Showing 1–47 of 47 results for author: Peng, W

Atomic-scale tunable phonon transport at tailored grain boundaries

Authors: Xiaowang Wang, Chaitanya A. Gadre, Runqing Yang, Wanjuan Zou, Xing Bin, Christopher Addiego, Toshihiro Aoki, Yujie Quan, Wei-Tao Peng, Yifeng Huang, Chaojie Du, Mingjie Xu, Xingxu Yan, Ruqian Wu, Shyue Ping Ong, Bolin Liao, Penghui Cao, Xiaoqing Pan

Abstract: Manipulating thermal properties in materials has been of fundamental importance for advancing innovative technologies. Heat carriers such as phonons are impeded by breaking crystal symmetry or periodicity. Notable methods of impeding the phonon propagation include varying the density of defects, interfaces, and nanostructures, as well as changing composition. However, a robust link between the ind… ▽ More Manipulating thermal properties in materials has been of fundamental importance for advancing innovative technologies. Heat carriers such as phonons are impeded by breaking crystal symmetry or periodicity. Notable methods of impeding the phonon propagation include varying the density of defects, interfaces, and nanostructures, as well as changing composition. However, a robust link between the individual nanoscale defect structures, phonon states, and macroscopic thermal conductivity is lacking. Here we reveal from nanoscale structure-phonon mechanisms on how the grain boundary (GB) tilt and twist angles fundamentally drive the changes in atom rearrangements, exotic vibrational states, and finally macroscopic heat transport at different bicrystal strontium titanate GBs using emerging atomic resolution vibrational spectroscopy. The 10 deg and 22 deg tilt GBs exhibit reduced phonon populations by 54% and 16% compared to the bulk value, respectively, consistent with measured thermal conductivities. A tiny twist angle further introduces a fine and local tunning of thermal conductivity by introducing twist induced defects periodically embedded with the tilt induced GB defects. Our results demonstrate that varying the tilt angle coarsely modifies the phonon population along entire GB while varying the twist angle incurs a finer adjustment at periodic locations on the GB. Our study offers a systematic approach to understanding and manipulating cross GB thermal transport of arbitrary GBs predictably and precisely. △ Less

Submitted 13 May, 2024; originally announced May 2024.

From weak to strong-coupling superconductivity tuned by substrate in TiN films

Authors: Yixin Liu, Yuchuan Liu, Zulei Xu, Aobo Yu, Xiaoni Wang, Wei Peng, Yu Wu, Gang Mu, Zhi-Rong Lin

Abstract: The interplay between substrates and superconducting thin films has attracted increasing attention. Here, we report an in-depth investigation on superconducting properties of the epitaxial TiN thin films grown on three different substrates by dc reactive magnetron sputtering. The TiN films grown on (0001) sapphire exhibit (111) crystal orientation, while that grown on (100) Si and MgO substrates e… ▽ More The interplay between substrates and superconducting thin films has attracted increasing attention. Here, we report an in-depth investigation on superconducting properties of the epitaxial TiN thin films grown on three different substrates by dc reactive magnetron sputtering. The TiN films grown on (0001) sapphire exhibit (111) crystal orientation, while that grown on (100) Si and MgO substrates exhibit (100) orientation. Moreover, the samples grown on Si reveal a relatively lower level of disorder, accompanied by the higher critical transition temperature $T_c$ and smaller magnitude of upper critical field slope near $T_c$. Remarkably, we uncovered a rather high value of superconducting gap (with $Δでるた_0/k_BT_c$ = 3.05) in TiN film on Si indicating a very strong coupling superconductivity, in sharp contrast to the case using sapphires and MgO as the substrate which reveals a weak-coupling feature. The comprehensive analysis considering the scenarios of the three substrate shows that the grain size of the thin films may be an important factor influencing the superconductivity. △ Less

Submitted 25 August, 2024; v1 submitted 25 April, 2024; originally announced April 2024.

Comments: 8 pages, 6 figures

Observation of the In-plane Anomalous Hall Effect induced by Octupole in Magnetization Space

Authors: Wenzhi Peng, Zheng Liu, Haolin Pan, Peng Wang, Yulong Chen, Jiachen Zhang, Xuhao Yu, Jinhui Shen, Mingmin Yang, Qian Niu, Yang Gao, Dazhi Hou

Abstract: The Anomalous Hall Effect (AHE) manifests as a transverse voltage proportional to magnetization in ferromagnetic materials under the application of a charge current, being an indispensable tool for probing magnetism, especially in nanoscale devices. However, the AHE primarily sensitizes to out-of-plane magnetization, thereby hindering its capacity to discern the in-plane magnetization, a character… ▽ More The Anomalous Hall Effect (AHE) manifests as a transverse voltage proportional to magnetization in ferromagnetic materials under the application of a charge current, being an indispensable tool for probing magnetism, especially in nanoscale devices. However, the AHE primarily sensitizes to out-of-plane magnetization, thereby hindering its capacity to discern the in-plane magnetization, a characteristic prevalent in ferromagnetic films. Here we challenge this conventional understanding by demonstrating the in-plane magnetization-induced AHE in iron and nickel, two ubiquitous ferromagnets. This observation of the in-plane AHE is remarkable as it contradicts existing theories that forbid such phenomena in cubic crystal systems. We trace the origin of this unanticipated phenomenon to a hitherto unconsidered octupole of the anomalous Hall conductivity in the magnetization space, a mechanism we propose could enable the detection of in-plane AHE in a wide range of ferromagnetic materials. This work realizes the in-plane AHE in common ferromagnets by exploiting the anomalous Hall conductivity octupole, revealing a new physical origin of the AHE and promising to revolutionize the design of magnetic devices and sensors. △ Less

Submitted 24 February, 2024; originally announced February 2024.

Infrared Imaging of Magnetic Octupole Domains in Non-collinear Antiferromagnets

Authors: Peng Wang, Wei Xia, Jinhui Shen, Yulong Chen, Wenzhi Peng, Jiachen Zhang, Haolin Pan, Xuhao Yu, Zheng Liu, Yang Gao, Qian Niu, Zhian Xu, Hongtao Yang, Yanfeng Guo, Dazhi Hou

Abstract: Magnetic structure plays a pivotal role in the functionality of antiferromagnets (AFMs), which not only can be employed to encode digital data but also yields novel phenomena. Despite its growing significance, visualizing the antiferromagnetic domain structure remains a challenge, particularly for non-collinear AFMs. Currently, the observation of magnetic domains in non-collinear antiferromagnetic… ▽ More Magnetic structure plays a pivotal role in the functionality of antiferromagnets (AFMs), which not only can be employed to encode digital data but also yields novel phenomena. Despite its growing significance, visualizing the antiferromagnetic domain structure remains a challenge, particularly for non-collinear AFMs. Currently, the observation of magnetic domains in non-collinear antiferromagnetic materials is feasible only in Mn$_{3}$Sn, underscoring the limitations of existing techniques that necessitate distinct methods for in-plane and out-of-plane magnetic domain imaging. In this study, we present a versatile method for imaging the antiferromagnetic domain structure in a series of non-collinear antiferromagnetic materials by utilizing the anomalous Ettingshausen effect (AEE), which resolves both the magnetic octupole moments parallel and perpendicular to the sample surface. Temperature modulation due to the AEE originating from different magnetic domains is measured by the lock-in thermography, revealing distinct behaviors of octupole domains in different antiferromagnets. This work delivers an efficient technique for the visualization of magnetic domains in non-collinear AFMs, which enables comprehensive study of the magnetization process at the microscopic level and paves the way for potential advancements in applications. △ Less

Submitted 15 November, 2023; originally announced November 2023.

Comments: National Science Review in press

Superconductivity with $T_c$ up to 30.7 K in air-annealed CaFeAsF

Authors: Yixin Liu, Teng Wang, Zulei Xu, Da Jiang, Yi Zhao, Yanpeng Qi, Xiaoni Wang, Ming Yang, Mao Ye, Wei Peng, Gang Mu

Abstract: Exploring new unconventional superconductors is of great value for both fundamental research and practical applications. It is a long-term challenge to develop and study more hole-doped superconductors in 1111 system of iron-based superconductors. However, fifteen years after the discovery of iron-based superconductors, it has become increasingly difficult to discover new members in this system by… ▽ More Exploring new unconventional superconductors is of great value for both fundamental research and practical applications. It is a long-term challenge to develop and study more hole-doped superconductors in 1111 system of iron-based superconductors. However, fifteen years after the discovery of iron-based superconductors, it has become increasingly difficult to discover new members in this system by conventional means. Here we report the discovery of superconductivity with the critical transition temperature up to 30.7 K in the parent compound CaFeAsF by an annealing treatment in air atmosphere. The superconducting behaviors are verified in both the single-crystalline and polycrystalline samples by the resistance and magnetization measurements. The analysis by combining the depth-resolved time-of-flight secondary ion mass spectrometry (TOF-SIMS) and X-ray photoelectron spectroscopy (XPS) measurements show that the introduction of oxygen elements and the consequent changing in Fe valence by the annealing treatment may lead to the hole-type doping, which is the origin for the occurrence of superconductivity. Our results provide a new route to induce hole-doped superconductivity in Fe-based superconductors. △ Less

Submitted 14 November, 2023; originally announced November 2023.

Comments: 20 pages, 4 figures and 1 table

Gate-Tunable Critical Current of the Three-Dimensional Niobium Nano-Bridge Josephson Junction

Authors: Shujie Yu, Lei Chen, Yinping Pan, Yue Wang, Denghui Zhang, Guangting Wu, Xinxin Fan, Xiaoyu Liu, Ling Wu, Lu Zhang, Wei Peng, Jie Ren, Zhen Wang

Abstract: Recent studies have shown that the critical currents of several metallic superconducting nanowires and Dayem bridges can be locally tuned using a gate voltage {V_g}. Here, we report a gate-tunable Josephson junction structure constructed from a three-dimensional (3D) niobium nano-bridge junction (NBJ) with a voltage gate on top. Measurements up to 6 K showed that the critical current of this struc… ▽ More Recent studies have shown that the critical currents of several metallic superconducting nanowires and Dayem bridges can be locally tuned using a gate voltage {V_g}. Here, we report a gate-tunable Josephson junction structure constructed from a three-dimensional (3D) niobium nano-bridge junction (NBJ) with a voltage gate on top. Measurements up to 6 K showed that the critical current of this structure can be tuned to zero by increasing {V_g}. The critical gate voltage Vgc was reduced to 16 V and may possibly be reduced further by reducing the thickness of the insulation layer between the gate and the NBJ. Furthermore, the flux modulation generated by Josephson interference of two parallel 3D NBJs can also be tuned using {V_g} in a similar manner. Therefore, we believe that this gate-tunable Josephson junction structure is promising for superconducting circuit fabrication at high integration levels. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Comments: 15 pages, 5 figures

Geometric Scaling of the Current-Phase Relation of Niobium Nano-Bridge Junctions

Authors: Yue Wang, Lei Chen, Yinping Pan, Denghui Zhang, Shujie Yu, Guangting Wu, Xiaoyu Liu, Ling Wu, Weifeng Shi, Guofeng Zhang, Lu Zhang, Wei Peng, Jie Ren, Zhen Wang

Abstract: The nano-bridge junction (NBJ) is a type of Josephson junction that is advantageous for the miniaturization of superconducting circuits. However, the current-phase relation (CPR) of the NBJ usually deviates from a sinusoidal function which has been explained by a simplified model with correlation only to its effective length. Here, we investigated both measured and calculated CPRs of niobium NBJs… ▽ More The nano-bridge junction (NBJ) is a type of Josephson junction that is advantageous for the miniaturization of superconducting circuits. However, the current-phase relation (CPR) of the NBJ usually deviates from a sinusoidal function which has been explained by a simplified model with correlation only to its effective length. Here, we investigated both measured and calculated CPRs of niobium NBJs of a cuboidal shape with a three-dimensional bank structure. From a sine-wave to a saw-tooth-like form, we showed that deviated CPRs of NBJs can be described quantitatively by its skewness Δでるたθしーた. Furthermore, the measured dependency of Δでるたθしーた on the critical current {I_0} from 108 NBJs turned out to be consistent with the calculated ones derived from the change in geometric dimensions. It suggested that the CPRs of NBJs can be tuned by their geometric dimensions. In addition, the calculated scaling behavior of Δでるたθしーた versus {I_0} in three-dimensional space was provided for the future design of superconducting circuits of a high integration level by using niobium NBJs. △ Less

Submitted 2 August, 2023; originally announced August 2023.

Comments: 20 pages, 10 figures

Superconducting nanowire diode

Authors: Xiaofu Zhang, Qingchang Huan, Ruoyan Ma, Xingyu Zhang, Jia Huang, Xiaoyu Liu, Wei Peng, Hao Li, Zhen Wang, Xiaoming Xie, Lixing You

Abstract: Semiconducting diode with nonreciprocal transport effect underlies the cornerstone of contemporary integrated circuits (ICs) technology. Due to isotropic superconducting properties and the lack of breaking of inversion symmetry for conventional s-wave superconductors, such a superconducting peer is absent. Recently, a series of superconducting structures, including superconducting superlattice and… ▽ More Semiconducting diode with nonreciprocal transport effect underlies the cornerstone of contemporary integrated circuits (ICs) technology. Due to isotropic superconducting properties and the lack of breaking of inversion symmetry for conventional s-wave superconductors, such a superconducting peer is absent. Recently, a series of superconducting structures, including superconducting superlattice and quantum-material-based superconducting Josephson junction, have exhibited a superconducting diode effect in terms of polarity-dependent critical current. However, due to complex structures, these composite systems are not able to construct large-scale integrated superconducting circuits. Here, we demonstrated the minimal superconducting electric component-superconducting nanowire-based diode with a nonreciprocal transport effect under a perpendicular magnetic field, in which the superconducting to normal metallic phase transition relies on the polarity and amplitude of the bias current. Our nanowire diodes can be reliably operated nearly at all temperatures below the critical temperature, and the rectification efficiency at 2 K can be more than 24%. Moreover, the superconducting nanowire diode is able to rectify both square wave and sine wave signals without any distortion. Combining the superconducting nanowire-based diodes and transistors, superconducting nanowires hold the possibility to construct novel low-dissipation superconducting ICs. △ Less

Submitted 20 June, 2023; originally announced June 2023.

Chiral magnetism and ordering of oxygen vacancies in SrTiO$_{2.5}$

Authors: Liang Si, Xiaochao Wang, Paul Worm, Wei Peng, Minjae Kim, Lingfei Wang, Karsten Held

Abstract: Oxygen vacancies in the perovskite insulator SrTiO$_3$ free electrons that couple with other physical degrees of freedom such as lattice, orbital, and spin. This leads to the emergence of exotic quantum states such as superconductivity and unusual ferromagnetism. We perform density-functional theory and dynamical mean-field theory calculations and demonstrate that the orientation and ordering of t… ▽ More Oxygen vacancies in the perovskite insulator SrTiO$_3$ free electrons that couple with other physical degrees of freedom such as lattice, orbital, and spin. This leads to the emergence of exotic quantum states such as superconductivity and unusual ferromagnetism. We perform density-functional theory and dynamical mean-field theory calculations and demonstrate that the orientation and ordering of the TiO$_5$ pentahedra plays a crucial role. Specifically, for vacancy-rich SrTiO$_{3-δでるた}$ ($δでるた\sim$0.5), we find a chiral ordering of the TiO$_5$ pentahedra in a sixfold superlattice. This chiral structure is accompanied by a chiral magnetic state with a net moment in the (111) direction at room temperature, which can explain several experimental observations. △ Less

Submitted 12 June, 2023; originally announced June 2023.

Comments: 10 pages, 8 figures including supplementary materials

Ferroelectricity driven-resistive switching and Schottky barrier modulation at CoPt/MgZnO interface for non-volatile memories

Authors: Mohamed Belmoubarik, Muftah Al-Mahdawi, George Machado Jr., Tomohiro Nozaki, Cláudia Coelho, Masashi Sahashi, Weng Kung Peng

Abstract: Ferroelectric memristors have attracted much attention as a type of nonvolatile resistance switching memories in neuromorphic computing, image recognition, and information storage. Their resistance switching mechanisms have been studied several times in perovskite and complicated materials systems. It was interpreted as the modulation of carrier transport by polarization control over Schottky barr… ▽ More Ferroelectric memristors have attracted much attention as a type of nonvolatile resistance switching memories in neuromorphic computing, image recognition, and information storage. Their resistance switching mechanisms have been studied several times in perovskite and complicated materials systems. It was interpreted as the modulation of carrier transport by polarization control over Schottky barriers. Here, we experimentally report the isothermal resistive switching across a CoPt/MgZnO Schottky barrier using a simple binary semiconductor. The crystal and texture properties showed high-quality and single-crystal Co$_{0.30}$Pt$_{0.70}$/Mg$_{0.20}$Zn$_{0.80}$O hetero-junctions. The resistive switching was examined by an electric-field cooling method that exhibited a ferroelectric T$_C$ of MgZnO close to the bulk value. The resistive switching across CoPt/MgZnO Schottky barrier was accompanied by a change in the Schottky barrier height of 26.5 meV due to an interfacial charge increase and/or orbital hybridization induced reversal of MgZnO polarization. The magnitude of the reversed polarization was estimated to be a reasonable value of 3.0 (8.25) $μみゅー$ C/cm$^2$ at 300 K (2 K). These findings demonstrated the utilities of CoPt/MgZnO interface as a potential candidate for ferroelectric memristors and can be extended to probe the resistive switching of other hexagonal ferroelectric materials. △ Less

Submitted 1 March, 2024; v1 submitted 25 May, 2023; originally announced May 2023.

Development of 15kA/cm$^2$ Fabrication Process for Superconducting Integrated Digital Circuits

Authors: Liliang Ying, Xue Zhang, Guixiang He, Weifeng Shi, Hui Xie, Linxian Ma, Hui Zhang, Jie Ren, Wei Peng, Zhen Wang

Abstract: A new fabrication process for superconducting integrated digital circuits is reported. We have developed the "SIMIT Nb04" fabrication technique for superconducting integrated circuits with Nb-based Josephson junctions based on the validated "SIMIT Nb03" process and Chemical Mechanical Planarization (CMP) technology. Seven Nb superconducting layers and one Mo resistor layer are included in the "SIM… ▽ More A new fabrication process for superconducting integrated digital circuits is reported. We have developed the "SIMIT Nb04" fabrication technique for superconducting integrated circuits with Nb-based Josephson junctions based on the validated "SIMIT Nb03" process and Chemical Mechanical Planarization (CMP) technology. Seven Nb superconducting layers and one Mo resistor layer are included in the "SIMIT Nb04" process with 19 mask levels. The device structure is composed of active layers including junctions at the bottom, two passive transmission line (PTL) layers in the middle and a DC power layer at the top. The circuit fabrication started with the fabrication of Mo resistors with a target sheet resistance Rsh of 3 $Ωおめが$, followed by the deposition of Nb/Al-AlO$_x$/Nb trilayer Josephson-junction with a target critical current density Jc at 15 kA/cm$^2$. To increase the Al-AlO$_x$ barrier layer etching's repeatability, an additional barrier protection layer was applied. To accomplish high-quality planarization, we created a planarization procedure coupled with dummy filling. To assess the process dependability and controllability, a set of process control monitors (PCMs) for monitoring fabrication and design parameters was designed and monitored. The successful manufacturing and testing of a few small-scale circuits, like our standard library cells, further attests to the viability of our fabrication process for superconducting integrated circuits. △ Less

Submitted 17 August, 2023; v1 submitted 4 April, 2023; originally announced April 2023.

Coexistence of ferromagnetism and superconductivity at KTaO$_3$ heterointerfaces

Authors: Zhongfeng Ning, Jiahui Qian, Yixin Liu, Fan Chen, Mingzhu Zhang, Liwei Deng, Xinli Yuan, Qingqin Ge, Hua Jin, Guanqun Zhang, Wei Peng, Shan Qiao, Gang Mu, Yan Chen, Wei Li

Abstract: The coexistence of superconductivity and ferromagnetism is a long-standing issue in superconductivity due to the antagonistic nature of these two ordered states. Experimentally identifying and characterizing novel heterointerface superconductors that coexist with magnetism presents significant challenges. Here, we report the experimental observation of two-dimensional long-range ferromagnetic orde… ▽ More The coexistence of superconductivity and ferromagnetism is a long-standing issue in superconductivity due to the antagonistic nature of these two ordered states. Experimentally identifying and characterizing novel heterointerface superconductors that coexist with magnetism presents significant challenges. Here, we report the experimental observation of two-dimensional long-range ferromagnetic order in the KTaO$_3$ heterointerface superconductor, showing the coexistence of superconductivity and ferromagnetism. Remarkably, our direct current superconducting quantum interference device measurements reveal an in-plane magnetization hysteresis loop persisting above room temperature. Moreover, the first-principles calculations and X-ray magnetic circular dichroism measurements provide decisive insights into the origin of the observed robust ferromagnetism, attributing it to oxygen vacancies that localize electrons in nearby Ta 5$d$ states. Our findings not only suggest KTaO$_3$ heterointerfaces as time-reversal symmetry breaking superconductors, but also inject fresh momentum into the exploration of the intricate interplay between superconductivity and magnetism, enhanced by the strong spin-orbit coupling inherent to the heavy Ta in 5$d$ orbitals of KTaO$_3$ heterointerfaces. △ Less

Submitted 30 May, 2024; v1 submitted 3 February, 2023; originally announced February 2023.

Comments: 9 pages, 5 figures

Journal ref: Nano Letters 24, 7134 (2024)

Compositionally Complex Perovskite Oxides as a New Class of Li-Ion Solid Electrolytes

Authors: Shu-Ting Ko, Tom Lee, Ji Qi, Dawei Zhang, Wei-Tao Peng, Xin Wang, Wei-Che Tsai, Shikai Sun, Zhaokun Wang, William J. Bowman, Shyue Ping Ong, Xiaoqing Pan, Jian Luo

Abstract: Compositionally complex ceramics (CCCs), including high-entropy ceramics (HECs) as a subclass, offer new opportunities of materials discovery beyond the traditional methodology of searching new stoichiometric compounds. Herein, we establish new strategies of tailoring CCCs via a seamless combination of (1) non-equimolar compositional designs and (2) controlling microstructures and interfaces. Usin… ▽ More Compositionally complex ceramics (CCCs), including high-entropy ceramics (HECs) as a subclass, offer new opportunities of materials discovery beyond the traditional methodology of searching new stoichiometric compounds. Herein, we establish new strategies of tailoring CCCs via a seamless combination of (1) non-equimolar compositional designs and (2) controlling microstructures and interfaces. Using oxide solid electrolytes for all-solid-state batteries as an exemplar, we validate these new strategies via discovering a new class of compositionally complex perovskite oxides (CCPOs) to show the possibility of improving ionic conductivities beyond the limit of conventional doping. As an example (amongst the 28 CCPOs examined), we demonstrate that the ionic conductivity can be improved by >60% in (Li0.375Sr0.4375)(Ta0.375Nb0.375Zr0.125Hf0.125)O3-δでるた, in comparison with the state-of-art (Li0.375Sr0.4375)(Ta0.75Zr0.25)O3-δでるた (LSTZ) baseline, via maintaining comparable electrochemical stability. Furthermore, the ionic conductivity can be improved by another >70% via grain boundary (GB) engineering, achieving >270% of the LSTZ baseline. This work suggests transformative new strategies for designing and tailoring HECs and CCCs, thereby opening a new window for discovering materials for energy storage and many other applications. △ Less

Submitted 27 December, 2022; originally announced December 2022.

Robust Quantum Griffiths Singularity at above 1.5 Kelvin in Nitride Thin Films

Authors: Xiaoni Wang, Lijie Wang, Yixin Liu, Fan Chen, Wanpeng Gao, Yu Wu, Zulei Xu, Wei Peng, Zhen Wang, Zengfeng Di, Wei Li, Gang Mu, Zhirong Lin

Abstract: Quantum Griffiths singularity (QGS), which is closely correlated with the quenched disorder, is characterized by the divergence of the dynamical critical exponent and the presence of activated scaling behavior. Typically such a quantum phenomenon is rather rare and only observed in extremely low temperatures. Here we report the experimental observation of a robust QGS in nitride thin films, NbN, w… ▽ More Quantum Griffiths singularity (QGS), which is closely correlated with the quenched disorder, is characterized by the divergence of the dynamical critical exponent and the presence of activated scaling behavior. Typically such a quantum phenomenon is rather rare and only observed in extremely low temperatures. Here we report the experimental observation of a robust QGS in nitride thin films, NbN, which survives in a rather high temperature range. The electrical transport propertied were measured under the magnetic field up to 12 T. The field induced superconductor-metal transitions were observed with the continuously changed transition points with the decrease of temperature. The dynamical critical exponent based on the conventional power-law scaling reveals a divergent trend when approaching the the low temperature limit. Moreover, the temperature and field dependence of sheet resistance can be described by the activated scaling analysis in the temperature region up to 1.6 K $\leq T \leq$ 4.0 K. We argue that the robustness of QGS in the present system originates from the Pauli paramagnetic effect due to the strong coupling between the magnetic field and the spin degree of freedom. △ Less

Submitted 10 November, 2022; originally announced November 2022.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. B 107, 094509 (2023)

Investigation of the Pauli paramagnetic effect in systematically tuned NbN thin films

Authors: Xiaoni Wang, Lijie Wang, Yixin Liu, Wanpeng Gao, Yu Wu, Zulei Xu, Hua Jin, Lu Zhang, Wei Peng, Zhen Wang, Wei Li, Gang Mu, Zhirong Lin

Abstract: Superconductivity and the normal-state properties of NbN films can be tuned in a wide range, supplying a suitable platform to investigate the systematical evolution of the superconducting performances. Herein, we report the upper critical field of NbN films in both the vertical ($B\perp$ film) and parallel ($B\parallel$ film) orientations over a wide temperature range. Eight samples with the super… ▽ More Superconductivity and the normal-state properties of NbN films can be tuned in a wide range, supplying a suitable platform to investigate the systematical evolution of the superconducting performances. Herein, we report the upper critical field of NbN films in both the vertical ($B\perp$ film) and parallel ($B\parallel$ film) orientations over a wide temperature range. Eight samples with the superconducting critical temperature $T_c$ ranging from 2.5 K to 9.8 K are studied. Meanwhile, the normal-state resistivity is tuned by more than six times by changing the conditions of the film growth. It is found that the magnitudes of the upper critical field in both field directions ($B_{c2}^{\perp}$ and $B_{c2}^{\parallel}$) exceed the paramagnetic limiting field $B_p$. The temperature dependent $B_{c2}^{\perp}$ can be described by the extended Werthamer--Helfand--Hohenberg (WHH) model considering the Pauli spin paramagnetism. Meanwhile, the $B_{c2}^{\parallel}$-$T$ data shows the feature of two-dimensional superconductivity in the temperature range near $T_c$. The evolution of the obtained Maki parameter with other parameters, such as the slope of the upper critical field near $T_c$ and the normal-state resistivity, are discussed to reveal the characteristics of the Pauli paramagnetic effect in this system. △ Less

Submitted 10 November, 2022; originally announced November 2022.

Comments: 7 pages, 6 figures

Journal ref: Physica C 606, 1354223 (2023)

Flexoelectric control of a ferromagnetic metal

Authors: Wei Peng, Se Young Park, Chang Jae Roh, Junsik Mun, Hwiin Ju, Jinkwon Kim, Eun Kyo Ko, Zhengguo Liang, Sungsoo Hahn, Jinfeng Zhang, Liang Si, Yong Jin Jo, Tae Heon Kim, Changyoung Kim, Lingfei Wang, Miyoung Kim, Jong Seok Lee, Tae Won Noh, Daesu Lee

Abstract: Electric fields have played a key role in discovering and controlling exotic electronic states of condensed matter. However, electric fields usually do not work in metals as free carriers tend to screen electrostatic fields. While a pseudo-electric field generated by inhomogeneous lattice strain, namely a flexoelectric field, can in principle work in all classes of materials, it remains experiment… ▽ More Electric fields have played a key role in discovering and controlling exotic electronic states of condensed matter. However, electric fields usually do not work in metals as free carriers tend to screen electrostatic fields. While a pseudo-electric field generated by inhomogeneous lattice strain, namely a flexoelectric field, can in principle work in all classes of materials, it remains experimentally unexplored in metals. Here, using heteroepitaxy and atomic-scale imaging, we show that flexoelectric fields can polarize a metallic oxide SrRuO3 with unexpectedly large Ru off-center displacements. We also observe that the flexoelectrically induced polar state of SrRuO3 leads to sizable lattice expansion, similar to the electrostrictive expansion caused by ionic displacements in dielectrics under an external electric field. We further suggest that flexoelectrically driven Ru off-centering promotes strong coupling between lattice and electronic degrees of freedom, possibly enhancing the ferromagnetism of SrRuO3. Beyond conventional electric fields, flexoelectric fields may universally engender novel electronic states and their control via pure atomic displacements in a nondestructive and fast manner. △ Less

Submitted 7 March, 2022; originally announced March 2022.

Comments: 33 pages, 13 figures

Evidence for unconventional superconductivity in a spinel oxide

Authors: Huanyi Xue, Lijie Wang, Zhongjie Wang, Guanqun Zhang, Wei Peng, Shiwei Wu, Chunlei Gao, Zhenghua An, Yan Chen, Wei Li

Abstract: The charge frustration with the mixed-valence state inherent to LiTi$_2$O$_4$, which is found to be a unique spinel oxide superconductor, is the impetus for paying special attention to reveal the existence of intriguing superconducting properties. Here, we report a pronounced fourfold rotational symmetry of the superconductivity in high-quality single-crystalline LiTi$_2$O$_4$ (001) thin films. Bo… ▽ More The charge frustration with the mixed-valence state inherent to LiTi$_2$O$_4$, which is found to be a unique spinel oxide superconductor, is the impetus for paying special attention to reveal the existence of intriguing superconducting properties. Here, we report a pronounced fourfold rotational symmetry of the superconductivity in high-quality single-crystalline LiTi$_2$O$_4$ (001) thin films. Both the magnetoresistivity and upper critical field under an applied magnetic field manifest striking fourfold oscillations deep inside the superconducting state, whereas the anisotropy vanishes in the normal state, demonstrating that it is an intrinsic property of the superconducting phase. We attribute this behavior to the unconventional $d$-wave superconducting Cooper pairs with the irreducible representation of $E_g$ protected by $O_h$ point group in LiTi$_2$O$_4$. Our findings demonstrate the unconventional character of the pairing interaction in a three-dimensional spinel oxide superconductor and shed new light on the pairing mechanism of unconventional superconductivity. △ Less

Submitted 2 August, 2022; v1 submitted 26 October, 2021; originally announced October 2021.

Comments: 8 pages, 4 figures

Journal ref: ACS Nano 16, 19464 (2022)

Thermal Conductivity of BAs under Pressure

Authors: Songrui Hou, Bo Sun, Fei Tian, Qingan Cai, Shanming Wang, Wanyue Peng, Xi Chen, Zhifeng Ren, Chen Li, Richard Wilson

Abstract: The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three- and four-phonon scattering rates. This study reports the thermal conductivity of BA… ▽ More The thermal conductivity of boron arsenide (BAs) is believed to be influenced by phonon scattering selection rules due to its special phonon dispersion. Compression of BAs leads to significant changes in phonon dispersion, which allows for a test of first principles theories for how phonon dispersion affects three- and four-phonon scattering rates. This study reports the thermal conductivity of BAs from 0 to 30 GPa. Thermal conductivity vs. pressure of BAs is measured by time-domain thermoreflectance with a diamond anvil cell. In stark contrast to what is typical for nonmetallic crystals, BAs is observed to have a pressure independent thermal conductivity below 30 GPa. The thermal conductivity of nonmetallic crystals typically increases upon compression. The unusual pressure independence of thermal conductivity of BAs shows the important relationship between phonon dispersion properties and three- and four-phonon scattering rates. △ Less

Submitted 16 February, 2023; v1 submitted 1 October, 2021; originally announced October 2021.

Enhancement of the superconductivity and quantum metallic state in the thin film of superconducting Kagome metal KV$_3$Sb$_5$

Authors: Teng Wang, Aobo Yu, Han Zhang, Yixin Liu, Wei Li, Wei Peng, Zengfeng Di, Da Jiang, Gang Mu

Abstract: Recently V-based Kagome metal attracted intense attention due to the emergence of superconductivity in the low temperature. Here we report the fabrication and physical investigations of the high quality single-crystalline thin films of the Kagome metal KV$_3$Sb$_5$. For the sample with the thickness of about 15 nm, the temperature dependent resistance reveals a Berezinskii-Kosterlitz-Thouless (BKT… ▽ More Recently V-based Kagome metal attracted intense attention due to the emergence of superconductivity in the low temperature. Here we report the fabrication and physical investigations of the high quality single-crystalline thin films of the Kagome metal KV$_3$Sb$_5$. For the sample with the thickness of about 15 nm, the temperature dependent resistance reveals a Berezinskii-Kosterlitz-Thouless (BKT) type behavior, indicating the presence of two-dimensional superconductivity. Compared with the bulk sample, the onset transition temperature $T^{onset}_{c}$ and the out-of-plane upper critical field $H_{c2}$ are enhanced by 15\% and more than 10 times respectively. Moreover, the zero-resistance state is destroyed by a magnetic field as low as 50 Oe. Meanwhile, the temperature-independent resistance is observed in a wide field region, which is the hallmark of quantum metallic state. Our results provide evidences for the existence of unconventional superconductivity in this material. △ Less

Submitted 17 May, 2021; originally announced May 2021.

Comments: 5 pages, 4 figures

Journal ref: Supercond. Sci. Technol. 36 (2023) 125015

Large Nernst effect and field enhanced transversal ZT in ZrTe5

Authors: Wang Peipei, Cho Chang-woo, Tang Fangdong, Wang Peng, Zhang Wenjie, He Mingquan, Gu Genda, Wu Xiaosong, Shao Yonghong, Zhang Liyuan

Abstract: Thermoelectric materials can recover electrical energy from waste heat and vice versa, which are of great significance in green energy harvesting and solid state refrigerator. The thermoelectric figure of merit (zT) quantifies the energy conversion efficiency, and a large Seebeck or Nernst effect is crucial for the development of thermoelectric devices. Here we present a significantly large Nernst… ▽ More Thermoelectric materials can recover electrical energy from waste heat and vice versa, which are of great significance in green energy harvesting and solid state refrigerator. The thermoelectric figure of merit (zT) quantifies the energy conversion efficiency, and a large Seebeck or Nernst effect is crucial for the development of thermoelectric devices. Here we present a significantly large Nernst thermopower in topological semimetal ZrTe5, which is attributed to both strong Berry curvature and bipolar transport. The largest in-plane S_xy (when B//b) approaches 1900 μみゅーV/K at T=100K and B=13T, and the out-of-plane S_xz (when B//c) reaches 5000 μみゅーV/K. As a critical part of z_N T, the linearly increased in-plane S_xy and resistivity \r{ho}_yy regard to B induces an almost linear increasing transversal z_N T without saturate under high fields. The maximum z_N T of 0.12 was obtained at B=13 T and T= 120K, which significantly surmounts its longitudinal counterpart under the same condition. △ Less

Submitted 24 March, 2021; originally announced March 2021.

Comments: 17 pages, 7 figures

Journal ref: Phys. Rev. B 103, 045203 (2021)

Crystal structure and properties of iron-based spin-chain compound Ba9Fe3Se15

Authors: Jun Zhang, Alexander C. Komarek, Meiling Jin, Xiancheng Wang, Yating Jia, Jianfa Zhao, Wenmin Li, Zhiwei Hu, Wei Peng, L. H. Tjeng, Zheng Deng, Runze Yu, Shaomin Feng, Sijia Zhang, Min Liu, Yi-feng Yang, Hong-ji Lin, Chien-Te Chen, Xiaodong Li, Jinlong Zhu, Changqing Jin

Abstract: We report the synthesis of a new quasi one-dimensional (1D) iron selenide. Ba9Fe3Se15 was synthesized at high temperature and high pressure of 5.5 GPa and systematically studied via structural, magnetic and transport measurements at ambient and at high-pressures. Ba9Fe3Se15 crystallizes in a monoclinic structure and consists of face-sharing FeSe6 octahedral chains along the c axis. At ambient pres… ▽ More We report the synthesis of a new quasi one-dimensional (1D) iron selenide. Ba9Fe3Se15 was synthesized at high temperature and high pressure of 5.5 GPa and systematically studied via structural, magnetic and transport measurements at ambient and at high-pressures. Ba9Fe3Se15 crystallizes in a monoclinic structure and consists of face-sharing FeSe6 octahedral chains along the c axis. At ambient pressure it exhibits an insulating behavior with a band gap ~460 meV and undergoes a ferrimagnet-like phase transition at 14 K. Under high pressure, a complete metallization occurs at ~29 GPa, which is accompanied by a spin state crossover from high spin (HS) state to low spin (LS) state. The LS appears for pressures P >36 GPa. △ Less

Submitted 6 February, 2021; originally announced February 2021.

Journal ref: Phys. Rev. Materials 5, 054606 (2021)

Growth and atomically resolved polarization mapping of ferroelectric $Bi_2WO_6$ thin film

Authors: Jihwan Jeong, Junsik Mun, Saikat Das, Jinkwon Kim, Jeong Rae Kim, Wei Peng, Miyoung Kim, Tae Won Noh

Abstract: Aurivillius ferroelectric $Bi_2WO_6$ (BWO) encompasses a broad range of functionalities, including robust fatigue-free ferroelectricity, high photocatalytic activity, and ionic conductivity. Despite these promising characteristics, an in-depth study on the growth of BWO thin films and ferroelectric characterization, especially at the atomic scale, is still lacking. Here, we report pulsed laser dep… ▽ More Aurivillius ferroelectric $Bi_2WO_6$ (BWO) encompasses a broad range of functionalities, including robust fatigue-free ferroelectricity, high photocatalytic activity, and ionic conductivity. Despite these promising characteristics, an in-depth study on the growth of BWO thin films and ferroelectric characterization, especially at the atomic scale, is still lacking. Here, we report pulsed laser deposition (PLD) of BWO thin films on (001) $SrTiO_3$ substrates and characterization of ferroelectricity using the scanning transmission electron microscopy (STEM) and piezoresponse force microscopy (PFM) techniques. We show that the background oxygen gas pressure used during PLD growth mainly determines the phase stability of BWO films, whereas the influence of growth temperature is comparatively minor. Atomically resolved STEM study of a fully strained BWO film revealed collective in-plane polar off-centering displacement of W atoms. We estimated the spontaneous polarization value based on polar displacement mapping to be about 54 $\pm$ 4 $μみゅーC cm^{-2}$, which is in good agreement with the bulk polarization value. Furthermore, we found that pristine film is composed of type-I and type-II domains, with mutually orthogonal polar axes. Complementary PFM measurements further elucidated that the coexisting type-I and type-II domains formed a multidomain state that consisted of 90$°$ domain walls (DWs) alongside multiple head-to-head and tail-to-tail 180$°$ DWs. Application of an electrical bias led to in-plane 180$°$ polarization switching and 90$°$ polarization rotation, highlighting a unique aspect of domain switching, which is immune to substrate-induced strain. △ Less

Submitted 26 January, 2021; v1 submitted 26 January, 2021; originally announced January 2021.

Comments: This document is the Accepted Manuscript version of a Published Work that appeared in final form in ACS Applied Electronic Materials, ©American Chemical Society after peer review and technical editing by the publisher. To access the final edited and published work see: https://pubs.acs.org/doi/full/10.1021/acsaelm.1c00005 .This submission contains 34 pages

Journal ref: ACS Applied Electronic Materials, 2021

Large response of charge stripes to uniaxial stress in $\textrm{La}_{1.475}\textrm{Nd}_{0.4}\textrm{Sr}_{0.125}\textrm{Cu}\textrm{O}_{4}$

Authors: T. J. Boyle, M. Walker, A. Ruiz, E. Schierle, Z. Zhao, F. Boschini, R. Sutarto, T. D. Boyko, W. Moore, N. Tamura, F. He, E. Weschke, A. Gozar, W. Peng, A. C. Komarek, A. Damascelli, C. Schüßler-Langeheine, A. Frano, E. H. da Silva Neto, S. Blanco-Canosa

Abstract: The La-based '214' cuprates host several symmetry breaking phases including superconductivity, charge and spin order in the form of stripes, and a structural othorhombic-to-tetragonal phase transition. Therefore, these materials are an ideal system to study the effects of uniaxial stress onto the various correlations that pervade the cuprate phase diagram. We report resonant x-ray scattering exper… ▽ More The La-based '214' cuprates host several symmetry breaking phases including superconductivity, charge and spin order in the form of stripes, and a structural othorhombic-to-tetragonal phase transition. Therefore, these materials are an ideal system to study the effects of uniaxial stress onto the various correlations that pervade the cuprate phase diagram. We report resonant x-ray scattering experiments on $\textrm{La}_{1.475}\textrm{Nd}_{0.4}\textrm{Sr}_{0.125}\textrm{Cu}\textrm{O}_{4}$ (LNSCO-125) that reveal a significant response of charge stripes to uniaxial tensile-stress of $\sim$ 0.1 GPa. These effects include a reduction of the onset temperature of stripes by $\sim$ 50 K, a 29 K reduction of the low-temperature orthorhombic-to-tetragonal transition, competition between charge order and superconductivity, and a preference for stripes to form along the direction of applied stress. Altogether, we observe a dramatic response of the electronic properties of LNSCO-125 to a modest amount of uniaxial stress. △ Less

Submitted 17 December, 2020; originally announced December 2020.

Comments: 6 pages, 3 figures, Supplemental material available upon request

Journal ref: Phys. Rev. Research 3, 022004 (2021)

Development of Multi-Layer Fabrication Process for SFQ Large Scale Integrated Digital Circuits

Authors: Liliang Ying, Xue Zhang, Minghui Niu, Jie Ren, Wei Peng, Masaaki Meazawa, Zhen Wang

Abstract: We have developed a fabrication technology for the development of large-scale superconducting integrated circuits with Nb-based Josephson junctions. The standard fabrication process with 10 mask levels uses four metal layers including 3 Nb superconducting layers and a Mo resistor layer. The influence of deposition parameters on film stress, electrical properties, and surface roughness were studied… ▽ More We have developed a fabrication technology for the development of large-scale superconducting integrated circuits with Nb-based Josephson junctions. The standard fabrication process with 10 mask levels uses four metal layers including 3 Nb superconducting layers and a Mo resistor layer. The influence of deposition parameters on film stress, electrical properties, and surface roughness were studied systematically. High quality Nb, Al, Mo, and SiO2 films were successfully deposited for the subsequent fabrication of circuits. The circuit fabrication started with the fabrication of Mo resistors with a target sheet resistance Rsh of 2 Ome, followed by the deposition of Josephson-junction. The target critical current density Jc was set at 6 kA per cm2. The thicknesses and etch depths of the films were monitored during fabrication with on-wafer process-control-monitor (PCM) patterns for all the wafers. △ Less

Submitted 12 November, 2020; originally announced November 2020.

Miniaturization of the Superconducting Memory Cell via a Three-Dimensional Nb Nano-Superconducting Quantum Interference Device

Authors: Lei Chen, Lili Wu, Yue Wang, Yinping Pan, Denghui Zhang, Junwen Zeng, Xiaoyu Liu, Linxian Ma, Wei Peng, Yihua Wang, Jie Ren, Zhen Wang

Abstract: Scalable memories that can match the speeds of superconducting logic circuits have long been desired to enable a superconducting computer. A superconducting loop that includes a Josephson junction can store a flux quantum state in picoseconds. However, the requirement for the loop inductance to create a bi-state hysteresis sets a limit on the minimal area occupied by a single memory cell. Here, we… ▽ More Scalable memories that can match the speeds of superconducting logic circuits have long been desired to enable a superconducting computer. A superconducting loop that includes a Josephson junction can store a flux quantum state in picoseconds. However, the requirement for the loop inductance to create a bi-state hysteresis sets a limit on the minimal area occupied by a single memory cell. Here, we present a miniaturized superconducting memory cell based on a Three-Dimensional (3D) Nb nano-Superconducting QUantum Interference Device (nano-SQUID). The major cell area here fits within an 8*9 μみゅーm^2 rectangle with a cross-selected function for memory implementation. The cell shows periodic tunable hysteresis between two neighbouring flux quantum states produced by bias current sweeping because of the large modulation depth of the 3D nano-SQUID (~66%). Furthermore, the measured Current-Phase Relations (CPRs) of nano-SQUIDs are shown to be skewed from a sine function, as predicted by theoretical modelling. The skewness and the critical current of 3D nano-SQUIDs are linearly correlated. It is also found that the hysteresis loop size is in a linear scaling relationship with the CPR skewness using the statistics from characterisation of 26 devices. We show that the CPR skewness range of πぱい/4~3πぱい/4 is equivalent to a large loop inductance in creating a stable bi-state hysteresis for memory implementation. Therefore, the skewed CPR of 3D nano-SQUID enables further superconducting memory cell miniaturization by overcoming the inductance limitation of the loop area. △ Less

Submitted 22 July, 2020; originally announced July 2020.

Journal ref: ACS Nano 14 11002 (2020)

Image reconstruction through a multimode fiber with a simple neural network architecture

Authors: Changyan Zhu, Eng Aik Chan, You Wang, Weina Peng, Ruixiang Guo, Baile Zhang, Cesare Soci, Yidong Chong

Abstract: Multimode fibers (MMFs) have the potential to carry complex images for endoscopy and related applications, but decoding the complex speckle patterns produced by mode-mixing and modal dispersion in MMFs is a serious challenge. Several groups have recently shown that convolutional neural networks (CNNs) can be trained to perform high-fidelity MMF image reconstruction. We find that a considerably sim… ▽ More Multimode fibers (MMFs) have the potential to carry complex images for endoscopy and related applications, but decoding the complex speckle patterns produced by mode-mixing and modal dispersion in MMFs is a serious challenge. Several groups have recently shown that convolutional neural networks (CNNs) can be trained to perform high-fidelity MMF image reconstruction. We find that a considerably simpler neural network architecture, the single hidden layer dense neural network, performs at least as well as previously-used CNNs in terms of image reconstruction fidelity, and is superior in terms of training time and computing resources required. The trained networks can accurately reconstruct MMF images collected over a week after the cessation of the training set, with the dense network performing as well as the CNN over the entire period. △ Less

Submitted 1 September, 2020; v1 submitted 10 June, 2020; originally announced June 2020.

Comments: 17 pages, 10 figures

Observation of Two-dimensional Superconductivity in an Ultrathin Iron-Arsenic Superconductor

Authors: Chi Zhang, Tao Hu, Teng Wang, Yufeng Wu, Aobo Yu, Jianan Chu, Han Zhang, Hong Xiao, Wei Peng, Zengfeng Di, Shan Qiao, Gang Mu

Abstract: Two-dimensional (2D) superconductors supply important platforms for exploring new quantum physics and high-$T_c$ superconductivity. The intrinsic superconducting properties in the 2D iron-arsenic superconductors are still unknown owing to the difficulties in the preparation of ultrathin samples. Here we report the fabrication and physical investigations of the high quality single-crystalline ultra… ▽ More Two-dimensional (2D) superconductors supply important platforms for exploring new quantum physics and high-$T_c$ superconductivity. The intrinsic superconducting properties in the 2D iron-arsenic superconductors are still unknown owing to the difficulties in the preparation of ultrathin samples. Here we report the fabrication and physical investigations of the high quality single-crystalline ultrathin films of the iron-arsenic superconductor KCa$_2$Fe$_4$As$_4$F$_2$. For the sample with the thickness of 2.6$\sim$5 nm (1$\sim$2 unit cells), a sharp superconducting transition at around 30 K (onset point) is observed. Compare with the bulk material, the ultrathin sample reveals a relatively lower $T_c$, wider transition width, and broader flux liquid region under the in-plane field. Moreover, the angle dependent upper critical field follows the Tinkham model, demonstrating the two-dimensional superconductivity in ultrathin KCa$_2$Fe$_4$As$_4$F$_2$. △ Less

Submitted 5 June, 2020; originally announced June 2020.

Comments: 5 pages, 4 figures

Journal ref: 2D Mater. 8 (2021) 025024

Epitaxial growth and characterization of high quality Bi2O2Se thin films on SrTiO3 substrates by pulsed laser deposition

Authors: Yekai Song, Zhuojun Li, Hui Li, Shujie Tang, Gang Mu, Lixuan Xu, Wei Peng, Dawei Shen, Yulin Chen, Xiaoming Xie, Mianheng Jiang

Abstract: Recently, Bi2O2Se is discovered as a promising two-dimensional (2D) semiconductor for next generation electronics, due to its moderate bandgap size, high electron mobility and pronounced ambient stability. Meanwhile, it has been predicted that high quality Bi2O2Se-related heterostructures may possess exotic physical phenomena, such as piezoelectricity and topological superconductivity. Herein, we… ▽ More Recently, Bi2O2Se is discovered as a promising two-dimensional (2D) semiconductor for next generation electronics, due to its moderate bandgap size, high electron mobility and pronounced ambient stability. Meanwhile, it has been predicted that high quality Bi2O2Se-related heterostructures may possess exotic physical phenomena, such as piezoelectricity and topological superconductivity. Herein, we report the first successful heteroepitaxial growth of Bi2O2Se films on SrTiO3 substrates via pulsed laser deposition (PLD) method. Films obtained under optimal conditions show an epitaxial growth with the c axis perpendicular to the film surface and the a and b axes parallel to the substrate. The growth mode transition to three dimensional (3D) island from quasi-2D layer of the heteroepitaxial Bi2O2Se films on SrTiO3 (001) substrates is observed as prolonging deposition time of films. The maximum value of electron mobility reaches 160 cm2/V-1s-1 at room temperature in a 70nm-thick film. The thickness dependent mobility provides evidence that interface-scattering is likely to be the limiting factor for the relatively low electron mobility at low temperature, implying that the interface engineering as an effective method to tune the low temperature electron mobility. Our work suggests the epitaxial Bi2O2Se films grown by PLD are promising for both fundamental study and practical applications. △ Less

Submitted 21 July, 2019; v1 submitted 18 July, 2019; originally announced July 2019.

Comments: 18 pages, 5 figures, 1 table, supplementary information

Thermal Transport Dynamics in Active Heat Transfer Fluids (AHTF)

Authors: Wei Peng, Anirban Chandra, Pawel Keblinski, Jeffrey L. Moran

Abstract: We present results of molecular dynamics (MD) calculations of the effective thermal conductivity of nanofluids containing self-propelled nanoparticles. The translational and rotational dynamics observed in the simulations follow the behavior expected from the standard theoretical analysis of Brownian and self-propelled nanoparticles. The superposition of self-propulsion and rotational Brownian mot… ▽ More We present results of molecular dynamics (MD) calculations of the effective thermal conductivity of nanofluids containing self-propelled nanoparticles. The translational and rotational dynamics observed in the simulations follow the behavior expected from the standard theoretical analysis of Brownian and self-propelled nanoparticles. The superposition of self-propulsion and rotational Brownian motion causes the behavior of the self-propelled nanoparticles to resemble Brownian diffusion with an effective coefficient that is larger than the standard Brownian value by a factor of several thousand. As a result of the enhanced diffusion (and the convective mixing resulting from the motion), we observe a discriminable increase of the effective thermal conductivity of the solution. While the increases we observe are in the range of several percent, they are significant considering that, without propulsion, the nanofluid thermal conductivity is essentially not affected by the Brownian motion and can be understood within the effective medium theory of thermal conduction. Our results constitute a proof of concept that self-propelled particles have the potential to enhance thermal conductivity of the liquid in which they are immersed, an idea that could ultimately be implemented in a broad variety of cooling applications. △ Less

Submitted 22 February, 2021; v1 submitted 22 May, 2019; originally announced May 2019.

Single-crystal growth and extremely high H_c2 of 12442-type Fe-based superconductor KCa_2Fe_4As_4F_2

Authors: Teng Wang, Jianan Chu, Hua Jin, Jiaxin Feng, Lingling Wang, Yekai Song, Chi Zhang, Wei Li, Zhuojun Li, Tao Hu, Da Jiang, Wei Peng, Xiaosong Liu, Gang Mu

Abstract: Millimeter sized single crystals of KCa_2Fe_4As_4F_2 were grown using a self-flux method. The chemical compositions and crystal structure were characterized carefully. Superconductivity with the critical transition T_c = 33.5 K was confirmed by both the resistivity and magnetic susceptibility measurements. Moreover, the upper critical field H_c2 was studied by the resistivity measurements under di… ▽ More Millimeter sized single crystals of KCa_2Fe_4As_4F_2 were grown using a self-flux method. The chemical compositions and crystal structure were characterized carefully. Superconductivity with the critical transition T_c = 33.5 K was confirmed by both the resistivity and magnetic susceptibility measurements. Moreover, the upper critical field H_c2 was studied by the resistivity measurements under different magnetic fields. A rather steep increase for the in-plane H_c2^ab with cooling, dμみゅー_0H_c2^a/dT|T_c = -50.9 T/K, was observed, indicating an extremely high upper critical field. Possible origins for this behavior were discussed. The findings in our work is a great promotion both for understanding the physical properties and applications of 12442-type Fe-based superconductors. △ Less

Submitted 12 March, 2019; originally announced March 2019.

Comments: 5 pages, 4 figures

Journal ref: J. Phys. Chem. C 2019, 123, 13925-13929

An unlikely route to low lattice thermal conductivity: small atoms in a simple layered structure

Authors: Wanyue Peng, Guido Petretto, Gian-Marco Rignanese, Geoffroy Hautier, Alexandra Zevalkink

Abstract: In the design of materials with low lattice thermal conductivity, compounds with high density, low speed of sound, and complexity at either the atomic, nano- or microstructural level are preferred. The layered compound Mg$_3$Sb$_2$ defies these prevailing paradigms, exhibiting lattice thermal conductivity comparable to PbTe and Bi$_2$Te$_3$, despite its low density and simple structure. The excell… ▽ More In the design of materials with low lattice thermal conductivity, compounds with high density, low speed of sound, and complexity at either the atomic, nano- or microstructural level are preferred. The layered compound Mg$_3$Sb$_2$ defies these prevailing paradigms, exhibiting lattice thermal conductivity comparable to PbTe and Bi$_2$Te$_3$, despite its low density and simple structure. The excellent thermoelectric performance ($zT$ $\sim$ 1.5) in $n$-type Mg$_3$Sb$_2$ has thus far been attributed to its multi-valley conduction band, while its anomalous thermal properties have been largely overlooked. To explain the origin of the low lattice thermal conductivity of Mg$_3$Sb$_2$, we have used both experimental methods and ab initio phonon calculations to investigate trends in the elasticity, thermal expansion and anharmonicity of $A$Mg$_2Pn_2$ Zintl compounds with $A$ = Mg, Ca, Yb, and $Pn$ = Sb and Bi. Phonon calculations within the quasi-harmonic approximation reveal large mode Grüneisen parameters in Mg$_3$Sb$_2$ compared with isostructural compounds, in particular in transverse acoustic modes involving shearing of adjacent anionic layers. Measurements of the elastic moduli and sound velocity as a function of temperature using resonant ultrasound spectroscopy provide a window into the softening of the acoustic branches at high temperature, confirming their exceptionally high anharmonicity. We attribute the anomalous thermal behavior of Mg$_3$Sb$_2$ to the diminutive size of Mg, which may be too small for the octahedrally-coordinated site, leading to weak, unstable interlayer Mg-Sb bonding. This suggests more broadly that soft shear modes resulting from undersized cations provide a potential route to achieving low lattice thermal conductivity low-density, earth-abundant materials. △ Less

Submitted 4 April, 2018; originally announced April 2018.

Comments: 11 pages, 9 figures

Nonideal optical cavity structure of superconducting nanowire single photon detector

Authors: Hao Li, Weijun Zhang, Lixing You, Lu Zhang, Xiaoyan Yang, Xiaoyu Liu, Sijing Chen, Chaolin Lv, Wei Peng, Zhen Wang, Xiaoming Xie

Abstract: Optical cavity structure has been proven to be a crucial factor for obtaining high detection efficiency in superconducting nanowire single photon detector (SNSPD). Practically, complicated fabrication processes may result in a non-ideal optical cavity structure. The cross-sectional transmission electron microscope (TEM) image of SNSPD fabricated in this study shows unexpected arc-shaped optical ca… ▽ More Optical cavity structure has been proven to be a crucial factor for obtaining high detection efficiency in superconducting nanowire single photon detector (SNSPD). Practically, complicated fabrication processes may result in a non-ideal optical cavity structure. The cross-sectional transmission electron microscope (TEM) image of SNSPD fabricated in this study shows unexpected arc-shaped optical cavities which could have originated due to the over-etching of SiO2 layer while defining NbN nanowire. The effects of the arc-shaped optical cavity structure, such as the wavelength dependence of the optical absorption efficiency for different polarization, were analyzed by performing optical simulations using finite-difference time-domain method. The central wavelength of the device is found to exhibit a blue shift owing to the arced cavity structure. This effect is equivalent to the flat cavity with a reduced height. The results may give interesting reference for SNSPD design and fabrication. △ Less

Submitted 18 August, 2014; originally announced August 2014.

Comments: 6 pages, 5 figures

Journal ref: Selected Topics in Quantum Electronics, IEEE Journal of 20 (6), 3803705 (2014)

Superconducting nanowire single photon detector with on-chip bandpass filter

Authors: Xiaoyan Yang, Hao Li, Weijun Zhang, Lixing You, Lu Zhang, Xiaoyu Liu, Zhen Wang, Wei Peng, Xiaoming Xie, Mianheng Jiang

Abstract: Dark count rate is one of the key parameters limiting the performance of the superconducting nanowire single photon detector (SNSPD). We have designed a multi-layer film bandpass filter that can be integrated onto the SNSPD to suppress the dark counts contributed by the stray light and blackbody radiation of the fiber. The bandpass filter is composed of 16 SiO2/Si bilayers deposited onto the backs… ▽ More Dark count rate is one of the key parameters limiting the performance of the superconducting nanowire single photon detector (SNSPD). We have designed a multi-layer film bandpass filter that can be integrated onto the SNSPD to suppress the dark counts contributed by the stray light and blackbody radiation of the fiber. The bandpass filter is composed of 16 SiO2/Si bilayers deposited onto the backside of a thermally oxidized Si substrate. The substrate shows an excellent bandpass filter effect and provides a high transmittance of 88% at the central wavelength of the pass band, which is the same as that of the bare substrate. The SNSPDs fabricated on the substrate integrated with the bandpass filter show conspicuous wavelength-sensitive detection efficiency. The background dark count rate is reduced by two orders of magnitude to sub-Hz compared with the conventional SNSPD (a few tens of Hz). The detector exhibits a system detection efficiency of 56% at DCR of 1 Hzへるつ, with the measured minimal noise equivalent power reaching 2e-19 w/Hz1/2. △ Less

Submitted 26 June, 2014; originally announced June 2014.

Comments: 7 pages, 4 figures

Journal ref: Vol. 22, No. 13 OPTICS EXPRESS 16267 (2014)

Temperature-dependent Raman scattering of KTa1-xNbxO3 thin films

Authors: A. Bartasyte, J. Kreisel, W. Peng, M. Guilloux-Viry

Abstract: We report a Raman scattering investigation of KTa1-xNbxO3 (x = 0.35, 0.5) thin films deposited on MgO and LaAlO3 as a function of temperature. The observed phase sequence in the range from 90 K to 720 K is similar to the structural phase transitions of the end-member material KNbO3. Although similar in the phase sequence, the actual temperatures observed for phase transition temperatures are signi… ▽ More We report a Raman scattering investigation of KTa1-xNbxO3 (x = 0.35, 0.5) thin films deposited on MgO and LaAlO3 as a function of temperature. The observed phase sequence in the range from 90 K to 720 K is similar to the structural phase transitions of the end-member material KNbO3. Although similar in the phase sequence, the actual temperatures observed for phase transition temperatures are significantly different from those observed in the literature for bulk samples. Namely, the tetragonal (ferroelectric) to cubic (paraelectric) phase transition is up to 50 K higher in the films when compared to bulk samples. This enhanced ferroelectricity is attributed to biaxial strain in the investigated thin films. △ Less

Submitted 1 May, 2010; originally announced May 2010.

Journal ref: APPLIED PHYSICS LETTERS 96, 262903 (2010)

Epitaxial growth and magnetoelectric relaxor behavior in multiferroic 0.8Pb(Fe1/2Nb1/2)O3-0.2Pb(Mg1/2W1/2)O3 thin films

Authors: Wei Peng, N. Lemée, J. -L. Dellis, V. V. Shvartsman, P. Borisov, W. Kleemann, Z. Trontelj, J. Holc, M. Kosec, R. Blinc, M. G. Karkut

Abstract: We present electric and magnetic properties of 0.8Pb(Fe1/2Nb1/2)O3-0.2Pb(Mg1/2W1/2)O3 films epitaxially grown on (001) SrTiO3 substrates using pulsed laser deposition. A narrow deposition window around 710 oC and 0.2 mbar has been identified to achieve epitaxial single-phase thin films. A typical Vogel-Fulcher relaxor-like dielectric and magnetic susceptibility dispersion is observed, suggesting… ▽ More We present electric and magnetic properties of 0.8Pb(Fe1/2Nb1/2)O3-0.2Pb(Mg1/2W1/2)O3 films epitaxially grown on (001) SrTiO3 substrates using pulsed laser deposition. A narrow deposition window around 710 oC and 0.2 mbar has been identified to achieve epitaxial single-phase thin films. A typical Vogel-Fulcher relaxor-like dielectric and magnetic susceptibility dispersion is observed, suggesting magnetoelectric relaxor behavior in these films similar to the bulk. We determine a magnetic cluster freezing temperature of 36 K, while observing weak ferromagnetism via magnetic hysteresis loops up to 300 K. △ Less

Submitted 5 October, 2009; v1 submitted 4 September, 2009; originally announced September 2009.

Comments: 12 pages, 4 figures

Journal ref: Appl. Phys. Lett. 95 (2009) 132507

Fundamental mechanism underlying subwavelength optics of metamaterials: Charge oscillation-induced light emission and interference

Authors: X. R. Huang, R. W. Peng, Mu Wang

Abstract: Interactions between light and conducting nanostructures can result in a variety of novel and fascinating phenomena. These properties may have wide applications, but their underlying mechanisms have not been completely understood. From calculations of surface charge density waves on conducting gratings and by comparing them with classical surface plasmons, we revealed a general yet concrete pict… ▽ More Interactions between light and conducting nanostructures can result in a variety of novel and fascinating phenomena. These properties may have wide applications, but their underlying mechanisms have not been completely understood. From calculations of surface charge density waves on conducting gratings and by comparing them with classical surface plasmons, we revealed a general yet concrete picture about coupling of light to free electron oscillation on structured conducting surfaces that can lead to oscillating subwavelength charge patterns (i.e., spoof surface plasmons but without the dispersion property of classical surface plasmons). New wavelets emitted from these light sources then destructively interfere to form evanescent waves. This principle, usually combined with other mechanisms (e.g. resonance), is mainly a geometrical effect that can be universally involved in light scattering from all periodic and nonperiodic structures containing free electrons, including perfect conductors. The spoof surface plasmon picture may provide clear guidelines for developing metamaterial-based nano-optical devices. △ Less

Submitted 20 March, 2009; originally announced March 2009.

Comments: 11 pages, 9 figures, submitted to PRB (2009)

Spin-lattice coupling in multiferroic Pb(Fe1/2Nb1/2)O3 thin films

Authors: W. Peng, N. Lemée, M. Karkut, B. Dkhil, V. V. Shvartsman, P. Borisov, W. Kleemann, J. Holc, M. Kosec, R. Blinc

Abstract: We have made magnetization and x-ray diffraction measurements on an epitaxial Pb(Fe1/2Nb1/2)O3 200 nm film. From the temperature dependence of the out-of-plane lattice parameter we can assign a Burns' temperature at Td ~ 640 K, a temperature at T* ~ 510 K, related to the appearance of static polar nanoregions, and an anomaly occurring at 200 K. The latter is precisely the Néel temperature TN det… ▽ More We have made magnetization and x-ray diffraction measurements on an epitaxial Pb(Fe1/2Nb1/2)O3 200 nm film. From the temperature dependence of the out-of-plane lattice parameter we can assign a Burns' temperature at Td ~ 640 K, a temperature at T* ~ 510 K, related to the appearance of static polar nanoregions, and an anomaly occurring at 200 K. The latter is precisely the Néel temperature TN determined from magnetization and points to spin-lattice coupling at TN ~ 200 K. We also observe "weak ferromagnetism" up to 300K and propose superantiferromagnetic clusters as a plausible scenario to explain this hysteresis above TN. △ Less

Submitted 27 February, 2009; originally announced February 2009.

Comments: 12 pages, 4 figures

Journal ref: Appl. Phys. Lett. 94, 012509 (2009)

Epitaxial growth and structural characterization of Pb(Fe1/2Nb1/2)O3 thin films

Authors: W. Peng, N. Lemée, J Holc, M. Kosec, R. Blinc, M. G. Karkut

Abstract: We have grown lead iron niobate thin films with composition Pb(Fe1/2Nb1/2)O3 (PFN) on (0 0 1) SrTiO3 substrates by pulsed laser deposition. The influence of the deposition conditions on the phase purity was studied. Due to similar thermodynamic stability spaces, a pyrochlore phase often coexists with the PFN perovskite phase. By optimizing the kinetic parameters, we succeeded in identifying a de… ▽ More We have grown lead iron niobate thin films with composition Pb(Fe1/2Nb1/2)O3 (PFN) on (0 0 1) SrTiO3 substrates by pulsed laser deposition. The influence of the deposition conditions on the phase purity was studied. Due to similar thermodynamic stability spaces, a pyrochlore phase often coexists with the PFN perovskite phase. By optimizing the kinetic parameters, we succeeded in identifying a deposition window which resulted in epitaxial perovskite-phase PFN thin films with no identifiable trace of impurity phases appearing in the X-ray diffractograms. PFN films having thicknesses between 20 and 200 nm were smooth and epitaxially oriented with the substrate and as demonstrated by RHEED streaks which were aligned with the substrate axes. X-ray diffraction showed that the films were completely c-axis oriented and of excellent crystalline quality with low mosaicity (X-ray rocking curve FWHM<0.09). The surface roughness of thin films was also investigated by atomic force microscopy. The root-mean-square roughness varies between 0.9 nm for 50-nm-thick films to 16 nm for 100-nm-thick films. We also observe a correlation between grain size, surface roughness and film thickness. △ Less

Submitted 27 February, 2009; originally announced February 2009.

Comments: 13 Pages, 6 figures. To be published in J. Mag. Mag Mater. proceedings of EMRS2008

Ferromagnetism in 2p Light Element-Doped II-oxide and III-nitride Semiconductors

Authors: L. Shen, R. Q. Wu, H. Pan, G. W. Peng, M. Yang, Z. D. Sha, Y. P. Feng

Abstract: II-oxide and III-nitride semiconductors doped by nonmagnetic 2p light elements are investigated as potential dilute magnetic semiconductors (DMS). Based on our first-principle calculations, nitrogen doped ZnO, carbon doped ZnO, and carbon doped AlN are predicted to be ferromagnetic. The ferromagnetism of such DMS materials can be attributed to a p-d exchange-like p-p coupling interaction which i… ▽ More II-oxide and III-nitride semiconductors doped by nonmagnetic 2p light elements are investigated as potential dilute magnetic semiconductors (DMS). Based on our first-principle calculations, nitrogen doped ZnO, carbon doped ZnO, and carbon doped AlN are predicted to be ferromagnetic. The ferromagnetism of such DMS materials can be attributed to a p-d exchange-like p-p coupling interaction which is derived from the similar symmetry and wave function between the impurity (p-like t_2) and valence (p) states. We also propose a co-doping mechanism, using beryllium and nitrogen as dopants in ZnO, to enhance the ferromagnetic coupling and to increase the solubility and activity. △ Less

Submitted 13 September, 2007; originally announced September 2007.

Large LFMR observed in twinned La2/3Ca1/3MnO3 thin films epitaxially grown on YSZ-buffered SOI substrates

Authors: J. Li, P. Wang, J. Y. Xiang, X. H. Zhu, W. Peng, Y. F. Chen, D. N. Zheng, Z. W. Li

Abstract: La2/3Ca1/3MnO3 thin films have been grown on yttria-stabilized zirconia (YSZ) buffered silicon-on-insulator (SOI) substrate by the pulsed laser deposition technique. While full cube-on-cube epitaxy was achieved for the YSZ layer, the top manganite layer was multi-domain-oriented, with a coexistence of cube-on-cube and cube-on-diagonal epitaxy. Due to a combined influence from the magnetocrystall… ▽ More La2/3Ca1/3MnO3 thin films have been grown on yttria-stabilized zirconia (YSZ) buffered silicon-on-insulator (SOI) substrate by the pulsed laser deposition technique. While full cube-on-cube epitaxy was achieved for the YSZ layer, the top manganite layer was multi-domain-oriented, with a coexistence of cube-on-cube and cube-on-diagonal epitaxy. Due to a combined influence from the magnetocrystalline anisotropy and the magnetoelastic anisotropy, in zero field the local spin orientation varies across the twin boundaries. As a result, a quite large low-field magnetoresistance (LFMR) based on spin-dependent tunnelling was observed. The film shows a resistance change of ~20% in a magnetic field <1000 Oe at 50 K, which is promising for real applications. △ Less

Submitted 2 July, 2004; originally announced July 2004.

Comments: 3 pages, 4 figures

Analytical study of the effect of recombination on evolution via DNA shuffling

Authors: Weiqun Peng, Herbert Levine, Terence Hwa, David A. Kessler

Abstract: We investigate a multi-locus evolutionary model which is based on the DNA shuffling protocol widely applied in \textit{in vitro} directed evolution. This model incorporates selection, recombination and point mutations. The simplicity of the model allows us to obtain a full analytical treatment of both its dynamical and equilibrium properties, for the case of an infinite population. We also brief… ▽ More We investigate a multi-locus evolutionary model which is based on the DNA shuffling protocol widely applied in \textit{in vitro} directed evolution. This model incorporates selection, recombination and point mutations. The simplicity of the model allows us to obtain a full analytical treatment of both its dynamical and equilibrium properties, for the case of an infinite population. We also briefly discuss finite population size corrections. △ Less

Submitted 28 March, 2003; originally announced March 2003.

Dynamics of Competitive Evolution on a Smooth Landscape

Authors: Weiqun Peng, Ulrich Gerland, Terence Hwa, Herbert Levine

Abstract: We study competitive DNA sequence evolution directed by {\it in vitro} protein binding. The steady-state dynamics of this process is well described by a shape-preserving pulse which decelerates and eventually reaches equilibrium. We explain this dynamical behavior within a continuum mean-field framework. Analytical results obtained on the motion of the pulse agree with simulations. Furthermore,… ▽ More We study competitive DNA sequence evolution directed by {\it in vitro} protein binding. The steady-state dynamics of this process is well described by a shape-preserving pulse which decelerates and eventually reaches equilibrium. We explain this dynamical behavior within a continuum mean-field framework. Analytical results obtained on the motion of the pulse agree with simulations. Furthermore, finite population correction to the mean-field results are found to be insignificant. △ Less

Submitted 16 January, 2003; v1 submitted 4 April, 2002; originally announced April 2002.

Comments: 4 pages, 2 figures, revised, to appear in Phys. Rev. Lett

Journal ref: Phys. Rev. Lett. 90, 088103 (2003)

Connecting the vulcanization transition to percolation

Authors: Weiqun Peng, Paul M. Goldbart, Alan J. McKane

Abstract: The vulcanization transition is addressed via a minimal replica-field-theoretic model. The appropriate long-wave-length behavior of the two- and three-point vertex functions is considered diagrammatically, to all orders in perturbation theory, and identified with the corresponding quantities in the Houghton-Reeve-Wallace field-theoretic approach to the percolation critical phenomenon. Hence, it… ▽ More The vulcanization transition is addressed via a minimal replica-field-theoretic model. The appropriate long-wave-length behavior of the two- and three-point vertex functions is considered diagrammatically, to all orders in perturbation theory, and identified with the corresponding quantities in the Houghton-Reeve-Wallace field-theoretic approach to the percolation critical phenomenon. Hence, it is shown that percolation theory correctly captures the critical phenomenology of the vulcanization transition associated with the liquid and critical states. △ Less

Submitted 11 April, 2001; originally announced April 2001.

Comments: 9 pages, 5 figures

Density-correlator signatures of the vulcanization transition

Authors: Weiqun Peng, Paul M. Goldbart

Abstract: Certain density correlators, measurable via various experimental techniques, are studied in the context of the vulcanization transition. It is shown that these correlators contain essential information about both the vulcanization transition and the emergent amorphous solid state. Contact is made with various physical ingredients that have featured in experimental studies of amorphous colloidal… ▽ More Certain density correlators, measurable via various experimental techniques, are studied in the context of the vulcanization transition. It is shown that these correlators contain essential information about both the vulcanization transition and the emergent amorphous solid state. Contact is made with various physical ingredients that have featured in experimental studies of amorphous colloidal and gel systems and in theoretical studies of the glassy state. △ Less

Submitted 29 September, 2000; originally announced September 2000.

Comments: 7 pages, 1 figure

Correlations near the vulcanization transition: A renormalization-group approach

Authors: Weiqun Peng, Paul M. Goldbart

Abstract: Correlators describing the vulcanization transition are constructed and explored via a renormalization group approach. This approach is based on a minimal model that accounts for the thermal motion of constituents and the quenched random constraints imposed on their motion by crosslinks. Critical exponents associated with the correlators are obtained near six dimensions, and found to equal those… ▽ More Correlators describing the vulcanization transition are constructed and explored via a renormalization group approach. This approach is based on a minimal model that accounts for the thermal motion of constituents and the quenched random constraints imposed on their motion by crosslinks. Critical exponents associated with the correlators are obtained near six dimensions, and found to equal those governing analogous entities in percolation theory. Some expectations for how the vulcanization transition is realized in two dimensions, developed with H. E. Castillo, are discussed. △ Less

Submitted 23 December, 1999; originally announced December 1999.

Comments: 5 pages, 2 figures

Renormalization-Group Approach to the Vulcanization Transition

Authors: Weiqun Peng, Paul M. Goldbart

Abstract: The vulcanization transition - the crosslink-density-controlled equilibrium phase transition from the liquid to the amorphous solid state - is explored analytically from a renormalization group perspective. The analysis centers on a minimal model that accounts for both the thermal motion of the constituents and the quenched random constraints imposed on their motion by the crosslinks, as well as… ▽ More The vulcanization transition - the crosslink-density-controlled equilibrium phase transition from the liquid to the amorphous solid state - is explored analytically from a renormalization group perspective. The analysis centers on a minimal model that accounts for both the thermal motion of the constituents and the quenched random constraints imposed on their motion by the crosslinks, as well as particle-particle repulsion which suppresses density fluctuations. A correlation function involving fluctuations of the amorphous solid order parameter, the behavior of which signals the vulcanization transition, is examined, its physical meaning is elucidated, and the associated susceptibility is constructed and analyzed. A Ginzburg criterion for the width (in crosslink density) of the critical region is derived and is found to be consistent with a prediction due to de Gennes. Certain universal critical exponents characterizing the vulcanization transition are computed, to lowest nontrivial order, within the framework of an expansion around the upper critical dimension of six. This expansion shows that the connection between vulcanization and percolation extends beyond mean-field theory, at least to first order in the departure from the upper critical dimension. The relationship between the present approach to vulcanized matter and other approaches is explored in the light of this connection. To conclude, some expectations for how the vulcanization transition is realized in two dimensions, developed with H. E. Castillo, are discussed. △ Less

Submitted 4 November, 1999; originally announced November 1999.

Comments: 23 pages, 4 figures

Universality and its Origins at the Amorphous Solidification Transition

Authors: Weiqun Peng, Horacio E. Castillo, Paul M. Goldbart, Annette Zippelius

Abstract: Systems undergoing an equilibrium phase transition from a liquid state to an amorphous solid state exhibit certain universal characteristics. Chief among these are the fraction of particles that are randomly localized and the scaling functions that describe the order parameter and (equivalently) the statistical distribution of localization lengths for these localized particles. The purpose of th… ▽ More Systems undergoing an equilibrium phase transition from a liquid state to an amorphous solid state exhibit certain universal characteristics. Chief among these are the fraction of particles that are randomly localized and the scaling functions that describe the order parameter and (equivalently) the statistical distribution of localization lengths for these localized particles. The purpose of this Paper is to discuss the origins and consequences of this universality, and in doing so, three themes are explored. First, a replica-Landau-type approach is formulated for the universality class of systems that are composed of extended objects connected by permanent random constraints and undergo amorphous solidification at a critical density of constraints. This formulation generalizes the cases of randomly cross-linked and end-linked macromolecular systems, discussed previously. The universal replica free energy is constructed, in terms of the replica order parameter appropriate to amorphous solidification, the value of the order parameter is obtained in the liquid and amorphous solid states, and the chief universal characteristics are determined. Second, the theory is reformulated in terms of the distribution of local static density fluctuations rather than the replica order parameter. It is shown that a suitable free energy can be constructed, depending on the distribution of static density fluctuations, and that this formulation yields precisely the same conclusions as the replica approach. Third, the universal predictions of the theory are compared with the results of extensive numerical simulations of randomly cross-linked macromolecular systems, due to Barsky and Plischke, and excellent agreement is found. △ Less

Submitted 23 September, 1997; originally announced September 1997.

Comments: 10 pages, including 3 figures (REVTEX)

Report number: UIUC P-97-07-023-ii

Journal ref: Phys. Rev. B 57, 839 (1998)