-
Ultrahigh electrostrain in Pb-free piezoceramics: Effect of bending
Authors:
Gobinda Das Adhikary,
John Daniels,
Luke Giles,
Rajeev Ranjan
Abstract:
Recently several reports showing ultra-high electrostrain (> 1 %) have appeared in Pb-free piezoceramics. However, there is lack of clarity on the nature of the ultrahigh strain. Here, we demonsrate that the ultrahigh strain is a consequence of bending of the disc. We show that the propensity for bending arises from the difference in the response magnitude of the grains at the positive and negativ…
▽ More
Recently several reports showing ultra-high electrostrain (> 1 %) have appeared in Pb-free piezoceramics. However, there is lack of clarity on the nature of the ultrahigh strain. Here, we demonsrate that the ultrahigh strain is a consequence of bending of the disc. We show that the propensity for bending arises from the difference in the response magnitude of the grains at the positive and negative surfaces of the piezoceramic when the field is applied.
△ Less
Submitted 25 December, 2023;
originally announced December 2023.
-
Giant electrostriction in bulk RE (III) substituted CeO2: effect of RE 3+ and its concentration
Authors:
Soumyajyoti Mondal,
Pooja Punetha,
Rajeev Ranjan,
Pavan Nukala
Abstract:
Recent discovery of giant electrostriction in rare earth (RE (III)) substituted ceria (CeO2) thin films driven by electroactive defect complexes and their coordinated elastic response, expands the material spectrum for electrostrain applications beyond the conventional piezoelectric materials. Especially Gd substituted CeO2, with Gd concentration >10% seems to be an ideal material to obtain such l…
▽ More
Recent discovery of giant electrostriction in rare earth (RE (III)) substituted ceria (CeO2) thin films driven by electroactive defect complexes and their coordinated elastic response, expands the material spectrum for electrostrain applications beyond the conventional piezoelectric materials. Especially Gd substituted CeO2, with Gd concentration >10% seems to be an ideal material to obtain such large electrostrain response. However, there are not many experimental studies that systematically investigate the effect of RE (III) ion-defect interaction and RE concentration on electrostriction. Here we perform structure-property correlation studies in bulk ceramics of RE3+ substituted ceria doped with RE=Y, La and Gd at various concentrations upto a maximum of 20%, to understand the features responsible for giant electrostriction. Our results show that Y substituted ceria, with atleast 20% Y substitution, is clearly both a giant M and a Q electrostrictor at low frequencies (<20 Hz), and this correlates with the unique attractive defect-dopant interaction of Y with oxygen vacancies. La has a repulsive interaction with oxygen vacancies, and La doped ceria at all the studied compositions (upto 20%) does not show giant electrostiction. Gd has a neutral interaction, and only 20% Gd doped ceria at best falls at the border of classification between giant and non-giant electrostrictors at frequencies <0.05 Hz. Our work takes a step back from thin-films and assesses the fundamental defect features required in the design of giant electrostrictors.
△ Less
Submitted 23 September, 2023;
originally announced September 2023.
-
Ultrahigh electrostrain > 1% in lead-free piezoceramics: A critical review
Authors:
Gobinda Das Adhikary,
Digivijay Narayan Singh,
Getaw Abebe Tina,
Gudeta Jafo Muleta,
Rajeev Ranjan
Abstract:
Recently, a series of reports showing ultra-high electrostrain (> 1 %) have appeared in several Pb-free piezoceramics. The ultrahigh electrostrain has been attributed exclusively to the defect dipoles created in these systems. We examine these claims based on another report arXiv:2208.07134 which demonstrated that the measured electric field driven strain increased dramatically simply by reducing…
▽ More
Recently, a series of reports showing ultra-high electrostrain (> 1 %) have appeared in several Pb-free piezoceramics. The ultrahigh electrostrain has been attributed exclusively to the defect dipoles created in these systems. We examine these claims based on another report arXiv:2208.07134 which demonstrated that the measured electric field driven strain increased dramatically simply by reducing the thickness of the ceramic discs. We prepared some representative Pb-free compositions reported to exhibit ultrahigh strain and performed electrostrain measurements. We found that these compositions do not show ultrahigh electrostrain if the thickness of the discs is above 0.3 mm (the disc diameters were in the range 10- 12 mm diameter). The ultrahigh strain values were obtained when the thickness was below 0.3 mm. We compare the electrostrain obtained from specimens designed to exhibit defect dipoles with specimens that were not designed to have defect dipoles in Na0.5Bi0.5TiO3 (NBT) and K0.5Na0.5NbO3 (KNN) -based lead-free systems and could obtain much higher strain levels (4- 5 %) in the defect dipole free piezoceramics in the small thickness regime. Our results do not favor the defect dipole theory as the exclusive factor for causing ultrahigh strain in piezoceramics. A new approach is called for to understand the phenomenon of ultrahigh electrostrain caused by the thickness reduction of piezoceramic discs.
△ Less
Submitted 5 June, 2023;
originally announced June 2023.
-
Giant electromechanical response from defective non-ferroelectric epitaxial BaTiO3 integrated on Si 100
Authors:
Sandeep Vura,
Shubham Kumar Parate,
Subhajit Pal,
Upanya Khandelwal,
Rajeev Kumar Rai,
Sri Harsha Molleti,
Vishnu Kumar,
Rama Satya Sandilya Ventrapragada,
Girish Patil,
Mudit Jain,
Ambresh Mallya,
Majid Ahmadi,
Bart Kooi,
Sushobhan Avasthi,
Rajeev Ranjan,
Srinivasan Raghavan,
Saurabh Chandorkar,
Pavan Nukala
Abstract:
Lead free, silicon compatible materials showing large electromechanical responses comparable to, or better than conventional relaxor ferroelectrics, are desirable for various nanoelectromechanical devices and applications. Defect-engineered electrostriction has recently been gaining popularity to obtain enhanced electromechanical responses at sub 100 Hz frequencies. Here, we report record values o…
▽ More
Lead free, silicon compatible materials showing large electromechanical responses comparable to, or better than conventional relaxor ferroelectrics, are desirable for various nanoelectromechanical devices and applications. Defect-engineered electrostriction has recently been gaining popularity to obtain enhanced electromechanical responses at sub 100 Hz frequencies. Here, we report record values of electrostrictive strain coefficients (M31) at frequencies as large as 5 kHz (1.04 x 10-14 m2 per V2 at 1 kHz, and 3.87 x 10-15 m2 per V2 at 5 kHz) using A-site and oxygen-deficient barium titanate thin-films, epitaxially integrated onto Si. The effect is robust and retained even after cycling the devices >5000 times. Our perovskite films are non-ferroelectric, exhibit a different symmetry compared to stoichiometric BaTiO3 and are characterized by twin boundaries and nano polar-like regions. We show that the dielectric relaxation arising from the defect-induced features correlates very well with the observed giant electrostrictive response. These films show large coefficient of thermal expansion (2.36 x 10-5/K), which along with the giant M31 implies a considerable increase in the lattice anharmonicity induced by the defects. Our work provides a crucial step forward towards formulating guidelines to engineer large electromechanical responses even at higher frequencies in lead-free thin films.
△ Less
Submitted 6 March, 2023;
originally announced March 2023.
-
Ultrahigh measured electrostrain in polycrystalline bulk piezoceramics: Role of mechanically relaxed grains
Authors:
Gobinda Das Adhikary,
Rajeev Ranjan
Abstract:
Recently we found that when conventional bulk polycrystalline piezoceramics discs (~ 10 mm diameter) are thinned down to thickness ~ 200 microns or below, the measured unipolar electrostrain (UES) values increased phenomenally (arXiv:2208.07134). Here we demonstrate that this anomalous phenomenon correlates strongly with the decrease in the degree of mutual mechanical clamping between the grains w…
▽ More
Recently we found that when conventional bulk polycrystalline piezoceramics discs (~ 10 mm diameter) are thinned down to thickness ~ 200 microns or below, the measured unipolar electrostrain (UES) values increased phenomenally (arXiv:2208.07134). Here we demonstrate that this anomalous phenomenon correlates strongly with the decrease in the degree of mutual mechanical clamping between the grains which in turn enables enhanced switching of the ferroelastic domains.
△ Less
Submitted 31 August, 2022;
originally announced September 2022.
-
Ultrahigh measured unipolar strain greater than 2 % in polycrystalline bulk piezoceramics: Effects of disc dimension
Authors:
Gobinda Das Adhikary,
Rajeev Ranjan
Abstract:
Bulk polycrystalline piezoelectric ceramics are extensively used in wide ranging applications as actuators, transducers, and sensors. For actuator applications, it is desirable that the piezoelectric ceramic gives as large electric field driven unipolar strain as possible. In recent years there is an increasing interest in the design and development of such piezoceramic materials. Here we show tha…
▽ More
Bulk polycrystalline piezoelectric ceramics are extensively used in wide ranging applications as actuators, transducers, and sensors. For actuator applications, it is desirable that the piezoelectric ceramic gives as large electric field driven unipolar strain as possible. In recent years there is an increasing interest in the design and development of such piezoceramic materials. Here we show that piezoceramic discs (10 mm diameter) of PZT, BaTiO3-based and Na0.5Bi0.5TiO3-based polycrystalline piezoceramics can show very large unipolar strain 2 to 3 % when the thickness of the discs is reduced to 200 microns or below. This is accompanied by increasing asymmetry in the bipolar strain-field loops. The motivation of this brief report is make the research community aware of this important effect in piezoceramics and encourage discussion/research on the this interesting phenomenon, which is applicable to all piezoceramics.
△ Less
Submitted 15 August, 2022;
originally announced August 2022.
-
Neutron-Irradiation Induced Magnetization and Persistent Defects at High Temperatures in Graphite
Authors:
Ranjan Mittal,
Mayanak K. Gupta,
Sanjay K. Mishra,
Sourabh Wajhal,
Peram Delli Babu,
Baltej Singh,
Anil Bhimrao Shinde,
Poluri Siva Rama Krishna,
Rakesh K. Singhal,
Rakesh Ranjan,
Samrath Lal Chaplot
Abstract:
Structural as well as magnetization studies have been carried out on graphite samples irradiated by neutrons over 50 years in the CIRUS research reactor at Trombay. Neutron diffraction studies reveal that the defects in irradiated graphite samples are not well annealed and remain significant up to high temperatures much greater than 653 K where the Wigner energy is completely released. We infer th…
▽ More
Structural as well as magnetization studies have been carried out on graphite samples irradiated by neutrons over 50 years in the CIRUS research reactor at Trombay. Neutron diffraction studies reveal that the defects in irradiated graphite samples are not well annealed and remain significant up to high temperatures much greater than 653 K where the Wigner energy is completely released. We infer that the remnant defects may be intralayer Frenkel defects, which do not store large energy, unlike the interlayer Frenkel defects that store the Wigner energy. Magnetization studies on the irradiated graphite show ferromagnetic behavior even at 300 K and a large additional paramagnetic contribution at 5 K. Ab-initio calculations based on the spin-polarized density-functional theory show that the magnetism in defected graphite is essentially confined on to a single 2-coordinated carbon atom that is located around a vacancy in the hexagonal layer.
△ Less
Submitted 10 August, 2020;
originally announced August 2020.
-
Defect topology and annihilation by cooperative cascading movement of atoms in highly neutron irradiated graphite
Authors:
Ranjan Mittal,
Mayanak K. Gupta,
Sanjay K. Mishra,
Sourabh Wajhal,
Himanshu K. Poswal,
Baltej Singh,
Anil Bhimrao Shinde,
Poluri Siva Rama Krishna,
Peram Delli Babu,
Ratikant Mishra,
Pulya Umamaheswara Sastry,
Rakesh Ranjan,
Samrath Lal Chaplot
Abstract:
Graphite has been used as neutron moderator or reflector in many nuclear reactors. The irradiation of graphite in a nuclear reactor results in a complex population of defects. Heating of the irradiated graphite at high temperatures results in annihilation of the defects with release of an unusually large energy, called the Wigner energy. From various experiments on highly irradiated graphite sampl…
▽ More
Graphite has been used as neutron moderator or reflector in many nuclear reactors. The irradiation of graphite in a nuclear reactor results in a complex population of defects. Heating of the irradiated graphite at high temperatures results in annihilation of the defects with release of an unusually large energy, called the Wigner energy. From various experiments on highly irradiated graphite samples from CIRUS reactor at Trombay and ab-initio simulations, we have for the first time identified various 2-, 3- and 4-coordinated topological structures in defected graphite, and provided microscopic mechanism of defect annihilation on heating and release of the Wigner energy. The annihilation process involves cascading cooperative movement of atoms in two steps involving an intermediate structure. Our work provides new insights in understanding of the defect topologies and annihilation in graphite which is of considerable importance to wider areas of graphitic materials including graphene and carbon nanotubes.
△ Less
Submitted 14 February, 2020;
originally announced February 2020.
-
High Pressure Structural Investigation on Lead-Free Piezoelectric $0.5Ba(Ti_{0.8}Zr_{0.2})O_3$-$0.5(Ba_{0.7}Ca_{0.3})TiO_3$
Authors:
Anshuman Mondal,
Pinku Saha,
Bishnupada Ghosh,
Mrinmay Sahu,
Goutam Dev Mukherjee,
Rajeev Ranjan,
Kumar Brajesh
Abstract:
The solid solution $0.5Ba(Ti_{0.8}Zr_{0.2})O_3$-$0.5(Ba_{0.7}Ca_{0.3})TiO_3$ (BCZT) has become a promising member of the lead-free piezoelectric materials because of its exceptionally high piezoelectric properties. In this study, we focus on studying pressure-dependent Raman spectroscopy, powder x-ray diffraction and dielectric constant measurements on BCZT. The data show several structural transi…
▽ More
The solid solution $0.5Ba(Ti_{0.8}Zr_{0.2})O_3$-$0.5(Ba_{0.7}Ca_{0.3})TiO_3$ (BCZT) has become a promising member of the lead-free piezoelectric materials because of its exceptionally high piezoelectric properties. In this study, we focus on studying pressure-dependent Raman spectroscopy, powder x-ray diffraction and dielectric constant measurements on BCZT. The data show several structural transitions are present, where the system from ambient mixed phase (tetragonal, {\it {P4mm}}+ orthorhombic {\it {Amm2}}) transforms into single phase ({\it {P4mm}}) at 0.26 GPa, then converts into cubic phase ({\it {Pm3m}}) at 4.7 GPa followed by another possible structural re-ordering around 10 GPa. Although there have been a lot of unanimity with the ambient crystallographic state of BCZT, our analysis justifies the presence of an intermediate orthorhombic phase in the Morphological Phase Boundary (MPB) of BCZT phase diagram. The transformation tetragonal to cubic is indicated by the Raman mode softening, unit cell volume change and the $(Ti/Zr)O_6$ octahedra distortion, which coincides with the well-known ferroelectric-paraelectric transition of the system. The sudden drop in the dielectric constant value at 4.7 GPa also confirms the loss of ferroelectric nature of the BCZT ceramic.
△ Less
Submitted 3 February, 2020;
originally announced February 2020.
-
Length-scale dependent average structures, piezoelectricity enhancement and depolarization mechanisms in a non-MPB high-performance piezoelectric alloy system PbTiO3-Bi(Zr1/2Ni1/2)O3
Authors:
Rishikesh Pandey,
Dipak Kumar Khatua,
Shekhar Tyagi,
Mulualem Abebe,
Bastola Narayan,
Vasant Sathe,
Rajeev Ranjan
Abstract:
There is a general perception that large piezoelectric response in ferroelectric alloys requires tuning the system towards a morphotropic phase boundary (MPB), i.e., a composition driven inter-ferroelectric instability. Here we show that high piezoelectric response can be realized even in non-MPB alloy systems. This is demonstrated on (1-x)PbTiO3-(x)Bi(Zr0.5Ni0.5)O3 (PT-BNZ) by a comprehensive stu…
▽ More
There is a general perception that large piezoelectric response in ferroelectric alloys requires tuning the system towards a morphotropic phase boundary (MPB), i.e., a composition driven inter-ferroelectric instability. Here we show that high piezoelectric response can be realized even in non-MPB alloy systems. This is demonstrated on (1-x)PbTiO3-(x)Bi(Zr0.5Ni0.5)O3 (PT-BNZ) by a comprehensive study involving electric-field and temperature dependent XRD, Raman spectroscopy, dielectric, piezoelectric and high field electrostrain measurements. We found that poling-field irreversibly suppresses the cubic-like phase at room temperature. Based on our results, we argue that that which appears as MPB, comprising of tetragonal and cubic-like phases on the global scale, is not so actually. The large piezoresponse is due to coexistence of tetragonal regions of long and short-range coherence. The PT-BNZ system is therefore qualitatively different from the conventional MPB systems such as PZT, PMN-PT, and PbTiO3-BiScO3, etc., which exhibits coexisting tetragonal and rhombohedral/monoclinic phases in thermodynamic equilibrium. In the absence of inter-ferroelectric instability as a phenomenon, field induced polarization-rotation and inter-ferroelectric transformation are no longer plausible mechanisms to explain the large piezoelectric response in PT-BNZ. The large piezoelectricity is primarily due to enhanced mobility of the tetragonal domain walls enabled by domain miniaturization. Our study proves that attainment of large piezoelectricity does not require inter-ferroelectric instability as a necessary criterion.
△ Less
Submitted 10 January, 2018;
originally announced January 2018.
-
Grain-size dependent electric-field induced structural changes in relaxor-ferroelectric based unclamped piezoelectric grains
Authors:
Bhoopesh Mahale,
Rishikesh Pandey,
Naveen Kumar,
Rajeev Ranjan
Abstract:
Polymer-piezoceramic 0-3 composites combine the flexibility of the polymers and the excellent piezoelectric properties of the ferroelectric based ceramic. While grain size of the ceramic powder is one of the important considerations in the fabrication of such composites, a correlation relating poling field induced structural changes and its possible influence on the overall piezoelectric response…
▽ More
Polymer-piezoceramic 0-3 composites combine the flexibility of the polymers and the excellent piezoelectric properties of the ferroelectric based ceramic. While grain size of the ceramic powder is one of the important considerations in the fabrication of such composites, a correlation relating poling field induced structural changes and its possible influence on the overall piezoelectric response of the composite is still lacking. In this paper, we examine this issue on a 0-3 piezo-composite comprising of a ceramic powders of a low-lead piezoelectric alloy (x)Bi(Ni1/2Zr1/2O3-(1-x)PbTiO3 in proximity of its morphotropic phase boundary, and polyvinylidene fluoride (PVDF) as the polymer component. Composites were fabricated by fixing the volume fraction of the ceramic while varying the grain size. We found a non-monotonic variation in the piezo-response as a function of grain size. Structural analysis before and after poling of the piezo-composites revealed evidence of poling induced cubic-like to tetragonal irreversible transformation, the extent of which is dependent on the grain size.
△ Less
Submitted 29 September, 2017;
originally announced September 2017.
-
Correlation between structure and Rayleigh parameters in the lead-free piezoceramic (1-x)Ba(Ti0.88 Sn0.12)O3-x(Ba0.7Ca0.3)TiO3
Authors:
Mulualem Abebe,
Kumar Brajesh,
Rajeev Ranjan
Abstract:
Composition dependent Rayleigh and structural analysis was carried out on the lead-free piezoceramics (1-x)(BaTi0.88Sn0.12)-x(Ba0.7Ca0.3)TiO3 at room temperature. The system exhibits tetragonal (P4mm) structure for x > 0.21, rhombohedral (R3m) for x < 0.13 and orthorhombic (Amm2) for 0.13<x<0.21. Rayleigh analysis suggests that the irreversible contribution to the dielectric response is enhanced i…
▽ More
Composition dependent Rayleigh and structural analysis was carried out on the lead-free piezoceramics (1-x)(BaTi0.88Sn0.12)-x(Ba0.7Ca0.3)TiO3 at room temperature. The system exhibits tetragonal (P4mm) structure for x > 0.21, rhombohedral (R3m) for x < 0.13 and orthorhombic (Amm2) for 0.13<x<0.21. Rayleigh analysis suggests that the irreversible contribution to the dielectric response is enhanced in the single phase orthorhombic compositions in the vicinity of the R3m-Amm2 and Amm2-P4mm phase boundaries, and not in compositions exhibiting phase coexistences (x = 0.12 and 0.22). We also found a correspondence between the irreversible Rayleigh parameter and the coercive field in this system.
△ Less
Submitted 18 September, 2017;
originally announced September 2017.
-
Tuning photoluminescence response by electric field in the lead-free piezoelectric Na1/2Bi1/2TiO3-BaTiO3
Authors:
Deepak Kumar Khatua,
Abhijeet Kalaskar,
Rajeev Ranjan
Abstract:
We show that an electrically soft ferroelectric host can be used to tune the photoluminescence (PL) response of rare-earth emitter ions by external electric field. The proof of this concept is demonstrated by changing the PL response of Eu+3 ion by electric field on a model system Eu-doped 0.94Na1/2Bi1/2TiO3-0.06BaTiO3. We also show that new channels of radiative transitions, forbidden otherwise,…
▽ More
We show that an electrically soft ferroelectric host can be used to tune the photoluminescence (PL) response of rare-earth emitter ions by external electric field. The proof of this concept is demonstrated by changing the PL response of Eu+3 ion by electric field on a model system Eu-doped 0.94Na1/2Bi1/2TiO3-0.06BaTiO3. We also show that new channels of radiative transitions, forbidden otherwise, open up due to positional disorder in the system, which can as well be tuned by electric field.
△ Less
Submitted 18 September, 2017;
originally announced September 2017.
-
A structural perspective on the origin of the anomalous weak-field piezoelectric response at the polymorphic phase boundaries of (Ba, Ca)(Ti, M)O3 lead-free piezoelectrics
Authors:
Mulualem Abebe,
Kumar Brajesh,
Anupam Mishra,
Anatoliy Senyshyn,
Rajeev Ranjan
Abstract:
In this paper, we compare the structural features of Ca modified Ba(Ti, Sn)O3 with that of its Ca-free counterpart to understand why the Ca-modified variant of this lead-free piezoelectric gives a much higher piezoelectric response. We found that in spite of the reduced spontaneous lattice strain, the polarization of the Ca-modified variant is higher. We, therefore, demonstrate that the very large…
▽ More
In this paper, we compare the structural features of Ca modified Ba(Ti, Sn)O3 with that of its Ca-free counterpart to understand why the Ca-modified variant of this lead-free piezoelectric gives a much higher piezoelectric response. We found that in spite of the reduced spontaneous lattice strain, the polarization of the Ca-modified variant is higher. We, therefore, demonstrate that the very large piezoelectric response of (Ba, Ca)(Ti, Sn)O3 is associated with the decoupling of the polarization and lattice strain by Ca-modification.
△ Less
Submitted 18 September, 2017;
originally announced September 2017.
-
Magnetic field driven enhanced ferroelectric switching in self-grown ferroelectric-ferromagnetic composite in the BiFeO3-BaTiO3 multiferroic alloy system
Authors:
Amit Kumar,
Bastola Narayan,
Rohit P,
Rajeev Ranjan
Abstract:
Over the years attempts have been made to compensate for the inherent weaknesses in the bulk state of the multiferroic BiFeO3, such as high leakage current and the absence of ferromagnetic correlation, and exploit its magnetoelectric potential by forming solid solutions with other perovskites. Studies in the recent few years have shown that alloying of BiFeO3 with BaTiO3, both with and without add…
▽ More
Over the years attempts have been made to compensate for the inherent weaknesses in the bulk state of the multiferroic BiFeO3, such as high leakage current and the absence of ferromagnetic correlation, and exploit its magnetoelectric potential by forming solid solutions with other perovskites. Studies in the recent few years have shown that alloying of BiFeO3 with BaTiO3, both with and without additives, can induce both ferroelectric and ferromagnetic switching. While the coexistence of both the ferroic orders is encouraging from the view point of technological applications, the origin of ferromagnetism in this system remains elusive. Here, we synthesized such compositions and carried out a detailed structural analysis employing magnetic separation of the powder particles. We found that the origin of ferromagnetism lies in the spontaneous precipitation of a minor ( ~ 1 wt %) barium hexaferrite (BaFe9O19) phase, often undetected in routine x-ray diffraction studies of powders sampled from the entire specimen. We also demonstrate that inspite of the insignificant fraction the ferrimagnetic phase, this self-grown composite exhibit noticeably enhanced ferroelectric switching in the presence of external magnetic field. We obtained a dc magnetoelectric coupling of ~ 9 x 10-8 s/m, a value which is comparable to what has been reported for layered ferroelectric/ferromagnetic laminates and bilayer thin film ferroelectric-ferromagnetic hetrostructures. Our study suggests that reasonably large magnetoelectric coupling is realizable in simple 0-3 ferroelectric-ferromagnetic bulk composites provided synthesis strategies are developed which induces spontaneous precipitation of the ferromagnetic phase in small volume fraction to ensure good insulating behaviour of the composite thus developed.
△ Less
Submitted 18 September, 2017;
originally announced September 2017.
-
Mechanism of magnetostructural transformation in multifunctional Mn$_3$GaC
Authors:
E. T. Dias,
K. R. Priolkar,
R. Ranjan,
A. K. Nigam,
S. Emura
Abstract:
Mn$_3$GaC undergoes a ferromagnetic to antiferromagnetic, volume discontinuous cubic-cubic phase transition as a function of temperature, pressure and magnetic field. Through a series of temperature dependent x-ray absorption fine structure spectroscopy experiments at the Mn K and Ga K edge, it is shown that the first order magnetic transformation in Mn$_3$GaC is entirely due to distortions in Mn…
▽ More
Mn$_3$GaC undergoes a ferromagnetic to antiferromagnetic, volume discontinuous cubic-cubic phase transition as a function of temperature, pressure and magnetic field. Through a series of temperature dependent x-ray absorption fine structure spectroscopy experiments at the Mn K and Ga K edge, it is shown that the first order magnetic transformation in Mn$_3$GaC is entirely due to distortions in Mn sub-lattice and with a very little role for Mn-C interactions. The distortion in Mn sub-lattice results in long and short Mn-Mn bonds with the longer Mn-Mn bonds favoring ferromagnetic interactions and the shorter Mn-Mn bonds favoring antiferromagnetic interactions. At the first order transition, the shorter Mn-Mn bonds exhibit an abrupt decrease in their length resulting in an antiferromagnetic ground state and a strained lattice.
△ Less
Submitted 31 August, 2017;
originally announced August 2017.
-
Extrinsic Rayleigh coefficient and domain mobility in critical MPB compositions of high-performance piezoceramics: A revisit
Authors:
Mulualem Abebe,
Rajeev Ranjan
Abstract:
Enhanced domain mobility is considered as one of the important characteristics of morphotropic phase boundary (MPB) ferroelectrics exhibiting a very large piezoelectric response. For nearly two decades, Rayleigh analysis of dielectric and piezoelectric response at sub-coercive fields has been used as a phenomenological tool to determine the relative contribution of domain walls in influencing pola…
▽ More
Enhanced domain mobility is considered as one of the important characteristics of morphotropic phase boundary (MPB) ferroelectrics exhibiting a very large piezoelectric response. For nearly two decades, Rayleigh analysis of dielectric and piezoelectric response at sub-coercive fields has been used as a phenomenological tool to determine the relative contribution of domain walls in influencing polar properties in these systems. The high value of the extrinsic Rayleigh coefficient at the MPB is generally attributed to enhanced domain mobility. Using coercive field as a measure of hindrance to domain mobility, in this paper, we have examined the correlation between the extrinsic Rayleigh coefficient, piezoelectric response, and coercive field (EC) by a comparative study on three different high performance piezoelectrics (i) (BaTi0.88Sn0.12)-(Ba0.7Ca0.3)TiO3, (ii) Pb(Zr,Ti)O3 and (iii) PbTiO3-BiScO3 across their respective MPBs. Our study shows that although the three systems exhibit maximum piezoelectric response and maximum extrinsic Rayleigh coefficient for their respective MPB compositions, the domain mobility in the MPB compositions of the Pb-based systems is not the highest. The lead-free system, on the other hand, exhibits highest domain mobility for the critical MPB composition. Contrary to the common perception, our study reveals that large value of the Rayleigh coefficient at the MPB is not necessarily indicative of enhanced domain mobility. We argue that the large piezoresponse in MPB systems is a result of complex interplay of field induced motion of the interphase boundaries and domain walls. In the lead-based systems the interphase boundary motion hinders domain wall mobility. The large value of the Rayleigh coefficient and piezoresponse in the Pb-based systems is because of the dominant role of the interphase boundary motion instead of the enhanced domain wall mobility.
△ Less
Submitted 26 November, 2015; v1 submitted 22 November, 2015;
originally announced November 2015.
-
Evidence of field induced inter-ferroelectric transformation as the dominant driving mechanism for anomalous piezoresponse in the morphotropic phase boundary piezoelectric system PbTiO3-BiScO3
Authors:
Lalitha K. V.,
Chris M. Fancher,
Jacob L. Jones,
Rajeev Ranjan
Abstract:
The contributory mechanisms associated with high piezoelectric response in piezoelectric ceramics have been examined by in-situ electric field dependent high energy synchro x-ray diffraction study. A comparative study of electric field induced lattice strain and the propensity for non-180o domain switching on two closeby compositions of a high performance piezoelectric alloy (1-x)PbTiO3-(x)BiScO3,…
▽ More
The contributory mechanisms associated with high piezoelectric response in piezoelectric ceramics have been examined by in-situ electric field dependent high energy synchro x-ray diffraction study. A comparative study of electric field induced lattice strain and the propensity for non-180o domain switching on two closeby compositions of a high performance piezoelectric alloy (1-x)PbTiO3-(x)BiScO3, one within the morphotropic phase boundary (MPB) region exhibiting d33 of 425 pC/N and another just outside the MPB region exhibiting d33 of 260 pC/N, unravelled that, inspite of the MPB specimen exhibiting considerably high piezoelectric response, its lattice strain and domain switching propensity is considerably less as compared to the non-MPB specimen. These new experimental observations contradict the commonly held view that anomalous piezoelectric response in MPB based piezoelectrics arise due to enhanced propensity for domain switching. Our results show the dominant mechanism contributing to the anomalous piezo-response is field induced interferroelectric transformation.
△ Less
Submitted 24 August, 2015;
originally announced August 2015.
-
Strong interrelationship between anomalous electric-field induced lattice strain along non-polar direction and domain reorientation in pseudorhombohedral piezoelectric ceramic BiScO3-PbTiO3
Authors:
Lalitha KV,
Chris M. Fancher,
Jacob L. Jones,
Rajeev Ranjan
Abstract:
The lattice strain and domain switching behaviour was investigated as a function of cyclic field and grain orientation for a pseudorhombohedral composition of the high Curie point piezoelectric system xBiScO3 - (1-x)PbTiO3 (x = 0.40) by in-situ electric field diffraction technique with high energy synchrotron x-rays. Along the field direction, the system exhibts five time large strain along 100 as…
▽ More
The lattice strain and domain switching behaviour was investigated as a function of cyclic field and grain orientation for a pseudorhombohedral composition of the high Curie point piezoelectric system xBiScO3 - (1-x)PbTiO3 (x = 0.40) by in-situ electric field diffraction technique with high energy synchrotron x-rays. Along the field direction, the system exhibts five time large strain along 100 as compared to the 111 direction. A one-to-one correspondence between the 200 lattice strain and the 111 domain switching suggests a strong correlation between the two phenomena.
△ Less
Submitted 4 August, 2015;
originally announced August 2015.
-
Influence of electric field on the Eu+3 photolumiscence in lead-free ferroelectric Na1/2Bi1/2TiO3
Authors:
Abhijeet Kalaskar,
Badari Narayana Rao,
Tiju Thomas,
Rajeev Ranjan
Abstract:
Eu modified Na1/2Bi1/2TiO3 (NBT) was investigated for electric-field induced Eu+3 photoluminescence (PL) and structural changes. Detailed analysis revealed that below a critical Eu composition electric field irreversibly suppresses the structural heterogeneity inherent of the host matrix NBT and brings about a long range ferroelectric state with rhombohedral (R3c) distortion. PL study revealed tha…
▽ More
Eu modified Na1/2Bi1/2TiO3 (NBT) was investigated for electric-field induced Eu+3 photoluminescence (PL) and structural changes. Detailed analysis revealed that below a critical Eu composition electric field irreversibly suppresses the structural heterogeneity inherent of the host matrix NBT and brings about a long range ferroelectric state with rhombohedral (R3c) distortion. PL study revealed that structural disorder on the nano-scale opens new channels of radiative transitions which can be suppressed by electric field. This study suggests that Eu+3 luminescence can be used to probe the relative degree of field induced structural ordering in relaxor ferroelectrics and also in high performance piezoelectric alloys where electric field couples very strongly with the lattice and structural degrees of freedom.
△ Less
Submitted 19 July, 2015;
originally announced July 2015.
-
Crystallite size dependence of morphotropic phase boundary in the multiferroic BiFeO3-PbTiO3
Authors:
Bastola Narayan,
V. Kothai,
Rajeev Ranjan
Abstract:
The morphotropic phase boundary (MPB) in the magnetoelectric multiferroic BiFeO3-PbTiO3 is shown to be uniquely dependent on crystallite size. The system exhibits the phenomenon of abnormal grain growth (AGG) during sintering with abrupt increase in the grain size from ~ 1 micron to ~ 10 microns. The large sized free crystallites (10 microns) exhibit pure tetragonal phase. Phase coexistence sets i…
▽ More
The morphotropic phase boundary (MPB) in the magnetoelectric multiferroic BiFeO3-PbTiO3 is shown to be uniquely dependent on crystallite size. The system exhibits the phenomenon of abnormal grain growth (AGG) during sintering with abrupt increase in the grain size from ~ 1 micron to ~ 10 microns. The large sized free crystallites (10 microns) exhibit pure tetragonal phase. Phase coexistence sets in after reducing the size to ~ 1 micron. These results prove that size, and not the internal stress, as the controlling mechanism for stabilizing phase coexistence in this system.
△ Less
Submitted 18 July, 2015;
originally announced July 2015.
-
Electric field induced irreversible transformation to the R3c phase and its influence on the giant piezo-strain behaviour of lead-free system- Na0.5Bi0.5TiO3-BaTiO3-K0.5Na0.5NbO3
Authors:
Dipak Kumar Khatua,
Anatoliy Senyshyn,
Rajeev Ranjan
Abstract:
A systematic study of the structural, dielectric and piezoelectric behavior of NBT-BT-KNN.
A systematic study of the structural, dielectric and piezoelectric behavior of NBT-BT-KNN.
△ Less
Submitted 2 July, 2015;
originally announced July 2015.
-
Growth Stress Induced Tunability of Dielectric Constant in Thin Films
Authors:
K. V. L. V. Narayanachari,
Hareesh Chandrasekar,
Amiya Banerjee,
K. B. R. Varma,
Rajeev Ranjan,
Navakanta Bhat,
Srinivasan Raghavan
Abstract:
It is demonstrated here that growth stress has a substantial effect on the dielectric constant of zirconia thin films. The correct combination of parameters - phase, texture and stress - is shown to yield films with high dielectric constant and best reported equivalent oxide thickness of 0.8 nm. The stress effect on dielectric constant is twofold, firstly, by the effect on phase transitions and se…
▽ More
It is demonstrated here that growth stress has a substantial effect on the dielectric constant of zirconia thin films. The correct combination of parameters - phase, texture and stress - is shown to yield films with high dielectric constant and best reported equivalent oxide thickness of 0.8 nm. The stress effect on dielectric constant is twofold, firstly, by the effect on phase transitions and secondly by the effect on interatomic distances. We discuss and explain the physical mechanisms involved in the interplay between the stress, phase changes and the dielectric constant in detail.
△ Less
Submitted 28 March, 2015;
originally announced March 2015.
-
Monoclinic (Mc) phase and electric field induced phase transformation in BaTiO3
Authors:
Ajay Kumar Kalyani,
Dipak Khatua,
B. Loukya,
Ranjan Datta,
Andy N. Fitch,
Anatoliy Senyshyn,
Rajeev Ranjan
Abstract:
For decades it has been a well-known fact that among the few ferroelectric compounds in the perovskite family namely BaTiO3, KNbO3, PbTiO3 Na1/2Bi1/2TiO3 the dielectric and piezoelectric properties of BaTiO3 is considerably higher than the others in polycrystalline form at room temperature. Further, similar to ferroelectric alloys exhibiting morphotropic phase boundary, single crystals of BaTiO3 e…
▽ More
For decades it has been a well-known fact that among the few ferroelectric compounds in the perovskite family namely BaTiO3, KNbO3, PbTiO3 Na1/2Bi1/2TiO3 the dielectric and piezoelectric properties of BaTiO3 is considerably higher than the others in polycrystalline form at room temperature. Further, similar to ferroelectric alloys exhibiting morphotropic phase boundary, single crystals of BaTiO3 exhibits anomalously large piezoelectric response when poled away from the direction of spontaneous polarization at room temperature. These anomalous features in BaTiO3 remained unexplained so far from the structural stand point. In this work we have used high resolution synchrotron X-ray powder diffraction, atomic resolution aberration corrected transmission electron microscopy, in conjunction with a novel powder poling technique, to reveal that (i) the equilibrium state of BaTiO3 is characterized by coexistence of a subtle monoclinic (Mc) phase and tetragonal phase, and (ii) strong electric field induces an orthorhombic phase at 300 K. These results suggest that BaTiO3 at room temperature is within an instability regime, and that this instability is therefore the fundamental factor responsible for the anomalous dielectric and piezoelectric properties of BaTiO3 as compared to the other homologous ferroelectric perovskite compounds. The results demonstrate that pure BaTiO3 at room temperature more akin to lead-based ferroelectric alloys close to the morphotropic phase boundary where polarization rotation and field induced ferroelectric-ferroelectric phase transformations play fundamental role in influencing the piezoelectric behavior.
△ Less
Submitted 5 September, 2014;
originally announced September 2014.
-
Dielectric Investigation, Piezoelectric Measurement and Structural Studies of Strontium-doped, modified PMS-PZT Piezoelectric Ceramics
Authors:
Kumar Brajesh,
Rajyavardhan Ray,
A. K. Himanshu,
Yashwant Kumar,
Rajeev Ranjan,
N. K. Singh,
S. K. Bandyopadhayay,
T P Sinha
Abstract:
The structure and dielectric properties of 6% $\rm{Sr}^{2+}$-substituted, modified Lead Zirconium Titanate (PZT) piezoelectric ceramic, with composition $[\rm{Pb}_{0.94}\rm{Sr}_{0.06}][(\rm{Mn}_{1/3}\rm{Sb}_{2/3})_{0.05}(\rm{Zr}_{0.54}\rm{Ti}_{0.46})_{0.95}]O_3$ and lead manganese antimonite as an additional dopant, synthesized by ceramic route have been investigated in a frequency range from 50Hz…
▽ More
The structure and dielectric properties of 6% $\rm{Sr}^{2+}$-substituted, modified Lead Zirconium Titanate (PZT) piezoelectric ceramic, with composition $[\rm{Pb}_{0.94}\rm{Sr}_{0.06}][(\rm{Mn}_{1/3}\rm{Sb}_{2/3})_{0.05}(\rm{Zr}_{0.54}\rm{Ti}_{0.46})_{0.95}]O_3$ and lead manganese antimonite as an additional dopant, synthesized by ceramic route have been investigated in a frequency range from 50Hz to 1MHz and in a temperature range between room temperature and 633K. The scanning electron micrograph of the sample taken at the room temperature confirms the formation of a fairly homogenous structure and well-formed grains with sharp boundaries. From the Rietveld analysis, it was found that the structure of the material is tetragonal with space group P4mm. The scaling behavior of imaginary part of the electric modulus suggests that the relaxation is described by the same mechanism at various temperatures. The values of the electromechanical coupling factor ($\rm{k_p}$), the high mechanical quality factor ($\rm{Q_m}$) and the piezoelectric coefficient ($\rm{d}_{33}$) of the synthesized sintered & poled ceramics gives a good set of values for the piezoelectric properties when compared with related materials, useful for various interesting piezoelectric device applications.
△ Less
Submitted 26 September, 2013;
originally announced September 2013.
-
Giant adiabatic spin torque in magnetic tunnel junctions with a hybrid free layer structure
Authors:
Xiaofeng Yao,
Yisong Zhang,
Andrew Lyle,
Roger Malmhall,
Rajiv Ranjan,
Lei Lu,
Mingzhong Wu,
Hao Wang,
Ying Jing,
Jian-Ping Wang
Abstract:
The discovery of spin torque transfer (STT) has lead to a significant advance in the development of spintronic devices. Novel structures and materials have been studied in order to improve the performance of the magnetic tunnel junctions (MTJs) performances and understand the fundamental physics in spin torque transfer. The adiabatic spin torque effect, which is due to the spatial non-uniformity…
▽ More
The discovery of spin torque transfer (STT) has lead to a significant advance in the development of spintronic devices. Novel structures and materials have been studied in order to improve the performance of the magnetic tunnel junctions (MTJs) performances and understand the fundamental physics in spin torque transfer. The adiabatic spin torque effect, which is due to the spatial non-uniformity of magnetic properties, has been predicted in theory and demonstrated experimentally in magnetic nanowires. However, this important spin torque has been rarely concerned in the magnetic tunnel junctions (MTJ) because of its extremely weak effect in conventional MTJs. This paper reports for the first time a giant adiabatic spin torque in MTJ devices with a hybrid free layer structure. The generation of the giant adiabatic spin torque was realized through the introduction of a spatial magnetic non-uniformity in a hybrid free layer along the current direction. It is observed that the giant adiabatic spin torque can substantially promote the current-induced switching process in the MTJ devices: the adiabatic spin torque can be larger than the in-plane spin torque, which allows for the switching with a single-polar current under different bias fields. Moreover, the adiabatic spin torque, which is proportional to the level of spatial non-uniformity, increases during the switching process. The observed effects are confirmed by numerical simulations. These results have far-reaching implications for the future of high-density STT-MRAM devices.
△ Less
Submitted 21 August, 2009;
originally announced August 2009.
-
Anomalous lattice expansion of RuSr2Eu1.5Ce0.5Cu2O10(Ru-1222) magneto superconductor: A low temperature X-ray diffraction study
Authors:
V. P. S. Awana,
Rajeev Ranjan,
Rajeev Rawat,
L. S. Sharath Chandra,
M. Peurla,
V. Ganesan,
H. Kishan,
D. Pandey,
R. Laiho,
E. Takayama-Muromachi,
A. V. Narlikar
Abstract:
This is the first report of the observation of the onset of excess volume and also of the strain along the a-axis near the magnetic ordering temperature in Ru-1222 superconductor, and indicates a coupling between the lattice and the magnetism in this system. Magnetization, magneto transport and thermoelectric power measurements being carried out on the same sample are also reported.
This is the first report of the observation of the onset of excess volume and also of the strain along the a-axis near the magnetic ordering temperature in Ru-1222 superconductor, and indicates a coupling between the lattice and the magnetism in this system. Magnetization, magneto transport and thermoelectric power measurements being carried out on the same sample are also reported.
△ Less
Submitted 26 April, 2006;
originally announced April 2006.
-
A Comparison of the Cc and R3c Space Groups for the Superlattice Phase of Pb(Zr0.52Ti0.48)O3
Authors:
Ragini,
Akhilesh Kumar Singh,
Rajeev Ranjan,
Dhananjai Pandey
Abstract:
Recent controversy about the space group of the low temperature superlattice phase of Pb(Zr0.52Ti0.48)O3 is settled. It is shown that the R3c space group for the superlattice phase cannot correctly account for the peak positions of the superlattice reflections present in the neutron diffraction patterns. The correct space group is reconfirmed to be Cc. A comparison of the atomic coordinates of C…
▽ More
Recent controversy about the space group of the low temperature superlattice phase of Pb(Zr0.52Ti0.48)O3 is settled. It is shown that the R3c space group for the superlattice phase cannot correctly account for the peak positions of the superlattice reflections present in the neutron diffraction patterns. The correct space group is reconfirmed to be Cc. A comparison of the atomic coordinates of Cc and Cm space groups is also presented to show that in the absence of superlattice reflections, as is the case with XRD data, one would land up in the Cm space group. This superlattice phase is found to coexist with another monoclinic phase of Cm space group.
△ Less
Submitted 30 July, 2004;
originally announced July 2004.
