-
Decoupling elasticity and electrical conductivity of carbon black gels filled with insulating non-Brownian grains
Authors:
Thomas Larsen,
John R. Royer,
Fraser H. J. Laidlaw,
Wilson C. K. Poon,
Tom Larsen,
Søren J. Andreasen,
Jesper de C. Christiansen
Abstract:
A unique bistable transition has been identified in granular/colloidal gel-composites, resulting from shear-induced phase separation of the gel phase into dense blobs. In energy applications, it is critical to understand how this transition influences electrical performance. Mixing conductive colloids with conductive inclusions, we find the conductivity and elasticity move in concert, both decreas…
▽ More
A unique bistable transition has been identified in granular/colloidal gel-composites, resulting from shear-induced phase separation of the gel phase into dense blobs. In energy applications, it is critical to understand how this transition influences electrical performance. Mixing conductive colloids with conductive inclusions, we find the conductivity and elasticity move in concert, both decreasing in the collapsed phase-separated state. Surprisingly, with insulating inclusions these properties can become decoupled, with the conductivity instead increasing despite the collapse of the gel structure.
△ Less
Submitted 11 May, 2024;
originally announced May 2024.
-
Fresh Cement as a Frictional Non-Brownian Suspension
Authors:
James A. Richards,
Hao Li,
Rory E. O'Neill,
Fraser H. J. Laidlaw,
John R. Royer
Abstract:
Cement is an essential construction material due to its ability to flow before later setting, however the rheological properties must be tightly controlled. Despite this, much understanding remains empirical. Using a combination of continuous and oscillatory shear flow, we compare fresh Portland cement suspensions to previous measurements on model non-Brownian suspensions to gain a micro-physical…
▽ More
Cement is an essential construction material due to its ability to flow before later setting, however the rheological properties must be tightly controlled. Despite this, much understanding remains empirical. Using a combination of continuous and oscillatory shear flow, we compare fresh Portland cement suspensions to previous measurements on model non-Brownian suspensions to gain a micro-physical understanding. Comparing steady and small-amplitude oscillatory shear, we reveal two distinct jamming concentrations, $φ_μ$ and $φ_{\rm rcp}$, where the respective yield stresses diverge. As in model suspensions, the steady-shear jamming point is notably below the oscillatory jamming point, $φ_μ < φ_{\rm rcp}$, suggesting that it is tied to frictional particle contacts. These results indicate that recently established models for the rheology of frictional, adhesive non-Brownian suspensions can be applied to fresh cement pastes, offering a new framework to understand the role of additives and fillers. Such micro-physical understanding can guide formulation changes to improve performance and reduce environmental impact.
△ Less
Submitted 17 January, 2024;
originally announced January 2024.
-
Controlling the rheo-electric properties of graphite/carbon black suspensions by 'flow-switching'
Authors:
Thomas Larsen,
John R. Royer,
Fraser H. J. Laidlaw,
Wilson C. K. Poon,
Tom Larsen,
Søren J. Andreasen,
Jesper de C. Christiansen
Abstract:
The ability to manipulate rheological and electrical properties of colloidal carbon black gels makes them attractive in composites for energy applications such as batteries and fuel cells, where they conduct electricity and prevent sedimentation of `granular' active components. While it is commonly assumed that granular fillers have a simple additive effect on the composite properties, new phenome…
▽ More
The ability to manipulate rheological and electrical properties of colloidal carbon black gels makes them attractive in composites for energy applications such as batteries and fuel cells, where they conduct electricity and prevent sedimentation of `granular' active components. While it is commonly assumed that granular fillers have a simple additive effect on the composite properties, new phenomena can emerge unexpectedly, with some composites exhibiting a unique rheological bi-stability between solid-like and liquid-like states. Here we report such bi-stability in suspensions of non-Brownian graphite and colloidal carbon black in oil, a model system to mimic composite suspensions for energy applications. Steady shear below a critical stress elicits a transition to a persistent mechanically weak and poorly conducting state, which must be `rejuvenated' using high-stress shear to recover a stronger, high-conductivity state. Our findings highlight the highly tunable nature of binary granular/gel composite suspensions, and present new possibilities for optimizing mixing and processing conditions for Li-ion battery slurries.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Simulating the rheology of dense suspensions using pairwise formulation of contact, lubrication and Brownian forces
Authors:
Xuan Li,
John R. Royer,
Christopher Ness
Abstract:
Dense suspensions of solid particles in viscous liquid are ubiquitous in both industry and nature, and there is a clear need for efficient numerical routines to simulate their rheology and microstructure. Particles of micron size present a particular challenge: at low shear rates colloidal interactions control their dynamics while at high rates granular-like contacts dominate. While there are esta…
▽ More
Dense suspensions of solid particles in viscous liquid are ubiquitous in both industry and nature, and there is a clear need for efficient numerical routines to simulate their rheology and microstructure. Particles of micron size present a particular challenge: at low shear rates colloidal interactions control their dynamics while at high rates granular-like contacts dominate. While there are established particle-based simulation schemes for large-scale non-Brownian suspensions using only pairwise lubrication and contact forces, common schemes for colloidal suspensions generally are more computationally costly and thus restricted to relatively small system sizes. Here we present a minimal particle-based numerical model for dense colloidal suspensions which incorporates Brownian forces in pairwise form alongside contact and lubrication forces. We show that this scheme reproduces key features of dense suspension rheology near the collodial-to-granular transition, including both shear-thinning due to entropic forces at low rates and shear thickening at high rate due to contact formation. This scheme is implemented in LAMMPS, a widely-used open source code for parallelized particle-based simulations, with a runtime that scales linearly with the number of particles making it amenable for large-scale simulations.
△ Less
Submitted 25 July, 2023;
originally announced July 2023.
-
Sizing multimodal suspensions with differential dynamic microscopy
Authors:
Joe J Bradley,
Vincent A Martinez,
Jochen Arlt,
John R Royer,
Wilson C K Poon
Abstract:
Differential dynamic microscopy (DDM) can be used to extract mean particle size from videos of suspensions. However, many suspensions have multimodal particle size distributions (PSDs), for which this is not a sufficient description. After clarifying how different particle sizes contribute to the signal in DDM, we show that standard DDM analysis can extract the mean sizes of two populations in a b…
▽ More
Differential dynamic microscopy (DDM) can be used to extract mean particle size from videos of suspensions. However, many suspensions have multimodal particle size distributions (PSDs), for which this is not a sufficient description. After clarifying how different particle sizes contribute to the signal in DDM, we show that standard DDM analysis can extract the mean sizes of two populations in a bimodal suspension given prior knowledge of the sample's bimodality. Further, the use of the CONTIN algorithm obviates the need for such prior knowledge. Finally, we show that by selectively analysing portions of the DDM images, we can size a trimodal suspension where the large particles would otherwise dominate the signal, again without prior knowledge of the trimodality.
△ Less
Submitted 16 October, 2023; v1 submitted 18 May, 2023;
originally announced May 2023.
-
Impact of granular inclusions on the phase behavior of colloidal gels
Authors:
Yankai Li,
John R. Royer,
Jin Sun,
Christopher Ness
Abstract:
Colloidal gels formed from small attractive particles are commonly used in formulations to keep larger components in suspension. However, despite extensive work characterizing unfilled gels, little is known about how larger inclusions alter the phase behavior and microstructure of the colloidal system. Here we use numerical simulations to examine how larger `granular' particles can alter the gel t…
▽ More
Colloidal gels formed from small attractive particles are commonly used in formulations to keep larger components in suspension. However, despite extensive work characterizing unfilled gels, little is known about how larger inclusions alter the phase behavior and microstructure of the colloidal system. Here we use numerical simulations to examine how larger `granular' particles can alter the gel transition phase boundaries. We find two distinct regimes depending on both the filler size and native gel structure: a `passive' regime where the filler fits into already-present voids, giving little change in the transition, and an `active' regime where the filler no longer fits in these voids and instead perturbs the native structure. In this second regime the phase boundary is controlled by an effective colloidal volume fraction given by the available free volume.
△ Less
Submitted 8 July, 2022;
originally announced July 2022.
-
Rheology of Polydisperse non-Spherical Graphite Particles Suspended in Mineral Oil
Authors:
Th. Larsen,
A. L. Søbye,
J. R. Royer,
W. C. K. Poon,
T. Larsen,
S. J. Andreasen,
A. D. Drozdov,
J. D. C. Christiansen
Abstract:
We study the role of filler concentration and microphysics on the rheology of polydisperse flake-graphite particles suspended in Newtonian mineral oil. Under steady shear, our samples exhibit shear thinning and yielding behaviour is observed for volume fractions $φ> 0.18$. Time-temperature superposition was observed using an Arrhenius-type horizontal shift factor, giving a flow activation energy t…
▽ More
We study the role of filler concentration and microphysics on the rheology of polydisperse flake-graphite particles suspended in Newtonian mineral oil. Under steady shear, our samples exhibit shear thinning and yielding behaviour is observed for volume fractions $φ> 0.18$. Time-temperature superposition was observed using an Arrhenius-type horizontal shift factor, giving a flow activation energy that is dependent on the graphite volume fraction, suggesting concentration-dependent contributions to relaxation processes in the suspensions. The flow curves are fitted by a constraint-based model, indicating that the flow behaviour is controlled by frictional and adhesive contacts, with the model suggesting that the adhesive stress is temperature dependent.
△ Less
Submitted 26 October, 2022; v1 submitted 6 July, 2022;
originally announced July 2022.
-
Rheological design of thickened alcohol-based hand rubs
Authors:
Andreia F Silva,
Tiffany A Wood,
Daniel J M Hodgson,
John R Royer,
Job H J Thijssen,
Alex Lips,
Wilson C K Poon
Abstract:
The handleability and sensory perception of hand sanitisers by consumers affect the hygiene outcome. Spillage may result in under-dosing and poor sensory properties can lead to under-utilisation. We first propose four principles (low run off, spreadability, smoothness and non-stickiness) for designing the rheology of thickened alcohol-based hand rubs with acceptable handleability and hand feel. We…
▽ More
The handleability and sensory perception of hand sanitisers by consumers affect the hygiene outcome. Spillage may result in under-dosing and poor sensory properties can lead to under-utilisation. We first propose four principles (low run off, spreadability, smoothness and non-stickiness) for designing the rheology of thickened alcohol-based hand rubs with acceptable handleability and hand feel. We then evaluate a commercial hand gel and a variety of simplified formulations thickened with microgels (Carbopol 974P, Carbopol Ultrez 20 and Sepimax Zen), or linear polymers (Jaguar HP 120 COS), and evaluate them against these design criteria. All four additives provide acceptable spreadability by shear thinning to $η\approx 10^{-1} Pa \, s$ at $\dotγ\sim 10^3 s^{-1}$. Either the finite yield stress conferred by the microgels ($σ_y \gtrsim 10 Pa$) or the increase in low-shear viscosity provided by the linear polymer ($η\gtrsim 1 Pa \, s$ at $\dotγ\lesssim 0.1 s^{-1}$) give rise to acceptably low run-off. However, the formulation using the linear polymer shows a filament breakage time of $τ_{\rm b} \approx 1 s$ in capillary rheology, which may result in stickiness and therefore a less than optimal hand feel.
△ Less
Submitted 5 May, 2022; v1 submitted 24 January, 2022;
originally announced January 2022.
-
Flow-Switched Bistability in a Colloidal Gel with Non-Brownian Grains
Authors:
Yujie Jiang,
Soichiro Makino,
John R. Royer,
Wilson C. K. Poon
Abstract:
We show that mixing a colloidal gel with larger, non-Brownian grains generates novel flow-switched bistability. Using a combination of confocal microscopy and rheology, we find that prolonged moderate shear results in liquefaction by collapsing the gel into disjoint globules, whereas fast shear gives rise to a yield-stress gel with granular inclusions upon flow cessation. We map out the state diag…
▽ More
We show that mixing a colloidal gel with larger, non-Brownian grains generates novel flow-switched bistability. Using a combination of confocal microscopy and rheology, we find that prolonged moderate shear results in liquefaction by collapsing the gel into disjoint globules, whereas fast shear gives rise to a yield-stress gel with granular inclusions upon flow cessation. We map out the state diagram of this new `mechanorheological material' with varying granular content and demonstrate that its behavior is also found in separate mixture using different particles and solvents.
△ Less
Submitted 11 March, 2022; v1 submitted 10 November, 2021;
originally announced November 2021.
-
Soft matter science and the COVID-19 pandemic
Authors:
Wilson C K Poon,
Aidan T Brown,
Susana O. L. Direito,
Daniel J M Hodgson,
Lucas Le Nagard,
Alex Lips,
Cait E MacPhee,
Davide Marenduzzo,
John R Royer,
Andreia F Silva,
Job H J Thijssen,
Simon Titmuss
Abstract:
Much of the science underpinning the global response to the COVID-19 pandemic lies in the soft matter domain. Coronaviruses are composite particles with a core of nucleic acids complexed to proteins surrounded by a protein-studded lipid bilayer shell. A dominant route for transmission is via air-borne aerosols and droplets. Viral interaction with polymeric body fluids, particularly mucus, and cell…
▽ More
Much of the science underpinning the global response to the COVID-19 pandemic lies in the soft matter domain. Coronaviruses are composite particles with a core of nucleic acids complexed to proteins surrounded by a protein-studded lipid bilayer shell. A dominant route for transmission is via air-borne aerosols and droplets. Viral interaction with polymeric body fluids, particularly mucus, and cell membranes control their infectivity, while their interaction with skin and artificial surfaces underpins cleaning and disinfection and the efficacy of masks and other personal protective equipment. The global response to COVID-19 has highlighted gaps in the soft matter knowledge base. We survey these gaps, especially as pertaining to the transmission of the disease, and suggest questions that can (and need to) be tackled, both in response to COVID-19 and to better prepare for future viral pandemics.
△ Less
Submitted 28 August, 2020; v1 submitted 4 July, 2020;
originally announced July 2020.
-
Force chains and networks: wet suspensions through dry granular eyes
Authors:
Rangarajan Radhakrishnan,
John R. Royer,
Wilson C. K. Poon,
Jin Sun
Abstract:
Recent advances in shear-thickening suspension rheology suggest a relation between (wet) suspension flow below jamming and (dry) granular physics. To probe this connection, we simulated the contact force networks in suspensions of non-Brownian spheres using the discrete element method (DEM), varying the particle friction coefficient and volume fraction. We find that force networks in these suspens…
▽ More
Recent advances in shear-thickening suspension rheology suggest a relation between (wet) suspension flow below jamming and (dry) granular physics. To probe this connection, we simulated the contact force networks in suspensions of non-Brownian spheres using the discrete element method (DEM), varying the particle friction coefficient and volume fraction. We find that force networks in these suspensions show quantitative similarities to those in jammed dry grains. As suspensions approach the jamming point, the extrapolated volume fraction and coordination number at jamming are similar to critical values obtained for isotropically compressed spheres. Similarly, the shape of the distribution of contact forces in flowing suspensions is remarkably similar to that found in granular packings, suggesting potential refinements for analytical mean field models for the rheology of shear thickening suspensions.
△ Less
Submitted 5 April, 2019;
originally announced April 2019.
-
Competing Time Scales Lead to Oscillations in Shear-Thickening Suspensions
Authors:
J. A. Richards,
J. R. Royer,
B. Liebchen,
B. M. Guy,
W. C. K. Poon
Abstract:
Competing time scales generate novelty. Here, we show that a coupling between the time scales imposed by instrument inertia and the formation of inter-particle frictional contacts in shear-thickening suspensions leads to highly asymmetric shear-rate oscillations. Experiments tuning the presence of oscillations by varying the two time-scales validate our model. The observed oscillations give access…
▽ More
Competing time scales generate novelty. Here, we show that a coupling between the time scales imposed by instrument inertia and the formation of inter-particle frictional contacts in shear-thickening suspensions leads to highly asymmetric shear-rate oscillations. Experiments tuning the presence of oscillations by varying the two time-scales validate our model. The observed oscillations give access to a shear-jamming portion of the flow curve that is forbidden in conventional rheometry. Moreover, the oscillation frequency allows us to quantify an intrinsic relaxation time for particle contacts. The coupling of fast contact network dynamics to a slower system variable should be generic to many other areas of dense suspension flow, with instrument inertia providing a paradigmatic example.
△ Less
Submitted 22 July, 2019; v1 submitted 20 February, 2019;
originally announced February 2019.
-
Liquid migration in shear thickening suspensions flowing through constrictions
Authors:
Rory E. O'Neill,
John R. Royer,
Wilson C. K. Poon
Abstract:
Dense particulate suspensions often become more dilute as they move downstream through a constriction. We find that as a shear-thickening suspension is extruded through a narrow die and undergoes such liquid migration, the extrudate maintains a steady concentration $φ_c$, independent of time or initial concentration. This concentration $φ_c$ varies with volumetric flow rate $Q$ and die radius…
▽ More
Dense particulate suspensions often become more dilute as they move downstream through a constriction. We find that as a shear-thickening suspension is extruded through a narrow die and undergoes such liquid migration, the extrudate maintains a steady concentration $φ_c$, independent of time or initial concentration. This concentration $φ_c$ varies with volumetric flow rate $Q$ and die radius $r_{\rm d}$, but at low $Q$ collapses onto a universal function of $Q/r_{\rm d}^3$, a characteristic shear rate in the die. We explain quantitatively the onset of liquid migration in extrusion by coupling a recent model for discontinuous shear thickening and the `suspension balance model' for solvent permeation through particles.
△ Less
Submitted 17 September, 2019; v1 submitted 29 August, 2018;
originally announced August 2018.
-
A rheological signature of frictional interactions in shear thickening suspensions
Authors:
John R. Royer,
Daniel L. Blair,
Steven D. Hudson
Abstract:
Colloidal shear thickening presents a significant challenge because the macroscopic rheology becomes increasingly controlled by the microscopic details of short ranged particle interactions in the shear thickening regime. Our measurements here of the first normal stress difference over a wide range of particle volume fraction elucidate the relative contributions from hydrodynamic lubrication and f…
▽ More
Colloidal shear thickening presents a significant challenge because the macroscopic rheology becomes increasingly controlled by the microscopic details of short ranged particle interactions in the shear thickening regime. Our measurements here of the first normal stress difference over a wide range of particle volume fraction elucidate the relative contributions from hydrodynamic lubrication and frictional contact forces, which have been debated. At moderate volume fractions we find $N_1<0$, consistent with hydrodynamic models, however at higher volume fractions and shear stresses these models break down and we instead observe dilation ($N_1>0$), indicating frictional contact networks. Remarkably, there is no signature of this transition in the viscosity, instead this change in the sign of $N_1$ occurs while the shear thickening remains continuous. These results suggest a scenario where shear thickening is driven primarily by the formation of frictional contacts, with hydrodynamic forces playing a supporting role at lower concentrations. Motivated by this picture, we introduce a simple model which combines these frictional and hydrodynamic contributions and accurately fits the measured viscosity over a wide range of particle volume fraction and shear stress.
△ Less
Submitted 1 March, 2016;
originally announced March 2016.
-
The role of interstitial gas in determining the impact response of granular beds
Authors:
John R. Royer,
Bryan Conyers,
Eric I. Corwin,
Peter J. Eng,
Heinrich M. Jaeger
Abstract:
We examine the impact of a solid sphere into a fine-grained granular bed. Using high-speed X-ray radiography we track both the motion of the sphere and local changes in the bed packing fraction. Varying the initial packing density as well as the ambient gas pressure, we find a complete reversal in the effect of interstitial gas on the impact response of the bed: The dynamic coupling between gas an…
▽ More
We examine the impact of a solid sphere into a fine-grained granular bed. Using high-speed X-ray radiography we track both the motion of the sphere and local changes in the bed packing fraction. Varying the initial packing density as well as the ambient gas pressure, we find a complete reversal in the effect of interstitial gas on the impact response of the bed: The dynamic coupling between gas and grains allows for easier penetration in initially loose beds but impedes penetration in more densely packed beds. High-speed imaging of the local packing density shows that these seemingly incongruous effects have a common origin in the resistance to bed packing changes caused by interstitial air.
△ Less
Submitted 10 December, 2010;
originally announced December 2010.
-
Droplet and cluster formation in freely falling granular streams
Authors:
Scott R. Waitukaitis,
Helge F. Gruetjen,
John R. Royer,
Heinrich M. Jaeger
Abstract:
Particle beams are important tools for probing atomic and molecular interactions. Here we demonstrate that particle beams also offer a unique opportunity to investigate interactions in macroscopic systems, such as granular media. Motivated by recent experiments on streams of grains that exhibit liquid-like breakup into droplets, we use molecular dynamics simulations to investigate the evolution of…
▽ More
Particle beams are important tools for probing atomic and molecular interactions. Here we demonstrate that particle beams also offer a unique opportunity to investigate interactions in macroscopic systems, such as granular media. Motivated by recent experiments on streams of grains that exhibit liquid-like breakup into droplets, we use molecular dynamics simulations to investigate the evolution of a dense stream of macroscopic spheres accelerating out of an opening at the bottom of a reservoir. We show how nanoscale details associated with energy dissipation during collisions modify the stream's macroscopic behavior. We find that inelastic collisions collimate the stream, while the presence of short-range attractive interactions drives structure formation. Parameterizing the collision dynamics by the coefficient of restitution (i.e., the ratio of relative velocities before and after impact) and the strength of the cohesive interaction, we map out a spectrum of behaviors that ranges from gas-like jets in which all grains drift apart to liquid-like streams that break into large droplets containing hundreds of grains. We also find a new, intermediate regime in which small aggregates form by capture from the gas phase, similar to what can be observed in molecular beams. Our results show that nearly all aspects of stream behavior are closely related to the velocity gradient associated with vertical free fall. Led by this observation, we propose a simple energy balance model to explain the droplet formation process. The qualitative as well as many quantitative features of the simulations and the model compare well with available experimental data and provide a first quantitative measure of the role of attractions in freely cooling granular streams.
△ Less
Submitted 2 November, 2010; v1 submitted 7 June, 2010;
originally announced June 2010.
-
Gas-Mediated Impact Dynamics in Fine-Grained Granular Materials
Authors:
John R. Royer,
Eric I. Corwin,
Peter J. Eng,
Heinrich M. Jaeger
Abstract:
Non-cohesive granular media exhibit complex responses to sudden impact that often differ from those of ordinary solids and liquids. We investigate how this response is mediated by the presence of interstitial gas between the grains. Using high-speed x-ray radiography we track the motion of a steel sphere through the interior of a bed of fine, loose granular material. We find a crossover from nea…
▽ More
Non-cohesive granular media exhibit complex responses to sudden impact that often differ from those of ordinary solids and liquids. We investigate how this response is mediated by the presence of interstitial gas between the grains. Using high-speed x-ray radiography we track the motion of a steel sphere through the interior of a bed of fine, loose granular material. We find a crossover from nearly incompressible, fluid-like behavior at atmospheric pressure to a highly compressible, dissipative response once most of the gas is evacuated. We discuss these results in light of recent proposals for the drag force in granular media.
△ Less
Submitted 16 July, 2007; v1 submitted 14 February, 2007;
originally announced February 2007.
