-
Long-Range Nanoelectromechanical Coupling at the LaAlO$_3$/SrTiO$_3$ Interface
Authors:
Aditi Nethwewala,
Kitae Eom,
Muqing Yu,
Ranjani Ramachandran,
Chang-Beom Eom,
Patrick Irvin,
Jeremy Levy
Abstract:
The LaAlO$_3$/SrTiO$_3$ interface hosts a plethora of gate-tunable electronic phases. Gating of LaAlO$_3$/SrTiO$_3$ interfaces are usually assumed to occur electrostatically. However, increasing evidence suggests that non-local interactions can influence and, in some cases, dominate the coupling between applied gate voltages and electronic properties. Here, we sketch quasi-1D ballistic electron wa…
▽ More
The LaAlO$_3$/SrTiO$_3$ interface hosts a plethora of gate-tunable electronic phases. Gating of LaAlO$_3$/SrTiO$_3$ interfaces are usually assumed to occur electrostatically. However, increasing evidence suggests that non-local interactions can influence and, in some cases, dominate the coupling between applied gate voltages and electronic properties. Here, we sketch quasi-1D ballistic electron waveguides at the LaAlO$_3$/SrTiO$_3$ interface as a probe to understand how gate tunability varies as a function of spatial separation. Gate tunability measurements reveal the scaling law to be at odds with the pure electrostatic coupling observed in traditional semiconductor systems. The non-Coulombic gating at the interface is attributed to the existence of a long-range nanoelectromechanical coupling between the gate and electron waveguide, mediated by the ferroelastic domains in SrTiO$_3$. The long-range interactions at the LaAlO$_3$/SrTiO$_3$ interface add unexpected richness and complexity to this correlated electron system.
△ Less
Submitted 31 March, 2024;
originally announced April 2024.
-
Electronic-grade epitaxial (111) KTaO3 heterostructures
Authors:
Jieun Kim,
Muqing Yu,
Jung-Woo Lee,
Shun-Li Shang,
Gi-Yeop Kim,
Pratap Pal,
Jinsol Seo,
Neil Campbell,
Kitae Eom,
Ranjani Ramachandran,
Mark S. Rzchowski,
Sang Ho Oh,
Si-Young Choi,
Zi-Kui Liu,
Jeremy Levy,
Chang-Beom Eom
Abstract:
KTaO3 has recently attracted attention as a model system to study the interplay of quantum paraelectricity, spin-orbit coupling, and superconductivity. However, the high and low vapor pressures of potassium and tantalum present processing challenges to creating interfaces clean enough to reveal the intrinsic quantum properties. Here, we report superconducting heterostructures based on electronic-g…
▽ More
KTaO3 has recently attracted attention as a model system to study the interplay of quantum paraelectricity, spin-orbit coupling, and superconductivity. However, the high and low vapor pressures of potassium and tantalum present processing challenges to creating interfaces clean enough to reveal the intrinsic quantum properties. Here, we report superconducting heterostructures based on electronic-grade epitaxial (111) KTaO3 thin films. Electrical and structural characterizations reveal that two-dimensional electron gas at the heterointerface between amorphous LaAlO3 and KTaO3 thin film exhibits significantly higher electron mobility, superconducting transition temperature and critical current density than those in bulk single crystal KTaO3-based heterostructures owing to cleaner interface in KTaO3 thin films. Our hybrid approach may enable epitaxial growth of other alkali metal-based oxides that lie beyond the capabilities of conventional methods.
△ Less
Submitted 25 August, 2023;
originally announced August 2023.
-
Surface acoustic wave generation and detection in quantum paraelectric regime of SrTiO$_3$-based heterostructure
Authors:
Dengyu Yang,
Muqing Yu,
Yun-Yi Pai,
Patrick Irvin,
Hyungwoo Lee,
Kitae Eom,
Chang-Beom Eom,
Jeremy Levy
Abstract:
Strontium titanate (STO), apart from being a ubiquitous substrate for complex-oxide heterostructures, possesses a multitude of strongly-coupled electronic and mechanical properties. Surface acoustic wave (SAW) generation and detection offers insight into electromechanical couplings that are sensitive to quantum paraelectricity and other structural phase transitions. Propagating SAWs can interact w…
▽ More
Strontium titanate (STO), apart from being a ubiquitous substrate for complex-oxide heterostructures, possesses a multitude of strongly-coupled electronic and mechanical properties. Surface acoustic wave (SAW) generation and detection offers insight into electromechanical couplings that are sensitive to quantum paraelectricity and other structural phase transitions. Propagating SAWs can interact with STO-based electronic nanostructures, in particular LaAlO$_3$/SrTiO$_3$ (LAO/STO). Here we report generation and detection of SAW within LAO/STO heterointerfaces at cryogenic temperatures ($T\ge$~2 K) using superconducting interdigitated transducers (IDTs). The temperature dependence shows an increase in the SAWs quality factor that saturates at $T\approx 8 $ K. The effect of backgate tuning on the SAW resonance frequency shows the possible acoustic coupling with the ferroelastic domain wall evolution. This method of generating SAWs provides a pathway towards dynamic tuning of ferroelastic domain structures, which are expected to influence electronic properties of complex-oxide nanostructures. Devices which incorporate SAWs may in turn help to elucidate the role of ferroelastic domain structures in mediating electronic behavior.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Electron Pairing and Nematicity in LaAlO$_3$/SrTiO$_3$ Nanostructures
Authors:
Aditi Nethwewala,
Hyungwoo Lee,
Jianan Li,
Megan Briggeman,
Yun-Yi Pai,
Kitae Eom,
Chang-Beom Eom,
Patrick Irvin,
Jeremy Levy
Abstract:
Strongly correlated electronic systems exhibit a wealth of unconventional behavior stemming from strong electron-electron interactions. The LaAlO$_3$/SrTiO$_3$ (LAO/STO) heterostructure supports rich and varied low-temperature transport characteristics including low-density superconductivity, and electron pairing without superconductivity for which the microscopic origins is still not understood.…
▽ More
Strongly correlated electronic systems exhibit a wealth of unconventional behavior stemming from strong electron-electron interactions. The LaAlO$_3$/SrTiO$_3$ (LAO/STO) heterostructure supports rich and varied low-temperature transport characteristics including low-density superconductivity, and electron pairing without superconductivity for which the microscopic origins is still not understood. LAO/STO also exhibits inexplicable signatures of electronic nematicity via nonlinear and anomalous Hall effects. Nanoscale control over the conductivity of the LAO/STO interface enables mesoscopic experiments that can probe these effects and address their microscopic origins. Here we report a direct correlation between electron pairing without superconductivity, anomalous Hall effect and electronic nematicity in quasi-1D ballistic nanoscale LAO/STO Hall crosses. The characteristic magnetic field at which the Hall coefficient changes directly coincides with the depairing of non-superconducting pairs showing a strong correlation between the two distinct phenomena. Angle-dependent Hall measurements further reveal an onset of electronic nematicity that again coincides with the electron pairing transition, unveiling a rotational symmetry breaking due to the transition from paired to unpaired phases at the interface. The results presented here highlights the influence of preformed electron pairs on the transport properties of LAO/STO and provide evidence of the elusive pairing ''glue'' that gives rise to electron pairing in SrTiO$_3$-based systems.
△ Less
Submitted 22 December, 2022;
originally announced December 2022.
-
Quantum Coherence Tomography of Lightwave Controlled Superconductivity
Authors:
L. Luo,
M. Mootz,
J. H. Kang,
C. Huang,
K. Eom,
J. W. Lee,
C. Vaswani,
Y. G. Collantes,
E. E. Hellstrom,
I. E. Perakis,
C. B. Eom,
J. Wang
Abstract:
Lightwave periodic driving of nearly dissipation-less currents has recently emerged as a universal control concept for both superconducting (SC) and topological electronics applications. While exciting progress has been made towards THz-driven superconductivity, our understanding of the interactions able to drive non-equilibrium pairing is still limited, partially due to the lack of direct measure…
▽ More
Lightwave periodic driving of nearly dissipation-less currents has recently emerged as a universal control concept for both superconducting (SC) and topological electronics applications. While exciting progress has been made towards THz-driven superconductivity, our understanding of the interactions able to drive non-equilibrium pairing is still limited, partially due to the lack of direct measurements of high-order correlation functions. Such measurements would exceed conventional single-particle spectroscopies and perturbative responses to fully characterize quantum states far-from-equilibrium. Particularly, sensing of the exotic collective modes that would uniquely characterize lightwave-driven SC coherence, in a way analogous to the Meissner effect, is very challenging but much needed. Here we report the discovery of lightwave-controlled superconductivity via parametric time-periodic driving of the strongly-coupled bands in iron-based superconductors by a unique phase-amplitude collective mode assisted by broken-symmetry THz supercurrents. We are able to measure non-perturbative, high-order correlations in this strongly-driven superconductivity by separating the THz multi-dimensional coherent spectra into conventional pump-probe, Higgs collective mode, and pronounced bi--Higgs frequency sideband peaks with highly nonlinear field dependence. We attribute the drastic transition in the coherent spectra to parametric excitation of time-dependent pseudo--spin canting states modulated by a phase-amplitude collective mode that manifests as a strongly nonlinear shift from $ω_\mathrm{Higgs}$ to 2$ω_\mathrm{Higgs}$. Remarkably, the latter higher--order sidebands dominate over the lower-order pump-probe and Higgs mode peaks above critical field, which indicates the breakdown of the susceptibility perturbative expansion in the parametrically-driven SC state.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
Low-Voltage Magnetoelectric Coupling in Membrane Heterostructures
Authors:
S. Lindemann,
J. Irwin,
G. -Y. Kim,
B. Wang,
K. Eom,
J. J. Wang,
J. M. Hu,
L. Q. Chen,
S. Y. Choi,
C. B. Eom,
M. S. Rzchowski
Abstract:
Strain-mediated magnetoelectric (ME) coupling in ferroelectric (FE) / ferromagnetic (FM) heterostructures offers a unique opportunity for both fundamental scientific research and low power multifunctional devices. Relaxor-ferroelectrics, like (1-x)Pb(Mg1/3Nb2/3)O3-(x)PbTiO3 (PMN-xPT), are ideal FE layer candidates due to their giant piezoelectricity. But thin films of PMN-PT suffer from substrate…
▽ More
Strain-mediated magnetoelectric (ME) coupling in ferroelectric (FE) / ferromagnetic (FM) heterostructures offers a unique opportunity for both fundamental scientific research and low power multifunctional devices. Relaxor-ferroelectrics, like (1-x)Pb(Mg1/3Nb2/3)O3-(x)PbTiO3 (PMN-xPT), are ideal FE layer candidates due to their giant piezoelectricity. But thin films of PMN-PT suffer from substrate clamping which substantially reduces piezoelectric in-plane strains. Here we present the first demonstration of low voltage ME coupling in an all-thin-film heterostructure which utilizes the anisotropic strains induced by the (011) orientation of PMN-PT. We completely remove PMN-PT films from their substrate and couple with FM Ni overlayers to create membrane PMN-PT/Ni heterostructures showing 90 degree Ni magnetization rotation with 3V PMN-PT bias, much less than the bulk PMNPT ~100V requirement. Scanning transmission electron microscopy and phase-field simulations clarify the membrane response. These results provide a crucial step towards understanding the microstructural behavior of PMN-PT thin films for use in piezo-driven magnetoelectric heterostructures.
△ Less
Submitted 11 October, 2021;
originally announced October 2021.
-
Oxide two-dimensional electron gas with high mobility at room-temperature
Authors:
Kitae Eom,
Hanjong Paik,
Jinsol Seo,
Neil Campbell,
Evgeny Y. Tsymbal,
Sang Ho Oh,
Mark Rzchowski,
Darrell G. Schlom,
Chang-beom Eom
Abstract:
The prospect of 2-dimensional electron gases (2DEGs) possessing high mobility at room temperature in wide-bandgap perovskite stannates is enticing for oxide electronics, particularly to realize transparent and high-electron mobility transistors. Nonetheless only a small number of studies to date report 2DEGs in BaSnO3-based heterostructures. Here, we report 2DEG formation at the LaScO3/BaSnO3 (LSO…
▽ More
The prospect of 2-dimensional electron gases (2DEGs) possessing high mobility at room temperature in wide-bandgap perovskite stannates is enticing for oxide electronics, particularly to realize transparent and high-electron mobility transistors. Nonetheless only a small number of studies to date report 2DEGs in BaSnO3-based heterostructures. Here, we report 2DEG formation at the LaScO3/BaSnO3 (LSO/BSO) interface with a room-temperature mobility of 60 cm2/V s at a carrier concentration of 1.7x1013 cm-2. This is an order of magnitude higher mobility at room temperature than achieved in SrTiO3-based 2DEGs. We achieved this by combining a thick BSO buffer layer with an ex-situ high-temperature treatment, which not only reduces the dislocation density but also produces a SnO2-terminated atomically flat surface, followed by the growth of an overlying BSO/LSO interface. Using weak-beam dark field imaging and in-line electron holography technique, we reveal a reduction of the threading dislocation density, and provide direct evidence for the spatial confinement of a 2DEG at the BSO/LSO interface. Our work opens a new pathway to explore the exciting physics of stannate-based 2DEGs at application-relevant temperatures for oxide nanoelectronics.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
In-plane quasi-single-domain BaTiO$_3$ via interfacial symmetry engineering
Authors:
J. W. Lee,
K. Eom,
T. R. Paudel,
B. Wang,
H. Lu,
H. Huyan,
S. Lindemann,
S. Ryu,
H. Lee,
T. H. Kim,
Y. Yuan,
J. A. Zorn,
S. Lei,
W. Gao,
T. Tybell,
V. Gopalan,
X. Pan,
A. Gruverman,
L. Q. Chen,
E. Y. Tsymbal,
C. B. Eom
Abstract:
The control of the in-plane domain evolution in ferroelectric thin films is not only critical to understanding ferroelectric phenomena but also to enabling functional device fabrication. However, in-plane polarized ferroelectric thin films typically exhibit complicated multi-domain states, not desirable for optoelectronic device performance. Here we report a strategy combining interfacial symmetry…
▽ More
The control of the in-plane domain evolution in ferroelectric thin films is not only critical to understanding ferroelectric phenomena but also to enabling functional device fabrication. However, in-plane polarized ferroelectric thin films typically exhibit complicated multi-domain states, not desirable for optoelectronic device performance. Here we report a strategy combining interfacial symmetry engineering and anisotropic strain to design single-domain, in-plane polarized ferroelectric BaTiO$_3$ thin films. Theoretical calculations predict the key role of the BaTiO$_3$ / PrScO$_3$ (110)$_O$ substrate interfacial environment, where anisotropic strain, monoclinic distortions, and interfacial electrostatic potential stabilize a single-variant spontaneous polarization. A combination of scanning transmission electron microscopy, piezoresponse force microscopy, ferroelectric hysteresis loop measurements, and second harmonic generation measurements directly reveals the stabilization of the in-plane quasi-single-domain polarization state. This work offers design principles for engineering in-plane domains of ferroelectric oxide thin films, which is a prerequisite for high performance optoelectronic devices.
△ Less
Submitted 16 September, 2021;
originally announced September 2021.
-
Gate-Tunable Optical Extinction of Graphene Nanoribbon Nanoclusters
Authors:
Erin Sheridan,
Gang Li,
Mamun Sarker,
Shan Hao,
Ki-Tae Eom,
Chang-Beom Eom,
Alexander Sinitskii,
Patrick Irvin,
Jeremy Levy
Abstract:
We investigate the optical response of graphene nanoribbons (GNRs) using the broadband nonlinear generation and detection capabilities of nanoscale junctions created at the LaAlO$_3$/SrTiO$_3$ interface. GNR nanoclusters measured to be as small as 1-2 GNRs in size are deposited on the LaAlO$_3$ surface with an atomic force microscope tip. Time-resolved nonlinear optical probes of GNR nanoclusters…
▽ More
We investigate the optical response of graphene nanoribbons (GNRs) using the broadband nonlinear generation and detection capabilities of nanoscale junctions created at the LaAlO$_3$/SrTiO$_3$ interface. GNR nanoclusters measured to be as small as 1-2 GNRs in size are deposited on the LaAlO$_3$ surface with an atomic force microscope tip. Time-resolved nonlinear optical probes of GNR nanoclusters reveal a strong, gate-tunable second and third harmonic response, as well as strong extinction of visible to near-infrared (VIS-NIR) light at distinct wavelengths, similar to previous reports with graphene.
△ Less
Submitted 12 March, 2021;
originally announced March 2021.
-
Nanoscale control of LaAlO3/SrTiO3 metal-insulator transition using ultra-low-voltage electron-beam lithography
Authors:
Dengyu Yang,
Shan Hao,
Jun Chen,
Qing Guo,
Muqing Yu,
Yang Hu,
KiTae Eom,
Jung-Woo Lee,
Chang-Beom Eom,
Patrick Irvin,
Jeremy Levy
Abstract:
We describe a method to control the insulator-metal transition at the LaAlO3/SrTiO3 interface using ultra-low-voltage electron beam lithography (ULV-EBL). Compared with previous reports that utilize conductive atomic-force-microscope lithography (c-AFM), this approach can provide comparable resolution (~10 nm) at write speeds (10 mm/s) that are up to 10,000x faster than c-AFM. The writing techniqu…
▽ More
We describe a method to control the insulator-metal transition at the LaAlO3/SrTiO3 interface using ultra-low-voltage electron beam lithography (ULV-EBL). Compared with previous reports that utilize conductive atomic-force-microscope lithography (c-AFM), this approach can provide comparable resolution (~10 nm) at write speeds (10 mm/s) that are up to 10,000x faster than c-AFM. The writing technique is non-destructive and the conductive state is reversible via prolonged exposure to air. Transport properties of representative devices are measured at milli-Kelvin temperatures, where superconducting behavior is observed. We also demonstrate the ability to create conducting devices on graphene/LaAlO3/SrTiO3 heterostructures. The underlying mechanism is believed to be closely related to the same mechanism regulating c-AFM-based methods.
△ Less
Submitted 29 August, 2020;
originally announced August 2020.
-
Engineered spin-orbit interactions in LaAlO$_3$/SrTiO$_3$-based 1D serpentine electron waveguides
Authors:
Megan Briggeman,
Jianan Li,
Mengchen Huang,
Hyungwoo Lee,
Jung-Woo Lee,
Kitae Eom,
Chang-Beom Eom,
Patrick Irvin,
Jeremy Levy
Abstract:
The quest to understand, design, and synthesize new forms of quantum matter guides much of contemporary research in condensed matter physics. One-dimensional (1D) electronic systems form the basis for some of the most interesting and exotic phases of quantum matter. The variety of experimentally-accessible ballistic 1D electronic systems is highly restricted, and furthermore these systems typicall…
▽ More
The quest to understand, design, and synthesize new forms of quantum matter guides much of contemporary research in condensed matter physics. One-dimensional (1D) electronic systems form the basis for some of the most interesting and exotic phases of quantum matter. The variety of experimentally-accessible ballistic 1D electronic systems is highly restricted, and furthermore these systems typically have few tuning parameters other than electric and magnetic fields. However, electron waveguides formed from two-dimensional (2D) LaAlO$_3$/SrTiO$_3$ heterointerfaces exhibit remarkable 1D properties, including ballistic multi-mode transport and strong attractive electron-electron interaction, but these systems conspicuously lack strong or tunable spin-orbit interactions. Here we describe a new class of quasi-1D nanostructures, based on LaAlO$_3$/SrTiO$_3$ electron waveguides, in which a sinusoidal transverse spatial modulation is imposed. Nanowires created with this "serpentine" modulation display unique dispersive features in the subband spectra, namely (1) a significant shift ($\sim$ 7 tesla) in the spin-dependent subband minima, and (2) fractional conductance plateaus, some of which are continuously tunable with a magnetic field. The first property can be understood as an engineered spin-orbit interaction associated with the periodic acceleration of electrons as they undulate through the nanowire (ballistically), while the second property signifies the presence of enhanced electron-electron scattering in this system due to the imposed periodic structure. The ability to engineer these interactions in quantum wires contributes to the tool set of a 1D solid-state quantum simulation platform.
△ Less
Submitted 15 December, 2019;
originally announced December 2019.
-
One-dimensional Kronig-Penney superlattices at the LaAlO$_3$/SrTiO$_3$ interface
Authors:
Megan Briggeman,
Hyungwoo Lee,
Jung-Woo Lee,
Kitae Eom,
François Damanet,
Elliott Mansfield,
Jianan Li,
Mengchen Huang,
Andrew J. Daley,
Chang-Beom Eom,
Patrick Irvin,
Jeremy Levy
Abstract:
The paradigm of electrons interacting with a periodic lattice potential is central to solid-state physics. Semiconductor heterostructures and ultracold neutral atomic lattices capture many of the essential properties of 1D electronic systems. However, fully one-dimensional superlattices are highly challenging to fabricate in the solid state due to the inherently small length scales involved. Condu…
▽ More
The paradigm of electrons interacting with a periodic lattice potential is central to solid-state physics. Semiconductor heterostructures and ultracold neutral atomic lattices capture many of the essential properties of 1D electronic systems. However, fully one-dimensional superlattices are highly challenging to fabricate in the solid state due to the inherently small length scales involved. Conductive atomic-force microscope (c-AFM) lithography has recently been demonstrated to create ballistic few-mode electron waveguides with highly quantized conductance and strongly attractive electron-electron interactions. Here we show that artificial Kronig-Penney-like superlattice potentials can be imposed on such waveguides, introducing a new superlattice spacing that can be made comparable to the mean separation between electrons. The imposed superlattice potential "fractures" the electronic subbands into a manifold of new subbands with magnetically-tunable fractional conductance (in units of $e^2/h$). The lowest $G=2e^2/h$ plateau, associated with ballistic transport of spin-singlet electron pairs, is stable against de-pairing up to the highest magnetic fields explored ($|B|=16$ T). A 1D model of the system suggests that an engineered spin-orbit interaction in the superlattice contributes to the enhanced pairing observed in the devices. These findings represent an important advance in the ability to design new families of quantum materials with emergent properties, and mark a milestone in the development of a solid-state 1D quantum simulation platform.
△ Less
Submitted 15 December, 2019;
originally announced December 2019.
-
Gate-Tunable Optical Nonlinearities and Extinction in Graphene/LaAlO$_3$/SrTiO$_3$ Nanostructures
Authors:
Erin Sheridan,
Lu Chen,
Jianan Li,
Qing Guo,
Ki-Tae Eom,
Hyungwoo Lee,
Jung-Woo Lee,
Chang-Beom Eom,
Patrick Irvin,
Jeremy Levy
Abstract:
Pristine, undoped graphene has a constant absorption of 2.3 % across the visible to near-infrared (VIS-NIR) region of the electromagnetic spectrum. Under certain conditions, such as nanostructuring and intense gating, graphene can interact more robustly with VIS-NIR light and exhibit a large nonlinear optical response. Here, we explore the optical properties of graphene/LaAlO$_3$/SrTiO$_3$ nanostr…
▽ More
Pristine, undoped graphene has a constant absorption of 2.3 % across the visible to near-infrared (VIS-NIR) region of the electromagnetic spectrum. Under certain conditions, such as nanostructuring and intense gating, graphene can interact more robustly with VIS-NIR light and exhibit a large nonlinear optical response. Here, we explore the optical properties of graphene/LaAlO$_3$/SrTiO$_3$ nanostructures, where nanojunctions formed at the LaAlO$_3$/SrTiO$_3$ interface enable large (~10$^8$ V/m) electric fields to be applied to graphene over a scale of ~10 nm. Upon illumination with ultrafast VIS-NIR light, graphene/LaAlO$_3$/SrTiO$_3$ nanostructures produce broadband THz emission as well as a sum-frequency generated (SFG) response. Strong spectrally sharp, gate-tunable extinction features (>99.99%) are observed in both the VIS-NIR and SFG regions alongside significant intensification of the nonlinear response. The observed gate-tunable strong graphene-light interaction and nonlinear optical response are of fundamental interest and open the way for future exploitation in graphene-based optical devices.
△ Less
Submitted 14 December, 2019;
originally announced December 2019.
-
Finite Size Effect on Nanomechanical Mass Detection: Role of Surface Elasticity
Authors:
Mai Duc Dai,
Chang-Wan Kim,
Kilho Eom
Abstract:
Nanomechanical resonators have recently been highlighted because of their remarkable ability to perform the sensing and detection. Since the nanomechanical resonators are characterized by large surface-to-volume ratio, it is implied that the surface effect plays a substantial role on not only the resonance but also the sensing performance of nanomechanical resonators. In this work, we have studied…
▽ More
Nanomechanical resonators have recently been highlighted because of their remarkable ability to perform the sensing and detection. Since the nanomechanical resonators are characterized by large surface-to-volume ratio, it is implied that the surface effect plays a substantial role on not only the resonance but also the sensing performance of nanomechanical resonators. In this work, we have studied the role of surface effect on the detection sensitivity of a nanoresonator that undergoes either harmonic vibration or nonlinear oscillation based on the continuum elastic model such as beam model. It is shown that surface effect makes an impact on both harmonic resonance and nonlinear oscillations, and that the sensing performance is dependent on the surface effect. Moreover, we have also investigated the surface effect on the mechanical tuning of resonance and sensing performance. It is interestingly found that the mechanical tuning of resonance is independent of surface effect, and that the mechanical tuning of sensing performance is determined by surface effect. Our study sheds light on the importance of surface effect on the sensing performance of nanoresonators.
△ Less
Submitted 9 May, 2011;
originally announced May 2011.
-
Nanomechanical Resonators and Their Applications in Biological/Chemical Detection: Nanomechanics Principles
Authors:
Kilho Eom,
Harold S. Park,
Dae Sung Yoon,
Taeyun Kwon
Abstract:
Recent advances in nanotechnology have led to the development of nano-electro-mechanical systems (NEMS) such as nanomechanical resonators, which have recently received significant attention from the scientific community. This has not only been for their capability for the label-free detection of bio/chemical-molecules at single-molecule (or atomic) resolution for future applications such as the ea…
▽ More
Recent advances in nanotechnology have led to the development of nano-electro-mechanical systems (NEMS) such as nanomechanical resonators, which have recently received significant attention from the scientific community. This has not only been for their capability for the label-free detection of bio/chemical-molecules at single-molecule (or atomic) resolution for future applications such as the early diagnostics of diseases such as cancer, but also for their unprecedented ability to detect physical quantities such as molecular weight, elastic stiffness, surface stress, and surface elastic stiffness for adsorbed molecules on the surface. Most experimental works on resonator-based molecular detection have been based on the principle that molecular adsorption onto a resonator surface increases the effective mass, and consequently decreases the resonant frequencies of the nanomechanical resonator. However, this principle is insufficient to provide fundamental insights into resonator-based molecular detection at the nanoscale; this is due to recently proposed novel nanoscale detection principles including various effects such as surface effects, nonlinear oscillations, coupled resonance, and stiffness effects. Therefore, our objective in this review is to overview the current attempts to understand the underlying mechanisms in nanoresonator-based detection using physical models coupled to computational simulations and/or experiments. Specifically, we will focus on issues of special relevance to the dynamic behavior of nanoresonators and their applications in biological/chemical detection. We additionally provide extensive discussion regarding potentially fruitful future research directions coupling experiments and simulations in order to develop a fundamental understanding of the basic physical principles that govern NEMS and NEMS-based sensing applications.
△ Less
Submitted 9 May, 2011;
originally announced May 2011.
-
Dynamical Response of Nanomechanical Resonators to Biomolecular Interactions
Authors:
Kilho Eom,
Tae Yun Kwon,
Dae Sung Yoon,
Hong Lim Lee,
Tae Song Kim
Abstract:
We studied the dynamical response of a nanomechanical resonator to biomolecular (e.g. DNA) adsorptions on a resonator's surface by using a theoretical model, which considers the Hamiltonian H such that the potential energy consists of elastic bending energy of a resonator and the potential energy for biomolecular interactions. It was shown that the resonant frequency shift of a resonator due to…
▽ More
We studied the dynamical response of a nanomechanical resonator to biomolecular (e.g. DNA) adsorptions on a resonator's surface by using a theoretical model, which considers the Hamiltonian H such that the potential energy consists of elastic bending energy of a resonator and the potential energy for biomolecular interactions. It was shown that the resonant frequency shift of a resonator due to biomolecular adsorption depends on not only the mass of adsorbed biomolecules but also the biomolecular interactions. Specifically, for dsDNA adsorption on a resonator's surface, the resonant frequency shift is also dependent on the ionic strength of a solvent, implying the role of molecular interactions on the dynamic behavior of a resonator. This indicates that nanomechanical resonators may enable one to quantify the biomolecular mass, implying the enumeration of biomolecules, as well as gain insight into intermolecular interactions between adsorbed biomolecules on the surface.
△ Less
Submitted 17 August, 2007; v1 submitted 25 June, 2007;
originally announced June 2007.
-
Theoretical studies of the kinetics of mechanical unfolding of cross-linked polymer chains and their implications for single molecule pulling experiments
Authors:
Kilho Eom,
Dmitrii E Makarov,
Gregory J. Rodin
Abstract:
We have used kinetic Monte Carlo simulations to study the kinetics of unfolding of cross-linked polymer chains under mechanical loading. As the ends of a chain are pulled apart, the force transmitted by each crosslink increases until it ruptures. The stochastic crosslink rupture process is assumed to be governed by first order kinetics with a rate that depends exponentially on the transmitted fo…
▽ More
We have used kinetic Monte Carlo simulations to study the kinetics of unfolding of cross-linked polymer chains under mechanical loading. As the ends of a chain are pulled apart, the force transmitted by each crosslink increases until it ruptures. The stochastic crosslink rupture process is assumed to be governed by first order kinetics with a rate that depends exponentially on the transmitted force. We have performed random searches to identify optimal crosslink configurations whose unfolding requires a large applied force (measure of strength) and/or large dissipated energy (measure of toughness). We found that such optimal chains always involve cross-links arranged to form parallel strands. The location of those optimal strands generally depends on the loading rate. Optimal chains with a small number of cross-links were found to be almost as strong and tough as optimal chains with a large number of cross-links. Furthermore, optimality of chains with a small number of cross-links can be easily destroyed by adding cross-links at random. The present findings are relevant for the interpretation of single molecule force probe spectroscopy studies of the mechanical unfolding of load-bearing proteins, whose native topology often involves parallel strand arrangements similar to the optimal configurations identified in the study.
△ Less
Submitted 16 September, 2004;
originally announced September 2004.
