-
The Collective Snapping of a Pair of Bumping Buckled Beams
Authors:
Lennard J. Kwakernaak,
Arman Guerra,
Douglas P. Holmes,
Martin van Hecke
Abstract:
When a pair of parallel buckling beams of unequal width make lateral contact under increasing compression, eventually either the thin or the thick beam will snap, leading to collective motion of the beam pair. Using experiments and FEM simulations, we find that the distance $D$ between the beams selects which beam snaps first, and that the critical distance $D^*$ scales linear with the combined wi…
▽ More
When a pair of parallel buckling beams of unequal width make lateral contact under increasing compression, eventually either the thin or the thick beam will snap, leading to collective motion of the beam pair. Using experiments and FEM simulations, we find that the distance $D$ between the beams selects which beam snaps first, and that the critical distance $D^*$ scales linear with the combined width of the two beams. To understand this behavior, we show that the collective motion of the beams is governed by a pitchfork bifurcation that occurs at strains just below snapping. Specifically, we use a model of two coupled Bellini trusses to find a closed form expression for the location of this pitchfork bifurcation that captures the linear scaling of $D^*$ with beam width. Our work uncovers a novel elastic instability that combines buckling, snapping and contact nonlinearities. This instability underlies the packing of parallel confined beams, and can be leveraged in advanced metamaterials.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
Non-Einsteinian Viscosity Reduction in Boron Nitride Nanotube Nanofluids
Authors:
André Guerra,
Adam McElligott,
Chong Yang Du,
Milan Marić,
Alejandro D. Rey,
Phillip Servio
Abstract:
(1) Introduction: Nanoparticles have multiple applications, including drug delivery systems, biosensing, and carbon capture. Non-Einstein-like viscosity reduction has been reported in nanoparticle-polymer blends at low nanoparticle concentrations. More recently, a similar non-Einsteinian viscosity reduction effect has been observed in aqueous ultra-low concentration carbon-based nanofluids. (2) Me…
▽ More
(1) Introduction: Nanoparticles have multiple applications, including drug delivery systems, biosensing, and carbon capture. Non-Einstein-like viscosity reduction has been reported in nanoparticle-polymer blends at low nanoparticle concentrations. More recently, a similar non-Einsteinian viscosity reduction effect has been observed in aqueous ultra-low concentration carbon-based nanofluids. (2) Methods: We use a boron nitride nanotube functionalized with hydrophilic groups in rheological experiments to investigate the viscosity reduction in ultra-low concentration nanofluids (0.1-10 ppm). We measure the dynamic viscosity in an air atmosphere and methane (0-5 MPag) at low temperatures (0-10 C). (3) Results: A negligible effect on the temperature dependence of viscosity was found. Ultra-low concentrations of BNNT reduced the viscosity of the nanofluid by up to 29% at 10 ppm in the presence of methane. The results presented here were compared to similar studies on O-GNF and O-MWCNT nanofluids, which also reported significant viscosity reductions. (4) Conclusions: This work identified a non-Einsteinian viscosity reduction in BNNT nanofluids, which was exacerbated by methane dissolved in the nanofluid.
△ Less
Submitted 1 September, 2023;
originally announced September 2023.
-
Effects of Poly(styrene/pentafluorostyrene-block-vinylpyrrolidone) Amphiphilic Kinetic Hydrate Inhibitors on the Dynamic Viscosity of Methane Hydrate Systems at High-Pressure Driving Forces
Authors:
Chong Yang Du,
André Guerra,
Adam McElligott,
Milan Marić,
Phillip Servio
Abstract:
Reversible addition-fragmentation chain-transfer polymerization with a switchable chain-transfer agent was employed to synthesize amphiphilic block copolymers poly(styrene-b-vinylpyrrolidone) and poly(pentafluorostyrene-b-vinylpyrrolidone) at 10 wt.% hydrophobic content as kinetic hydrate inhibitors for methane hydrates. The dynamic viscosity of methane hydrate slurries was measured in a high-pres…
▽ More
Reversible addition-fragmentation chain-transfer polymerization with a switchable chain-transfer agent was employed to synthesize amphiphilic block copolymers poly(styrene-b-vinylpyrrolidone) and poly(pentafluorostyrene-b-vinylpyrrolidone) at 10 wt.% hydrophobic content as kinetic hydrate inhibitors for methane hydrates. The dynamic viscosity of methane hydrate slurries was measured in a high-pressure rheometer up to 15 MPag. At 700 ppm of additives in aqueous media, the relative time for slurries to grow to 200 mPa s was 2.2-2.4 times longer than water reference values for the block copolymers. In contrast, it was only 1.3 for the poly(vinylpyrrolidone) homopolymer, demonstrating a reduced tendency for hydrate particle adhesion in block copolymer solutions. By increasing the concentration to 7000 ppm, however, the relative time only increased to 2.6-2.7. On the other hand, a block copolymer with 5 wt.% poly(pentafluorostyrene) block at 7000 ppm reached 3.5, which may indicate that the optimal hydrophobic content differs for each amphiphilic polymer and depends on monomer selection. No significant effect of polymer aggregation on hydrate growth was observed for the copolymers used in this study, which had the same hydrophobic percentage and molecular weights between 10,000 and 40,000 g/mol.
△ Less
Submitted 1 April, 2023;
originally announced April 2023.
-
Effects of Poly(vinylpyrrolidone) on the Dynamic Viscosity of Methane Hydrate Systems at High-Pressure Driving Forces: Investigation of Concentration, Molecular Weight, and Shear Rate
Authors:
Chong Yang Du,
André Guerra,
Adam McElligott,
Milan Marić,
Alejandro D. Rey,
Phillip Servio
Abstract:
The viscosity of methane hydrate slurries with poly(vinylpyrrolidone) (PVP) at 700 and 7000 ppm by weight, molecular weights of 40,000 (PVP40) and 360,000 (PVP360) Da, and shear rates of 400 and 80 1/s, were measured in a high-pressure rheometer with pressures up to 30 MPag and compared to pure water systems. The additives successfully reduced the formation of high-viscosity slurries, but at low c…
▽ More
The viscosity of methane hydrate slurries with poly(vinylpyrrolidone) (PVP) at 700 and 7000 ppm by weight, molecular weights of 40,000 (PVP40) and 360,000 (PVP360) Da, and shear rates of 400 and 80 1/s, were measured in a high-pressure rheometer with pressures up to 30 MPag and compared to pure water systems. The additives successfully reduced the formation of high-viscosity slurries, but at low concentrations were incapable of delaying hydrate agglomeration at the late growth stage. The average relative time required for PVP40 solutions at 700 ppm to grow to 50 mPa.s was 1.9 times the water reference value, but only 1.2 times to reach 200 mPa.s. Improved inhibition was observed for the higher concentration and higher molecular weight sets, where the relative time to reach 50 mPa.s were 8.2 and 2.6 times the water reference value, respectively. While the additives demonstrated anti-nucleation properties and suppressed crystal growth initially, they accelerated the hydrate clusters agglomeration rate, and potentially weakened the hydrate mechanical properties.
△ Less
Submitted 23 February, 2023;
originally announced February 2023.
-
Self-Ordering of Buckling, Bending, Bumping Beams
Authors:
Arman Guerra,
Anja Slim,
Douglas P. Holmes,
Ousmane Kodio
Abstract:
A collection of thin structures buckle, bend, and bump into each-other when confined. This contact can lead to the formation of patterns: hair will self-organize in curls; DNA strands will layer into cell nuclei; paper, when crumpled, will fold in on itself, forming a maze of interleaved sheets. This pattern formation changes how densely the structures can pack, as well as the mechanical propertie…
▽ More
A collection of thin structures buckle, bend, and bump into each-other when confined. This contact can lead to the formation of patterns: hair will self-organize in curls; DNA strands will layer into cell nuclei; paper, when crumpled, will fold in on itself, forming a maze of interleaved sheets. This pattern formation changes how densely the structures can pack, as well as the mechanical properties of the system. How and when these patterns form, as well as the force required to pack these structures is not currently understood. Here we study the emergence of order in a canonical example of packing in slender-structures, i.e. a system of parallel growing elastic beams. Using experiments, simulations, and simple theory from statistical mechanics, we predict the amount of growth (or, equivalently, the amount of compression) of the beams that will guarantee a global system order, which depends only on the initial geometry of the system. Furthermore, we find that the compressive stiffness and stored bending energy of this meta-material is directly proportional to the number of beams that are geometrically frustrated at any given point. We expect these results to elucidate the mechanisms leading to pattern formation in these kinds of systems, and to provide a new mechanical meta-material, with a tunable resistance to compressive force.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
Wrinkling and developable cones in centrally confined sheets
Authors:
Lucia Stein-Montalvo,
Arman Guerra,
Kanani Almeida,
Ousmane Kodio,
Douglas P. Holmes
Abstract:
Thin sheets respond to confinement by smoothly wrinkling, or by focusing stress into small, sharp regions. From engineering to biology, geology, textiles, and art, thin sheets are packed and confined in a wide variety of ways, and yet fundamental questions remain about how stresses focus and patterns form in these structures. Using experiments and molecular dynamics (MD) simulations, we probe the…
▽ More
Thin sheets respond to confinement by smoothly wrinkling, or by focusing stress into small, sharp regions. From engineering to biology, geology, textiles, and art, thin sheets are packed and confined in a wide variety of ways, and yet fundamental questions remain about how stresses focus and patterns form in these structures. Using experiments and molecular dynamics (MD) simulations, we probe the confinement response of circular sheets, flattened in their central region and quasi-statically drawn through a ring. Wrinkles develop in the outer, free region, then are replaced by a truncated cone, which forms in an abrupt transition to stress focusing. We explore how the force associated with this event, and the number of wrinkles, depend on geometry. Additional cones sequentially pattern the sheet, until axisymmetry is recovered in most geometries. The cone size is sensitive to in-plane geometry. We uncover a coarse-grained description of this geometric dependence, which diverges depending on the proximity to the asymptotic d-cone limit, where the clamp size approaches zero. This work contributes to the characterization of general confinement of thin sheets, while broadening the understanding of the d-cone, a fundamental element of stress focusing, as it appears in realistic settings.
△ Less
Submitted 12 September, 2023; v1 submitted 12 September, 2022;
originally announced September 2022.
-
Emergence of Structure in Columns of Grains and Elastic Loops
Authors:
Arman Guerra,
Douglas P. Holmes
Abstract:
It is possible to build free-standing, load-bearing structures using only rocks and loops of elastic material. We investigate how these structures emerge, and find that the necessary maximum loop spacing (the critical spacing) is a function of the frictional properties of the grains and the elasticity of the confining material. We derive a model to understand both of these relationships, which dep…
▽ More
It is possible to build free-standing, load-bearing structures using only rocks and loops of elastic material. We investigate how these structures emerge, and find that the necessary maximum loop spacing (the critical spacing) is a function of the frictional properties of the grains and the elasticity of the confining material. We derive a model to understand both of these relationships, which depends on a simplification of the behavior of the grains at the edge of a structure. We find that higher friction leads to larger stable grain-grain and grain-loop contact angles resulting in a simple function for the frictional critical spacing, which depends linearly on friction to first order. On the other hand, a higher bending rigidity enables the loops to better contain the hydrostatic pressure of the grains, which we understand using a hydroelastic scale. These findings will illuminate the stabilization of dirt by plant roots, and potentially enable the construction of simple adhesion-less structures using only granular material and fiber.
△ Less
Submitted 7 September, 2021;
originally announced September 2021.
-
Numerical Analysis of the Stub Transistor
Authors:
Alexandre B. Guerra,
Edval J. P. Santos
Abstract:
Stubbed waveguides and stub transistors are candidates for next generation electronic devices. In particular, such structures may be used in spintronics-based quantum computation, because of its ability to induce spin-polarized carriers. In this paper, we present the simulation of the conductance of the stub transistor (single and double-gated), modeled with a nearest-neighbor tight-binding Hami…
▽ More
Stubbed waveguides and stub transistors are candidates for next generation electronic devices. In particular, such structures may be used in spintronics-based quantum computation, because of its ability to induce spin-polarized carriers. In this paper, we present the simulation of the conductance of the stub transistor (single and double-gated), modeled with a nearest-neighbor tight-binding Hamiltonian. The oscillatory behavior of the channel conductance with the applied stub voltage is observed.
△ Less
Submitted 8 April, 2003;
originally announced April 2003.