-
Anisotropic Frictional Response of Texture Induced Strained Graphene
Authors:
Andrea Mescola,
Guido Paolicelli,
Roberto Guarino,
James G. McHugh,
Sean P. Ogilvie,
Alberto Rota,
Enrico Gnecco,
Erica Iacob,
Sergio Valeri,
Nicola M. Pugno,
Venkata Gadhamshetty,
Muhammad M. Rahman,
Pulickel M. Ajayan,
Alan B. Dalton,
Manoj Tripathi
Abstract:
Friction-induced energy dissipation impedes the performance of nanoscale devices during their relative motion. Nevertheless, an ingeniously designed structure which utilizes graphene topping can tune the friction force signal by inducing local strain. The present work reports capping of graphene over Si grooved surfaces of different pitch lengths from sub-nanoscale (P=40 nm) to a quarter of a micr…
▽ More
Friction-induced energy dissipation impedes the performance of nanoscale devices during their relative motion. Nevertheless, an ingeniously designed structure which utilizes graphene topping can tune the friction force signal by inducing local strain. The present work reports capping of graphene over Si grooved surfaces of different pitch lengths from sub-nanoscale (P=40 nm) to a quarter of a micron (P= 250 nm). The variation in the pitch lengths induces different strains in graphene revealed by scanning probe techniques, Raman spectroscopy and molecular dynamics (MD) simulation. The asymmetric straining of C-C bonds over the groove architecture is exploited through friction force microscopy in different directions of orthogonal and parallel to groove axis. The presence of graphene lubricates the textured surface by a factor of 10 and periodically dissipated friction force, which was found to be stochastic over the bare surface. For the first time, we presented transformation of the lubrication into an ultra-low friction force by a factor of 20 over the crest scanning parallel to the groove axis. Such anisotropy is found to be insignificant at the bare textured system, clearly demonstrating the strain-dependent regulation of friction force. Our results are applicable for graphene, and other 2D materials covered corrugated structures with movable components such as NEMS, nanoscale gears and robotics.
△ Less
Submitted 7 May, 2021;
originally announced May 2021.
-
Large-area fabrication of low- and high-spatial-frequency laser-induced periodic surface structures on carbon fibers
Authors:
Clemens Kunz,
Tobias N. Büttner,
Björn Naumann,
Anne V. Boehm,
Enrico Gnecco,
Jörn Bonse,
Christof Neumann,
Andrey Turchanin,
Frank A. Müller,
Stephan Gräf
Abstract:
The formation and properties of laser-induced periodic surface structures (LIPSS) were investigated on carbon fibers under irradiation of fs-laser pulses characterized by a pulse duration $τ$ = 300 fs and a laser wavelength $λ$ = 1025 nm. The LIPSS were fabricated in an air environment at normal incidence with different values of the laser peak fluence and number of pulses per spot. The morphology…
▽ More
The formation and properties of laser-induced periodic surface structures (LIPSS) were investigated on carbon fibers under irradiation of fs-laser pulses characterized by a pulse duration $τ$ = 300 fs and a laser wavelength $λ$ = 1025 nm. The LIPSS were fabricated in an air environment at normal incidence with different values of the laser peak fluence and number of pulses per spot. The morphology of the generated structures was characterized by using scanning electron microscopy, atomic force microscopy and Fast-Fourier transform analyses. Moreover, the material structure and the surface chemistry of the carbon fibers before and after laser irradiation was analyzed by micro Raman spectroscopy and X-ray photoelectron spectroscopy. Large areas in the cm$^{2}$ range of carbon fiber arrangements were successfully processed with homogenously distributed high- and low-spatial frequency LIPSS. Beyond those distinct nanostructures, hybrid structures were realized for the very first time by a superposition of both types of LIPSS in a two-step process. The findings facilitate the fabrication of tailored LIPSS-based surface structures on carbon fibers that could be of particular interest for e.g. fiber reinforced polymers and concretes.
△ Less
Submitted 4 May, 2018;
originally announced May 2018.
-
Conformation And Mechanical Response of Spray Deposited Single Strand DNA on Gold
Authors:
Remy Pawlak,
J. G. Vilhena,
Antoine Hinaut,
Tobias Meier,
Thilo Glatzel,
Alexis Baratoff,
Fernando Moreno-Herrero,
Enrico Gnecco,
Ruben Perez,
Ernst Meyer
Abstract:
Single molecule force spectroscopy of DNA strands adsorbed at surfaces is a powerful technique used in air or liquid environments to quantify their mechanical properties. Although the force responses are limited to unfolding events so far, single base detection might be possible in more drastic cleanliness conditions such as ultra high vacuum. Here, we report on high resolution imaging and pulling…
▽ More
Single molecule force spectroscopy of DNA strands adsorbed at surfaces is a powerful technique used in air or liquid environments to quantify their mechanical properties. Although the force responses are limited to unfolding events so far, single base detection might be possible in more drastic cleanliness conditions such as ultra high vacuum. Here, we report on high resolution imaging and pulling attempts at low temperature (5K) of a single strand DNA (ssDNA) molecules composed of 20 cytosine bases adsorbed on Au(111) by scanning probe microscopy and numerical calculations. Using electrospray deposition technique, the ssDNA were successfully transferred from solution onto a surface kept in ultra high vacuum. Real space characterizations reveal that the ssDNA have an amorphous structure on gold in agreement with numerical calculations. Subsequent substrate annealing promotes the desorption of solvent molecules, DNA as individual molecules as well as the formation of DNA self assemblies. Furthermore, pulling experiments by force spectroscopy have been conducted to measure the mechanical response of the ssDNA while detaching. A periodic pattern of 0.2 to 0.3nm is observed in the force curve which arises from the stick slip of single nucleotide bases over the gold. Although an intra molecular response is obtained in the force curve, a clear distinction of each nucleotide detachment is not possible due the complex structure of ssDNA adsorbed on gold.
△ Less
Submitted 5 April, 2018; v1 submitted 10 September, 2017;
originally announced September 2017.
-
Superlubricity of Graphene Nanoribbons on Gold Surfaces
Authors:
Shigeki Kawai,
Andrea Benassi,
Enrico Gnecco,
Hajo Soede,
Remy Pawlak,
Xinliang Feng,
Klaus Muellen,
Daniele Passerone,
Carlo A. Pignedoli,
Pascal Ruffieux,
Roman Fasel,
Ernst Meyer
Abstract:
The state of vanishing friction known as superlubricity has important applications for energy saving and increasing the lifetime of devices. Superlubricity detected with atomic force microscopy appears in examples like sliding large graphite flakes or gold nanoclusters across surfaces. However, the origin of the behavior is poorly understood due to the lack of a controllable nano-contact. We demon…
▽ More
The state of vanishing friction known as superlubricity has important applications for energy saving and increasing the lifetime of devices. Superlubricity detected with atomic force microscopy appears in examples like sliding large graphite flakes or gold nanoclusters across surfaces. However, the origin of the behavior is poorly understood due to the lack of a controllable nano-contact. We demonstrate graphene nanoribbons superlubricity when sliding on gold with a joint experimental and computational approach. The atomically well-defined contact allows us to trace the origin of superlubricity, unravelling the role played by edges, surface reconstruction and ribbon elasticity. Our results pave the way to the scale-up of superlubricity toward the realization of frictionless coatings.
△ Less
Submitted 13 March, 2016;
originally announced March 2016.
-
Lateral vibration effects in atomic-scale friction
Authors:
R. Roth,
O. Y. Fajardo,
J. J. Mazo,
E. Meyer,
E. Gnecco
Abstract:
The influence of lateral vibrations on the stick-slip motion of a nanotip elastically pulled on a flat crystal surface is studied by atomic force microscopy (AFM) measurements on a NaCl(001) surface in ultra-high vacuum. The slippage of the nanotip across the crystal lattice is anticipated at increasing driving amplitude, similarly to what is observed in presence of normal vibrations. This lowers…
▽ More
The influence of lateral vibrations on the stick-slip motion of a nanotip elastically pulled on a flat crystal surface is studied by atomic force microscopy (AFM) measurements on a NaCl(001) surface in ultra-high vacuum. The slippage of the nanotip across the crystal lattice is anticipated at increasing driving amplitude, similarly to what is observed in presence of normal vibrations. This lowers the average friction force, as explained by the Prandtl-Tomlinson model with lateral vibrations superimposed at finite temperature. Nevertheless, the peak values of the lateral force, and the total energy losses, are expected to increase with the excitation amplitude, which may limit the practical relevance of this effect.
△ Less
Submitted 14 February, 2014;
originally announced February 2014.
-
Out-of-plane and in-plane actuation effects on atomic-scale friction
Authors:
O. Y. Fajardo,
E. Gnecco,
J. J. Mazo
Abstract:
The influence of out-of-plane and in-plane contact vibrations and temperature on the friction force acting on a sharp tip elastically pulled on a crystal surface is studied using a generalized Prandtl- Tomlinson model. The average friction force is significantly lowered in a frequency range determined by the "washboard" frequency of the stick-slip motion and the viscous damping accompanying the ti…
▽ More
The influence of out-of-plane and in-plane contact vibrations and temperature on the friction force acting on a sharp tip elastically pulled on a crystal surface is studied using a generalized Prandtl- Tomlinson model. The average friction force is significantly lowered in a frequency range determined by the "washboard" frequency of the stick-slip motion and the viscous damping accompanying the tip motion. An approximately linear relation between the actuation amplitude and the effective corrugation of the surface potential is derived in the case of in-plane actuation, extending a similar conclusion for out-of-plane actuation. Temperature causes an additional friction reduction with a scaling relation in formal agreement with the predictions of reaction rate theory in absence of contact vibrations. In this case the actuation effects can be described by the effective energy or, more accurately, by introducing an effective temperature.
△ Less
Submitted 14 February, 2014;
originally announced February 2014.
