Showing 1–13 of 13 results for author: van der Linden, A

Vibrational modes as the origin of dielectric loss at 0.27$\unicode{x2013}$100 THz in a-SiC:H

Authors: B. T. Buijtendorp, A. Endo, W. Jellema, K. Karatsu, K. Kouwenhoven, D. Lamers, A. J. van der Linden, K. Rostem, M. Veen, E. J. Wollack, J. J. A. Baselmans, S. Vollebregt

Abstract: Low-loss deposited dielectrics are beneficial for the advancement of superconducting integrated circuits for astronomy. In the microwave band ($\mathrm{\sim}$1$\unicode{x2013}$10 GHz) the cryogenic and low-power dielectric loss is dominated by two-level systems. However, the origin of the loss in the millimeter-submillimeter band ($\mathrm{\sim}$0.1$\unicode{x2013}$1 THz) is not understood. We mea… ▽ More Low-loss deposited dielectrics are beneficial for the advancement of superconducting integrated circuits for astronomy. In the microwave band ($\mathrm{\sim}$1$\unicode{x2013}$10 GHz) the cryogenic and low-power dielectric loss is dominated by two-level systems. However, the origin of the loss in the millimeter-submillimeter band ($\mathrm{\sim}$0.1$\unicode{x2013}$1 THz) is not understood. We measured the loss of hydrogenated amorphous SiC (a-SiC:H) films in the 0.27$\unicode{x2013}$100 THz range using superconducting microstrip resonators and Fourier-transform spectroscopy. The agreement between the loss data and a Maxwell-Helmholtz-Drude dispersion model suggests that vibrational modes above 10 THz dominate the loss in the a-SiC:H above 200 GHz. △ Less

Submitted 24 May, 2024; v1 submitted 22 May, 2024; originally announced May 2024.

Frequency domain multiplexing readout for large arrays of transition-edge sensors

Authors: Davide Vaccaro, Hiroki Akamatsu, Luciano Gottardi, Jan van der Kuur, Kenichiro Nagayoshi, Emanuele Taralli, Martin de Wit, Marcel P. Bruijn, Anton J. van der Linden, Bert-Joost van Leeuwen, Paul van der Hulst, Kevin Ravensberg, Cor P. de Vries, Mikko Kiviranta, Jian-Rong Gao, Jan-Willem A. den Herder

Abstract: We report our most recent progress and demonstration of a frequency domain multiplexing (FDM) readout technology for transition-edge sensor (TES) arrays, both of which we have been developing, in the framework of the X-IFU instrument on board the future Athena X-ray telescope. Using Ti/Au TES micro-calorimeters, high-Q LC filters and analog/digital electronics developed at SRON and low-noise two-s… ▽ More We report our most recent progress and demonstration of a frequency domain multiplexing (FDM) readout technology for transition-edge sensor (TES) arrays, both of which we have been developing, in the framework of the X-IFU instrument on board the future Athena X-ray telescope. Using Ti/Au TES micro-calorimeters, high-Q LC filters and analog/digital electronics developed at SRON and low-noise two-stage SQUID amplifiers from VTT Finland, we demonstrated feasibility of our FDM readout technology, with the simultaneous readout of 37 pixels with an energy resolution at of 2.23 eV at an energy of 6 keV. We finally outline our plans for further scaling up and improving our technology. △ Less

Submitted 26 August, 2022; originally announced August 2022.

Comments: Version submitted to Nuclear Instruments and Methods A for the proceedings of the Pisa Meeting 2021 conference

Susceptibility study of TES micro-calorimeters for X-ray spectroscopy under FDM readout

Authors: Davide Vaccaro, Hiroki Akamatsu, Luciano Gottardi, Jan van der Kuur, Emanuele Taralli, Martin de Wit, Marcel P. Bruijn, Roland den Hartog, Mikko Kiviranta, Anton J. van der Linden, Kenichiro Nagayoshi, Kevin Ravensberg, Marcel L. Ridder, Sven Visser, Brian D. Jackson, Jian-Rong Gao, Ruud W. M. Hoogeveen, Jan-Willem A. den Herder

Abstract: We present a characterization of the sensitivity of TES X-ray micro-calorimeters to environmental conditions under frequency-domain multiplexing (FDM) readout. In the FDM scheme, each TES in a readout chain is in series with a LC band-pass filter and AC biased with an independent carrier at MHz range. Using TES arrays, cold readout circuitry and warm electronics fabricated at SRON and SQUIDs produ… ▽ More We present a characterization of the sensitivity of TES X-ray micro-calorimeters to environmental conditions under frequency-domain multiplexing (FDM) readout. In the FDM scheme, each TES in a readout chain is in series with a LC band-pass filter and AC biased with an independent carrier at MHz range. Using TES arrays, cold readout circuitry and warm electronics fabricated at SRON and SQUIDs produced at VTT Finland, we characterize the sensitivity of the detectors to bias voltage, bath temperature and magnetic field. We compare our results with the requirements for the Athena X-IFU instrument, showing the compliance of the measured sensitivities. We find in particular that FDM is intrinsically insensitive to the magnetic field because of TES design and AC readout. △ Less

Submitted 23 August, 2022; originally announced August 2022.

Comments: This paper has been accepted for publication in Journal of Low Temperature Physics

Journal ref: Journal of Low Temperature Physics 2022

Thermal crosstalk of X-ray transition-edge sensor micro-calorimeters under frequency domain multiplexing readout

Authors: Davide Vaccaro, Hiroki Akamatsu, Marcel P. Bruijn, Luciano Gottardi, Roland den Hartog, Jan van der Kuur, A. J. van der Linden, Kenichiro Nagayoshi, Kevin Ravensberg, Marcel L. Ridder, Emanuele Taralli, Martin de Wit, Jian-Rong Gao, Ruud W. M. Hoogeveen, Jan-Willem A. den Herder

Abstract: We have measured and characterized the thermal crosstalk in two different arrays of transition-edge sensor (TES) X-ray micro-calorimeters with frequency-domain multiplexing (FDM) readout. The TES arrays are fabricated at SRON and are a 8$\times$8 and a 32$\times$32 "kilo-pixel" uniform array. The amount of crosstalk is evaluated as the ratio between the averaged crosstalk signal and the X-ray puls… ▽ More We have measured and characterized the thermal crosstalk in two different arrays of transition-edge sensor (TES) X-ray micro-calorimeters with frequency-domain multiplexing (FDM) readout. The TES arrays are fabricated at SRON and are a 8$\times$8 and a 32$\times$32 "kilo-pixel" uniform array. The amount of crosstalk is evaluated as the ratio between the averaged crosstalk signal and the X-ray pulse amplitudes. The crosstalk ratios (CR) for our detectors are compliant with the requirements for future X-ray space missions, such as Athena X-IFU (CR$< 10^{-3}$ for first-neighbour pixels): we measured a nearest-neighbour thermal crosstalk ratio at a level of $10^{-4}$, with a highest crosstalk ratio of $4\times 10^{-4}$ for the kilo-pixel array (worst case, center of array) and $1\times 10^{-4}$ for the 8$\times$8 array, with a margin of improvement achievable by optimizing the Cu metallization and the width of the Si supporting structures (muntins) in the backside of the TES array chip. Based on the measured crosstalk ratios, we have estimated the impact on the spectral resolution by means of noise equivalent power (NEP) considerations and a Monte Carlo simulation, finding an average degradation in quadrature of less than 40~meV, compliant with the < 0.2~eV requirement for Athena X-IFU. △ Less

Submitted 24 November, 2021; originally announced November 2021.

Demonstration of MHz frequency domain multiplexing readout of 37 transition edge sensors for high-resolution x-ray imaging spectrometers

Authors: H. Akamatsu, D. Vaccaro, L. Gottardi, J. van der Kuur, C. P. de Vries, M. Kiviranta, K. Ravensberg, M. D'Andrea, E. Taralli, M. de Wit, M. P. Bruijn, P. van der Hulst, R. H. den Hartog, B-J. van Leeuwen, A. J. van der Linden, A. J McCalden, K. Nagayoshi, A. C. T. Nieuwenhuizen, M. L. Ridder, S. Visser, P. van Winden, J. R. Gao, R. W. M. Hoogeveen, B. D. Jackson, J-W. A. den Herder

Abstract: We report on the development and demonstration of a MHz frequency domain multiplexing (FDM) technology to read out arrays of cryogenic transition edge sensor (TES) X-ray microcalorimeters. In our FDM scheme, TESs are AC-biased at different resonant frequencies in the low MHz range through an array of high-$Q$ LC resonators. The current signals of all TESs are summed at superconducting quantum inte… ▽ More We report on the development and demonstration of a MHz frequency domain multiplexing (FDM) technology to read out arrays of cryogenic transition edge sensor (TES) X-ray microcalorimeters. In our FDM scheme, TESs are AC-biased at different resonant frequencies in the low MHz range through an array of high-$Q$ LC resonators. The current signals of all TESs are summed at superconducting quantum interference devices (SQUIDs). We have demonstrated multiplexing for a readout of 31 pixels using room temperature electronics, high-$Q$ LC filters and TES arrays developed at SRON, and SQUID arrays from VTT. We repeated this on a second setup with 37 pixels. The summed X-ray spectral resolutions $@$ 5.9 keV are $ΔでるたE_{\rm 31 pix ~MUX}=2.14\pm0.03$ eV and $ΔでるたE_{\rm 37 pix ~MUX}=2.23\pm0.03$ eV. The demonstrated results are comparable with other multiplexing approaches. There is potential to further improve the spectral resolution and to increase the number of multiplexed TESs, and to open up applications for TES X-ray microcalorimeters. △ Less

Submitted 2 November, 2021; originally announced November 2021.

Comments: 6 pages, 3 figures, accepted for publication on Applied physics letters

Journal ref: Appl. Phys. Lett. 119, 182601 (2021)

Frequency Shift Algorithm: Application to a Frequency-Domain Multiplexing Readout of X-ray Transition-Edge Sensor Microcalorimeters

Authors: D. Vaccaro, H. Akamatsu, J. van der Kuur, P. van der Hulst, A. C. T. Nieuwenhuizen, P. van Winden, L. Gottardi, R. den Hartog, M. P. Bruijn, M. D'Andrea, J. R. Gao, J. W. A. den Herder, R. W. M. Hoogeveen, B. Jackson, A. J. van der Linden, K. Nagayoshi, K. Ravensberg, M. L. Ridder, E. Taralli, M. de Wit

Abstract: In the frequency-domain multiplexing (FDM) scheme, transition-edge sensors (TES) are individually coupled to superconducting LC filters and AC biased at MHz frequencies through a common readout line. To make efficient use of the available readout bandwidth and to minimize the effect of non-linearities, the LC resonators are usually designed to be on a regular grid. The lithographic processes howev… ▽ More In the frequency-domain multiplexing (FDM) scheme, transition-edge sensors (TES) are individually coupled to superconducting LC filters and AC biased at MHz frequencies through a common readout line. To make efficient use of the available readout bandwidth and to minimize the effect of non-linearities, the LC resonators are usually designed to be on a regular grid. The lithographic processes however pose a limit on the accuracy of the effective filter resonance frequencies. Off-resonance bias carriers could be used to suppress the impact of intermodulation distortions, which nonetheless would significantly affect the effective bias circuit and the detector spectral performance. In this paper we present a frequency shift algorithm (FSA) to allow off-resonance readout of TES's while preserving the on-resonance bias circuit and spectral performance, demonstrating its application to the FDM readout of a X-ray TES microcalorimeter array. We discuss the benefits in terms of mitigation of the impact of intermodulation distortions at the cost of increased bias voltage and the scalability of the algorithm to multi-pixel FDM readout. We show that with FSA, in multi-pixel and frequencies shifted on-grid, the line noises due to intermodulation distortion are placed away from the sensitive region in the TES response and the X-ray performance is consistent with the single-pixel, on-resonance level. △ Less

Submitted 11 February, 2021; originally announced February 2021.

Comments: Accepted for publication on Review of Scientific Instruments

A multiplexer for the ac/dc characterization of TES based bolometers and microcalorimeters

Authors: Luciano Gottardi, Hiroki Akamatsu, Marcel Bruijn, Jan R. Gao, Roland den Hartog, Richard Hijmering, Henk Hoevers, Pourya Khosropanah, Jan van der Kuur, Anoton van der Linden, Marcel Lindeman, Marcel Ridder

Abstract: At SRON we are developing the Frequency Domain Multiplexing (FDM) for the read-out of the TES-based detector array for the future infrared and X-ray space mission. We describe the performances of a multiplexer designed to increase the experimental throughput in the characterisation of ultra-low noise equivalent power (NEP) TES bolometers and high energy resolving power X-ray microcalorimeters arra… ▽ More At SRON we are developing the Frequency Domain Multiplexing (FDM) for the read-out of the TES-based detector array for the future infrared and X-ray space mission. We describe the performances of a multiplexer designed to increase the experimental throughput in the characterisation of ultra-low noise equivalent power (NEP) TES bolometers and high energy resolving power X-ray microcalorimeters arrays under ac and dc bias. We discuss the results obtained using the TiAu TES bolometers array fabricated at SRON with measured dark NEP below $5\cdot 10^{-19}W/Hz^{1/2}$ and saturation power of several fW △ Less

Submitted 9 April, 2016; originally announced April 2016.

Comments: 7 pages, 6 figures, Proc. SPIE 8453, High Energy, Optical, and Infrared Detectors for Astronomy V, 845333 (25 September 2012). arXiv admin note: text overlap with arXiv:1604.02593

Journal ref: Proc. SPIE 8453, High Energy, Optical, and Infrared Detectors for Astronomy V, 845333 (25 September 2012)

Weak-Link Phenomena in AC-Biased Transition Edge Sensors

Authors: Luciano Gottardi, Hiroki Akamatsu, Marcel Bruijn, Jan-R. Gao, Roland den Hartog, Richard Hijmering, Henk Hoevers, Pourya Khosropanah, Alex Kozorezov, Jan van der Kuur, Anton van der Linden, Marcel Ridder

Abstract: It has been recently demonstrated that superconducting transition edge sensors (TESs) behave as weak-links due to longitudinally induced superconductivity from the leads with higher Tc. In this work we study the implication of this behaviour for TES-based bolometers and microcalorimeter under ac bias. The TESs are read-out at frequencies between 1 and 5 MHz by a Frequency Domain Multiplexer based… ▽ More It has been recently demonstrated that superconducting transition edge sensors (TESs) behave as weak-links due to longitudinally induced superconductivity from the leads with higher Tc. In this work we study the implication of this behaviour for TES-based bolometers and microcalorimeter under ac bias. The TESs are read-out at frequencies between 1 and 5 MHz by a Frequency Domain Multiplexer based on a linearised two-stage SQUID amplifier and high- Q lithographically made superconducting LC resonators. In particular, we focus on SRON TiAu TES bolometers with a measured dark Noise Equivalent Power (NEP) of $3.2 \cdot 10^{-19} W/Hz^{1/2}$ developed for the short wavelength band for the instrument SAFARI on the SPICA telescope. △ Less

Submitted 3 April, 2016; originally announced April 2016.

Comments: 6 pages, 5 figure

Journal ref: Journal of Low Temperature Physics, 2014, Volume 176, Issue 3, pp 279-284

Development of TES-based detectors array for the X-ray Integral Field Unit (X-IFU) on the future x-ray observatory ATHENA

Authors: Luciano Gottardi, Hiroki Akamatsu, Didier Barret, Marcel P. Bruijn, Roland H. den Hartog, Jan-Willem den Herder, Henk F. C. Hoevers, Mikko Kiviranta, Jan van der Kuur, Anton J. van der Linden, Brian D. Jackson, Madu Jambunathan, Marcel L. Ridder

Abstract: We are developing transition-edge sensor (TES)-based microcalorimeters for the X-ray Integral Field Unit (XIFU) of the future European X-Ray Observatory Athena. The microcalorimeters are based on TiAu TESs coupled to 250μみゅーm squared, AuBi absorbers. We designed and fabricated devices with different contact geometries between the absorber and the TES to optimise the detector performance and with diff… ▽ More We are developing transition-edge sensor (TES)-based microcalorimeters for the X-ray Integral Field Unit (XIFU) of the future European X-Ray Observatory Athena. The microcalorimeters are based on TiAu TESs coupled to 250μみゅーm squared, AuBi absorbers. We designed and fabricated devices with different contact geometries between the absorber and the TES to optimise the detector performance and with different wiring topology to mitigate the self-magnetic field. The design is tailored to optimise the performance under Frequency Domain Multiplexing. In this paper we review the main design feature of the pixels array and we report on the performance of the 18 channels, 2-5MHz frequency domain multiplexer that will be used to characterised the detector array. △ Less

Submitted 2 April, 2016; originally announced April 2016.

Comments: 9 pages, 8 figures

Journal ref: Proc. SPIE 9144, Space Telescopes and Instrumentation 2014: Ultraviolet to Gamma Ray, 91442M (July 25, 2014)

The Flare-energy Distributions Generated by Kink-unstable Ensembles of Zero-net-current Coronal Loops

Authors: M. R. Bareford, P. K. Browning, R. A. M. Van der Linden

Abstract: It has been proposed that the million degree temperature of the corona is due to the combined effect of barely-detectable energy releases, so called nanoflares, that occur throughout the solar atmosphere. Alas, the nanoflare density and brightness implied by this hypothesis means that conclusive verification is beyond present observational abilities. Nevertheless, we investigate the plausibility o… ▽ More It has been proposed that the million degree temperature of the corona is due to the combined effect of barely-detectable energy releases, so called nanoflares, that occur throughout the solar atmosphere. Alas, the nanoflare density and brightness implied by this hypothesis means that conclusive verification is beyond present observational abilities. Nevertheless, we investigate the plausibility of the nanoflare hypothesis by constructing a magnetohydrodynamic (MHD) model that can derive the energy of a nanoflare from the nature of an ideal kink instability. The set of energy-releasing instabilities is captured by an instability threshold for linear kink modes. Each point on the threshold is associated with a unique energy release and so we can predict a distribution of nanoflare energies. When the linear instability threshold is crossed, the instability enters a nonlinear phase as it is driven by current sheet reconnection. As the ensuing flare erupts and declines, the field transitions to a lower energy state, which is modelled by relaxation theory, i.e., helicity is conserved and the ratio of current to field becomes invariant within the loop. We apply the model so that all the loops within an ensemble achieve instability followed by energy-releasing relaxation. The result is a nanoflare energy distribution. Furthermore, we produce different distributions by varying the loop aspect ratio, the nature of the path to instability taken by each loop and also the level of radial expansion that may accompany loop relaxation. The heating rate obtained is just sufficient for coronal heating. In addition, we also show that kink instability cannot be associated with a critical magnetic twist value for every point along the instability threshold. △ Less

Submitted 13 July, 2011; v1 submitted 28 March, 2011; originally announced March 2011.

A Nanoflare Distribution Generated by Repeated Relaxations Triggered by Kink Instability

Authors: Michael R. Bareford, Philippa. K. Browning, Ronald A. M. Van der Linden

Abstract: Context: It is thought likely that vast numbers of nanoflares are responsible for the corona having a temperature of millions of degrees. Current observational technologies lack the resolving power to confirm the nanoflare hypothesis. An alternative approach is to construct a magnetohydrodynamic coronal loop model that has the ability to predict nanoflare energy distributions. Aims: This paper p… ▽ More Context: It is thought likely that vast numbers of nanoflares are responsible for the corona having a temperature of millions of degrees. Current observational technologies lack the resolving power to confirm the nanoflare hypothesis. An alternative approach is to construct a magnetohydrodynamic coronal loop model that has the ability to predict nanoflare energy distributions. Aims: This paper presents the initial results generated by such a model. It predicts heating events with a range of sizes, depending on where the instability threshold for linear kink modes is encountered. The aims are to calculate the distribution of event energies and to investigate whether kink instability can be predicted from a single parameter. Methods: The loop is represented as a straight line-tied cylinder. The twisting caused by random photospheric motions is captured by two parameters, representing the ratio of current density to field strength for specific regions of the loop. Dissipation of the loop's magnetic energy begins during the nonlinear stage of the instability, which develops as a consequence of current sheet reconnection. After flaring, the loop evolves to the state of lowest energy where, in accordance with relaxation theory, the ratio of current to field is constant throughout the loop and helicity is conserved. Results: The results suggest that instability cannot be predicted by any simple twist-derived property reaching a critical value. The model is applied such that the loop undergoes repeated episodes of instability followed by energy-releasing relaxation. Hence, an energy distribution of the nanoflares produced is collated. Conclusions: The final energy distribution features two nanoflare populations that follow different power laws. The power law index for the higher energy population is more than sufficient for coronal heating. △ Less

Submitted 17 September, 2010; v1 submitted 28 May, 2010; originally announced May 2010.

Comments: 13 pages, 18 figures

Report number: AA/2010/14067

Automated LASCO CME catalog for solar cycle 23: are CMEs scale invariant?

Authors: E. Robbrecht, D. Berghmans, R. A. M. Van der Linden

Abstract: In this paper we present the first automatically constructed LASCO CME catalog, a result of the application of the Computer Aided CME Tracking software (CACTus) on the LASCO archive during the interval September 1997 - January 2007. We have studied the CME characteristics and have compared them with similar results obtained by manual detection (CDAW CME catalog). On average CACTus detects less t… ▽ More In this paper we present the first automatically constructed LASCO CME catalog, a result of the application of the Computer Aided CME Tracking software (CACTus) on the LASCO archive during the interval September 1997 - January 2007. We have studied the CME characteristics and have compared them with similar results obtained by manual detection (CDAW CME catalog). On average CACTus detects less than 2 events per day during solar minimum up to 8 events during maximum, nearly half of them being narrow (< 20 degrees). Assuming a correction factor, we find that the CACTus CME rate is surprisingly consistent with CME rates found during the past 30 years. The CACTus statistics show that small scale outflow is ubiquitously observed in the outer corona. The majority of CACTus-only events are narrow transients related to previous CME activity or to intensity variations in the slow solar wind, reflecting its turbulent nature. A significant fraction (about 15%) of CACTus-{\it only} events were identified as independent events, thus not related to other CME activity. The CACTus CME width distribution is essentially scale invariant in angular span over a range of scales from 20 to 120 degrees while previous catalogues present a broad maximum around 30 degrees. The possibility that the size of coronal mass outflows follow a power law distribution could indicate that no typical CME size exists, i.e. that the narrow transients are not different from the larger well-defined CMEs. △ Less

Submitted 7 October, 2008; originally announced October 2008.

Comments: 13 pages. ApJ, accepted

Journal ref: Astrophys.J.691:1222-1234,2009

Unstable coronal loops : numerical simulations with predicted observational signatures

Authors: T. D. Arber, A. W. Longbottom, R. A. M. Van der Linden

Abstract: We present numerical studies of the nonlinear, resistive magnetohydrodynamic (MHD) evolution of coronal loops. For these simulations we assume that the loops carry no net current, as might be expected if the loop had evolved due to vortex flows. Furthermore the initial equilibrium is taken to be a cylindrical flux tube with line-tied ends. For a given amount of twist in the magnetic field it is… ▽ More We present numerical studies of the nonlinear, resistive magnetohydrodynamic (MHD) evolution of coronal loops. For these simulations we assume that the loops carry no net current, as might be expected if the loop had evolved due to vortex flows. Furthermore the initial equilibrium is taken to be a cylindrical flux tube with line-tied ends. For a given amount of twist in the magnetic field it is well known that once such a loop exceeds a critical length it becomes unstableto ideal MHD instabilities. The early evolution of these instabilities generates large current concentrations. Firstly we show that these current concentrations are consistent with the formation of a current sheet. Magnetic reconnection can only occur in the vicinity of these current concentrations and we therefore couple the resistivity to the local current density. This has the advantage of avoiding resistive diffusion in regions where it should be negligible. We demonstrate the importance of this procedure by comparison with simulations based on a uniform resistivity. From our numerical experiments we are able to estimate some observational signatures for unstable coronal loops. These signatures include: the timescale of the loop brightening; the temperature increase; the energy released and the predicted observable flow speeds. Finally we discuss to what extent these observational signatures are consistent with the properties of transient brightening loops. △ Less

Submitted 17 March, 1999; originally announced March 1999.

Comments: 13 pages, 9 figures