-
Post-processing of real-time quantum event measurements for an optimal bandwidth
Authors:
Jens Kerski,
Hendrik Mannel,
Pia Lochner,
Eric Kleinherbers,
Annika Kurzmann,
Arne Ludwig,
Andreas D. Wieck,
Jürgen König,
Axel Lorke,
Martin Geller
Abstract:
Single electron tunneling and its transport statistics have been studied for some time using high precision charge detectors. However, this type of detection requires advanced lithography, optimized material systems and low temperatures (mK). A promising alternative, recently demonstrated, is to exploit an optical transition that is turned on or off when a tunnel event occurs. High bandwidths shou…
▽ More
Single electron tunneling and its transport statistics have been studied for some time using high precision charge detectors. However, this type of detection requires advanced lithography, optimized material systems and low temperatures (mK). A promising alternative, recently demonstrated, is to exploit an optical transition that is turned on or off when a tunnel event occurs. High bandwidths should be achievable with this approach, although this has not been adequately investigated so far. We have studied low temperature resonance fluorescence from a self-assembled quantum dot embedded in a diode structure. We detect single photons from the dot in real time and evaluate the recorded data only after the experiment, using post-processing to obtain the random telegraph signal of the electron transport. This is a significant difference from commonly used charge detectors and allows us to determine the optimal time resolution for analyzing our data. We show how this post-processing affects both the determination of tunneling rates using waiting-time distributions and statistical analysis using full-counting statistics. We also demonstrate, as an example, that we can analyze our data with bandwidths as high as 350 kHz. Using a simple model, we discuss the limiting factors for achieving the optimal bandwidth and propose how a time resolution of more than 1 MHz could be achieved.
△ Less
Submitted 14 December, 2021;
originally announced December 2021.
-
Auger and spin dynamics in a self-assembled quantum dot
Authors:
Hendrik Mannel,
Jens Kerski,
Pia Lochner,
Marcel Zöllner,
Andreas D. Wieck,
Arne Ludwig,
Axel Lorke,
Martin Geller
Abstract:
The Zeeman-split spin states of a single quantum dot can be used together with its optical trion transitions to form a spin-photon interface between a stationary (the spin) and a flying (the photon) quantum bit. Besides long coherence times of the spin state itself, the limiting decoherence mechanisms of the trion states are of central importance. We investigate here in time-resolved resonance flu…
▽ More
The Zeeman-split spin states of a single quantum dot can be used together with its optical trion transitions to form a spin-photon interface between a stationary (the spin) and a flying (the photon) quantum bit. Besides long coherence times of the spin state itself, the limiting decoherence mechanisms of the trion states are of central importance. We investigate here in time-resolved resonance fluorescence the electron and trion dynamics in a single self-assembled quantum dot in an applied magnetic field of up to $B = 10\,$T. The quantum dot is only weakly coupled to an electron reservoir with tunneling rates of about $1\,$ms$^{-1}$. Using this sample structure, we can measure, in addition to the spin-flip rate of the electron and the spin-flip Raman rate of the trion transition, the Auger recombination process, that scatters an Auger electron into the conduction band. The Auger effect destroys the radiative trion transition and leaves the quantum dot empty until an electron tunnels from the reservoir into the dot. The Auger recombination rate decreases by a factor of three from $γ_A=3\,μ$s$^{-1}$ down to $1\,μ$s$^{-1}$ in an applied magnetic field of $10\,$T in Faraday geometry. The combination of an Auger recombination event with subsequent electron tunneling from the reservoir can flip the electron spin and thus constitutes a previously unaccounted mechanism that limits spin coherence, an important resource for quantum technologies.
△ Less
Submitted 23 October, 2021;
originally announced October 2021.
-
Internal Photo Effect from a Single Quantum Emitter
Authors:
Pia Lochner,
Jens Kerski,
Annika Kurzmann,
Andreas D. Wieck,
Arne Ludwig,
Martin Geller,
Axel Lorke
Abstract:
We demonstrate by time-resolved resonance fluorescence measurements on a single self-assembled quantum dot an internal photo-effect that emits electrons from the dot by an intra-band excitation. We find a linear dependence of the optically generated emission rate on the excitation intensity and use a rate equation model to deduce the involved rates. The emission rate is tunable over several orders…
▽ More
We demonstrate by time-resolved resonance fluorescence measurements on a single self-assembled quantum dot an internal photo-effect that emits electrons from the dot by an intra-band excitation. We find a linear dependence of the optically generated emission rate on the excitation intensity and use a rate equation model to deduce the involved rates. The emission rate is tunable over several orders of magnitude by adjusting the excitation intensity. Our findings show that a process that is well known in single atom spectroscopy (i.e. photo ionization) can also be observed in the solid state. The results also quantify an important, but mostly neglected, mechanism that may fundamentally limit the coherence times in solid-state quantum optical devices.
△ Less
Submitted 21 October, 2020;
originally announced October 2020.
-
Influence of molecular beam effusion cell quality on optical and electrical properties of quantum dots and quantum wells
Authors:
G. N. Nguyen,
A. R. Korsch,
M. Schmidt,
C. Ebler,
P. A. Labud,
R. Schott,
P. Lochner,
F. Brinks,
A. D. Wieck,
A. Ludwig
Abstract:
Quantum dot heterostructures with excellent low-noise properties became possible with high purity materials recently. We present a study on molecular beam epitaxy grown quantum wells and quantum dots with a contaminated aluminum evaporation cell, which introduced a high amount of impurities, perceivable in anomalies in optical and electrical measurements. We describe a way of addressing this probl…
▽ More
Quantum dot heterostructures with excellent low-noise properties became possible with high purity materials recently. We present a study on molecular beam epitaxy grown quantum wells and quantum dots with a contaminated aluminum evaporation cell, which introduced a high amount of impurities, perceivable in anomalies in optical and electrical measurements. We describe a way of addressing this problem and find that reconditioning the aluminum cell by overheating can lead to a full recovery of the anomalies in photoluminescence and capacitance-voltage measurements, leading to excellent low noise heterostructures. Furthermore, we propose a method to sense photo-induced trap charges using capacitance-voltage spectroscopy on self-assembled quantum dots. Excitation energy-dependent ionization of defect centers leads to shifts in capacitance-voltage spectra which can be used to determine the charge density of photo-induced trap charges via 1D band structure simulations. This method can be performed on frequently used quantum dot diode structures.
△ Less
Submitted 30 September, 2020; v1 submitted 29 September, 2020;
originally announced September 2020.
-
Real-time detection of every Auger recombination in a self-assembled quantum dot
Authors:
Pia Lochner,
Annika Kurzmann,
Jens Kerski,
Philipp Stegmann,
Jürgen König,
Andreas D. Wieck,
Arne Ludwig,
Axel Lorke,
Martin Geller
Abstract:
Auger recombination is a non-radiative process, where the recombination energy of an electron-hole pair is transferred to a third charge carrier. It is a common effect in colloidal quantum dots that quenches the radiative emission with an Auger recombination time below nanoseconds. In self-assembled QDs, the Auger recombination has been observed with a much longer recombination time in the order o…
▽ More
Auger recombination is a non-radiative process, where the recombination energy of an electron-hole pair is transferred to a third charge carrier. It is a common effect in colloidal quantum dots that quenches the radiative emission with an Auger recombination time below nanoseconds. In self-assembled QDs, the Auger recombination has been observed with a much longer recombination time in the order of microseconds. Here, we use two-color laser excitation on the exciton and trion transition in resonance fluorescence on a single self-assembled quantum dot to monitor in real-time every quantum event of the Auger process. Full counting statistics on the random telegraph signal give access to the cumulants and demonstrate the tunability of the Fano factor from a Poissonian to a sub-Poissonian distribution by Auger-mediated electron emission from the dot. Therefore, the Auger process can be used to tune optically the charge carrier occupation of the dot by the incident laser intensity; independently from the electron tunneling from the reservoir by the gate voltage. Our findings are not only highly relevant for the understanding of the Auger process, it also demonstrates the perspective of the Auger effect for controlling precisely the charge state in a quantum system by optical means.
△ Less
Submitted 13 November, 2019; v1 submitted 12 November, 2019;
originally announced November 2019.