-
Euclid preparation. XLII. A unified catalogue-level reanalysis of weak lensing by galaxy clusters in five imaging surveys
Authors:
Euclid Collaboration,
M. Sereno,
S. Farrens,
L. Ingoglia,
G. F. Lesci,
L. Baumont,
G. Covone,
C. Giocoli,
F. Marulli,
S. Miranda La Hera,
M. Vannier,
A. Biviano,
S. Maurogordato,
L. Moscardini,
N. Aghanim,
S. Andreon,
N. Auricchio,
M. Baldi,
S. Bardelli,
F. Bellagamba,
C. Bodendorf,
D. Bonino,
E. Branchini,
M. Brescia,
J. Brinchmann
, et al. (199 additional authors not shown)
Abstract:
Precise and accurate mass calibration is required to exploit galaxy clusters as astrophysical and cosmological probes in the Euclid era. Systematic errors in lensing signals by galaxy clusters can be empirically estimated by comparing different surveys with independent and uncorrelated systematics. To assess the robustness of the lensing results to systematic errors, we carried out end-to-end test…
▽ More
Precise and accurate mass calibration is required to exploit galaxy clusters as astrophysical and cosmological probes in the Euclid era. Systematic errors in lensing signals by galaxy clusters can be empirically estimated by comparing different surveys with independent and uncorrelated systematics. To assess the robustness of the lensing results to systematic errors, we carried out end-to-end tests across different data sets. We performed a unified analysis at the catalogue level by leveraging the Euclid combined cluster and weak-lensing pipeline (COMB-CL). COMB-CL will measure weak lensing cluster masses for the Euclid Survey. Heterogeneous data sets from five independent, recent, lensing surveys (CHFTLenS, DES~SV1, HSC-SSP~S16a, KiDS~DR4, and RCSLenS), which exploited different shear and photometric redshift estimation algorithms, were analysed with a consistent pipeline under the same model assumptions. We performed a comparison of the amplitude of the reduced excess surface density and of the mass estimates using lenses from the Planck PSZ2 and SDSS redMaPPer cluster samples. Mass estimates agree with literature results collected in the LC2 catalogues. Mass accuracy was further investigated considering the AMICO detected clusters in the HSC-SSP XXL North field. The consistency of the data sets was tested using our unified analysis framework. We found agreement between independent surveys, at the level of systematic noise in Stage-III surveys or precursors. This indicates successful control over systematics. If such control continues in Stage-IV, Euclid will be able to measure the weak lensing masses of around 13000 (considering shot noise only) or 3000 (noise from shape and large-scale-structure) massive clusters with a signal-to-noise ratio greater than 3.
△ Less
Submitted 11 April, 2024;
originally announced April 2024.
-
Euclid Preparation. XXXVII. Galaxy colour selections with Euclid and ground photometry for cluster weak-lensing analyses
Authors:
Euclid Collaboration,
G. F. Lesci,
M. Sereno,
M. Radovich,
G. Castignani,
L. Bisigello,
F. Marulli,
L. Moscardini,
L. Baumont,
G. Covone,
S. Farrens,
C. Giocoli,
L. Ingoglia,
S. Miranda La Hera,
M. Vannier,
A. Biviano,
S. Maurogordato,
N. Aghanim,
A. Amara,
S. Andreon,
N. Auricchio,
M. Baldi,
S. Bardelli,
R. Bender,
C. Bodendorf
, et al. (216 additional authors not shown)
Abstract:
We derived galaxy colour selections from Euclid and ground-based photometry, aiming to accurately define background galaxy samples in cluster weak-lensing analyses. Given any set of photometric bands, we developed a method for the calibration of optimal galaxy colour selections that maximises the selection completeness, given a threshold on purity. We calibrated galaxy selections using simulated g…
▽ More
We derived galaxy colour selections from Euclid and ground-based photometry, aiming to accurately define background galaxy samples in cluster weak-lensing analyses. Given any set of photometric bands, we developed a method for the calibration of optimal galaxy colour selections that maximises the selection completeness, given a threshold on purity. We calibrated galaxy selections using simulated ground-based $griz$ and Euclid $Y_{\rm E}J_{\rm E}H_{\rm E}$ photometry. Both selections produce a purity higher than 97%. The $griz$ selection completeness ranges from 30% to 84% in the lens redshift range $z_{\rm l}\in[0.2,0.8]$. With the full $grizY_{\rm E}J_{\rm E}H_{\rm E}$ selection, the completeness improves by up to $25$ percentage points, and the $z_{\rm l}$ range extends up to $z_{\rm l}=1.5$. The calibrated colour selections are stable to changes in the sample limiting magnitudes and redshift, and the selection based on $griz$ bands provides excellent results on real external datasets. The $griz$ selection is also purer at high redshift and more complete at low redshift compared to colour selections found in the literature. We find excellent agreement in terms of purity and completeness between the analysis of an independent, simulated Euclid galaxy catalogue and our calibration sample, except for galaxies at high redshifts, for which we obtain up to 50 percent points higher completeness. The combination of colour and photo-$z$ selections applied to simulated Euclid data yields up to 95% completeness, while the purity decreases down to 92% at high $z_{\rm l}$. We show that the calibrated colour selections provide robust results even when observations from a single band are missing from the ground-based data. Finally, we show that colour selections do not disrupt the shear calibration for stage III surveys.
△ Less
Submitted 24 January, 2024; v1 submitted 27 November, 2023;
originally announced November 2023.
-
Euclid preparation: VI. Verifying the Performance of Cosmic Shear Experiments
Authors:
Euclid Collaboration,
P. Paykari,
T. D. Kitching,
H. Hoekstra,
R. Azzollini,
V. F. Cardone,
M. Cropper,
C. A. J. Duncan,
A. Kannawadi,
L. Miller,
H. Aussel,
I. F. Conti,
N. Auricchio,
M. Baldi,
S. Bardelli,
A. Biviano,
D. Bonino,
E. Borsato,
E. Bozzo,
E. Branchini,
S. Brau-Nogue,
M. Brescia,
J. Brinchmann,
C. Burigana,
S. Camera
, et al. (106 additional authors not shown)
Abstract:
Our aim is to quantify the impact of systematic effects on the inference of cosmological parameters from cosmic shear. We present an end-to-end approach that introduces sources of bias in a modelled weak lensing survey on a galaxy-by-galaxy level. Residual biases are propagated through a pipeline from galaxy properties (one end) through to cosmic shear power spectra and cosmological parameter esti…
▽ More
Our aim is to quantify the impact of systematic effects on the inference of cosmological parameters from cosmic shear. We present an end-to-end approach that introduces sources of bias in a modelled weak lensing survey on a galaxy-by-galaxy level. Residual biases are propagated through a pipeline from galaxy properties (one end) through to cosmic shear power spectra and cosmological parameter estimates (the other end), to quantify how imperfect knowledge of the pipeline changes the maximum likelihood values of dark energy parameters. We quantify the impact of an imperfect correction for charge transfer inefficiency (CTI) and modelling uncertainties of the point spread function (PSF) for Euclid, and find that the biases introduced can be corrected to acceptable levels.
△ Less
Submitted 23 October, 2019;
originally announced October 2019.
-
Euclid preparation III. Galaxy cluster detection in the wide photometric survey, performance and algorithm selection
Authors:
Euclid Collaboration,
R. Adam,
M. Vannier,
S. Maurogordato,
A. Biviano,
C. Adami,
B. Ascaso,
F. Bellagamba,
C. Benoist,
A. Cappi,
A. Díaz-Sánchez,
F. Durret,
S. Farrens,
A. H. Gonzalez,
A. Iovino,
R. Licitra,
M. Maturi,
S. Mei,
A. Merson,
E. Munari,
R. Pelló,
M. Ricci,
P. F. Rocci,
M. Roncarelli,
F. Sarron
, et al. (34 additional authors not shown)
Abstract:
Galaxy cluster counts in bins of mass and redshift have been shown to be a competitive probe to test cosmological models. This method requires an efficient blind detection of clusters from surveys with a well-known selection function and robust mass estimates. The Euclid wide survey will cover 15000 deg$^2$ of the sky in the optical and near-infrared bands, down to magnitude 24 in the $H$-band. Th…
▽ More
Galaxy cluster counts in bins of mass and redshift have been shown to be a competitive probe to test cosmological models. This method requires an efficient blind detection of clusters from surveys with a well-known selection function and robust mass estimates. The Euclid wide survey will cover 15000 deg$^2$ of the sky in the optical and near-infrared bands, down to magnitude 24 in the $H$-band. The resulting data will make it possible to detect a large number of galaxy clusters spanning a wide-range of masses up to redshift $\sim 2$. This paper presents the final results of the Euclid Cluster Finder Challenge (CFC). The objective of these challenges was to select the cluster detection algorithms that best meet the requirements of the Euclid mission. The final CFC included six independent detection algorithms, based on different techniques, such as photometric redshift tomography, optimal filtering, hierarchical approach, wavelet and friend-of-friends algorithms. These algorithms were blindly applied to a mock galaxy catalog with representative Euclid-like properties. The relative performance of the algorithms was assessed by matching the resulting detections to known clusters in the simulations. Several matching procedures were tested, thus making it possible to estimate the associated systematic effects on completeness to $<3$%. All the tested algorithms are very competitive in terms of performance, with three of them reaching $>80$% completeness for a mean purity of 80% down to masses of $10^{14}$ M$_{\odot}$ and up to redshift $z=2$. Based on these results, two algorithms were selected to be implemented in the Euclid pipeline, the AMICO code, based on matched filtering, and the PZWav code, based on an adaptive wavelet approach. [abridged]
△ Less
Submitted 19 June, 2019; v1 submitted 11 June, 2019;
originally announced June 2019.
-
CT Super-resolution GAN Constrained by the Identical, Residual, and Cycle Learning Ensemble(GAN-CIRCLE)
Authors:
Chenyu You,
Guang Li,
Yi Zhang,
Xiaoliu Zhang,
Hongming Shan,
Shenghong Ju,
Zhen Zhao,
Zhuiyang Zhang,
Wenxiang Cong,
Michael W. Vannier,
Punam K. Saha,
Ge Wang
Abstract:
Computed tomography (CT) is widely used in screening, diagnosis, and image-guided therapy for both clinical and research purposes. Since CT involves ionizing radiation, an overarching thrust of related technical research is development of novel methods enabling ultrahigh quality imaging with fine structural details while reducing the X-ray radiation. In this paper, we present a semi-supervised dee…
▽ More
Computed tomography (CT) is widely used in screening, diagnosis, and image-guided therapy for both clinical and research purposes. Since CT involves ionizing radiation, an overarching thrust of related technical research is development of novel methods enabling ultrahigh quality imaging with fine structural details while reducing the X-ray radiation. In this paper, we present a semi-supervised deep learning approach to accurately recover high-resolution (HR) CT images from low-resolution (LR) counterparts. Specifically, with the generative adversarial network (GAN) as the building block, we enforce the cycle-consistency in terms of the Wasserstein distance to establish a nonlinear end-to-end mapping from noisy LR input images to denoised and deblurred HR outputs. We also include the joint constraints in the loss function to facilitate structural preservation. In this deep imaging process, we incorporate deep convolutional neural network (CNN), residual learning, and network in network techniques for feature extraction and restoration. In contrast to the current trend of increasing network depth and complexity to boost the CT imaging performance, which limit its real-world applications by imposing considerable computational and memory overheads, we apply a parallel $1\times1$ CNN to compress the output of the hidden layer and optimize the number of layers and the number of filters for each convolutional layer. Quantitative and qualitative evaluations demonstrate that our proposed model is accurate, efficient and robust for super-resolution (SR) image restoration from noisy LR input images. In particular, we validate our composite SR networks on three large-scale CT datasets, and obtain promising results as compared to the other state-of-the-art methods.
△ Less
Submitted 6 September, 2018; v1 submitted 10 August, 2018;
originally announced August 2018.
-
Use of a clinical PET/CT scanner for whole body biodistribution of intranasal nanoparticles
Authors:
Michael C Veronesi,
Marta Zamora,
Mohammed Bhuiyan,
Bill Obrien-Penney,
Chin Tu Chen,
Michael W Vannier
Abstract:
Whole body biodistribution of 100 nanometer sized polymer micellar nanoparticles (NPs) was determined following intranasal administration using PET/CT imaging on a clinical scanner. Nanoparticles labeled with Zirconium 89 were administered intranasally or intravenously to Sprague Dawley rats followed by serial ex vivo PET/CT imaging in a clinical scanner. At 30 minutes and 1 hour following intrana…
▽ More
Whole body biodistribution of 100 nanometer sized polymer micellar nanoparticles (NPs) was determined following intranasal administration using PET/CT imaging on a clinical scanner. Nanoparticles labeled with Zirconium 89 were administered intranasally or intravenously to Sprague Dawley rats followed by serial ex vivo PET/CT imaging in a clinical scanner. At 30 minutes and 1 hour following intranasal delivery, the animals were sacrificed and placed in the PET/CT scanner. Images were acquired and transferred to a workstation for post-processing. 3D regions of interest were constructed. A different set of animals were used for ex vivo verification. These animals were also administered 100 nm polymer micellar NPs and sacrificed at 30 min and 1 hr following intranasal or intravenous delivery via intra-cardiac perfusion. Various organs, including brain, lungs, heart, liver, spleen, stomach and intestines, were procured following exsanguination. A gamma counter determined activity in each organ for comparison with corresponding PET/CT region of interest activity measurements. The ex vivo measurements of activity were consistent with the image-based value determinations. Use of a clinical PET/CT scanner is a feasible means to determine the temporal and spatial distribution of radiolabeled agents after intranasal and intravenous delivery. This work may allow for quantitative in vivo testing of new radionanotheranostic agents.
△ Less
Submitted 3 April, 2017;
originally announced April 2017.
-
Bibliometric Index for Academic Leadership
Authors:
Yang Liu,
Fengrong Ou,
Yan Deng,
Bo Wu,
Ruxi Liu,
Hui Hua,
Yuyuan Guan,
Rentong Chen,
Lars Gjesteby,
Jiansheng Yang,
Michael Vannier,
Ge Wang
Abstract:
Academic leadership is essential for research innovation and impact. Until now, there has been no dedicated measure of leadership by bibliometrics. Popular bibliometric indices are mainly based on academic output, such as the journal impact factor and the number of citations. Here we develop an academic leadership index based on readily available bibliometric data that is sensitive to not only aca…
▽ More
Academic leadership is essential for research innovation and impact. Until now, there has been no dedicated measure of leadership by bibliometrics. Popular bibliometric indices are mainly based on academic output, such as the journal impact factor and the number of citations. Here we develop an academic leadership index based on readily available bibliometric data that is sensitive to not only academic output but also research efficiency. Our leadership index was tested in two studies on peer-reviewed journal papers by extramurally-funded principal investigators in the field of life sciences from China and the USA, respectively. The leadership performance of these principal investigators was quantified and compared relative to university rank and other factors. As a validation measure, we show that the highest average leadership index was achieved by principal investigators at top national universities in both countries. More interestingly, our results also indicate that on an individual basis, strong leadership and high efficiency are not necessarily associated with those at top-tier universities nor with the most funding. This leadership index may become the basis of a comprehensive merit system, facilitating academic evaluation and resource management.
△ Less
Submitted 12 October, 2016;
originally announced October 2016.
-
An overview of the mid-infrared spectro-interferometer MATISSE: science, concept, and current status
Authors:
A. Matter,
B. Lopez,
P. Antonelli,
M. Lehmitz,
F. Bettonvil,
U. Beckmann,
S. Lagarde,
W. Jaffe,
R. G. Petrov,
P. Berio,
F. Millour,
S. Robbe-Dubois,
A. Glindemann,
P. Bristow,
M. Schoeller,
T. Lanz,
T. Henning,
G. Weigelt,
M. Heininger,
S. Morel,
P. Cruzalebes,
K. Meisenheimer,
R. Hofferbert,
S. Wolf,
Y. Bresson
, et al. (82 additional authors not shown)
Abstract:
MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena a…
▽ More
MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal.
△ Less
Submitted 8 August, 2016;
originally announced August 2016.
-
AMBER/VLTI high spectral resolution observations of the Br$γ$ emitting region in HD 98922. A compact disc wind launched from the inner disc region
Authors:
A. Caratti o Garatti,
L. V. Tambovtseva,
R. Garcia Lopez,
S. Kraus,
D. Schertl,
V. P. Grinin,
G. Weigelt,
K. -H. Hofmann,
F. Massi,
S. Lagarde,
M. Vannier,
F. Malbet
Abstract:
We analyse the main physical parameters and the circumstellar environment of the young Herbig Be star HD 98922. We present AMBER/VLTI high spectral resolution (R =12000) interferometric observations across the Br$γ$ line, accompanied by UVES high-resolution spectroscopy and SINFONI-AO assisted near-infrared integral field spectroscopic data. To interpret our observations, we develop a magneto-cent…
▽ More
We analyse the main physical parameters and the circumstellar environment of the young Herbig Be star HD 98922. We present AMBER/VLTI high spectral resolution (R =12000) interferometric observations across the Br$γ$ line, accompanied by UVES high-resolution spectroscopy and SINFONI-AO assisted near-infrared integral field spectroscopic data. To interpret our observations, we develop a magneto-centrifugally driven disc-wind model. Our analysis of the UVES spectrum shows that HD 98922 is a young (~5x10^5 yr) Herbig Be star (SpT=B9V), located at a distance of 440(+60-50) pc, with a mass accretion rate of ~9+/-3x10^(-7) M_sun yr^(-1). SINFONI K-band AO-assisted imaging shows a spatially resolved circumstellar disc-like region (~140 AU in diameter) with asymmetric brightness distribution. Our AMBER/VLTI UT observations indicate that the Br$γ$ emitting region (radius ~0.31+/-0.04 AU) is smaller than the continuum emitting region (inner dust radius ~0.7+/-0.2 AU), showing significant non-zero V-shaped differential phases (i.e. non S-shaped, as expected for a rotating disc). The value of the continuum-corrected pure Br$γ$ line visibility at the longest baseline (89 m) is ~0.8+/-0.1, i.e. the Br$γ$ emitting region is partially resolved. Our modelling suggests that the observed Br$γ$ line-emitting region mainly originates from a disc wind with a half opening angle of 30deg, and with a mass-loss rate of ~2x10(-7) M_sun yr^(-1). The observed V-shaped differential phases are reliably reproduced by combining a simple asymmetric continuum disc model with our Br$γ$ disc-wind model. The Br$γ$ emission of HD 98922 can be modelled with a disc wind that is able to approximately reproduce all interferometric observations if we assume that the intensity distribution of the dust continuum disc is asymmetric.
△ Less
Submitted 4 August, 2015;
originally announced August 2015.
-
VLTI/AMBER differential interferometry of the broad-line region of the quasar 3C273
Authors:
Romain G. Petrov,
Florentin. Millour,
Stéphane Lagarde,
Martin Vannier,
Suvendu Rakshit,
Alessandro Marconi,
Gerd Weigelt
Abstract:
Unveiling the structure of the Broad Line Region (BLR) of AGNs is critical to understand the quasar phenomenon. Resolving a few BLRs by optical interferometry will bring decisive information to confront, complement and calibrate the reverberation mapping technique, basis of the mass-luminosity relation in quasars. BLRs are much smaller than the angular resolution of the VLT and Keck interferometer…
▽ More
Unveiling the structure of the Broad Line Region (BLR) of AGNs is critical to understand the quasar phenomenon. Resolving a few BLRs by optical interferometry will bring decisive information to confront, complement and calibrate the reverberation mapping technique, basis of the mass-luminosity relation in quasars. BLRs are much smaller than the angular resolution of the VLT and Keck interferometers and they can be resolved only by differential interferometry very accurate measurements of differential visibility and phase as a function of wavelength. The latter yields the photocenter variation with wavelength, and constrains the size, position and velocity law of various regions of the BLR. AGNs are below the magnitude limit for spectrally resolved interferometry set by currently available fringe trackers. A new "blind" observation method and a data processing based on the accumulation of 2D Fourier power and cross spectra permitted us to obtain the first spectrally resolved interferometric observation of a BLR, on the K=10 quasar 3C273. A careful bias analysis is still in progress, but we report strong evidence that, as the baseline increases, the differential visibility decreases in the Pa-alpha line. Combined with a differential phase smaller than 3 degree, this yields an angular equivalent radius of the BLR larger than 0.4 milliarcseconds, or 1000 light days at the distance of 3C273, much larger than the reverberation mapping radius of 300 light days. Explaining the coexistence of these two different sizes, and possibly structures and mechanisms, implies very new insights into the BLR of 3C273
△ Less
Submitted 12 October, 2014;
originally announced October 2014.
-
PAINTER: a spatio-spectral image reconstruction algorithm for optical interferometry
Authors:
Antony Schutz,
André Ferrari,
David Mary,
Férréol Soulez,
Éric Thiébaut,
Martin Vannier
Abstract:
Astronomical optical interferometers sample the Fourier transform of the intensity distribution of a source at the observation wavelength. Because of rapid perturbations caused by atmospheric turbulence, the phases of the complex Fourier samples (visibilities) cannot be directly exploited. Consequently, specific image reconstruction methods have been devised in the last few decades. Modern polychr…
▽ More
Astronomical optical interferometers sample the Fourier transform of the intensity distribution of a source at the observation wavelength. Because of rapid perturbations caused by atmospheric turbulence, the phases of the complex Fourier samples (visibilities) cannot be directly exploited. Consequently, specific image reconstruction methods have been devised in the last few decades. Modern polychromatic optical interferometric instruments are now paving the way to multiwavelength imaging. This paper is devoted to the derivation of a spatio-spectral (3D) image reconstruction algorithm, coined PAINTER (Polychromatic opticAl INTErferometric Reconstruction software). The algorithm relies on an iterative process, which alternates estimation of polychromatic images and of complex visibilities. The complex visibilities are not only estimated from squared moduli and closure phases, but also differential phases, which helps to better constrain the polychromatic reconstruction. Simulations on synthetic data illustrate the efficiency of the algorithm and in particular the relevance of injecting a differential phases model in the reconstruction.
△ Less
Submitted 27 September, 2014; v1 submitted 29 June, 2014;
originally announced July 2014.
-
Statistical characterization of polychromatic absolute and differential squared visibilities obtained from AMBER/VLTI instrument
Authors:
Antony Schutz,
Martin Vannier,
David Mary,
Andre Ferrari,
Florentin Millour,
Romain Petrov
Abstract:
In optical interferometry, the visibility squared modulus are generally assumed to follow a Gaussian distribution and to be independent of each other. A quantitative analysis of the relevance of such assumptions is important to help improving the exploitation of existing and upcoming multi-wavelength interferometric instruments. Analyze the statistical behaviour of both the absolute and the colour…
▽ More
In optical interferometry, the visibility squared modulus are generally assumed to follow a Gaussian distribution and to be independent of each other. A quantitative analysis of the relevance of such assumptions is important to help improving the exploitation of existing and upcoming multi-wavelength interferometric instruments. Analyze the statistical behaviour of both the absolute and the colour-differential squared visibilities: distribution laws, correlations and cross-correlations between different baselines. We use observations of stellar calibrators obtained with AMBER instrument on VLTI in different instrumental and observing configurations, from which we extract the frame-by-frame transfer function. Statistical hypotheses tests and diagnostics are then systematically applied. For both absolute and differential squared visibilities and under all instrumental and observing conditions, we find a better fit for the Student distribution than for the Gaussian, log-normal and Cauchy distributions. We find and analyze clear correlation effects caused by atmospheric perturbations. The differential squared visibilities allow to keep a larger fraction of data with respect to selected absolute squared visibilities and thus benefit from reduced temporal dispersion, while their distribution is more clearly characterized. The frame selection based on the criterion of a fixed SNR value might result in either a biased sample of frames or in a too severe selection.
△ Less
Submitted 14 May, 2014;
originally announced May 2014.
-
Academic Ranking with Web Mining and Axiomatic Analysis
Authors:
Kun Tang,
Qiwei Jin,
Xin Zou,
Jiansheng Yang,
Michael Vannier,
Ge Wang
Abstract:
Academic ranking is a public topic, such as for universities, colleges, or departments, which has significant educational, administrative and social effects. Popular ranking systems include the US News & World Report (USNWR), the Academic Ranking of World Universities (ARWU), and others. The most popular observables for such ranking are academic publications and their citations. However, a rigorou…
▽ More
Academic ranking is a public topic, such as for universities, colleges, or departments, which has significant educational, administrative and social effects. Popular ranking systems include the US News & World Report (USNWR), the Academic Ranking of World Universities (ARWU), and others. The most popular observables for such ranking are academic publications and their citations. However, a rigorous, quantitative and thorough methodology has been missing for this purpose. With modern web technology and axiomatic bibliometric analysis, here we perform a feasibility study on Microsoft Academic Search metadata and obtain the first-of-its-kind ranking results for American departments of computer science. This approach can be extended for fully automatic intuitional and college ranking based on comprehensive data on Internet.
△ Less
Submitted 26 December, 2012;
originally announced January 2013.
-
Omni-tomography: Next-generation Biomedical Imaging
Authors:
Ge Wang,
Yue Wang,
Michael W. Vannier
Abstract:
Omni-tomography is enabled by interior tomography that has been developed over the past five years. By omni-tomography, we envision that the next stage of biomedical imaging will be the grand fusion of many tomographic modalities into a single gantry (all in one) for simultaneous data acquisition of numerous complementary features (all at once). This integration has great synergistic potential for…
▽ More
Omni-tomography is enabled by interior tomography that has been developed over the past five years. By omni-tomography, we envision that the next stage of biomedical imaging will be the grand fusion of many tomographic modalities into a single gantry (all in one) for simultaneous data acquisition of numerous complementary features (all at once). This integration has great synergistic potential for development of systems biology, personalized and preventive medicine, because many physiological processes are dynamic and complicated, and must be observed promptly, comprehensively, sensitively, specifically, and non-invasively. In this perspective, we first present the background for and power of omni-tomography, then discuss its important applications in vulnerable plaque characterization and intratumor heterogeneity evaluation, review its enabling theory and technology, explain for the first time the feasibility of the CT-MRI scanner as an example, and finally suggest exciting research opportunities.
△ Less
Submitted 21 December, 2012;
originally announced December 2012.
-
The 2012 Interferometric Imaging Beauty Contest
Authors:
Fabien Baron,
William D. Cotton,
Peter R. Lawson,
Steve T. Ridgway,
Alicia Aarnio,
John D. Monnier,
Karl-Heinz Hofmann,
Dieter Schertl,
Gerd Weigelt,
Eric Thiébaut,
Férréol Soulez,
David Mary,
Florentin Millour,
Martin Vannier,
John Young,
Nicholas M. Elias II,
Henrique R. Schmitt,
Sridharan Rengaswamy
Abstract:
We present the results of the fifth Interferometric Imaging Beauty Contest. The contest consists in blind imaging of test data sets derived from model sources and distributed in the OIFITS format. Two scenarios of imaging with CHARA/MIRC-6T were offered for reconstruction: imaging a T Tauri disc and imaging a spotted red supergiant. There were eight different teams competing this time: Monnier wit…
▽ More
We present the results of the fifth Interferometric Imaging Beauty Contest. The contest consists in blind imaging of test data sets derived from model sources and distributed in the OIFITS format. Two scenarios of imaging with CHARA/MIRC-6T were offered for reconstruction: imaging a T Tauri disc and imaging a spotted red supergiant. There were eight different teams competing this time: Monnier with the software package MACIM; Hofmann, Schertl and Weigelt with IRS; Thiébaut and Soulez with MiRA ; Young with BSMEM; Mary and Vannier with MIROIRS; Millour and Vannier with independent BSMEM and MiRA entries; Rengaswamy with an original method; and Elias with the radio-astronomy package CASA. The contest model images, the data delivered to the contestants and the rules are described as well as the results of the image reconstruction obtained by each method. These results are discussed as well as the strengths and limitations of each algorithm.
△ Less
Submitted 1 August, 2012; v1 submitted 30 July, 2012;
originally announced July 2012.
-
Three recipes for improving the image quality with optical long-baseline interferometers: BFMC, LFF, \& DPSC
Authors:
Florentin Millour,
Martin Vannier,
Anthony Meilland
Abstract:
We present here three recipes for getting better images with optical interferometers. Two of them, Low- Frequencies Filling and Brute-Force Monte Carlo were used in our participation to the Interferometry Beauty Contest this year and can be applied to classical imaging using V 2 and closure phases. These two addition to image reconstruction provide a way of having more reliable images. The last re…
▽ More
We present here three recipes for getting better images with optical interferometers. Two of them, Low- Frequencies Filling and Brute-Force Monte Carlo were used in our participation to the Interferometry Beauty Contest this year and can be applied to classical imaging using V 2 and closure phases. These two addition to image reconstruction provide a way of having more reliable images. The last recipe is similar in its principle as the self-calibration technique used in radio-interferometry. We call it also self-calibration, but it uses the wavelength-differential phase as a proxy of the object phase to build-up a full-featured complex visibility set of the observed object. This technique needs a first image-reconstruction run with an available software, using closure-phases and squared visibilities only. We used it for two scientific papers with great success. We discuss here the pros and cons of such imaging technique.
△ Less
Submitted 19 July, 2012;
originally announced July 2012.
-
Revealing the inner circumstellar disk of the T Tauri star S CrA N using the VLTI
Authors:
J. Vural,
A. Kreplin,
S. Kraus,
G. Weigelt,
T. Driebe,
M. Benisty,
M. Dugué,
F. Massi,
J. -L. Monin,
M. Vannier
Abstract:
Aims: We investigate the structure of the circumstellar disk of the T Tauri star S CrA N and test whether the observations agree with the standard picture proposed for Herbig Ae stars.
Methods: Our observations were carried out with the VLTI/AMBER instrument in the H and K bands with the low spectral resolution mode. For the interpretation of our near-infrared AMBER and archival mid-infrared MID…
▽ More
Aims: We investigate the structure of the circumstellar disk of the T Tauri star S CrA N and test whether the observations agree with the standard picture proposed for Herbig Ae stars.
Methods: Our observations were carried out with the VLTI/AMBER instrument in the H and K bands with the low spectral resolution mode. For the interpretation of our near-infrared AMBER and archival mid-infrared MIDI visibilities, we employed both geometric and temperature-gradient models.
Results: To characterize the disk size, we first fitted geometric models consisting of a stellar point source, a ring-shaped disk, and a halo structure to the visibilities. In the H and K bands, we measured ring-fit radii of 0.73 +- 0.03 mas (corresponding to 0.095 +- 0.018 AU for a distance of 130 pc) and 0.85 +- 0.07 mas (0.111 +- 0.026 AU), respectively. This K-band radius is approximately two times larger than the dust sublimation radius of ~0.05 AU expected for a dust sublimation temperature of 1500 K and gray dust opacities, but approximately agrees with the prediction of models including backwarming (namely a radius of ~0.12 AU). The derived temperature-gradient models suggest that the disk is approximately face-on consisting of two disk components with a gap between star and disk. The inner disk component has a temperature close to the dust sublimation temperature and a quite narrow intensity distribution with a radial extension from 0.11 AU to 0.14 AU.
Conclusions: Both our geometric and temperature-gradient models suggest that the T Tauri star S CrA N is surrounded by a circumstellar disk that is truncated at an inner radius of ~0.11 AU. The narrow extension of the inner temperature-gradient disk component implies that there is a hot inner rim.
△ Less
Submitted 10 July, 2012;
originally announced July 2012.
-
VLTI/AMBER observations of the Seyfert nucleus of NGC 3783
Authors:
G. Weigelt,
K. -H. Hofmann,
M. Kishimoto,
S. Hönig,
D. Schertl,
A. Marconi,
F. Millour,
R. Petrov,
D. Fraix-Burnet,
F. Malbet,
K. Tristram,
M. Vannier
Abstract:
Context. The putative tori surrounding the accretion disks of active galactic nuclei (AGNs) play a fundamental role in the unification scheme of AGNs. Infrared long-baseline interferometry allows us to study the inner dust distribution in AGNs with unprecedented spatial resolution over a wide infrared wavelength range.
Aims. Near- and mid-infrared interferometry is used to investigate the milli-…
▽ More
Context. The putative tori surrounding the accretion disks of active galactic nuclei (AGNs) play a fundamental role in the unification scheme of AGNs. Infrared long-baseline interferometry allows us to study the inner dust distribution in AGNs with unprecedented spatial resolution over a wide infrared wavelength range.
Aims. Near- and mid-infrared interferometry is used to investigate the milli-arcsecond-scale dust distribution in the type 1.5 Seyfert nucleus of NGC 3783.
Methods. We observed NGC 3783 with the VLTI/AMBER instrument in the K-band and compared our observations with models.
Results. From the K-band observations, we derive a ring-fit torus radius of 0.74 +/- 0.23 mas or 0.16 +/- 0.05 pc. We compare this size with infrared interferometric observations of other AGNs and UV/optical-infrared reverberation measurements. For the interpretation of our observations, we simultaneously model our near- and mid-infrared visibilities and the SED with a temperature/density-gradient model including an additional inner hot 1400 K ring component.
△ Less
Submitted 27 April, 2012;
originally announced April 2012.
-
Scientific Productivity, Research Funding, Race and Ethnicity
Authors:
J. S. Yang,
M. W. Vannier,
F. Wang,
Y. Deng,
F. R. Ou,
J. R. Bennett,
Y. Liu,
G. Wang
Abstract:
In a recent study by Ginther et al., the probability of receiving a U.S. National Institutes of Health (NIH) RO1 award was related to the applicant's race/ethnicity. The results indicate black/African-American applicants were 10% less likely than white peers to receive an award, after controlling for background and qualifications. It has generated a widespread debate regarding the unfairness of th…
▽ More
In a recent study by Ginther et al., the probability of receiving a U.S. National Institutes of Health (NIH) RO1 award was related to the applicant's race/ethnicity. The results indicate black/African-American applicants were 10% less likely than white peers to receive an award, after controlling for background and qualifications. It has generated a widespread debate regarding the unfairness of the NIH grant review process and its correction. In this paper, the work by Ginther et al. was augmented by pairing analysis, axiomatically-individualized productivity and normalized funding success measurement. Although there are racial differences in R01 grant success rates, normalized figures of merit for funding success explain the discrepancy. The suggested "leverage points for policy intervention" are in question and require deeper and more thorough investigations. Further adjustments in policies to remove racial disparity should be made more systematically for equal opportunity, rather than being limited to the NIH review process.
△ Less
Submitted 16 December, 2011;
originally announced December 2011.
-
A low optical depth region in the inner disk of the HerbigAe star HR5999
Authors:
M. Benisty,
S. Renard,
A. Natta,
J. P. Berger,
F. Massi,
F. Malbet,
P. J. V. Garcia,
A. Isella,
A. Mérand,
J. L. Monin,
L. Testi,
E. Thiébaut,
M. Vannier,
G. Weigelt
Abstract:
Circumstellar disks surrounding young stars are known to be the birthplaces of planets, and the innermost astronomical unit is of particular interest. We present new long-baseline spectro-interferometric observations of the HerbigAe star, HR5999, obtained in the H and K bands with the AMBER instrument at the VLTI, and aim to produce near-infrared images at the sub-AU spatial scale. We spatially re…
▽ More
Circumstellar disks surrounding young stars are known to be the birthplaces of planets, and the innermost astronomical unit is of particular interest. We present new long-baseline spectro-interferometric observations of the HerbigAe star, HR5999, obtained in the H and K bands with the AMBER instrument at the VLTI, and aim to produce near-infrared images at the sub-AU spatial scale. We spatially resolve the circumstellar material and reconstruct images using the MiRA algorithm. In addition, we interpret the interferometric observations using models that assume that the near-infrared excess is dominated by the emission of a circumstellar disk. We compare the images reconstructed from the VLTI measurements to images obtained using simulated model data. The K-band image reveals three main elements: a ring-like feature located at ~0.65 AU, a low surface brightness region inside, and a central spot. At the maximum angular resolution of our observations (1.3 mas), the ring is resolved while the central spot is only marginally resolved, preventing us from revealing the exact morphology of the circumstellar environment. We suggest that the ring traces silicate condensation, i.e., an opacity change, in a circumstellar disk around HR 5999. We build a model that includes a ring at the silicate sublimation radius and an inner disk of low surface brightness responsible for a large amount of the near-infrared continuum emission. The model successfully fits the SED, visibilities, and closure phases, and provides evidence of a low surface brightness region inside the silicate sublimation radius. This study provides additional evidence that in HerbigAe stars, there is material in a low surface brightness region, probably a low optical depth region, located inside the silicate sublimation radius and of unknown nature.
△ Less
Submitted 21 June, 2011;
originally announced June 2011.
-
The nearby eclipsing stellar system delta Velorum III. Self-consistent fundamental parameters and distance
Authors:
A. Merand,
P. Kervella,
T. Pribulla,
M. G. Petr-Gotzens,
M. Benisty,
A. Natta,
G. Duvert,
D. Schertl,
M. Vannier
Abstract:
The triple stellar system delta Vel (composed of two A-type and one F-type main sequence stars) is particularly interesting as it contains one of the nearest and brightest eclipsing binaries. It therefore presents a unique opportunity to determine independently the physical properties of the three components of the system, as well as its distance. We aim at determining the fundamental parameters (…
▽ More
The triple stellar system delta Vel (composed of two A-type and one F-type main sequence stars) is particularly interesting as it contains one of the nearest and brightest eclipsing binaries. It therefore presents a unique opportunity to determine independently the physical properties of the three components of the system, as well as its distance. We aim at determining the fundamental parameters (masses, radii, luminosities, rotational velocities) of the three components of delta Vel, as well as the parallax of the system, independently from the existing Hipparcos} measurement. We determined dynamical masses from high-precision astrometry of the orbits of Aab-B and Aa-Ab using adaptive optics (VLT/NACO) and optical interferometry (VLTI/AMBER). The main component is an eclipsing binary composed of two early A-type stars in rapid rotation. We modeled the photometric and radial velocity measurements of the eclipsing pair Aa-Ab using a self consistent method based on physical parameters (mass, radius, luminosity, rotational velocity). From our self-consistent modeling of the primary and secondary components of the delta Vel A eclipsing pair, we derive their fundamental parameters with a typical accuracy of 1%. We find that they have similar masses, respectively 2.43+/-0.02Msol and 2.27+/-0.02Msol. The physical parameters of the tertiary component (delta Vel B) are also estimated, although to a lower accuracy. We obtain a parallax of 39.8+/-0.4mas for the system, in satisfactory agreement (-1.2 sigma) with the Hipparcos value (40.5+/-0.4mas). The physical parameters we derive represent a consistent set of constraints for the evolutionary modeling of this system. The agreement of the parallax we measure with the Hipparcos value to a 1% accuracy is also an interesting confirmation of the true accuracy of these two independent measurements.
△ Less
Submitted 13 June, 2011;
originally announced June 2011.
-
Omni-tomography/Multi-tomography -- Integrating Multiple Modalities for Simultaneous Imaging
Authors:
Ge Wang,
Jie Zhang,
Hao Gao,
Victor Weir,
Hengyong Yu,
Wenxiang Cong,
Xiaochen Xu,
Haiou Shen,
James Bennett,
Yue Wang,
Michael Vannier
Abstract:
Current tomographic imaging systems need major improvements, especially when multi-dimensional, multi-scale, multi-temporal and multi-parametric phenomena are under investigation. Both preclinical and clinical imaging now depend on in vivo tomography, often requiring separate evaluations by different imaging modalities to define morphologic details, delineate interval changes due to disease or int…
▽ More
Current tomographic imaging systems need major improvements, especially when multi-dimensional, multi-scale, multi-temporal and multi-parametric phenomena are under investigation. Both preclinical and clinical imaging now depend on in vivo tomography, often requiring separate evaluations by different imaging modalities to define morphologic details, delineate interval changes due to disease or interventions, and study physiological functions that have interconnected aspects. Over the past decade, fusion of multimodality images has emerged with two different approaches: post-hoc image registration and combined acquisition on PET-CT, PET-MRI and other hybrid scanners. There are intrinsic limitations for both the post-hoc image analysis and dual/triple modality approaches defined by registration errors and physical constraints in the acquisition chain. We envision that tomography will evolve beyond current modality fusion and towards grand fusion, a large scale fusion of all or many imaging modalities, which may be referred to as omni-tomography or multi-tomography. Unlike modality fusion, grand fusion is here proposed for truly simultaneous but often localized reconstruction in terms of all or many relevant imaging mechanisms such as CT, MRI, PET, SPECT, US, optical, and possibly more. In this paper, the technical basis for omni-tomography is introduced and illustrated with a top-level design of a next generation scanner, interior tomographic reconstructions of representative modalities, and anticipated applications of omni-tomography.
△ Less
Submitted 10 June, 2011;
originally announced June 2011.
-
Possible detection of phase changes from the non-transiting planet HD 46375b by CoRoT
Authors:
P. Gaulme,
M. Vannier,
T. Guillot,
B. Mosser,
D. Mary,
W. W. Weiss,
F. -X. Schmider,
S. Bourguignon,
H. J. Deeg,
C. Régulo,
S. Aigrain,
J. Schneider,
H. Bruntt,
S. Deheuvels,
J. -F. Donati,
T. Appourchaux,
M. Auvergne,
A. Baglin,
F. Baudin,
C. Catala,
E. Michel,
R. Samadi
Abstract:
The present work deals with the detection of phase changes in an exoplanetary system. HD 46375 is a solar analog known to host a non-transiting Saturn-mass exoplanet with a 3.0236 day period. It was observed by the CoRoT satellite for 34 days during the fall of 2008. We attempt to identify at optical wavelengths, the changing phases of the planet as it orbits its star. We then try to improve the s…
▽ More
The present work deals with the detection of phase changes in an exoplanetary system. HD 46375 is a solar analog known to host a non-transiting Saturn-mass exoplanet with a 3.0236 day period. It was observed by the CoRoT satellite for 34 days during the fall of 2008. We attempt to identify at optical wavelengths, the changing phases of the planet as it orbits its star. We then try to improve the star model by means of a seismic analysis of the same light curve and the use of ground-based spectropolarimetric observations. The data analysis relies on the Fourier spectrum and the folding of the time series. We find evidence of a sinusoidal signal compatible in terms of both amplitude and phase with light reflected by the planet. Its relative amplitude is Delta Fp/F* = [13.0, 26.8] ppm, implying an albedo A=[0.16, 0.33] or a dayside visible brightness temperature Tb ~ [1880,2030] K by assuming a radius R=1.1 R_Jup and an inclination i=45 deg. Its orbital phase differs from that of the radial-velocity signal by at most 2 sigma_RV. However, the tiny planetary signal is strongly blended by another signal, which we attribute to a telluric signal with a 1 day period. We show that this signal is suppressed, but not eliminated, when using the time series for HD 46179 from the same CoRoT run as a reference. This detection of reflected light from a non-transiting planet should be confirmable with a longer CoRoT observation of the same field. In any case, it demonstrates that non-transiting planets can be characterized using ultra-precise photometric lightcurves with present-day observations by CoRoT and Kepler. The combined detection of solar-type oscillations on the same targets (Gaulme et al. 2010a) highlights the overlap between exoplanetary science and asteroseismology and shows the high potential of a mission such as Plato.
△ Less
Submitted 11 November, 2010;
originally announced November 2010.
-
HD 46375: seismic and spectropolarimetric analysis of a young Sun hosting a Saturn-like planet
Authors:
P. Gaulme,
S. Deheuvels,
W. W. Weiss,
B. Mosser,
C. Moutou,
H. Bruntt,
J. -F. Donati,
M. Vannier,
T. Guillot,
T. Appourchaux,
E. Michel,
M. Auvergne,
R. Samadi,
F. Baudin,
C. Catala,
A. Baglin
Abstract:
HD 46375 is known to host a Saturn-like exoplanet orbiting at 0.04 AU from its host star. Stellar light reflected by the planet was tentatively identified in the 34-day CoRoT run acquired in October-November 2008. We constrain the properties of the magnetic field of HD 46375 based on spectropolarimetric observations with the NARVAL spectrograph at the Pic du Midi observatory. In addition, we use a…
▽ More
HD 46375 is known to host a Saturn-like exoplanet orbiting at 0.04 AU from its host star. Stellar light reflected by the planet was tentatively identified in the 34-day CoRoT run acquired in October-November 2008. We constrain the properties of the magnetic field of HD 46375 based on spectropolarimetric observations with the NARVAL spectrograph at the Pic du Midi observatory. In addition, we use a high-resolution NARVAL flux spectrum to contrain the atmospheric parameters. With these constraints, we perform an asteroseismic analysis and modelling of HD 46375 using the frequencies extracted from the CoRoT light curve. We used Zeeman Doppler imaging to reconstruct the magnetic map of the stellar surface. In the spectroscopic analysis we fitted isolated lines using 1D LTE atmosphere models. This analysis was used to constrain the effective temperature, surface gravity, and chemical composition of the star. To extract information about the p-mode oscillations, we used a technique based on the envelope autocorrelation function (EACF). From the Zeeman Doppler imaging observations, we observe a magnetic field of ~5 gauss. From the spectral analysis, HD 46375 is inferred to be an unevolved K0 type star with high metallicity [Fe/H]=+0.39. Owing to the relative faintness of the star (m_hip=8.05), the signal-to-noise ratio is too low to identify individual modes. However, we measure the p-mode excess power and large separation Delta nu_0=153.0 +/- 0.7 muHz. We are able do constrain the fundamental parameters of the star thanks to spectrometric and seismic analyses. We conclude that HD 46375 is similar to a young version of Alpha-CenB. This work is of special interest because of its combination of exoplanetary science and asteroseismology, which are the subjects of the current Kepler mission and the proposed PLATO mission.
△ Less
Submitted 11 November, 2010;
originally announced November 2010.
-
The 2010 Interferometric Imaging Beauty Contest
Authors:
Fabien Malbet,
William Cotton,
Gilles Duvert,
Peter Lawson,
Andrea Chiavassa,
John Young,
Fabien Baron,
David Buscher,
Sridharan Rengaswamy,
Brian Kloppenborg,
Martin Vannier,
Laurent Mugnier
Abstract:
We present the results of the fourth Optical/IR Interferometry Imaging Beauty Contest. The contest consists of blind imaging of test data sets derived from model sources and distributed in the OI-FITS format. The test data consists of spectral data sets on an object "observed" in the infrared with spectral resolution. There were 4 different algorithms competing this time: BSMEM the Bispectrum Maxi…
▽ More
We present the results of the fourth Optical/IR Interferometry Imaging Beauty Contest. The contest consists of blind imaging of test data sets derived from model sources and distributed in the OI-FITS format. The test data consists of spectral data sets on an object "observed" in the infrared with spectral resolution. There were 4 different algorithms competing this time: BSMEM the Bispectrum Maximum Entropy Method by Young, Baron & Buscher; RPR the Recursive Phase Reconstruction by Rengaswamy; SQUEEZE a Markov Chain Monte Carlo algorithm by Baron, Monnier & Kloppenborg; and, WISARD the Weak-phase Interferometric Sample Alternating Reconstruction Device by Vannier & Mugnier. The contest model image, the data delivered to the contestants and the rules are described as well as the results of the image reconstruction obtained by each method. These results are discussed as well as the strengths and limitations of each algorithm.
△ Less
Submitted 26 July, 2010;
originally announced July 2010.
-
Strong near-infrared emission in the sub-AU disk of the Herbig Ae star HD163296: evidence for refractory dust?
Authors:
M. Benisty,
A. Natta,
A. Isella,
J-P. Berger,
F. Massi,
J-B. LeBouquin,
A. Merand,
G. Duvert,
S. Kraus,
F. Malbet,
J. Olofsson,
S. Robbe-Dubois,
L. Testi,
M. Vannier,
G. Weigelt
Abstract:
We present new long-baseline spectro-interferometric observations of the HerbigAe star HD163296 obtained in the H and K bands with the AMBER instrument at VLTI. The observations cover a range of spatial resolutions between 3 and 12 milli-arcseconds, with a spectral resolution of ~30. With a total of 1481 visibilities and 432 closure phases, they result in the best (u,v) coverage achieved on a yo…
▽ More
We present new long-baseline spectro-interferometric observations of the HerbigAe star HD163296 obtained in the H and K bands with the AMBER instrument at VLTI. The observations cover a range of spatial resolutions between 3 and 12 milli-arcseconds, with a spectral resolution of ~30. With a total of 1481 visibilities and 432 closure phases, they result in the best (u,v) coverage achieved on a young star so far. The circumstellar material is resolved at the sub-AU spatial scale and closure phase measurements indicate a small but significant deviation from point-symmetry. We discuss the results assuming that the near-infrared excess in HD163296 is dominated by the emission of a circumstellar disk. A successful fit to the spectral energy distribution, near-infrared visibilities and closure phases is found with a model where a dominant contribution to the H and K band emissions arises from an optically thin, smooth and point-symmetric region extending from about 0.1 to 0.45 AU. At the latter distance from the star, silicates condense, the disk becomes optically thick and develops a puffed-up rim, whose skewed emission can account for the non-zero closure phases. We discuss the nature of the inner disk emission and tentatively rule out dense molecular gas as well as optically thin atomic or ionized gas as its possible origin. We propose instead that the inner emission traces the presence of very refractory grains in a partially cleared region, extending at least to 0.5 AU. If so, we may be observing the disk of HD163296 just before it reaches the transition disk phase. However, we note that the nature of the refractory grains or even the possibility for any grain to survive at the very high temperatures we require (~2100-2300 K at 0.1 AU from the star) is unclear and should be investigated further.
△ Less
Submitted 7 December, 2009; v1 submitted 23 November, 2009;
originally announced November 2009.
-
Study of the atmospheric refraction in a single mode instrument - Application to AMBER/VLTI
Authors:
Sylvie Robbe-Dubois,
Stephane Lagarde,
Yves Bresson,
Romain G. Petrov,
Marcel Carbillet,
Etienne Lecoarer,
Frederik Rantakyrö,
Isabelle Tallon-Bosc,
Martin Vannier,
Pierre Antonelli,
Gregoire Martinot-Lagarde,
Alain Roussel,
Daniel Tasso
Abstract:
This paper presents a study of the atmospheric refraction and its effect on the light coupling efficiency in an instrument using single-mode optical fibers. We show the analytical approach which allowed us to assess the need to correct the refraction in J- and H-bands while observing with an 8-m Unit Telescope. We then developed numerical simulations to go further in calculations. The hypotheses…
▽ More
This paper presents a study of the atmospheric refraction and its effect on the light coupling efficiency in an instrument using single-mode optical fibers. We show the analytical approach which allowed us to assess the need to correct the refraction in J- and H-bands while observing with an 8-m Unit Telescope. We then developed numerical simulations to go further in calculations. The hypotheses on the instrumental characteristics are those of AMBER (Astronomical Multi BEam combineR), the near infrared focal beam combiner of the Very Large Telescope Interferometric mode (VLTI), but most of the conclusions can be generalized to other single-mode instruments. We used the software package caos (Code for Adaptive Optics Systems) to take into account the atmospheric turbulence effect after correction by the ESO system MACAO (Multi-Application Curvature Adaptive Optics). The opto-mechanical study and design of the system correcting the atmospheric refraction on AMBER is then detailed. We showed that the atmospheric refraction becomes predominant over the atmospheric turbulence for some zenith angles z and spectral conditions: for z larger than 30{\circ} in J-band for example. The study of the optical system showed that it allows to achieve the required instrumental performance in terms of throughput in J- and H-bands. First observations in J-band of a bright star, alpha Cir star, at more than 30{\circ} from zenith clearly showed the gain to control the atmospheric refraction in a single mode instrument, and validated the operating law.
△ Less
Submitted 12 February, 2009;
originally announced February 2009.
-
Optical configuration and analysis of the AMBER/VLTI instrument
Authors:
S. Robbe-Dubois,
S. Lagarde,
R. G. Petrov,
F. Lisi,
U. Beckmann,
P. Antonelli,
Y. Bresson,
G. Martinot-Lagarde,
A. Roussel,
P. Salinari,
M. Vannier,
A. Chelli,
M. Dugue,
G. Duvert,
S. Gennari,
L. Gluck,
P. Kern,
E. LeCoarer,
F. Malbet,
F. Millour,
K. Perraut,
P. Puget,
F. Rantakyro,
E. Tatulli,
G. Weigelt
, et al. (1 additional authors not shown)
Abstract:
This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance.
On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the i…
▽ More
This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance.
On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the instrument. We established a budget for transmission and contrast degradation through the different modules, and made the detailed optical design. The latter confirmed the overall performance of the instrument and defined the exact implementation of the AMBER optics.
The performance was assessed with laboratory measurements and commissionings at the VLTI, in terms of spectral coverage and resolution, instrumental contrast higher than 0.80, minimum magnitude of 11 in K, absolute visibility accuracy of 1%, and differential phase stability of 1E-3 rad over one minute.
△ Less
Submitted 23 July, 2008;
originally announced July 2008.
-
"Advanced" data reduction for the AMBER instrument
Authors:
Florentin Millour,
Bruno Valat,
Romain Petrov,
Martin Vannier
Abstract:
The amdlib AMBER data reduction software is meant to produce AMBER data products from the raw data files that are sent to the PIs of different proposals or that can be found in the ESO data archive. The way defined by ESO to calibrate the data is to calibrate one science data file with a calibration one, observed as close in time as possible. Therefore, this scheme does not take into account ins…
▽ More
The amdlib AMBER data reduction software is meant to produce AMBER data products from the raw data files that are sent to the PIs of different proposals or that can be found in the ESO data archive. The way defined by ESO to calibrate the data is to calibrate one science data file with a calibration one, observed as close in time as possible. Therefore, this scheme does not take into account instrumental drifts, atmospheric variations or visibility-loss corrections, in the current AMBER data processing software, amdlib. In this article, we present our approach to complement this default calibration scheme, to perform the final steps of data reduction, and to produce fully calibrated AMBER data products. These additional steps include: an overnight view of the data structure and data quality, the production of night transfer functions from the calibration stars observed during the night, the correction of additional effects not taken into account in the standard AMBER data reduction software such as the so-called "jitter" effect and the visibility spectral coherence loss, and finally, the production of fully calibrated data products. All these new features are beeing implemented in the modular pipeline script amdlibPipeline, written to complement the amdlib software.
△ Less
Submitted 2 July, 2008;
originally announced July 2008.
-
AMBER closure and differential phases: accuracy and calibration with a Beam Commutation
Authors:
Florentin Millour,
Romain Petrov,
Martin Vannier,
Stefan Kraus
Abstract:
The first astrophysical results of the VLTI focal instrument AMBER have shown the importance of the differential and closure phase measures, which are supposed to be much less sensitive to atmospheric and instrumental biases than the absolute visibility. However there are artifacts limiting the accuracy of these measures which can be substantially overcome by a specific calibration technique cal…
▽ More
The first astrophysical results of the VLTI focal instrument AMBER have shown the importance of the differential and closure phase measures, which are supposed to be much less sensitive to atmospheric and instrumental biases than the absolute visibility. However there are artifacts limiting the accuracy of these measures which can be substantially overcome by a specific calibration technique called Beam Commutation. This paper reports the observed accuracies on AMBER/VLTI phases in different modes, discusses some of the instrumental biases and shows the accuracy gain provided by Beam Commutation on the Differential Phase as well as on the Closure Phase.
△ Less
Submitted 2 July, 2008; v1 submitted 30 June, 2008;
originally announced June 2008.
-
AMBER on the VLTI: data processing and calibration issues
Authors:
Florentin Millour,
Romain Petrov,
Fabien Malbet,
Eric Tatulli,
Gilles Duvert,
Gérard Zins,
Evelyne Altariba,
Martin Vannier,
Oscar Hernandez,
Gianluca Li Causi
Abstract:
We present here the current performances of the AMBER / VLTI instrument for standard use and compare these with the offered modes of the instrument. We show that the instrument is able to reach its specified precision only for medium and high spectral resolution modes, differential observables and bright objects. For absolute observables, the current achievable accuracy is strongly limited by th…
▽ More
We present here the current performances of the AMBER / VLTI instrument for standard use and compare these with the offered modes of the instrument. We show that the instrument is able to reach its specified precision only for medium and high spectral resolution modes, differential observables and bright objects. For absolute observables, the current achievable accuracy is strongly limited by the vibrations of the Unit Telescopes, and also by the observing procedure which does not take into account the night-long transfer function monitoring. For low-resolution mode, the current limitation is more in the data reduction side, since several effects negligible at medium spectral resolution are not taken into account in the current pipeline. Finally, for faint objects (SNR around 1 per spectral channel), electromagnetic interferences in the VLTI interferometric laboratory with the detector electronics prevents currently to get unbiased measurements. Ideas are under study to correct in the data processing side this effect, but a hardware fix should be investigated seriously since it limits seriously the effective limiting magnitude of the instrument.
△ Less
Submitted 11 May, 2007;
originally announced May 2007.
-
A compact dust shell in the symbiotic system HM Sge
Authors:
Stéphane Sacuto,
Olivier Chesneau,
Martin Vannier,
Pierre Cruzalèbes
Abstract:
We present high spatial resolution observations of the mid-infrared core of the dusty symbiotic system HM Sge. The MIDI interferometer was used with the VLT UTs and ATs providing baselines oriented from PA=42° to 105°. The MIDI visibilities are compared with the ones predicted in the frame of various spherical dust shells published in the literature involving single or double dusty shell…
▽ More
We present high spatial resolution observations of the mid-infrared core of the dusty symbiotic system HM Sge. The MIDI interferometer was used with the VLT UTs and ATs providing baselines oriented from PA=42° to 105°. The MIDI visibilities are compared with the ones predicted in the frame of various spherical dust shells published in the literature involving single or double dusty shells. The mid-IR environment is unresolved by a 8m telescope and the MIDI spectrum exhibits a level similar to the ISO spectra recorded 10 yr ago. The estimated Gaussian HWHM of the shell of 12AU in the 8-9$μ$m range, and 18AU in the 11-12$μ$m range, are much smaller than the angular separation between the Mira and the White Dwarf of 60AU. The discrepancies between the HWHM at different angle orientations suggest an increasing level of asymmetry from 13 to 8$μ$m. The observations are well fitted by the densest and smallest model published in the literature based on the ISO data, although such a model does not account for the variations of near-IR photometry due to the Mira pulsation cycle suggesting a much smaller optical thickness. These observations also discard the two shells models, developed to take into account the effect of the WD illumination onto the dusty wind of the Mira. These observations show that a high rate of dust formation is occurring in the vicinity of the Mira which seems to be not highly perturbed by the hot companion.
△ Less
Submitted 14 February, 2007;
originally announced February 2007.
-
VLTI/AMBER interferometric observations of the recurrent Nova RS Oph 5.5 days after outburst
Authors:
Olivier Chesneau,
N. Nardetto,
F. Millour,
Ch. Hummel,
A. Domiciano De Souza,
D. Bonneau,
M. Vannier,
F. T. Rantakyro,
A. Spang,
F. Malbet,
D. Mourard,
M. F. Bode,
T. J. O'brien,
G. Skinner,
R. Petrov,
Ph. Stee,
E. Tatulli,
F. Vakili
Abstract:
We report on interferometric AMBER/VLTI observations of the recurrent nova RS Oph five days after its outburst on 2006 Feb 12. Using three baselines from 44 to 86m, and a spectral resolution of 1500, we measured the extension of the emission in the K band continuum and in the BrG and HeI2.06 micron lines. The continuum visibilities were interpreted by fitting simple geometric models consisting o…
▽ More
We report on interferometric AMBER/VLTI observations of the recurrent nova RS Oph five days after its outburst on 2006 Feb 12. Using three baselines from 44 to 86m, and a spectral resolution of 1500, we measured the extension of the emission in the K band continuum and in the BrG and HeI2.06 micron lines. The continuum visibilities were interpreted by fitting simple geometric models consisting of uniform and Gaussian ellipses, ring and binary models. The visibilities and differential phases in the BrG line were interpreted using skewed ring models aiming to perform a limited parametric reconstruction of the extension and kinematics of the line forming region. The limited uv coverage does not allow discrimination between filled models and rings. Binary models are discarded because the measured closure phase in the continuum is close to zero. The visibilities in the lines are at a low level compared to their nearby continuum, consistent with a more extended line forming region for HeI2.06 than BrG. The ellipse models for the continuum and for the lines are highly flattened and share the same position angle. Two radial velocity fields are apparent in the BrG line: a 'slow' expanding ring-like structure (v~1800km/s), and a 'fast' structure extended in the E-W direction (v~2500-3000km/s). These results confirm the basic fireball model, contrary to the conclusions of other interferometric observations conducted by Monnier et al. (2006).
△ Less
Submitted 19 November, 2006;
originally announced November 2006.
-
Direct constraint on the distance of y2 Velorum from AMBER/VLTI observations
Authors:
F. Millour,
R. G. Petrov,
O. Chesneau,
D. Bonneau,
L. Dessart,
C. Bechet,
I. Tallon-Bosc,
M. Tallon,
E. Thiébaut,
F. Vakili,
F. Malbet,
D. Mourard,
G. Zins,
A. Roussel,
S. Robbe-Dubois,
P. Puget,
K. Perraut,
F. Lisi,
E. Le Coarer,
S. Lagarde,
P. Kern,
L. Glück,
G. Duvert,
A. Chelli,
Y. Bresson
, et al. (73 additional authors not shown)
Abstract:
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret thes…
▽ More
In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1±0.9mas and 66±15° respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11°. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc.
△ Less
Submitted 31 October, 2006;
originally announced October 2006.
-
First direct detection of a Keplerian rotating disk around the Be star $α$ Arae using the VLTI/AMBER instrument
Authors:
Anthony Meilland,
Philippe Stee,
Martin Vannier,
Florentin Millour,
Armando Domiciano De Souza,
Fabien Malbet,
Christophe Martayan,
Francesco Paresce,
Romain Petrov,
Andrea Richichi,
Alain Spang,
the AMBER Consortium Collaboration
Abstract:
Aims. We aim to study the geometry and kinematics of the disk around the Be star $α$ Arae as a function of wavelength, especially across the Br$γ$ emission line. The main purpose of this paper is to answer the question about the nature of the disk rotation around Be stars. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a gain by a factor 5 in spatial resolution…
▽ More
Aims. We aim to study the geometry and kinematics of the disk around the Be star $α$ Arae as a function of wavelength, especially across the Br$γ$ emission line. The main purpose of this paper is to answer the question about the nature of the disk rotation around Be stars. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a gain by a factor 5 in spatial resolution compared to previous VLTI/MIDI observations. Moreover, it is possible to combine the high angular resolution provided with the (medium) spectral resolution of AMBER to study the kinematics of the inner part of the disk and to infer its rotation law. Results. We obtain for the first time the direct evidence that the disk is in keplerian rotation, answering a question that occurs since the discovery of the first Be star $γ$ Cas by father Secchi in 1866. We also present the global geometry of the disk showing that it is compatible with a thin disk + polar enhanced winds modeled with the SIMECA code. We found that the disk around $α$ Arae is compatible with a dense equatorial matter confined in the central region whereas a polar wind is contributing along the rotational axis of the central star. Between these two regions the density must be low enough to reproduce the large visibility modulus (small extension) obtained for two of the four VLTI baselines. Moreover, we obtain that $α$ Arae is rotating very close to its critical rotation. This scenario is also compatible with the previous MIDI measurements.
△ Less
Submitted 16 June, 2006;
originally announced June 2006.
-
Study of the scientific potential of a three 40 cm Telescopes Interferometer at Dome C
Authors:
B. Valat,
F. X. Schmider,
B. Lopez,
R. Petrov,
M. Vannier,
F. Millour,
F. Vakili
Abstract:
Recent site testing (see: http://www-luan.unice.fr/Concordiastro/indexantartic.html) has shown that Dome C in Antarctica might have a high potential for stellar interferometry if some solutions related to the surface atmospheric layer are found. A demonstrator interferometer could be envisioned in order to fully qualify the site and prepare the future development of a large array.
We analyse t…
▽ More
Recent site testing (see: http://www-luan.unice.fr/Concordiastro/indexantartic.html) has shown that Dome C in Antarctica might have a high potential for stellar interferometry if some solutions related to the surface atmospheric layer are found. A demonstrator interferometer could be envisioned in order to fully qualify the site and prepare the future development of a large array.
We analyse the performances of a prototype interferometer for Dome C made with 3 telescopes of 40 cm diameter. It assumes classical Michelson recombination. The most recent atmospheric and environmental conditions measured at Dome C are considered (see K. Agabi "First whole atmosphere night-time seeing measurements at Dome C, Antarctica"). We also study the possible science reachable with such a demonstrator. Especially we evaluate that even such small aperture interferometer could allow the detection and low resolution spectroscopy of the most favourable pegaside planets.
△ Less
Submitted 15 June, 2006;
originally announced June 2006.
-
Extrasolar Planets with AMBER/VLTI, What can we expect from current performances ?
Authors:
Florentin Millour,
Martin Vannier,
R. G. Petrov,
Bruno Lopez,
Frederik Rantakiro
Abstract:
We present the current performances of the AMBER / VLTI instrument in terms of differential observables (differential phase and differential visibility) and show that we are already able to reach a sufficient precision for very low mass companions spectroscopy and mass characterization. We perform some extrapolations with the knowledge of the current limitations of the instrument facility. We sh…
▽ More
We present the current performances of the AMBER / VLTI instrument in terms of differential observables (differential phase and differential visibility) and show that we are already able to reach a sufficient precision for very low mass companions spectroscopy and mass characterization. We perform some extrapolations with the knowledge of the current limitations of the instrument facility. We show that with the current setup of the AMBER instrument, we can already reach $3σ= 10^{-3}$ radians and have the potential to some low mass companions characterization (Brown dwarves or hypothetical very hot Extra Solar Giant Planets). With some upgrades of the VLTI infrastructure, improvements of the instrument calibration and improvements of the observing strategy, we will be able to reach $3σ= 10^{-4}$ radians and will have the potential to perform Extra Solar Giant Planets spectroscopy and mass characterization.
△ Less
Submitted 9 December, 2005;
originally announced December 2005.
-
Direct Detection of Sub-stellar Companions with MIDI
Authors:
Peter Schuller,
Martin Vannier,
Romain Petrov,
Bruno Lopez,
Christoph Leinert,
Thomas Henning,
.
Abstract:
Current detection methods of planetary companions do not allow retrieving their spectral information properties. The method of Differential Interferometry has the potential to complement such information by comparing interferometric observables in various spectral channels. We outline the basic aspects of this method and how it can soon be realised by the Mid-infrared Interferometric instrument…
▽ More
Current detection methods of planetary companions do not allow retrieving their spectral information properties. The method of Differential Interferometry has the potential to complement such information by comparing interferometric observables in various spectral channels. We outline the basic aspects of this method and how it can soon be realised by the Mid-infrared Interferometric instrument (MIDI) at the Very Large Telescope Interferometer (VLTI) observatory. A set of possible candidates for such direct observation has been selected among currently identified planetary companions. Differential Interferometry with MIDI would be complementary to other ground-based programs. The method may also be an alternative for future space-based planetary spectroscopy.
△ Less
Submitted 3 August, 2004;
originally announced August 2004.