-
Laser Printing of Silver and Silver Oxide
Authors:
Jordan M. Adams,
Daniel Heligman,
Ryan O'Dell,
Christine Y. Wang,
Daniel Young
Abstract:
We show that direct laser writing (DLW) in aqueous silver nitrate with a 1030 nm femtosecond (fs) laser results in deposition of a mixture of silver oxide and silver, in contrast to the pure silver deposition previously reported with 780 nm fs DLW. However, adding photoinitiator prevents silver oxide formation in a concentration-dependent manner. As a result, the resistivity of the material can al…
▽ More
We show that direct laser writing (DLW) in aqueous silver nitrate with a 1030 nm femtosecond (fs) laser results in deposition of a mixture of silver oxide and silver, in contrast to the pure silver deposition previously reported with 780 nm fs DLW. However, adding photoinitiator prevents silver oxide formation in a concentration-dependent manner. As a result, the resistivity of the material can also be controlled by photoinitiator concentration with resistivity being reduced from approximately 9e-3 $Ωm$ to 3e-7 $Ωm$. Silver oxide peaks dominate the X-ray diffraction spectra when no photoinitiator is present, while the peaks disappear with photoinitiator concentrations above 0.05wt%. While femtosecond pulses are needed to initiate deposition, a continues-wave laser when well overlapped with the previously written material and supplying enough average power can lead to further printing, suggesting thermal deposition can also occur where the photoinitiator molecule also acts as a general reducing agent that prevents oxide formation. We also compare the surface quality of printed lines for different photoinitiator concentrations and laser printing conditions. A THz polarizer and metamaterial are printed as a demonstration of silver oxide printing.
△ Less
Submitted 3 June, 2024; v1 submitted 15 May, 2024;
originally announced May 2024.
-
Preliminary Exploration on the Low-Pressure Ar-O2 Plasma Generated by Low-Frequency Alternating Current (AC) Power Supply
Authors:
Niaz Wali,
W. W. Xiao,
Q. U. Din,
N. U. Rehman,
C. Y. Wang,
J. T. Ma,
W. J. Zhong,
Q. W. Yang
Abstract:
This study reports a low-frequency alternating current (AC) power supply as a novel approach for generating low-pressure capacitively coupled Ar-O2 plasma, offering advantages in cost, compactness, and operational simplicity, which are crucial for both material science and biological applications. The effectiveness of low-frequency AC-generated plasma against traditional RF systems by examining ke…
▽ More
This study reports a low-frequency alternating current (AC) power supply as a novel approach for generating low-pressure capacitively coupled Ar-O2 plasma, offering advantages in cost, compactness, and operational simplicity, which are crucial for both material science and biological applications. The effectiveness of low-frequency AC-generated plasma against traditional RF systems by examining key plasma parameters such as electron density, electron temperature, and electron energy distribution function (EEDF), are investigated. Experimental results revealed that AC power supply could effectively produce low pressure Ar-O2 plasma with comparable properties to RF systems. Most notably, the AC-generated plasma achieved a significant reduction in bacterial growth, suggesting its potential as a more economical and flexible alternative for enhancing plasma-assisted applications in sterilization and material processing.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Reinforcement Learning Tutor Better Supported Lower Performers in a Math Task
Authors:
Sherry Ruan,
Allen Nie,
William Steenbergen,
Jiayu He,
JQ Zhang,
Meng Guo,
Yao Liu,
Kyle Dang Nguyen,
Catherine Y Wang,
Rui Ying,
James A Landay,
Emma Brunskill
Abstract:
Resource limitations make it hard to provide all students with one of the most effective educational interventions: personalized instruction. Reinforcement learning could be a key tool to reduce the development cost and improve the effectiveness of intelligent tutoring software that aims to provide the right support, at the right time, to a student. Here we illustrate that deep reinforcement learn…
▽ More
Resource limitations make it hard to provide all students with one of the most effective educational interventions: personalized instruction. Reinforcement learning could be a key tool to reduce the development cost and improve the effectiveness of intelligent tutoring software that aims to provide the right support, at the right time, to a student. Here we illustrate that deep reinforcement learning can be used to provide adaptive pedagogical support to students learning about the concept of volume in a narrative storyline software. Using explainable artificial intelligence tools, we extracted interpretable insights about the pedagogical policy learned and demonstrated that the resulting policy had similar performance in a different student population. Most importantly, in both studies, the reinforcement-learning narrative system had the largest benefit for those students with the lowest initial pretest scores, suggesting the opportunity for AI to adapt and provide support for those most in need.
△ Less
Submitted 13 April, 2023; v1 submitted 10 April, 2023;
originally announced April 2023.
-
Meter-scale strong coupling between magnons and photons
Authors:
Jinwei Rao,
C. Y. Wang,
Bimu Yao,
Z. J. Chen,
K. X. Zhao,
Wei Lu
Abstract:
We experimentally realize a meter-scale strong coupling effect between magnons and photons at room temperature, with a coherent coupling of 20 m and a dissipative coupling of 7.6 m. To this end, we integrate a saturable gain into a microwave cavity and then couple this active cavity to a magnon mode via a long coaxial cable. The gain compensates for the cavity dissipation, but preserves the cavity…
▽ More
We experimentally realize a meter-scale strong coupling effect between magnons and photons at room temperature, with a coherent coupling of 20 m and a dissipative coupling of 7.6 m. To this end, we integrate a saturable gain into a microwave cavity and then couple this active cavity to a magnon mode via a long coaxial cable. The gain compensates for the cavity dissipation, but preserves the cavity radiation that mediates the indirect photon-magnon coupling. It thus enables the long-range strong photon-magnon coupling. With full access to traveling waves, we demonstrate a remote control of photon-magnon coupling by modulating the phase and amplitude of traveling waves, rather than reconfiguring subsystems themselves. Our method for realizing long-range strong coupling in cavity magnonics provides a general idea for other physical systems. Our experimental achievements may promote the construction of information networks based on cavity magnonics.
△ Less
Submitted 9 August, 2023; v1 submitted 20 March, 2023;
originally announced March 2023.
-
Control of the magnon-polariton hybridization with a microwave pump
Authors:
C. Zhang,
Jinwei Rao,
C. Y. Wang,
Z. J. Chen,
K. X. Zhao,
Bimu Yao,
Xu-Guang Xu,
Wei Lu
Abstract:
Pump-induced magnon modes (PIMs) are recently discovered elementary excitations in ferrimagnets that offer significant tunability to spin dynamics. Here, we investigate the coupling between a PIM and cavity magnon polaritons (CMPs) by driving a cavity magnonic system away from equilibrium with a microwave pump. In our experiment, the Walker mode simultaneously couples with the PIM and cavity photo…
▽ More
Pump-induced magnon modes (PIMs) are recently discovered elementary excitations in ferrimagnets that offer significant tunability to spin dynamics. Here, we investigate the coupling between a PIM and cavity magnon polaritons (CMPs) by driving a cavity magnonic system away from equilibrium with a microwave pump. In our experiment, the Walker mode simultaneously couples with the PIM and cavity photons and thus combines two strongly coherent coupling processes in a single cavity structure. Such a PIM-CMP hybridization system acquires complementary properties from both the PIM and CMPs, allowing it to be freely manipulated by the magnetic field, the pump power and the pump frequency. These coherent manipulations exhibit unique behaviors beyond the intrinsic properties limited by the material nature and electromagnetic boundary conditions, thereby creating opportunities for extending the control of hybrid devices.
△ Less
Submitted 5 August, 2023; v1 submitted 16 February, 2023;
originally announced February 2023.
-
Unveiling a Pump-Induced Magnon Mode via its Strong Interaction with Walker Modes
Authors:
J. W. Rao,
Bimu Yao,
C. Y. Wang,
C. Zhang,
Tao Yu,
Wei Lu
Abstract:
We observe a power-dependent anticrossing of Walker spin-wave modes under microwave pumping when a ferrimagnet is placed in a microwave waveguide that does not support any discrete photon mode. We interpret this unexpected anticrossing as the generation of a pump-induced magnon mode that couples strongly to the Walker modes of the ferrimagnet. This anticrossing inherits an excellent tunability fro…
▽ More
We observe a power-dependent anticrossing of Walker spin-wave modes under microwave pumping when a ferrimagnet is placed in a microwave waveguide that does not support any discrete photon mode. We interpret this unexpected anticrossing as the generation of a pump-induced magnon mode that couples strongly to the Walker modes of the ferrimagnet. This anticrossing inherits an excellent tunability from the pump, which allows us to control the anticrossing via the pump power, frequency, and waveform. Further, we realize a remarkable functionality of this anticrossing, namely, a microwave frequency comb, in terms of the nonlinear interaction that mixes the pump and probe frequencies. Such a frequency comb originates from the magnetic dynamics and thereby does not suffer from the charge noise. The unveiled hybrid magnonics driven away from its equilibrium enriches the utilization of anticrossing for coherent information processing.
△ Less
Submitted 5 August, 2023; v1 submitted 9 April, 2022;
originally announced April 2022.
-
Magneto-Optical Properties of InSb for Infrared Spectral Filtering
Authors:
Nolan Peard,
Dennis Callahan,
Joy C. Perkinson,
Qingyang Du,
Neil S. Patel,
Takian Fakhrul,
John LeBlanc,
Caroline A. Ross,
Juejun Hu,
Christine Y. Wang
Abstract:
We present measurements of the Faraday effect in n-type InSb. The Verdet coefficient was determined for a range of carrier concentrations near $10^{17}$ $\text{cm}^{-3}$ in the $λ$ = 8 $μ$m - 12 $μ$m long-wave infrared regime. The absorption coefficient was measured and a figure of merit calculated for each sample. From these measurements, we calculated the carrier effective mass and illustrate th…
▽ More
We present measurements of the Faraday effect in n-type InSb. The Verdet coefficient was determined for a range of carrier concentrations near $10^{17}$ $\text{cm}^{-3}$ in the $λ$ = 8 $μ$m - 12 $μ$m long-wave infrared regime. The absorption coefficient was measured and a figure of merit calculated for each sample. From these measurements, we calculated the carrier effective mass and illustrate the variation of the figure of merit with wavelength. A method for creating a tunable bandpass filter via the Faraday rotation is discussed along with preliminary results from a prototype device.
△ Less
Submitted 28 November, 2020; v1 submitted 18 August, 2020;
originally announced August 2020.
-
Directly pumped 10 GHz microcomb modules from low-power diode lasers
Authors:
Myoung-Gyun Suh,
Christine Y. Wang,
Cort Johnson,
Kerry Vahala
Abstract:
Soliton microcombs offer the prospect of advanced optical metrology and timing systems in compact form factors. In these applications, pumping of microcombs directly from a semiconductor laser without amplification or triggering components is desirable for reduced power operation and to simplify system design. At the same time, low repetition rate microcombs are required in many comb applications…
▽ More
Soliton microcombs offer the prospect of advanced optical metrology and timing systems in compact form factors. In these applications, pumping of microcombs directly from a semiconductor laser without amplification or triggering components is desirable for reduced power operation and to simplify system design. At the same time, low repetition rate microcombs are required in many comb applications for interface to detectors and electronics, but their increased mode volume makes them challenging to pump at low power. Here, 10 GHz repetition rate soliton microcombs are directly pumped by low-power (< 20 mW) diode lasers. High-Q silica microresonators are used for this low power operation and are packaged into fiber-connectorized modules that feature temperature control for improved long-term frequency stability.
△ Less
Submitted 23 January, 2019;
originally announced January 2019.
-
Investigating Thermal Cooling Mechanisms of Human Body Under Exposure to Electromagnetic Radiation
Authors:
Huan Huan Zhang,
Ying Liu,
Xiaoyan Y. Z. Xiong,
Guang Ming Shi,
Chun Yang Wang,
Wei E. I. Sha
Abstract:
Thermal cooling mechanisms of human exposed to electromagnetic (EM) radiation are studied in detail. The electromagnetic and thermal co-simulation method is utilized to calculate the electromagnetic and temperature distributions. Moreover, Pennes' bioheat equation is solved to understand different thermal cooling mechanisms including blood flow, convective cooling and radiative cooling separately…
▽ More
Thermal cooling mechanisms of human exposed to electromagnetic (EM) radiation are studied in detail. The electromagnetic and thermal co-simulation method is utilized to calculate the electromagnetic and temperature distributions. Moreover, Pennes' bioheat equation is solved to understand different thermal cooling mechanisms including blood flow, convective cooling and radiative cooling separately or jointly. Numerical results demonstrate the characteristics and functions for each cooling mechanism. Different from the traditional view that the cooling effect of blood is usually reflected by its influence on sweat secretion and evaporation, our study indicates that the blood flow itself is an important factor of thermal cooling especially for high-intensity EM radiation. This work contributes to fundamental understanding of thermal cooling mechanisms of human.
△ Less
Submitted 10 January, 2019;
originally announced January 2019.
-
Influence of temperature on the strain rate sensitivity and deformation mechanisms of nanotwinned Cu
Authors:
L. W. Yang,
C. Y. Wang,
M. A. Monclús,
L. Lu,
J. M. Molina-Aldareguía,
J. LLorca
Abstract:
The mechanical behavior of nanotwinned Cu was studied through indentation creep and constant strain rate indentation tests from 25 $^\circ$C to 200 $^\circ$C. The results showed an enhanced strain rate sensitivity of nanotwinned Cu with temperature, which was higher than that found in coarse-grained Cu. Transmission electron microscopy revealed the same deformation mechanism in the whole temperatu…
▽ More
The mechanical behavior of nanotwinned Cu was studied through indentation creep and constant strain rate indentation tests from 25 $^\circ$C to 200 $^\circ$C. The results showed an enhanced strain rate sensitivity of nanotwinned Cu with temperature, which was higher than that found in coarse-grained Cu. Transmission electron microscopy revealed the same deformation mechanism in the whole temperature range: confined dislocation slip between coherent twin boundaries and formation of dislocation pile-ups at the coherent twin boundaries. The mechanisms responsible for large increase in strain rate sensitivity of nanotwinned Cu with temperature were discussed to the light of experimental observations.
△ Less
Submitted 12 May, 2018;
originally announced May 2018.
-
Temporal solitons in optical microresonators
Authors:
T. Herr,
V. Brasch,
J. D. Jost,
C. Y. Wang,
N. M. Kondratiev,
M. L. Gorodetsky,
T. J. Kippenberg
Abstract:
Dissipative solitons can emerge in a wide variety of dissipative nonlinear systems throughout the fields of optics, medicine or biology. Dissipative solitons can also exist in Kerr-nonlinear optical resonators and rely on the double balance between parametric gain and resonator loss on the one hand and nonlinearity and diffraction or dispersion on the other hand. Mathematically these solitons are…
▽ More
Dissipative solitons can emerge in a wide variety of dissipative nonlinear systems throughout the fields of optics, medicine or biology. Dissipative solitons can also exist in Kerr-nonlinear optical resonators and rely on the double balance between parametric gain and resonator loss on the one hand and nonlinearity and diffraction or dispersion on the other hand. Mathematically these solitons are solution to the Lugiato-Lefever equation and exist on top of a continuous wave (cw) background. Here we report the observation of temporal dissipative solitons in a high-Q optical microresonator. The solitons are spontaneously generated when the pump laser is tuned through the effective zero detuning point of a high-Q resonance, leading to an effective red-detuned pumping. Red-detuned pumping marks a fundamentally new operating regime in nonlinear microresonators. While usually unstablethis regime acquires unique stability in the presence of solitons without any active feedback on the system. The number of solitons in the resonator can be controlled via the pump laser detuning and transitions to and between soliton states are associated with discontinuous steps in the resonator transmission. Beyond enabling to study soliton physics such as soliton crystals our observations open the route towards compact, high repetition-rate femto-second sources, where the operating wavelength is not bound to the availability of broadband laser gain media. The single soliton states correspond in the frequency domain to low-noise optical frequency combs with smooth spectral envelopes, critical to applications in broadband spectroscopy, telecommunications, astronomy and low phase-noise microwave generation.
△ Less
Submitted 27 June, 2013; v1 submitted 4 November, 2012;
originally announced November 2012.
-
Mid-Infrared Optical Frequency Combs based on Crystalline Microresonators
Authors:
C. Y. Wang,
T. Herr,
P. Del'Haye,
A. Schliesser,
J. Hofer,
R. Holzwarth,
T. W. Hänsch,
N. Picqué,
T. J. Kippenberg
Abstract:
The mid-infrared spectral range (2 to 20 μm) is of particular importance for chemistry, biology and physics as many molecules exhibit strong ro-vibrational fingerprints. Frequency combs - broad spectral bandwidth coherent light sources consisting of equally spaced sharp lines - are creating new opportunities for advanced spectroscopy. Mid-infrared frequency comb sources have recently emerged but a…
▽ More
The mid-infrared spectral range (2 to 20 μm) is of particular importance for chemistry, biology and physics as many molecules exhibit strong ro-vibrational fingerprints. Frequency combs - broad spectral bandwidth coherent light sources consisting of equally spaced sharp lines - are creating new opportunities for advanced spectroscopy. Mid-infrared frequency comb sources have recently emerged but are still facing technological challenges, like achieving high power per comb line and tens of GHz line spacing as required for e.g. direct comb spectroscopy. Here we demonstrate a novel approach to create such a frequency comb via four-wave mixing in a continuous-wave pumped ultra-high Q crystalline microresonator made of magnesium fluoride. Careful choice of the resonator material and design made it possible to generate a broad comb of narrow lines in the mid-infrared: a vast cascade of about 100 lines spaced by 100 GHz spanning 200 nm (~10 THz) at λ=2.5 μm. With its distinguishing features of compactness, efficient conversion, large mode spacing and high power per comb line, this novel frequency comb source holds promise for new approaches to molecular spectroscopy even deeper in the mid-infrared.
△ Less
Submitted 12 March, 2012; v1 submitted 13 September, 2011;
originally announced September 2011.
-
Thermal-noise limited laser stabilization to a crystalline whispering-gallery-mode resonator
Authors:
J. Alnis,
A. Schliesser,
C. Y. Wang,
J. Hofer,
T. J. Kippenberg,
T. W. Hänsch
Abstract:
We have stabilized an external cavity diode laser to a whispering gallery mode resonator formed by a protrusion of a single-crystal magnesiumdifluoride cylinder. The cylinder's compact dimensions (<1 cm^3) reduce the sensitivity to vibrations and simplify the stabilization of its temperature in a compact setup. In a comparison to an ultrastable laser used for precision metrology we determine a min…
▽ More
We have stabilized an external cavity diode laser to a whispering gallery mode resonator formed by a protrusion of a single-crystal magnesiumdifluoride cylinder. The cylinder's compact dimensions (<1 cm^3) reduce the sensitivity to vibrations and simplify the stabilization of its temperature in a compact setup. In a comparison to an ultrastable laser used for precision metrology we determine a minimum Allan deviation of 20 Hz, corresponding to a relative Allan deviation of 6*10^-14, at an integration time of 100 ms. This level of instability is compatible with the limits imposed by fundamental fluctuations of the material's refractive index at room temperature.
△ Less
Submitted 21 February, 2011;
originally announced February 2011.
-
Stable mode-locked pulses from mid-infrared semiconductor lasers
Authors:
Christine Y. Wang,
L. Kuznetsova,
V. M. Gkortsas,
L. Diehl,
F. X. Kaertner,
M. A. Belkin,
A. Belyanin,
X. Li,
D. Ham,
H Schneider,
P. Grant,
C. Y. Song,
S. Haffouz,
Z. R. Wasilewski,
H. C. Liu,
Federico Capasso
Abstract:
We report the unequivocal demonstration of mid-infrared mode-locked pulses from a semiconductor laser. The train of short pulses was generated by actively modulating the current and hence the optical gain in a small section of an edge-emitting quantum cascade laser (QCL). Pulses with pulse duration at full-width-at-half-maximum of about 3 ps and energy of 0.5 pJ were characterized using a second…
▽ More
We report the unequivocal demonstration of mid-infrared mode-locked pulses from a semiconductor laser. The train of short pulses was generated by actively modulating the current and hence the optical gain in a small section of an edge-emitting quantum cascade laser (QCL). Pulses with pulse duration at full-width-at-half-maximum of about 3 ps and energy of 0.5 pJ were characterized using a second-order interferometric autocorrelation technique based on a nonlinear quantum well infrared photodetector. The mode-locking dynamics in the QCLs was modelled and simulated based on Maxwell-Bloch equations in an open two-level system. We anticipate our results to be a significant step toward a compact, electrically-pumped source generating ultrashort light pulses in the mid-infrared and terahertz spectral ranges.
△ Less
Submitted 25 March, 2009;
originally announced March 2009.
-
Coherent instabilities in a semiconductor laser with fast gain recovery
Authors:
C. Y. Wang,
L. Diehl,
A. Gordon,
C. Jirauschek,
F. X. Kaertner,
A. Belyanin,
D. Bour,
S. Corzine,
G. Hoefler,
M. Troccoli,
J. Faist,
F. Capasso
Abstract:
We report the observation of a coherent multimode instability in quantum cascade lasers (QCLs), which is driven by the same fundamental mechanism of Rabi oscillations as the elusive Risken-Nummedal-Graham-Haken (RNGH) instability predicted 40 years ago for ring lasers. The threshold of the observed instability is significantly lower than in the original RNGH instability, which we attribute to sa…
▽ More
We report the observation of a coherent multimode instability in quantum cascade lasers (QCLs), which is driven by the same fundamental mechanism of Rabi oscillations as the elusive Risken-Nummedal-Graham-Haken (RNGH) instability predicted 40 years ago for ring lasers. The threshold of the observed instability is significantly lower than in the original RNGH instability, which we attribute to saturable-absorption nonlinearity in the laser. Coherent effects, which cannot be reproduced by standard laser rate equations, can play therefore a key role in the multimode dynamics of QCLs, and in lasers with fast gain recovery in general.
△ Less
Submitted 7 December, 2006;
originally announced December 2006.
-
Spin-Polarized Electron Transport through Nanometer-Scale Al Grains
Authors:
L. Y. Zhang,
C. Y. Wang,
Y. G. Wei,
X. Y. Liu,
D. Davidovic
Abstract:
We investigate spin-polarized electron tunnelling through ensembles of nanometer scale Al grains embedded between two Co-reservoirs at 4.2K, and observe tunnelling-magnetoresistance (TMR) and effects from spin-precession in the perpendicular applied magnetic field (the Hanle effect). The spin-coherence time ($T_2^\star$) measured using the Hanle effect is of order $ns$. The dephasing is attribut…
▽ More
We investigate spin-polarized electron tunnelling through ensembles of nanometer scale Al grains embedded between two Co-reservoirs at 4.2K, and observe tunnelling-magnetoresistance (TMR) and effects from spin-precession in the perpendicular applied magnetic field (the Hanle effect). The spin-coherence time ($T_2^\star$) measured using the Hanle effect is of order $ns$. The dephasing is attributed to electron spin-precession in local magnetic fields. Dephasing process does not destroy $TMR$, which is strongly asymmetric with bias voltage. The asymmetric TMR is explained by spin relaxation in Al grains and asymmetric electron dwell times.
△ Less
Submitted 1 December, 2005; v1 submitted 7 February, 2005;
originally announced February 2005.
-
Modulation induced frequency shifts in a CPT-based atomic clock
Authors:
D. F. Phillips,
I. Novikova,
C. Y. -T. Wang,
M. Crescimanno,
R. L. Walsworth
Abstract:
We investigate systematic errors associated with a common modulation technique used for phase sensitive detection of a coherent population trapping (CPT) resonance. In particular, we show that modification of the CPT resonance lineshape due to the presence of off-resonant fields leads to frequency shifts which may limit the stability of CPT-based atomic clocks. We also demonstrate that an altern…
▽ More
We investigate systematic errors associated with a common modulation technique used for phase sensitive detection of a coherent population trapping (CPT) resonance. In particular, we show that modification of the CPT resonance lineshape due to the presence of off-resonant fields leads to frequency shifts which may limit the stability of CPT-based atomic clocks. We also demonstrate that an alternative demodulation technique greatly reduces these effects.
△ Less
Submitted 15 April, 2004;
originally announced April 2004.
