-
First principles studies of the electronic and structural properties of the rutile VO$_{2}$(110) surface and its oxygen-rich terminations
Authors:
Jakub Planer,
Florian Mittendorfer,
Josef Redinger
Abstract:
We present a Density Functional Theory (DFT) study of the structural and electronic properties of bare rutile VO$_{2}$(110) surfaces and its oxygen-rich terminations. We discuss the performance of various DFT functionals, including PBE, PBE+U (U = 2 eV), SCAN and SCAN+rVV functionals with non-magnetic and ferromagnetic spin ordering. We predict the presence of a ring-like termination that is elect…
▽ More
We present a Density Functional Theory (DFT) study of the structural and electronic properties of bare rutile VO$_{2}$(110) surfaces and its oxygen-rich terminations. We discuss the performance of various DFT functionals, including PBE, PBE+U (U = 2 eV), SCAN and SCAN+rVV functionals with non-magnetic and ferromagnetic spin ordering. We predict the presence of a ring-like termination that is electronically and structurally related to a V$_{2}$O$_{5}$(001) monolayer and shows a higher stability than pure oxygen adsorption phases. Despite the fact that the calculated phase stabilities depend on the chosen functional, our results show that employing the spin-polarized SCAN functional offers a good compromise yielding both a reasonable description of the structural and electronic properties of the rutile VO$_{2}$ bulk phase and the enthalpy of formation for different stages of vanadium oxidation.
△ Less
Submitted 16 July, 2021;
originally announced July 2021.
-
An oxygen-rich, tetrahedral surface phase on high-temperature rutile VO$_2$(110)$_\text{T}$ single crystals
Authors:
Margareta Wagner,
Jakub Planer,
Bettina S. J. Heller,
Jens Langer,
Andreas Limbeck,
Lynn A. Boatner,
Hans-Peter Steinrück,
Josef Redinger,
Florian Maier,
Florian Mittendorfer,
Michael Schmid,
Ulrike Diebold
Abstract:
Vanadium dioxide undergoes a metal-insulator transition (MIT) from an insulating (monoclinic) to a metallic (tetragonal) phase close to room temperature, which makes it a promising functional material for many applications, e.g. as chemical sensors. Not much is known about its surface and interface properties, although these are critical in many of its applications. This work presents an atomic-sc…
▽ More
Vanadium dioxide undergoes a metal-insulator transition (MIT) from an insulating (monoclinic) to a metallic (tetragonal) phase close to room temperature, which makes it a promising functional material for many applications, e.g. as chemical sensors. Not much is known about its surface and interface properties, although these are critical in many of its applications. This work presents an atomic-scale investigation of the tetragonal rutile VO$_2$(110)$_\text{T}$ single-crystal surface and reports results obtained with scanning tunneling microscopy (STM), low-energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS), supported by density-functional theory-based (DFT) calculations. The surface reconstructs into an oxygen-rich (2$\times$2) superstructure that coexists with small patches of the underlying, unreconstructed (110)-(1$\times$1) surface. The best structural model for the (2$\times$2) surface termination, conceptually derived from a vanadium pentoxide (001) monolayer, consists of rings of corner-shared tetrahedra. Over a wide range of oxygen chemical potentials this reconstruction is more stable than the unreconstructed (110) surface as well as models proposed in the literature.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Adsorption and Intermolecular Interaction of Cobalt Phthalocyanine on CoO(111) Ultrathin Films: An STM and DFT Study
Authors:
Tobias Schmitt,
Pascal Ferstl,
Lutz Hammer,
M. Alexander Schneider,
Josef Redinger
Abstract:
We investigate the adsorption of cobalt phthalocyanine (CoPc) molecules on a thin layer of cobalt oxide grown on Ir(100). To that end we compare the results of low-temperature scanning tunneling microscopy (STM) with those of ab-initio density functional theory (DFT) calculations and reveal the adsorption geometry. We find that the CoPc molecules lie flat on the surface and that their central coba…
▽ More
We investigate the adsorption of cobalt phthalocyanine (CoPc) molecules on a thin layer of cobalt oxide grown on Ir(100). To that end we compare the results of low-temperature scanning tunneling microscopy (STM) with those of ab-initio density functional theory (DFT) calculations and reveal the adsorption geometry. We find that the CoPc molecules lie flat on the surface and that their central cobalt atom forms a chemical bond to a substrate oxygen ion. However, this bond contributes only modestly to the adsorption energy, while van-der-Waals forces dominate the potential landscape and determine to a large extend the geometry as well as the distortion of substrate and molecule. Furthermore they lead to attractive molecule-molecule interactions at higher molecular coverages. The DFT calculations predict energetic positions of the molecular orbitals which are compared to scanning tunneling spectroscopy (STS) measurements.
△ Less
Submitted 23 October, 2018;
originally announced October 2018.
-
Monatomic Co, CoO$_2$, and CoO$_3$ Nanowires on Ir(100) and Pt(100) surfaces: Formation, Structure, and Energetics
Authors:
P. Ferstl,
F. Mittendorfer,
J. Redinger,
M. A. Schneider,
L. Hammer
Abstract:
In this study we investigate the structural and chemical changes of monatomic CoO$_2$ chains grown self-organized on the Ir(100) surface [P. Ferstl et al., PRL 117, 2016, 046101] and on Pt(100) under reducing and oxidizing conditions. By a combination of quantitative low-energy electron diffraction, scanning tunnelling microscopy, and density functional theory we show that the cobalt oxide wires a…
▽ More
In this study we investigate the structural and chemical changes of monatomic CoO$_2$ chains grown self-organized on the Ir(100) surface [P. Ferstl et al., PRL 117, 2016, 046101] and on Pt(100) under reducing and oxidizing conditions. By a combination of quantitative low-energy electron diffraction, scanning tunnelling microscopy, and density functional theory we show that the cobalt oxide wires are completely reduced by H$_2$ at temperatures above 320 K and a 3x1 ordered Ir$_2$Co or Pt$_2$Co surface alloy is formed. Depending on temperature the surface alloy on Ir(100) is either hydrogen covered (T < 400 K) or clean and eventually undergoes an irreversible order-disorder transition at about 570 K. The Pt$_2$Co surface alloy disorders with the desorption of hydrogen, whereby Co submerges into subsurface sites. Vice versa, applying stronger oxidants than O$_2$ such as NO$_2$ leads to the formation of CoO3 chains on Ir(100) in a 3x1 superstructure. On Pt(100) such a CoO$_3$ phase could not be prepared so far, which however, is due to the UHV conditions of our experiments. As revealed by theory this phase will become stable in a regime of higher pressure. In general, the structures can be reversibly switched on both surfaces using the respective agents O$_2$, NO$_2$ and H$_2$.
△ Less
Submitted 19 October, 2018;
originally announced October 2018.
-
Adsorption of CO on the Ca3Ru2O7(001) surface
Authors:
Wernfried Mayr-Schmölzer,
Daniel Halwidl,
Florian Mittendorfer,
Michael Schmid,
Ulrike Diebold,
Josef Redinger
Abstract:
The adsorption of CO molecules at the Ca3Ru2O7(001) surface was studied using low-temperature scanning tunneling microscopy (STM) and density functional theory (DFT). Ca3Ru2O7 can be easily cleaved along the (001) plane, yielding a smooth, CaO-terminated surface. The STM shows a characteristic pattern with alternating dark and bright stripes, resulting from the tilting of the RuO$_6$ octahedra.…
▽ More
The adsorption of CO molecules at the Ca3Ru2O7(001) surface was studied using low-temperature scanning tunneling microscopy (STM) and density functional theory (DFT). Ca3Ru2O7 can be easily cleaved along the (001) plane, yielding a smooth, CaO-terminated surface. The STM shows a characteristic pattern with alternating dark and bright stripes, resulting from the tilting of the RuO$_6$ octahedra.
At 78,K, CO adsorbs at an apical surface O at the channel edge with a predicted binding energy of $E_{ads} = -0.85$eV. After annealing at room temperature, the CO forms a strong bond ($E_{ads}= -2.04$eV) with the apical O and the resulting carboxylate takes the place of the former surface O. This carboxylate can be decomposed by scanning the surface with a high sample bias voltage of +2.7V, restoring the original surface.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
Adsorption of a superoxo O2- species on the pure an Ca doped Sr3Ru2O7(001) surface
Authors:
Wernfried Mayr-Schmölzer,
Florian Mittendorfer,
Josef Redinger
Abstract:
Only recently, the activation of oxygen molecules on clean defect-free transition metal oxide surfaces has been reported, for example on the CaO-terminated surface of the Ruddelsden-Popper perovskite \crosurf. In this work we show that oxygen molecules adsorb as an activated superoxo species on a clean SrO-terminated surface of \srosurf. At all coverages, the electrons activating the molecule orig…
▽ More
Only recently, the activation of oxygen molecules on clean defect-free transition metal oxide surfaces has been reported, for example on the CaO-terminated surface of the Ruddelsden-Popper perovskite \crosurf. In this work we show that oxygen molecules adsorb as an activated superoxo species on a clean SrO-terminated surface of \srosurf. At all coverages, the electrons activating the molecule originate from the subsurface RuO$_2$ layer. At low coverages, the presence of a Ca dopant in the terminating SrO layer slightly increases the adsorption energy. At high coverage, DFT predicts a flat potential energy surface and a preferred adsorption of the \oom\ near surface cations. Advanced many-electron calculations (RPA) predict adsorption energies of $-0.99$\,eV and $-0.49$\,eV per \oom~molecule for low and high coverages, respectively, and a preference for forming line-like structures in the latter case.
△ Less
Submitted 2 October, 2018;
originally announced October 2018.
-
Adsorption of water at the SrO surface of ruthenates
Authors:
Daniel Halwidl,
Bernhard Stöger,
Wernfried Mayr-Schmölzer,
Jiri Pavelec,
David Fobes,
Jin Peng,
Zhiqiang Mao,
Gareth S. Parkinson,
Michael Schmid,
Florian Mittendorfer,
Josef Redinger,
Ulrike Diebold
Abstract:
Although perovskite oxides hold promise in applications ranging from solid oxide fuel cells to catalysts, their surface chemistry is poorly understood at the molecular level. Here we follow the formation of the first monolayer of water at the (001) surfaces of Sr$_{n+1}$Ru$_n$O$_{3n+1}$ ($n$ = 1, 2) using low-temperature scanning tunnelling microscopy, X-ray photoelectron spectroscopy, and density…
▽ More
Although perovskite oxides hold promise in applications ranging from solid oxide fuel cells to catalysts, their surface chemistry is poorly understood at the molecular level. Here we follow the formation of the first monolayer of water at the (001) surfaces of Sr$_{n+1}$Ru$_n$O$_{3n+1}$ ($n$ = 1, 2) using low-temperature scanning tunnelling microscopy, X-ray photoelectron spectroscopy, and density functional theory. These layered perovskites cleave between neighbouring SrO planes, yielding almost ideal, rocksalt-like surfaces. An adsorbed monomer dissociates and forms a pair of hydroxide ions. The OH stemming from the original molecule stays trapped at Sr-Sr bridge positions, circling the surface OH with a measured activation energy of 187 $\pm$ 10 meV. At higher coverage, dimers of dissociated water assemble into one-dimensional chains and form a percolating network where water adsorbs molecularly in the gaps. Our work shows the limitations of applying surface chemistry concepts derived for binary rocksalt oxides to perovskites.
△ Less
Submitted 16 April, 2018;
originally announced April 2018.
-
High chemical activity of a perovskite surface: reaction of CO with Sr$_3$Ru$_2$O$_7$
Authors:
Bernhard Stöger,
Marcel Hieckel,
Florian Mittendorfer,
Zhiming Wang,
David Fobes,
Jin Peng,
Zhiqiang Mao,
Michael Schmid,
Josef Redinger,
Ulrike Diebold
Abstract:
Adsorption of CO at the Sr$_3$Ru$_2$O$_7$(001) surface was studied with low-temperature scanning tunneling microscopy (STM) and density functional theory. In situ cleaved single crystals terminate in an almost perfect SrO surface. At 78 K, CO first populates impurities and then adsorbs above the apical surface O with a binding energy E$_\mathrm{ads}$=-0.7 eV. Above 100 K, this physisorbed CO repla…
▽ More
Adsorption of CO at the Sr$_3$Ru$_2$O$_7$(001) surface was studied with low-temperature scanning tunneling microscopy (STM) and density functional theory. In situ cleaved single crystals terminate in an almost perfect SrO surface. At 78 K, CO first populates impurities and then adsorbs above the apical surface O with a binding energy E$_\mathrm{ads}$=-0.7 eV. Above 100 K, this physisorbed CO replaces the surface O, forming a bent CO2 with the C end bound to the Ru underneath. The resulting metal carboxylate (Ru-COO) can be desorbed by STM manipulation. A low activation (0.2 eV) and high binding (-2.2 eV) energy confirm a strong reaction between CO and regular surface sites of Sr$_3$Ru$_2$O$_7$; likely, this reaction causes the "UHV aging effect" reported for this and other perovskite oxides.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Point defects at cleaved Sr$_{n+1}$Ru$_n$O$_{3n+1}$(001) surfaces
Authors:
Bernhard Stöger,
Marcel Hieckel,
Florian Mittendorfer,
Zhiming Wang,
Michael Schmid,
Gareth S. Parkinson,
David Fobes,
Jin Peng,
John. E. Ortmann,
Andreas Limbeck,
Zhiqiang Mao,
Josef Redinger,
Ulrike Diebold
Abstract:
The (001) surfaces of cleaved Sr$_3$Ru$_2$O$_7$ and Sr$_2$RuO$_4$ samples were investigated using low-temperature scanning tunneling microscopy and density functional theory calculations. Intrinsic defects are not created during cleaving. This experimental observation is consistent with calculations, where the formation energy for a Sr and O vacancy, 4.19 eV and 3.81 eV, respectively, is significa…
▽ More
The (001) surfaces of cleaved Sr$_3$Ru$_2$O$_7$ and Sr$_2$RuO$_4$ samples were investigated using low-temperature scanning tunneling microscopy and density functional theory calculations. Intrinsic defects are not created during cleaving. This experimental observation is consistent with calculations, where the formation energy for a Sr and O vacancy, 4.19 eV and 3.81 eV, respectively, is significantly larger than that required to cleave the crystal, 1.11 eV/(1 $\times$ 1) unit cell. Surface oxygen vacancies can be created through electron bombardment, however, and their appearance is shown to vary strongly with the imaging conditions. Point defects observed on as-cleaved surfaces result from bulk impurities and adsorption from the residual gas.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Pt$_3$Zr(0001): A substrate for growing well-ordered ultrathin zirconia films by oxidation
Authors:
Moritz Antlanger,
Wernfried Mayr-Schmölzer,
Jiří Pavelec,
Florian Mittendorfer,
Josef Redinger,
Peter Varga,
Ulrike Diebold,
Michael Schmid
Abstract:
We have studied the surface of pure and oxidized Pt$_3$Zr(0001) by scanning tunneling microscopy (STM), Auger electron microscopy, and density functional theory (DFT). The well-annealed alloy surface shows perfect long-range chemical order. Occasional domain boundaries are probably caused by nonstoichiometry. Pt$_3$Zr exhibits ABAC stacking along [0001]; only the A-terminated surfaces are seen by…
▽ More
We have studied the surface of pure and oxidized Pt$_3$Zr(0001) by scanning tunneling microscopy (STM), Auger electron microscopy, and density functional theory (DFT). The well-annealed alloy surface shows perfect long-range chemical order. Occasional domain boundaries are probably caused by nonstoichiometry. Pt$_3$Zr exhibits ABAC stacking along [0001]; only the A-terminated surfaces are seen by STM, in agreement with DFT results showing a lower surface energy for the A termination. DFT further predicts a stronger inward relaxation of the surface Zr than for Pt, in spite of the larger atomic size of Zr. A closed ZrO$_2$ film is obtained by oxidation in $10^{-7}$ mbar O$_2$ at 400 $^\circ$C and post-annealing at $\approx 800 ^\circ$C. The oxide consists of an O-Zr-O trilayer, equivalent to a (111) trilayer of the fluorite structure of cubic ZrO$_2$, but contracted laterally. The oxide forms a $(\sqrt{19} \times \sqrt{19})$R23$^\circ$ superstructure. The first monolayer of the substrate consists of Pt and contracts, similar to the metastable reconstruction of pure Pt(111). DFT calculations show that the oxide trilayer binds rather weakly to the substrate. In spite of the O-terminated oxide, bonding to the substrate mainly occurs via the Zr atoms in the oxide, which strongly buckle down towards the Pt substrate atoms, if near a Pt position. According to DFT, the oxide has a bandgap; STM indicates that the conduction band minimum lies $\approx 2.3$ eV above $E_\mathrm{F}$.
△ Less
Submitted 12 April, 2018;
originally announced April 2018.
-
Suppression of material transfer at contacting surfaces: The effect of adsorbates on Al/TiN and Cu/diamond interfaces from first-principles calculations
Authors:
Gregor Feldbauer,
Michael Wolloch,
Pedro O. Bedolla,
Josef Redinger,
András Vernes,
Peter Mohn
Abstract:
The effect of monolayers of oxygen (O) and hydrogen (H) on the possibility of material transfer at aluminium/titanium nitride (Al/TiN) and copper/diamond (Cu/C$_{\text{dia}}$) interfaces, respectively, were investigated within the framework of density functional theory (DFT). To this end the approach, contact, and subsequent separation of two atomically flat surfaces consisting of the aforemention…
▽ More
The effect of monolayers of oxygen (O) and hydrogen (H) on the possibility of material transfer at aluminium/titanium nitride (Al/TiN) and copper/diamond (Cu/C$_{\text{dia}}$) interfaces, respectively, were investigated within the framework of density functional theory (DFT). To this end the approach, contact, and subsequent separation of two atomically flat surfaces consisting of the aforementioned pairs of materials were simulated. These calculations were performed for the clean as well as oxygenated and hydrogenated Al and C$_{\text{dia}}$ surfaces, respectively. Various contact configurations were considered by studying several lateral arrangements of the involved surfaces at the interface. Material transfer is typically possible at interfaces between the investigated clean surfaces; however, the addition of O to the Al and H to the C$_{\text{dia}}$ surfaces was found to hinder material transfer. This passivation occurs because of a significant reduction of the adhesion energy at the examined interfaces, which can be explained by the distinct bonding situations.
△ Less
Submitted 9 November, 2017; v1 submitted 29 March, 2017;
originally announced March 2017.
-
Impact of lattice dynamics on the phase stability of metamagnetic FeRh: Bulk and thin films
Authors:
Michael Wolloch,
Markus E. Gruner,
Werner Keune,
Peter Mohn,
Josef Redinger,
Florian Hofer,
Dieter Suess,
Raimund Podloucky,
Joachim Landers,
Soma Salamon,
Franziska Scheibel,
Detlef Spodding,
Ralf Witte,
Beatriz Roldan Cuenya,
Oliver Gutfleisch,
Michael Y. Hu,
Jiyong Zhao,
Thomas Toellner,
Ercan E. Alp,
Mario Siewert,
Peter Entel,
Rossitza Pentcheva,
Heiko Wende
Abstract:
We present phonon dispersions, element-resolved vibrational density of states (VDOS) and corresponding thermodynamic properties obtained by a combination of density functional theory (DFT) and nuclear resonant inelastic X-ray scattering (NRIXS) across the metamagnetic transition of B2 FeRh in the bulk material and thin epitaxial films. We see distinct differences in the VDOS of the antiferromagnet…
▽ More
We present phonon dispersions, element-resolved vibrational density of states (VDOS) and corresponding thermodynamic properties obtained by a combination of density functional theory (DFT) and nuclear resonant inelastic X-ray scattering (NRIXS) across the metamagnetic transition of B2 FeRh in the bulk material and thin epitaxial films. We see distinct differences in the VDOS of the antiferromagnetic (AF) and ferromagnetic (FM) phase which provide a microscopic proof of strong spin-phonon coupling in FeRh. The FM VDOS exhibits a particular sensitivity to the slight tetragonal distortions present in epitaxial films, which is not encountered in the AF phase. This results in a notable change in lattice entropy, which is important for the comparison between thin film and bulk results. Our calculations confirm the recently reported lattice instability in the AF phase. The imaginary frequencies at the $X$-point depend critically on the Fe magnetic moment and atomic volume. Analyzing these non vibrational modes leads to the discovery of a stable monoclinic ground state structure which is robustly predicted from DFT but not verified in our thin film experiments. Specific heat, entropy and free energy calculated within the quasiharmonic approximation suggest that the new phase is possibly suppressed because of its relatively smaller lattice entropy. In the bulk phase, lattice degrees of freedom contribute with the same sign and in similar magnitude to the isostructural AF-FM phase transition as the electronic and magnetic subsystems and therefore needs to be included in thermodynamic modeling.
△ Less
Submitted 15 August, 2016;
originally announced August 2016.
-
Ab-initio calculation of the real contact area on the atomic scale
Authors:
Michael Wolloch,
Gregor Feldbauer,
Peter Mohn,
Josef Redinger,
András Vernes
Abstract:
We present a novel approach to determine the onset of contact between a tip and a surface. The real contact area depending on the distance is calculated using Bader's quantum theory of atoms in molecules. The jump to contact, which is often observed in atomic force microscopy experiments, is used as an indicator for the initial point of contact, which in turn is defined by atomic relaxations and t…
▽ More
We present a novel approach to determine the onset of contact between a tip and a surface. The real contact area depending on the distance is calculated using Bader's quantum theory of atoms in molecules. The jump to contact, which is often observed in atomic force microscopy experiments, is used as an indicator for the initial point of contact, which in turn is defined by atomic relaxations and thus without the need of external parameters. Within our approach the contact area is estimated by evaluating the zero flux surfaces between the touching Bader-atoms, where the necessary electronic density cutoff for the Bader-partitioning is calculated to depend on the initial point of contact. Our proposed approach is therefore completely ab-initio and we are able to define and calculate the real area of contact without imposing restrictions or free parameters. As a prototype system we choose a tip made of a ten atom tungsten pyramid above a moiré layer of graphene on an fcc iridium (111) substrate. We find that the contact area depends exponentially on the effective distance between the tip apex and the surface atom directly below within the atomically relaxed nanosystem.
△ Less
Submitted 27 May, 2015;
originally announced May 2015.
-
Adhesion and material transfer between contacting Al and TiN surfaces from first principles
Authors:
Gregor Feldbauer,
Michael Wolloch,
Pedro O. Bedolla,
Peter Mohn,
Josef Redinger,
András Vernes
Abstract:
A series of density functional theory (DFT) simulations was performed to investigate the approach, contact, and subsequent separation of two atomically flat surfaces consisting of different materials. Aluminum (Al) and titanium nitride (TiN) slabs were chosen as a model system representing a metal-ceramic interface and the interaction between soft and hard materials. The approach and separation we…
▽ More
A series of density functional theory (DFT) simulations was performed to investigate the approach, contact, and subsequent separation of two atomically flat surfaces consisting of different materials. Aluminum (Al) and titanium nitride (TiN) slabs were chosen as a model system representing a metal-ceramic interface and the interaction between soft and hard materials. The approach and separation were simulated by moving one slab in discrete steps normal to the surfaces allowing for electronic and atomic relaxations after each step. Various configurations were analyzed by considering (001), (011), and (111) surfaces as well as several lateral arrangements of these surfaces at the interface. Several tests were conducted on the computational setup, for example, by changing the system size or using different approximations for the exchange correlation functional. The performed simulations revealed the influences of these aspects on adhesion, equilibrium distance, and material transfer. These interfacial properties depend sensitively on the chosen configuration due to distinct bond situations. Material transfer, in particular, was observed if the absolute value of the adhesion energy for a given configuration is larger than the energy cost to remove surface layers. This result was found to be independent of the employed exchange correlation functional. Furthermore, it was shown that a simple comparison of the surface energies of the slabs is not sufficient to predict the occurrence of material transfer.
△ Less
Submitted 23 April, 2015;
originally announced April 2015.
-
Ab-initio friction forces on the nanoscale: A DFT study of fcc Cu(111)
Authors:
Michael Wolloch,
Gregor Feldbauer,
Peter Mohn,
Josef Redinger,
András Vernes
Abstract:
While there are a number of models that tackle the problem of calculating friction forces on the atomic level, providing a completely parameter-free approach remains a challenge. Here we present a quasi-static model to obtain an approximation to the nanofrictional response of dry, wearless systems based on quantum mechanical all-electron calculations. We propose a mechanism to allow dissipative sl…
▽ More
While there are a number of models that tackle the problem of calculating friction forces on the atomic level, providing a completely parameter-free approach remains a challenge. Here we present a quasi-static model to obtain an approximation to the nanofrictional response of dry, wearless systems based on quantum mechanical all-electron calculations. We propose a mechanism to allow dissipative sliding, which relies on atomic relaxations. We define two different ways of calculating the mean nanofriction force, both leading to an exponential friction-versus-load behavior for all sliding directions. Since our approach does not impose any limits on lengths and directions of the sliding paths, we investigate arbitrary sliding directions for an fcc Cu(111) interface and detect two periodic paths which form the upper and lower bound of nanofriction. For long aperiodic paths the friction force convergences to a value in between these limits. For low loads we retrieve the Derjaguin generalization of Amontons-Coulomb kinetic friction law which appears to be valid all the way down to the nanoscale. We observe a non-vanishing Derjaguin-offset even for atomically flat surfaces in dry contact.
△ Less
Submitted 26 August, 2014;
originally announced August 2014.
-
Effects of van der Waals Interactions in the Adsorption of Isooctane and Ethanol on Fe(100) Surfaces
Authors:
Pedro O. Bedolla,
Gregor Feldbauer,
Michael Wolloch,
Stefan J. Eder,
Nicole Dörr,
Peter Mohn,
Josef Redinger,
András Vernes
Abstract:
Van der Waals (vdW) forces play a fundamental role in the structure and behavior of diverse systems. Thanks to development of functionals that include non-local correlation, it is possible to study the effects of vdW interactions in systems of industrial and tribological interest. Here we simulated within the framework of density functional theory (DFT) the adsorption of isooctane (2,2,4-trimethyl…
▽ More
Van der Waals (vdW) forces play a fundamental role in the structure and behavior of diverse systems. Thanks to development of functionals that include non-local correlation, it is possible to study the effects of vdW interactions in systems of industrial and tribological interest. Here we simulated within the framework of density functional theory (DFT) the adsorption of isooctane (2,2,4-trimethylpentane) and ethanol on a Fe(100) surface, employing various exchange-correlation functionals to take vdW forces into account. In particular, this paper discusses the effect of vdW forces on the magnitude of adsorption energies, equilibrium geometries and their role in the binding mechanism. According to our calculations, vdW interactions increase the adsorption energies and reduce the equilibrium distances. Nevertheless, they do not influence the spatial configuration of the adsorbed molecules. Their effect on the electronic density is a non-isotropic, delocalized accumulation of charge between the molecule and the slab. In conclusion, vdW forces are essential for the adsorption of isooctane and ethanol on a bcc Fe(100) surface.
△ Less
Submitted 15 May, 2014; v1 submitted 9 May, 2014;
originally announced May 2014.
-
Hybridization of Graphene and a Ag Monolayer Supported on Re(0001)
Authors:
M. Papagno,
P. Moras,
P. M. Sheverdyaeva,
J. Doppler,
A. Garhofer,
F. Mittendorfer,
J. Redinger,
C. Carbone
Abstract:
We have investigated the electronic structure of graphene supported on Re(0001) before and after the intercalation of one monolayer of Ag by means of angle-resolved photoemission spectroscopy measurements and density functional theory calculations. The intercalation of Ag reduces the graphene-Re interaction and modifies the electronic band structure of graphene. Although the linear dispersion of t…
▽ More
We have investigated the electronic structure of graphene supported on Re(0001) before and after the intercalation of one monolayer of Ag by means of angle-resolved photoemission spectroscopy measurements and density functional theory calculations. The intercalation of Ag reduces the graphene-Re interaction and modifies the electronic band structure of graphene. Although the linear dispersion of the π state of graphene in proximity of the Fermi level highlights a rather weak graphene-noble metal layer interaction, we still observe a significant hybridization between the Ag bands and the π state in lower energy regions. These results demonstrate that covering a surface with a noble metal layer does decouple the electronic states, but still leads to a noticeable change in the electronic structure of graphene.
△ Less
Submitted 17 January, 2014;
originally announced January 2014.
-
One-dimensional magnetism in one-dimensional metallic chains in bulk MnB4
Authors:
S. Khmelevskyi,
J. Redinger,
A. B. Shick,
P. Mohn
Abstract:
We have investigated from first-principles an electronic structure and magnetism in MnB4 compound with experimentally observed orthorhombic C12/m1 structure. It is found that Mn tetra-borides (MnB4) is found to have metallic ground state with well defined local Mn magnetic moments. This conclusion was drawn from calculation within full potential Linear Augmented Plane Wave method and Korringa-Kohn…
▽ More
We have investigated from first-principles an electronic structure and magnetism in MnB4 compound with experimentally observed orthorhombic C12/m1 structure. It is found that Mn tetra-borides (MnB4) is found to have metallic ground state with well defined local Mn magnetic moments. This conclusion was drawn from calculation within full potential Linear Augmented Plane Wave method and Korringa-Kohn-Rostocker method using Disordered Local Moment Approximation. We have shown using Lichtenstein Green function method that magnetic exchange interactions between Mn moments are strongly ferromagnetic along 1D-chains of Mn atoms and they are practically vanishing between the chains. The metallic state appears to exhibit a strongly one-dimensional character since the single metallic band show dispersion only in one reciprocal lattice dimension. Thus it appears that MnB4 may be a perfect one-dimensional one-band Hubbard model system. Although LSDA predicts the magnetism in this system it may well be superconductor at low temperatures due to the correlation effects beyond mean field like approach.
△ Less
Submitted 21 November, 2013;
originally announced November 2013.
-
The influence of oxygen and hydrogen adsorption on the magnetic structure of the ultrathin iron film on the Ir(001) surface
Authors:
Frantisek Maca,
Josef Kudrnovsky,
Vaclav Drchal,
Josef Redinger
Abstract:
We present a detailed ab initio study of the electronic structure and magnetic order of an Fe monolayer on the Ir(001) surface covered by adsorbed oxygen and hydrogen. The results are compared to the clean Fe/Ir(001) system, where recent intensive studies indicated a strong tendency towards an antiferromagnetic order and complex magnetic structures. The adsorption of an oxygen overlayer significan…
▽ More
We present a detailed ab initio study of the electronic structure and magnetic order of an Fe monolayer on the Ir(001) surface covered by adsorbed oxygen and hydrogen. The results are compared to the clean Fe/Ir(001) system, where recent intensive studies indicated a strong tendency towards an antiferromagnetic order and complex magnetic structures. The adsorption of an oxygen overlayer significantly increases interlayer distance between the Fe layer and the Ir substrate, while the effect of hydrogen is much weaker. We show that the adsorption of oxygen (and also of hydrogen) leads to a p(2$\times $1) antiferromagnetic order of the Fe moments, which is also supported by an investigation based on a disordered local moment state. Simulated scanning tunneling images using the simple Tersoff-Hamann model hint that the proposed p(2$\times $1) antiferromagnetic order could be detected even by non-magnetic tips.
△ Less
Submitted 25 June, 2013;
originally announced June 2013.
-
An Artificially Lattice Mismatched Graphene/Metal Interface: Graphene/Ni/Ir(111)
Authors:
D. Pacilé,
P. Leicht,
M. Papagno,
P. M. Sheverdyaeva,
P. Moras,
C. Carbone,
K. Krausert,
L. Zielke,
M. Fonin,
Y. S. Dedkov,
F. Mittendorfer,
J. Doppler,
A. Garhofer,
J. Redinger
Abstract:
We report the structural and electronic properties of an artificial graphene/Ni(111) system obtained by the intercalation of a monoatomic layer of Ni in graphene/Ir(111). Upon intercalation, Ni grows epitaxially on Ir(111), resulting in a lattice mismatched graphene/Ni system. By performing Scanning Tunneling Microscopy (STM) measurements and Density Functional Theory (DFT) calculations, we show t…
▽ More
We report the structural and electronic properties of an artificial graphene/Ni(111) system obtained by the intercalation of a monoatomic layer of Ni in graphene/Ir(111). Upon intercalation, Ni grows epitaxially on Ir(111), resulting in a lattice mismatched graphene/Ni system. By performing Scanning Tunneling Microscopy (STM) measurements and Density Functional Theory (DFT) calculations, we show that the intercalated Ni layer leads to a pronounced buckling of the graphene film. At the same time an enhanced interaction is measured by Angle-Resolved Photo-Emission Spectroscopy (ARPES), showing a clear transition from a nearly-undisturbed to a strongly-hybridized graphene $π$-band. A comparison of the intercalation-like graphene system with flat graphene on bulk Ni(111), and mildly corrugated graphene on Ir(111), allows to disentangle the two key properties which lead to the observed increased interaction, namely lattice matching and electronic interaction. Although the latter determines the strength of the hybridization, we find an important influence of the local carbon configuration resulting from the lattice mismatch.
△ Less
Submitted 7 January, 2013;
originally announced January 2013.
-
Strain and structure driven complex magnetic ordering of a CoO overlayer on Ir(100)
Authors:
F. Mittendorfer,
M. Weinert,
R. Podloucky,
J. Redinger
Abstract:
We have investigated the magnetic ordering in the ultrathin c(10$\times$2) CoO(111) film supported on Ir(100) on the basis of ab-initio calculations. We find a close relationship between the local structural properties of the oxide film and the induced magnetic order, leading to alternating ferromagnetically and anti-ferromagnetically ordered segments. While the local magnetic order is directly re…
▽ More
We have investigated the magnetic ordering in the ultrathin c(10$\times$2) CoO(111) film supported on Ir(100) on the basis of ab-initio calculations. We find a close relationship between the local structural properties of the oxide film and the induced magnetic order, leading to alternating ferromagnetically and anti-ferromagnetically ordered segments. While the local magnetic order is directly related to the geometric position of the Co atoms, the mismatch between the CoO film and the Ir substrate leads to a complex long-range order of the oxide.
△ Less
Submitted 2 May, 2012;
originally announced May 2012.
-
Substrate-induced antiferromagnetism of an Fe monolayer on the Ir(001) surface
Authors:
Josef Kudrnovsky,
Frantisek Maca,
Ilja Turek,
Josef Redinger
Abstract:
We present detailed ab initio study of structural and magnetic stability of a Fe-monolayer on the fcc(001) surface of iridium. The Fe-monolayer has a strong tendency to order antiferromagnetically for the true relaxed geometry. On the contrary an unrelaxed Fe/Ir(001) sample has a ferromagnetic ground state. The antiferromagnetism is thus stabilized by the decreased Fe-Ir layer spacing in strikin…
▽ More
We present detailed ab initio study of structural and magnetic stability of a Fe-monolayer on the fcc(001) surface of iridium. The Fe-monolayer has a strong tendency to order antiferromagnetically for the true relaxed geometry. On the contrary an unrelaxed Fe/Ir(001) sample has a ferromagnetic ground state. The antiferromagnetism is thus stabilized by the decreased Fe-Ir layer spacing in striking contrast to the recently experimentally observed antiferromagnetism of the Fe/W(001) system which exists also for an ideal bulk-truncated, unrelaxed geometry. The calculated layer relaxations for Fe/Ir(001) agree reasonably well with recent experimental LEED data. The present study centers around the evaluation of pair exchange interactions between Fe-atoms in the Fe-overlayer as a function of the Fe/Ir interlayer distance which allows for a detailed understanding of the antiferromagnetism of a Fe/Ir(001) overlayer. Furthermore, our calculations indicate that the nature of the true ground state could be more complex and display a spin spiral-like rather than a c(2x2)-antiferromagnetic order. Finally, the magnetic stability of the Fe monolayer on the Ir(001) surface is compared to the closely related Fe/Rh(001) system.
△ Less
Submitted 21 July, 2009;
originally announced July 2009.
-
Chemical ordering and composition fluctuations at the (001) surface of the Fe-Ni Invar alloy
Authors:
M. Ondracek,
F. Maca,
J. Kudrnovsky,
J. Redinger,
A. Biedermann,
C. Fritscher,
M. Schmid,
P. Varga
Abstract:
We report on a study of (001) oriented fcc Fe-Ni alloy surfaces which combines first-principles calculations and low-temperature STM experiments. Density functional theory calculations show that Fe-Ni alloy surfaces are buckled with the Fe atoms slightly shifted outwards and the Ni atoms inwards. This is consistent with the observation that the atoms in the surface layer can be chemically distin…
▽ More
We report on a study of (001) oriented fcc Fe-Ni alloy surfaces which combines first-principles calculations and low-temperature STM experiments. Density functional theory calculations show that Fe-Ni alloy surfaces are buckled with the Fe atoms slightly shifted outwards and the Ni atoms inwards. This is consistent with the observation that the atoms in the surface layer can be chemically distinguished in the STM image: brighter spots (corrugation maxima with increased apparent height) indicate iron atoms, darker ones nickel atoms. This chemical contrast reveals a c2x2 chemical order (50% Fe) with frequent Fe-rich defects on Invar alloy surface. The calculations also indicate that subsurface composition fluctuations may additionally modulate the apparent height of the surface atoms. The STM images show that this effect is pronounced compared to the surfaces of other disordered alloys, which suggests that some chemical order and corresponding concentration fluctuations exist also in the subsurface layers of Invar alloy. In addition, detailed electronic structure calculations allow us to identify the nature of a distinct peak below the Fermi level observed in the tunneling spectra. This peak corresponds to a surface resonance band which is particularly pronounced in iron-rich surface regions and provides a second type of chemical contrast with less spatial resolution but one that is essentially independent of the subsurface composition.
△ Less
Submitted 11 December, 2006;
originally announced December 2006.
-
The influence of hydrogen adsorption on magnetic properties of Ni/Cu(001) surface
Authors:
František Máca,
Alexander B. Shick,
Josef Redinger,
Raimund Podloucky,
Peter Weinberger
Abstract:
Ni/Cu(001) is known as a unique system showing the spin-reorientation transition from an in-plane to out-of-plane magnetization direction when the Ni-overlayer thickness is increased. We investigate different relaxed multilayer structures with a hydrogen adlayer using the full-potential linearized augmented plane-wave method. The relaxed geometries, determined by total energy and atomic force ca…
▽ More
Ni/Cu(001) is known as a unique system showing the spin-reorientation transition from an in-plane to out-of-plane magnetization direction when the Ni-overlayer thickness is increased. We investigate different relaxed multilayer structures with a hydrogen adlayer using the full-potential linearized augmented plane-wave method. The relaxed geometries, determined by total energy and atomic force calculations, show that H-monolayer strongly influences the interlayer distance between the Ni-surface and sub-surface layers yielding the outward relaxation of Ni-layer at H/Ni interface. Furthermore, large decrease of local magnetic moments at the top surface area is found for the surface covered by H. The magneto-crystalline anisotropy energies calculated for fully relaxed H/Ni-films. The spin-reorientation transition critical thickness of 4 ML is found in good quantitative agreement with the experiment.
△ Less
Submitted 14 February, 2003;
originally announced February 2003.
