-
Euclid. IV. The NISP Calibration Unit
Authors:
Euclid Collaboration,
F. Hormuth,
K. Jahnke,
M. Schirmer,
C. G. -Y. Lee,
T. Scott,
R. Barbier,
S. Ferriol,
W. Gillard,
F. Grupp,
R. Holmes,
W. Holmes,
B. Kubik,
J. Macias-Perez,
M. Laurent,
J. Marpaud,
M. Marton,
E. Medinaceli,
G. Morgante,
R. Toledo-Moreo,
M. Trifoglio,
Hans-Walter Rix,
A. Secroun,
M. Seiffert,
P. Stassi
, et al. (310 additional authors not shown)
Abstract:
The near-infrared calibration unit (NI-CU) on board Euclid's Near-Infrared Spectrometer and Photometer (NISP) is the first astronomical calibration lamp based on light-emitting diodes (LEDs) to be operated in space. Euclid is a mission in ESA's Cosmic Vision 2015-2025 framework, to explore the dark universe and provide a next-level characterisation of the nature of gravitation, dark matter, and da…
▽ More
The near-infrared calibration unit (NI-CU) on board Euclid's Near-Infrared Spectrometer and Photometer (NISP) is the first astronomical calibration lamp based on light-emitting diodes (LEDs) to be operated in space. Euclid is a mission in ESA's Cosmic Vision 2015-2025 framework, to explore the dark universe and provide a next-level characterisation of the nature of gravitation, dark matter, and dark energy. Calibrating photometric and spectrometric measurements of galaxies to better than 1.5% accuracy in a survey homogeneously mapping ~14000 deg^2 of extragalactic sky requires a very detailed characterisation of near-infrared (NIR) detector properties, as well their constant monitoring in flight. To cover two of the main contributions - relative pixel-to-pixel sensitivity and non-linearity characteristics - as well as support other calibration activities, NI-CU was designed to provide spatially approximately homogeneous (<12% variations) and temporally stable illumination (0.1%-0.2% over 1200s) over the NISP detector plane, with minimal power consumption and energy dissipation. NI-CU is covers the spectral range ~[900,1900] nm - at cryo-operating temperature - at 5 fixed independent wavelengths to capture wavelength-dependent behaviour of the detectors, with fluence over a dynamic range of >=100 from ~15 ph s^-1 pixel^-1 to >1500 ph s^-1 pixel^-1. For this functionality, NI-CU is based on LEDs. We describe the rationale behind the decision and design process, describe the challenges in sourcing the right LEDs, as well as the qualification process and lessons learned. We also provide a description of the completed NI-CU, its capabilities and performance as well as its limits. NI-CU has been integrated into NISP and the Euclid satellite, and since Euclid's launch in July 2023 has started supporting survey operations.
△ Less
Submitted 10 July, 2024; v1 submitted 22 May, 2024;
originally announced May 2024.
-
The First Orbital Flight of the ELROI Optical Satellite License Plate
Authors:
David M. Palmer,
Rebecca M. Holmes,
Charles T. Weaver
Abstract:
Space Object Identification is one of the cornerstones of Space Traffic Control and a requirement for successful operation of a spacecraft.
ELROI, the Extremely Low Resource Optical Identifier, is a new concept that can provide a self-powered satellite identification beacon in a package the size of a thick postage stamp. Its small size, low cost, and fully autonomous operation make it usable by…
▽ More
Space Object Identification is one of the cornerstones of Space Traffic Control and a requirement for successful operation of a spacecraft.
ELROI, the Extremely Low Resource Optical Identifier, is a new concept that can provide a self-powered satellite identification beacon in a package the size of a thick postage stamp. Its small size, low cost, and fully autonomous operation make it usable by all space objects, including CubeSats and inert debris objects.
The beacon's signal is received on the ground using a small telescope equipped with a photon-counting detector which can unambiguously determine the satellite identification number during a single pass overhead. Additional information can be included in the signal to aid in anomaly diagnosis and resolution, further improving spaceflight reliability and safety.
The first ELROI unit in orbit was launched December, 2018 as a payload on the student CubeSat NMTSat. We are now searching for the identification signal.
△ Less
Submitted 29 July, 2019;
originally announced July 2019.
-
Extreme background-rejection techniques for the ELROI optical satellite license plate
Authors:
Rebecca M. Holmes,
David M. Palmer
Abstract:
The Extremely Low-Resource Optical Identifier (ELROI) is a concept for an autonomous, low-power optical "license plate" that can be attached to anything that goes into space. ELROI uses short, omnidirectional flashes of laser light to encode a unique ID number which can be read by a small ground telescope using a photon-counting sensor and innovative extreme background-rejection techniques. ELROI…
▽ More
The Extremely Low-Resource Optical Identifier (ELROI) is a concept for an autonomous, low-power optical "license plate" that can be attached to anything that goes into space. ELROI uses short, omnidirectional flashes of laser light to encode a unique ID number which can be read by a small ground telescope using a photon-counting sensor and innovative extreme background-rejection techniques. ELROI is smaller and lighter than a typical radio beacon, low-power enough to run on its own small solar cell, and can safely operate for the entire orbital lifetime of a satellite or debris object. The concept has been validated in ground tests, and orbital prototypes are scheduled for launch in 2018 and beyond. In this paper we focus on the details of the encoding scheme and data analysis that allow a milliwatt optical signal to be read from orbit. We describe the techniques of extreme background-rejection needed to achieve this, including spectral filtering and temporal filtering using a period- and phase-recovery algorithm, and discuss the requirements for an error-correcting code to encode the ID number. Worked examples with both simulated and experimental (long-range ground test) data illustrate the methods used. We present these techniques to describe a new optical communication concept, and to encourage others to consider observing and analyzing our upcoming test flights.
△ Less
Submitted 23 January, 2019; v1 submitted 2 October, 2018;
originally announced October 2018.
-
Progress on ELROI satellite license plate flight prototypes
Authors:
Rebecca M. Holmes,
Sawyer Gill,
James Z. Harris,
Joellen S. Lansford,
Riley Myers,
Charles T. Weaver,
Aaron P. Zucherman,
Anders M. Jorgensen,
David M. Palmer
Abstract:
The Extremely Low-Resource Optical Identifier (ELROI) beacon is a concept for a milliwatt optical "license plate" that can provide unique ID numbers for everything that goes into space. Using photon counting to enable extreme background rejection in real time, the ID number can be uniquely identified from the ground in a few minutes, even if the ground station detects only a few photons per second…
▽ More
The Extremely Low-Resource Optical Identifier (ELROI) beacon is a concept for a milliwatt optical "license plate" that can provide unique ID numbers for everything that goes into space. Using photon counting to enable extreme background rejection in real time, the ID number can be uniquely identified from the ground in a few minutes, even if the ground station detects only a few photons per second. The ELROI concept has been validated in long-range ground tests, and orbital prototypes are scheduled for launch in 2018 and beyond. We discuss the design and signal characteristics of these prototypes, including a PC-104 form factor unit which was integrated into a CubeSat and is currently scheduled to launch in May 2018, and basic requirements on ground stations for observing them. We encourage others to consider observing our test flights.
△ Less
Submitted 2 April, 2018;
originally announced April 2018.
-
ELROI: A License Plate For Your Satellite
Authors:
David M. Palmer,
Rebecca M. Holmes
Abstract:
Space object identification is vital for operating spacecraft, space traffic control, and space situational awareness, but initial determination, maintenance, and recovery of identity are all difficult, expensive, and error-prone, especially for small objects like CubeSats. Attaching a beacon or license plate with a unique identification number to a space object before launch would greatly simplif…
▽ More
Space object identification is vital for operating spacecraft, space traffic control, and space situational awareness, but initial determination, maintenance, and recovery of identity are all difficult, expensive, and error-prone, especially for small objects like CubeSats. Attaching a beacon or license plate with a unique identification number to a space object before launch would greatly simplify the task, but radio beacons are power-hungry and can cause interference. This paper describes a new concept for a satellite license plate, the Extremely Low Resource Optical Identifier or ELROI. ELROI is a milliwatt-scale self-powered autonomous optical beacon that can be attached to any space object to transmit a persistent identification signal to ground stations. A system appropriate for a LEO CubeSat or other small space object can fit in a package with the area of a postage stamp and a few millimeters thick, and requires no power, data, or control from the host object. The concept has been validated with ground tests, and the first flight test unit is scheduled for launch in 2018. The unique identification number of a LEO satellite can be determined unambiguously in a single orbital pass over a low-cost ground station.
△ Less
Submitted 13 February, 2018;
originally announced February 2018.
-
Cosmology and Fundamental Physics with the Euclid Satellite
Authors:
Luca Amendola,
Stephen Appleby,
Anastasios Avgoustidis,
David Bacon,
Tessa Baker,
Marco Baldi,
Nicola Bartolo,
Alain Blanchard,
Camille Bonvin,
Stefano Borgani,
Enzo Branchini,
Clare Burrage,
Stefano Camera,
Carmelita Carbone,
Luciano Casarini,
Mark Cropper,
Claudia de Rham,
Joerg P. Dietrich,
Cinzia Di Porto,
Ruth Durrer,
Anne Ealet,
Pedro G. Ferreira,
Fabio Finelli,
Juan Garcia-Bellido,
Tommaso Giannantonio
, et al. (47 additional authors not shown)
Abstract:
Euclid is a European Space Agency medium class mission selected for launch in 2020 within the Cosmic Vision 2015 2025 program. The main goal of Euclid is to understand the origin of the accelerated expansion of the universe. Euclid will explore the expansion history of the universe and the evolution of cosmic structures by measuring shapes and redshifts of galaxies as well as the distribution of c…
▽ More
Euclid is a European Space Agency medium class mission selected for launch in 2020 within the Cosmic Vision 2015 2025 program. The main goal of Euclid is to understand the origin of the accelerated expansion of the universe. Euclid will explore the expansion history of the universe and the evolution of cosmic structures by measuring shapes and redshifts of galaxies as well as the distribution of clusters of galaxies over a large fraction of the sky. Although the main driver for Euclid is the nature of dark energy, Euclid science covers a vast range of topics, from cosmology to galaxy evolution to planetary research. In this review we focus on cosmology and fundamental physics, with a strong emphasis on science beyond the current standard models. We discuss five broad topics: dark energy and modified gravity, dark matter, initial conditions, basic assumptions and questions of methodology in the data analysis. This review has been planned and carried out within Euclid's Theory Working Group and is meant to provide a guide to the scientific themes that will underlie the activity of the group during the preparation of the Euclid mission.
△ Less
Submitted 1 June, 2016;
originally announced June 2016.
-
The Pan-STARRS Moving Object Processing System
Authors:
Larry Denneau,
Robert Jedicke,
Tommy Grav,
Mikael Granvik,
Jeremy Kubica,
Andrea Milani,
Peter Veres,
Richard Wainscoat,
Daniel Chang,
Francesco Pierfederici,
N. Kaiser,
K. C. Chambers,
J. N. Heasley,
Eugene. A. Magnier,
P. A. Price,
Jonathan Myers,
Jan Kleyna,
Henry Hsieh,
Davide Farnocchia,
Chris Waters,
W. H. Sweeney,
Denver Green,
Bryce Bolin,
W. S. Burgett,
J. S. Morgan
, et al. (19 additional authors not shown)
Abstract:
We describe the Pan-STARRS Moving Object Processing System (MOPS), a modern software package that produces automatic asteroid discoveries and identifications from catalogs of transient detections from next-generation astronomical survey telescopes. MOPS achieves > 99.5% efficiency in producing orbits from a synthetic but realistic population of asteroids whose measurements were simulated for a Pan…
▽ More
We describe the Pan-STARRS Moving Object Processing System (MOPS), a modern software package that produces automatic asteroid discoveries and identifications from catalogs of transient detections from next-generation astronomical survey telescopes. MOPS achieves > 99.5% efficiency in producing orbits from a synthetic but realistic population of asteroids whose measurements were simulated for a Pan-STARRS4-class telescope. Additionally, using a non-physical grid population, we demonstrate that MOPS can detect populations of currently unknown objects such as interstellar asteroids.
MOPS has been adapted successfully to the prototype Pan-STARRS1 telescope despite differences in expected false detection rates, fill-factor loss and relatively sparse observing cadence compared to a hypothetical Pan-STARRS4 telescope and survey. MOPS remains >99.5% efficient at detecting objects on a single night but drops to 80% efficiency at producing orbits for objects detected on multiple nights. This loss is primarily due to configurable MOPS processing limits that are not yet tuned for the Pan-STARRS1 mission.
The core MOPS software package is the product of more than 15 person-years of software development and incorporates countless additional years of effort in third-party software to perform lower-level functions such as spatial searching or orbit determination. We describe the high-level design of MOPS and essential subcomponents, the suitability of MOPS for other survey programs, and suggest a road map for future MOPS development.
△ Less
Submitted 28 February, 2013;
originally announced February 2013.
-
Euclid Mission: building of a Reference Survey
Authors:
J. Amiaux,
R. Scaramella,
Y. Mellier,
B. Altieri,
C. Burigana,
A. Da Silva,
P. Gomez,
J. Hoar,
R. Laureijs,
E. Maiorano,
D. Magalhaes Oliveira,
F. Renk,
G. Saavedra Criado,
I. Tereno,
J. L. Augueres,
J. Brinchmann,
M. Cropper,
L. Duvet,
A. Ealet,
P. Franzetti,
B. Garilli,
P. Gondoin,
L. Guzzo,
H. Hoekstra,
R. Holmes
, et al. (6 additional authors not shown)
Abstract:
Euclid is an ESA Cosmic-Vision wide-field-space mission which is designed to explain the origin of the acceleration of Universe expansion. The mission will investigate at the same time two primary cosmological probes: Weak gravitational Lensing (WL) and Galaxy Clustering (in particular Baryon Acoustic Oscillations, BAO). The extreme precision requested on primary science objectives can only be ach…
▽ More
Euclid is an ESA Cosmic-Vision wide-field-space mission which is designed to explain the origin of the acceleration of Universe expansion. The mission will investigate at the same time two primary cosmological probes: Weak gravitational Lensing (WL) and Galaxy Clustering (in particular Baryon Acoustic Oscillations, BAO). The extreme precision requested on primary science objectives can only be achieved by observing a large number of galaxies distributed over the whole sky in order to probe the distribution of dark matter and galaxies at all scales. The extreme accuracy needed requires observation from space to limit all observational biases in the measurements. The definition of the Euclid survey, aiming at detecting billions of galaxies over 15 000 square degrees of the extragalactic sky, is a key parameter of the mission. It drives its scientific potential, its duration and the mass of the spacecraft. The construction of a Reference Survey derives from the high level science requirements for a Wide and a Deep survey. The definition of a main sequence of observations and the associated calibrations were indeed a major achievement of the Definition Phase. Implementation of this sequence demonstrated the feasibility of covering the requested area in less than 6 years while taking into account the overheads of space segment observing and maneuvering sequence. This reference mission will be used for sizing the spacecraft consumables needed for primary science. It will also set the framework for optimizing the time on the sky to fulfill the primary science and maximize the Euclid legacy.
△ Less
Submitted 11 September, 2012;
originally announced September 2012.
-
Cosmology and fundamental physics with the Euclid satellite
Authors:
Luca Amendola,
Stephen Appleby,
David Bacon,
Tessa Baker,
Marco Baldi,
Nicola Bartolo,
Alain Blanchard,
Camille Bonvin,
Stefano Borgani,
Enzo Branchini,
Clare Burrage,
Stefano Camera,
Carmelita Carbone,
Luciano Casarini,
Mark Cropper,
Claudia deRham,
Cinzia di Porto,
Anne Ealet,
Pedro G. Ferreira,
Fabio Finelli,
Juan Garcia-Bellido,
Tommaso Giannantonio,
Luigi Guzzo,
Alan Heavens,
Lavinia Heisenberg
, et al. (38 additional authors not shown)
Abstract:
Euclid is a European Space Agency medium class mission selected for launch in 2019 within the Cosmic Vision 2015-2025 programme. The main goal of Euclid is to understand the origin of the accelerated expansion of the Universe. Euclid will explore the expansion history of the Universe and the evolution of cosmic structures by measuring shapes and redshifts of galaxies as well as the distribution of…
▽ More
Euclid is a European Space Agency medium class mission selected for launch in 2019 within the Cosmic Vision 2015-2025 programme. The main goal of Euclid is to understand the origin of the accelerated expansion of the Universe. Euclid will explore the expansion history of the Universe and the evolution of cosmic structures by measuring shapes and redshifts of galaxies as well as the distribution of clusters of galaxies over a large fraction of the sky. Although the main driver for Euclid is the nature of dark energy, Euclid science covers a vast range of topics, from cosmology to galaxy evolution to planetary research. In this review we focus on cosmology and fundamental physics, with a strong emphasis on science beyond the current standard models. We discuss five broad topics: dark energy and modified gravity, dark matter, initial conditions, basic assumptions and questions of methodology in the data analysis. This review has been planned and carried out within Euclid's Theory Working Group and is meant to provide a guide to the scientific themes that will underlie the activity of the group during the preparation of the Euclid mission.
△ Less
Submitted 22 October, 2015; v1 submitted 6 June, 2012;
originally announced June 2012.
-
Imaging sub-milliarcsecond stellar features with intensity interferometry using air Cherenkov telescope arrays
Authors:
Paul D. Nunez,
Richard Holmes,
David Kieda,
Janvida Rou,
Stephan LeBohec
Abstract:
Recent proposals have been advanced to apply imaging air Cherenkov telescope arrays to stellar intensity interferometry (SII). Of particular interest is the possibility of model-independent image recovery afforded by the good (u, v)-plane coverage of these arrays, as well as recent developments in phase retrieval techniques. The capabilities of these instruments used as SII receivers have already…
▽ More
Recent proposals have been advanced to apply imaging air Cherenkov telescope arrays to stellar intensity interferometry (SII). Of particular interest is the possibility of model-independent image recovery afforded by the good (u, v)-plane coverage of these arrays, as well as recent developments in phase retrieval techniques. The capabilities of these instruments used as SII receivers have already been explored for simple stellar objects, and here the focus is on reconstructing stellar images with non-uniform radiance distributions. We find that hot stars (T > 6000 K) containing hot and/or cool localized regions (T \sim 500 K) as small as \sim 0.1 mas can be imaged at short wavelengths (λ = 400 nm).
△ Less
Submitted 25 May, 2012;
originally announced May 2012.
-
Designing Imaging Surveys for a Retrospective Relative Photometric Calibration
Authors:
Rory Holmes,
David W. Hogg,
Hans-Walter Rix
Abstract:
In this paper, we investigate the impact of survey strategy on the performance of self-calibration when the goal is to produce accurate photometric catalogs from wide-field imaging surveys. This self-calibration technique utilizes multiple measurements of sources at different focal-plane positions to constrain instruments' large-scale response (flat-field) from survey science data alone. We create…
▽ More
In this paper, we investigate the impact of survey strategy on the performance of self-calibration when the goal is to produce accurate photometric catalogs from wide-field imaging surveys. This self-calibration technique utilizes multiple measurements of sources at different focal-plane positions to constrain instruments' large-scale response (flat-field) from survey science data alone. We create an artificial sky of sources and synthetically observe it under four basic survey strategies, creating an end-to-end simulation of an imaging survey for each. These catalog-level simulations include realistic measurement uncertainties and a complex focal-plane dependence of the instrument response. In the self-calibration step, we simultaneously fit for all the star fluxes and the parameters of a position-dependent flat-field. For realism, we deliberately fit with a wrong noise model and a flat-field functional basis that does not include the model that generated the synthetic data. We demonstrate that with a favorable survey strategy, a complex instrument response can be precisely self-calibrated. We show that returning the same sources to very different focal-plane positions is the key property of any survey strategy designed for accurate retrospective calibration of this type. The results of this work suggest the following advice for those considering the design of large-scale imaging surveys: Do not use a regular, repeated tiling of the sky; instead return the same sources to very different focal-plane positions.
△ Less
Submitted 4 October, 2012; v1 submitted 28 March, 2012;
originally announced March 2012.
-
Euclid Definition Study Report
Authors:
R. Laureijs,
J. Amiaux,
S. Arduini,
J. -L. Auguères,
J. Brinchmann,
R. Cole,
M. Cropper,
C. Dabin,
L. Duvet,
A. Ealet,
B. Garilli,
P. Gondoin,
L. Guzzo,
J. Hoar,
H. Hoekstra,
R. Holmes,
T. Kitching,
T. Maciaszek,
Y. Mellier,
F. Pasian,
W. Percival,
J. Rhodes,
G. Saavedra Criado,
M. Sauvage,
R. Scaramella
, et al. (194 additional authors not shown)
Abstract:
Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for tw…
▽ More
Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for two independent primary cosmological probes: Weak gravitational Lensing (WL) and Baryonic Acoustic Oscillations (BAO). The Euclid payload consists of a 1.2 m Korsch telescope designed to provide a large field of view. It carries two instruments with a common field-of-view of ~0.54 deg2: the visual imager (VIS) and the near infrared instrument (NISP) which contains a slitless spectrometer and a three bands photometer. The Euclid wide survey will cover 15,000 deg2 of the extragalactic sky and is complemented by two 20 deg2 deep fields. For WL, Euclid measures the shapes of 30-40 resolved galaxies per arcmin2 in one broad visible R+I+Z band (550-920 nm). The photometric redshifts for these galaxies reach a precision of dz/(1+z) < 0.05. They are derived from three additional Euclid NIR bands (Y, J, H in the range 0.92-2.0 micron), complemented by ground based photometry in visible bands derived from public data or through engaged collaborations. The BAO are determined from a spectroscopic survey with a redshift accuracy dz/(1+z) =0.001. The slitless spectrometer, with spectral resolution ~250, predominantly detects Ha emission line galaxies. Euclid is a Medium Class mission of the ESA Cosmic Vision 2015-2025 programme, with a foreseen launch date in 2019. This report (also known as the Euclid Red Book) describes the outcome of the Phase A study.
△ Less
Submitted 14 October, 2011;
originally announced October 2011.
-
High angular resolution imaging with stellar intensity interferometry using air Cherenkov telescope arrays
Authors:
Paul D. Nunez,
Richard Holmes,
David Kieda,
Stephan LeBohec
Abstract:
Optical stellar intensity interferometry with air Cherenkov telescope arrays, composed of nearly 100 telescopes, will provide means to measure fundamental stellar parameters and also open the possibility of model-independent imaging. In addition to sensitivity issues, a main limitation of image recovery in intensity interferometry is the loss of phase of the complex degree of coherence during the…
▽ More
Optical stellar intensity interferometry with air Cherenkov telescope arrays, composed of nearly 100 telescopes, will provide means to measure fundamental stellar parameters and also open the possibility of model-independent imaging. In addition to sensitivity issues, a main limitation of image recovery in intensity interferometry is the loss of phase of the complex degree of coherence during the measurement process. Nevertheless, several model-independent phase reconstruction techniques have been developed. Here we implement a Cauchy-Riemann based algorithm to recover images from simulated data. For bright stars (m_v~6) and exposure times of a few hours, we find that scale features such as diameters, oblateness and overall shapes are reconstructed with uncertainties of a few percent. More complex images are also well reconstructed with high degrees of correlation with the pristine image. Results are further improved by using a forward algorithm.
△ Less
Submitted 23 August, 2011;
originally announced August 2011.
-
The Spectroscopic Classification and Explosion Properties of SN2009nz Associated with GRB091127 at z=0.490
Authors:
E. Berger,
R. Chornock,
T. R. Holmes,
R. J. Foley,
A. Cucchiara,
C. Wolf,
Ph. Podsiadlowski,
D. B. Fox,
K. C. Roth
Abstract:
We present spectroscopic observations of GRB091127 (z=0.490) at the peak of the putative associated supernova, SN2009nz. Subtracting a late-time spectrum of the host galaxy, we isolate the contribution of SN2009nz and uncover broad features typical of nearby GRB-SNe. This establishes unambiguously that GRB091127 was accompanied by a broad-lined Type Ic SN, and links a cosmological long burst with…
▽ More
We present spectroscopic observations of GRB091127 (z=0.490) at the peak of the putative associated supernova, SN2009nz. Subtracting a late-time spectrum of the host galaxy, we isolate the contribution of SN2009nz and uncover broad features typical of nearby GRB-SNe. This establishes unambiguously that GRB091127 was accompanied by a broad-lined Type Ic SN, and links a cosmological long burst with a standard energy release (E_gamma,iso ~ 1.1e52 erg) to a massive star progenitor. The spectrum of SN2009nz closely resembles that of SN2006aj, with SN2003dh also providing an acceptable match, but has significantly narrower features than SNe 1998bw and 2010bh, indicative of a lower expansion velocity. The photospheric velocity inferred from the SiII 6355 absorption feature, v_ph ~ 17,000 km/s, is indeed closer to that of SNe 2006aj and 2003dh than to the other GRB-SNe. Combining the measured velocity with the light curve peak brightness and width, we estimate the following explosion parameters: M_Ni ~ 0.35 M_sun, E_K ~ 2.3e51 erg, and M_ej ~ 1.4 M_sun, similar to those of SN2006aj. These properties indicate that SN2009nz follows a trend of lower M_Ni for GRB-SNe with lower E_K and M_ej. Equally important, since GRB091127 is a typical cosmological burst, the similarity of SN2009nz to SN2006aj either casts doubt on the claim that XRF060218/SN2006aj was powered by a neutron star, or indicates that the nature of the central engine is encoded in the SN properties but not in the prompt emission. Future spectra of GRB-SNe at z > 0.3, including proper subtraction of the host galaxy contribution, will shed light on the full dispersion of SN properties for standard long GRBs, on the relation between SNe associated with sub-energetic and standard GRBs, and on a potential dispersion in the associated SN types.
△ Less
Submitted 15 June, 2011;
originally announced June 2011.
-
Stellar Intensity Interferometry: Imaging capabilities of air Cherenkov telescope arrays
Authors:
Paul D. Nunez,
Stephan LeBohec,
David Kieda,
Richard Holmes,
Hannes Jensen,
Dainis Dravins
Abstract:
Sub milli-arcsecond imaging in the visible band will provide a new perspective in stellar astrophysics. Even though stellar intensity interferometry was abandoned more than 40 years ago, it is capable of imaging and thus accomplishing more than the measurement of stellar diameters as was previously thought. Various phase retrieval techniques can be used to reconstruct actual images provided a suff…
▽ More
Sub milli-arcsecond imaging in the visible band will provide a new perspective in stellar astrophysics. Even though stellar intensity interferometry was abandoned more than 40 years ago, it is capable of imaging and thus accomplishing more than the measurement of stellar diameters as was previously thought. Various phase retrieval techniques can be used to reconstruct actual images provided a sufficient coverage of the interferometric plane is available. Planned large arrays of Air Cherenkov telescopes will provide thousands of simultaneously available baselines ranging from a few tens of meters to over a kilometer, thus making imaging possible with unprecedented angular resolution. Here we investigate the imaging capabilities of arrays such as CTA or AGIS used as Stellar Intensity Interferometry receivers. The study makes use of simulated data as could realistically be obtained from these arrays. A Cauchy-Riemann based phase recovery allows the reconstruction of images which can be compared to the pristine image for which the data were simulated. This is first done for uniform disk stars with different radii and corresponding to various exposure times, and we find that the uncertainty in reconstructing radii is a few percent after a few hours of exposure time. Finally, more complex images are considered, showing that imaging at the sub-milli-arc-second scale is possible.
△ Less
Submitted 28 September, 2010;
originally announced September 2010.
-
The Fibre Multi-Object Spectrograph (FMOS) for Subaru Telescope
Authors:
Masahiko Kimura,
Toshinori Maihara,
Fumihide Iwamuro,
Masayuki Akiyama,
Naoyuki Tamura,
Gavin B. Dalton,
Naruhisa Takato,
Philip Tait,
Kouji Ohta,
Shigeru Eto,
Daisaku Mochida,
Brian Elms,
Kaori Kawate,
Tomio Kurakami,
Yuuki Moritani,
Junichi Noumaru,
Norio Ohshima,
Masanao Sumiyoshi,
Kiyoto Yabe,
Jurek Brzeski,
Tony Farrell,
Gabriella Frost,
Peter R. Gillingham,
Roger Haynes,
Anna M. Moore
, et al. (17 additional authors not shown)
Abstract:
Fibre Multi-Object Spectrograph (FMOS) is the first near-infrared instrument with a wide field of view capable of acquiring spectra simultaneously from up to 400 objects. It has been developed as a common-use instrument for the F/2 prime-focus of the Subaru Telescope. The field coverage of 30' diameter is achieved using a new 3-element corrector optimized in the near-infrared (0.9-1.8um) wavelengt…
▽ More
Fibre Multi-Object Spectrograph (FMOS) is the first near-infrared instrument with a wide field of view capable of acquiring spectra simultaneously from up to 400 objects. It has been developed as a common-use instrument for the F/2 prime-focus of the Subaru Telescope. The field coverage of 30' diameter is achieved using a new 3-element corrector optimized in the near-infrared (0.9-1.8um) wavelength range. Due to limited space at the prime-focus, we have had to develop a novel fibre positioner called "Echidna" together with two OH-airglow suppressed spectrographs. FMOS consists of three subsystems: the prime focus unit for IR, the fibre positioning system/connector units, and the two spectrographs. After full systems integration, FMOS was installed on the telescope in late 2007. Many aspects of performance were checked through various test and engineering observations. In this paper, we present the optical and mechanical components of FMOS and show the results of our on-sky engineering observations to date.
△ Less
Submitted 15 June, 2010;
originally announced June 2010.
