-
Quantifying the contribution of material and junction resistances in nano-networks
Authors:
Cian Gabbett,
Adam G. Kelly,
Emmet Coleman,
Luke Doolan,
Tian Carey,
Kevin Synnatschke,
Shixin Liu,
Anthony Dawson,
Domhnall OSuilleabhain,
Jose Munuera,
Eoin Caffrey,
John B. Boland,
Zdenek Sofer,
Goutam Ghosh,
Sachin Kinge,
Laurens D. A. Siebbeles,
Neelam Yadav,
Jagdish K. Vij,
Muhammad Awais Aslam,
Aleksandar Matkovic,
Jonathan N. Coleman
Abstract:
Networks of nanowires and nanosheets are important for many applications in printed electronics. However, the network conductivity and mobility are usually limited by the inter-particle junction resistance, a property that is challenging to minimise because it is difficult to measure. Here, we develop a simple model for conduction in networks of 1D or 2D nanomaterials, which allows us to extract j…
▽ More
Networks of nanowires and nanosheets are important for many applications in printed electronics. However, the network conductivity and mobility are usually limited by the inter-particle junction resistance, a property that is challenging to minimise because it is difficult to measure. Here, we develop a simple model for conduction in networks of 1D or 2D nanomaterials, which allows us to extract junction and nanoparticle resistances from particle-size-dependent D.C. resistivity data of conducting and semiconducting materials. We find junction resistances in porous networks to scale with nanoparticle resistivity and vary from 5 Ohm for silver nanosheets to 25 GOhm for WS2 nanosheets. Moreover, our model allows junction and nanoparticle resistances to be extracted from A.C. impedance spectra of semiconducting networks. Impedance data links the high mobility (~7 cm2/Vs) of aligned networks of electrochemically exfoliated MoS2 nanosheets to low junction resistances of ~670 kOhm. Temperature-dependent impedance measurements allow us to quantitatively differentiate intra-nanosheet phonon-limited band-like transport from inter-nanosheet hopping for the first time.
△ Less
Submitted 28 November, 2023;
originally announced November 2023.
-
Knot Architecture for Biocompatible and Semiconducting Two-Dimensional Electronic Fibre Transistors
Authors:
Tian Carey,
Jack Maughan,
Luke Doolan,
Eoin Caffrey,
James Garcia,
Shixin Liu,
Harneet Kaur,
Cansu Ilhan,
Shayan Seyedin,
Jonathan N. Coleman
Abstract:
In recent years, the rising demand for close interaction with electronic devices has led to a surge in the popularity of wearable gadgets. While wearable gadgets have generally been rigid due to their utilisation of silicon-based technologies, flexible semiconducting fibre-based transistors will be needed for future wearables as active sensing components or within microprocessors to manage and ana…
▽ More
In recent years, the rising demand for close interaction with electronic devices has led to a surge in the popularity of wearable gadgets. While wearable gadgets have generally been rigid due to their utilisation of silicon-based technologies, flexible semiconducting fibre-based transistors will be needed for future wearables as active sensing components or within microprocessors to manage and analyse data. Two-dimensional (2D) semiconducting flakes are yet to be investigated in fibre transistors but could offer a route toward high-mobility, biocompatible and flexible fibre-based devices. Here we report the electrochemical exfoliation of semiconducting two-dimensional (2D) flakes of tungsten diselenide (WSe2) and molybdenum disulfide (MoS2). The high aspect ratio (>100) of the flakes achieves aligned and conformal flake-to-flake junctions on polyester fibres enabling transistors with mobilities ~ 1 cm^2 V^-1 s^-1 and a current on/off ratio, Ion/Ioff ~ 10^2 - 10^4. Furthermore, the cytotoxic effects of the MoS2 and WSe2 flakes with human keratinocyte cells are investigated and found to be biocompatible. As an additional step, we create a unique transistor knot architecture by leveraging the fibre diameter to establish the length of the transistor channel, facilitating a route to scale down transistor channel dimensions (100 μm) and utilise it to make MoS2 fibre transistors with a human hair that achieves mobilities as high as μ ~ 15 cm^2 V^-1 s^-1.
△ Less
Submitted 4 November, 2023;
originally announced November 2023.
-
3D-imaging of Printed Nanostructured Networks using High-resolution FIB-SEM Nanotomography
Authors:
Cian Gabbett,
Luke Doolan,
Kevin Synnatschke,
Laura Gambini,
Emmet Coleman,
Adam G. Kelly,
Shixin Liu,
Eoin Caffrey,
Jose Munuera,
Catriona Murphy,
Stefano Sanvito,
Lewys Jones,
Jonathan N. Coleman
Abstract:
Networks of solution-processed nanomaterials are important for multiple applications in electronics, sensing and energy storage/generation. While it is known that network morphology plays a dominant role in determining the physical properties of printed networks, it remains difficult to quantify network structure. Here, we utilise FIB-SEM nanotomography to characterise the morphology of nanostruct…
▽ More
Networks of solution-processed nanomaterials are important for multiple applications in electronics, sensing and energy storage/generation. While it is known that network morphology plays a dominant role in determining the physical properties of printed networks, it remains difficult to quantify network structure. Here, we utilise FIB-SEM nanotomography to characterise the morphology of nanostructured networks. Nanometer-resolution 3D-images were obtained from printed networks of graphene nanosheets of various sizes, as well as networks of WS2 nanosheets, silver nanosheets and silver nanowires. Important morphological characteristics, including network porosity, tortuosity, pore dimensions and nanosheet orientation were extracted and linked to network resistivity. By extending this technique to interrogate the structure and interfaces within vertical printed heterostacks, we demonstrate the potential of this technique for device characterisation and optimisation.
△ Less
Submitted 26 January, 2023;
originally announced January 2023.
-
Equipartition of Energy Defines the Size-Thickness Relationship in Liquid-Exfoliated Nanosheets
Authors:
Claudia Backes,
Davide Campi,
Beata M. Szydlowska,
Kevin Synnatschke,
Ezgi Ojala,
Farnia Rashvand,
Andrew Harvey,
Aideen Griffin,
Zdenek Sofer,
Nicola Marzari,
Jonathan N. Coleman,
David D. O'Regan
Abstract:
Liquid phase exfoliation is a commonly used method to produce 2D nanosheets from a range of layered crystals. However, such nanosheets display broad size and thickness distributions and correlations between area and thickness, issues that limit nanosheet application potential. To understand the factors controlling the exfoliation process, we have liquid-exfoliated 11 different layered materials, s…
▽ More
Liquid phase exfoliation is a commonly used method to produce 2D nanosheets from a range of layered crystals. However, such nanosheets display broad size and thickness distributions and correlations between area and thickness, issues that limit nanosheet application potential. To understand the factors controlling the exfoliation process, we have liquid-exfoliated 11 different layered materials, size-selecting each into fractions before using AFM to measure the nanosheet length, width, and thickness distributions for each fraction. The resultant data show a clear power-law scaling of nanosheet area with thickness for each material. We have developed a simple nonequilibrium thermodynamics-based model predicting that the power-law prefactor is proportional to both the ratios of in-plane-tearing/out-of-plane-peeling energies and in-plane/out-of-plane moduli. By comparing the experimental data with the modulus ratio calculated from first-principles, we find close agreement between experiment and theory. This supports our hypothesis that energy equipartition holds between nanosheet tearing and peeling during sonication-assisted exfoliation.
△ Less
Submitted 26 June, 2020;
originally announced June 2020.
-
Quantifying the effect of electrical conductivity on the rate-performance of nanocomposite battery electrodes
Authors:
Ruiyuan Tian,
Nolito Alcala,
Stephen JK ONeill,
Dominik Horvath,
Joao Coelho,
Aideen Griffin,
Yan Zhang,
Valeria Nicolosi,
Colm ODwyer,
Jonathan N Coleman
Abstract:
While it is well-known that electrode conductivity has a critical impact on rate-performance in battery electrodes, this relationship has been quantified only by computer simulations. Here we investigate the relationship between electrode conductivity and rate-performance in Lithium-Nickel-Manganese-Cobalt-Oxide (NMC) cathodes filled with various quantities of carbon black, single-walled carbon na…
▽ More
While it is well-known that electrode conductivity has a critical impact on rate-performance in battery electrodes, this relationship has been quantified only by computer simulations. Here we investigate the relationship between electrode conductivity and rate-performance in Lithium-Nickel-Manganese-Cobalt-Oxide (NMC) cathodes filled with various quantities of carbon black, single-walled carbon nanotubes and graphene. The electrode conductivity is always extremely anisotropic with the out-of-plane conductivity, which is most relevant to rate-performance, roughly 1000 smaller than the in-plane conductivity. For all fillers the conductivity increases with filler loading although the nanotube-filled electrodes show by far the most rapid increase. Fitting capacity versus rate curves yielded the characteristic time associated with charge/discharge. This parameter increased linearly with the inverse of the out-of-plane conductivity, with all data points falling on the same master curve. Using a simple mechanistic model for the characteristic time, we develop an equation which matches the experimental data almost perfectly with no adjustable parameters. This implies that increasing the electrode conductivity improves the rate-performance by decreasing the RC charging time of the electrode. This model shows the effect of electrode resistance on the rate-performance to become negligible in almost all cases once the out-of-plane conductivity of the electrode exceeds 1 S/m. Our results show that this can be achieved by including <1wt% single-walled carbon nanotubes in the electrode.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Do 2D material-based battery electrodes have inherently poor rate-performance?
Authors:
Ruiyuan Tian,
Madeleine Breshears,
Dominik V Horvath,
Jonathan N Coleman
Abstract:
Two dimensional materials show great potential for use in battery electrodes and are believed to be particularly promising for high-rate applications. However, there does not seem to be much hard evidence for the superior rate-performance of 2D materials compared to non-2D materials. To examine this point, we have analyzed published rate-performance data for a wide range of 2D materials as well as…
▽ More
Two dimensional materials show great potential for use in battery electrodes and are believed to be particularly promising for high-rate applications. However, there does not seem to be much hard evidence for the superior rate-performance of 2D materials compared to non-2D materials. To examine this point, we have analyzed published rate-performance data for a wide range of 2D materials as well as non-2D materials for comparison. For each capacity-rate curve we extract parameters which quantify performance which can then be analyzed using a simple mechanistic model. Contrary to expectations, by comparing a previously-proposed figure of merit, we find 2D-based electrodes to be on average ~40 times poorer in terms of rate performance than non-2D materials. This is not due to differences in solid-state diffusion times which were similarly distributed for 2D and non-2D materials. In fact, we found the main difference between 2D and non-2D materials to be that ion mobility within the electrolyte-filled pores of the electrodes to be significantly lower for 2D materials, a situation which we attribute to their high aspect ratios.
△ Less
Submitted 5 December, 2019;
originally announced December 2019.
-
Quantifying the factors limiting rate-performance in battery electrodes
Authors:
Ruiyuan Tian,
Sang-Hoon Park,
Paul J. King,
Graeme Cunningham,
Joao Coelho,
Valeria Nicolosi,
Jonathan N Coleman
Abstract:
A significant problem associated with batteries is the rapid reduction of charge-storage capacity with increasing charge/discharge rate. For example, improving this rate-performance is required for fast-charging of car batteries. Rate-performance is related to the timescales associated with charge or ionic motion in both electrode and electrolyte. However, no quantitative model exists which can be…
▽ More
A significant problem associated with batteries is the rapid reduction of charge-storage capacity with increasing charge/discharge rate. For example, improving this rate-performance is required for fast-charging of car batteries. Rate-performance is related to the timescales associated with charge or ionic motion in both electrode and electrolyte. However, no quantitative model exists which can be used to fit experimental data to give insights into the dominant rate-limiting processes in a given electrode-electrolyte system. Here we develop an equation which can be used to fit capacity versus rate data, outputting three parameters which fully describe rate-performance. Most important is the characteristic time associated with charge/discharge which can be expressed by a simple equation with terms describing each rate-limiting process, thus linking rate-performance to measurable physical parameters. We have fitted these equations to ~200 data sets from ~50 papers, finding exceptional agreement, and allowing parameters such as diffusion coefficients or electrolyte conductivities to be extracted. By estimating relevant physical parameters, it is possible to show which rate-limiting processes are dominant in a given situation, facilitating rational design and cell optimization. In addition, this model predicts the upper speed limit for Li/Na ion batteries, in agreement with the fastest electrodes in the literature.
△ Less
Submitted 25 October, 2018;
originally announced October 2018.
-
Spectroscopic size and thickness metrics for liquid-exfoliated h-BN
Authors:
Aideen Griffin,
Andrew Harvey,
Brian Cunningham,
Declan Scullion,
Tian Tian,
Chih-Jen Shih,
Myrta Gruening,
John Donegan,
Elton J. G. Santos,
Claudia Backes,
Jonathan N. Coleman
Abstract:
For many 2D materials, optical and Raman spectra are richly structured, and convey information on a range of parameters including nanosheet size and defect content. By contrast, the equivalent spectra for h-BN are relatively simple, with both the absorption and Raman spectra consisting of a single feature each, disclosing relatively little information. Here, the ability to size-select liquid-exfol…
▽ More
For many 2D materials, optical and Raman spectra are richly structured, and convey information on a range of parameters including nanosheet size and defect content. By contrast, the equivalent spectra for h-BN are relatively simple, with both the absorption and Raman spectra consisting of a single feature each, disclosing relatively little information. Here, the ability to size-select liquid-exfoliated h-BN nanosheets has allowed us to comprehensively study the dependence of h-BN optical spectra on nanosheet dimensions. We find the optical extinction coefficient spectrum to vary systematically with nanosheet lateral size due to the presence of light scattering. Conversely, once light scattering has been decoupled to give the optical absorbance spectra, we find the size dependence to be mostly removed save for a weak but well-defined variation in energy of peak absorbance with nanosheet thickness. This finding is corroborated by our ab initio GW and Bethe-Salpeter equation calculations, which include electron correlations and quasiparticle self-consistency (QSGW). In addition, while we find the position of the sole h-BN Raman line to be invariant with nanosheet dimensions, the linewidth appears to vary weakly with nanosheet thickness. These size-dependent spectroscopic properties can be used as metrics to estimate nanosheet thickness from spectroscopic data.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Revealing the nature of excitons in liquid exfoliated monolayer WS2
Authors:
Ł. Kłopotowski,
C. Backes,
A. A. Mitioglu,
V. Vega-Mayoral,
D. Hanlon,
J. N. Coleman,
V. Y. Ivanov,
D. K. Maude,
P. Plochocka
Abstract:
Transition metal dichalcogenides hold promise for applications in novel optoelectronic devices. There is therefore a need for materials that can be obtained in large quantities and with well understood optical properties. In this report, we present a thorough photoluminescence (PL) investigations of monolayer tungsten disulphide obtained via liquid phase exfoliation. As shown by microscopy studies…
▽ More
Transition metal dichalcogenides hold promise for applications in novel optoelectronic devices. There is therefore a need for materials that can be obtained in large quantities and with well understood optical properties. In this report, we present a thorough photoluminescence (PL) investigations of monolayer tungsten disulphide obtained via liquid phase exfoliation. As shown by microscopy studies, the exfoliated nanosheets have dimensions of tens of nanometers and thickness of 2.5 monolayers on average. The monolayer content is about 20%. Our studies show that at low temperature the photoluminescence is dominated by excitons localized on nanosheet edges. As a consequence, the PL is strongly sensitive to environment and exhibits an enhanced splitting in magnetic field. As the temperature is increased, the excitons are thermally excited out of the defect states and the dominant transition is that of the negatively charged exciton. Furthermore, upon excitation with a circularly polarized light, the PL retains a degree of polarization reaching 50% and inherited from the valley polarized photoexcited excitons. The studies of PL dynamics reveal that the PL lifetime is on the order of 10 ps, probably limited by non-radiative processes. Our results underline the potential of liquid exfoliated TMD monolayers in large scale optoelectronic devices.
△ Less
Submitted 3 January, 2018;
originally announced January 2018.
-
Probing the local nature of excitons and plasmons in few-layer MoS2
Authors:
Hannah Catherine Nerl,
Kirsten Trøstrup Winther,
Fredrik Sydow Hage,
Kristian Sommer Thygesen,
Lothar Houben,
Claudia Backes,
Jonathan N Coleman,
Quentin M Ramasse,
Valeria Nicolosi
Abstract:
Excitons and plasmons are the two most fundamental types of collective electronic excitations occurring in solids. Traditionally, they have been studied separately using bulk techniques that probe their average energetic structure over large spatial regions. However, as the dimensions of materials and devices continue to shrink, it becomes crucial to understand how these excitations depend on loca…
▽ More
Excitons and plasmons are the two most fundamental types of collective electronic excitations occurring in solids. Traditionally, they have been studied separately using bulk techniques that probe their average energetic structure over large spatial regions. However, as the dimensions of materials and devices continue to shrink, it becomes crucial to understand how these excitations depend on local variations in the crystal- and chemical structure on the atomic scale. Here we use monochromated low-loss scanning-transmission-electron-microscopy electron-energy-loss (LL-STEM-EEL) spectroscopy, providing the best simultaneous energy and spatial resolution achieved to-date to unravel the full set of electronic excitations in few-layer MoS2 nanosheets over a wide energy range. Using first-principles many-body calculations we confirm the excitonic nature of the peaks at ~2eV and ~3eV in the experimental EEL spectrum and the plasmonic nature of higher energy-loss peaks. We also rationalise the non-trivial dependence of the EEL spectrum on beam and sample geometry such as the number of atomic layers and distance to steps and edges. Moreover, we show that the excitonic features are dominated by the long wavelength (q=0) components of the probing field, while the plasmonic features are sensitive to a much broader range of q-vectors, indicating a qualitative difference in the spatial character of the two types of collective excitations. Our work provides a template protocol for mapping the local nature of electronic excitations that open new possibilities for studying photo-absorption and energy transfer processes on a nanometer scale.
△ Less
Submitted 13 April, 2017; v1 submitted 1 February, 2017;
originally announced February 2017.
-
Relating the optical absorption coefficient of nanosheet dispersions to the intrinsic monolayer absorption
Authors:
Keith R. Paton,
Jonathan N. Coleman
Abstract:
The concentration of nanosheet suspensions is an important technological parameter which is commonly measured by optical spectroscopy using the absorption coefficient to transform absorbance into concentration. However for all 2D materials, the absorption coefficient is poorly known, resulting in potentially large errors in measured concentration. Here we derive an expression relating the optical…
▽ More
The concentration of nanosheet suspensions is an important technological parameter which is commonly measured by optical spectroscopy using the absorption coefficient to transform absorbance into concentration. However for all 2D materials, the absorption coefficient is poorly known, resulting in potentially large errors in measured concentration. Here we derive an expression relating the optical absorption coefficient of an isotropic ensemble of nanosheets to the intrinsic monolayer absorption. This has allowed us to calculate the absorption coefficients for suspensions of graphene, MoS2 and other 2D materials and allows estimation of the monolayer absorption for new materials from careful measurement of the suspension absorption coefficient.
△ Less
Submitted 13 November, 2015;
originally announced November 2015.
-
Mapping of Low-Frequency Raman Modes in CVD-Grown Transition Metal Dichalcogenides: Layer Number, Stacking Orientation and Resonant Effects
Authors:
Maria OBrien,
Niall McEvoy,
Damien Hanlon,
Toby Hallam,
Jonathan N. Coleman,
Georg S. Duesberg
Abstract:
Layered inorganic materials, such as the transition metal dichalcogenides (TMDs), have attracted much attention due to their exceptional electronic and optical properties. Reliable synthesis and characterization of these materials must be developed if these properties are to be exploited. Herein, we present low-frequency Raman analysis of MoS2, MoSe2, WSe2 and WS2 grown by chemical vapour depositi…
▽ More
Layered inorganic materials, such as the transition metal dichalcogenides (TMDs), have attracted much attention due to their exceptional electronic and optical properties. Reliable synthesis and characterization of these materials must be developed if these properties are to be exploited. Herein, we present low-frequency Raman analysis of MoS2, MoSe2, WSe2 and WS2 grown by chemical vapour deposition (CVD). Raman spectra are acquired over large areas allowing changes in the position and intensity of the shear and layer-breathing modes to be visualized in maps. This allows detailed characterization of mono- and few-layered TMDs which is complementary to well-established (high-frequency) Raman and photoluminescence spectroscopy. This study presents a major stepping stone in fundamental understanding of layered materials as mapping the low-frequency modes allows the quality, symmetry, stacking configuration and layer number of 2D materials to be probed over large areas. In addition, we report on anomalous resonance effects in the low-frequency region of the WS2 Raman spectrum.
△ Less
Submitted 8 December, 2015; v1 submitted 4 August, 2015;
originally announced August 2015.
-
Low wavenumber Raman spectroscopy of highly crystalline MoSe2 grown by chemical vapor deposition
Authors:
Maria O'Brien,
Niall McEvoy,
Damien Hanlon,
Kangho Lee,
Riley Gatensby,
Jonathan N. Coleman,
Georg S. Duesberg
Abstract:
Transition metal dichalcogenides (TMDs) have recently attracted attention due to their interesting electronic and optical properties. Fabrication of these materials in a reliable and facile method is important for future applications, as are methods to characterize material quality. Here we present the chemical vapor deposition of MoSe2 monolayer and few layer crystals. These results show the prac…
▽ More
Transition metal dichalcogenides (TMDs) have recently attracted attention due to their interesting electronic and optical properties. Fabrication of these materials in a reliable and facile method is important for future applications, as are methods to characterize material quality. Here we present the chemical vapor deposition of MoSe2 monolayer and few layer crystals. These results show the practicality of using chemical vapor deposition to reliably fabricate these materials. Low frequency Raman spectra and mapping of shear and layer breathing modes of MoSe2 are presented for the first time. We correlate the behavior of these modes with layer number in the materials. The usefulness of low frequency Raman mapping to probe the symmetry, quality, and monolayer presence in CVD grown 2D materials is emphasized.
△ Less
Submitted 9 May, 2015;
originally announced May 2015.
-
Liquid exfoliation of solvent-stabilised black phosphorus: applications beyond electronics
Authors:
Damien Hanlon,
Claudia Backes,
Evie Doherty,
Clotilde S. Cucinotta,
Nina C. Berner,
Conor Boland,
Kangho Lee,
Peter Lynch,
Zahra Gholamvand,
Andrew Harvey,
Saifeng Zhang,
Kangpeng Wang,
Glenn Moynihan,
Anuj Pokle,
Quentin M. Ramasse,
Niall McEvoy,
Werner J. Blau,
Jun Wang,
Stefano Sanvito,
David D. ORegan,
Georg S. Duesberg,
Valeria Nicolosi,
Jonathan N. Coleman
Abstract:
Few layer black phosphorus is a new two-dimensional material which is of great interest for applications, mainly in electronics. However, its lack of stability severely limits our ability to synthesise and process this material. Here we demonstrate that high-quality, few-layer black phosphorus nanosheets can be produced in large quantities by liquid phase exfoliation in the solvent N-cyclohexyl-2-…
▽ More
Few layer black phosphorus is a new two-dimensional material which is of great interest for applications, mainly in electronics. However, its lack of stability severely limits our ability to synthesise and process this material. Here we demonstrate that high-quality, few-layer black phosphorus nanosheets can be produced in large quantities by liquid phase exfoliation in the solvent N-cyclohexyl-2-pyrrolidone (CHP). We can control nanosheet dimensions and have developed metrics to estimate both nanosheet size and thickness spectroscopically. When exfoliated in CHP, the nanosheets are remarkably stable unless water is intentionally introduced. Computational studies show the degradation to occur by reaction with water molecules only at the nanosheet edge, leading to the removal of phosphorus atoms and the formation of phosphine and phosphorous acid. We demonstrate that liquid exfoliated black phosphorus nanosheets are potentially useful in a range of applications from optical switches to gas sensors to fillers for composite reinforcement.
△ Less
Submitted 8 January, 2015;
originally announced January 2015.
-
Biocompatibility of Pristine Graphene Monolayers, Nanosheets and Thin Films
Authors:
Jennifer Conroy,
Navin K. Verma,
Ronan J. Smith,
Ehsan Rezvani,
Georg S. Duesberg,
Jonathan N. Coleman,
Yuri Volkov
Abstract:
There is an increasing interest to develop nanoscale biocompatible graphene structures due to their desirable physicochemical properties, unlimited application opportunities and scalable production. Here we report the preparation, characterization and biocompatibility assessment of novel graphene flakes and their enabled thin films suitable for a wide range of biomedical and electronic application…
▽ More
There is an increasing interest to develop nanoscale biocompatible graphene structures due to their desirable physicochemical properties, unlimited application opportunities and scalable production. Here we report the preparation, characterization and biocompatibility assessment of novel graphene flakes and their enabled thin films suitable for a wide range of biomedical and electronic applications. Graphene flakes were synthesized by a chemical vapour deposition method or a liquid-phase exfoliation procedure and then thin films were prepared by transferring graphene onto glass coverslips. Raman spectroscopy and transmission electron microscopy confirmed a predominantly monolayer and a high crystalline quality formation of graphene. The biocompatibility assessment of graphene thin films and graphene flakes was performed using cultured human lung epithelial cell line A549 employing a multimodal approach incorporating automated imaging, high content screening, real-time impedance sensing in combination with biochemical assays. No detectable changes in the cellular morphology or attachment of A549 cells growing on graphene thin films or cells exposed to graphene flakes (0.1 to 5 ug/mL) for 4 to 72 h was observed. Graphene treatments caused a very low level of increase in cellular production of reactive oxygen species in A549 cells, but no detectable damage to the nuclei such as changes in morphology, condensation or fragmentation was observed. In contrast, carbon black proved to be significantly more toxic than the graphene. These data open up a promising view of using graphene enabled composites for a diverse scope of safer applications.
△ Less
Submitted 10 June, 2014;
originally announced June 2014.
-
Upper bound for the conductivity of nanotube networks
Authors:
Luiz F. C. Pereira,
C. G. Rocha,
A. Latgé,
J. N. Coleman,
M. S. Ferreira
Abstract:
Films composed of nanotube networks have their conductivities regulated by the junction resistances formed between tubes. Conductivity values are enhanced by lower junction resistances but should reach a maximum that is limited by the network morphology. By considering ideal ballistic-like contacts between nanotubes we use the Kubo formalism to calculate the upper bound for the conductivity of s…
▽ More
Films composed of nanotube networks have their conductivities regulated by the junction resistances formed between tubes. Conductivity values are enhanced by lower junction resistances but should reach a maximum that is limited by the network morphology. By considering ideal ballistic-like contacts between nanotubes we use the Kubo formalism to calculate the upper bound for the conductivity of such films and show how it depends on the nanotube concentration as well as on their aspect ratio. Highest measured conductivities reported so far are approaching this limiting value, suggesting that further progress lies with nanowires other than nanotubes.
△ Less
Submitted 2 September, 2009; v1 submitted 26 June, 2009;
originally announced June 2009.
-
Graphene under hydrostatic pressure
Authors:
John E. Proctor,
Eugene Gregoryanz,
Konstantin S. Novoselov,
Mustafa Lotya,
Jonathan N. Coleman,
Matthew P. Halsall
Abstract:
In-situ high pressure Raman spectroscopy is used to study monolayer, bilayer and few-layer graphene samples supported on silicon in a diamond anvil cell to 3.5 GPa. The results show that monolayer graphene adheres to the silicon substrate under compressive stress. A clear trend in this behaviour as a function of graphene sample thickness is observed. We also study unsupported graphene samples in…
▽ More
In-situ high pressure Raman spectroscopy is used to study monolayer, bilayer and few-layer graphene samples supported on silicon in a diamond anvil cell to 3.5 GPa. The results show that monolayer graphene adheres to the silicon substrate under compressive stress. A clear trend in this behaviour as a function of graphene sample thickness is observed. We also study unsupported graphene samples in a diamond anvil cell to 8 GPa, and show that the properties of graphene under compression are intrinsically similar to graphite. Our results demonstrate the differing effects of uniaxial and biaxial strain on the electronic bandstructure.
△ Less
Submitted 3 August, 2009; v1 submitted 19 May, 2009;
originally announced May 2009.
-
High yield production of graphene by liquid phase exfoliation of graphite
Authors:
Y. Hernandez,
V. Nicolosi,
M. Lotya,
F. Blighe,
Z. Sun,
S. De,
I. T. McGovern,
B. Holland,
M. Byrne,
Y. Gunko,
J. Boland,
P. Niraj,
G. Duesberg,
S. Krishnamurti,
R. Goodhue,
J. Hutchison,
V. Scardaci,
A. C. Ferrari,
J. N. Coleman
Abstract:
Graphene is at the centre of nanotechnology research. In order to fully exploit its outstanding properties, a mass production method is necessary. Two main routes are possible: large-scale growth or large-scale exfoliation. Here, we demonstrate graphene dispersions with concentrations up to ~0.01 mg/ml by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone. Th…
▽ More
Graphene is at the centre of nanotechnology research. In order to fully exploit its outstanding properties, a mass production method is necessary. Two main routes are possible: large-scale growth or large-scale exfoliation. Here, we demonstrate graphene dispersions with concentrations up to ~0.01 mg/ml by dispersion and exfoliation of graphite in organic solvents such as N-methyl-pyrrolidone. This occurs because the energy required to exfoliate graphene is balanced by the solvent-graphene interaction for solvents whose surface energy matches that of graphene. We confirm the presence of individual graphene sheets with yields of up to 12% by mass, using absorption spectroscopy, transmission electron microscopy and electron diffraction. The absence of defects or oxides is confirmed by X-ray photoelectron, infra-red and Raman spectroscopies. We can produce conductive, semi-transparent films and conductive composites. Solution processing of graphene opens up a whole range of potential large-scale applications from device or sensor fabrication to liquid phase chemistry.
△ Less
Submitted 19 May, 2008;
originally announced May 2008.
