-
On the rotational alignment of graphene domains grown on Ge(110) and Ge(111)
Authors:
P. C. Rogge,
M. E. Foster,
J. M. Wofford,
K. F. McCarty,
N. C. Bartelt,
O. D. Dubon
Abstract:
We have used low-energy electron diffraction and microscopy to compare the growth of graphene on hydrogen-free Ge(111) and Ge(110) from an atomic carbon flux. Growth on Ge(110) leads to significantly better rotational alignment of graphene domains with the substrate. To explain the poor rotational alignment on Ge(111), we have investigated experimentally and theoretically how the adatom reconstruc…
▽ More
We have used low-energy electron diffraction and microscopy to compare the growth of graphene on hydrogen-free Ge(111) and Ge(110) from an atomic carbon flux. Growth on Ge(110) leads to significantly better rotational alignment of graphene domains with the substrate. To explain the poor rotational alignment on Ge(111), we have investigated experimentally and theoretically how the adatom reconstructions on Ge interact with graphene. We find that the ordering transition of the adatom reconstruction of Ge(111) is not significantly perturbed by graphene. Density functional theory calculations show that graphene on reconstructed Ge(110) has large-amplitude corrugations, whereas it is remarkably flat on reconstructed Ge(111). We argue that the absence of corrugations prevents graphene islands from locking into a preferred orientation.
△ Less
Submitted 30 June, 2015;
originally announced July 2015.
-
Real-time observation of epitaxial graphene domain reorientation
Authors:
Paul C. Rogge,
Konrad Thürmer,
Michael E. Foster,
Kevin F. McCarty,
Oscar D. Dubon,
Norman C. Bartelt
Abstract:
Graphene films grown by vapor deposition tend to be polycrystalline due to the nucleation and growth of islands with different in-plane orientations. Here, using low-energy electron microscopy, we find that micron-sized graphene islands on Ir(111) rotate to a preferred orientation during thermal annealing. We observe three alignment mechanisms: the simultaneous growth of aligned domains and dissol…
▽ More
Graphene films grown by vapor deposition tend to be polycrystalline due to the nucleation and growth of islands with different in-plane orientations. Here, using low-energy electron microscopy, we find that micron-sized graphene islands on Ir(111) rotate to a preferred orientation during thermal annealing. We observe three alignment mechanisms: the simultaneous growth of aligned domains and dissolution of rotated domains, i.e., "ripening"; domain-boundary motion within islands; and continuous lattice-rotation of entire domains. By measuring the relative growth velocity of domains during ripening, we estimate that the driving force for alignment is on the order of 0.1 meV per C atom and increases with rotation angle. A simple model of the orientation-dependent energy associated with the moiré corrugation of the graphene sheet due to local variations in the graphene-substrate interaction reproduces the results. This work suggests new strategies for improving the van der Waals epitaxy of 2D materials.
△ Less
Submitted 26 February, 2015;
originally announced February 2015.
-
Metal-insulator transition of the reduced surface of yttria-stabilized zirconia near Pt electrodes
Authors:
D. A. Siegel,
F. El Gabaly,
K. F. McCarty,
N. C. Bartelt
Abstract:
The electrochemical reactions of solid oxide fuel cells occur in the region where gas-phase species, electrode, and electrolyte coincide. When the electrode is an ionic insulator and the electrolyte is an electronic insulator, this `triple phase boundary' is assumed to have atomic dimensions. Here we use photoemission electron microscopy to show that the reduced surface of the electrolyte yttria-s…
▽ More
The electrochemical reactions of solid oxide fuel cells occur in the region where gas-phase species, electrode, and electrolyte coincide. When the electrode is an ionic insulator and the electrolyte is an electronic insulator, this `triple phase boundary' is assumed to have atomic dimensions. Here we use photoemission electron microscopy to show that the reduced surface of the electrolyte yttria-stabilized zirconia (YSZ) undergoes a metal-insulator transition near Pt negative electrodes. YSZ's electron conducting region functions as an extended triple phase boundary that can be many microns in size, depending on oxygen pressure, temperature, applied voltage, and time.
△ Less
Submitted 3 July, 2014; v1 submitted 22 June, 2014;
originally announced June 2014.
-
Order-disorder phase transition on the (100) surface of magnetite
Authors:
Norman C. Bartelt,
Shu Nie,
Elena Starodub,
Ivan Bernal,
Silvia Gallego,
Lucia Vergara,
Kevin F. McCarty,
Juan de la Figuera
Abstract:
Using low-energy electron diffraction, we show that the room-temperature $(\sqrt{2}\times\sqrt{2})R45^\circ$ reconstruction of Fe$_3$O$_4$(100) reversibly disorders at $\sim$450 $^\circ$C. Short-range order persists above the transition, suggesting that the transition is second order and Ising-like. We interpret the transition in terms of a model in which sub-surface Fe$^{3+}$ is replaced by Fe…
▽ More
Using low-energy electron diffraction, we show that the room-temperature $(\sqrt{2}\times\sqrt{2})R45^\circ$ reconstruction of Fe$_3$O$_4$(100) reversibly disorders at $\sim$450 $^\circ$C. Short-range order persists above the transition, suggesting that the transition is second order and Ising-like. We interpret the transition in terms of a model in which sub-surface Fe$^{3+}$ is replaced by Fe$^{2+}$ as the temperature is raised. This model reproduces the structure of antiphase boundaries previously observed with STM as well as the continuous nature of the transition. To account for the observed transition temperature, the energy cost of each charge rearrangement is 82 meV.
△ Less
Submitted 22 October, 2013;
originally announced October 2013.
-
Energetics and diffusion of gold in bismuth telluride
Authors:
Michael C. Shaughnessy,
Josh D. Sugar,
Norm C. Bartelt,
Jonathan A. Zimmerman
Abstract:
We have coupled electron microscopy and energy dispersive spectroscopy experiments with \textit{ab-initio} modeling to study the solubility and diffusion of Au in Bi$_2$Te$_3$. We found that thermal annealing of Au films results in Au concentrations in Bi$_2$Te$_3$ above the previously reported solubility limit. The time scale of Au diffusion into Bi$_2$Te$_3$ is also much greater than expected. T…
▽ More
We have coupled electron microscopy and energy dispersive spectroscopy experiments with \textit{ab-initio} modeling to study the solubility and diffusion of Au in Bi$_2$Te$_3$. We found that thermal annealing of Au films results in Au concentrations in Bi$_2$Te$_3$ above the previously reported solubility limit. The time scale of Au diffusion into Bi$_2$Te$_3$ is also much greater than expected. To explain our observations, we calculate defect formation energies and diffusion barriers within DFT. We identify an interstitial mechanism consistent with the previously observed low solubility and (rapid) anisotropic diffusion. However, the lower formation energies of substitutional defects suggest that they may be active in our experiments and explain the high observed concentrations.
△ Less
Submitted 20 July, 2013; v1 submitted 2 May, 2013;
originally announced May 2013.
-
Viable thermionic emission from graphene-covered metals
Authors:
Elena Starodub,
Norman C. Bartelt,
Kevin F. McCarty
Abstract:
Thermionic emission from monolayer graphene grown on representative transition metals, Ir and Ru, is characterized by low-energy electron microscopy (LEEM). Work functions were determined from the temperature dependence of the emission current and from the electron energy spectrum of emitted electrons. The high-temperature work function of the strongly interacting system graphene/Ru(0001) is suffi…
▽ More
Thermionic emission from monolayer graphene grown on representative transition metals, Ir and Ru, is characterized by low-energy electron microscopy (LEEM). Work functions were determined from the temperature dependence of the emission current and from the electron energy spectrum of emitted electrons. The high-temperature work function of the strongly interacting system graphene/Ru(0001) is sufficiently low, 3.3 \pm 0.1 eV, to have technological potential for large-area emitters that are spatially uniform, efficient, and chemically inert. The thermionic work functions of the less strongly interacting system graphene/Ir(111) are over 1 eV larger and vary substantially (0.4 eV) between graphene orientations rotated by 30°.
△ Less
Submitted 23 April, 2012;
originally announced April 2012.
-
Graphene/Au(111) interaction studied by scanning tunneling microscopy
Authors:
Shu Nie,
Norman C. Bartelt,
Joseph M. Wofford,
Oscar D. Dubon,
Kevin F. McCarty,
Konrad Thürmer
Abstract:
We have used scanning tunneling microscopy to study the structure of graphene islands on Au(111) grown by deposition of elemental carbon at 950°C. Consistent with low-energy electron microscopic observations, we find that the graphene islands have dendritic shapes. The islands tend to cover depressed regions of the Au surface, suggesting that Au is displaced as the graphene grows. If small tunneli…
▽ More
We have used scanning tunneling microscopy to study the structure of graphene islands on Au(111) grown by deposition of elemental carbon at 950°C. Consistent with low-energy electron microscopic observations, we find that the graphene islands have dendritic shapes. The islands tend to cover depressed regions of the Au surface, suggesting that Au is displaced as the graphene grows. If small tunneling currents are used, it is possible to image simultaneously the graphene/Au moiré and the Au herringbone reconstruction, which forms underneath the graphene on cooling from the growth temperature. The delicate herringbone structure and its periodicity remain unchanged from the bare Au surface. Using a Frenkel-Kontorova model we deduce that this striking observation is consistent with an attraction between graphene and Au of less than 13 meV per C atom. Raman spectroscopy supports this weak interaction. However, at the tunneling currents necessary for atomic resolution image of graphene, the Au reconstruction is altered, implying influential tip-sample interactions and a mobile Au surface beneath the graphene.
△ Less
Submitted 11 April, 2012;
originally announced April 2012.
-
Extraordinary epitaxial alignment of graphene islands on Au(111)
Authors:
Joseph M. Wofford,
Elena Starodub,
Andrew L. Walter,
Shu Nie,
Aaron Bostwick,
Norman C. Bartelt,
Konrad Thürmer,
Eli Rotenberg,
Kevin F. McCarty,
Oscar D. Dubon
Abstract:
Pristine, single-crystalline graphene displays a unique collection of remarkable electronic properties that arise from its two-dimensional, honeycomb structure. Using in-situ low-energy electron microscopy, we show that when deposited on the (111) surface of Au carbon forms such a structure. The resulting monolayer, epitaxial film is formed by the coalescence of dendritic graphene islands that nuc…
▽ More
Pristine, single-crystalline graphene displays a unique collection of remarkable electronic properties that arise from its two-dimensional, honeycomb structure. Using in-situ low-energy electron microscopy, we show that when deposited on the (111) surface of Au carbon forms such a structure. The resulting monolayer, epitaxial film is formed by the coalescence of dendritic graphene islands that nucleate at a high density. Over 95% of these islands can be identically aligned with respect to each other and to the Au substrate. Remarkably, the dominant island orientation is not the better lattice-matched 30^{\circ} rotated orientation but instead one in which the graphene [01] and Au [011] in-plane directions are parallel. The epitaxial graphene film is only weakly coupled to the Au surface, which maintains its reconstruction under the slightly p-type doped graphene. The linear electronic dispersion characteristic of free-standing graphene is retained regardless of orientation. That a weakly interacting, non-lattice matched substrate is able to lock graphene into a particular orientation is surprising. This ability, however, makes Au(111) a promising substrate for the growth of single crystalline graphene films.
△ Less
Submitted 4 May, 2012; v1 submitted 2 February, 2012;
originally announced February 2012.
-
Origin of the Mosaicity in Graphene Grown on Cu(111)
Authors:
S. Nie,
J. M. Wofford,
N. C. Bartelt,
O. D. Dubon,
K. F. McCarty
Abstract:
We use low-energy electron microscopy to investigate how graphene grows on Cu(111). Graphene islands first nucleate at substrate defects such as step bunches and impurities. A considerable fraction of these islands can be rotationally misaligned with the substrate, generating grain boundaries upon interisland impingement. New rotational boundaries are also generated as graphene grows across substr…
▽ More
We use low-energy electron microscopy to investigate how graphene grows on Cu(111). Graphene islands first nucleate at substrate defects such as step bunches and impurities. A considerable fraction of these islands can be rotationally misaligned with the substrate, generating grain boundaries upon interisland impingement. New rotational boundaries are also generated as graphene grows across substrate step bunches. Thus, rougher substrates lead to higher degrees of mosaicity than do flatter substrates. Increasing the growth temperature improves crystallographic alignment. We demonstrate that graphene growth on Cu(111) is surface diffusion limited by comparing simulations of the time evolution of island shapes with experiments. Islands are dendritic with distinct lobes, but unlike the polycrystalline, four-lobed islands observed on (100)-textured Cu foils, each island can be a single crystal. Thus, epitaxial graphene on smooth, clean Cu(111) has fewer structural defects than it does on Cu(100).
△ Less
Submitted 18 October, 2011; v1 submitted 10 July, 2011;
originally announced July 2011.
-
Graphene Growth by Metal Etching on Ru(0001)
Authors:
E. Loginova,
S. Maier,
I. Stass,
N. C. Bartelt,
P. J. Feibelman,
M. Salmeron,
K. F. McCarty
Abstract:
Low-energy electron microscopy (LEEM) reveals a new mode of graphene growth on Ru(0001) in which Ru atoms are etched from a step edge and injected under a growing graphene sheet. Based on density functional calculations, we propose a model wherein injected Ru atoms form metastable islands under the graphene. Scanning tunneling microscopy (STM) reveals that dislocation networks exist near step ed…
▽ More
Low-energy electron microscopy (LEEM) reveals a new mode of graphene growth on Ru(0001) in which Ru atoms are etched from a step edge and injected under a growing graphene sheet. Based on density functional calculations, we propose a model wherein injected Ru atoms form metastable islands under the graphene. Scanning tunneling microscopy (STM) reveals that dislocation networks exist near step edges, consistent with some of the injected atoms being incorporated into the topmost Ru layer, thereby increasing its density.
△ Less
Submitted 26 January, 2010;
originally announced January 2010.
-
Oxidation of graphene on metals
Authors:
Elena Starodub,
Norman C. Bartelt,
Kevin F. McCarty
Abstract:
We use low-energy electron microscopy to investigate how graphene is removed from Ru(0001) and Ir(111) by reaction with oxygen. We find two mechanisms on Ru(0001). At short times, oxygen reacts with carbon monomers on the surrounding Ru surface, decreasing their concentration below the equilibrium value. This undersaturation causes a flux of carbon from graphene to the monomer gas. In this initi…
▽ More
We use low-energy electron microscopy to investigate how graphene is removed from Ru(0001) and Ir(111) by reaction with oxygen. We find two mechanisms on Ru(0001). At short times, oxygen reacts with carbon monomers on the surrounding Ru surface, decreasing their concentration below the equilibrium value. This undersaturation causes a flux of carbon from graphene to the monomer gas. In this initial mechanism, graphene is etched at a rate that is given precisely by the same non-linear dependence on carbon monomer concentration that governs growth. Thus, during both growth and etching, carbon attaches and detaches to graphene as clusters of several carbon atoms. At later times, etching accelerates. We present evidence that this process involves intercalated oxygen, which destabilizes graphene. On Ir, this mechanism creates observable holes. It also occurs mostly quickly near wrinkles in the graphene islands, depends on the orientation of the graphene with respect to the Ir substrate, and, in contrast to the first mechanism, can increase the density of carbon monomers. We also observe that both layers of bilayer graphene islands on Ir etch together, not sequentially.
△ Less
Submitted 11 February, 2010; v1 submitted 26 January, 2010;
originally announced January 2010.
-
Defects of graphene on Ir(111): rotational domains and ridges
Authors:
Elena Loginova,
Shu Nie,
Konrad Thurmer,
Norman C. Bartelt,
Kevin F. McCarty
Abstract:
We use low-energy electron microscopy (LEEM), low-energy electron diffraction (LEED) and scanning tunneling microscopy (STM) to study different orientations of single-layer graphene sheets on Ir(111). The most-abundant orientation has previously been characterized in the literature. Using selective-area LEED we find three other variants, which are rotated 14, 18.5 and 30 degrees with respect to…
▽ More
We use low-energy electron microscopy (LEEM), low-energy electron diffraction (LEED) and scanning tunneling microscopy (STM) to study different orientations of single-layer graphene sheets on Ir(111). The most-abundant orientation has previously been characterized in the literature. Using selective-area LEED we find three other variants, which are rotated 14, 18.5 and 30 degrees with respect to the most common variant. The about 30-degree-rotated structure is also studied by STM. We propose that all 4 variants are moire structures that can be classified using simple geometric rules involving periodic and quasi-periodic structural motifs. In addition, LEEM reveals that linear defects form in the graphene sheets during cooling from the synthesis temperature. STM shows that these defects are ridges, suggesting that the graphene sheets delaminate locally as the Ir substrate contracts.
△ Less
Submitted 25 August, 2009; v1 submitted 7 April, 2009;
originally announced April 2009.
-
Factors influencing graphene growth on metal surfaces
Authors:
E. Loginova,
N. C. Bartelt,
P. J. Feibelman,
K. F. McCarty
Abstract:
Graphene forms from a relatively dense, tightly-bound C-adatom gas, when elemental C is deposited on or segregates to the Ru(0001) surface. Nonlinearity of the graphene growth rate with C adatom density suggests that growth proceeds by addition of C atom clusters to the graphene edge. The generality of this picture has now been studied by use of low-energy electron microscopy (LEEM) to observe g…
▽ More
Graphene forms from a relatively dense, tightly-bound C-adatom gas, when elemental C is deposited on or segregates to the Ru(0001) surface. Nonlinearity of the graphene growth rate with C adatom density suggests that growth proceeds by addition of C atom clusters to the graphene edge. The generality of this picture has now been studied by use of low-energy electron microscopy (LEEM) to observe graphene formation when Ru(0001) and Ir(111) surfaces are exposed to ethylene. The finding that graphene growth velocities and nucleation rates on Ru have precisely the same dependence on adatom concentration as for elemental C deposition implies that hydrocarbon decomposition only affects graphene growth through the rate of adatom formation; for ethylene, that rate decreases with increasing adatom concentration and graphene coverage. Initially, graphene growth on Ir(111) is like that on Ru: the growth velocity is the same nonlinear function of adatom concentration (albeit with much smaller equilibrium adatom concentrations, as we explain with DFT calculations of adatom formation energies). In the later stages of growth, graphene crystals that are rotated relative to the initial nuclei nucleate and grow. The rotated nuclei grow much faster. This difference suggests first, that the edge-orientation of the graphene sheets relative to the substrate plays an important role in the growth mechanism, and second, that attachment of the clusters to the graphene is the slowest step in cluster addition, rather than formation of clusters on the terraces.
△ Less
Submitted 7 April, 2009;
originally announced April 2009.
-
Kinetics and thermodynamics of carbon segregation and graphene growth on Ru(0001)
Authors:
Kevin F. McCarty,
Peter J. Feibelman,
Elena Loginova,
Norman C. Bartelt
Abstract:
We measure the concentration of carbon adatoms on the Ru(0001) surface that are in equilibrium with C atoms in the crystal's bulk by monitoring the electron reflectivity of the surface while imaging. During cooling from high temperature, C atoms segregate to the Ru surface, causing graphene islands to nucleate. Using low-energy electron microscopy (LEEM), we measure the growth rate of individual…
▽ More
We measure the concentration of carbon adatoms on the Ru(0001) surface that are in equilibrium with C atoms in the crystal's bulk by monitoring the electron reflectivity of the surface while imaging. During cooling from high temperature, C atoms segregate to the Ru surface, causing graphene islands to nucleate. Using low-energy electron microscopy (LEEM), we measure the growth rate of individual graphene islands and, simultaneously, the local concentration of C adatoms on the surface. We find that graphene growth is fed by the supersaturated, two-dimensional gas of C adatoms rather than by direct exchange between the bulk C and the graphene. At long times, the rate at which C diffuses from the bulk to the surface controls the graphene growth rate. The competition among C in three states - dissolved in Ru, as an adatom, and in graphene - is quantified and discussed. The adatom segregation enthalpy determined by applying the simple Langmuir-McLean model to the temperature-dependent equilibrium concentration seriously disagrees with the value calculated from first-principles. This discrepancy suggests that the assumption in the model of non-interacting C is not valid.
△ Less
Submitted 6 April, 2009;
originally announced April 2009.
-
How metal films de-wet substrates - identifying the kinetic pathways and energetic driving forces
Authors:
Kevin F. McCarty,
John C. Hamilton,
Yu Sato,
Angela Saa,
Roland Stumpf,
Juan de la Figuera,
Konrad Thurmer,
Frank Jones,
Andreas K. Schmid,
A. Alec Talin,
Norman C. Bartelt
Abstract:
We study how single-crystal chromium films of uniform thickness on W(110) substrates are converted to arrays of three-dimensional (3D) Cr islands during annealing. We use low-energy electron microscopy (LEEM) to directly observe a kinetic pathway that produces trenches that expose the wetting layer. Adjacent film steps move simultaneously uphill and downhill relative to the staircase of atomic s…
▽ More
We study how single-crystal chromium films of uniform thickness on W(110) substrates are converted to arrays of three-dimensional (3D) Cr islands during annealing. We use low-energy electron microscopy (LEEM) to directly observe a kinetic pathway that produces trenches that expose the wetting layer. Adjacent film steps move simultaneously uphill and downhill relative to the staircase of atomic steps on the substrate. This step motion thickens the film regions where steps advance. Where film steps retract, the film thins, eventually exposing the stable wetting layer. Since our analysis shows that thick Cr films have a lattice constant close to bulk Cr, we propose that surface and interface stress provide a possible driving force for the observed morphological instability. Atomistic simulations and analytic elastic models show that surface and interface stress can cause a dependence of film energy on thickness that leads to an instability to simultaneous thinning and thickening. We observe that de-wetting is also initiated at bunches of substrate steps in two other systems, Ag/W(110) and Ag/Ru(0001). We additionally describe how Cr films are converted into patterns of unidirectional stripes as the trenches that expose the wetting layer lengthen along the W[001] direction. Finally, we observe how 3D Cr islands form directly during film growth at elevated temperature. The Cr mesas (wedges) form as Cr film steps advance down the staircase of substrate steps, another example of the critical role that substrate steps play in 3D island formation.
△ Less
Submitted 6 April, 2009;
originally announced April 2009.
-
Nanoscale periodicity in stripe-forming systems at high temperature: Au/W(110)
Authors:
J. de la Figuera,
F. Leonard,
R. Stumpf,
N. C. Bartelt,
K. F. McCarty
Abstract:
We observe using low-energy electron microscopy the self-assembly of monolayer-thick stripes of Au on W(110) near the transition temperature between stripes and the non-patterned (homogeneous) phase. We demonstrate that the amplitude of this Au stripe phase decreases with increasing temperature and vanishes at the order-disorder transition (ODT). The wavelength varies much more slowly with tempe…
▽ More
We observe using low-energy electron microscopy the self-assembly of monolayer-thick stripes of Au on W(110) near the transition temperature between stripes and the non-patterned (homogeneous) phase. We demonstrate that the amplitude of this Au stripe phase decreases with increasing temperature and vanishes at the order-disorder transition (ODT). The wavelength varies much more slowly with temperature and coverage than theories of stress-domain patterns with sharp phase boundaries would predict, and maintains a finite value of about 100 nm at the ODT. We argue that such nanometer-scale stripes should often appear near the ODT.
△ Less
Submitted 8 April, 2008;
originally announced April 2008.
-
Labyrinthine Island Growth during Pd/Ru(0001) Heteroepitaxy
Authors:
Nicolas Rougemaille,
Farid El Gabaly,
Roland Stumpf,
Andreas K. Schmid,
Konrad Thürmer,
Norman C. Bartelt,
Juan De La Figuera
Abstract:
Using low energy electron microscopy we observe that Pd deposited on Ru only attaches to small sections of the atomic step edges surrounding Pd islands. This causes a novel epitaxial growth mode in which islands advance in a snakelike motion, giving rise to labyrinthine patterns. Based on density functional theory together with scanning tunneling microscopy and low energy electron microscopy we…
▽ More
Using low energy electron microscopy we observe that Pd deposited on Ru only attaches to small sections of the atomic step edges surrounding Pd islands. This causes a novel epitaxial growth mode in which islands advance in a snakelike motion, giving rise to labyrinthine patterns. Based on density functional theory together with scanning tunneling microscopy and low energy electron microscopy we propose that this growth mode is caused by a surface alloy forming around growing islands. This alloy gradually reduces step attachment rates, resulting in an instability that favors adatom attachment at fast advancing step sections.
△ Less
Submitted 15 November, 2007;
originally announced November 2007.
-
Electron reflectivity measurements of Ag adatom concentrations on W(110)
Authors:
J. de la Figuera,
N. C. Bartelt,
K. F. McCarty
Abstract:
The density of two-dimensional Ag adatom gases on W(110) is determined by monitoring local electron reflectivity using low energy electron microscopy (LEEM). This method of adatom concentration measurement can detect changes in adatom density at least as small as 10$^{-3}$ ML for a $μ$m size region of the surface. Using this technique at high temperatures, we measure the sublimation rates of Ag…
▽ More
The density of two-dimensional Ag adatom gases on W(110) is determined by monitoring local electron reflectivity using low energy electron microscopy (LEEM). This method of adatom concentration measurement can detect changes in adatom density at least as small as 10$^{-3}$ ML for a $μ$m size region of the surface. Using this technique at high temperatures, we measure the sublimation rates of Ag adatoms on W(110). At lower temperatures, where Ag adatoms condense into monolayer islands, we determine the temperature dependence of the density of adatoms coexisting with this condensed phase and compare it with previous estimates.
△ Less
Submitted 18 January, 2006;
originally announced January 2006.
