-
Beyond 1 ms Charge-Carrier Recombination Dynamics in the CsPbBr3 Perovskite
Authors:
A. Bojtor,
D. Krisztián,
F. Korsós,
S. Kollarics,
T. Pinel,
M. Kollár,
E. Horváth,
X. Mettan,
B. G. Márkus,
L. Forró,
F. Simon
Abstract:
Knowledge of the charge-carrier recombination lifetime, tau, is crucial for the various applications of photovoltaic perovskites. We studied the novel inorganic perovskite, CsPbBr3 and we observe recombination dynamics beyond 1 ms below 200 K and tau approaching 100 us at room temperature. Time-resolved microwave-detected photoconductivity decay (TRMCD), used in combination with injection dependen…
▽ More
Knowledge of the charge-carrier recombination lifetime, tau, is crucial for the various applications of photovoltaic perovskites. We studied the novel inorganic perovskite, CsPbBr3 and we observe recombination dynamics beyond 1 ms below 200 K and tau approaching 100 us at room temperature. Time-resolved microwave-detected photoconductivity decay (TRMCD), used in combination with injection dependence, evidence that tau is dominated by impurity charge trapping. The observed injection dependence is well corroborated by modeling of the trap mechanism. The ultra-long decay time is also consistent with photoconductivity measurements with a continuous-wave excitation at powers corresponding to around one Sun irradiation. While in principle charge-carrier trapping may limit the photovoltaic efficiency in single-cell photovoltaic devices, it could also lead to enhanced efficiency in tandem cells as well as for alternative applications including photodetection and quantum information storage.
△ Less
Submitted 25 June, 2023;
originally announced June 2023.
-
Ultra-long charge carrier recombination time in methylammonium lead halide perovskites
Authors:
A. Bojtor,
S. Kollarics,
B. G. Markus,
A. Sienkiewicz,
M. Kollar,
L. Forro,
F. Simon
Abstract:
Due to their exceptional photovoltaic properties, metal halide perovskites (MHPs) are extensively studied for their potential applications in solar cells. In recent years, the power conversion efficiencies of MHPs-based solar cells rapidly increased from the initial few \% towards more than 25\,\% for single-junction devices. Therefore, also taking into account their low costs and ease of manufact…
▽ More
Due to their exceptional photovoltaic properties, metal halide perovskites (MHPs) are extensively studied for their potential applications in solar cells. In recent years, the power conversion efficiencies of MHPs-based solar cells rapidly increased from the initial few \% towards more than 25\,\% for single-junction devices. Therefore, also taking into account their low costs and ease of manufacturing, MHPs-based solar cells have become the fastest-advancing photovoltaic technology. In this regard, much of the recent work has been dominated by absorber materials based on methylammonium MHPs, such as MAPbX$_3$, where MA=CH$_3$NH$_3$ and X=Cl, Br and I. Here, we present the results of contactless time-resolved photoconductivity measurements in an exceptionally wide range of temperatures of $4$ to $290\ \text{K}$ that were performed for the various crystalline forms of the three parent MAPbX$_3$, i.e., MAPbCl$_3$, MAPbBr$_3$ and MAPbI$_3$. This approach was made possible by the use of a high quality-factor (Q) microwave resonator, which cooperated with a commercially available microwave bridge equipped with an automatic frequency control (AFC) and a helium gas-flow cryostat.
△ Less
Submitted 11 August, 2022;
originally announced August 2022.
-
Ultrahigh nitrogen-vacancy center concentration in diamond
Authors:
S. Kollarics,
F. Simon,
A. Bojtor,
K. Koltai,
G. Klujber,
M. Szieberth,
B. G. Márkus,
D. Beke,
K. Kamarás,
A. Gali,
D. Amirari,
R. Berry,
S. Boucher,
D. Gavryushkin,
G. Jeschke,
J. P. Cleveland,
S. Takahashi,
P. Szirmai,
L. Forró,
E. Emmanouilidou,
R. Singh,
K. Holczer
Abstract:
High concentration of negatively charged nitrogen-vacancy ($\text{NV}^{-}$) centers was created in diamond single crystals containing approximately 100 ppm nitrogen using electron and neutron irradiation and subsequent thermal annealing in a stepwise manner. Continuous wave electron paramagnetic resonance (EPR) was used to determine the transformation efficiency from isolated N atoms to…
▽ More
High concentration of negatively charged nitrogen-vacancy ($\text{NV}^{-}$) centers was created in diamond single crystals containing approximately 100 ppm nitrogen using electron and neutron irradiation and subsequent thermal annealing in a stepwise manner. Continuous wave electron paramagnetic resonance (EPR) was used to determine the transformation efficiency from isolated N atoms to $\text{NV}^{-}$ centers in each production step and its highest value was as high as 17.5 %. Charged vacancies are formed after electron irradiation as shown by EPR spectra, but the thermal annealing restores the sample quality as the defect signal diminishes. We find that about 25 % of the vacancies form NVs during the annealing process. The large $\text{NV}^{-}$ concentration allows to observe orientation dependent spin-relaxation times and also the determination of the hyperfine and quadrupole coupling constants with high precision using electron spin echo (ESE) and electron-nuclear double resonance (ENDOR). We also observed the EPR signal associated with the so-called W16 centers, whose spectroscopic properties might imply a nitrogen dimer-vacancy center for its origin.
△ Less
Submitted 10 December, 2021; v1 submitted 5 October, 2021;
originally announced October 2021.
-
Optical-microwave pump-probe studies of electronic properties in novel materials
Authors:
S. Kollarics,
A. Bojtor,
K. Koltai,
B. G. Márkus,
K. Holczer,
J. Volk,
G. Klujber,
M. Szieberth,
F. Simon
Abstract:
Combined microwave-optical pump-probe methods are emerging to study the quantum state of spin qubit centers and the charge dynamics in semiconductors. A major hindrance is the limited bandwidth of microwave irradiation/detection circuitry which could be overcome with the use of broadband coplanar waveguides (CPW). We present the development and performance characterization of two spectrometers: an…
▽ More
Combined microwave-optical pump-probe methods are emerging to study the quantum state of spin qubit centers and the charge dynamics in semiconductors. A major hindrance is the limited bandwidth of microwave irradiation/detection circuitry which could be overcome with the use of broadband coplanar waveguides (CPW). We present the development and performance characterization of two spectrometers: an optically detected magnetic resonance spectrometer (ODMR) and a microwave detected photoconductivity measurement. In the first method light serves as detection and microwaves excite the investigated medium, while in the second the roles are interchanged. The performance is demonstrated by measuring ODMR maps on the nitrogen-vacancy center in diamond and time resolved photoconductivity in p-doped silicon. The results demonstrate both an efficient coupling of the microwave irradiation to the samples as well as an excellent sensitivity for minute changes in sample conductivity.
△ Less
Submitted 1 October, 2020;
originally announced October 2020.
-
Incidence of Quantum Confinement on Dark Triplet Excitons in Carbon Nanotubes
Authors:
J. Palotas,
M. Negyedi,
S. Kollarics,
A. Bojtor,
P. Rohringer,
Th. Pichler,
F. Simon
Abstract:
Photophysics of single-wall carbon nanotubes (SWCNTs) is intensively studied due to their potential application in light harvesting and optoelectronics. Excited states of SWCNTs form strongly bound electron-hole pairs, excitons, of which only singlet excitons participate in application relevant optical transitions. Long-living spin-triplet states hinder applications but they emerge as candidates f…
▽ More
Photophysics of single-wall carbon nanotubes (SWCNTs) is intensively studied due to their potential application in light harvesting and optoelectronics. Excited states of SWCNTs form strongly bound electron-hole pairs, excitons, of which only singlet excitons participate in application relevant optical transitions. Long-living spin-triplet states hinder applications but they emerge as candidates for quantum information storage. Therefore knowledge of the triplet exciton energy structure, in particular in a SWCNT chirality dependent manner, is greatly desired. We report the observation of light emission from triplet state recombination, i.e. phosphorescence, for several SWCNT chiralities using a purpose-built spectrometer. This yields the singlet-triplet gap as a function of SWCNT diameter and it follows predictions based on quantum confinement effects. Saturation under high microwave power (up to 10 W) irradiation allows to determine the spin-relaxation time for triplet states. Our study sensitively discriminates whether the lowest optically active state is populated from an excited state on the same nanotube or through Förster exciton energy transfer from a neighboring nanotube.
△ Less
Submitted 14 September, 2020;
originally announced September 2020.
-
Ultrafast sensing of photoconductivity decay using microwave resonators
Authors:
B. Gyüre-Garami,
B. Blum,
O. Sági,
A. Bojtor,
S. Kollarics,
G. Csősz,
B. G. Márkus,
J. Volk,
F. Simon
Abstract:
Microwave reflectance probed photoconductivity (or $μ$-PCD) measurement represents a contactless and non-invasive method to characterize impurity content in semiconductors. Major drawbacks of the method include a difficult separation of reflectance due to dielectric and conduction effects and that the $μ$-PCD signal is prohibitively weak for highly conducting samples. Both of these limitations cou…
▽ More
Microwave reflectance probed photoconductivity (or $μ$-PCD) measurement represents a contactless and non-invasive method to characterize impurity content in semiconductors. Major drawbacks of the method include a difficult separation of reflectance due to dielectric and conduction effects and that the $μ$-PCD signal is prohibitively weak for highly conducting samples. Both of these limitations could be tackled with the use of microwave resonators due to the well-known sensitivity of resonator parameters to minute changes in the material properties combined with a null measurement. A general misconception is that time resolution of resonator measurements is limited beyond their bandwidth by the readout electronics response time. While it is true for conventional resonator measurements, such as those employing a frequency sweep, we present a time-resolved resonator parameter readout method which overcomes these limitations and allows measurement of complex material parameters and to enhance $μ$-PCD signals with the ultimate time resolution limit being the resonator time constant. This is achieved by detecting the transient response of microwave resonators on the timescale of a few 100 ns \emph{during} the $μ$-PCD decay signal. The method employs a high-stability oscillator working with a fixed frequency which results in a stable and highly accurate measurement.
△ Less
Submitted 4 December, 2019; v1 submitted 30 September, 2019;
originally announced September 2019.
