-
The neutrino roof: Single-scatter ceilings in dark matter direct detection
Authors:
Nirmal Raj,
Biprajit Mondal
Abstract:
We identify the maximum cross sections probed by single-scatter ``WIMP" searches in dark matter direct detection. Due to Poisson fluctuations in scatter multiplicity, these ceilings scale logarithmically with mass for heavy dark matter and often lie in regions probed by multiscatter searches. Using a generalized formula for single-scatter event rates we recast WIMP searches by the quintal-to-tonne…
▽ More
We identify the maximum cross sections probed by single-scatter ``WIMP" searches in dark matter direct detection. Due to Poisson fluctuations in scatter multiplicity, these ceilings scale logarithmically with mass for heavy dark matter and often lie in regions probed by multiscatter searches. Using a generalized formula for single-scatter event rates we recast WIMP searches by the quintal-to-tonne scale detectors XENON1T, XENONnT, LZ, PANDAX-II, PANDAX-4T, DarkSide-50 and DEAP-3600 to obtain ceilings and floors up to a few $10^{17}$ GeV mass and $10^{-22}$ cm$^2$ per-nucleus cross section. We do this for coherent, geometric, isospin-violating xenophobic and argophobic spin-independent scattering, and neutron-only and proton-only spin-dependent scattering. Future large-exposure detectors would register an almost irreducible background of atmospheric neutrinos that would determine a dark matter sensitivity ceiling that we call the ``neutrino roof", in analogy with the well-studied ``neutrino floor". Accounting for this background, we estimate the reaches of the 10$-$100 tonne scale DarkSide-20k, DARWIN/XLZD, PANDAX-xT, and Argo, which would probe many decades of unconstrained parameter space up to the Planck mass, as well as of $10^3-10^4$ tonne scale noble liquid detectors that have been proposed in synergy with neutrino experiments.
△ Less
Submitted 24 June, 2024;
originally announced June 2024.
-
Determining the nanoflare heating frequency of an X-ray Bright Point observed by MaGIXS
Authors:
Biswajit Mondal,
P. S. Athiray,
Amy R. Winebarger,
Sabrina L. Savage,
Ken Kobayashi,
Stephen Bradshaw,
Will Barnes,
Patrick R. Champey,
Peter Cheimets,
Jaroslav Dudik,
Leon Golub,
Helen E. Mason,
David E. McKenzie,
Christopher S. Moore,
Chad Madsen,
Katharine K. Reeves,
Paola Testa,
Genevieve D. Vigil,
Harry P. Warren,
Robert W. Walsh,
Giulio Del Zanna
Abstract:
Nanoflares are thought to be one of the prime candidates that can heat the solar corona to its multi-million kelvin temperature. Individual nanoflares are difficult to detect with the present generation instruments, however their presence can be inferred by comparing simulated nanoflare-heated plasma emissions with the observed emission. Using HYDRAD coronal loop simulations, we model the emission…
▽ More
Nanoflares are thought to be one of the prime candidates that can heat the solar corona to its multi-million kelvin temperature. Individual nanoflares are difficult to detect with the present generation instruments, however their presence can be inferred by comparing simulated nanoflare-heated plasma emissions with the observed emission. Using HYDRAD coronal loop simulations, we model the emission from an X-ray bright point (XBP) observed by the Marshall Grazing Incidence X-ray Spectrometer (MaGIXS), along with nearest-available observations from the Atmospheric Imaging Assembly (AIA) onboard Solar Dynamics Observatory (SDO) and X-Ray Telescope (XRT) onboard Hinode observatory. The length and magnetic field strength of the coronal loops are derived from the linear-force-free extrapolation of the observed photospheric magnetogram by Helioseismic and Magnetic Imager (HMI) onboard SDO. Each loop is assumed to be heated by random nanoflares, whose magnitude and frequency are determined by the loop length and magnetic field strength. The simulation results are then compared and matched against the measured intensity from AIA, XRT, and MaGIXS. Our model results indicate the observed emissions from the XBP under study could be well matched by a distribution of nanoflares with average delay times 1500 s to 3000 s, which suggest that the heating is dominated by high-frequency events. Further, we demonstrate the high sensitivity of MaGIXS and XRT to diagnose the heating frequency using this method, while AIA passbands are found to be the least sensitive.
△ Less
Submitted 7 February, 2024;
originally announced February 2024.
-
Multi-wavelength observations of a B-class flare using XSM, AIA, and XRT
Authors:
Yamini K. Rao,
B. Mondal,
Giulio Del Zanna,
N. P. S. Mithun,
S. V. Vadawale,
K. K. Reeves,
Helen E. Mason,
Anil Bhardwaj
Abstract:
We present multi-wavelength observations by Chandrayaan-2/XSM, SDO/AIA and Hinode/XRT of a B-class flare observed on 25th February, 2021, originating from an active region (AR 12804) near the North-West limb. The microflare lasts for approx 30 mins and is composed of hot loops reaching temperatures of 10 MK. We report excellent agreement (within 20 percent) for the average effective temperatures o…
▽ More
We present multi-wavelength observations by Chandrayaan-2/XSM, SDO/AIA and Hinode/XRT of a B-class flare observed on 25th February, 2021, originating from an active region (AR 12804) near the North-West limb. The microflare lasts for approx 30 mins and is composed of hot loops reaching temperatures of 10 MK. We report excellent agreement (within 20 percent) for the average effective temperatures obtained at the flare peak from all the three instruments, which have different temperature sensitivities. The XRT filter combination of Be-thin and Be-med provides an excellent opportunity to measure the high-temperatures in such microflare events. The elemental abundances during the evolution of the microflare are also studied and observed to drop towards photospheric values at the flare peak time, compared to coronal values during the rise and decay phase. This is consistent with previous XSM studies.
△ Less
Submitted 28 August, 2023;
originally announced August 2023.
-
Coronal Elemental Abundances during A-class Solar Flares Observed by Chandrayaan-2 XSM
Authors:
Lakshitha Nama,
Biswajit Mondal,
S Narendranath,
KT Paul
Abstract:
The abundances of low First Ionisation Potential (FIP) elements are three to four times higher (FIP bias) in the closed loop active corona than in the photosphere, known as the FIP effect. Observations suggest that the abundances vary in different coronal structures. Here, we use the soft X-ray spectroscopic measurements from the Solar X-ray Monitor (XSM) on board the Chandrayaan-2 orbiter to stud…
▽ More
The abundances of low First Ionisation Potential (FIP) elements are three to four times higher (FIP bias) in the closed loop active corona than in the photosphere, known as the FIP effect. Observations suggest that the abundances vary in different coronal structures. Here, we use the soft X-ray spectroscopic measurements from the Solar X-ray Monitor (XSM) on board the Chandrayaan-2 orbiter to study the FIP effect in multiple A-class flares observed during the minimum of solar cycle 24. Using time-integrated spectral analysis, we derive the average temperature, emission measure, and the abundances of four elements - Mg, Al, Si, and S. We find that the temperature and emission measure scales with the flares sub-class while the measured abundances show an intermediate FIP bias for the lower A-flares (e.g., A1), while for the higher A-flares, the FIP bias is near unity. To investigate it further, we perform a time-resolved spectral analysis for a sample of the A-class flares and examine the evolution of temperature, emission measure, and abundances. We find that the abundances drop from the coronal values towards their photospheric values in the impulsive phase of the flares, and after the impulsive phase, they quickly return to the usual coronal values. The transition of the abundances from the coronal to photospheric values in the impulsive phase of the flares indicates the injection of fresh unfractionated material from the lower solar atmosphere to the corona due to chromospheric evaporation. However, explaining the quick recovery of the abundances from the photospheric to coronal values in the decay phase of the flare is challenging.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Evolution of elemental abundances in hot active region cores from Chandrayaan-2 XSM observations
Authors:
Biswajit Mondal,
Santosh V. Vadawale,
Giulio Del Zanna,
N. P. S. Mithun,
Aveek Sarkar,
Helen E. Mason,
P. Janardhan,
Anil Bhardwaj
Abstract:
The First Ionization Potential (FIP) bias, whereby elemental abundances for low FIP elements in different coronal structures vary from their photospheric values and may also vary with time, has been widely studied. In order to study the temporal variation, and to understand the physical mechanisms giving rise to the FIP bias, we have investigated the hot cores of three ARs using disk-integrated so…
▽ More
The First Ionization Potential (FIP) bias, whereby elemental abundances for low FIP elements in different coronal structures vary from their photospheric values and may also vary with time, has been widely studied. In order to study the temporal variation, and to understand the physical mechanisms giving rise to the FIP bias, we have investigated the hot cores of three ARs using disk-integrated soft X-ray spectroscopic observation with the Solar X-ray Monitor (XSM) onboard Chandrayaan-2. Observations for periods when only one AR was present on the solar disk were used so as to ensure that the AR was the principal contributor to the total X-ray intensity. The average values of temperature and EM were ~3 MK and 3.0E46/cm3 respectively. Regardless of the age and activity of the AR, the elemental abundances of the low FIP elements, Al, Mg, and Si were consistently higher than their photospheric values. The average FIP bias for Mg and Si was ~3, whereas the FIP bias for the mid-FIP element, S, was ~1.5. However, the FIP bias for the lowest FIP element, Al, was observed to be higher than 3, which, if real, suggests a dependence of the FIP bias of low FIP elements on their FIP value. Another major result from our analysis is that the FIP bias of these elements is established in within ~10 hours of emergence of the AR and then remains almost constant throughout its lifetime.
△ Less
Submitted 6 June, 2023; v1 submitted 9 January, 2023;
originally announced January 2023.
-
Role of small-scale impulsive events in heating the X-ray bright points of the quiet Sun
Authors:
Biswajit Mondal,
James A Klimchuk,
Santosh V. Vadawale,
Aveek Sarkar,
Giulio Del Zanna,
P. S. Athiray,
N. P. S. Mithun,
Helen E. Mason,
A. Bhardwaj
Abstract:
Small-scale impulsive events, known as nanoflares, are thought to be one of the prime candidates that can keep the solar corona hot at its multi-million Kelvin temperature. Individual nanoflares are difficult to detect with the current generation instruments; however, their presence can be inferred through indirect techniques such as a Differential Emission Measure (DEM) analysis. Here we employ t…
▽ More
Small-scale impulsive events, known as nanoflares, are thought to be one of the prime candidates that can keep the solar corona hot at its multi-million Kelvin temperature. Individual nanoflares are difficult to detect with the current generation instruments; however, their presence can be inferred through indirect techniques such as a Differential Emission Measure (DEM) analysis. Here we employ this technique to investigate the possibility of nanoflare heating of the quiet corona during the minimum of solar cycle 24. During this minimum, active regions (ARs) were absent on the solar-disk for extended periods. In the absence of ARs, X-ray bright points (XBP) are the dominant contributor to disk-integrated X-rays. We estimate the DEM of the XBPs using observations from the Solar X-ray Monitor (XSM) onboard the Chandrayaan-2 orbiter and the Atmospheric Imaging Assembly (AIA) onboard the Solar Dynamic Observatory. XBPs consist of small-scale loops associated with bipolar magnetic fields. We simulate such XBP loops using the EBTEL hydrodynamic code. The lengths and magnetic field strengths of these loops are obtained through a potential field extrapolation of the photospheric magnetogram. Each loop is assumed to be heated by random nanoflares having an energy that depends on the loop properties. The composite nanoflare energy distribution for all the loops has a power-law slope close to -2.5. The simulation output is then used to obtain the integrated DEM. It agrees remarkably well with the observed DEM at temperatures above 1 MK, suggesting that the nanoflare distribution, as predicted by our model, can explain the XBP heating.
△ Less
Submitted 6 January, 2023;
originally announced January 2023.
-
Soft X-ray Spectral Diagnostics of Multi-thermal Plasma in Solar Flares with Chandrayaan-2 XSM
Authors:
N. P. S. Mithun,
Santosh V. Vadawale,
Giulio Del Zanna,
Yamini K. Rao,
Bhuwan Joshi,
Aveek Sarkar,
Biswajit Mondal,
P. Janardhan,
Anil Bhardwaj,
Helen E. Mason
Abstract:
Spectroscopic observations in X-ray wavelengths provide excellent diagnostics of the temperature distribution in solar flare plasma. The Solar X-ray Monitor (XSM) onboard the Chandrayaan-2 mission provides broad-band disk integrated soft X-ray solar spectral measurements in the energy range of 1-15 keV with high spectral resolution and time cadence. In this study, we analyse X-ray spectra of three…
▽ More
Spectroscopic observations in X-ray wavelengths provide excellent diagnostics of the temperature distribution in solar flare plasma. The Solar X-ray Monitor (XSM) onboard the Chandrayaan-2 mission provides broad-band disk integrated soft X-ray solar spectral measurements in the energy range of 1-15 keV with high spectral resolution and time cadence. In this study, we analyse X-ray spectra of three representative GOES C-class flares obtained with the XSM to investigate the evolution of various plasma parameters during the course of the flares. Using the soft X-ray spectra consisting of the continuum and well-resolved line complexes of major elements like Mg, Si, and Fe, we investigate the validity of the isothermal and multi-thermal assumptions on the high temperature components of the flaring plasma. We show that the soft X-ray spectra during the impulsive phase of the high intensity flares are inconsistent with isothermal models and are best fitted with double peaked differential emission measure distributions where the temperature of the hotter component rises faster than that of the cooler component. The two distinct temperature components observed in DEM models during the impulsive phase of the flares suggest the presence of the directly heated plasma in the corona and evaporated plasma from the chromospheric footpoints. We also find that the abundances of low FIP elements Mg, Si, and Fe reduces from near coronal to near photospheric values during the rising phase of the flare and recovers back to coronal values during decay phase, which is also consistent with the chromospheric evaporation scenario.
△ Less
Submitted 7 October, 2022;
originally announced October 2022.
-
Multi-wavelength observations by XSM, Hinode and SDO of an active region. Chemical abundances and temperatures
Authors:
G. Del Zanna,
B. Mondal,
Y. K. Rao,
N. P. S. Mithun,
S. V. Vadawale,
K. K. Reeves,
H. E. Mason,
A. Sarkar,
P. Janardhan,
A. Bhardwaj
Abstract:
We have reviewed the first year of observations of the Solar X-ray Monitor (XSM) onboard Chandrayaan-2, and the available multi-wavelength observations to complement the XSM data, focusing on Solar Dynamics Observatory AIA and Hinode XRT, EIS observations. XSM has provided disk-integrated solar spectra in the 1--15 keV energy range, observing a large number of microflares. We present an analysis o…
▽ More
We have reviewed the first year of observations of the Solar X-ray Monitor (XSM) onboard Chandrayaan-2, and the available multi-wavelength observations to complement the XSM data, focusing on Solar Dynamics Observatory AIA and Hinode XRT, EIS observations. XSM has provided disk-integrated solar spectra in the 1--15 keV energy range, observing a large number of microflares. We present an analysis of multi-wavelength observations of AR 12759 during its disk crossing. We use a new radiometric calibration of EIS to find that the quiescent AR core emission during its disk crossing has a distribution of temperatures and chemical abundances that does not change significantly over time. An analysis of the XSM spectra confirms the EIS results, and shows that the low First Ionization Potential (FIP) elements are enhanced, compared to their photospheric values. The frequent microflares produced by the AR did not affect the abundances of the quiescent AR core. We also present an analysis of one of the flares it produced, SOL2020-04-09T09:32. The XSM analysis indicates isothermal temperatures reaching 6 MK. The lack of very high-T emission is confirmed by AIA. We find excellent agreement between the observed XSM spectrum and the one predicted using an AIA DEM analysis. In contrast, the XRT Al-Poly / Be-thin filter ratio gives lower temperatures for the quiescent and flaring phases. We show that this is due to the sensitivity of this ratio to low temperatures, as the XRT filter ratios predicted with a DEM analysis based on EIS and AIA gives values in good agreement with the observed ones.
△ Less
Submitted 14 July, 2022;
originally announced July 2022.
-
Evolution of Elemental Abundances During B-Class Solar Flares: Soft X-ray Spectral Measurements with Chandrayaan-2 XSM
Authors:
Biswajit Mondal,
Aveek Sarkar,
Santosh V. Vadawale,
N. P. S. Mithun,
P. Janardhan,
Giulio Del Zanna,
Helen E. Mason,
Urmila Mitra-Kraev,
S. Narendranath
Abstract:
The Solar X-ray Spectrometer (XSM) payload onboard Chandrayaan-2 provides disk-integrated solar spectra in the 1-15 keV energy range with an energy resolution of 180 eV (at 5.9 keV) and a cadence of 1~second. During the period from September 2019 to May 2020, covering the minimum of Solar Cycle 24, it observed nine B-class flares ranging from B1.3 to B4.5. Using time-resolved spectroscopic analysi…
▽ More
The Solar X-ray Spectrometer (XSM) payload onboard Chandrayaan-2 provides disk-integrated solar spectra in the 1-15 keV energy range with an energy resolution of 180 eV (at 5.9 keV) and a cadence of 1~second. During the period from September 2019 to May 2020, covering the minimum of Solar Cycle 24, it observed nine B-class flares ranging from B1.3 to B4.5. Using time-resolved spectroscopic analysis during these flares, we examined the evolution of temperature, emission measure, and absolute elemental abundances of four elements -- Mg, Al, Si, and S. These are the first measurements of absolute abundances during such small flares and this study offers a unique insight into the evolution of absolute abundances as the flares evolve. Our results demonstrate that the abundances of these four elements decrease towards their photospheric values during the peak phase of the flares. During the decay phase, the abundances are observed to quickly return to their pre-flare coronal values. The depletion of elemental abundances during the flares is consistent with the standard flare model, suggesting the injection of fresh material into coronal loops as a result of chromospheric evaporation. To explain the quick recovery of the so-called coronal "First Ionization Potential (FIP) bias" we propose two scenarios based on the Ponderomotive force model.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
Observations of the Quiet Sun During the Deepest Solar Minimum of the Past Century with Chandrayaan-2 XSM -- Sub-A Class Microflares Outside Active Regions
Authors:
Santosh V. Vadawale,
N. P. S. Mithun,
Biswajit Mondal,
Aveek Sarkar,
P. Janardhan,
Bhuwan Joshi,
Anil Bhardwaj,
M. Shanmugam,
Arpit R. Patel,
Hitesh Kumar L. Adalja,
Shiv Kumar Goyal,
Tinkal Ladiya,
Neeraj Kumar Tiwari,
Nishant Singh,
Sushil Kumar
Abstract:
Solar flares, with energies ranging over several orders of magnitude, result from impulsive release of energy due to magnetic reconnection in the corona. Barring a handful, almost all microflares observed in X-rays are associated with the solar active regions. Here we present, for the first time, a comprehensive analysis of a large sample of quiet Sun microflares observed in soft X-rays by the Sol…
▽ More
Solar flares, with energies ranging over several orders of magnitude, result from impulsive release of energy due to magnetic reconnection in the corona. Barring a handful, almost all microflares observed in X-rays are associated with the solar active regions. Here we present, for the first time, a comprehensive analysis of a large sample of quiet Sun microflares observed in soft X-rays by the Solar X-ray Monitor (XSM) on board the Chandrayaan-2 mission during the 2019-20 solar minimum. A total of 98 microflares having peak flux below GOES A-level were observed by the XSM during observations spanning 76 days. By using the derived plasma temperature and emission measure of these events obtained by fitting the XSM spectra along with volume estimates from concurrent imaging observations in EUV with the Solar Dynamics Observatory/Atmospheric Imaging Assembly (SDO/AIA), we estimated their thermal energies to be ranging from 3e26 to 6e27 erg. We present the frequency distribution of the quiet Sun microflares with energy and discuss the implications of these observations of small-scale magnetic reconnection events outside active regions on coronal heating.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
Observations of the Quiet Sun During the Deepest Solar Minimum of the Past Century with Chandrayaan-2 XSM -- Elemental Abundances in the Quiescent Corona
Authors:
Santosh V. Vadawale,
Biswajit Mondal,
N. P. S. Mithun,
Aveek Sarkar,
P. Janardhan,
Bhuwan Joshi,
Anil Bhardwaj,
M. Shanmugam,
Arpit R. Patel,
Hitesh Kumar L. Adalja,
Shiv Kumar Goyal,
Tinkal Ladiya,
Neeraj Kumar Tiwari,
Nishant Singh,
Sushil Kumar
Abstract:
Elements with low First Ionization Potential (FIP) are known to be three to four times more abundant in active region loops of the solar corona than in the photosphere. There have been observations suggesting that this observed "FIP bias" may be different in other parts of the solar corona and such observations are thus important in understanding the underlying mechanism. The Solar X-ray Monitor (…
▽ More
Elements with low First Ionization Potential (FIP) are known to be three to four times more abundant in active region loops of the solar corona than in the photosphere. There have been observations suggesting that this observed "FIP bias" may be different in other parts of the solar corona and such observations are thus important in understanding the underlying mechanism. The Solar X-ray Monitor (XSM) on board the Chandrayaan-2 mission carried out spectroscopic observations of the Sun in soft X-rays during the 2019-20 solar minimum, considered to be the quietest solar minimum of the past century. These observations provided a unique opportunity to study soft X-ray spectra of the quiescent solar corona in the absence of any active regions. By modelling high resolution broadband X-ray spectra from XSM, we estimate the temperature and emission measure during periods of possibly the lowest solar X-ray intensity. We find that the derived parameters remain nearly constant over time with a temperature around 2 MK, suggesting the emission is dominated by X-ray Bright Points (XBPs). We also obtain the abundances of Mg, Al, and Si relative to H, and find that the FIP bias is ~2, lower than the values observed in active regions.
△ Less
Submitted 30 March, 2021;
originally announced March 2021.
-
DarpanX: A Python Package for Modeling X-ray Reflectivity of Multilayer Mirrors
Authors:
Biswajit Mondal,
Santosh V. Vadawale,
N. P. S. Mithun,
C. S. Vaishnava,
Neeraj K. Tiwari,
S. K. Goyal,
Singam S. Panini,
Vinita Navalkar,
Chiranjit Karmakar,
Mansukhlal R. Patel,
R. B. Upadhyay
Abstract:
Multilayer X-ray mirrors consist of a coating of a large number of alternate layers of high Z and low Z materials with a typical thickness of 10-100 Angstrom, on a suitable substrate. Such coatings play an important role in enhancing the reflectivity of X-ray mirrors by allowing reflections at angles much larger than the critical angle of X-ray reflection for the given materials. Coating with an e…
▽ More
Multilayer X-ray mirrors consist of a coating of a large number of alternate layers of high Z and low Z materials with a typical thickness of 10-100 Angstrom, on a suitable substrate. Such coatings play an important role in enhancing the reflectivity of X-ray mirrors by allowing reflections at angles much larger than the critical angle of X-ray reflection for the given materials. Coating with an equal thickness of each bilayer enhances the reflectivity at discrete energies, satisfying Bragg condition. However, by systematically varying the bilayer thickness in the multilayer stack, it is possible to design X-ray mirrors having enhanced reflectivity over a broad energy range. One of the most important applications of such a depth graded multilayer mirror is to realize hard X-ray telescopes for astronomical purposes. Design of such multilayer X-ray mirrors and their characterization with X-ray reflectivity measurements require appropriate software tools. We have initiated the development of hard X-ray optics for future Indian X-ray astronomical missions, and in this context, we have developed a program, DarpanX, to calculate X-ray reflectivity for single and multilayer mirrors. It can be used as a stand-alone tool for designing multilayer mirrors with required characteristics. But more importantly, it has been implemented as a local model for the popular X-ray spectral fitting program, XSPEC, and thus can be used for accurate fitting of the experimentally measured X-ray reflectivity data. DarpanX is implemented as a Python 3 module, and an API is provided to access the underlying algorithms. Here we present details of DarpanX implementation and its validation for different type multilayer structures. We also demonstrate the model fitting capability of DarpanX for experimental X-ray reflectivity measurements of single and multilayer samples.
△ Less
Submitted 7 January, 2021;
originally announced January 2021.
-
Solar X-ray Monitor On Board the Chandrayaan-2 Orbiter: In-flight Performance and Science Prospects
Authors:
N. P. S. Mithun,
Santosh V. Vadawale,
Aveek Sarkar,
M. Shanmugam,
Arpit R. Patel,
Biswajit Mondal,
Bhuwan Joshi,
Janardhan P.,
Hiteshkumar L. Adalja,
Shiv Kumar Goyal,
Tinkal Ladiya,
Neeraj Kumar Tiwari,
Nishant Singh,
Sushil Kumar,
Manoj K. Tiwari,
M. H. Modi,
Anil Bhardwaj
Abstract:
The Solar X-ray Monitor (abbreviated as XSM) on board India's Chandrayaan-2 mission is designed to carry out broadband spectroscopy of the Sun from lunar orbit. It observes the Sun as a star and measures the spectrum every second in the soft X-ray band of 1 - 15 keV with an energy resolution better than 180 eV at 5.9 keV. The primary objective of the XSM is to provide the incident solar spectrum f…
▽ More
The Solar X-ray Monitor (abbreviated as XSM) on board India's Chandrayaan-2 mission is designed to carry out broadband spectroscopy of the Sun from lunar orbit. It observes the Sun as a star and measures the spectrum every second in the soft X-ray band of 1 - 15 keV with an energy resolution better than 180 eV at 5.9 keV. The primary objective of the XSM is to provide the incident solar spectrum for the X-ray fluorescence spectroscopy experiment on the Chandrayaan-2 orbiter, which aims to generate elemental abundance maps of the lunar surface. However, observations with the XSM can independently be used to study the Sun as well. The Chandrayaan-2 mission was launched on 22 July 2019, and the XSM began nominal operations, in lunar orbit, from September 2019. The in-flight observations, so far, have shown that its spectral performance has been identical to that on the ground. Measurements of the effective area from ground calibration were found to require some refinement, which has been carried out using solar observations at different incident angles. It also has been shown that the XSM is sensitive enough to detect solar activity well below A-class. This makes the investigations of microflares and the quiet solar corona feasible in addition to the study of the evolution of physical parameters during intense flares. This article presents the in-flight performance and calibration of the XSM instrument and discusses some specific science cases that can be addressed using observations with the XSM.
△ Less
Submitted 21 September, 2020;
originally announced September 2020.
-
Ground Calibration of Solar X-ray Monitor On-board Chandrayaan-2 Orbiter
Authors:
N. P. S. Mithun,
Santosh V. Vadawale,
M. Shanmugam,
Arpit R. Patel,
Neeraj Kumar Tiwari,
Hiteshkumar L. Adalja,
Shiv Kumar Goyal,
Tinkal Ladiya,
Nishant Singh,
Sushil Kumar,
Manoj K. Tiwari,
M. H. Modi,
Biswajit Mondal,
Aveek Sarkar,
Bhuwan Joshi,
P. Janardhan,
Anil Bhardwaj
Abstract:
Chandrayaan-2, the second Indian mission to the Moon, carries a spectrometer called the Solar X-ray Monitor (XSM) to perform soft X-ray spectral measurements of the Sun while a companion payload measures the fluorescence emission from the Moon. Together these two payloads will provide quantitative estimates of elemental abundances on the lunar surface. XSM is also expected to provide significant c…
▽ More
Chandrayaan-2, the second Indian mission to the Moon, carries a spectrometer called the Solar X-ray Monitor (XSM) to perform soft X-ray spectral measurements of the Sun while a companion payload measures the fluorescence emission from the Moon. Together these two payloads will provide quantitative estimates of elemental abundances on the lunar surface. XSM is also expected to provide significant contributions to the solar X-ray studies with its highest time cadence and energy resolution spectral measurements. For this purpose, the XSM employs a Silicon Drift Detector and carries out energy measurements of incident photons in the 1 -- 15 keV range with a resolution of less than 180 eV at 5.9 keV, over a wide range of solar X-ray intensities. Extensive ground calibration experiments have been carried out with the XSM using laboratory X-ray sources as well as X-ray beam-line facilities to determine the instrument response matrix parameters required for quantitative spectral analysis. This includes measurements of gain, spectral redistribution function, and effective area, under various observing conditions. The capability of the XSM to maintain its spectral performance at high incident flux as well as the dead-time and pile-up characteristics have also been investigated. The results of these ground calibration experiments of the XSM payload are presented in this article.
△ Less
Submitted 14 July, 2020;
originally announced July 2020.
