-
Optimising spectroscopic observations of transiting exoplanets
Authors:
Linn Boldt-Christmas,
Fabio Lesjak,
Ansgar Wehrhahn,
Nikolai Piskunov,
Adam D. Rains,
Lisa Nortmann,
Oleg Kochukhov
Abstract:
When observing the atmospheres of transiting exoplanets using high-resolution spectroscopy, one aims to detect well-resolved spectral features with high signal-to-noise ratios (SNR) as is possible today with modern spectrographs. However, obtaining such high-quality observations comes with a trade-off: a lower cadence of fewer, longer exposures across the transit collects more photons thanks to re…
▽ More
When observing the atmospheres of transiting exoplanets using high-resolution spectroscopy, one aims to detect well-resolved spectral features with high signal-to-noise ratios (SNR) as is possible today with modern spectrographs. However, obtaining such high-quality observations comes with a trade-off: a lower cadence of fewer, longer exposures across the transit collects more photons thanks to reduced overheads, enhancing the SNR of each observation, while a higher cadence of several, shorter exposures minimises spectral feature smearing due to the continuously changing radial velocity of the planet.
Considering that maximising SNR and minimising smearing are both beneficial to analysis, there is a need to establish where the optimal compromise lies. In this work, we model real transit events based on targets as they would be observed with VLT/CRIRES+ at Paranal Observatory. Creating four hypothetical scenarios, we simulate each observation across 100 realisations of the same transit event in order to vary the time resolution only. We remove telluric and stellar lines using the SYSREM algorithm and analyse them through cross-correlation with model templates, measuring how successfully each time resolution and case detects the planetary signal.
We demonstrate that there is a continuous change in the detection significance based on time resolutions, and that the function of this significance has clear maxima. The strength and location of this maxima varies on e.g. planet system parameters, instrumentation, and no. of removal iterations. We discuss why observers should therefore take several factors into account, using a strategy akin to the 'exposure triangle' from traditional photography where a balance must be struck by considering the full context of the observation. Our method is robust and may be employed by observers to estimate best observational strategies for other targets.
△ Less
Submitted 13 December, 2023;
originally announced December 2023.
-
CRIRES$^{+}$ on sky at the ESO Very Large Telescope
Authors:
R. J. Dorn,
P. Bristow,
J. V. Smoker,
F. Rodler,
A. Lavail,
M. Accardo,
M. van den Ancker,
D. Baade,
A. Baruffolo,
B. Courtney-Barrer,
L. Blanco,
A. Brucalassi,
C. Cumani,
R. Follert,
A. Haimerl,
A. Hatzes,
M. Haug,
U. Heiter,
R. Hinterschuster,
N. Hubin,
D. J. Ives,
Y. Jung,
M. Jones,
J-P. Kirchbauer,
B. Klein
, et al. (27 additional authors not shown)
Abstract:
The CRyogenic InfraRed Echelle Spectrograph (CRIRES) Upgrade project CRIRES$^{+}$ extended the capabilities of CRIRES. It transformed this VLT instrument into a cross-dispersed spectrograph to increase the wavelength range that is covered simultaneously by up to a factor of ten. In addition, a new detector focal plane array of three Hawaii 2RG detectors with a 5.3 $μ$m cutoff wavelength replaced t…
▽ More
The CRyogenic InfraRed Echelle Spectrograph (CRIRES) Upgrade project CRIRES$^{+}$ extended the capabilities of CRIRES. It transformed this VLT instrument into a cross-dispersed spectrograph to increase the wavelength range that is covered simultaneously by up to a factor of ten. In addition, a new detector focal plane array of three Hawaii 2RG detectors with a 5.3 $μ$m cutoff wavelength replaced the existing detectors. Amongst many other improvements, a new spectropolarimetric unit was added and the calibration system has been enhanced. The instrument was installed at the VLT on Unit Telescope 3 at the beginning of 2020 and successfully commissioned and verified for science operations during 2021, partly remotely from Europe due to the COVID-19 pandemic. The instrument was subsequently offered to the community from October 2021 onwards. This article describes the performance and capabilities of the upgraded instrument and presents on sky results.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
PySME -- Spectroscopy Made Easier
Authors:
Ansgar Wehrhahn,
Nikolai Piskunov,
Tanja Ryabchikova
Abstract:
The characterization of exoplanet requires reliable determination of the fundamental parameters of their host stars. Spectral fitting plays an important role in this process. For the majority of stellar parameters matching synthetic spectra to the observations provides a robust and unique solution for fundamental parameters, such as effective temperature, surface gravity, abundances, radial and ro…
▽ More
The characterization of exoplanet requires reliable determination of the fundamental parameters of their host stars. Spectral fitting plays an important role in this process. For the majority of stellar parameters matching synthetic spectra to the observations provides a robust and unique solution for fundamental parameters, such as effective temperature, surface gravity, abundances, radial and rotational velocities and others. Here we present a new software package for fitting high resolution stellar spectra that is easy to use, available for common platforms and free from commercial licenses. We call it PySME. It is based on the proven Spectroscopy Made Easy (later referred to as IDL SME or "original SME") package. The IDL part of the original SME code has been rewritten in Python, but we kept the efficient C++ and FORTRAN code responsible for molecular-ionization equilibrium, opacities and spectral synthesis. In the process we have updated some components of the optimization procedure offering more flexibility and better analysis of the convergence. The result is a more modern package with the same functionality of the original SME. We apply PySME to a few stars of different spectral types and compared the derived fundamental parameters with the results from IDL SME and other techniques. We show that PySME works at least as well as the original SME.
△ Less
Submitted 6 December, 2022; v1 submitted 10 October, 2022;
originally announced October 2022.
-
Non-LTE abundance corrections for late-type stars from 2000Å to 3μm: I. Na, Mg, and Al
Authors:
K. Lind,
T. Nordlander,
A. Wehrhahn,
M. Montelius,
Y. Osorio,
P. S. Barklem,
M. Afsar,
C. Sneden,
C. Kobayashi
Abstract:
It is well known that cool star atmospheres depart from local thermodynamic equilibrium (LTE). Accurate abundance determination requires taking those effects into account, but the necessary non-LTE calculations are often lacking. Our goal is to provide detailed estimates of NLTE effects for FGK type stars for all spectral lines from the ultraviolet to the infrared that are potentially useful as ab…
▽ More
It is well known that cool star atmospheres depart from local thermodynamic equilibrium (LTE). Accurate abundance determination requires taking those effects into account, but the necessary non-LTE calculations are often lacking. Our goal is to provide detailed estimates of NLTE effects for FGK type stars for all spectral lines from the ultraviolet to the infrared that are potentially useful as abundance diagnostics. The first paper in this series focusses on the light elements Na, Mg and Al. The code PySME is used to compute curves-of-growth for 2158 MARCS model atmospheres in a wide parameter range. Nine abundance points are used to construct individual line curves-of-growth by calculating the equivalent widths of 35 Na lines, 134 Mg lines, and 34 Al lines. The lines are selected from the ultra-violet to the near infrared wavelength range. We demonstrate the power of the new grids with LTE and NLTE abundance analysis by means of equivalent width measurements of five benchmark stars; the Sun, Arcturus, HD84937, HD140283 and HD122563. For Na, the NLTE abundances are lower than in LTE and show markedly reduced line-to-line scatter in the metal-poor stars. For Mg, we confirm previous reports of a significant 0.25 dex LTE ionization imbalance in metal-poor stars that is only slightly improved in NLTE (0.18 dex). LTE abundances based on Mg II lines agree better with models of Galactic chemical evolution. For Al, NLTE calculations strongly reduce a 0.6 dex ionization imbalance seen in LTE for the metal-poor stars. The abundance corrections presented in this work are in good agreement with previous studies for the subset of lines that overlap, except for strongly saturated lines.
△ Less
Submitted 22 June, 2022;
originally announced June 2022.
-
The GALAH Survey: Non-LTE departure coefficients for large spectroscopic surveys
Authors:
A. M. Amarsi,
K. Lind,
Y. Osorio,
T. Nordlander,
M. Bergemann,
H. Reggiani,
E. X. Wang,
S. Buder,
M. Asplund,
P. S. Barklem,
A. Wehrhahn,
Á. Skúladóttir,
C. Kobayashi,
A. I. Karakas,
X. D. Gao,
J. Bland-Hawthorn,
G. M. De Silva,
J. Kos,
G. F. Lewis,
S. L. Martell,
S. Sharma,
J. D. Simpson,
D. B. Zucker,
K. Čotar,
J. Horner
, et al. (1 additional authors not shown)
Abstract:
Massive sets of stellar spectroscopic observations are rapidly becoming available and these can be used to determine the chemical composition and evolution of the Galaxy with unprecedented precision. One of the major challenges in this endeavour involves constructing realistic models of stellar spectra with which to reliably determine stellar abundances. At present, large stellar surveys commonly…
▽ More
Massive sets of stellar spectroscopic observations are rapidly becoming available and these can be used to determine the chemical composition and evolution of the Galaxy with unprecedented precision. One of the major challenges in this endeavour involves constructing realistic models of stellar spectra with which to reliably determine stellar abundances. At present, large stellar surveys commonly use simplified models that assume that the stellar atmospheres are approximately in local thermodynamic equilibrium (LTE). To test and ultimately relax this assumption, we have performed non-LTE calculations for $13$ different elements (H, Li, C, N, O, Na, Mg, Al, Si, K, Ca, Mn, and Ba), using recent model atoms that have physically-motivated descriptions for the inelastic collisions with neutral hydrogen, across a grid of $3756$ 1D MARCS model atmospheres that spans $3000\leq T_{\mathrm{eff}}/\mathrm{K}\leq8000$, $-0.5\leq\log{g/\mathrm{cm\,s^{-2}}}\leq5.5$, and $-5\leq\mathrm{[Fe/H]}\leq1$. We present the grids of departure coefficients that have been implemented into the GALAH DR3 analysis pipeline in order to complement the extant non-LTE grid for iron. We also present a detailed line-by-line re-analysis of $50126$ stars from GALAH DR3. We found that relaxing LTE can change the abundances by between $-0.7\,\mathrm{dex}$ and $+0.2\,\mathrm{dex}$ for different lines and stars. Taking departures from LTE into account can reduce the dispersion in the $\mathrm{[A/Fe]}$ versus $\mathrm{[Fe/H]}$ plane by up to $0.1\,\mathrm{dex}$, and it can remove spurious differences between the dwarfs and giants by up to $0.2\,\mathrm{dex}$. The resulting abundance slopes can thus be qualitatively different in non-LTE, possibly with important implications for the chemical evolution of our Galaxy.
△ Less
Submitted 21 August, 2020;
originally announced August 2020.
-
Optimal extraction of echelle spectra: getting the most from observations
Authors:
Nikolai Piskunov,
Ansgar Wehrhahn,
Thomas Marquart
Abstract:
The price of instruments and observing time on modern telescopes is quickly increasing with the size of the primary mirror. Therefore, it is worth revisiting the data reduction algorithms to extract every bit of scientific information from observations. Echelle spectrographs are typical instruments in high-resolution spectroscopy, but attempts to improve the wavelength coverage and versatility of…
▽ More
The price of instruments and observing time on modern telescopes is quickly increasing with the size of the primary mirror. Therefore, it is worth revisiting the data reduction algorithms to extract every bit of scientific information from observations. Echelle spectrographs are typical instruments in high-resolution spectroscopy, but attempts to improve the wavelength coverage and versatility of these instruments results in a complicated and variable footprint of the entrance slit projection onto the science detector. Traditional spectral extraction methods fail to perform a truly optimal extraction, when the slit image is not aligned with the detector columns but instead is tilted or even curved.
We here present the mathematical algorithms and examples of their application to the optimal extraction and the following reduction steps for echelle spectrometers equipped with an entrance slit, that is imaged with various distortions, such as variable tilt and curvature. The new method minimizes the loss of spectral resolution, maximizes the signal-to-noise ratio, and efficiently identifies local outliers. In addition to the new optimal extraction we present order splicing and a more robust continuum normalization algorithms.
We have developed and implemented new algorithms that create a continuum-normalized spectrum. In the process we account for the (variable) tilt/curvature of the slit image on the detector and achieve optimal extraction without prior assumptions about the slit illumination. Thus the new method can handle arbitrary image slicers, slit scanning, and other observational techniques aimed at increasing the throughput or dynamic range.
We compare our methods with other techniques for different instruments to illustrate superior performance of the new algorithms compared to commonly used procedures.
△ Less
Submitted 14 October, 2020; v1 submitted 13 August, 2020;
originally announced August 2020.
-
Hidden magnetic fields of young suns
Authors:
O. Kochukhov,
T. Hackman,
J. J. Lehtinen,
A. Wehrhahn
Abstract:
Global magnetic fields of active solar-like stars are nowadays routinely detected with spectropolarimetric measurements and are mapped with Zeeman-Doppler imaging (ZDI). However, due to the cancellation of opposite field polarities, polarimetry captures only a tiny fraction of the magnetic flux and cannot assess the overall stellar surface magnetic field if it is dominated by a small-scale compone…
▽ More
Global magnetic fields of active solar-like stars are nowadays routinely detected with spectropolarimetric measurements and are mapped with Zeeman-Doppler imaging (ZDI). However, due to the cancellation of opposite field polarities, polarimetry captures only a tiny fraction of the magnetic flux and cannot assess the overall stellar surface magnetic field if it is dominated by a small-scale component. Analysis of Zeeman broadening in high-resolution intensity spectra can reveal these hidden complex magnetic fields. Historically, there were very few attempts to obtain such measurements for G dwarf stars due to the difficulty of disentangling Zeeman effect from other broadening mechanisms affecting spectral lines. Here we developed a new magnetic field diagnostic method based on relative Zeeman intensification of optical atomic lines with different magnetic sensitivity. Using this technique we obtained 78 field strength measurements for 15 Sun-like stars, including some of the best-studied young solar twins. We find that the average magnetic field strength $Bf$ drops from 1.3-2.0 kG in stars younger than about 120 Myr to 0.2-0.8 kG in older stars. The mean field strength shows a clear correlation with the Rossby number and with the coronal and chromospheric emission indicators. Our results suggest that magnetic regions have roughly the same local field strength $B\approx3.2$ kG in all stars, with the filling factor $f$ of these regions systematically increasing with stellar activity. Comparing our results with the spectropolarimetric analyses of global magnetic fields in the same stars, we find that ZDI recovers about 1% of the total magnetic field energy in the most active stars. This figure drops to just 0.01% for the least active targets.
△ Less
Submitted 24 February, 2020;
originally announced February 2020.
-
SETI with Gaia: The observational signatures of nearly complete Dyson spheres
Authors:
Erik Zackrisson,
Andreas J. Korn,
Ansgar Wehrhahn,
Johannes Reiter
Abstract:
A star enshrouded in a Dyson sphere with high covering fraction may manifest itself as an optically subluminous object with a spectrophotometric distance estimate significantly in excess of its parallax distance. Using this criterion, the Gaia mission will in coming years allow for Dyson-sphere searches that are complementary to searches based on waste-heat signatures at infrared wavelengths. A li…
▽ More
A star enshrouded in a Dyson sphere with high covering fraction may manifest itself as an optically subluminous object with a spectrophotometric distance estimate significantly in excess of its parallax distance. Using this criterion, the Gaia mission will in coming years allow for Dyson-sphere searches that are complementary to searches based on waste-heat signatures at infrared wavelengths. A limited search of this type is also possible at the current time, by combining Gaia parallax distances with spectrophotometric distances from ground-based surveys. Here, we discuss the merits and shortcomings of this technique and carry out a limited search for Dyson-sphere candidates in the sample of stars common to Gaia Data Release 1 and RAVE Data Release 5. We find that a small fraction of stars indeed display distance discrepancies of the type expected for nearly complete Dyson spheres. To shed light on the properties of objects in this outlier population, we present follow-up high-resolution spectroscopy for one of these stars, the late F-type dwarf TYC 6111-1162-1. The spectrophotometric distance of this object is about twice that derived from its Gaia parallax, and there is no detectable infrared excess. While our analysis largely confirms the stellar parameters and the spectrophotometric distance inferred by RAVE, a plausible explanation for the discrepant distance estimates of this object is that the astrometric solution has been compromised by an unseen binary companion, possibly a rather massive white dwarf ($\approx 1\ M_\odot$). This scenario can be further tested through upcoming Gaia data releases.
△ Less
Submitted 1 July, 2018; v1 submitted 23 April, 2018;
originally announced April 2018.
