-
Observation of Antiferroelectric Domain Walls in a Uniaxial Hyperferroelectric
Authors:
Michele Conroy,
Didrik René Småbråten,
Colin Ophus,
Konstantin Shapovalov,
Quentin M. Ramasse,
Kasper Aas Hunnestad,
Sverre M. Selbach,
Ulrich Aschauer,
Kalani Moore,
J. Marty Gregg,
Ursel Bangert,
Massimiliano Stengel,
Alexei Gruverman,
Dennis Meier
Abstract:
Ferroelectric domain walls are a rich source of emergent electronic properties and unusual polar order. Recent studies showed that the configuration of ferroelectric walls can go well beyond the conventional Ising-type structure. Néel-, Bloch-, and vortex-like polar patterns have been observed, displaying strong similarities with the spin textures at magnetic domain walls. Here, we report the disc…
▽ More
Ferroelectric domain walls are a rich source of emergent electronic properties and unusual polar order. Recent studies showed that the configuration of ferroelectric walls can go well beyond the conventional Ising-type structure. Néel-, Bloch-, and vortex-like polar patterns have been observed, displaying strong similarities with the spin textures at magnetic domain walls. Here, we report the discovery of antiferroelectric domain walls in the uniaxial ferroelectric Pb$_{5}$Ge$_{3}$O$_{11}$. We resolve highly mobile domain walls with an alternating displacement of Pb atoms, resulting in a cyclic 180$^{\circ}$ flip of dipole direction within the wall. Density functional theory calculations reveal that Pb$_{5}$Ge$_{3}$O$_{11}$ is hyperferroelectric, allowing the system to overcome the depolarization fields that usually suppress antiparallel ordering of dipoles along the longitudinal direction. Interestingly, the antiferroelectric walls observed under the electron beam are energetically more costly than basic head-to-head or tail-to-tail walls. The results suggest a new type of excited domain-wall state, expanding previous studies on ferroelectric domain walls into the realm of antiferroic phenomena.
△ Less
Submitted 5 September, 2023;
originally announced September 2023.
-
Ultra-High Carrier Mobilities in Ferroelectric Domain Wall Corbino Cones at Room Temperature
Authors:
Conor J. McCluskey,
Matthew G. Colbear,
James P. V. McConville,
Shane J. McCartan,
Jesi R. Maguire,
Michele Conroy,
Kalani Moore,
Alan Harvey,
Felix Trier,
Ursel Bangert,
Alexei Gruverman,
Manuel Bibes,
Amit Kumar,
Raymond G. P. McQuaid,
J. Marty Gregg
Abstract:
Recently, electrically conducting heterointerfaces between dissimilar band-insulators (such as lanthanum aluminate and strontium titanate) have attracted considerable research interest. Charge transport has been thoroughly explored and fundamental aspects of conduction firmly established. Perhaps surprisingly, similar insights into conceptually much simpler conducting homointerfaces, such as the d…
▽ More
Recently, electrically conducting heterointerfaces between dissimilar band-insulators (such as lanthanum aluminate and strontium titanate) have attracted considerable research interest. Charge transport has been thoroughly explored and fundamental aspects of conduction firmly established. Perhaps surprisingly, similar insights into conceptually much simpler conducting homointerfaces, such as the domain walls that separate regions of different orientations of electrical polarisation within the same ferroelectric band-insulator, are not nearly so well-developed. Addressing this disparity, we herein report magnetoresistance in approximately conical 180o charged domain walls, which occur in partially switched ferroelectric thin film single crystal lithium niobate. This system is ideal for such measurements: firstly, the conductivity difference between domains and domain walls is extremely and unusually large (a factor of at least 1013) and hence currents driven through the thin film, between planar top and bottom electrodes, are overwhelmingly channelled along the walls; secondly, when electrical contact is made to the top and bottom of the domain walls and a magnetic field is applied along their cone axes (perpendicular to the thin film surface), then the test geometry mirrors that of a Corbino disc, which is a textbook arrangement for geometric magnetoresistance measurement. Our data imply carriers at the domain walls with extremely high room temperature Hall mobilities of up to ~ 3,700cm2V-1s-1. This is an unparalleled value for oxide interfaces (and for bulk oxides too) and is most comparable to mobilities in other systems typically seen at cryogenic, rather than at room, temperature.
△ Less
Submitted 29 June, 2022;
originally announced June 2022.
-
TopoTEM: A Python Package for Quantifying and Visualising Scanning Transmission Electron Microscopy Data of Polar Topologies
Authors:
Eoghan OConnell,
Kalani Moore,
Elora McFall,
Michael Hennessy,
Eoin Moynihan,
Ursel Bangert,
Michele Conroy
Abstract:
The exotic internal structure of polar topologies in multi-ferroic materials offers a rich landscape for materials science research. As the spatial scale of these entities are often sub-atomic in nature, aberration corrected transmission electron microscopy (TEM) is the ideal characterisation technique. Software to quantify and visualise the slight shifts in atomic placement within unit cells is o…
▽ More
The exotic internal structure of polar topologies in multi-ferroic materials offers a rich landscape for materials science research. As the spatial scale of these entities are often sub-atomic in nature, aberration corrected transmission electron microscopy (TEM) is the ideal characterisation technique. Software to quantify and visualise the slight shifts in atomic placement within unit cells is of paramount importance due to the now routine acquisition of images at such resolution. In the previous ~decade since the commercialisation of aberration corrected TEM, many research groups have written their own code to visualise these polar entities. More recently, open access Python packages have been developed for the purpose of TEM atomic position quantification. Building on these packages, we introduce the TEMUL Toolkit: a Python package for analysis and visualisation of atomic resolution images. Here, we focus specifically on the TopoTEM module of the toolkit where we show an easy to follow, streamlined version of calculating the atomic displacements relative to the surrounding lattice and thus polarisation plotting. We hope this toolkit will benefit the rapidly expanding field of topology based nano-electronic and quantum materials research, and we invite the electron microscopy community to contribute to this open access project.
△ Less
Submitted 30 September, 2021;
originally announced October 2021.
-
Plasmons in MoS2 Studied via Experimental and Theoretical Correlation of Energy Loss Spectra
Authors:
Eoin Moynihan,
Stefan Rost,
Eoghan O'Connell,
Quentin Ramasse,
Christoph Friedrich,
Ursel Bangert
Abstract:
Two dimensional materials offer a path forward for smaller and more efficient devices. Their optical and electronic properties give way to beat the limits set in place by Moore's Law. Plasmon are the collective oscillations of electrons and can confine light to dimensions much smaller than its wavelength. In this work we explore the plasmonic properties of MoS2, a representational candidate from a…
▽ More
Two dimensional materials offer a path forward for smaller and more efficient devices. Their optical and electronic properties give way to beat the limits set in place by Moore's Law. Plasmon are the collective oscillations of electrons and can confine light to dimensions much smaller than its wavelength. In this work we explore the plasmonic properties of MoS2, a representational candidate from a family of 2D materials known as transition metal dichalcogenides. High resolution electron microscopy and spectroscopy provide insights in the plasmonic properties of MoS2 down to an atomic scale. Experimental results show the relationship between plasmons and interband transitions in the electron energy loss spectrum. Density functional theory provides a theoretical support for the experimental findings and provides commentary on the fundamental underlying physics.
△ Less
Submitted 17 December, 2020;
originally announced December 2020.
-
Atomically Resolved Imaging of Highly Ordered Alternating Fluorinated Graphene
Authors:
Reza J. Kashtiban,
M. Adam Dyson,
Rahul R. Nair,
Recep Zan,
Swee L. Wong,
Quentin Ramasse,
Andre K. Geim,
Ursel Bangert,
Jeremy Sloan
Abstract:
One of the most desirable goals of graphene research is to produce ordered 2D chemical derivatives of suitable quality for monolayer device fabrication. Here we reveal, by focal series exit wave reconstruction, that C2F chair is a stable graphene derivative and demonstrates pristine long-range order limited only by the size of a functionalized domain. Focal series of images of graphene and C2F cha…
▽ More
One of the most desirable goals of graphene research is to produce ordered 2D chemical derivatives of suitable quality for monolayer device fabrication. Here we reveal, by focal series exit wave reconstruction, that C2F chair is a stable graphene derivative and demonstrates pristine long-range order limited only by the size of a functionalized domain. Focal series of images of graphene and C2F chair formed by reaction with XeF2 were obtained at 80 kV in an aberration-corrected transmission electron microscope. EWR images reveal that single carbon atoms and carbon-fluorine pairs in C2F chair alternate strictly over domain sizes of at least 150 nm^2 with electron diffraction indicating ordered domains >/= 0.16 square micrometer. Our results also indicate that, within an ordered domain, functionalization occurs on one side only as theory predicts. Additionally we show that electron diffraction provides a quick and easy method for distinguishing between graphene, C2F chair and fully fluorinated stoichiometric CF 2D phases.
△ Less
Submitted 14 October, 2014;
originally announced October 2014.
-
Silicon-carbon bond inversions driven by 60 keV electrons in graphene
Authors:
Toma Susi,
Jani Kotakoski,
Demie Kepaptsoglou,
Clemens Mangler,
Tracy C. Lovejoy,
Ondrej L. Krivanek,
Recep Zan,
Ursel Bangert,
Paola Ayala,
Jannik C. Meyer,
Quentin Ramasse
Abstract:
We demonstrate that 60 keV electron irradiation drives the diffusion of threefold coordinated Si dopants in graphene by one lattice site at a time. First principles simulations reveal that each step is caused by an electron impact on a C atom next to the dopant. Although the atomic motion happens below our experimental time resolution, stochastic analysis of 38 such lattice jumps reveals a probabi…
▽ More
We demonstrate that 60 keV electron irradiation drives the diffusion of threefold coordinated Si dopants in graphene by one lattice site at a time. First principles simulations reveal that each step is caused by an electron impact on a C atom next to the dopant. Although the atomic motion happens below our experimental time resolution, stochastic analysis of 38 such lattice jumps reveals a probability for their occurrence in a good agreement with the simulations. Conversions from three- to fourfold coordinated dopant structures and the subsequent reverse process are significantly less likely than the direct bond inversion. Our results thus provide a model of non-destructive and atomically precise structural modification and detection for two-dimensional materials.
△ Less
Submitted 17 July, 2014; v1 submitted 16 July, 2014;
originally announced July 2014.
-
Control of Radiation Damage in MoS2 by Graphene Encapsulation
Authors:
Recep Zan,
Quentin M Ramasse,
Rashid Jalil,
Thanasis Georgiou,
Ursel Bangert,
Kostya S. Novoselov
Abstract:
Recent dramatic progress in studying various two-dimensional (2D) atomic crystals and their heterostructures calls for better and more detailed understanding of their crystallography, reconstruction, stacking order, etc. For this, direct imaging and identification of each and every atom is essential. Transmission Electron Microscopy (TEM) and Scanning Transmission Electron Microscopy (STEM) are id…
▽ More
Recent dramatic progress in studying various two-dimensional (2D) atomic crystals and their heterostructures calls for better and more detailed understanding of their crystallography, reconstruction, stacking order, etc. For this, direct imaging and identification of each and every atom is essential. Transmission Electron Microscopy (TEM) and Scanning Transmission Electron Microscopy (STEM) are ideal, and perhaps the only tools for such studies. However, the electron beam can in some cases induce dramatic structure changes and radiation damage becomes an obstacle in obtaining the desired information in imaging and chemical analysis in the (S)TEM. This is the case of 2D materials such as molybdenum disulfide MoS2, but also of many biological specimens, molecules and proteins. Thus, minimizing damage to the specimen is essential for optimum microscopic analysis. In this letter we demonstrate, on the example of MoS2, that encapsulation of such crystals between two layers of graphene allows for a dramatic improvement in stability of the studied 2D crystal, and permits careful control over the defect nature and formation in it. We present STEM data collected from single layer MoS2 samples prepared for observation in the microscope through three distinct procedures. The fabricated single layer MoS2 samples were either left bare (pristine), placed atop a single-layer of graphene or finally encapsulated between single graphene layers. Their behaviour under the electron beam is carefully compared and we show that the MoS2 sample 'sandwiched' between the graphene layers has the highest durability and lowest defect formation rate compared to the other two samples, for very similar experimental conditions.
△ Less
Submitted 15 October, 2013;
originally announced October 2013.
-
Graphene re-knits its holes
Authors:
Recep Zan,
Quentin M. Ramasse,
Ursel Bangert,
Konstantin S. Novoselov
Abstract:
Nano-holes, etched under an electron beam at room temperature in singlelayer graphene sheets as a result of their interaction with metalimpurities, are shown to heal spontaneously by filling up with either non-hexagon, graphene-like, or perfect hexagon 2D structures. Scanning transmission electron microscopy was employed to capture the healing process and study atom-by-atom the re-grown structure.…
▽ More
Nano-holes, etched under an electron beam at room temperature in singlelayer graphene sheets as a result of their interaction with metalimpurities, are shown to heal spontaneously by filling up with either non-hexagon, graphene-like, or perfect hexagon 2D structures. Scanning transmission electron microscopy was employed to capture the healing process and study atom-by-atom the re-grown structure. A combination of these nano-scale etching and re-knitting processes could lead to new graphene tailoring approaches.
△ Less
Submitted 5 July, 2012;
originally announced July 2012.
-
Direct Experimental Evidence of Metal-Mediated Etching of Suspended Graphene
Authors:
Quentin M. Ramasse,
Recep Zan,
Ursel Bangert,
Danil W. Boukhvalov,
Young-Woo Son,
Konstantin S. Novoselov
Abstract:
Atomic resolution high angle annular dark field imaging of suspended, single-layer graphene, onto which the metals Cr, Ti, Pd, Ni, Al and Au atoms had been deposited was carried out in an aberration corrected scanning transmission electron microscope. In combination with electron energy loss spectroscopy, employed to identify individual impurity atoms, it was shown that nano-scale holes were etche…
▽ More
Atomic resolution high angle annular dark field imaging of suspended, single-layer graphene, onto which the metals Cr, Ti, Pd, Ni, Al and Au atoms had been deposited was carried out in an aberration corrected scanning transmission electron microscope. In combination with electron energy loss spectroscopy, employed to identify individual impurity atoms, it was shown that nano-scale holes were etched into graphene, initiated at sites where single atoms of all the metal species except for gold come into close contact with the graphene. The e-beam scanning process is instrumental in promoting metal atoms from clusters formed during the original metal deposition process onto the clean graphene surface, where they initiate the hole-forming process. Our observations are discussed in the light of calculations in the literature, predicting a much lowered vacancy formation in graphene when metal ad-atoms are present. The requirement and importance of oxygen atoms in this process, although not predicted by such previous calculations, is also discussed, following our observations of hole formation in pristine graphene in the presence of Si-impurity atoms, supported by new calculations which predict a dramatic decrease of the vacancy formation energy, when SiOx molecules are present.
△ Less
Submitted 3 May, 2012;
originally announced May 2012.
-
Graphene as a transparent conductive support for studying biological molecules by transmission electron microscopy
Authors:
R. R. Nair,
P. Blake,
J. R. Blake,
R. Zan,
S. Anissimova,
U. Bangert,
A. P. Golovanov,
S. V. Morozov,
T. Latychevskaia,
A. K. Geim,
K. S. Novoselov
Abstract:
We demonstrate the application of graphene as a support for imaging individual biological molecules in transmission electron microscope (TEM). A simple procedure to produce free-standing graphene membranes has been designed. Such membranes are extremely robust and can support practically any sub-micrometer object. Tobacco mosaic virus has been deposited on graphene samples and observed in a TEM. H…
▽ More
We demonstrate the application of graphene as a support for imaging individual biological molecules in transmission electron microscope (TEM). A simple procedure to produce free-standing graphene membranes has been designed. Such membranes are extremely robust and can support practically any sub-micrometer object. Tobacco mosaic virus has been deposited on graphene samples and observed in a TEM. High contrast has been achieved even though no staining has been applied.
△ Less
Submitted 23 October, 2010;
originally announced October 2010.
-
Macroscopic graphene membranes and their extraordinary stiffness
Authors:
T. J. Booth,
P. Blake,
R. R. Nair,
D. Jiang,
E. W. Hill,
U. Bangert,
A. Bleloch,
M. Gass,
K. S. Novoselov,
M. I. Katsnelson,
A. K. Geim
Abstract:
The properties of suspended graphene are currently attracting enormous interest, but the small size of available samples and the difficulties in making them severely restrict the number of experimental techniques that can be used to study the optical, mechanical, electronic, thermal and other characteristics of this one-atom-thick material. Here we describe a new and highly-reliable approach for…
▽ More
The properties of suspended graphene are currently attracting enormous interest, but the small size of available samples and the difficulties in making them severely restrict the number of experimental techniques that can be used to study the optical, mechanical, electronic, thermal and other characteristics of this one-atom-thick material. Here we describe a new and highly-reliable approach for making graphene membranes of a macroscopic size (currently up to 100 microns in diameter) and their characterization by transmission electron microscopy. In particular, we have found that long graphene beams supported by one side only do not scroll or fold, in striking contrast to the current perception of graphene as a supple thin fabric, but demonstrate sufficient stiffness to support extremely large loads, millions of times exceeding their own weight, in agreement with the presented theory. Our work opens many avenues for studying suspended graphene and using it in various micromechanical systems and electron microscopy.
△ Less
Submitted 18 June, 2008; v1 submitted 13 May, 2008;
originally announced May 2008.
