-
Thermal noise of a cryo-cooled silicon cantilever locally heated up to its melting point
Authors:
Alex Fontana,
Richard Pedurand,
Vincent Dolique,
Ghaouti Hansali,
Ludovic Bellon
Abstract:
The Fluctuation-Dissipation Theorem (FDT) is a powerful tool to estimate the thermal noise of physical systems in equilibrium. In general however, thermal equilibrium is an approximation, or cannot be assumed at all. A more general formulation of the FDT is then needed to describe the behavior of the fluctuations. In our experiment we study a micro-cantilever brought out-ofequilibrium by a strong…
▽ More
The Fluctuation-Dissipation Theorem (FDT) is a powerful tool to estimate the thermal noise of physical systems in equilibrium. In general however, thermal equilibrium is an approximation, or cannot be assumed at all. A more general formulation of the FDT is then needed to describe the behavior of the fluctuations. In our experiment we study a micro-cantilever brought out-ofequilibrium by a strong heat flux generated by the absorption of the light of a laser. While the base is kept at cryogenic temperatures, the tip is heated up to the melting point, thus creating the highest temperature difference the system can sustain. We independently estimate the temperature profile of the cantilever and its mechanical fluctuations, as well as its dissipation. We then demonstrate how the thermal fluctuations of all the observed degrees of freedom, though increasing with the heat flux, are much lower than what is expected from the average temperature of the system. We interpret these results thanks to a minimal extension of the FDT: this dearth of thermal noise arises from a dissipation shared between clamping losses and distributed damping.
△ Less
Submitted 7 October, 2021; v1 submitted 22 January, 2021;
originally announced January 2021.
-
Suppression of surface-related loss in a gated semiconductor microcavity
Authors:
Daniel Najer,
Natasha Tomm,
Alisa Javadi,
Alexander R. Korsch,
Benjamin Petrak,
Daniel Riedel,
Vincent Dolique,
Sascha R. Valentin,
Rüdiger Schott,
Andreas D. Wieck,
Arne Ludwig,
Richard J. Warburton
Abstract:
We present a surface passivation method that reduces surface-related losses by almost two orders of magnitude in a highly miniaturized GaAs open microcavity. The microcavity consists of a curved dielectric distributed Bragg reflector (DBR) with radius $\sim 10$ $μ$m paired with a GaAs-based heterostructure. The heterostructure consists of a semiconductor DBR followed by an n-i-p diode with a layer…
▽ More
We present a surface passivation method that reduces surface-related losses by almost two orders of magnitude in a highly miniaturized GaAs open microcavity. The microcavity consists of a curved dielectric distributed Bragg reflector (DBR) with radius $\sim 10$ $μ$m paired with a GaAs-based heterostructure. The heterostructure consists of a semiconductor DBR followed by an n-i-p diode with a layer of quantum dots in the intrinsic region. Free-carrier absorption in the highly doped n- and p-layers is minimized by positioning them close to a node of the vacuum electromagnetic-field. The surface, however, resides at an anti-node of the vacuum field and results in significant loss. These losses are much reduced by surface passivation. The strong dependence on wavelength implies that the main effect of the surface passivation is to eliminate the surface electric field, thereby quenching below-bandgap absorption via a Franz-Keldysh-like effect. An additional benefit is that the surface passivation reduces scattering at the GaAs surface. These results are important in other nano-photonic devices which rely on a GaAs-vacuum interface to confine the electromagnetic field.
△ Less
Submitted 17 February, 2021; v1 submitted 9 December, 2020;
originally announced December 2020.
-
Amorphous optical coatings of present gravitational-wave interferometers
Authors:
Massimo Granata,
Alex Amato,
Laurent Balzarini,
Maurizio Canepa,
Jérôme Degallaix,
Danièle Forest,
Vincent Dolique,
Lorenzo Mereni,
Christophe Michel,
Laurent Pinard,
Benoît Sassolas,
Julien Teillon,
Gianpietro Cagnoli
Abstract:
We report on the results of an extensive campaign of optical and mechanical characterization of the ion-beam sputtered oxide layers (Ta$_2$O$_5$, TiO$_2$, Ta$_2$O$_5$-TiO$_2$, SiO$_2$) within the high-reflection coatings of the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors: refractive index, thickness, optical absorption, composition, density, internal friction and elastic c…
▽ More
We report on the results of an extensive campaign of optical and mechanical characterization of the ion-beam sputtered oxide layers (Ta$_2$O$_5$, TiO$_2$, Ta$_2$O$_5$-TiO$_2$, SiO$_2$) within the high-reflection coatings of the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors: refractive index, thickness, optical absorption, composition, density, internal friction and elastic constants have been measured; the impact of deposition rate and post-deposition annealing on coating internal friction has been assessed. For Ta$_2$O$_5$ and SiO$_2$ layers, coating internal friction increases with the deposition rate, whereas the annealing treatment either erases or largely reduces the gap between samples with different deposition history. For Ta$_2$O$_5$-TiO$_2$ layers, the reduction of internal friction due to TiO$_2$ doping becomes effective only if coupled with annealing. All measured samples showed a weak dependence of internal friction on frequency ($φ_c(f) = af^{b}$, with $-0.208 < b < 0.140$ depending on the coating material considered). SiO$_2$ films showed a mode-dependent loss branching, likely due to spurious losses at the coated edge of the samples. The reference loss values of the Advanced LIGO and Advanced Virgo input (ITM) and end (ETM) mirror HR coatings have been updated by using our estimated value of Young's modulus of Ta$_2$O$_5$-TiO$_2$ layers (120 GPa) and are about 10\% higher than previous estimations.
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
Correlated evolution of structure and mechanical loss of a sputtered silica film
Authors:
Massimo Granata,
Elodie Coillet,
Valérie Martinez,
Vincent Dolique,
Alex Amato,
Maurizio Canepa,
Jérémie Margueritat,
Christine Martinet,
Alain Mermet,
Christophe Michel,
Laurent Pinard,
Benoît Sassolas,
Gianpietro Cagnoli
Abstract:
Energy dissipation in amorphous coatings severely affects high-precision optical and quantum transducers. In order to isolate the source of coating loss, we performed an extensive study of Raman scattering and mechanical loss of a thermally-treated sputtered silica coating. Our results show that loss is correlated with the population of three-membered rings of Si-O$_4$ tetrahedral units, and suppo…
▽ More
Energy dissipation in amorphous coatings severely affects high-precision optical and quantum transducers. In order to isolate the source of coating loss, we performed an extensive study of Raman scattering and mechanical loss of a thermally-treated sputtered silica coating. Our results show that loss is correlated with the population of three-membered rings of Si-O$_4$ tetrahedral units, and support the evidence that thermal treatment reduces the density of metastable states separated by a characteristic energy of about 0.5 eV, in favour of an increase of the states separated by smaller activation energies. Finally, we conclude that three-fold rings are involved in the relaxation mechanisms only if they belong to more complex chain-like structures of 10 to 100 tetrahedra.
△ Less
Submitted 9 June, 2017;
originally announced June 2017.
-
A new method of probing mechanical losses of coatings at cryogenic temperatures
Authors:
Serge Galliou,
Samuel Deléglise,
Maxim Goryachev,
Leonhard Neuhaus,
Gianpietro Cagnoli,
Salim Zerkani,
Vincent Dolique,
Xavier Vacheret,
Philippe Abbé,
Laurent Pinard,
Christophe Michel,
Thibaut Karassouloff,
Tristan Briant,
Pierre-François Cohadon,
Antoine Heidmann,
Michael E. Tobar,
Roger Bourquin
Abstract:
A new method of probing mechanical losses and comparing the corresponding deposition processes of metallic and dielectric coatings in 1-100 MHz frequency range and cryogenic temperatures is presented. The method is based on the use of extremely high-quality quartz acoustic cavities whose internal losses are orders of magnitude lower than any available coatings nowadays. The approach is demonstrate…
▽ More
A new method of probing mechanical losses and comparing the corresponding deposition processes of metallic and dielectric coatings in 1-100 MHz frequency range and cryogenic temperatures is presented. The method is based on the use of extremely high-quality quartz acoustic cavities whose internal losses are orders of magnitude lower than any available coatings nowadays. The approach is demonstrated for Chromium, Chromium/Gold and a multilayer tantala/silica coatings. The ${\rm Ta}_2{\rm O}_5/{\rm Si}{\rm O}_2$ coating has been found to exhibit a loss angle lower than $1.6\times10^{-5}$ near 30 {\rm MHz} at 4 {\rm K}. The results are compared to the previous measurements.
△ Less
Submitted 24 May, 2016;
originally announced May 2016.
-
2D photonic-crystal optomechanical nanoresonator
Authors:
K. Makles,
T. Antoni,
A. G. Kuhn,
S. Deléglise,
T. Briant,
P. F. Cohadon,
R. Braive,
G. Beaudoin,
L. Pinard,
C. Michel,
V. Dolique,
R. Flaminio,
G. Cagnoli,
I. Robert-Philip,
A. Heidmann
Abstract:
We present the optical optimization of an optomechanical device based on a suspended InP membrane patterned with a 2D near-wavelength grating (NWG) based on a 2D photonic-crystal geometry. We first identify by numerical simulation a set of geometrical parameters providing a reflectivity higher than 99.8 % over a 50-nm span. We then study the limitations induced by the finite value of the optical w…
▽ More
We present the optical optimization of an optomechanical device based on a suspended InP membrane patterned with a 2D near-wavelength grating (NWG) based on a 2D photonic-crystal geometry. We first identify by numerical simulation a set of geometrical parameters providing a reflectivity higher than 99.8 % over a 50-nm span. We then study the limitations induced by the finite value of the optical waist and lateral size of the NWG pattern using different numerical approaches. The NWG grating, pierced in a suspended InP 265 nm-thick membrane, is used to form a compact microcavity involving the suspended nano-membrane as end mirror. The resulting cavity has a waist size smaller than 10 $μ$m and a finesse in the 200 range. It is used to probe the Brownian motion of the mechanical modes of the nanomembrane.
△ Less
Submitted 23 October, 2014;
originally announced October 2014.
-
Measurements of mechanical thermal noise and energy dissipation in optical dielectric coatings
Authors:
Tianjun Li,
Felipe A. Aguilar Sandoval,
Mickael Geitner,
Gianpietro Cagnoli,
Vincent Dolique,
Jérôme Degallaix,
Raffaele Flaminio,
Danièle Forest,
Massimo Granata,
Christophe Michel,
Nazario Morgado,
Laurent Pinard,
Ludovic Bellon
Abstract:
In recent years an increasing number of devices and experiments are shown to be limited by mechanical thermal noise. In particular sub-Hertz laser frequency stabilization and gravitational wave detectors, that are able to measure fluctuations of 1E-18 m/rtHz or less, are being limited by thermal noise in the dielectric coatings deposited on mirrors. In this paper we present a new measurement of th…
▽ More
In recent years an increasing number of devices and experiments are shown to be limited by mechanical thermal noise. In particular sub-Hertz laser frequency stabilization and gravitational wave detectors, that are able to measure fluctuations of 1E-18 m/rtHz or less, are being limited by thermal noise in the dielectric coatings deposited on mirrors. In this paper we present a new measurement of thermal noise in low absorption dielectric coatings deposited on micro-cantilevers and we compare it with the results obtained from the mechanical loss measurements. The coating thermal noise is measured on the widest range of frequencies with the highest signal to noise ratio ever achieved. In addition we present a novel technique to deduce the coating mechanical losses from the measurement of the mechanical quality factor which does not rely on the knowledge of the coating and substrate Young moduli. The dielectric coatings are deposited by ion beam sputtering. The results presented here give a frequency independent loss angle of (4.70 $\pm$ 0.2)x1E-4 with a Young's modulus of 118 GPa for annealed tantala from 10 Hz to 20 kHz. For as-deposited silica, a weak frequency dependence (~ f^{-0.025}) is observed in this frequency range, with a Young's modulus of 70 GPa and an internal damping of (6.0 $\pm$ 0.3)x1E-4 at 16 kHz, but this value decreases by one order of magnitude after annealing and the frequency dependence disappears.
△ Less
Submitted 10 March, 2014; v1 submitted 31 December, 2013;
originally announced January 2014.