fermilab Booster, J-PARC RCS, and Oak Ridge SNS are leveraged to provide strong empirical precedent for the design. We provide a parametric study of slip-stacking accumulation, RCS extraction energy, space-charge limits, beampipe aperture, eddy current heating, injection foil heating, and lattice optics. The 2.4 MW benchmark for the long baseline neutrino program is achieved independently of a previously proposed multi-GeV linac program, but we assess the impact the linac upgrade would have on RCS performance.
△ Less
Submitted 10 May, 2019; v1 submitted 29 March, 2019;
originally announced March 2019.
-
Commissioning and Operation of FAST Electron Linac at Fermilab
Authors:
A. Romanov,
C. Baffes,
D. R. Broemmelsiek,
K. Carlson,
D. J. Crawford,
N. Eddy,
D. Edstrom Jr.,
E. R. Harms,
J. Hurd,
M. Kucera,
J. Leibfritz,
I. Rakhno,
J. Reid,
J. Ruan,
J. Santucci,
V. Shiltsev,
G. Stancari,
R. Thurman-Keup,
A. Valishev,
A. Warner
Abstract:
We report results of the beam commissioning and first operation of the 1.3 GHz superconducting RF electron linear accelerator at Fermilab Accelerator Science and Technology (FAST) facility. Construction of the linac was completed and the machine was commissioned with beam in 2017. The maximum total beam energy of about 300 MeV was achieved with the record energy gain of 250 MeV in the ILC-type SRF…
▽ More
We report results of the beam commissioning and first operation of the 1.3 GHz superconducting RF electron linear accelerator at Fermilab Accelerator Science and Technology (FAST) facility. Construction of the linac was completed and the machine was commissioned with beam in 2017. The maximum total beam energy of about 300 MeV was achieved with the record energy gain of 250 MeV in the ILC-type SRF cryomodule. The photoinjector was tuned to produce trains of 200 pC bunches with a frequency of 3 MHz at a repetition rate of 1 Hz. This report describes the aspects of machine commissioning such as tuning of the SRF cryomodule and beam optics optimization. We also present highlights of an experimental program carried out parasitically during the two-month run, including studies of wake-fields, and advanced beam phase space manipulation.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Record High-Gradient SRF Beam Acceleration at Fermilab
Authors:
Daniel Broemmelsiek,
Brian Chase,
Dean Edstrom,
Elvin Harms,
Jerry Leibfritz,
Sergei Nagaitsev,
Yuri Pischalnikov,
Alexander Romanov,
Jinhao Ruan,
Warren Schappert,
Vladimir Shiltsev,
Randy Thurman-Keup,
Alexander Valishev
Abstract:
Many modern and future particle accelerators employ high gradient superconducting RF (SRF) to generate beams of high energy, high intensity and high brightness for research in high energy and nuclear physics, basic energy sciences, etc. In this paper we report the record performance large-scale SRF system with average beam accelerating gradient matching the ILC specification of 31.5MV/m. Design of…
▽ More
Many modern and future particle accelerators employ high gradient superconducting RF (SRF) to generate beams of high energy, high intensity and high brightness for research in high energy and nuclear physics, basic energy sciences, etc. In this paper we report the record performance large-scale SRF system with average beam accelerating gradient matching the ILC specification of 31.5MV/m. Design of the eight cavity 1.3 GHz SRF cryomodule, its performance without the beam and results of the system commissioning with high intensity electron beam at FAST (Fermilab Accelerator Science and Technology) facility are presented. We also briefly discuss opportunities for further beam studies and tests at FAST including those on even higher gradient and more efficient SRF acceleration.
△ Less
Submitted 9 August, 2018;
originally announced August 2018.
-
Adaptive Matching Of The IOTA Ring Linear Optics For Space Charge Compensation
Authors:
A. Romanov,
A. Valishev,
D. L. Bruhwiler,
N. Cook,
C. Hall
Abstract:
Many present and future accelerators must operate with high intensity beams when distortions induced by space charge forces are among major limiting factors. Betatron tune depression of above approximately 0.1 per cell leads to significant distortions of linear optics. Many aspects of machine operation depend on proper relations between lattice functions and phase advances, and can be improved wit…
▽ More
Many present and future accelerators must operate with high intensity beams when distortions induced by space charge forces are among major limiting factors. Betatron tune depression of above approximately 0.1 per cell leads to significant distortions of linear optics. Many aspects of machine operation depend on proper relations between lattice functions and phase advances, and can be improved with proper treatment of space charge effects. We implement an adaptive algorithm for linear lattice re matching with full account of space charge in the linear approximation for the case of Fermilab's IOTA ring. The method is based on a search for initial second moments that give closed solution and, at the same time, satisfy predefined set of goals for emittances, beta functions, dispersions and phase advances at and between points of interest. Iterative singular value decomposition based technique is used to search for optimum by varying wide array of model parameters.
△ Less
Submitted 7 May, 2018;
originally announced May 2018.
-
Space-Charge Simulation of Integrable Rapid Cycling Synchrotron
Authors:
J. Eldred,
A. Valishev
Abstract:
Integrable optics is an innovation in particle accelerator design that enables strong nonlinear focusing without generating parametric resonances. We use the Synergia tracking code to investigate the application of integrable optics to high-intensity hadron rings. We consider an integrable rapid-cycling synchrotron (iRCS) designed to replace the Fermilab Booster. We find that incorporating integra…
▽ More
Integrable optics is an innovation in particle accelerator design that enables strong nonlinear focusing without generating parametric resonances. We use the Synergia tracking code to investigate the application of integrable optics to high-intensity hadron rings. We consider an integrable rapid-cycling synchrotron (iRCS) designed to replace the Fermilab Booster. We find that incorporating integrability into the design suppresses the beam halo generated by a mismatched KV beam. Our iRCS design includes other features of modern ring design such as low momentum compaction factor and harmonically canceling sextupoles. Experimental tests of high-intensity beams in integrable lattices will take place over the next several years at the Fermilab Integrable Optics Test Accelerator (IOTA) and the University of Maryland Electron Ring (UMER).
△ Less
Submitted 5 May, 2018;
originally announced May 2018.
-
Resonant and random excitations on the proton beam in the Large Hadron Collider for active halo control with pulsed hollow electron lenses
Authors:
Miriam Fitterer,
Giulio Stancari,
Alexander Valishev,
Stefano Redaelli,
Daniel Valuch
Abstract:
We present the results of numerical simulations and experimental studies about the effects of resonant and random excitations on proton losses, emittances, and beam distributions in the Large Hadron Collider (LHC). In addition to shedding light on complex nonlinear effects, these studies are applied to the design of hollow electron lenses (HEL) for active beam halo control. In the High-Luminosity…
▽ More
We present the results of numerical simulations and experimental studies about the effects of resonant and random excitations on proton losses, emittances, and beam distributions in the Large Hadron Collider (LHC). In addition to shedding light on complex nonlinear effects, these studies are applied to the design of hollow electron lenses (HEL) for active beam halo control. In the High-Luminosity Large Hadron Collider (HL-LHC), a considerable amount of energy will be stored in the beam tails. To control and clean the beam halo, the installation of two hollow electron lenses, one per beam, is being considered. In standard electron-lens operation, a proton bunch sees the same electron current at every revolution. Pulsed electron beam operation (i.e., different currents for different turns) is also considered, because it can widen the range of achievable halo removal rates. For an axially symmetric electron beam, only protons in the halo are excited. If a residual field is present at the location of the beam core, these particles are exposed to time-dependent transverse kicks and to noise. We discuss the numerical simulations and the experiments conducted in 2016 and 2017 at injection energy in the LHC. The excitation patterns were generated by the transverse feedback and damping system, which acted as a flexible source of dipole kicks. Proton beam losses, emittances, and transverse distributions were recorded as a function of excitation patterns and strengths. The resonant excitations induced rich dynamical effects and nontrivial changes of the beam distributions, which, to our knowledge, have not previously been observed and studied in this detail. We conclude with a discussion of the tolerable and achievable residual fields and proposals for further studies.
△ Less
Submitted 26 September, 2019; v1 submitted 19 April, 2018;
originally announced April 2018.
-
Notes on the design of experiments and beam diagnostics with synchrotron light detected by a gated photomultiplier for the Fermilab superconducting electron linac and for the Integrable Optics Test Accelerator (IOTA)
Authors:
Giulio Stancari,
Aleksandr Romanov,
Jinhao Ruan,
James Santucci,
Randy Thurman-Keup,
Alexander Valishev
Abstract:
We outline the design of beam experiments for the electron linac at the Fermilab Accelerator Science and Technology (FAST) facility and for the Integrable Optics Test Accelerator (IOTA), based on synchrotron light emitted by the electrons in bend dipoles, detected with gated microchannel-plate photomultipliers (MCP-PMTs). The system can be used both for beam diagnostics (e.g., beam intensity with…
▽ More
We outline the design of beam experiments for the electron linac at the Fermilab Accelerator Science and Technology (FAST) facility and for the Integrable Optics Test Accelerator (IOTA), based on synchrotron light emitted by the electrons in bend dipoles, detected with gated microchannel-plate photomultipliers (MCP-PMTs). The system can be used both for beam diagnostics (e.g., beam intensity with full dynamic range, turn-by-turn beam vibrations, etc.) and for scientific experiments, such as the direct observation of the time structure of the radiation emitted by single electrons in a storage ring. The similarity between photon pulses and spectrum at the downstream end of the electron linac and in the IOTA ring allows one to test the apparatus during commissioning of the linac.
△ Less
Submitted 8 November, 2017;
originally announced November 2017.
-
The Effect of Electron Lens as Landau Damping Device on Single Particle Dynamics in HL-LHC
Authors:
Alexander Valishev
Abstract:
An electron lens can serve as an effective mechanism for suppressing coherent instabilities in high intensity storage rings through nonlinear amplitude dependent betatron tune shift. However, the addition of a strong localized nonlinear focusing element to the accelerator lattice may lead to undesired effects in particle dynamics. We evaluate the effect of a Gaussian electron lens on single partic…
▽ More
An electron lens can serve as an effective mechanism for suppressing coherent instabilities in high intensity storage rings through nonlinear amplitude dependent betatron tune shift. However, the addition of a strong localized nonlinear focusing element to the accelerator lattice may lead to undesired effects in particle dynamics. We evaluate the effect of a Gaussian electron lens on single particle motion in HL-LHC using numerical tracking simulations, and compare the results to the case when an equal tune spread is generated by conventional octupole magnets.
△ Less
Submitted 25 July, 2017;
originally announced July 2017.
-
Landau Damping of Beam Instabilities by Electron Lenses
Authors:
Vladimir Shiltsev,
Yuri Alexahin,
Alexey Burov,
Alexander Valishev
Abstract:
Modern and future particle accelerators employ increasingly higher intensity and brighter beams of charged particles and become operationally limited by coherent beam instabilities. Usual methods to control the instabilities, such as octupole magnets, beam feedback dampers and use of chromatic effects, become less effective and insufficient. We show that, in contrast, Lorentz forces of a low-energ…
▽ More
Modern and future particle accelerators employ increasingly higher intensity and brighter beams of charged particles and become operationally limited by coherent beam instabilities. Usual methods to control the instabilities, such as octupole magnets, beam feedback dampers and use of chromatic effects, become less effective and insufficient. We show that, in contrast, Lorentz forces of a low-energy, a magnetically stabilized electron beam, or "electron lens", easily introduces transverse nonlinear focusing sufficient for Landau damping of transverse beam instabilities in accelerators. It is also important that, unlike other nonlinear elements, the electron lens provides the frequency spread mainly at the beam core, thus allowing much higher frequency spread without lifetime degradation. For the parameters of the Future Circular Collider, a single conventional electron lens a few meters long would provide stabilization superior to tens of thousands of superconducting octupole magnets.
△ Less
Submitted 26 June, 2017;
originally announced June 2017.
-
Machine Layout and Performance
Authors:
D. Angal-Kalinin,
R. Appleby,
G. Arduini,
D. Banfi,
J. Barranco,
N. Biancacci,
D. Brett,
R. Bruce,
O. Bruening,
X. Buffat,
A. Burov,
Y. Cai,
R. Calaga,
A. Chancé,
M. Crouch,
B. Dalena,
H. Day,
R. de Maria,
J. Esteban Muller,
S. Fartoukh,
M. Fitterer,
O. Frasciello,
M. Giovannozzi,
W. Herr,
W. Höfle
, et al. (35 additional authors not shown)
Abstract:
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temper…
▽ More
Chapter 2 in High-Luminosity Large Hadron Collider (HL-LHC) : Preliminary Design Report. The Large Hadron Collider (LHC) is one of the largest scientific instruments ever built. Since opening up a new energy frontier for exploration in 2010, it has gathered a global user community of about 7,000 scientists working in fundamental particle physics and the physics of hadronic matter at extreme temperature and density. To sustain and extend its discovery potential, the LHC will need a major upgrade in the 2020s. This will increase its luminosity (rate of collisions) by a factor of five beyond the original design value and the integrated luminosity (total collisions created) by a factor ten. The LHC is already a highly complex and exquisitely optimised machine so this upgrade must be carefully conceived and will require about ten years to implement. The new configuration, known as High Luminosity LHC (HL-LHC), will rely on a number of key innovations that push accelerator technology beyond its present limits. Among these are cutting-edge 11-12 tesla superconducting magnets, compact superconducting cavities for beam rotation with ultra-precise phase control, new technology and physical processes for beam collimation and 300 metre-long high-power superconducting links with negligible energy dissipation. The present document describes the technologies and components that will be used to realise the project and is intended to serve as the basis for the detailed engineering design of HL-LHC.
△ Less
Submitted 26 May, 2017;
originally announced May 2017.
-
Correction of magnetic optics and beam trajectory using LOCO based algorithm with expanded experimental data sets
Authors:
A. Romanov,
D. Edstrom Jr.,
F. A. Emanov,
I. A. Koop,
E. A. Perevedentsev,
Yu. A. Rogovsky,
D. B. Shwartz,
A. Valishev
Abstract:
Precise beam based measurement and correction of magnetic optics is essential for the successful operation of accelerators. The LOCO algorithm is a proven and reliable tool, which in some situations can be improved by using a broader class of experimental data. The standard data sets for LOCO include the closed orbit responses to dipole corrector variation, dispersion, and betatron tunes. This pap…
▽ More
Precise beam based measurement and correction of magnetic optics is essential for the successful operation of accelerators. The LOCO algorithm is a proven and reliable tool, which in some situations can be improved by using a broader class of experimental data. The standard data sets for LOCO include the closed orbit responses to dipole corrector variation, dispersion, and betatron tunes. This paper discusses the benefits from augmenting the data with four additional classes of experimental data: the beam shape measured with beam profile monitors; responses of closed orbit bumps to focusing field variations; betatron tune responses to focusing field variations; BPM-to-BPM betatron phase advances and beta functions in BPMs from turn-by-turn coordinates of kicked beam. All of the described features were implemented in the Sixdsimulation software that was used to correct the optics of the VEPP-2000 collider, the VEPP-5 injector booster ring, and the FAST linac.
△ Less
Submitted 28 March, 2017;
originally announced March 2017.
-
Design Considerations for Proposed Fermilab Integrable RCS
Authors:
Jeffrey Eldred,
Alexander Valishev
Abstract:
Integrable optics is an innovation in particle accelerator design that provides strong nonlinear focusing while avoiding parametric resonances. One promising application of integrable optics is to overcome the traditional limits on accelerator intensity imposed by betatron tune-spread and collective instabilities. The efficacy of high-intensity integrable accelerators will be undergo comprehensive…
▽ More
Integrable optics is an innovation in particle accelerator design that provides strong nonlinear focusing while avoiding parametric resonances. One promising application of integrable optics is to overcome the traditional limits on accelerator intensity imposed by betatron tune-spread and collective instabilities. The efficacy of high-intensity integrable accelerators will be undergo comprehensive testing over the next several years at the Fermilab Integrable Optics Test Accelerator (IOTA) and the University of Maryland Electron Ring (UMER). We propose an integrable Rapid-Cycling Synchrotron (iRCS) as a replacement for the Fermilab Booster to achieve multi-MW beam power for the Fermilab high-energy neutrino program. We provide a overview of the machine parameters and discuss an approach to lattice optimization. Integrable optics requires arcs with integer-pi phase advance followed by drifts with matched beta functions. We provide an example integrable lattice with features of a modern RCS - long dispersion-free drifts, low momentum compaction, superperiodicity, chromaticity correction, separate-function magnets, and bounded beta functions.
△ Less
Submitted 2 March, 2017;
originally announced March 2017.
-
Integrable RCS as a proposed replacement for Fermilab Booster
Authors:
Jeffrey Eldred,
Alexander Valishev
Abstract:
Integrable optics is an innovation in particle accelerator design that potentially enables a greater betatron tune spread and damps collective instabilities. An integrable rapid-cycling synchrotron (RCS) would be an effective replacement for the Fermilab Booster, as part of a plan to reach multi-MW beam power at 120 GeV for the Fermilab high-energy neutrino program. We provide an example integrabl…
▽ More
Integrable optics is an innovation in particle accelerator design that potentially enables a greater betatron tune spread and damps collective instabilities. An integrable rapid-cycling synchrotron (RCS) would be an effective replacement for the Fermilab Booster, as part of a plan to reach multi-MW beam power at 120 GeV for the Fermilab high-energy neutrino program. We provide an example integrable lattice with features of a modern RCS - dispersion-free drifts, low momentum compaction factor, superperiodicity, chromaticity correction, bounded beta functions, and separate-function magnets.
△ Less
Submitted 2 March, 2017;
originally announced March 2017.
-
IOTA (Integrable Optics Test Accelerator): Facility and Experimental Beam Physics Program
Authors:
Sergei Antipov,
Daniel Broemmelsiek,
David Bruhwiler,
Dean Edstrom,
Elvin Harms,
Valery Lebedev,
Jerry Leibfritz,
Sergei Nagaitsev,
Chong-Shik Park,
Henryk Piekarz,
Philippe Piot,
Eric Prebys,
Alexander Romanov,
Jinhao Ruan,
Tanaji Sen,
Giulio Stancari,
Charles Thangaraj,
Randy Thurman-Keup,
Alexander Valishev,
Vladimir Shiltsev
Abstract:
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, b…
▽ More
The Integrable Optics Test Accelerator (IOTA) is a storage ring for advanced beam physics research currently being built and commissioned at Fermilab. It will operate with protons and electrons using injectors with momenta of 70 and 150 MeV/c, respectively. The research program includes the study of nonlinear focusing integrable optical beam lattices based on special magnets and electron lenses, beam dynamics of space-charge effects and their compensation, optical stochastic cooling, and several other experiments. In this article, we present the design and main parameters of the facility, outline progress to date and provide the timeline of the construction, commissioning and research. The physical principles, design, and hardware implementation plans for the major IOTA experiments are also discussed.
△ Less
Submitted 19 December, 2016;
originally announced December 2016.
-
Effect of pulsed hollow electron-lens operation on the proton beam core in LHC
Authors:
Miriam Fitterer,
Giulio Stancari,
Alexander Valishev
Abstract:
Collimation with hollow electron beams is currently one of the most promising concepts for active halo control in the HL-LHC. In order to further increase the diffusion rates for a fast halo removal as e.g. desired before the squeeze, the electron lens (e-lens) can be operated in pulsed mode. In case of profile imperfections in the electron beam the pulsing of the e-lens induces noise on the proto…
▽ More
Collimation with hollow electron beams is currently one of the most promising concepts for active halo control in the HL-LHC. In order to further increase the diffusion rates for a fast halo removal as e.g. desired before the squeeze, the electron lens (e-lens) can be operated in pulsed mode. In case of profile imperfections in the electron beam the pulsing of the e-lens induces noise on the proton beam which can, depending on the frequency content and strength, lead to emittance growth. In order to study the sensitivity to the pulsing pattern and the amplitude, a beam study (machine development MD) at the LHC has been proposed for August 2016 and we present in this note the preparatory simulations and estimates.
△ Less
Submitted 8 November, 2016;
originally announced November 2016.
-
Mechanical stability study for Integrable Optics Test Accelerator at Fermilab
Authors:
M. W. McGee,
R. Andrews,
K. Carlson,
J. Leibfritz,
L. Nobrega,
A. Valishev
Abstract:
The Integrable Optics Test Accelerator (IOTA) is proposed for operation at Fermilab. The goal of IOTA is to create practical nonlinear accelerator focusing systems with a large frequency spread and stable particle motion. The IOTA is a 40 m circumference, 150 MeV (e-), 2.5 MeV (p+) diagnostic test ring. A heavy low frequency steel floor girder is proposed as the primary tier for IOTA device compon…
▽ More
The Integrable Optics Test Accelerator (IOTA) is proposed for operation at Fermilab. The goal of IOTA is to create practical nonlinear accelerator focusing systems with a large frequency spread and stable particle motion. The IOTA is a 40 m circumference, 150 MeV (e-), 2.5 MeV (p+) diagnostic test ring. A heavy low frequency steel floor girder is proposed as the primary tier for IOTA device component support. Two design lengths; (8) 3.96 m and (2) 3.1 m long girders with identical cross section completely encompass the ring. This study focuses on the 3.96 m length girder and the development of a working prototype. Hydrostatic Level Sensor (HLS), temperature, metrology and fast motion measurements characterize the anticipated mechanical stability of the IOTA ring.
△ Less
Submitted 1 July, 2016;
originally announced July 2016.
-
Stripline kicker for integrable optics test accelerator
Authors:
Sergey A. Antipov,
Alexander Didenko,
Valeri Lebedev,
Alexander Valishev
Abstract:
We present a design of a stripline kicker for Integrable Optics Test Accelerator (IOTA). For its experimental program IOTA needs two full-aperture kickers, capable to create an arbitrary controllable kick in 2D. For that reason their strengths are variable in a wide range of amplitudes up to 16 mrad, and the pulse length 100 ns is less than a revolution period for electrons. In addition, the kicke…
▽ More
We present a design of a stripline kicker for Integrable Optics Test Accelerator (IOTA). For its experimental program IOTA needs two full-aperture kickers, capable to create an arbitrary controllable kick in 2D. For that reason their strengths are variable in a wide range of amplitudes up to 16 mrad, and the pulse length 100 ns is less than a revolution period for electrons. In addition, the kicker should have a physical aperture of 40 mm for a proposed operation with proton beam, and an outer size of 70 mm to fit inside existing quadrupole magnets to save space in the ring. Computer simulations using CST Microwave Studio show high field uniformity and wave impedance close to 50 Ω.
△ Less
Submitted 30 June, 2016;
originally announced July 2016.
-
Single-Particle Dynamics in a Nonlinear Accelerator Lattice: Attaining a Large Tune Spread with Octupoles in IOTA
Authors:
Sergey A. Antipov,
Sergei Nagaitsev,
Alexander Valishev
Abstract:
Fermilab is constructing the Integrable Optics Test Accelerator (IOTA) as the centerpiece of the Accelerator R&D Program towards high-intensity circular machines. One of the factors limiting the beam intensity in present circular accelerators is collective instabilities, which can be suppressed by a spread of betatron frequencies (tunes) through the Landau damping mechanism or by an external dampe…
▽ More
Fermilab is constructing the Integrable Optics Test Accelerator (IOTA) as the centerpiece of the Accelerator R&D Program towards high-intensity circular machines. One of the factors limiting the beam intensity in present circular accelerators is collective instabilities, which can be suppressed by a spread of betatron frequencies (tunes) through the Landau damping mechanism or by an external damper, if the instability is slow enough. The spread is usually created by octupole magnets, which introduce the tune dependence on the amplitude and, in some cases, by a chromatic spread (tune dependence on particle's momentum). The introduction of octupoles usually has both the beneficial (improved Landau damping) and harmful properties, such as a resonant behavior and a reduction of the dynamic aperture. One of the research goals at the IOTA ring is to achieve a large betatron tune spread, while retaining a large dynamic aperture, using conventional octupole magnets in a special but realistic accelerator configuration. In this paper, we present results of computer simulations of an electron beam in the IOTA by particle tracking and the Frequency Map Analysis. The results show that the ring's octupole magnets can be configured to provide a betatron tune shift of 0.08 (for particles at large amplitudes) with the dynamical aperture of over 20 beam sigma for a 150-MeV electron beam. The influence of the synchrotron motion, lattice errors, and magnet imperfections is insignificant for the parameters and levels of tolerances set by the design of the ring. The described octupole insert could be beneficial for enhancing Landau damping in high intensity machines.
△ Less
Submitted 28 March, 2017; v1 submitted 28 April, 2016;
originally announced April 2016.
-
Accelerator physics and technology research toward future multi-MW proton accelerators
Authors:
V. Shiltsev,
P. Hurh,
A. Romanenko,
A. Valishev,
R. Zwaska
Abstract:
Recent P5 report indicated the accelerator-based neutrino and rare decay physics research as a centrepiece of the US domestic HEP program. Operation, upgrade and development of the accelerators for the near-term and longer-term particle physics program at the Intensity Frontier face formidable challenges. Here we discuss accelerator physics and technology research toward future multi-MW proton acc…
▽ More
Recent P5 report indicated the accelerator-based neutrino and rare decay physics research as a centrepiece of the US domestic HEP program. Operation, upgrade and development of the accelerators for the near-term and longer-term particle physics program at the Intensity Frontier face formidable challenges. Here we discuss accelerator physics and technology research toward future multi-MW proton accelerators.
△ Less
Submitted 5 November, 2015;
originally announced November 2015.
-
Electron lenses and cooling for the Fermilab Integrable Optics Test Accelerator
Authors:
G. Stancari,
A. Burov,
V. Lebedev,
S. Nagaitsev,
E. Prebys,
A. Valishev
Abstract:
Recently, the study of integrable Hamiltonian systems has led to nonlinear accelerator lattices with one or two transverse invariants and wide stable tune spreads. These lattices may drastically improve the performance of high-intensity machines, providing Landau damping to protect the beam from instabilities, while preserving dynamic aperture. The Integrable Optics Test Accelerator (IOTA) is bein…
▽ More
Recently, the study of integrable Hamiltonian systems has led to nonlinear accelerator lattices with one or two transverse invariants and wide stable tune spreads. These lattices may drastically improve the performance of high-intensity machines, providing Landau damping to protect the beam from instabilities, while preserving dynamic aperture. The Integrable Optics Test Accelerator (IOTA) is being built at Fermilab to study these concepts with 150-MeV pencil electron beams (single-particle dynamics) and 2.5-MeV protons (dynamics with self fields). One way to obtain a nonlinear integrable lattice is by using the fields generated by a magnetically confined electron beam (electron lens) overlapping with the circulating beam. The required parameters are similar to the ones of existing devices. In addition, the electron lens will be used in cooling mode to control the brightness of the proton beam and to measure transverse profiles through recombination. More generally, it is of great interest to investigate whether nonlinear integrable optics allows electron coolers to exceed limitations set by both coherent or incoherent instabilities excited by space charge.
△ Less
Submitted 5 November, 2015;
originally announced November 2015.
-
DAFNE Consolidation Program and Operation with the KLOE-2 Detector
Authors:
Catia Milardi,
David Alesini,
Maria Enrica Biagini,
Simone Bini,
Manuela Boscolo,
Bruno Buonomo,
Sergio Cantarella,
Antonio De Santis,
Giampiero Di Pirro,
Giovanni Delle Monache,
Alessandro Drago,
Luca Foggetta,
Oscar Frasciello,
Alessandro Gallo,
Riccardo Gargana,
Andrea Ghigo,
Francesco Guatieri,
Susanna Guiducci,
Franco Iungo,
Carlo Ligi,
Andrea Michelotti,
Luigi Pellegrino,
Ruggero Ricci,
Ugo Rotundo,
Giancarlo Sensolini
, et al. (5 additional authors not shown)
Abstract:
After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measure…
▽ More
After a long preparatory phase, including a wide hardware consolidation program, the Italian lepton collider DAFNE, is now systematically delivering data to the KLOE-2 experiment. In approximately 200 days of operation 1 fb-1 has been given to the detector limiting the background to a level compatible with an efficient data acquisition. Instantaneous and maximum daily integrated luminosity measured, so far, are considerably higher with respect to the previous KLOE runs, and are: L(inst) ~ 2.0 1032 cm-2s-1, and L(day) ~ 12.5 pb-1 respectively. A general review concerning refurbishing activities, machine optimization efforts and data taking performances is presented and discussed.
△ Less
Submitted 28 September, 2015;
originally announced September 2015.
-
Numerical analysis of parasitic crossing compensation with wires in DAΦNE
Authors:
A. Valishev,
D. Shatilov,
C. Milardi,
M. Zobov
Abstract:
Current bearing wire compensators were successfully used in the 2005-2006 run of the DAΦNE collider to mitigate the detrimental effects of parasitic beam-beam interactions. A marked improvement of the positron beam lifetime was observed in machine operation with the KLOE detector. In view of the possible application of wire beam-beam compensators for the High Luminosity LHC upgrade, we revisit the…
▽ More
Current bearing wire compensators were successfully used in the 2005-2006 run of the DAΦNE collider to mitigate the detrimental effects of parasitic beam-beam interactions. A marked improvement of the positron beam lifetime was observed in machine operation with the KLOE detector. In view of the possible application of wire beam-beam compensators for the High Luminosity LHC upgrade, we revisit the DAΦNE experiments. We use an improved model of the accelerator with the goal to validate the modern simulation tools and provide valuable input for the LHC upgrade project.
△ Less
Submitted 24 June, 2015;
originally announced June 2015.
-
Simulation of Crab Waist Collisions In DAΦNE With KLOE-2 Interaction Region
Authors:
Mikhail Zobov,
Alexander Valishev,
Dmitry Shatilov,
Catia Milardi,
Antonio De Santis,
Alessandro Drago,
Alessandro Gallo
Abstract:
After the successful completion of the SIDDHARTA experiment run with crab waist collisions, the electron- positron collider DAΦNE has started routine operations for the KLOE-2 detector. The new interaction region also exploits the crab waist collision scheme, but features certain complications including the experimental detector solenoid, compensating anti-solenoids, and tilted quadrupole magnets.…
▽ More
After the successful completion of the SIDDHARTA experiment run with crab waist collisions, the electron- positron collider DAΦNE has started routine operations for the KLOE-2 detector. The new interaction region also exploits the crab waist collision scheme, but features certain complications including the experimental detector solenoid, compensating anti-solenoids, and tilted quadrupole magnets. We have performed simulations of the beam-beam collisions in the collider taking into account the real DAΦNE nonlinear lattice. In particular, we have evaluated the effect of crab waist sextupoles and beam-beam interactions on the DAΦNE dynamical aperture and energy acceptance, and estimated the luminosity that can be potentially achieved with and without crab waist sextupoles in the present working conditions. A numerical analysis has been performed in order to propose possible steps for further luminosity increase in DAΦNE such as a better working point choice, crab sextupole strength optimization, correction of the phase advance between the sextupoles and the interaction region. The proposed change of the e- ring working point was implemented and resulted in a significant performance increase.
△ Less
Submitted 19 August, 2016; v1 submitted 24 June, 2015;
originally announced June 2015.
-
Chromatic and Dispersive Effects in Nonlinear Integrable Optics
Authors:
Stephen D. Webb,
David L. Bruhwiler,
Alexander Valishev,
Sergei N. Nagaitsev,
Viatcheslav V. Danilov
Abstract:
Proton accumulator rings and other circular hadron accelerators are susceptible to intensity-driven parametric instabilities because the zero-current charged particle dynamics are characterized by a single tune. Landau damping can suppress these instabilities, which requires energy spread in the beam or introducing nonlinear magnets such as octupoles. However, this approach reduces dynamic apertur…
▽ More
Proton accumulator rings and other circular hadron accelerators are susceptible to intensity-driven parametric instabilities because the zero-current charged particle dynamics are characterized by a single tune. Landau damping can suppress these instabilities, which requires energy spread in the beam or introducing nonlinear magnets such as octupoles. However, this approach reduces dynamic aperture. Nonlinear integrable optics can suppress parametric instabilities independent of energy spread in the distribution, while preserving the dynamic aperture. This novel approach promises to reduce particle losses and enable order-of-magnitude increases in beam intensity. In this paper we present results, obtained using the Lie operator formalism, on how chromaticity and dispersion affect particle orbits in integrable optics. We conclude that chromaticity in general breaks the integrability, unless the vertical and horizontal chromaticities are equal. Because of this, the chromaticity correcting magnets can be weaker and fewer correcting magnet families are required, thus minimizing the impact on dynamic aperture.
△ Less
Submitted 18 May, 2015; v1 submitted 22 April, 2015;
originally announced April 2015.
-
Quasi-Integrable Nonlinear Optics Experiment at IOTA
Authors:
S. A. Antipov,
S. Nagaitsev,
A. Valishev
Abstract:
At Integrable Optics Test Accelerator it is possible to create a nonlinear focusing optics with one invariant of motion using just conventional magnets. 6D simulations show that this will allow to achieve a tune spread of 0.05 without significant reduction of dynamic aperture.
At Integrable Optics Test Accelerator it is possible to create a nonlinear focusing optics with one invariant of motion using just conventional magnets. 6D simulations show that this will allow to achieve a tune spread of 0.05 without significant reduction of dynamic aperture.
△ Less
Submitted 5 February, 2015;
originally announced February 2015.
-
Long-range beam-beam effects in the Tevatron
Authors:
V. Shiltsev,
A. Valishev
Abstract:
Long-range beam-beam effects occurred in the Tevatron at all stages (injection, ramp, squeeze, and collisions) and affected both proton and antiproton beams. They resulted in beam losses and emittance blow-ups, which occurred in remarkable bunch-to-bunch dependent patterns. On the way to record-high luminosities of the collider, many issues related to the long-range beam-beam interactions have bee…
▽ More
Long-range beam-beam effects occurred in the Tevatron at all stages (injection, ramp, squeeze, and collisions) and affected both proton and antiproton beams. They resulted in beam losses and emittance blow-ups, which occurred in remarkable bunch-to-bunch dependent patterns. On the way to record-high luminosities of the collider, many issues related to the long-range beam-beam interactions have been addressed. Below we present a short overview of the long-range beam-beam effects in the Tevatron. (For a detailed discussion on the beam-beam effects in the Tevatron please see reviews in Refs. [1-3] and references therein).
△ Less
Submitted 14 October, 2014;
originally announced October 2014.
-
Conceptual design of hollow electron lenses for beam halo control in the Large Hadron Collider
Authors:
Giulio Stancari,
Valentina Previtali,
Alexander Valishev,
Roderik Bruce,
Stefano Redaelli,
Adriana Rossi,
Belen Salvachua Ferrando
Abstract:
Collimation with hollow electron beams is a technique for halo control in high-power hadron beams. It is based on an electron beam (possibly pulsed or modulated in intensity) guided by strong axial magnetic fields which overlaps with the circulating beam in a short section of the ring. The concept was tested experimentally at the Fermilab Tevatron collider using a hollow electron gun installed in…
▽ More
Collimation with hollow electron beams is a technique for halo control in high-power hadron beams. It is based on an electron beam (possibly pulsed or modulated in intensity) guided by strong axial magnetic fields which overlaps with the circulating beam in a short section of the ring. The concept was tested experimentally at the Fermilab Tevatron collider using a hollow electron gun installed in one of the Tevatron electron lenses. Within the US LHC Accelerator Research Program (LARP) and the European FP7 HiLumi LHC Design Study, we are proposing a conceptual design for applying this technique to the Large Hadron Collider at CERN. A prototype hollow electron gun for the LHC was built and tested. The expected performance of the hollow electron beam collimator was based on Tevatron experiments and on numerical tracking simulations. Halo removal rates and enhancements of halo diffusivity were estimated as a function of beam and lattice parameters. Proton beam core lifetimes and emittance growth rates were checked to ensure that undesired effects were suppressed. Hardware specifications were based on the Tevatron devices and on preliminary engineering integration studies in the LHC machine. Required resources and a possible timeline were also outlined, together with a brief discussion of alternative halo-removal schemes and of other possible uses of electron lenses to improve the performance of the LHC.
△ Less
Submitted 9 February, 2015; v1 submitted 8 May, 2014;
originally announced May 2014.
-
Detection of coherent beam-beam modes with digitized beam position monitor signals
Authors:
G. Stancari,
A. Valishev,
S. M. White
Abstract:
A system for bunch-by-bunch detection of transverse proton and antiproton coherent oscillations in the Fermilab Tevatron collider is described. It is based on the signal from a single beam-position monitor located in a region of the ring with large amplitude functions. The signal is digitized over a large number of turns and Fourier-analyzed offline with a dedicated algorithm. To enhance the signa…
▽ More
A system for bunch-by-bunch detection of transverse proton and antiproton coherent oscillations in the Fermilab Tevatron collider is described. It is based on the signal from a single beam-position monitor located in a region of the ring with large amplitude functions. The signal is digitized over a large number of turns and Fourier-analyzed offline with a dedicated algorithm. To enhance the signal, band-limited noise is applied to the beam for about 1 s. This excitation does not adversely affect the circulating beams even at high luminosities. The device has a response time of a few seconds, a frequency resolution of $1.6\times 10^{-5}$ in fractional tune, and it is sensitive to oscillation amplitudes of 60 nm. It complements Schottky detectors as a diagnostic tool for tunes, tune spreads, and beam-beam effects. Measurements of coherent mode spectra are presented and compared with models of beam-beam oscillations.
△ Less
Submitted 17 December, 2013;
originally announced December 2013.