Adaptive sampling with PIXL on the Mars Perseverance rover
Authors:
Peter R. Lawson,
Tanya V. Kizovski,
Michael M. Tice,
Benton C. Clark III,
Scott J. VanBommel,
David R. Thompson,
Lawrence A. Wade,
Robert W. Denise,
Christopher M. Heirwegh,
W. Timothy Elam,
Mariek E. Schmidt,
Yang Liu,
Abigail C. Allwood,
Martin S. Gilbert,
Benjamin J. Bornstein
Abstract:
Planetary rovers can use onboard data analysis to adapt their measurement plan on the fly, improving the science value of data collected between commands from Earth. This paper describes the implementation of an adaptive sampling algorithm used by PIXL, the X-ray fluorescence spectrometer of the Mars 2020 Perseverance rover. PIXL is deployed using the rover arm to measure X-ray spectra of rocks wi…
▽ More
Planetary rovers can use onboard data analysis to adapt their measurement plan on the fly, improving the science value of data collected between commands from Earth. This paper describes the implementation of an adaptive sampling algorithm used by PIXL, the X-ray fluorescence spectrometer of the Mars 2020 Perseverance rover. PIXL is deployed using the rover arm to measure X-ray spectra of rocks with a scan density of several thousand points over an area of typically 5 x 7 mm. The adaptive sampling algorithm is programmed to recognize points of interest and to increase the signal-to-noise ratio at those locations by performing longer integrations. Two approaches are used to formulate the sampling rules based on past quantification data: 1) Expressions that isolate particular regions within a ternary compositional diagram, and 2) Machine learning rules that threshold for a high weight percent of particular compounds. The design of the rulesets are outlined and the performance of the algorithm is quantified using measurements from the surface of Mars. To our knowledge, PIXL's adaptive sampling represents the first autonomous decision-making based on real-time compositional analysis by a spacecraft on the surface of another planet.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
Pre-Flight Calibration of PIXL for X-ray Fluorescence Elemental Quantification
Authors:
Christopher M. Heirwegh,
William Timothy Elam,
Yang Liu,
Anusheela Das,
Christopher Hummel,
Bret Naylor,
Lawrence A. Wade,
Abigail C. Allwood,
Joel A. Hurowitz,
Les G. Armstrong,
Naomi Bacop,
Lauren P. O'Neil,
Kimberly P. Sinclair,
Michael E. Sondheim,
Robert W. Denise,
Peter R. Lawson,
Rogelio Rosas,
Jonathan H. Kawamura,
Mitchell H. Au,
Amarit Kitiyakara,
Marc C. Foote,
Raul A. Romero,
Mark S. Anderson,
George R. Rossman,
Benton C. Clark III
Abstract:
The Planetary Instrument for X-ray Lithochemistry (PIXL) is a rasterable focused-beam X-ray fluorescence (XRF) spectrometer mounted on the arm of National Aeronautics and Space Administration's (NASA) Mars 2020 Perseverance rover. To ensure that PIXL would be capable of performing accurate in-flight compositional analysis of martian targets, in situ, an elemental calibration was performed pre-flig…
▽ More
The Planetary Instrument for X-ray Lithochemistry (PIXL) is a rasterable focused-beam X-ray fluorescence (XRF) spectrometer mounted on the arm of National Aeronautics and Space Administration's (NASA) Mars 2020 Perseverance rover. To ensure that PIXL would be capable of performing accurate in-flight compositional analysis of martian targets, in situ, an elemental calibration was performed pre-flight on the PIXL flight instrument in a simulated martian environment. The details of this calibration, and implications for measuring unknown materials on Mars are the subjects of this paper. The major goals of this calibration were both to align the spectrometer to perform accurate elemental analysis and, to derive a matrix of uncertainties that are applied to XRF measurements of all elements in unknown materials. A small set of pure element and pure compound targets and geologically relevant reference materials were measured with the flight hardware in a simulated martian environment. Elemental calibration and quantifications were carried out using PIXL's XRF quantification software (PIQUANT). Uncertainties generated were implemented into the PIQUANT software version employed by the PIXL's data visualization software (PIXLISE). We outline in this work, a list of factors that impact micro-XRF accuracy, the methodology and steps involved in the calibration, details on the fabrication of the uncertainty matrix, instructions on the use and interpretations of the uncertainties applied to unknowns and an assessment on the limitations and areas open to future improvement as part of subsequent calibration efforts.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.