-
Observation of strain-rate softening behavior in jammed granular media
Authors:
Mingchao Liu,
Weining Mao,
Yiqiu Zhao,
Qin Xu,
Yixiang Gan,
Yifan Wang,
K Jimmy Hsia
Abstract:
The strain-rate sensitivity of confined granular materials has been widely explored, with most findings exhibiting rate-strengthening behaviors. This study, however, reveals a distinct rate-softening behavior across a certain strain rate range based on triaxial tests on particle clusters of various materials with different surface properties, particle sizes, shapes, and stiffness. This softening e…
▽ More
The strain-rate sensitivity of confined granular materials has been widely explored, with most findings exhibiting rate-strengthening behaviors. This study, however, reveals a distinct rate-softening behavior across a certain strain rate range based on triaxial tests on particle clusters of various materials with different surface properties, particle sizes, shapes, and stiffness. This softening effect is especially pronounced in the case of common rice particles. By examining the behavior of rice particles under different confining pressure and surface conditions, and directly measuring the frictional coefficient across various loading rates, we find that the reduction in surface frictional coefficient with the increasing strain rate predominantly contributes to this rate-softening behavior. This conclusion is validated by results from Finite Element Method (FEM) simulations. Additionally, we identify confining pressure as a critical factor regulating the normal stress between particles, and thereby enhancing frictional behavior. Rheometer tests reveal that the shear modulus exhibits a similar rate-softening trend. This study of rate-softening behavior in granular materials enhances our understanding of the mechanisms during their deformation under confining pressure. It also suggests that local inter-particle tribology significantly impacts overall granular behavior.
△ Less
Submitted 30 April, 2024;
originally announced April 2024.
-
Measurement of enhanced spin-orbit coupling strength for donor-bound electron spins in silicon
Authors:
Radha Krishnan,
Beng Yee Gan,
Yu-Ling Hsueh,
A. M. Saffat-Ee Huq,
Jonathan Kenny,
Rajib Rahman,
Teck Seng Koh,
Michelle Y. Simmons,
Bent Weber
Abstract:
While traditionally considered a deleterious effect in quantum dot spin qubits, the spin-orbit interaction is recently being revisited as it allows for rapid coherent control by on-chip AC electric fields. For electrons in bulk silicon, SOC is intrinsically weak, however, it can be enhanced at surfaces and interfaces, or through atomic placement. Here we show that the strength of the spin-orbit co…
▽ More
While traditionally considered a deleterious effect in quantum dot spin qubits, the spin-orbit interaction is recently being revisited as it allows for rapid coherent control by on-chip AC electric fields. For electrons in bulk silicon, SOC is intrinsically weak, however, it can be enhanced at surfaces and interfaces, or through atomic placement. Here we show that the strength of the spin-orbit coupling can be locally enhanced by more than two orders of magnitude in the manybody wave functions of multi-donor quantum dots compared to a single donor, reaching strengths so far only reported for holes or two-donor system with certain symmetry. Our findings may provide a pathway towards all-electrical control of donor-bound spins in silicon using electric dipole spin resonance (EDSR).
△ Less
Submitted 24 April, 2024;
originally announced April 2024.
-
Modified Steinberg-Guinan elasticity model to describe softening-hardening dual anomaly in vanadium
Authors:
Hao Wang,
Yuan-Chao Gan,
Xiang-Rong Chen,
Yi-Xian Wang,
Hua Y. Geng
Abstract:
Constitutive models are essential for describing the mechanical behavior of materials under high temperatures and pressures, among which the Steinberg-Guinan (SG) model is widely adopted. Recent work has discovered a peculiar dual anomaly of compression-induced softening and heating-induced hardening in the elasticity of compressed vanadium [Phys. Rev. B 104, 134102 (2021)], which is beyond the ca…
▽ More
Constitutive models are essential for describing the mechanical behavior of materials under high temperatures and pressures, among which the Steinberg-Guinan (SG) model is widely adopted. Recent work has discovered a peculiar dual anomaly of compression-induced softening and heating-induced hardening in the elasticity of compressed vanadium [Phys. Rev. B 104, 134102 (2021)], which is beyond the capability of the SG model to describe. In this work, a modified SG constitutive model is proposed to embody such an anomalous behavior. Elemental vanadium is considered as an example to demonstrate the effectiveness of this improved model in describing the dual anomalies of mechanical elasticity. This new variant of the SG model can also be applied to other materials that present an irregular variation in the mechanical elasticity, and is important to faithfully model and simulate the mechanical response of materials under extreme conditions.
△ Less
Submitted 17 March, 2024;
originally announced March 2024.
-
Prediction of novel ordered phases in U-X (X= Zr, Sc, Ti, V, Cr, Y, Nb, Mo, Hf, Ta, W) binary alloys under high pressure
Authors:
Xiao L. Pan,
Hong X. Song,
H. Wang,
F. C. Wu,
Y. C. Gan,
Xiang R. Chen,
Ying Chen,
Hua Y. Geng
Abstract:
U-based binary alloys have been widely adopted in fast nuclear reactors, but their stability under extreme conditions of high-pressure is almost unknown, mounting up to latent risk in applications. Here, possible ordered phases in U-Zr system up to 200 GPa are comprehensively investigated by unbiased first-principles structure prediction. Stable U2Zr, metastable U3Zr and U4Zr phases are discovered…
▽ More
U-based binary alloys have been widely adopted in fast nuclear reactors, but their stability under extreme conditions of high-pressure is almost unknown, mounting up to latent risk in applications. Here, possible ordered phases in U-Zr system up to 200 GPa are comprehensively investigated by unbiased first-principles structure prediction. Stable U2Zr, metastable U3Zr and U4Zr phases are discovered for the first time, which exhibit strong stability under compression. They all are metallic, with 5f electrons of uranium dominating the electronic density of states near the Fermi level. Prominent ionic interactions between U and Zr atoms, as well as covalent interactions between adjacent uranium atoms, are found. The same strategy is applied to explore the stability of ordered phases in other U-based binary transition metal alloys, U-X (X= Sc, Ti, V, Cr, Y, Nb, Mo, Hf, Ta, W). Stable and metastable ordered phases similar to U-Zr alloy are unveiled, all with similar electronic structures. For these alloys, we find that the structure of U2X (X=Zr, Ti, Hf) hosts a unique hybrid phase transition similar to U2Nb, which is a superposition of a first-order transition and a second-order transition. The prediction of these novel phases not only refutes the stability of the long-believed ordered phase I4/mmm-U2Mo, but also rewrites the phase diagrams of U-X (X= Zr, Sc, Ti, V, Cr, Nb, Mo, Hf, Ta) alloys under high pressure. All of these findings promote our understanding of the high-pressure behavior of the broad category of U-based binary alloys with transition metals.
△ Less
Submitted 24 February, 2024;
originally announced February 2024.
-
Electrical and thermal transport properties of kagome metals AV$_3$Sb$_5$ (A=K, Rb, Cs)
Authors:
Xinrun Mi,
Kunya Yang,
Yuhan Gan,
Long Zhang,
Aifeng Wang,
Yisheng Chai,
Xiaoyuan Zhou,
Mingquan He
Abstract:
The interplay between lattice geometry, band topology and electronic correlations in the newly discovered kagome compounds AV$_3$Sb$_5$ (A=K, Rb, Cs) makes this family a novel playground to investigate emergent quantum phenomena, such as unconventional superconductivity, chiral charge density wave and electronic nematicity. These exotic quantum phases naturally leave nontrivial fingerprints in tra…
▽ More
The interplay between lattice geometry, band topology and electronic correlations in the newly discovered kagome compounds AV$_3$Sb$_5$ (A=K, Rb, Cs) makes this family a novel playground to investigate emergent quantum phenomena, such as unconventional superconductivity, chiral charge density wave and electronic nematicity. These exotic quantum phases naturally leave nontrivial fingerprints in transport properties of AV$_3$Sb$_5$, both in electrical and thermal channels, which are prominent probes to uncover the underlying mechanisms. In this brief review, we highlight the unusual electrical and thermal transport properties observed in the unconventional charge ordered state of AV3Sb5, including giant anomalous Hall, anomalous Nernst, ambipolar Nernst and anomalous thermal Hall effects. Connections of these anomalous transport properties to time-reversal symmetry breaking, topological and multiband fermiology, as well as electronic nematicity, are also discussed. Finally, a perspective together with challenges of this rapid growing field are given.
△ Less
Submitted 31 December, 2023;
originally announced January 2024.
-
Partially Saturated Granular Flow in a Rotating Drum: The Role of Cohesion
Authors:
Mingrui Dong,
Zhongzheng Wang,
Benjy Marks,
Yu Chen,
Yixiang Gan
Abstract:
Partially saturated granular flows are common in various natural and industrial processes, such as landslides, mineral handling, and food processing. We conduct experiments and apply the Discrete Element Method (DEM) to study granular flows in rotating drums under partially saturated conditions. We focus on varying the strength of cohesion (surface tension) and rotation rate within the modes of ro…
▽ More
Partially saturated granular flows are common in various natural and industrial processes, such as landslides, mineral handling, and food processing. We conduct experiments and apply the Discrete Element Method (DEM) to study granular flows in rotating drums under partially saturated conditions. We focus on varying the strength of cohesion (surface tension) and rotation rate within the modes of rolling flow and cascading flow. With an increase in surface tension, a rolling mode can possess a steeper slope and correspondingly needs a higher rotation rate to transition to a cascading. The depth of the flowing region increases with increasing cohesion, while the sensitivity is reduced for cases of high cohesion. We propose a dimensionless number CE that captures the combined effects of rotation, gravity and cohesion on the dynamic angle of repose and flow depth. In addition, we extract statistical information on the formation of clusters within the flow. We find a power law relation between the cluster size distribution and its probability, which indicates that stronger cohesion can promote the formation of larger clusters, and we discuss how cohesion impact on flows manifested by cluster formation.
△ Less
Submitted 18 July, 2023;
originally announced July 2023.
-
Landscape approximation of low energy solutions to binary optimization problems
Authors:
Benjamin Y. L. Tan,
Beng Yee Gan,
Daniel Leykam,
Dimitris G. Angelakis
Abstract:
We show how the localization landscape, originally introduced to bound low energy eigenstates of disordered wave media and many-body quantum systems, can form the basis for hardware-efficient quantum algorithms for solving binary optimization problems. Many binary optimization problems can be cast as finding low-energy eigenstates of Ising Hamiltonians. First, we apply specific perturbations to th…
▽ More
We show how the localization landscape, originally introduced to bound low energy eigenstates of disordered wave media and many-body quantum systems, can form the basis for hardware-efficient quantum algorithms for solving binary optimization problems. Many binary optimization problems can be cast as finding low-energy eigenstates of Ising Hamiltonians. First, we apply specific perturbations to the Ising Hamiltonian such that the low energy modes are bounded by the localization landscape. Next, we demonstrate how a variational method can be used to prepare and sample from the peaks of the localization landscape. Numerical simulations of problems of up to $10$ binary variables show that the localization landscape-based sampling can outperform QAOA circuits of similar depth, as measured in terms of the probability of sampling the exact ground state.
△ Less
Submitted 5 July, 2023;
originally announced July 2023.
-
Coherent Optical Spin Hall Transport for Spin-optronics at Room Temperature
Authors:
Ying Shi,
Yusong Gan,
Yuzhong Chen,
Yubin Wang,
Sanjib Ghosh,
Alexey Kavokin,
Qihua Xiong
Abstract:
Spin or valley degrees of freedom in condensed matter have been proposed as efficient information carriers towards next generation spintronics. It is therefore crucial to develop effective strategies to generate and control spin or valley-locked spin currents, e.g., by exploiting the spin Hall or valley Hall effects. However, the scattering, and rapid dephasing of electrons pose major challenges t…
▽ More
Spin or valley degrees of freedom in condensed matter have been proposed as efficient information carriers towards next generation spintronics. It is therefore crucial to develop effective strategies to generate and control spin or valley-locked spin currents, e.g., by exploiting the spin Hall or valley Hall effects. However, the scattering, and rapid dephasing of electrons pose major challenges to achieve macroscopic coherent spin currents and realistic spintronic or valleytronic devices, specifically at room temperature, where strong thermal fluctuations could further obscure the spin flow. Exciton polaritons in semiconductor microcavities being the quantum superposition of excitons and photons, are believed to be promising platforms for spin-dependent optoelectronic or, in short, spin-optronic devices. Long-range spin current flows of exciton polaritons may be controlled through the optical spin Hall effect. However, this effect could neither be unequivocally observed at room temperature nor be exploited for realistic polariton spintronic devices due to the presence of strong thermal fluctuations or large linear spin splittings. Here, we report the observation of room temperature optical spin Hall effect of exciton polaritons with the spin current flow over a distance as large as 60 um in a hybrid organic-inorganic FAPbBr3 perovskite microcavity. We show direct evidence of the long-range coherence at room temperature in the flow of exciton polaritons, and the spin current carried by them. By harnessing the long-range spin-Hall transport of exciton polaritons, we have demonstrated two novel room temperature polaritonic devices, namely the NOT gate and the spin-polarized beam splitter, advancing the frontier of room-temperature polaritonics in perovskite microcavities.
△ Less
Submitted 25 April, 2023;
originally announced April 2023.
-
Electrical and thermal transport properties of kagome metals $A$Ti$_3$Bi$_5$ ($A$ = Rb, Cs)
Authors:
Xintong Chen,
Xiangqi Liu,
Wei Xia,
Xinrun Mi,
Luyao Zhong,
Kunya Yang,
Long Zhang,
Yuhan Gan,
Yan Liu,
Guiwen Wang,
Aifeng Wang,
Yisheng Chai,
Junying Shen,
Xiaolong Yang,
Yanfeng Guo,
Mingquan He
Abstract:
We report electrical and thermal transport properties of single crystalline kagome metals $A$Ti$_3$Bi$_5$ ($A$ = Rb, Cs). Different from the structural similar kagome superconductors $A$V$_3$Sb$_5$, no charge density wave instabilities are found in $A$Ti$_3$Bi$_5$. At low temperatures below 5 K, signatures of superconductivity appear in $A$Ti$_3$Bi$_5$ as seen in magnetization measurements. Howeve…
▽ More
We report electrical and thermal transport properties of single crystalline kagome metals $A$Ti$_3$Bi$_5$ ($A$ = Rb, Cs). Different from the structural similar kagome superconductors $A$V$_3$Sb$_5$, no charge density wave instabilities are found in $A$Ti$_3$Bi$_5$. At low temperatures below 5 K, signatures of superconductivity appear in $A$Ti$_3$Bi$_5$ as seen in magnetization measurements. However, bulk superconductivity is not evidenced by specific heat results. Similar to $A$V$_3$Sb$_5$, $A$Ti$_3$Bi$_5$ show nonlinear magnetic field dependence of the Hall effect below about 70 K, pointing to a multiband nature. Unlike $A$V$_3$Sb$_5$ in which phonons and electron-phonon coupling play important roles in thermal transport, the thermal conductivity in $A$Ti$_3$Bi$_5$ is dominated by electronic contributions. Moreover, our calculated electronic structure suggests that van Hove singularities are sitting well above the Fermi energy. Compared with $A$V$_3$Sb$_5$, the absence of charge orders in $A$Ti$_3$Bi$_5$ is closely associated with minor contributions from electron-phonon coupling and/or van Hove singularities.
△ Less
Submitted 26 April, 2023; v1 submitted 7 March, 2023;
originally announced March 2023.
-
Gate-tuned ambipolar superconductivity with strong pairing interaction in intrinsic gapped monolayer 1T'-MoTe2
Authors:
Fangdong Tang,
Peipei Wang,
Yuan Gan,
Jian lyu,
Qixing Wang,
Xinrun Mi,
Mingquan He,
Liyuan Zhang,
Jurgen H. Smet
Abstract:
Gate tunable two-dimensional (2D) superconductors offer significant advantages when studying superconducting phase transitions. Here, we address superconductivity in exfoliated 1T'-MoTe2 monolayers with an intrinsic band gap of ~7.3 meV using electrostatic doping. Despite large differences in the dispersion of the conduction and the valence bands, superconductivity can be achieved easily for both…
▽ More
Gate tunable two-dimensional (2D) superconductors offer significant advantages when studying superconducting phase transitions. Here, we address superconductivity in exfoliated 1T'-MoTe2 monolayers with an intrinsic band gap of ~7.3 meV using electrostatic doping. Despite large differences in the dispersion of the conduction and the valence bands, superconductivity can be achieved easily for both electrons and holes. The onset of superconductivity occurs near 7-8K for both charge carrier types. This temperature is much higher than in bulk samples. Also the in-plane upper critical field is strongly enhanced and exceeds the BCS Pauli limit in both cases. Gap information is extracted using point-contact spectroscopy. The gap ratio exceeds multiple times the value expected for BCS weak-coupling. All these observations suggest a strong enhancement of the pairing interaction.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
Charge fluctuations above $T_\mathrm{CDW}$ revealed by glasslike thermal transport in kagome metals $A$V$_3$Sb$_5$ ($A$ = K, Rb, Cs)
Authors:
Kunya Yang,
Wei Xia,
Xinrun Mi,
Long Zhang,
Yuhan Gan,
Aifeng Wang,
Yisheng Chai,
Xiaoyuan Zhou,
Xiaolong Yang,
Yanfeng Guo,
Mingquan He
Abstract:
We present heat capacity, electrical and thermal transport measurements of kagome metals $A$V$_3$Sb$_5$ ($A$ = K, Rb, Cs). In all three compounds, development of short-range charge fluctuations above the charge density wave (CDW) transition temperature $T_\mathrm{CDW}$ strongly scatters phonons via electron-phonon coupling, leading to glasslike phonon heat transport, i.e., phonon thermal conductiv…
▽ More
We present heat capacity, electrical and thermal transport measurements of kagome metals $A$V$_3$Sb$_5$ ($A$ = K, Rb, Cs). In all three compounds, development of short-range charge fluctuations above the charge density wave (CDW) transition temperature $T_\mathrm{CDW}$ strongly scatters phonons via electron-phonon coupling, leading to glasslike phonon heat transport, i.e., phonon thermal conductivity decreases weakly upon cooling. Once the long-range charge order sets in below $T_\mathrm{CDW}$, short-range charge fluctuations are quenched, and the typical Umklapp scattering dominated phonon heat transport is recovered. The charge-fluctuations-induced glasslike phonon thermal conductivity implies sizable electron-phonon coupling in $A$V$_3$Sb$_5$.
△ Less
Submitted 28 April, 2023; v1 submitted 8 November, 2022;
originally announced November 2022.
-
MyElas: An automatized tool-kit for high-throughput calculation, post-processing and visualization of elasticity and related properties of solids
Authors:
Hao Wang,
Y. C. Gan,
Hua Y. Geng,
Xiang-Rong Chen
Abstract:
Elasticity is one of the most fundamental mechanical properties of solid. In high-throughput design of advanced materials, there is an imperative demand for the capability to quickly calculate and screen a massive pool of candidate structures. A fully automatized pipeline with minimal human intervention is the key to provide high efficiency to achieve the goal. Here, we introduce a tool-kit MyElas…
▽ More
Elasticity is one of the most fundamental mechanical properties of solid. In high-throughput design of advanced materials, there is an imperative demand for the capability to quickly calculate and screen a massive pool of candidate structures. A fully automatized pipeline with minimal human intervention is the key to provide high efficiency to achieve the goal. Here, we introduce a tool-kit MyElas that aims to address this problem by forging all pre-processing, elastic constant and other related property calculations, and post-processing into an integrated framework that automatically performs the assigned tasks to drive data flowing through parallelized pipelines from input to output. The core of MyElas is to calculate the second and third order elastic constants of a solid with the energy-strain method from first-principles. MyElas can auto-analyze the elastic constants, to derive other related physical quantities. Furthermore, the tool-kit also integrates a visualization function, which can, for example, plot the spatial anisotropy of elastic modulus and sound velocity of monocrystalline. The validity and efficiency of the toolkit are tested and bench-marked on several typical systems.
△ Less
Submitted 4 October, 2022;
originally announced October 2022.
-
Multiband effects in thermoelectric and electrical transport properties of kagome superconductors $A$V$_3$Sb$_5$ ($A$ = K, Rb, Cs)
Authors:
Xinrun Mi,
Wei Xia,
Long Zhang,
Yuhan Gan,
Kunya Yang,
Aifeng Wang,
Yisheng Chai,
Yanfeng Guo,
Xiaoyuan Zhou,
Mingquan He
Abstract:
We studied the effects of multiband electronic structure on the thermoelectric and electrical transport properties in the normal state of kagome superconductors $A$V$_3$Sb$_5$ ($A$ = K, Rb, Cs). In all three members, the multiband nature is manifested by sign changes in the temperature dependence of the Seebeck and Hall resistivity, together with sublinear response of the isothermal Nernst and Hal…
▽ More
We studied the effects of multiband electronic structure on the thermoelectric and electrical transport properties in the normal state of kagome superconductors $A$V$_3$Sb$_5$ ($A$ = K, Rb, Cs). In all three members, the multiband nature is manifested by sign changes in the temperature dependence of the Seebeck and Hall resistivity, together with sublinear response of the isothermal Nernst and Hall effects to external magnetic fields in the charge ordered state. Moreover, ambipolar transport effects appear ubiquitously in all three systems, giving rise to sizable Nernst signal. Finally, possible origins of the sign reversal in the temperature dependence of the Hall effect are discussed.
△ Less
Submitted 2 September, 2022;
originally announced September 2022.
-
Contact behaviour of simulated rough spheres generated with spherical harmonics
Authors:
Deheng Wei,
Chongpu Zhai,
Dorian A. H. Hanaor,
Yixiang Gan
Abstract:
Normal contact behaviour between non adhesive fractal rough particles is studied using a finite element method (FEM). A series of spherical grain surfaces with distinguished roughness features are generated by means of Spherical Harmonics. These surfaces are described by two roughness descriptors, namely, relative roughness (Rr) and fractal dimension (FD). The contact behaviour of rough spheres wi…
▽ More
Normal contact behaviour between non adhesive fractal rough particles is studied using a finite element method (FEM). A series of spherical grain surfaces with distinguished roughness features are generated by means of Spherical Harmonics. These surfaces are described by two roughness descriptors, namely, relative roughness (Rr) and fractal dimension (FD). The contact behaviour of rough spheres with a rigid flat surface is simulated using FEM to quantify the influences of surface structure and sphere morphology by focusing on contact stiffness and true contact area. The dependence of normal contact stiffness (k) on applied normal force (F) is found to follow a power law over four orders of magnitude, with both alpha and beta being highly correlated with Rr and FD. With increasing load, the power exponent converges to that of Hertzian contact, e.g., 1/3, independent of Rr. Regions of true contact evolve through the formation of new microcontacts and their progressive merging, meanwhile the area distributions of contact island induced by various forces tend to obey similar Weibull distributions due to fractal nature in their surfaces. Contacts with larger values of Rr are found to produce contact contours with higher fractal dimension as calculated by a 2D box-counting method. Our results suggest that the correlation between radial lengths in a quasi spherical particle should be considered in studying contact behaviour.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
Enhanced low-energy magnetic excitations evidencing the Cu-induced localization in an Fe-based superconductor Fe$_{0.98}$Te$_{0.5}$Se$_{0.5}$
Authors:
Jinghui Wang,
Song Bao,
Yanyan Shangguan,
Zhengwei Cai,
Yuan Gan,
Shichao Li,
Kejing Ran,
Zhen Ma,
B. L. Winn,
A. D. Christianson,
Ruidan Zhong,
Jun Li,
Genda Gu,
Jinsheng Wen
Abstract:
We have performed inelastic neutron scattering measurements on optimally-doped Fe$_{0.98}$Te$_{0.5}$Se$_{0.5}$ and 10% Cu-doped Fe$_{0.88}$Cu$_{0.1}$Te$_{0.5}$Se$_{0.5}$ to investigate the substitution effects on the spin excitations in the whole energy range up to 300 meV. It is found that substitution of Cu for Fe enhances the low-energy spin excitations ($\le$ 100 meV), especially around the (0…
▽ More
We have performed inelastic neutron scattering measurements on optimally-doped Fe$_{0.98}$Te$_{0.5}$Se$_{0.5}$ and 10% Cu-doped Fe$_{0.88}$Cu$_{0.1}$Te$_{0.5}$Se$_{0.5}$ to investigate the substitution effects on the spin excitations in the whole energy range up to 300 meV. It is found that substitution of Cu for Fe enhances the low-energy spin excitations ($\le$ 100 meV), especially around the (0.5, 0.5) point, and leaves the high-energy magnetic excitations intact. In contrast to the expectation that Cu with spin 1/2 will dilute the magnetic moments contributed by Fe with a larger spin, we find that the 10% Cu doping enlarges the effective fluctuating moment from 2.85 to 3.13 $μ_{\rm B}$/Fe, although there is no long- or short-range magnetic order around (0.5, 0.5) and (0.5, 0). The presence of enhanced magnetic excitations in the 10% Cu doped sample which is in the insulating state indicates that the magnetic excitations must have some contributions from the local moments, reflecting the dual nature of the magnetism in iron-based superconductors. We attribute the substitution effects to the localization of the itinerant electrons induced by Cu dopants. These results also indicate that the Cu doping does not act as electron donor as in a rigid-band shift model, but more as scattering centers that localize the system.
△ Less
Submitted 24 June, 2022;
originally announced June 2022.
-
Continuously Doping Bi 2 Sr 2 CaCu 2 O 8+δ into Electron-Doped Superconductor by CaH 2 Annealing Method
Authors:
Jin Zhao,
Yu-Lin Gan,
Guang Yang,
Yi-Gui Zhong,
Cen-Yao Tang,
Fa-Zhi Yang,
Giao Ngoc Phan,
Qiang-Tao Sui,
Zhong Liu,
Gang Li,
Xiang-Gang Qiu,
Qing-Hua Zhang,
Jie Shen,
Tian Qian,
Li Lu,
Lei Yan,
Gen-Da Gu,
Hong Ding
Abstract:
As a typical hole-doped cuprate superconductor, Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212) carrier doping is mostly determined by its oxygen content. Traditional doping methods can regulate its doping level within the range of hole doping. Here we report the first application of CaH 2 annealing method in regulating the doping level of Bi2212. By continuously controlling the anneal time, a series of different…
▽ More
As a typical hole-doped cuprate superconductor, Bi 2 Sr 2 CaCu 2 O 8+δ (Bi2212) carrier doping is mostly determined by its oxygen content. Traditional doping methods can regulate its doping level within the range of hole doping. Here we report the first application of CaH 2 annealing method in regulating the doping level of Bi2212. By continuously controlling the anneal time, a series of differently doped samples can be obtained. The combined experimental results of x-ray diffraction, scanning transmission electron microscopy, resistance and Hall measurements demonstrate that the CaH 2 induced topochemical reaction can effectively change the oxygen content of Bi2212 within a very wide range, even switching from hole doping to electron doping. We also found evidence of a low-T c superconducting phase in the electron doping side.
△ Less
Submitted 23 June, 2022;
originally announced June 2022.
-
An unexplored valley of binary packing: The loose jamming state
Authors:
Si Suo,
Chongpu Zhai,
Minglong Xu,
Marc Kamlah,
Yixiang Gan
Abstract:
We present a theoretical prediction on random close packing factor φ_RCP^b of binary granular packings based on the hard-sphere fluid theory. An unexplored regime is unravelled, where the packing fraction φ_RCP^b is smaller than that of the mono-sized one φ_RCP^m, i.e., the so-called loose jamming state. This is against our common perception that binary packings should always reach a denser packin…
▽ More
We present a theoretical prediction on random close packing factor φ_RCP^b of binary granular packings based on the hard-sphere fluid theory. An unexplored regime is unravelled, where the packing fraction φ_RCP^b is smaller than that of the mono-sized one φ_RCP^m, i.e., the so-called loose jamming state. This is against our common perception that binary packings should always reach a denser packing than mono-sized packings at the jamming state. Numerical evidence further supports this prediction and confirms the regime location in the size ratio and mole fraction (R_r-X_s) space, where the size ratio R_r is close to 1, and the mole fraction of the smaller sphere X_s close to 0. This extreme regime remains unreported in existing literature, yet significant for our fundamental understanding of binary packing systems.
△ Less
Submitted 4 May, 2022;
originally announced May 2022.
-
Discrete Boltzmann multi-scale modeling of non-equilibrium multiphase flows
Authors:
Yanbiao Gan,
Aiguo Xu,
Huilin Lai,
Wei Li,
Guanglan Sun,
Sauro Succi
Abstract:
The aim of this paper is twofold: the first is to formulate and validate a multi-scale discrete Boltzmann method (DBM) based on density functional kinetic theory for thermal multiphase flow systems, ranging from continuum to transition flow regime; the second is to present some new insights into the thermo-hydrodynamic non-equilibrium (THNE) effects in the phase separation process. Methodologicall…
▽ More
The aim of this paper is twofold: the first is to formulate and validate a multi-scale discrete Boltzmann method (DBM) based on density functional kinetic theory for thermal multiphase flow systems, ranging from continuum to transition flow regime; the second is to present some new insights into the thermo-hydrodynamic non-equilibrium (THNE) effects in the phase separation process. Methodologically, DBM includes three main pillars: (i) the determination of the fewest kinetic moment relations, which are required by the description of significant THNE effects beyond the realm of continuum fluid mechanics, (ii) the construction of appropriate discrete equilibrium distribution function recovering all the desired kinetic moments, (iii) the detection, description, presentation and analysis of THNE based on the moments of the non-equilibrium distribution ($f-f^{(eq)}$). The incorporation of appropriate additional higher-order thermodynamic kinetic moments considerably extends the DBM's capability of handling larger values of the liquid-vapor density ratio, curbing spurious currents, and ensuring mass-momentum-energy conservation. Compared with the DBM with only first-order THNE (Gan et al. Soft Matter 11,5336), the model retrieves kinetic moments beyond the third-order super-Burnett level, and is accurate for weak, moderate, and strong THNE cases even when the local Knudsen number exceeds $1/3$. Physically, the ending point of the linear relation between THNE and the concerned physical parameter provides a distinct criterion to identify whether the system is near or far from equilibrium. Besides, the surface tension refrains the local THNE around the interface, but expands the THNE range and strengthens the THNE intensity away from the interface through interface smoothing and widening.
△ Less
Submitted 4 September, 2022; v1 submitted 23 March, 2022;
originally announced March 2022.
-
Contact conductance governs metallicity in conducting metal oxide nanocrystal films
Authors:
Corey M. Staller,
Stephen L. Gibbs,
Xing Yee Gan,
Jay T. Bender,
Karalee Jarvis,
Gary K. Ong,
Delia J. Milliron
Abstract:
In bulk semiconductor materials, the insulator-metal transition (IMT) is governed by the concentration of conduction electrons. Meanwhile, even when fabricated from metallic building blocks, nanocrystal films are often insulating with inter-nanocrystal contacts acting as electron transport bottlenecks. Using a library of transparent conducting tin-doped indium oxide nanocrystal films with varied e…
▽ More
In bulk semiconductor materials, the insulator-metal transition (IMT) is governed by the concentration of conduction electrons. Meanwhile, even when fabricated from metallic building blocks, nanocrystal films are often insulating with inter-nanocrystal contacts acting as electron transport bottlenecks. Using a library of transparent conducting tin-doped indium oxide nanocrystal films with varied electron concentration, size, and contact area, we test candidate criteria for the IMT and establish a phase diagram for electron transport behavior. From variable temperature conductivity measurements, we learn that both the IMT and a subsequent crossover to conventional metallic behavior near room temperature are governed by the conductance of the inter-nanocrystal contacts. To cross the IMT, inter-nanocrystal coupling must be sufficient to overcome the charging energy of a nanocrystal, while conventional metallic behavior requires contact conductance to reach the conductance of a nanocrystal. This understanding can enable the design and fabrication of metallic conducting materials from nanocrystal building blocks.
△ Less
Submitted 15 February, 2022; v1 submitted 20 November, 2021;
originally announced November 2021.
-
Relevance of sample geometry on the in-plane anisotropy of SrxBi2Se3 superconductor
Authors:
Xinrun Mi,
Yecheng Jing,
Kunya Yang,
Yuhan Gan,
Aifeng Wang,
Yisheng Chai,
Mingquan He
Abstract:
Possible emergence of nematic superconductivity that breaks its underlying lattice symmetry in doped topological insulator Bi$_2$Se$_3$,establishes this system as a unique candidate of topological superconductors. Exclusion of possible extrinsic causes for the two-fold superconductivity is essential to clarify its topological nature. Here, we present electrical transport on Sr$_x$Bi$_2$Se$_3$ supe…
▽ More
Possible emergence of nematic superconductivity that breaks its underlying lattice symmetry in doped topological insulator Bi$_2$Se$_3$,establishes this system as a unique candidate of topological superconductors. Exclusion of possible extrinsic causes for the two-fold superconductivity is essential to clarify its topological nature. Here, we present electrical transport on Sr$_x$Bi$_2$Se$_3$ superconductors with rectangular and circular geometries. The occurrence of the two-fold symmetric in-plane upper critical field $H_{c2}$ is found to be weakly geometry dependent. However, the anisotropic ratio between the maximum and minimum in-plane upper critical fields varies significantly among samples with different shapes. Compared with the rectangular sample, the anisotropic ratio is largely suppressed in the circular sample which has higher geometric rotational symmetry. Our results imply that sample geometry plays a subdominant role, but circular shape is more ideal to reveal the two-fold superconductivity of Sr$_x$Bi$_2$Se$_3$ in the vortex state.
△ Less
Submitted 27 October, 2021;
originally announced October 2021.
-
Magneto-Seebeck effect and ambipolar Nernst effect in CsV$_3$Sb$_5$ superconductor
Authors:
Yuhan Gan,
Wei Xia,
Long Zhang,
Kunya Yang,
Xinrun Mi,
Aifeng Wang,
Yisheng Chai,
Yanfeng Guo,
Xiaoyuan Zhou,
Mingquan He
Abstract:
We present a study of Seebeck and Nernst effect in combination with magnetoresistance and Hall measurements of the Kagome superconductor CsV$_3$Sb$_5$. Sizable magneto-Seebeck signal appears once the charge density wave (CDW) order sets in below $T_{CDW}$=94 K. The Nernst signal peaks at a lower temperature $T^*$=35 K, crossing which the Hall coefficient switches sign, which we attribute to the am…
▽ More
We present a study of Seebeck and Nernst effect in combination with magnetoresistance and Hall measurements of the Kagome superconductor CsV$_3$Sb$_5$. Sizable magneto-Seebeck signal appears once the charge density wave (CDW) order sets in below $T_{CDW}$=94 K. The Nernst signal peaks at a lower temperature $T^*$=35 K, crossing which the Hall coefficient switches sign, which we attribute to the ambipolar transport of compensated bands due to the multi-band nature of CsV$_3$Sb$_5$. Sublinear Nernst signal as a function of magnetic field, together with large anomalous Nernst effect (ANE) also emerge inside the CDW phase, despite the absence of long-range magnetic order. These findings suggest that, the transport properties are dominated by small pockets with multi-band profile, and that the unusual band topology also plays an import role in the CDW state of CsV$_3$Sb$_5$.
△ Less
Submitted 4 October, 2021; v1 submitted 1 October, 2021;
originally announced October 2021.
-
Three-dimensional vibrations of multilayered hollow spheres submerged in a complex fluid
Authors:
B. Wu,
Y. Gan,
E. Carrera3,
W. Q. Chen
Abstract:
This paper presents a three-dimensional analytical study of the intrinsic free vibration of an elastic multilayered hollow sphere interacting with an exterior non-Newtonian fluid medium. The fluid is assumed to be characterized by a compressible linear viscoelastic model accounting for both the shear and compressional relaxation processes. For small-amplitude vibrations, the equations governing th…
▽ More
This paper presents a three-dimensional analytical study of the intrinsic free vibration of an elastic multilayered hollow sphere interacting with an exterior non-Newtonian fluid medium. The fluid is assumed to be characterized by a compressible linear viscoelastic model accounting for both the shear and compressional relaxation processes. For small-amplitude vibrations, the equations governing the viscoelastic fluid can be linearized, which are then solved by introducing appropriate potential functions. The solid is assumed to exhibit a particular material anisotropy, i.e. spherical isotropy, which includes material isotropy as a special case. The equations governing the anisotropic solid are solved in spherical coordinates using the state-space formalism, which finally establishes two separate transfer relations correlating the state vectors at the innermost surface with those at the outermost surface of the multilayered hollow sphere. By imposing the continuity conditions at the fluid-solid interface, two separate analytical characteristic equations are derived, which characterize two independent classes of vibration. Numerical examples are finally conducted to validate the theoretical derivation as well as to investigate the effects of various factors, including fluid viscosity and compressibility, fluid viscoelasticity, solid anisotropy and surface effect, as well as solid intrinsic damping, on the vibration characteristics of the submerged hollow sphere. Particularly, our theoretically predicted vibration frequencies and quality factors of gold nanospheres with intrinsic damping immersed in water agree exceptionally well with the available experimentally measured results. The reported analytical solution is truly and fully three-dimensional, covering from the purely radial breathing mode to torsional mode to any general spheroidal mode.
△ Less
Submitted 28 July, 2021;
originally announced July 2021.
-
Tailoring porous media for controllable capillary flow
Authors:
MingchaoLiu,
Si Suo,
Jian Wu,
Yixiang Gan,
DorianAH HanaorcC. Q. Chen
Abstract:
Hypothesis Control of capillary flow through porous media has broad practical implications. However, achieving accurate and reliable control of such processes by tuning the pore size or by modification of interface wettability remains challenging. Here we propose that the flow of liquid by capillary penetration can be accurately adjusted by tuning the geometry of porous media and develop numerical…
▽ More
Hypothesis Control of capillary flow through porous media has broad practical implications. However, achieving accurate and reliable control of such processes by tuning the pore size or by modification of interface wettability remains challenging. Here we propose that the flow of liquid by capillary penetration can be accurately adjusted by tuning the geometry of porous media and develop numerical method to achieve this. Methodologies On the basis of Darcys law, a general framework is proposed to facilitate the control of capillary flow in porous systems by tailoring the geometric shape of porous structures. A numerical simulation approach based on finite element method is also employed to validate the theoretical prediction. Findings A basic capillary component with a tunable velocity gradient is designed according to the proposed framework. By using the basic component, two functional capillary elements, namely, (i) flow amplifier and (ii) flow resistor, are demonstrated. Then, multi functional fluidic devices with controllable capillary flow are realized by integrating the designed capillary elements. All the theoretical designs are validated by numerical simulations. Finally, it is shown that the proposed model can be extended to three dimensional designs of porous media
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
Scalable Surface Area Characterization by Electrokinetic Analysis of Complex Anion Adsorption
Authors:
Dorian A. H. Hanaor,
Maliheh Ghadiri,
Wojciech Chrzanowski,
Yixiang Gan
Abstract:
By means of the in situ electrokinetic assessment of aqueous particles in conjunction with the addition of anionic adsorbates, we develop and examine a new approach to the scalable characterization of the specific accessible surface area of particles in water. For alumina powders of differing morphology in mildly acidic aqueous suspensions, the effective surface charge was modified by carboxylate…
▽ More
By means of the in situ electrokinetic assessment of aqueous particles in conjunction with the addition of anionic adsorbates, we develop and examine a new approach to the scalable characterization of the specific accessible surface area of particles in water. For alumina powders of differing morphology in mildly acidic aqueous suspensions, the effective surface charge was modified by carboxylate anion adsorption through the incremental addition of oxalic and citric acids. The observed zeta potential variation as a function of the proportional reagent additive was found to exhibit inverse hyperbolic sine-type behavior predicted to arise from monolayer adsorption following the Grahame-Langmuir model. Through parameter optimization by inverse problem solving, the zeta potential shift with relative adsorbate addition revealed a nearly linear correlation of a defined surface-area-dependent parameter with the conventionally measured surface area values of the powders, demonstrating that the proposed analytical framework is applicable for the in situ surface area characterization of aqueous particulate matter. The investigated methods have advantages over some conventional surface analysis techniques owing to their direct applicability in aqueous environments at ambient temperature and the ability to modify analysis scales by variation of the adsorption cross section.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
Static friction at fractal interfaces
Authors:
Dorian Hanaor,
Yixiang Gan,
Itai Einav
Abstract:
Tribological phenomena are governed by combined effects of material properties, topology and surface-chemistry. We study the interplay of multiscale surface structures with molecular-scale interactions towards interpreting static frictional interactions at fractal interfaces. By spline-assisted-discretization we analyse asperity interactions in pairs of contacting fractal surface-profiles. For ela…
▽ More
Tribological phenomena are governed by combined effects of material properties, topology and surface-chemistry. We study the interplay of multiscale surface structures with molecular-scale interactions towards interpreting static frictional interactions at fractal interfaces. By spline-assisted-discretization we analyse asperity interactions in pairs of contacting fractal surface-profiles. For elastically deforming asperities, force analysis reveals greater friction at surfaces exhibiting higher fractality, with increasing molecular-scale friction amplifying this trend. Increasing adhesive strength yields higher overall friction at surfaces of lower fractality owing to greater true-contact-area. In systems where adhesive-type interactions play an important role, such as those where cold-welded junctions form, friction is minimised at an intermediate value of surface profile fractality found to be around 1.3 to 1.5. Results have implications for systems exhibiting evolving surface structures.
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
Contact mechanics of fractal surfaces by spline assisted discretisation
Authors:
Dorian Hanaor,
Yixiang Gan,
Itai Einav
Abstract:
We present a newly developed approach for the calculation of interfacial stiffness and contact area evolution between two rough bodies exhibiting self affine surface structures. Using spline assisted discretization to define localised contact normals and surface curvatures we interpret the mechanics of simulated non-adhesive elastic surface-profiles subjected to normal loading by examining discret…
▽ More
We present a newly developed approach for the calculation of interfacial stiffness and contact area evolution between two rough bodies exhibiting self affine surface structures. Using spline assisted discretization to define localised contact normals and surface curvatures we interpret the mechanics of simulated non-adhesive elastic surface-profiles subjected to normal loading by examining discrete contact points as projected Hertzian spheres. The analysis of rough-to-rough contact mechanics for surface profiles exhibiting fractal structures, with fractal dimensions in the regime 1 2, reveals the significant effect of surface fractality on contact mechanics and compliance with surfaces having the same mean roughness but higher fractality showing lower contact stiffness in conditions of initial contact for a given load. The predicted linear development of true contact area with load was found to be consistent with diverse existing numerical and experimental studies. Results from this model demonstrate the applicability of the developed method for the meaningful contact analysis of hierarchical structures with implications for modelling tribological interactions between pairs of rough surfaces
△ Less
Submitted 2 June, 2021;
originally announced June 2021.
-
Stacking faults in $α$-RuCl$_3$ revealed by local electric polarization
Authors:
Xinrun Mi,
Xiao Wang,
Hengrui Gui,
Maochai Pi,
Tingting Zheng,
Kunya Yang,
Yuhan Gan,
Peipei Wang,
Alei Li,
Aifeng Wang,
Liyuan Zhang,
Yixi Su,
Yisheng Chai,
Mingquan He
Abstract:
We present out-of-plane dielectric and magnetodielectric measurements of single crystallines $α$-RuCl$_3$ with various degrees of stack faults. A frequency dependent, but field independent, dielectric anomaly appears at $T_{A}\:(f=100\:\mathrm{kHz})\sim$ 4 K once both magnetic transitions at $T_{N1}\sim$ 7 K and $T_{N2}\sim$ 14 K set in. The observed dielectric anomaly is attributed to the emergen…
▽ More
We present out-of-plane dielectric and magnetodielectric measurements of single crystallines $α$-RuCl$_3$ with various degrees of stack faults. A frequency dependent, but field independent, dielectric anomaly appears at $T_{A}\:(f=100\:\mathrm{kHz})\sim$ 4 K once both magnetic transitions at $T_{N1}\sim$ 7 K and $T_{N2}\sim$ 14 K set in. The observed dielectric anomaly is attributed to the emergency of possible local electric polarizations whose inversion symmetry is broken by inhomogeneously distributed stacking faults. A field-induced intermediate phase is only observed when a magnetic field is applied perpendicular to the Ru-Ru bonds for samples with minimal stacking faults. Less pronounced in-plane anisotropy is found in samples with sizable contribution from stacking imperfections. Our findings suggest that dielectric measurement is a sensitive probe in detecting the structural and magnetic properties, which may be a promising tool especially in studying $α$-RuCl$_3$ thin film devices. Moreover, the stacking details of RuCl$_3$ layers strongly affect the ground state both in the magnetic and electric channels. Such a fragile ground state against stacking faults needs to be overcome for realistic applications utilizing the magnetic and/or electric properties of Kitaev based physics in $α$-RuCl$_3$.
△ Less
Submitted 28 April, 2021;
originally announced April 2021.
-
Cyclic thermo-mechanical performance of granular beds: Effect of elastoplasticity
Authors:
Si Suo,
Marigrazia Moscardini,
Verena Becker,
Yixiang Gan,
Marc Kamlah
Abstract:
Understanding the coupled thermo-mechanical behaviour of compacted granular beds can benefit various industrial applications, such as pebble bed design in fusion reactors. In this study, a thermo-mechanical discrete element method based on our previous work is improved and adapted to investigate the cyclic thermo-mechanical performance of gas-filled granular materials composed of elastoplastic gra…
▽ More
Understanding the coupled thermo-mechanical behaviour of compacted granular beds can benefit various industrial applications, such as pebble bed design in fusion reactors. In this study, a thermo-mechanical discrete element method based on our previous work is improved and adapted to investigate the cyclic thermo-mechanical performance of gas-filled granular materials composed of elastoplastic grains. An interparticle contact model is developed considering the plastic deformation of grains. Through the simulation on a representative volume element of beryllium pebble beds, we provide grain-scale insight into the evolution of thermal conductivity and stress. The simulation results suggest that the network of thermal contacts is impeded by plastic deformation leading to a significant drop of thermal conductivity during cooling. This effect can be suppressed by increasing the initial packing factor. Not limited to pebble bed design, the conclusion of this work can also pave the way for optimizing powder-based manufacturing and energy storage, where combined thermo-mechanical loading conditions and elastoplastic deformation of individual particles are involved.
△ Less
Submitted 1 April, 2021;
originally announced April 2021.
-
Two-dimensional modeling of the self-limiting oxidation in silicon and tungsten nanowires
Authors:
Mingchao Liu,
Peng Jin,
Zhiping Xu,
Dorian A. H. Hanaor,
Yixiang Gan,
Changqing Chen
Abstract:
Self-limiting oxidation of nanowires has been previously described as a reaction- or diffusion-controlled process. In this letter, the concept of finite reactive region is introduced into a diffusion-controlled model, based upon which a two-dimensional cylindrical kinetics model is developed for the oxidation of silicon nanowires and is extended for tungsten. In the model, diffusivity is affected…
▽ More
Self-limiting oxidation of nanowires has been previously described as a reaction- or diffusion-controlled process. In this letter, the concept of finite reactive region is introduced into a diffusion-controlled model, based upon which a two-dimensional cylindrical kinetics model is developed for the oxidation of silicon nanowires and is extended for tungsten. In the model, diffusivity is affected by the expansive oxidation reaction induced stress. The dependency of the oxidation upon curvature and temperature is modeled. Good agreement between the model predictions and available experimental data is obtained. The developed model serves to quantify the oxidation in two-dimensional nanostructures and is expected to facilitate their fabrication via thermal oxidation techniques. https://doi.org/10.1016/j.taml.2016.08.002
△ Less
Submitted 20 November, 2019;
originally announced November 2019.
-
Gate-tunable Rashba spin-orbit coupling and spin polarization at diluted oxide interfaces
Authors:
Yulin Gan,
Yu Zhang,
Dennis V. Christensen,
Nini Pryds,
Yunzhong Chen
Abstract:
Diluted oxide interface of LaAl1-xMnxO/SrTiO3 (LAMO/STO) provides a new way of tuning the ground states of the interface between the two band insulators of LAO and STO from metallic/superconducting to highly insulating. Increasing the Mn doping level (x) leads to a delicate control of the carrier density as well as a raise in the electron mobility and spin polarization. Herein, we demonstrate a tu…
▽ More
Diluted oxide interface of LaAl1-xMnxO/SrTiO3 (LAMO/STO) provides a new way of tuning the ground states of the interface between the two band insulators of LAO and STO from metallic/superconducting to highly insulating. Increasing the Mn doping level (x) leads to a delicate control of the carrier density as well as a raise in the electron mobility and spin polarization. Herein, we demonstrate a tunable Rashba spin-orbit coupling (SOC) and spin polarization of LAMO/STO (0.2 <= x <= 0.3) by applying a back gate. The presence of SOC causes the splitting of energy band into two branches by a spin splitting energy. The maximum spin splitting energy depends on the Mn doping and decreases with the increasing Mn content and then vanishes at x = 0.3. The carrier density dependence of the spin splitting energy for different compositions shows a dome-shaped behavior with a maximum at different normalized carrier density. These findings have not yet been observed in LAO/STO interfaces. A fully back-gate-tunable spin-polarized 2DEL is observed at the interface with x = 0.3 where only dxy orbits are populated (5.3E12 cm-2 <= ns <= 1.0E13 cm-2). The present results shed light on unexplored territory in SOC at STO-base oxide heterostructures and make LAMO/STO an intriguing platform for spin-related phenomena in 3d-electron systems.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
Isotropic charge screening of the anisotropic black phosphorus revealed by potassium adatoms
Authors:
Zhen Tian,
Yu Gan,
Taiming Zhang,
Binbin Wang,
Hengxing Ji,
Yexin Feng,
Jiamin Xue
Abstract:
Black phosphorus has attracted great research interest due to its numerous applications in electronic devices, optoelectronic devices, energy storages and so on. Compared with the majority of two-dimensional materials, black phosphorus possesses a unique property, i.e. the strong in-plane anisotropy. All the properties reported so far, including its effective mass, electron mobility, light absorpt…
▽ More
Black phosphorus has attracted great research interest due to its numerous applications in electronic devices, optoelectronic devices, energy storages and so on. Compared with the majority of two-dimensional materials, black phosphorus possesses a unique property, i.e. the strong in-plane anisotropy. All the properties reported so far, including its effective mass, electron mobility, light absorption, thermal conductivity and so on, have shown great anisotropy in the basal plane. This property renders black phosphorus unique applications not achievable with other two-dimensional materials. In this work, however, we discover a remarkable isotropic behavior in the strongly anisotropic black phosphorus, i.e. its electrostatic screening of point charges. We use the tip-induced band bending of a scanning tunneling microscope to map out the Coulomb field of ionized potassium adatoms on black phosphorus, and reveal its isotropic charge screening. This discovery is important for understanding electron scattering and transport in black phosphorus.
△ Less
Submitted 18 August, 2019;
originally announced August 2019.
-
Fingering patterns in hierarchical porous media
Authors:
Si Suo,
Mingchao Liu,
Yixiang Gan
Abstract:
Porous media with hierarchical structures are commonly encountered in both natural and synthetic materials, e.g., fractured rock formations, porous electrodes and fibrous materials, which generally consist of two or more distinguishable levels of pore structure with different characteristic lengths. The multiphase flow behaviours in hierarchical porous media have remained elusive. In this study, w…
▽ More
Porous media with hierarchical structures are commonly encountered in both natural and synthetic materials, e.g., fractured rock formations, porous electrodes and fibrous materials, which generally consist of two or more distinguishable levels of pore structure with different characteristic lengths. The multiphase flow behaviours in hierarchical porous media have remained elusive. In this study, we investigate the influences of hierarchical structures in porous media on the dynamics of immiscible fingering during fluid-fluid displacement. By conducting a series of numerical simulations, we found that the immiscible fingering can be suppressed due to the existence of secondary porous structures. To characterise the fingering dynamics in hierarchical porous media, a phase diagram is constructed by introducing a scaling parameter, i.e., the ratio of time scales considering the combined effect of characteristic pore sizes and wettability. The findings present in this work provide a basis for further research on the application of hierarchical porous media for controlling immiscible fingerings.
△ Less
Submitted 12 February, 2020; v1 submitted 5 July, 2019;
originally announced July 2019.
-
Diluted Oxide Interfaces with Tunable Ground States
Authors:
Yulin Gan,
Dennis Valbjørn Christensen,
Yu Zhang,
Hongrui Zhang,
Krishnan Dileep,
Zhicheng Zhong,
Wei Niu,
Damon James Carrad,
Kion Norrman,
Merlin von Soosten,
Thomas sand Jespersen,
Baogen Shen,
Nicolas Gauquelin,
Johan Verbeeck,
Jirong Sun,
Nini Pryds,
Yunzhong Chen
Abstract:
The metallic interface between two oxide insulators, such as LaAlO3/SrTiO3 (LAO/STO), provides new opportunities for electronics and spintronics. However, due to the presence of multiple orbital populations, tailoring the interfacial properties such as the ground state and metal-insulator transitions remains challenging. Here, we report an unforeseen tunability of the phase diagram of LAO/STO by a…
▽ More
The metallic interface between two oxide insulators, such as LaAlO3/SrTiO3 (LAO/STO), provides new opportunities for electronics and spintronics. However, due to the presence of multiple orbital populations, tailoring the interfacial properties such as the ground state and metal-insulator transitions remains challenging. Here, we report an unforeseen tunability of the phase diagram of LAO/STO by alloying LAO with a ferromagnetic LaMnO3 insulator without forming lattice disorder and at the same time without changing the polarity of the system. By increasing the Mn-doping level, x, of LaAl1-xMnxO3/STO, the interface undergoes a Lifshitz transition at x = 0.225 across a critical carrier density of nc= 2.8E13 cm-2, where a peak TSC =255 mK of superconducting transition temperature is observed. Moreover, the LaAl1-xMnxO3 turns ferromagnetic at x >=0.25. Remarkably, at x = 0.3, where the metallic interface is populated by only dxy electrons and just before it becomes insulating, we achieve reproducibly a same device with both signatures of superconductivity and clear anomalous Hall effect. This provides a unique and effective way to tailor oxide interfaces for designing on-demand electronic and spintronic devices.
△ Less
Submitted 15 January, 2019;
originally announced January 2019.
-
Pore-scale Modelling of Gravity-driven Drainage in Disordered Porous Media
Authors:
Guanzhe Cui,
Mingchao Liu,
Weijing Dai,
Yixiang Gan
Abstract:
Multiphase flow through a porous medium involves complex interactions between gravity, wettability and capillarity during drainage process. In contrast to these factors, the effect of pore distribution on liquid retention is less understood. In particular, the quantitative correlation between the fluid displacement and level of disorder has not yet been established. In this work, we employ direct…
▽ More
Multiphase flow through a porous medium involves complex interactions between gravity, wettability and capillarity during drainage process. In contrast to these factors, the effect of pore distribution on liquid retention is less understood. In particular, the quantitative correlation between the fluid displacement and level of disorder has not yet been established. In this work, we employ direct numerical simulation by solving the Navier-Stokes equations and using volume of fluid method to track the liquid-liquid interface during drainage in disordered porous media. The disorder of pore configuration is characterized by an improved index to capture small microstructural perturbation, which is pivotal for fluid displacement in porous media. Then, we focus on the residual volume and morphological characteristics of saturated zones after drainage and compare the effect of disorder under different wettability (i.e., the contact angle) and gravity (characterized by a modified Bond number) conditions. Pore-scale simulations reveal that the highly-disordered porous medium is favourable to improve liquid retention and provide various morphologies of entrapped saturated zones. Furthermore, the disorder index has a positive correlation to the characteristic curve index (n) in van Genuchten equation, controlling the shape of the retention characteristic curves. It is expected that the findings will benefit to a broad range of industrial applications involving drainage processes in porous media, e.g., drying, carbon sequestration, and underground water remediation.
△ Less
Submitted 29 October, 2018;
originally announced October 2018.
-
Nonequilibrium and morphological characterizations of Kelvin-Helmholtz instability in compressible flows
Authors:
Yanbiao Gan,
Aiguo Xu,
Guangcai Zhang,
Chuandong Lin,
Huilin Lai,
Zhipeng Liu
Abstract:
We investigate the effects of viscosity and heat conduction on the onset and growth of Kelvin-Helmholtz instability (KHI) via an efficient discrete Boltzmann model. Technically, two effective approaches are presented to quantitatively analyze and understand the configurations and kinetic processes. One is to determine the thickness of mixing layers through tracking the distributions and evolutions…
▽ More
We investigate the effects of viscosity and heat conduction on the onset and growth of Kelvin-Helmholtz instability (KHI) via an efficient discrete Boltzmann model. Technically, two effective approaches are presented to quantitatively analyze and understand the configurations and kinetic processes. One is to determine the thickness of mixing layers through tracking the distributions and evolutions of the thermodynamic nonequilibrium (TNE) measures; the other is to evaluate the growth rate of KHI from the slopes of morphological functionals. Physically, it is found that the time histories of width of mixing layer, TNE intensity, and boundary length show high correlation and attain their maxima simultaneously. The viscosity effects are twofold, stabilize the KHI, and enhance both the local and global TNE intensities. Contrary to the monotonically inhibiting effects of viscosity, the heat conduction effects firstly refrain then enhance the evolution afterwards. The physical reasons are analyzed and presented.
△ Less
Submitted 26 March, 2019; v1 submitted 12 September, 2018;
originally announced September 2018.
-
The effects of packing structure on the effective thermal conductivity of granular media: A grain scale investigation
Authors:
Weijing Dai,
Dorian Hanaor,
Yixiang Gan
Abstract:
Structural characteristics are considered to be the dominant factors in determining the effective properties of granular media, particularly in the scope of transport phenomena. Towards improved heat management, thermal transport in granular media requires an improved fundamental understanding. In this study, the effects of packing structure on heat transfer in granular media are evaluated at macr…
▽ More
Structural characteristics are considered to be the dominant factors in determining the effective properties of granular media, particularly in the scope of transport phenomena. Towards improved heat management, thermal transport in granular media requires an improved fundamental understanding. In this study, the effects of packing structure on heat transfer in granular media are evaluated at macro- and grain-scales. At the grain-scale, a gas-solid coupling heat transfer model is adapted into a discrete-element-method to simulate this transport phenomenon. The numerical framework is validated by experimental data obtained using a plane source technique, and the Smoluschowski effect of the gas phase is found to be captured by this extension. By considering packings of spherical SiO2 grains with an interstitial helium phase, vibration induced ordering in granular media is studied, using the simulation methods developed here, to investigate how disorder-to-order transitions of packing structure enhance effective thermal conductivity. Grain-scale thermal transport is shown to be influenced by the local neighbourhood configuration of individual grains. The formation of an ordered packing structure enhances both global and local thermal transport. This study provides a structure approach to explain transport phenomena, which can be applied in properties modification for granular media.
△ Less
Submitted 5 September, 2018;
originally announced September 2018.
-
Entropy production in thermal phase separation: a kinetic-theory approach
Authors:
Yudong Zhang,
Aiguo Xu,
Guangcai Zhang,
Yanbiao Gan,
Zhihua Chen,
Sauro Succi
Abstract:
Entropy production during the process of thermal phase-separation of multiphase flows is investigated by means of a discrete Boltzmann kinetic model. The entropy production rate is found to increase during the spinodal decomposition stage and to decrease during the domain growth stage, attaining its maximum at the crossover between the two. Such behaviour provides a natural criterion to identify a…
▽ More
Entropy production during the process of thermal phase-separation of multiphase flows is investigated by means of a discrete Boltzmann kinetic model. The entropy production rate is found to increase during the spinodal decomposition stage and to decrease during the domain growth stage, attaining its maximum at the crossover between the two. Such behaviour provides a natural criterion to identify and discriminate between the two regimes. Furthermore, the effects of heat conductivity, viscosity and surface tension on the entropy production rate are investigated by systematically probing the interplay between non-equilibrium energy and momentum fluxes. It is found that the entropy production rate due to energy fluxes is an increasing function of the Prandtl number, while the momentum fluxes exhibit an opposite trend. On the other hand, both contributions show an increasing trend with surface tension. The present analysis inscribes within the general framework of non-equilibrium thermodynamics and consequently it is expected to be relevant to a broad class of soft-flowing systems far from mechanical and thermal equilibrium.
△ Less
Submitted 15 March, 2019; v1 submitted 23 August, 2018;
originally announced August 2018.
-
Raman evidence for dimerization and Mott collapse in $α$-RuCl$_3$ under pressures
Authors:
Gaomin Li,
Xiaobin Chen,
Yuan Gan,
Fenglei Li,
Mingqi Yan,
Shenghai Pei,
Yujun Zhang,
Le Wang,
Huimin Su,
Junfeng Dai,
Yuanzhen Chen,
Youguo Shi,
XinWei Wang,
Liyuan Zhang,
Shanmin Wang,
Dapeng Yu,
Fei Ye,
Jia-Wei Mei,
Mingyuan Huang
Abstract:
We perform Raman spectroscopy studies on $α$-RuCl$_3$ at room temperature to explore its phase transitions of magnetism and chemical bonding under pressures. The Raman measurements resolve two critical pressures, about $p_1=1.1$~GPa and $p_2=1.7$~GPa, involving very different intertwining behaviors between the structural and magnetic excitations. With increasing pressures, a stacking order phase t…
▽ More
We perform Raman spectroscopy studies on $α$-RuCl$_3$ at room temperature to explore its phase transitions of magnetism and chemical bonding under pressures. The Raman measurements resolve two critical pressures, about $p_1=1.1$~GPa and $p_2=1.7$~GPa, involving very different intertwining behaviors between the structural and magnetic excitations. With increasing pressures, a stacking order phase transition of $α$-RuCl$_3$ layers develops at $p_1=1.1$~GPa, indicated by the new Raman phonon modes and the modest Raman magnetic susceptibility adjustment.
The abnormal softening and splitting of the Ru in-plane Raman mode provide direct evidence of the in-plane dimerization of the Ru-Ru bonds at $p_2=1.7$~GPa. The Raman susceptibility is greatly enhanced with pressure increasing and sharply suppressed after the dimerization. We propose that the system undergoes Mott collapse at $p_2=1.7$~GPa and turns into a dimerized correlated band insulator. Our studies demonstrate competitions between Kitaev physics, magnetism, and chemical bondings in Kitaev compounds.
△ Less
Submitted 21 July, 2018;
originally announced July 2018.
-
Unusual phonon density of states and response to the superconducting transition in the In-doped topological crystalline insulator Pb$_{0.5}$Sn$_{0.5}$Te
Authors:
Kejing Ran,
Ruidan Zhong,
Tong Chen,
Yuan Gan,
Jinghui Wang,
B. L. Winn,
A. D. Christianson,
Shichao Li,
Zhen Ma,
Song Bao,
Zhengwei Cai,
Guangyong Xu,
J. M. Tranquada,
Genda Gu,
Jian Sun,
Jinsheng Wen
Abstract:
We present inelastic neutron scattering results of phonons in (Pb$_{0.5}$Sn$_{0.5}$)$_{1-x}$In$_x$Te powders, with $x=0$ and 0.3. The $x=0$ sample is a topological crystalline insulator, and the $x=0.3$ sample is a superconductor with a bulk superconducting transition temperature $T_c$ of 4.7 K. In both samples, we observe unexpected van Hove singularities in the phonon density of states at energi…
▽ More
We present inelastic neutron scattering results of phonons in (Pb$_{0.5}$Sn$_{0.5}$)$_{1-x}$In$_x$Te powders, with $x=0$ and 0.3. The $x=0$ sample is a topological crystalline insulator, and the $x=0.3$ sample is a superconductor with a bulk superconducting transition temperature $T_c$ of 4.7 K. In both samples, we observe unexpected van Hove singularities in the phonon density of states at energies of 1--2.5 meV, suggestive of local modes. On cooling the superconducting sample through $T_c$, there is an enhancement of these features for energies below twice the superconducting-gap energy. We further note that the superconductivity in (Pb$_{0.5}$Sn$_{0.5}$)$_{1-x}$In$_x$Te occurs in samples with normal-state resistivities of order 10 m$Ω$~cm, indicative of bad-metal behavior. Calculations based on density functional theory suggest that the superconductivity is easily explainable in terms of electron-phonon coupling; however, they completely miss the low-frequency modes and do not explain the large resistivity. While the bulk superconducting state of (Pb$_{0.5}$Sn$_{0.5}$)$_{0.7}$In$_{0.3}$Te appears to be driven by phonons, a proper understanding will require ideas beyond simple BCS theory.
△ Less
Submitted 19 June, 2018;
originally announced June 2018.
-
Multi-carrier transport in ZrTe5 film
Authors:
Fangdong Tang,
Peipei Wang,
Peng Wang,
Yuan Gan,
Le Wang,
Wei Zhang,
Liyuan Zhang
Abstract:
The single layer of Zirconium pentatelluride (ZrTe5) has been predicted to be a large-gap two-dimensional (2D) topological insulator, which has attracted particular attention in the topological phase transitions and potential device application. Here we investigated the transport properties in ZrTe5 films with the dependence of thickness from a few nm to several hundred nm. We find that the temper…
▽ More
The single layer of Zirconium pentatelluride (ZrTe5) has been predicted to be a large-gap two-dimensional (2D) topological insulator, which has attracted particular attention in the topological phase transitions and potential device application. Here we investigated the transport properties in ZrTe5 films with the dependence of thickness from a few nm to several hundred nm. We find that the temperature of the resistivity anomaly's peak (Tp) is inclining to increase as the thickness decreases, and around a critical thickness of ~40 nm, the dominating carriers in the films change from n-type to p-type. With comprehensive studying of the Shubnikov-de Hass (SdH) oscillations and Hall resistance at variable temperatures, we demonstrate the multi-carrier transport instinct in the thin films. We extract the carrier densities and mobilities of two majority carriers using the simplified two-carrier model. The electron carriers can be attributed to the Dirac band with a non-trivial Berry's phase π, while the hole carriers may originate from the surface chemical reaction or unintentional doping during the microfabrication process. It is necessary to encapsulate ZrTe5 film in the inert or vacuum environment to make a substantial improvement in the device quality.
△ Less
Submitted 5 June, 2018;
originally announced June 2018.
-
Modes of wall induced granular crystallisation in vibrational packing
Authors:
Weijing Dai,
Joerg Reimann,
Dorian Hanaor,
Claudio Ferrero,
Yixiang Gan
Abstract:
Granular crystallisation is an important phenomenon whereby ordered packing structures form in granular matter under vibration. However, compared with the well-developed principles of crystallisation at the atomic scale, crystallisation in granular matter remains relatively poorly understood. To investigate this behaviour further and bridge the fields of granular matter and materials science, we s…
▽ More
Granular crystallisation is an important phenomenon whereby ordered packing structures form in granular matter under vibration. However, compared with the well-developed principles of crystallisation at the atomic scale, crystallisation in granular matter remains relatively poorly understood. To investigate this behaviour further and bridge the fields of granular matter and materials science, we simulated mono-disperse spheres confined in cylindrical containers to study their structural dynamics during vibration. By applying adequate vibration, disorder-to-order transitions were induced. Such transitions were characterised at the particle scale through bond orientation order parameters. As a result, emergent crystallisation was indicated by the enhancement of the local order of individual particles and the number of ordered particles. The observed heterogeneous crystallisation was characterised by the evolution of the spatial distributions via coarse-graining the order index. Crystalline regimes epitaxially grew from templates formed near the container walls during vibration, here termed the wall effect. By varying the geometrical dimensions of cylindrical containers, the obtained crystallised structures were found to differ at the cylindrical wall zone and the planar bottom wall zone. The formed packing structures were quantitatively compared to X-ray tomography results using again these order parameters. The findings here provide a microscopic perspective for developing laws governing structural dynamics in granular matter.
△ Less
Submitted 20 May, 2018;
originally announced May 2018.
-
Modelling imbibition processes in heterogeneous porous media
Authors:
Si Suo,
Mingchao Liu,
Yixiang Gan
Abstract:
Imbibition is a commonly encountered multiphase problem in various fields, and exact prediction of imbibition processes is a key issue for better understanding capillary flow in heterogeneous porous media. In this work, a numerical framework for describing imbibition processes in porous media with material heterogeneity is proposed to track the moving wetting front with the help of a partially sat…
▽ More
Imbibition is a commonly encountered multiphase problem in various fields, and exact prediction of imbibition processes is a key issue for better understanding capillary flow in heterogeneous porous media. In this work, a numerical framework for describing imbibition processes in porous media with material heterogeneity is proposed to track the moving wetting front with the help of a partially saturated region at the front vicinity. A new interface treatment, named the interface integral method, is developed here, combined with which the proposed numerical model provides a complete framework for imbibition problems. After validation of the current model with existing experimental results of one-dimensional imbibition, simulations on a series of two-dimensional cases are analysed with the presences of multiple porous phases. The simulations presented here not only demonstrate the suitability of the numerical framework on complex domains but also present its feasibility and potential for further engineering applications involving imbibition in heterogeneous media.
△ Less
Submitted 20 May, 2018;
originally announced May 2018.
-
A Modified Smoothed Particle Hydrodynamics Approach for Modelling Dynamic Contact Angle Hysteresis
Authors:
Yanyao Bao,
Ling Li,
Luming Shen,
Chengwang Lei,
Yixiang Gan
Abstract:
Dynamic wetting plays an important role in the physics of multiphase flow, and has significant influence on many industrial and geotechnical applications. In this work, a modified smoothed particle hydrodynamics (SPH) model is employed to simulate surface tension, contact angle, and dynamic wetting effects. The wetting and dewetting phenomena are simulated in a capillary tube, where the liquid par…
▽ More
Dynamic wetting plays an important role in the physics of multiphase flow, and has significant influence on many industrial and geotechnical applications. In this work, a modified smoothed particle hydrodynamics (SPH) model is employed to simulate surface tension, contact angle, and dynamic wetting effects. The wetting and dewetting phenomena are simulated in a capillary tube, where the liquid particles are raised or withdrawn by a shifting substrate. The SPH model is modified by introducing a newly-developed viscous force formulation at liquid-solid interface to reproduce the rate-dependent behaviour of moving contact line. Dynamic contact angle simulations with interfacial viscous force are conducted to verify the effectiveness and accuracy of this new formulation. In addition, the influence of interfacial viscous force with different magnitude on contact angle dynamics is examined by empirical power law correlations, and the derived constants suggest the dynamic contact angle changes monotonically with interfacial viscous force. The simulation results are consistent with the experimental observations and theoretical predictions, implying that the interfacial viscous force can be associated with slip length of flow and microscopic surface roughness. This work has demonstrated that the modified SPH model can successfully account for the rate-dependent effects of moving contact line, and can be used for realistic multiphase flow simulation under dynamic conditions.
△ Less
Submitted 8 April, 2018;
originally announced April 2018.
-
Dynamics of Viscous Entrapped Saturated Zones in Partially Wetted Porous Media
Authors:
Shuoqi Li,
Mingchao Liu,
Dorian Hanaor,
Yixiang Gan
Abstract:
As a typical multiphase fluid flow process, drainage in porous media is of fundamental interest in nature and industrial applications. During drainage processes in unsaturated soils and porous media in general, saturated clusters, in which a liquid phase fully occupies the pore space between solid grains, affect the relative permeability and effective stress of the system. In this study, we experi…
▽ More
As a typical multiphase fluid flow process, drainage in porous media is of fundamental interest in nature and industrial applications. During drainage processes in unsaturated soils and porous media in general, saturated clusters, in which a liquid phase fully occupies the pore space between solid grains, affect the relative permeability and effective stress of the system. In this study, we experimentally studied drainage processes in unsaturated granular media as a model porous system. The distribution of saturated clusters is analysed by an optical imaging method under different drainage conditions, in which pore-scale information from Voronoi and Delaunay tessellation was used to characterise the topology of saturated cluster distributions. By employing statistical analyses, the observed spatial and temporal information of multiphase flow and fluid entrapment in porous media are described. The results indicate that the distributions of both the crystallised cell size and pore size are positively correlated to the spatial and temporal distribution of saturated cluster sizes. The saturated cluster size is found to follow a lognormal distribution, in which the generalised Bond number correlates negatively to the scale parameter and positively to the shape parameter. These findings can be used to connect pore-scale behaviour with overall hydro-mechanical characteristics in partially saturated porous media, using both the degree of saturation and generalised Bond number.
△ Less
Submitted 20 February, 2018;
originally announced February 2018.
-
Stress-dependent electrical transport and its universal scaling in granular materials
Authors:
Chongpu Zhai,
Dorian Hanaor,
Gwénaëlle Proust,
Yixiang Gan
Abstract:
We experimentally and numerically examine stress-dependent electrical transport in granular materials to elucidate the origins of their universal dielectric response. The ac responses of granular systems under varied compressive loadings consistently exhibit a transition from a resistive plateau at low frequencies to a state of nearly constant loss at high frequencies. By using characteristic freq…
▽ More
We experimentally and numerically examine stress-dependent electrical transport in granular materials to elucidate the origins of their universal dielectric response. The ac responses of granular systems under varied compressive loadings consistently exhibit a transition from a resistive plateau at low frequencies to a state of nearly constant loss at high frequencies. By using characteristic frequencies corresponding to the onset of conductance dispersion and measured direct-current resistance as scaling parameters to normalize the measured impedance, results of the spectra under different stress states collapse onto a single master curve, revealing well-defined stress-independent universality. In order to model this electrical transport, a contact network is constructed on the basis of prescribed packing structures, which is then used to establish a resistor-capacitor network by considering interactions between individual particles. In this model the frequency-dependent network response meaningfully reproduces the experimentally observed master curve exhibited by granular materials under various normal stress levels indicating this universal scaling behaviour is found to be governed by i) interfacial properties between grains and ii) the network configuration. The findings suggest the necessity of considering contact morphologies and packing structures in modelling electrical responses using network-based approaches.
△ Less
Submitted 24 October, 2019; v1 submitted 16 December, 2017;
originally announced December 2017.
-
Dynamic contact angle hysteresis in liquid bridges
Authors:
Zhang Shi,
Yi Zhang,
Mingchao Liu,
Dorian A. H. Hanaor,
Yixiang Gan
Abstract:
This work presents a combined experimental and theoretical study of dynamic contact angle hysteresis using liquid bridges under cyclic compression and stretching between two identical plates. Under various loading rates, contact angle hysteresis for three different liquids was measured by examination of advancing and receding angles in liquid bridges, and the capillary forces were recorded. It is…
▽ More
This work presents a combined experimental and theoretical study of dynamic contact angle hysteresis using liquid bridges under cyclic compression and stretching between two identical plates. Under various loading rates, contact angle hysteresis for three different liquids was measured by examination of advancing and receding angles in liquid bridges, and the capillary forces were recorded. It is found that, for a given liquid, the hysteretic phenomenon of the contact angle is more pronounced at higher loading rates. By unifying the behaviour of the three liquids, power-law correlations were proposed to describe the relationship between the dynamic contact angle and the capillary number for advancing and receding cases. It is found that the exponents of obtained power-law correlations differ from those derived through earlier methods (e.g., capillary rise), due to the different kinematics of the triple-line. The various hysteretic loops of capillary force in liquid bridges under varied cyclic loading rates were also observed, which can be captured quantitatively by the prediction of our developed model incorporating the dynamic contact angle hysteresis. These results illustrate the importance of varying triple-line geometries during dynamic wetting and dewetting processes, and warrant an improved modelling approach for higher level phenomena involving these processes, e.g., multiphase flow in porous media and liquid transfer between surfaces with moving contact lines.
△ Less
Submitted 13 December, 2017;
originally announced December 2017.
-
Scavenging of oxygen vacancies at modulation-doped oxide interfaces: Evidence from oxygen isotope tracing
Authors:
Y. Z. Chen,
M. Döbeli,
E. Pomjakushina,
Y. L. Gan,
N. Pryds,
T. Lippert
Abstract:
The introduction of manganite buffer layers, La7/8Sr1/8MnO3 (LSMO) in particular, at the metallic interface between SrTiO3 (STO) and another band insulator suppresses the carrier density of the interfacial two-dimensional electron gas (2DEG) and improves significantly the electron mobility. However, the mechanisms underlying the extreme mobility enhancement remain elusive. Herein, we used 18O isot…
▽ More
The introduction of manganite buffer layers, La7/8Sr1/8MnO3 (LSMO) in particular, at the metallic interface between SrTiO3 (STO) and another band insulator suppresses the carrier density of the interfacial two-dimensional electron gas (2DEG) and improves significantly the electron mobility. However, the mechanisms underlying the extreme mobility enhancement remain elusive. Herein, we used 18O isotope exchanged SrTi18O3 as substrates to create 2DEG at room temperature with and without the LSMO buffer layer. By mapping the oxygen profile across the interface between STO18 and disordered LaAlO3 or yttria-stabilized zirconia (YSZ), we provide unambiguous evidence that redox reactions occur at oxide interfaces even grown at room temperature. Moreover, the manganite buffer layer not only suppresses the carrier density but also strongly suppresses the oxygen exchange dynamics of the STO substrate, which likely prevents the reduction of STO during the formation of the 2DEG. The underlying mechanism on the enhanced electron mobility at buffered oxide interfaces is also discussed.
△ Less
Submitted 23 October, 2017;
originally announced October 2017.
-
Giant tunability of the two-dimensional electron gas at the interface of gamma-Al2O3/SrTiO3
Authors:
W. Niu,
Y. Zhang,
Y. L. Gan,
D. V. Christensen,
M. V. Soosten,
E. J. Garcia-Suarez,
a. Riisager,
X. Wang,
Y. B. Xu,
R. Zhang,
N. Pryds,
Y. Z. Chen
Abstract:
Herein, we reported giant tunability of the physical properties of 2DEGs at the spinel/perovskite interface of γ-Al2O3/SrTiO3 (GAO/STO). By modulating the carrier density thus the band filling with ionic-liquid gating, the system experiences a Lifshitz transition at a critical carrier density of 3E13 cm-2, where a remarkably strong enhancement of Rashba spin-orbit interaction and an emergence of K…
▽ More
Herein, we reported giant tunability of the physical properties of 2DEGs at the spinel/perovskite interface of γ-Al2O3/SrTiO3 (GAO/STO). By modulating the carrier density thus the band filling with ionic-liquid gating, the system experiences a Lifshitz transition at a critical carrier density of 3E13 cm-2, where a remarkably strong enhancement of Rashba spin-orbit interaction and an emergence of Kondo effect at low temperatures are observed. Moreover, as the carrier concentration depletes with decreasing gating voltage, the electron mobility is enhanced by more than 6 times in magnitude, leading to the observation of clear quantum oscillations. The great tunability of GAO/STO interface by EDLT gating not only shows promise for design of oxide devices with on-demand properties, but also sheds new light on the electronic structure of 2DEG at the non-isostructural spinel/perovskite interface.
△ Less
Submitted 23 October, 2017;
originally announced October 2017.
-
Suppression of the antiferromagnetic order when approaching the superconducting state in a phase-separated crystal of K$_x$Fe$_{2-y}$Se$_2$
Authors:
Shichao Li,
Yuan Gan,
Jinghui Wang,
Ruidan Zhong,
J. A. Schneeloch,
Zhijun Xu,
Wei Tian,
M. B. Stone,
Songxue Chi,
M. Matsuda,
Y. Sidis,
Ph. Bourges,
Qiang Li,
Genda Gu,
J. M. Tranquada,
Guangyong Xu,
R. J. Birgeneau,
Jinsheng Wen
Abstract:
We have combined elastic and inelastic neutron scattering techniques, magnetic susceptibility and resistivity measurements to study single-crystal samples of K$_x$Fe$_{2-y}$Se$_2$, which contain the superconducting phase that has a transition temperature of $\sim$31 K. In the inelastic neutron scattering measurements, we observe both the spin-wave excitations resulting from the block antiferromagn…
▽ More
We have combined elastic and inelastic neutron scattering techniques, magnetic susceptibility and resistivity measurements to study single-crystal samples of K$_x$Fe$_{2-y}$Se$_2$, which contain the superconducting phase that has a transition temperature of $\sim$31 K. In the inelastic neutron scattering measurements, we observe both the spin-wave excitations resulting from the block antiferromagnetic ordered phase and the resonance that is associated with the superconductivity in the superconducting phase, demonstrating the coexistence of these two orders. From the temperature dependence of the intensity of the magnetic Bragg peaks, we find that well before entering the superconducting state, the development of the magnetic order is interrupted, at $\sim$42 K. We consider this result to be evidence for the physical separation of the antiferromagnetic and superconducting phases; the suppression is possibly due to the proximity effect of the superconducting fluctuations on the antiferromagnetic order.
△ Less
Submitted 30 August, 2017;
originally announced August 2017.
-
Suppressed carrier density for the patterned high mobility two-dimensional electron gas at gamma-Al2O3/SrTiO3 heterointerfaces
Authors:
W. Niu,
Y. L. Gan,
Y. Zhang,
D. V. Christensen,
M. von Soosten,
X. F. Wang,
Y. B. Xu,
R. Zhang,
N. Pryds,
Y. Z. Chen
Abstract:
The two-dimensional electron gas (2DEG) at the non-isostructural interface between spinel gamma-Al2O3 and perovskite SrTiO3 is featured by a record electron mobility among complex oxide interfaces in addition to a high carrier density up to the order of 1E15 cm-2. Herein, we report on the patterning of 2DEG at the gamma-Al2O3/SrTiO3 interface grown at 650 °C by pulsed laser deposition using a hard…
▽ More
The two-dimensional electron gas (2DEG) at the non-isostructural interface between spinel gamma-Al2O3 and perovskite SrTiO3 is featured by a record electron mobility among complex oxide interfaces in addition to a high carrier density up to the order of 1E15 cm-2. Herein, we report on the patterning of 2DEG at the gamma-Al2O3/SrTiO3 interface grown at 650 °C by pulsed laser deposition using a hard mask of LaMnO3. The patterned 2DEG exhibits a critical thickness of 2 unit cells of gamma-Al2O3 for the occurrence of interface conductivity, similar to the unpatterned sample. However, its maximum carrier density is found to be approximately 3E13 cm-2, much lower than that of the unpatterned sample (1E15 cm-2). Remarkably, a high electron mobility of approximately 3,600 cm2V-1s-1 was obtained at low temperatures for the patterned 2DEG at a carrier density of 7E12 cm-2, which exhibits clear Shubnikov-de Hass quantum oscillations. The patterned high-mobility 2DEG at the gamma-Al2O3/SrTiO3 interface paves the way for the design and application of spinel/perovskite interfaces for high-mobility all-oxide electronic devices.
△ Less
Submitted 28 June, 2017;
originally announced June 2017.