-
Magnetic Force Microscopy: High Quality Factor Two-Pass Mode
Authors:
Christopher Habenschaden,
Sibylle Sievers,
Alexander Klasen,
Andrea Cerreta,
Hans Werner Schumacher
Abstract:
Magnetic force microscopy (MFM) is a well-established technique in scanning probe microscopy (SPM) that allows the imaging of magnetic samples with spatial resolution of tens of nm and stray fields down to the mT range. Spatial resolution and field sensitivity can be improved significantly by measuring in vacuum conditions. This effect originates from the higher quality factor (Q-factor) of the ca…
▽ More
Magnetic force microscopy (MFM) is a well-established technique in scanning probe microscopy (SPM) that allows the imaging of magnetic samples with spatial resolution of tens of nm and stray fields down to the mT range. Spatial resolution and field sensitivity can be improved significantly by measuring in vacuum conditions. This effect originates from the higher quality factor (Q-factor) of the cantilevers oscillation in vacuum compared to ambient conditions. However, while high Q-factors are desirable as they directly improve the magnetic measurement signal, they pose a challenge when pursuing a standard MFM two-pass (lift) mode measurement. At high Q-factors amplitude-based topography measurements become impossible and MFM phase response behaves non-linear. Here we present an implementation of a modified two-pass mode into a vacuum atomic force microscope (AFM) that overcomes these issues. By controlling Q in the first pass and using a phase-locked loop (PLL) technique in the second pass, high Q-factor measurements in vacuum are enabled. By measuring the cantilevers frequency shift instead of phase shift, otherwise emerging non-linearities are eliminated. The achievable improvements in resolution and sensitivity are demonstrated on patterned magnetic nanostructured samples. Elimination of non-linear response is showcased by a measurement of a very well-known calculable multilayer reference sample that is used for tip calibration in quantitative MFM (qMFM).
△ Less
Submitted 25 June, 2024;
originally announced June 2024.
-
Observation of Floquet states in graphene
Authors:
Marco Merboldt,
Michael Schüler,
David Schmitt,
Jan Philipp Bange,
Wiebke Bennecke,
Karun Gadge,
Klaus Pierz,
Hans Werner Schumacher,
Davood Momeni,
Daniel Steil,
Salvatore R. Manmana,
Michael Sentef,
Marcel Reutzel,
Stefan Mathias
Abstract:
Recent advances in the field of condensed-matter physics have unlocked the potential to realize and control emergent material phases that do not exist in thermal equilibrium. One of the most promising concepts in this regard is Floquet engineering, the coherent dressing of matter via time-periodic perturbations. However, the broad applicability of Floquet engineering to quantum materials is still…
▽ More
Recent advances in the field of condensed-matter physics have unlocked the potential to realize and control emergent material phases that do not exist in thermal equilibrium. One of the most promising concepts in this regard is Floquet engineering, the coherent dressing of matter via time-periodic perturbations. However, the broad applicability of Floquet engineering to quantum materials is still unclear. For the paradigmatic case of monolayer graphene, the theoretically predicted Floquet-induced effects, despite a seminal report of the light-induced anomalous Hall effect, have been put into question. Here, we overcome this problem by using electronic structure measurements to provide direct experimental evidence of Floquet engineering in graphene. We report light-matter-dressed Dirac bands by measuring the contribution of Floquet sidebands, Volkov sidebands, and their quantum path interference to graphene's photoemission spectral function. Our results finally demonstrate that Floquet engineering in graphene is possible, paving the way for the experimental realization of the many theoretical proposals on Floquet-engineered band structures and topological phases.
△ Less
Submitted 19 April, 2024;
originally announced April 2024.
-
Influence of the magneto-volume effect on the transient reflectivity of MnSi
Authors:
J. Kalin,
S. Sievers,
H. Füser,
A. Bauer,
C. Pfleiderer,
H. W. Schumacher,
M. Bieler
Abstract:
The magneto-volume effect is a well-established yet frequently overlooked phenomenon in magnetic materials that may affect a wide range of physical properties. Our study explores the influence of the magneto-volume effect on the transient reflectivity of MnSi, a well-known chiral magnet with strong magnetoelastic coupling. We observe a unipolar reflectivity transient in the paramagnetic phase, con…
▽ More
The magneto-volume effect is a well-established yet frequently overlooked phenomenon in magnetic materials that may affect a wide range of physical properties. Our study explores the influence of the magneto-volume effect on the transient reflectivity of MnSi, a well-known chiral magnet with strong magnetoelastic coupling. We observe a unipolar reflectivity transient in the paramagnetic phase, contrasting with a bipolar response in phases with magnetic long-range order. Comparing our findings with thermal expansion from literature, we establish that the bipolar response originates in the magneto-volume effect which dominates the thermal expansion and influences the optical reflectivity. Our results highlight not only that the magneto-volume effect must be considered when discussing transient reflectivity measurements of magnetic materials but also that such measurements permit to study the characteristic time scales of the magneto-volume effect itself, contributing to a deeper understanding of this often-neglected phenomenon.
△ Less
Submitted 13 May, 2024; v1 submitted 3 February, 2024;
originally announced February 2024.
-
arXiv:2401.04793
[pdf]
cond-mat.mtrl-sci
cond-mat.mes-hall
cond-mat.str-el
cond-mat.supr-con
quant-ph
2024 Roadmap on Magnetic Microscopy Techniques and Their Applications in Materials Science
Authors:
D. V. Christensen,
U. Staub,
T. R. Devidas,
B. Kalisky,
K. C. Nowack,
J. L. Webb,
U. L. Andersen,
A. Huck,
D. A. Broadway,
K. Wagner,
P. Maletinsky,
T. van der Sar,
C. R. Du,
A. Yacoby,
D. Collomb,
S. Bending,
A. Oral,
H. J. Hug,
A. -O. Mandru,
V. Neu,
H. W. Schumacher,
S. Sievers,
H. Saito,
A. A. Khajetoorians,
N. Hauptmann
, et al. (28 additional authors not shown)
Abstract:
Considering the growing interest in magnetic materials for unconventional computing, data storage, and sensor applications, there is active research not only on material synthesis but also characterisation of their properties. In addition to structural and integral magnetic characterisations, imaging of magnetization patterns, current distributions and magnetic fields at nano- and microscale is of…
▽ More
Considering the growing interest in magnetic materials for unconventional computing, data storage, and sensor applications, there is active research not only on material synthesis but also characterisation of their properties. In addition to structural and integral magnetic characterisations, imaging of magnetization patterns, current distributions and magnetic fields at nano- and microscale is of major importance to understand the material responses and qualify them for specific applications. In this roadmap, we aim to cover a broad portfolio of techniques to perform nano- and microscale magnetic imaging using SQUIDs, spin center and Hall effect magnetometries, scanning probe microscopies, x-ray- and electron-based methods as well as magnetooptics and nanoMRI. The roadmap is aimed as a single access point of information for experts in the field as well as the young generation of students outlining prospects of the development of magnetic imaging technologies for the upcoming decade with a focus on physics, materials science, and chemistry of planar, 3D and geometrically curved objects of different material classes including 2D materials, complex oxides, semi-metals, multiferroics, skyrmions, antiferromagnets, frustrated magnets, magnetic molecules/nanoparticles, ionic conductors, superconductors, spintronic and spinorbitronic materials.
△ Less
Submitted 9 January, 2024;
originally announced January 2024.
-
Suppression of the spin waves nonreciprocity due to interfacial Dzyaloshinskii Moriya interaction by lateral confinement in magnetic nanostructures
Authors:
S. Tacchi,
R. Silvani,
M. Kuepferling,
A. Fernandez Scarioni,
S. Sievers,
H. W. Schumacher,
E. Darwin,
M. -A. Syskaki,
G. Jakob,
M. Klaui,
G. Carlotti
Abstract:
Despite the huge recent interest towards chiral magnetism related to the interfacial Dzyaloshinskii Moriya interaction (iDMI) in layered systems, there is a lack of experimental data on the effect of iDMI on the spin waves eigenmodes of laterally confined nanostructures. Here we exploit Brillouin Light Scattering (BLS) to analyze the spin wave eigenmodes of non-interacting circular and elliptical…
▽ More
Despite the huge recent interest towards chiral magnetism related to the interfacial Dzyaloshinskii Moriya interaction (iDMI) in layered systems, there is a lack of experimental data on the effect of iDMI on the spin waves eigenmodes of laterally confined nanostructures. Here we exploit Brillouin Light Scattering (BLS) to analyze the spin wave eigenmodes of non-interacting circular and elliptical dots, as well as of long stripes, patterned starting from a Pt(3.4 nm)/CoFeB(0.8 nm) bilayer, with lateral dimensions ranging from 100 nm to 400 nm. Our experimental results, corroborated by micromagnetic simulations based on the GPU-accelerated MuMax3 software package, provide evidence for a strong suppression of the frequency asymmetry between counter-propagating spin waves (corresponding to either Stokes or anti-Stokes peaks in BLS spectra), when the lateral confinement is reduced from 400 nm to 100 nm, i.e. when it becomes lower than the light wavelength. Such an evolution reflects the modification of the spin wave character from propagating to stationary and indicates that the BLS based method of quantifying the i-DMI strength from the frequency difference of counter propagating spin waves is not applicable in the case of magnetic elements with lateral dimension below about 400 nm.
△ Less
Submitted 28 June, 2023;
originally announced June 2023.
-
Optical creation and annihilation of skyrmion patches in a bulk chiral magnet
Authors:
Jantje Kalin,
Sibylle Sievers,
Daniel Kalin,
Andreas Bauer,
Robin Abram,
Heiko Füser,
Hans Werner Schumacher,
Christian Pfleiderer,
Mark Bieler
Abstract:
A key challenge for the realization of future skyrmion devices comprises the controlled creation, annihilation and detection of these topologically non-trivial magnetic spin textures. In this study, we report an all-optical approach for writing, deleting, and reading skyrmions in the cubic chiral magnet Fe$_{0.25}$Co$_{0.75}$Si based on thermal quenching. Using focused femtosecond laser pulses, pa…
▽ More
A key challenge for the realization of future skyrmion devices comprises the controlled creation, annihilation and detection of these topologically non-trivial magnetic spin textures. In this study, we report an all-optical approach for writing, deleting, and reading skyrmions in the cubic chiral magnet Fe$_{0.25}$Co$_{0.75}$Si based on thermal quenching. Using focused femtosecond laser pulses, patches of a skyrmion state are created and annihilated locally, demonstrating unprecedented control of thermally metastable skyrmions in a bulk compound. The skyrmion state is read-out by analyzing the microwave spin excitations in time-resolved magneto-optical Kerr effect measurements. Extracting the magnetic field and laser fluence dependence, we find well-separated magnetic field regimes and different laser fluence thresholds for the laser-induced creation and annihilation of metastable skyrmions. The all-optical skyrmion control, as established in this study for a model system, represents a promising and energy-efficient approach for the realization of skyrmions as magnetic bits in future storage devices, reminiscent of magneto-optical storage devices in the past.
△ Less
Submitted 31 May, 2023;
originally announced June 2023.
-
Optically excited spin dynamics of thermally metastable skyrmions in Fe$_{0.75}$Co$_{0.25}$Si
Authors:
Jantje Kalin,
Sibylle Sievers,
Heiko Füser,
Hans Werner Schumacher,
Felipe García-Sánchez,
Andreas Bauer,
Christian Pfleiderer,
Mark Bieler
Abstract:
We investigate the microwave spin excitations of the cubic chiral magnet Fe$_{0.75}$Co$_{0.25}$Si as driven by the thermal modulation of magnetic interactions via laser heating and probed by time-resolved measurements of the magneto-optical Kerr effect. Focusing on the topologically nontrivial skyrmion lattice state, the dynamic properties in thermodynamic equilibrium are compared with those of a…
▽ More
We investigate the microwave spin excitations of the cubic chiral magnet Fe$_{0.75}$Co$_{0.25}$Si as driven by the thermal modulation of magnetic interactions via laser heating and probed by time-resolved measurements of the magneto-optical Kerr effect. Focusing on the topologically nontrivial skyrmion lattice state, the dynamic properties in thermodynamic equilibrium are compared with those of a metastable state prepared by means of rapid field cooling. In both cases, we find precessional and exponential contributions to the dynamic response, characteristic of a breathing mode and energy dissipation, respectively. When taking into account the universal scaling as a function of temperature, the precession frequencies in the equilibrium and metastable skyrmion state are in excellent quantitative agreement. This finding highlights that skyrmion states far from thermal equilibrium promise great flexibility, for instance with respect to temperature and field scales, both for possible microwave applications and the study of fundamental properties.
△ Less
Submitted 29 June, 2022; v1 submitted 8 February, 2022;
originally announced February 2022.
-
A Ti/Pt/Co multilayer stack for transfer function based magnetic force microscopy calibrations
Authors:
Baha Sakar,
Sibylle Sievers,
Alexander Fernandez Scarioni,
Felipe Garcia-Sanchez,
Ilker Oztoprak,
Hans Werner Schumacher,
Osman Ozturk
Abstract:
Magnetic force microscopy is a widespread technique for imaging magnetic structures with a resolution of some 10 nanometers. MFM can be calibrated to obtain quantitative spatially resolved magnetization data in units of A/m by determining the calibrated point spread function of the instrument, its instrument calibration function (ICF), from a measurement of a well-known reference sample. Beyond qu…
▽ More
Magnetic force microscopy is a widespread technique for imaging magnetic structures with a resolution of some 10 nanometers. MFM can be calibrated to obtain quantitative spatially resolved magnetization data in units of A/m by determining the calibrated point spread function of the instrument, its instrument calibration function (ICF), from a measurement of a well-known reference sample. Beyond quantifying the MFM data, a deconvolution of the MFM image data with the ICF also corrects the smearing caused by the finite width of the MFM tip stray field distribution. However, the quality of the calibration depends critically on the calculability of the magnetization distribution of the reference sample. Here, we discuss a Ti/Pt/Co multilayer stack that shows a stripe domain pattern as a suitable reference material. A precise control of the fabrication process, combined with a characterization of the sample micromagnetic parameters, allows reliable calculation of the sample's magnetic stray field, proven by a very good agreement between micromagnetic simulations and qMFM measurements. A calibrated qMFM measurement using the Ti/Pt/Co stack as a reference sample is shown and validated, and the application area for quantitative MFM measurements calibrated with the Ti/Pt/Co stack is discussed
△ Less
Submitted 24 January, 2022;
originally announced January 2022.
-
Controlling the error mechanism in a tunable-barrier non-adiabatic charge pump by dynamic gate compensation
Authors:
Frank Hohls,
Vyacheslavs Kashcheyevs,
Friederike Stein,
Tobias Wenz,
Bernd Kaestner,
Hans W. Schumacher
Abstract:
Single-electron pumps based on tunable-barrier quantum dots are the most promising candidates for a direct realization of the unit ampere in the recently revised SI: they are simple to operate and show high precision at high operation frequencies. The current understanding of the residual transfer errors at low temperature is based on the evaluation of backtunneling effects in the decay cascade mo…
▽ More
Single-electron pumps based on tunable-barrier quantum dots are the most promising candidates for a direct realization of the unit ampere in the recently revised SI: they are simple to operate and show high precision at high operation frequencies. The current understanding of the residual transfer errors at low temperature is based on the evaluation of backtunneling effects in the decay cascade model. This model predicts a strong dependence on the ratio of the time dependent changes in the quantum dot energy and the tunneling barrier transparency. Here we employ a two-gate operation scheme to verify this prediction and to demonstrate control of the backtunneling error. We derive and experimentally verify a quantitative prediction for the error suppression, thereby confirming the basic assumptions of the backtunneling (decay cascade) model. Furthermore, we demonstrate a controlled transition from the backtunneling dominated regime into the thermal (sudden decoupling) error regime. The suppression of transfer errors by several orders of magnitude at zero magnetic field was additionally verified by a sub-ppm precision measurement.
△ Less
Submitted 20 May, 2022; v1 submitted 20 December, 2021;
originally announced December 2021.
-
Magnetic field robust high quality factor NbTiN superconducting microwave resonators
Authors:
Manuel Müller,
Thomas Luschmann,
Andreas Faltermeier,
Stefan Weichselbaumer,
Leon Koch,
Gerhard B. P. Huber,
Hans Werner Schumacher,
Niels Ubbelohde,
David Reifert,
Thomas Scheller,
Frank Deppe,
Achim Marx,
Stefan Filipp,
Matthias Althammer,
Rudolf Gross,
Hans Huebl
Abstract:
We systematically study the performance of compact lumped element planar microwave $\mathrm{Nb_{70}Ti_{30}N}$ (NbTiN) resonators operating at 5 GHz in external in-plane magnetic fields up to 440 mT, a broad temperature regime from 2.2 K up to 13 K, as well as mK temperatures. For comparison, the resonators have been fabricated on thermally oxidized and pristine, (001) oriented silicon substrates.…
▽ More
We systematically study the performance of compact lumped element planar microwave $\mathrm{Nb_{70}Ti_{30}N}$ (NbTiN) resonators operating at 5 GHz in external in-plane magnetic fields up to 440 mT, a broad temperature regime from 2.2 K up to 13 K, as well as mK temperatures. For comparison, the resonators have been fabricated on thermally oxidized and pristine, (001) oriented silicon substrates. When operating the resonators in the multi-photon regime at $T=2.2$ K, we find internal quality factors $Q_{\mathrm{int}}\simeq$ $2\cdot10^5$ for NbTiN resonators grown on pristine Si substrates, while resonators grown on thermally oxidized substrates show a reduced value of $Q_{\mathrm{int}}\simeq$ $1\cdot10^4$, providing evidence for additional loss channels for the latter substrate. In addition, we investigate the $Q$-factors of the resonators on pristine Si substrates at millikelvin temperatures to asses their applicability for quantum applications. We find $Q_{\mathrm{int}}\simeq$ $2\cdot10^5$ in the single photon regime and $Q_{\mathrm{int}}\simeq$ $5\cdot10^5$ in the high power regime at $T=7$ mK.
△ Less
Submitted 15 December, 2021;
originally announced December 2021.
-
Quantum calibrated magnetic force microscopy
Authors:
Baha Sakar,
Yan Liu,
Sibylle Sievers,
Volker Neu,
Johannes Lang,
Christian Osterkamp,
Matthew L. Markham,
Osman Öztürk,
Fedor Jelezko,
Hans W. Schumacher
Abstract:
We report the quantum calibration of a magnetic force microscope (MFM) by measuring the two-dimensional magnetic stray field distribution of the MFM tip using a single nitrogen vacancy (NV) center in diamond. From the measured stray field distribution and the mechanical properties of the cantilever a calibration function is derived allowing to convert MFM images to quantum calibrated stray field m…
▽ More
We report the quantum calibration of a magnetic force microscope (MFM) by measuring the two-dimensional magnetic stray field distribution of the MFM tip using a single nitrogen vacancy (NV) center in diamond. From the measured stray field distribution and the mechanical properties of the cantilever a calibration function is derived allowing to convert MFM images to quantum calibrated stray field maps. This novel approach overcomes limitations of prior MFM calibration schemes and allows quantum calibrated nanoscale stray field measurements in a field range inaccessible to scanning NV magnetometry. Quantum calibrated measurements of a stray field reference sample allow its use as a transfer standard, opening the road towards fast and easily accessible quantum traceable calibrations of virtually any MFM.
△ Less
Submitted 6 December, 2021; v1 submitted 25 March, 2021;
originally announced March 2021.
-
Direct Access to Auger recombination in Graphene
Authors:
Marius Keunecke,
David Schmitt,
Marcel Reutzel,
Marius Weber,
Christina Möller,
G. S. Matthijs Jansen,
Tridev A. Mishra,
Alexander Osterkorn,
Wiebke Bennecke,
Klaus Pierz,
Hans Werner Schumacher,
Davood Momeni Pakdehi,
Daniel Steil,
Salvatore R. Manmana,
Sabine Steil,
Stefan Kehrein,
Hans Christian Schneider,
Stefan Mathias
Abstract:
Auger scattering channels are of fundamental importance to describe and understand the non-equilibrium charge carrier dynamics in graphene. While impact excitation increases the number of carriers in the conduction band and has been observed experimentally, direct access to its inverse process, Auger recombination, has so far been elusive. Here, we tackle this problem by applying our novel setup f…
▽ More
Auger scattering channels are of fundamental importance to describe and understand the non-equilibrium charge carrier dynamics in graphene. While impact excitation increases the number of carriers in the conduction band and has been observed experimentally, direct access to its inverse process, Auger recombination, has so far been elusive. Here, we tackle this problem by applying our novel setup for ultrafast time-resolved photoelectron momentum microscopy. Our approach gives simultaneous access to charge carrier dynamics at all energies and in-plane momenta within the linearly dispersive Dirac cones. We thus provide direct evidence for Auger recombination on a sub-10~fs timescale by identifying transient energy- and momentum-dependent populations far above the excitation energy. We compare our results with model calculations of scattering processes in the Dirac cone to support our experimental findings.
△ Less
Submitted 26 November, 2020;
originally announced December 2020.
-
Silicon carbide stacking-order-induced doping variation in epitaxial graphene
Authors:
Davood Momeni Pakdehi,
Philip Schädlich,
T. T. Nhung Nguyen,
Alexei A. Zakharov,
Stefan Wundrack,
Florian Speck,
Klaus Pierz,
Thomas Seyller,
Christoph Tegenkamp,
Hans. W. Schumacher
Abstract:
Generally, it is supposed that the Fermi level in epitaxial graphene is controlled by two effects: p-type polarization doping induced by the bulk of the hexagonal SiC(0001) substrate and overcompensation by donor-like states related to the buffer layer. In this work, we evidence that this effect is also related to the specific underlying SiC terrace. We fabricated a periodic sequence of non-identi…
▽ More
Generally, it is supposed that the Fermi level in epitaxial graphene is controlled by two effects: p-type polarization doping induced by the bulk of the hexagonal SiC(0001) substrate and overcompensation by donor-like states related to the buffer layer. In this work, we evidence that this effect is also related to the specific underlying SiC terrace. We fabricated a periodic sequence of non-identical SiC terraces, which are unambiguously attributed to specific SiC surface terminations. A clear correlation between the SiC termination and the electronic graphene properties is experimentally observed and confirmed by various complementary surface-sensitive methods. We attribute this correlation to a proximity effect of the SiC termination-dependent polarization doping on the overlying graphene layer. Our findings open a new approach for a nano-scale doping-engineering by self-patterning of epitaxial graphene and other 2D layers on dielectric polar substrates.
△ Less
Submitted 30 May, 2020;
originally announced June 2020.
-
Thermoelectric signature of individual skyrmions
Authors:
Alexander Fernández Scarioni,
Craig Barton,
Héctor Corte-León,
Sibylle Sievers,
Xiukun Hu,
Fernando Ajejas,
William Legrand,
Nicolas Reyren,
Vincent Cros,
Olga Kazakova,
Hans W. Schumacher
Abstract:
We experimentally study the thermoelectrical signature of individual skyrmions in chiral Pt/Co/Ru multilayers. Using a combination of controlled nucleation, single skyrmion annihilation, and magnetic field dependent measurements the thermoelectric signature of individual skyrmions is characterized. The observed signature is explained by the anomalous Nernst effect of the skyrmions spin structure.…
▽ More
We experimentally study the thermoelectrical signature of individual skyrmions in chiral Pt/Co/Ru multilayers. Using a combination of controlled nucleation, single skyrmion annihilation, and magnetic field dependent measurements the thermoelectric signature of individual skyrmions is characterized. The observed signature is explained by the anomalous Nernst effect of the skyrmions spin structure. Possible topological contributions to the observed thermoelectrical signature are discussed. Such thermoelectrical characterization allows for non-invasive detection and counting of skyrmions and enables fundamental studies of topological thermoelectric effects on the nano scale
△ Less
Submitted 17 April, 2020; v1 submitted 28 January, 2020;
originally announced January 2020.
-
Uncertainty Analysis of Stray Field Measurements by Quantitative Magnetic Force Microscopy
Authors:
Xiukun Hu,
Gaoliang Dai,
Sibylle Sievers,
Alexander Fernández Scarioni,
Volker Neu,
Mark Bieler,
Hans Werner Schumacher
Abstract:
Magnetic force microscopy (MFM) measurements generally provide phase images which represent the signature of domain structures on the surface of nanomaterials. To quantitatively determine magnetic stray fields based on an MFM image requires calibrated properties of the magnetic tip. In this work, an approach is presented for calibrating a magnetic tip using a Co/Pt multilayered film as a reference…
▽ More
Magnetic force microscopy (MFM) measurements generally provide phase images which represent the signature of domain structures on the surface of nanomaterials. To quantitatively determine magnetic stray fields based on an MFM image requires calibrated properties of the magnetic tip. In this work, an approach is presented for calibrating a magnetic tip using a Co/Pt multilayered film as a reference sample which shows stable well-known magnetic properties and well-defined perpendicular band domains. The approach is based on a regularized deconvolution process in Fourier domain with a Wiener filter and the L-curve method for determining a suitable regularization parameter to get a physically reasonable result. The calibrated tip is applied for a traceable quantitative determination of the stray fields of a test sample which has a patial frequency spectrum covered by that of the reference sample. According to the "Guide to the expression of uncertainty in measurement", uncertainties of the processing algorithm are estimated considering the fact that the regularization influences significantly the quantitative analysis. We discuss relevant uncertainty components and their propagations between real domain and Fourier domain for both, the tip calibration procedure and the stray field calculation, and propose an uncertainty evaluation procedure for quantitative magnetic force microscopy.
△ Less
Submitted 19 February, 2020; v1 submitted 18 December, 2019;
originally announced December 2019.
-
Modal frustration and periodicity breaking in artificial spin ice
Authors:
R. Puttock,
A. Manzin,
V. Neu,
F. Garcia Sanchez,
A. Fernandez Scarioni,
H. W. Schumacher,
O. Kazakova
Abstract:
Here an artificial spin ice (ASI) lattice is introduced that exhibits unique Ising and non-Ising behavior under specific field switching protocols because of the inclusion of coupled nanomagnets into the unit cell. In the Ising regime, a magnetic switching mechanism that generates a uni- or bimodal distribution of states dependent on the alignment of the field is demonstrated with respect to the l…
▽ More
Here an artificial spin ice (ASI) lattice is introduced that exhibits unique Ising and non-Ising behavior under specific field switching protocols because of the inclusion of coupled nanomagnets into the unit cell. In the Ising regime, a magnetic switching mechanism that generates a uni- or bimodal distribution of states dependent on the alignment of the field is demonstrated with respect to the lattice unit cell. In addition, a method for generating a plethora of randomly distributed energy states across the lattice, consisting of Ising and Landau states, is investigated through magnetic force microscopy and micromagnetic modeling. We demonstrate that the dispersed energy distribution across the lattice is a result of the intrinsic design and can be finely tuned through control of the incident angle of a critical field. The present manuscript explores a complex frustrated environment beyond the 16-vertex Ising model for the development of novel logic-based technologies.
△ Less
Submitted 28 September, 2020; v1 submitted 16 September, 2019;
originally announced September 2019.
-
Substrate induced nanoscale resistance variation in epitaxial graphene
Authors:
Anna Sinterhauf,
Georg Alexander Traeger,
Davood Momeni Pakdehi,
Philip Schädlich,
Philip Willke,
Florian Speck,
Thomas Seyller,
Christoph Tegenkamp,
Klaus Pierz,
Hans Werner Schumacher,
Martin Wenderoth
Abstract:
Graphene, the first true two-dimensional material still reveals the most remarkable transport properties among the growing class of two-dimensional materials. Although many studies have investigated fundamental scattering processes, the surprisingly large variation in the experimentally determined resistances associated with a localized defect is still an open issue. Here, we quantitatively invest…
▽ More
Graphene, the first true two-dimensional material still reveals the most remarkable transport properties among the growing class of two-dimensional materials. Although many studies have investigated fundamental scattering processes, the surprisingly large variation in the experimentally determined resistances associated with a localized defect is still an open issue. Here, we quantitatively investigate the local transport properties of graphene prepared by polymer assisted sublimation growth (PASG) using scanning tunneling potentiometry. PASG graphene is characterized by a spatially homogeneous current density, which allows to analyze variations in the local electrochemical potential with high precision. We utilize this possibility by examining the local sheet resistance finding a significant variation of up to 270% at low temperatures. We identify a correlation of the sheet resistance with the stacking sequence of the 6H-SiC substrate as well as with the distance between the graphene sheet and the substrate. Our results experimentally quantify the strong impact of the graphene-substrate interaction on the local transport properties of graphene.
△ Less
Submitted 28 January, 2020; v1 submitted 8 August, 2019;
originally announced August 2019.
-
Liquid metal intercalation of epitaxial graphene: large-area gallenene layer fabrication through gallium self-propagation at ambient conditions
Authors:
S. Wundrack,
D. Momeni Pakdehi,
W. Dempwolf,
N. Schmidt,
K. Pierz,
L. Michaliszyn,
H. Spende,
A. Schmidt,
H. W. Schumacher,
R. Stosch,
A. Bakin
Abstract:
We demonstrate the fabrication of an ultra thin gallium film, also known as gallenene, beneath epitaxial graphene on 6H-SiC under ambient conditions triggered by liquid gallium intercalation. Gallenene has been fabricated using the liquid metal intercalation, achieving lateral intercalation and diffusion of Ga atoms at room temperature on square centimeter areas limited only by the graphene sample…
▽ More
We demonstrate the fabrication of an ultra thin gallium film, also known as gallenene, beneath epitaxial graphene on 6H-SiC under ambient conditions triggered by liquid gallium intercalation. Gallenene has been fabricated using the liquid metal intercalation, achieving lateral intercalation and diffusion of Ga atoms at room temperature on square centimeter areas limited only by the graphene samples' size. The stepwise self-propagation of the gallenene film below the epitaxial graphene surface on the macroscopic scale was observed by optical microscopy shortly after the initial processing without further physical or chemical treatment. Directional Ga diffusion of gallenene occurs on SiC terraces since the terrace steps form an energetic barrier (Ehrlich-Schwoebel barrier),retarding the gallenene propagation. The subsequent conversion of the epitaxial graphene into quasi free-standing bilayer graphene (QFBLG) and the graphene-gallenene heterostack interactions have been analyzed by XPS and Raman measurements. The results reveal a novel approach for controlled fabrication of wafer-scale gallenene as well as for two-dimensional heterostructures and stacks based on the interaction between liquid metal and epitaxial graphene.
Please note, this work was also titled as Graphene meets gallenene -- A straightforward approach to developing large-area heterostacks by gallium self-propagation https://www.researchgate.net/publication/333451130_Graphene_meets_gallenene_-_A_straightforward_approach_to_developing_large-area_heterostacks_by_gallium_self-propagation
△ Less
Submitted 16 July, 2020; v1 submitted 29 May, 2019;
originally announced May 2019.
-
Quantum dot state initialization by control of tunneling rates
Authors:
Tobias Wenz,
Jevgeny Klochan,
Frank Hohls,
Thomas Gerster,
Vyacheslavs Kashcheyevs,
Hans W. Schumacher
Abstract:
We study the loading of electrons into a quantum dot with dynamically controlled tunnel barriers. We introduce a method to measure tunneling rates for individual discrete states and to identify their relaxation paths. Exponential selectivity of the tunnel coupling enables loading into specific quantum dot states by tuning independently energy and rates. While for the single-electron case orbital r…
▽ More
We study the loading of electrons into a quantum dot with dynamically controlled tunnel barriers. We introduce a method to measure tunneling rates for individual discrete states and to identify their relaxation paths. Exponential selectivity of the tunnel coupling enables loading into specific quantum dot states by tuning independently energy and rates. While for the single-electron case orbital relaxation leads to fast transition into the ground state, for electron pairs triplet-to-singlet relaxation is suppressed by long spin-flip times. This enables the fast gate-controlled initialization of either a singlet or a triplet electron pair state in a quantum dot with broad potential applications in quantum technologies.
△ Less
Submitted 6 March, 2019;
originally announced March 2019.
-
Spincaloritronic measurements: a round robin comparison of the longitudinal spin Seebeck effect
Authors:
A. Sola,
V. Basso,
M. Kuepferling,
M. Pasquale,
D. Meier,
G. Reiss,
T. Kuschel,
T. Kikkawa,
K. Uchida,
E. Saitoh,
H. Jin,
S. Boona,
S. Watzman,
J. Heremans,
M. B. Jungfleisch,
W. Zhang,
J. E. Pearson,
A. Hoffmann,
H. W. Schumacher
Abstract:
The rising field of spin caloritronics focuses on the interactions between spin and heat currents in a magnetic material; the observation of the spin Seebeck effect opened the route to this branch of research. This paper reports the results of a round robin test performed by five partners on a single device highlighting the reproducibility problems related to the measurements of the spin Seebeck c…
▽ More
The rising field of spin caloritronics focuses on the interactions between spin and heat currents in a magnetic material; the observation of the spin Seebeck effect opened the route to this branch of research. This paper reports the results of a round robin test performed by five partners on a single device highlighting the reproducibility problems related to the measurements of the spin Seebeck coefficient, the quantity that describes the strength of the spin Seebeck effect. This work stimulated the search for more reproducible measurement methods through the analysis of the systematic effects.
△ Less
Submitted 3 December, 2018;
originally announced December 2018.
-
Homogeneous Large-area Quasi-freestanding Monolayer and Bilayer Graphene on SiC
Authors:
Davood Momeni Pakdehi,
Klaus Pierz,
Stefan Wundrack,
Johannes Aprojanz,
Thi Thuy Nhung Nguyen,
Thorsten Dziomba,
Frank Hohls,
Andrey Bakin,
Rainer Stosch,
Christoph Tegenkamp,
Franz J. Ahlers,
Hans W. Schumacher
Abstract:
In this study, we first show that the argon flow during epitaxial graphene growth is an important parameter to control the quality of the buffer and the graphene layer. Atomic force microscopy (AFM) and low-energy electron diffraction (LEED) measurements reveal that the decomposition of the SiC substrate strongly depends on the Ar mass flow rate while pressure and temperature are kept constant. Ou…
▽ More
In this study, we first show that the argon flow during epitaxial graphene growth is an important parameter to control the quality of the buffer and the graphene layer. Atomic force microscopy (AFM) and low-energy electron diffraction (LEED) measurements reveal that the decomposition of the SiC substrate strongly depends on the Ar mass flow rate while pressure and temperature are kept constant. Our data are interpreted by a model based on the competition of the SiC decomposition rate, controlled by the Ar flow, with a uniform graphene buffer layer formation under the equilibrium process at the SiC surface. The proper choice of a set of growth parameters allows the growth of defect-free, ultra-smooth and coherent graphene-free buffer layer and bilayer-free monolayer graphene sheets which can be transformed into large-area high-quality quasi-freestanding monolayer and bilayer graphene (QFMLG and QFBLG) by hydrogen intercalation. AFM, scanning tunneling microscopy (STM), Raman spectroscopy and electronic transport measurements underline the excellent homogeneity of the resulting quasi-freestanding layers. Electronic transport measurements in four-point probe configuration reveal a homogeneous low resistance anisotropy on both μm- and mm scales.
△ Less
Submitted 12 November, 2018;
originally announced November 2018.
-
Near-field magneto-caloritronic nanoscopy on ferromagnetic nanostructures
Authors:
E. Pfitzner,
X. Hu,
H. W. Schumacher,
A. Hoehl,
D. Venkateshvaran,
M. Cubukcu,
J. -W. Liao,
S. Auffret,
J. Heberle,
J. Wunderlich,
B. Kaestner
Abstract:
Near-field optical microscopy by means of infrared photocurrent mapping has rapidly developed in recent years. In this letter we introduce a near-field induced contrast mechanism arising when a conducting surface, exhibiting a magnetic moment, is exposed to a nanoscale heat source. The magneto-caloritronic response of the sample to near-field excitation of a localized thermal gradient leads to a c…
▽ More
Near-field optical microscopy by means of infrared photocurrent mapping has rapidly developed in recent years. In this letter we introduce a near-field induced contrast mechanism arising when a conducting surface, exhibiting a magnetic moment, is exposed to a nanoscale heat source. The magneto-caloritronic response of the sample to near-field excitation of a localized thermal gradient leads to a contrast determined by the local state of magnetization. By comparing the measured electric response of a magnetic reference sample with numerical simulations we derive an estimate of the field enhancement and the corresponding temperature profile induced on the sample surface.
△ Less
Submitted 31 August, 2018;
originally announced August 2018.
-
Tunnel magneto-Seebeck effect
Authors:
Timo Kuschel,
Michael Czerner,
Jakob Walowski,
Andy Thomas,
Hans Werner Schumacher,
Günter Reiss,
Christian Heiliger,
Markus Münzenberg
Abstract:
The interplay of charge, spin and heat transport is investigated in the fascinating research field of spin caloritronics, the marriage of spintronics and thermoelectrics. Here, many new spin-dependent thermal transport phenomena in magnetic nanostructures have been explored in the recent years. One of them is the tunnel magneto-Seebeck (TMS) effect in magnetic tunnel junctions (MTJs) that has larg…
▽ More
The interplay of charge, spin and heat transport is investigated in the fascinating research field of spin caloritronics, the marriage of spintronics and thermoelectrics. Here, many new spin-dependent thermal transport phenomena in magnetic nanostructures have been explored in the recent years. One of them is the tunnel magneto-Seebeck (TMS) effect in magnetic tunnel junctions (MTJs) that has large potential for future nanoelectronic devices, such as nanostructured sensors for three-dimentional thermal gradients, or scanning tunneling microscopes driven by temperature differences. The TMS describes the dependence of the MTJ's thermopower on its magnetic cofiguration when a thermal gradient is applied. In this review, we highlight the successful way from first observation of the TMS in 2011 to current ongoing developments in this research area. We emphasize on different heating techniques, material designs, applications, and additional physical aspects such as the role of the thermal conductivity of the barrier material. We further demonstrate the efficient interplay between ab initio calculations and experiments within this field, as this has led, e.g., to the detection of large TMS ratios in MTJs with half-metallic Heusler electrodes.
△ Less
Submitted 6 November, 2018; v1 submitted 16 August, 2018;
originally announced August 2018.
-
Electronic transport in high magnetic fields of thin film MnSi
Authors:
Nico Steinki,
David Schroeter,
Niels Wächter,
Dirk Menzel,
Hans Werner Schumacher,
Ilya Sheikin,
Stefan Süllow
Abstract:
We present a study of the magnetoresistivity of thin film MnSi in high magnetic fields. We establish that the magnetoresistivity can be understood in terms of spin fluctuation theory, allowing us to compare our data to studies of bulk material. Despite of a close qualitative resemblance of bulk and thin film data, there are clear quantitative differences. We propose that these reflect a difference…
▽ More
We present a study of the magnetoresistivity of thin film MnSi in high magnetic fields. We establish that the magnetoresistivity can be understood in terms of spin fluctuation theory, allowing us to compare our data to studies of bulk material. Despite of a close qualitative resemblance of bulk and thin film data, there are clear quantitative differences. We propose that these reflect a difference of the spin fluctuation spectra in thin film and bulk material MnSi.
△ Less
Submitted 26 June, 2018; v1 submitted 20 June, 2018;
originally announced June 2018.
-
Excitation and coherent control of magnetization dynamics in magnetic tunnel junctions using acoustic pulses
Authors:
H. F. Yang,
F. Garcia-Sanchez,
X. K. Hu,
S. Sievers,
T. Böhnert,
J. D. Costa,
M. Tarequzzaman,
R. Ferreira,
M. Bieler,
H. W. Schumacher
Abstract:
We experimentally study magnetization dynamics in magnetic tunnel junctions driven by femtosecond-laser-induced surface acoustic waves. The acoustic pulses induce a magnetization precession in the free layer of the magnetic tunnel junction through magnetoelastic coupling. The frequency and amplitude of the precession shows a pronounced dependence on the applied magnetic field and the laser excitat…
▽ More
We experimentally study magnetization dynamics in magnetic tunnel junctions driven by femtosecond-laser-induced surface acoustic waves. The acoustic pulses induce a magnetization precession in the free layer of the magnetic tunnel junction through magnetoelastic coupling. The frequency and amplitude of the precession shows a pronounced dependence on the applied magnetic field and the laser excitation position. Comparing the acoustic-wave-induced precession frequencies with precession induced by charge currents and with micromagnetic simulations we identify spatially non-uniform magnetization modes localized close the edge regions as being responsible for the optically induced magnetization dynamics. The experimental scheme even allows us to coherently control the magnetization precession using two acoustic pulses. This might prove important for future applications requiring ultrafast spin manipulation. Additionally, our results directly pinpoint the importance of acoustic pulses since they could be relevant when investigating optically-induced temperature effects in magnetic structures.
△ Less
Submitted 27 April, 2018;
originally announced April 2018.
-
Nonmonotonous classical magneto-conductivity of a two-dimensional electron gas in a disordered array of obstacles
Authors:
N. H. Siboni,
J. Schluck,
K. Pierz,
H. W. Schumacher,
D. Kazazis,
J. Horbach,
T. Heinzel
Abstract:
Magnetotransport measurements in combination with molecular dynamics (MD) simulations on two-dimensional disordered Lorentz gases in the classical regime are reported. In quantitative agreement between experiment and simulation, the magnetoconductivity displays a pronounced peak as a function of perpendicular magnetic field $B$ which cannot be explained in the framework of existing kinetic theorie…
▽ More
Magnetotransport measurements in combination with molecular dynamics (MD) simulations on two-dimensional disordered Lorentz gases in the classical regime are reported. In quantitative agreement between experiment and simulation, the magnetoconductivity displays a pronounced peak as a function of perpendicular magnetic field $B$ which cannot be explained in the framework of existing kinetic theories. We show that this peak is linked to the onset of a directed motion of the electrons along the contour of the disordered obstacle matrix when the cyclotron radius becomes smaller than the size of the obstacles. This directed motion leads to transient superdiffusive motion and strong scaling corrections in the vicinity of the insulator-to-conductor transitions of the Lorentz gas.
△ Less
Submitted 3 August, 2017;
originally announced August 2017.
-
MnSi-nanostructures obtained from thin films: magnetotransport and Hall effect
Authors:
D. Schroeter,
N. Steinki,
M. Schilling,
A. Fernández Scarioni,
P. Krzysteczko,
T. Dziomba,
H. W. Schumacher,
D. Menzel,
S. Süllow
Abstract:
We present a comparative study of the (magneto)transport properties, including Hall effect, of bulk, thin film and nanostructured MnSi. In order to set our results in relation to published data we extensively characterize our materials, this way establishing a comparatively good sample quality. Our analysis reveals that in particular for thin film and nanostructured material, there are extrinsic a…
▽ More
We present a comparative study of the (magneto)transport properties, including Hall effect, of bulk, thin film and nanostructured MnSi. In order to set our results in relation to published data we extensively characterize our materials, this way establishing a comparatively good sample quality. Our analysis reveals that in particular for thin film and nanostructured material, there are extrinsic and intrinsic contributions to the electronic transport properties, which by modeling the data we separate out. Finally, we discuss our Hall effect data of nanostructured MnSi under consideration of the extrinsic contributions and with respect to the question of the detection of a topological Hall effect in a skyrmionic phase.
△ Less
Submitted 5 February, 2018; v1 submitted 13 June, 2017;
originally announced June 2017.
-
Investigation of a possible electronic phase separation in the magnetic semiconductors Ga$_{1-x}$Mn$_{x}$As and Ga$_{1-x}$Mn$_{x}$P by means of fluctuation spectroscopy
Authors:
Martin Lonsky,
Jan Teschabai-Oglu,
Klaus Pierz,
Sibylle Sievers,
Hans Werner Schumacher,
Ye Yuan,
Roman Böttger,
Shengqiang Zhou,
Jens Müller
Abstract:
We present systematic temperature-dependent resistance noise measurements on a series of ferromagnetic Ga$_{1-x}$Mn$_{x}$As epitaxial thin films covering a large parameter space in terms of the Mn content $x$ and other variations regarding sample fabrication. We infer that the electronic noise is dominated by switching processes related to impurities in the entire temperature range. While metallic…
▽ More
We present systematic temperature-dependent resistance noise measurements on a series of ferromagnetic Ga$_{1-x}$Mn$_{x}$As epitaxial thin films covering a large parameter space in terms of the Mn content $x$ and other variations regarding sample fabrication. We infer that the electronic noise is dominated by switching processes related to impurities in the entire temperature range. While metallic compounds with $x>2$ % do not exhibit any significant change in the low-frequency resistance noise around the Curie temperature $T_\mathrm{C}$, we find indications for an electronic phase separation in films with $x<2$ % in the vicinity of $T_\mathrm{C}$, manifesting itself in a maximum in the noise power spectral density. These results are compared with noise measurements on an insulating Ga$_{1-x}$Mn$_{x}$P reference sample, for which the evidence for an electronic phase separation is even stronger and a possible percolation of bound magnetic polarons is discussed. Another aspect addressed in this work is the effect of ion-irradiation induced disorder on the electronic properties of Ga$_{1-x}$Mn$_{x}$As films and, in particular, whether any electronic inhomogeneities can be observed in this case. Finally, we put our findings into the context of the ongoing debate on the electronic structure and the development of spontaneous magnetization in these materials.
△ Less
Submitted 17 November, 2017; v1 submitted 8 May, 2017;
originally announced May 2017.
-
Tailoring the SiC surface - a morphology study on the epitaxial growth of graphene and its buffer layer
Authors:
Mattias Kruskopf,
Klaus Pierz,
Davood Momeni Pakdehi,
Stefan Wundrack,
Rainer Stosch,
Andrey Bakin,
Hans W. Schumacher
Abstract:
We investigate the growth of the graphene buffer layer and the involved step bunching behavior of the silicon carbide substrate surface using atomic force microscopy. The formation of local buffer layer domains are identified to be the origin of undesirably high step edges in excellent agreement with the predictions of a general model of step dynamics. The applied polymer-assisted sublimation grow…
▽ More
We investigate the growth of the graphene buffer layer and the involved step bunching behavior of the silicon carbide substrate surface using atomic force microscopy. The formation of local buffer layer domains are identified to be the origin of undesirably high step edges in excellent agreement with the predictions of a general model of step dynamics. The applied polymer-assisted sublimation growth method demonstrates that the key principle to suppress this behavior is the uniform nucleation of the buffer layer. In this way, the silicon carbide surface is stabilized such that ultra-flat surfaces can be conserved during graphene growth on a large variety of silicon carbide substrate surfaces. The analysis of the experimental results describes different growth modes which extend the current understanding of epitaxial graphene growth by emphasizing the importance of buffer layer nucleation and critical mass transport processes.
△ Less
Submitted 10 July, 2017; v1 submitted 26 April, 2017;
originally announced April 2017.
-
Nano scale thermo-electrical detection of magnetic domain wall propagation
Authors:
Patryk Krzysteczko,
James Wells,
Alexander Fernandez Scarioni,
Zbynek Soban,
Tomas Janda,
Xiukun Hu,
Vit Saidl,
Richard P. Campion,
Rhodri Mansell,
Ji-Hyun Lee,
Russell P. Cowburn,
Petr Nemec,
Olga Kazakova,
Joerg Wunderlich,
Hans Werner Schumacher
Abstract:
In magnetic nanowires with perpendicular magnetic anisotropy (PMA) magnetic domain walls (DW) are narrow and can move rapidly driven by current induced torques. This enables important applications like high-density memories for which the precise detection of the position and motion of a propagating DW is of utmost interest. Today's DW detection tools are often limited in resolution, or acquisition…
▽ More
In magnetic nanowires with perpendicular magnetic anisotropy (PMA) magnetic domain walls (DW) are narrow and can move rapidly driven by current induced torques. This enables important applications like high-density memories for which the precise detection of the position and motion of a propagating DW is of utmost interest. Today's DW detection tools are often limited in resolution, or acquisition speed, or can only be applied on specific materials. Here, we show that the anomalous Nernst effect provides a simple and powerful tool to precisely track the position and motion of a single DW propagating in a PMA nanowire. We detect field and current driven DW propagation in both metallic heterostructures and dilute magnetic semiconductors over a broad temperature range. The demonstrated spatial resolution below 20 nm is comparable to the DW width in typical metallic PMA systems.
△ Less
Submitted 23 November, 2016;
originally announced November 2016.
-
Comeback of epitaxial graphene for electronics: large-area growth of bilayer-free graphene on SiC
Authors:
Mattias Kruskopf,
Davood Momeni Pakdehi,
Klaus Pierz,
Stefan Wundrack,
Rainer Stosch,
Thorsten Dziomba,
Martin Goetz,
Jens Baringhaus,
Johannes Aprojanz,
Christoph Tegenkamp,
Jakob Lidzba,
Thomas Seyller,
Frank Hohls,
Franz J. Ahlers,
Hans W. Schumacher
Abstract:
We present a new fabrication method for epitaxial graphene on SiC which enables the growth of ultra-smooth defect- and bilayer-free graphene sheets with an unprecedented reproducibility, a necessary prerequisite for wafer-scale fabrication of high quality graphene-based electronic devices. The inherent but unfavorable formation of high SiC surface terrace steps during high temperature sublimation…
▽ More
We present a new fabrication method for epitaxial graphene on SiC which enables the growth of ultra-smooth defect- and bilayer-free graphene sheets with an unprecedented reproducibility, a necessary prerequisite for wafer-scale fabrication of high quality graphene-based electronic devices. The inherent but unfavorable formation of high SiC surface terrace steps during high temperature sublimation growth is suppressed by rapid formation of the graphene buffer layer which stabilizes the SiC surface. The enhanced nucleation is enforced by decomposition of polymer adsorbates which act as a carbon source. With most of the steps well below 0.75 nm pure monolayer graphene without bilayer inclusions is formed with lateral dimensions only limited by the size of the substrate. This makes the polymer assisted sublimation growth technique the most promising method for commercial wafer scale epitaxial graphene fabrication. The extraordinary electronic quality is evidenced by quantum resistance metrology at 4.2 K with until now unreached precision and high electron mobilities on mm scale devices.
△ Less
Submitted 6 June, 2016;
originally announced June 2016.
-
Validation of a quantized-current source with 0.2 ppm uncertainty
Authors:
Friederike Stein,
Dietmar Drung,
Lukas Fricke,
Hansjörg Scherer,
Frank Hohls,
Christoph Leicht,
Martin Götz,
Christian Krause,
Ralf Behr,
Eckart Pesel,
Klaus Pierz,
Uwe Siegner,
Franz-Josef Ahlers,
Hans W. Schumacher
Abstract:
We report on high-accuracy measurements of quantized current, sourced by a tunable-barrier single-electron pump at frequencies $f$ up to $1$ GHz. The measurements were performed with a new picoammeter instrument, traceable to the Josephson and quantum Hall effects. Current quantization according to $I=ef$ with $e$ the elementary charge was confirmed at $f=545$ MHz with a total relative uncertainty…
▽ More
We report on high-accuracy measurements of quantized current, sourced by a tunable-barrier single-electron pump at frequencies $f$ up to $1$ GHz. The measurements were performed with a new picoammeter instrument, traceable to the Josephson and quantum Hall effects. Current quantization according to $I=ef$ with $e$ the elementary charge was confirmed at $f=545$ MHz with a total relative uncertainty of 0.2 ppm, improving the state of the art by about a factor of 5. For the first time, the accuracy of a possible future quantum current standard based on single-electron transport was experimentally validated to be better than the best realization of the ampere within the present SI.
△ Less
Submitted 19 June, 2015;
originally announced June 2015.
-
Lissajous rocking ratchet
Authors:
S. Platonov,
B. Kästner,
H. W. Schumacher,
S. Kohler,
S. Ludwig
Abstract:
Breaking time-reversal symmetry (TRS) in the absence of a net bias can give rise to directed steady-state non-equilibrium transport phenomena such as ratchet effects. Here we present, theoretically and experimentally, the concept of a Lissajous rocking ratchet as an instrument based on breaking TRS. Our system is a semiconductor quantum dot (QD) with periodically modulated dot-lead tunnel barriers…
▽ More
Breaking time-reversal symmetry (TRS) in the absence of a net bias can give rise to directed steady-state non-equilibrium transport phenomena such as ratchet effects. Here we present, theoretically and experimentally, the concept of a Lissajous rocking ratchet as an instrument based on breaking TRS. Our system is a semiconductor quantum dot (QD) with periodically modulated dot-lead tunnel barriers. Broken TRS gives rise to single electron tunneling current. Its direction is fully controlled by exploring frequency and phase relations between the two barrier modulations. The concept of Lissajous ratchets can be realized in a large variety of different systems, including nano-electrical, nano-electromechanical or superconducting circuits. It promises applications based on a detailed on-chip comparison of radio-frequency signals.
△ Less
Submitted 13 March, 2015;
originally announced March 2015.
-
Commensurability resonances in two-dimensional magneto-electric lateral superlattices
Authors:
J. Schluck,
S. Fasbender,
T. Heinzel,
K. Pierz,
H. W. Schumacher,
D. Kazazis,
U. Gennser
Abstract:
Hybrid lateral superlattices composed of a square array of antidots and a periodic one-dimensional magnetic modulation are prepared in $\mathrm{Ga[Al]As}$ heterostructures. The two-dimensional electron gases exposed to these superlattices are characterized by magnetotransport experiments in vanishing average perpendicular magnetic fields. Despite the absence of closed orbits, the diagonal magnetor…
▽ More
Hybrid lateral superlattices composed of a square array of antidots and a periodic one-dimensional magnetic modulation are prepared in $\mathrm{Ga[Al]As}$ heterostructures. The two-dimensional electron gases exposed to these superlattices are characterized by magnetotransport experiments in vanishing average perpendicular magnetic fields. Despite the absence of closed orbits, the diagonal magnetoresistivity in the direction perpendicular to the magnetic modulation shows pronounced classical resonances. They are located at magnetic fields where snake trajectories exist which are quasi-commensurate with the antidot lattice. The diagonal magnetoresistivity in the direction of the magnetic modulation increases sharply above a threshold magnetic field and shows no fine structure. The experimental results are interpreted with the help of numerical simulations based on the semiclassical Kubo model.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
-
Epitaxial graphene on SiC: Modification of structural and electron transport properties by substrate pretreatment
Authors:
Mattias Kruskopf,
Klaus Pierz,
Stefan Wundrack,
Rainer Stosch,
Thorsten Dziomba,
Cay-Christian Kalmbach,
André Müller,
Jens Baringhaus,
Christoph Tegenkamp,
Franz J. Ahlers,
Hans W. Schumacher
Abstract:
The electrical transport properties of epitaxial graphene layers are correlated with the SiC surface morphology. In this study we show by atomic force microscopy and Raman measurements that the surface morphology and the structure of the epitaxial graphene layers change significantly when different pretreatment procedures are applied to nearly on-axis 6H-SiC(0001) substrates. It turns out that the…
▽ More
The electrical transport properties of epitaxial graphene layers are correlated with the SiC surface morphology. In this study we show by atomic force microscopy and Raman measurements that the surface morphology and the structure of the epitaxial graphene layers change significantly when different pretreatment procedures are applied to nearly on-axis 6H-SiC(0001) substrates. It turns out that the often used hydrogen etching of the substrate is responsible for undesirable high macro steps evolving during graphene growth. A more advantageous type of sub-nanometer stepped graphene layers is obtained with a new method: a high-temperature conditioning of the SiC surface in argon atmosphere. The results can be explained by the observed graphene buffer layer domains after the conditioning process which suppress giant step bunching and graphene step flow growth. The superior electronic quality is demonstrated by a less extrinsic resistance anisotropy obtained in nano-probe transport experiments and by the excellent quantization of the Hall resistance in low-temperature magneto-transport measurements. The quantum Hall resistance agrees with the nominal value (half of the von Klitzing constant) within a standard deviation of 4.5*10(-9) which qualifies this method for the fabrication of electrical quantum standards.
△ Less
Submitted 27 April, 2015; v1 submitted 13 February, 2015;
originally announced February 2015.
-
Domain wall magneto-Seebeck effect
Authors:
Patryk Krzysteczko,
Xiukun Hu,
Niklas Liebing,
Sibylle Sievers,
Hans W. Schumacher
Abstract:
The interplay between charge, spin, and heat currents in magnetic nano systems subjected to a temperature gradient has lead to a variety of novel effects and promising applications studied in the fast-growing field of spincaloritronics. Here we explore the magnetothermoelectrical properties of an individual magnetic domain wall in a permalloy nanowire. In thermal gradients of the order of few Kelv…
▽ More
The interplay between charge, spin, and heat currents in magnetic nano systems subjected to a temperature gradient has lead to a variety of novel effects and promising applications studied in the fast-growing field of spincaloritronics. Here we explore the magnetothermoelectrical properties of an individual magnetic domain wall in a permalloy nanowire. In thermal gradients of the order of few Kelvin per micrometer along the long wire axis, we find a clear magneto-Seebeck signature due to the presence of a single domain wall. The observed domain wall magneto-Seebeck effect can be explained by the magnetization-dependent Seebeck coefficient of permalloy in combination with the local spin configuration of the domain wall.
△ Less
Submitted 29 December, 2014;
originally announced December 2014.
-
Towards wafer scale inductive characterization of spin transfer torque critical current density of magnetic tunnel junction stacks
Authors:
Sibylle Sievers,
Niklas Liebing,
Santiago Serrano-Guisan,
Ricardo Ferreira,
Elvira Paz,
Ambra Caprile,
Alessandra Manzin,
Massimo Pasquale,
Witold Skowroński,
Tomasz Stobiecki,
Karsten Rott,
Günter Reiss,
Jürgen Langer,
Berthold Ocker,
Hans Werner Schumacher
Abstract:
We explore the prospects of wafer scale inductive probing of the critical current density $j^{c0}$ for spin transfer torque switching of a CoFeB/MgO/CoFeB magnetic tunnel junction with varying MgO thickness. From inductive measurements magnetostatic parameters and the effective damping are derived and $j^{c0}$ is calculated based on spin transfer torque equations. The inductive values compare well…
▽ More
We explore the prospects of wafer scale inductive probing of the critical current density $j^{c0}$ for spin transfer torque switching of a CoFeB/MgO/CoFeB magnetic tunnel junction with varying MgO thickness. From inductive measurements magnetostatic parameters and the effective damping are derived and $j^{c0}$ is calculated based on spin transfer torque equations. The inductive values compare well to the values derived from current induced switching measurements on individual nanopillars. Using a wafer scale inductive probe head could in the future enable wafer probe station based metrology of $j^{c0}$.
△ Less
Submitted 18 November, 2014;
originally announced November 2014.
-
Partitioning of on-demand electron pairs
Authors:
Niels Ubbelohde,
Frank Hohls,
Vyacheslavs Kashcheyevs,
Timo Wagner,
Lukas Fricke,
Bernd Kästner,
Klaus Pierz,
Hans W. Schumacher,
Rolf J. Haug
Abstract:
We demonstrate the high fidelity splitting of electron pairs emitted on demand from a dynamic quantum dot by an electronic beam splitter. The fidelity of pair splitting is inferred from the coincidence of arrival in two detector paths probed by a measurement of the partitioning noise. The emission characteristic of the on-demand electron source is tunable from electrons being partitioned equally a…
▽ More
We demonstrate the high fidelity splitting of electron pairs emitted on demand from a dynamic quantum dot by an electronic beam splitter. The fidelity of pair splitting is inferred from the coincidence of arrival in two detector paths probed by a measurement of the partitioning noise. The emission characteristic of the on-demand electron source is tunable from electrons being partitioned equally and independently to electron pairs being split with a fidelity of 90%. For low beam splitter transmittance we further find evidence of pair bunching violating statistical expectations for independent fermions.
△ Less
Submitted 31 March, 2014;
originally announced April 2014.
-
A self-referenced single-electron quantized-current source
Authors:
Lukas Fricke,
Michael Wulf,
Bernd Kaestner,
Frank Hohls,
Philipp Mirovsky,
Brigitte Mackrodt,
Ralf Dolata,
Thomas Weimann,
Klaus Pierz,
Uwe Siegner,
Hans W. Schumacher
Abstract:
With the anticipated redefinition of the international system of units (SI) the base units will be linked to fundamental constants of nature [1]. As for the electrical base unit "Ampere", it will be linked to the elementary charge e, requiring a corresponding quantum standard [2, 3]. Many concepts for such a standard have been investigated [4-14] relying on controlling the time-dependent tunnellin…
▽ More
With the anticipated redefinition of the international system of units (SI) the base units will be linked to fundamental constants of nature [1]. As for the electrical base unit "Ampere", it will be linked to the elementary charge e, requiring a corresponding quantum standard [2, 3]. Many concepts for such a standard have been investigated [4-14] relying on controlling the time-dependent tunnelling of electrons. However, the stochastic nature of quantum mechanical tunnelling intrinsically evokes uncontrolled deviations from the nominally quantized current. Alternatively, the counting of electrons [15, 16] has been explored but is severely limited in current amplitude and uncertainty by the low detector bandwidth. The late M. Wulf proposed [17] that this fundamental problem of electrical quantum metrology could be overcome by combining serial single-electron pumps with charge detectors allowing the generation of a quantized current and the in-situ detection of its stochastic deviations. Here, we experimentally demonstrate such quantized-current generation with in-situ detection of tunnelling errors at low frequencies and a reduction of the total current uncertainty by more than one order of magnitude. After frequency scaling this should enable a validated primary standard for the redefined SI base unit Ampere.
△ Less
Submitted 19 December, 2013;
originally announced December 2013.
-
Magneto-thermoelectric figure of merit of Co/Cu multilayers
Authors:
X. K. Hu,
P. Krzysteczko,
N. Liebing,
S. Serrano-Guisan,
K. Rott,
G. Reiss,
J. Kimling,
T. Böhnert,
K. Nielsch,
H. W. Schumacher
Abstract:
The switching of the magnetization configurations of giant magnetoresistance multilayer stacks not only changes the electric and thermal conductivities, but also the thermopower. We study the magnetotransport and the magneto-thermoelectric properties of Co/Cu multilayer devices in a lateral thermal gradient. We derive values of the Seebeck coefficient, the thermoelectric figure of merit, and the t…
▽ More
The switching of the magnetization configurations of giant magnetoresistance multilayer stacks not only changes the electric and thermal conductivities, but also the thermopower. We study the magnetotransport and the magneto-thermoelectric properties of Co/Cu multilayer devices in a lateral thermal gradient. We derive values of the Seebeck coefficient, the thermoelectric figure of merit, and the thermoelectric power factor. The Seebeck coefficient reaches values up to -18 microvolt/K at room temperature and shows a magnetic field dependence up to 28.6 % upon spin reversal. In combination with thermal conductivity data of the same Co/Cu stack, we find a spin dependence of the thermoelectric figure of merit of up to 65 %. Furthermore, a spin dependence of the power factor of up to 110 % is derived.
△ Less
Submitted 13 November, 2013;
originally announced November 2013.
-
Unusual angular dependence of tunneling magneto-Seebeck effect
Authors:
Christian Heiliger,
Michael Czerner,
Niklas Liebing,
Santiago Serrano-Guisan,
Karsten Rott,
Günter Reiss,
Hans W. Schumacher
Abstract:
We find an unusual angular dependence of the tunneling magneto-Seebeck effect (TMS). The conductance shows normally a cosine-dependence with the angle between the magnetizations of the two ferromagnetic leads. In contrast, the angular dependence of the TMS depends strongly on the tunneling magneto resistance (TMR) ratio. For small TMR ratios we obtain also a cosine-dependence whereas for very larg…
▽ More
We find an unusual angular dependence of the tunneling magneto-Seebeck effect (TMS). The conductance shows normally a cosine-dependence with the angle between the magnetizations of the two ferromagnetic leads. In contrast, the angular dependence of the TMS depends strongly on the tunneling magneto resistance (TMR) ratio. For small TMR ratios we obtain also a cosine-dependence whereas for very large TMR ratios the angular dependence approaches a step-like function.
△ Less
Submitted 12 November, 2013;
originally announced November 2013.
-
Influence of sample geometry on inductive damping measurement methods
Authors:
N. Liebing,
S. Serrano-Guisan,
A. Caprile,
E. S. Olivetti,
F. Celegato,
M. Pasquale,
A. Müller,
H. W. Schumacher
Abstract:
We study the precession frequency and effective damping of patterned permalloy thin films of different geometry using integrated inductive test structures. The test structures consist of coplanar wave guides fabricated onto patterned permalloy stripes of different geometry. The width, length and position of the permalloy stripe with respect to the center conductor of the wave guide are varied. The…
▽ More
We study the precession frequency and effective damping of patterned permalloy thin films of different geometry using integrated inductive test structures. The test structures consist of coplanar wave guides fabricated onto patterned permalloy stripes of different geometry. The width, length and position of the permalloy stripe with respect to the center conductor of the wave guide are varied. The precession frequency and effective damping of the different devices is derived by inductive measurements in time and frequency domain in in-plane magnetic fields. While the precession frequencies do not reveal a significant dependence on the sample geometry we find a decrease of the measured damping with increasing width of the permalloy centered underneath the center conductor of the coplanar wave guide. We attribute this effect to an additional damping contribution due to inhomogeneous line broadening at the edges of the permalloy stripes which does not contribute to the inductive signal provided the permalloy stripe is wider than the center conductor. Consequences for inductive determination of the effective damping using such integrated reference samples are discussed.
△ Less
Submitted 29 October, 2013;
originally announced October 2013.
-
Towards wafer scale inductive determination of magnetostatic and dynamic parameters of magnetic thin films and multilayers
Authors:
Sibylle Sievers,
Niklas Liebing,
Paul Nass,
Santiago Serrano-Guisan,
Massimo Pasquale,
Hans Werner Schumacher
Abstract:
We investigate an inductive probe head suitable for non-invasive characterization of the magnetostatic and dynamic parameters of magnetic thin films and multilayers on the wafer scale. The probe is based on a planar waveguide with rearward high frequency connectors that can be brought in close contact to the wafer surface. Inductive characterization of the magnetic material is carried out by vecto…
▽ More
We investigate an inductive probe head suitable for non-invasive characterization of the magnetostatic and dynamic parameters of magnetic thin films and multilayers on the wafer scale. The probe is based on a planar waveguide with rearward high frequency connectors that can be brought in close contact to the wafer surface. Inductive characterization of the magnetic material is carried out by vector network analyzer ferromagnetic resonance. Analysis of the field dispersion of the resonance allows the determination of key material parameters such as the saturation magnetization MS or the effective damping parameter Meff. Three waveguide designs are tested. The broadband frequency response is characterized and the suitability for inductive determination of MS and Meff is compared. Integration of such probes in a wafer prober could in the future allow wafer scale in-line testing of magnetostatic and dynamic key material parameters of magnetic thin films and multilayers.
△ Less
Submitted 24 October, 2013;
originally announced October 2013.
-
Broadband ferromagnetic resonance characterization of GaMnAs thin films
Authors:
Aymen Ben Hamida,
Sibylle Sievers,
Klaus Pierz,
Hans Werner Schumacher
Abstract:
The precessional magnetization dynamics of GaMnAs thin films are characterized by broadband network analyzer ferromagnetic resonance (FMR) in a coplanar geometry at cryogenic temperatures. The FMR frequencies are characterized as function of in-plane field angle and field amplitude. Using an extended Kittel model of the FMR dispersion the magnetic film parameters such as saturation magnetization a…
▽ More
The precessional magnetization dynamics of GaMnAs thin films are characterized by broadband network analyzer ferromagnetic resonance (FMR) in a coplanar geometry at cryogenic temperatures. The FMR frequencies are characterized as function of in-plane field angle and field amplitude. Using an extended Kittel model of the FMR dispersion the magnetic film parameters such as saturation magnetization and anisotropies are derived. The modification of the FMR behavior and of the magnetic parameters of the thin film upon annealing is analyzed.
△ Less
Submitted 6 August, 2013;
originally announced August 2013.
-
Bilayer Graphene Quantum Dot Defined by Topgates
Authors:
André Müller,
Bernd Kaestner,
Frank Hohls,
Thomas Weimann,
Klaus Pierz,
Hans W. Schumacher
Abstract:
We investigate the application of nanoscale topgates on exfoliated bilayer graphene to define quantum dot devices. At temperatures below 500 mK the conductance underneath the grounded gates is suppressed, which we attribute to nearest neighbour hopping and strain-induced piezoelectric fields. The gate-layout can thus be used to define resistive regions by tuning into the corresponding temperature…
▽ More
We investigate the application of nanoscale topgates on exfoliated bilayer graphene to define quantum dot devices. At temperatures below 500 mK the conductance underneath the grounded gates is suppressed, which we attribute to nearest neighbour hopping and strain-induced piezoelectric fields. The gate-layout can thus be used to define resistive regions by tuning into the corresponding temperature range. We use this method to define a quantum dot structure in bilayer graphene showing Coulomb blockade oscillations consistent with the gate layout.
△ Less
Submitted 19 March, 2014; v1 submitted 29 April, 2013;
originally announced April 2013.
-
Tunneling magneto thermocurrent in CoFeB/MgO/CoFeB based magnetic tunnel junctions
Authors:
Niklas Liebing,
Santiago Serrano-Guisan,
Patryk Krzysteczko,
Karsten Rott,
Günter Reiss,
Jürgen Langer,
Berthold Ocker,
Hans Werner Schumacher
Abstract:
We study the tunneling magneto thermopower and tunneling magneto thermocurrent of CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJ). The devices show a clear change of the thermoelectric properties upon reversal of the magnetisation of the CoFeB layers from parallel to the antiparallel orientation. When switching from parallel to antiparallel the thermopower increases by up to 55% where as the therm…
▽ More
We study the tunneling magneto thermopower and tunneling magneto thermocurrent of CoFeB/MgO/CoFeB magnetic tunnel junctions (MTJ). The devices show a clear change of the thermoelectric properties upon reversal of the magnetisation of the CoFeB layers from parallel to the antiparallel orientation. When switching from parallel to antiparallel the thermopower increases by up to 55% where as the thermocurrent drops by 45%. These observations can be well explained by the Onsager relations taking into account the tunneling magneto resistance of the MTJ. These findings contrast previous studies on AlO based MTJ systems, revealing tunneling magneto thermo power but no tunneling magneto thermocurrent.
△ Less
Submitted 17 April, 2013;
originally announced April 2013.
-
Towards quantized current arbitrary waveform synthesis
Authors:
P. Mirovsky,
L. Fricke,
F. Hohls,
B. Kaestner,
Ch. Leicht,
K. Pierz,
J. Melcher,
H. W. Schumacher
Abstract:
The generation of ac modulated quantized current waveforms using a semiconductor non-adiabatic single electron pump is demonstrated. In standard operation the single electron pump generates a quantized output current of I = ef where e is the charge of the electron and f is the pumping frequency. Suitable frequency modulation of f allows the generation of ac modulated output currents with different…
▽ More
The generation of ac modulated quantized current waveforms using a semiconductor non-adiabatic single electron pump is demonstrated. In standard operation the single electron pump generates a quantized output current of I = ef where e is the charge of the electron and f is the pumping frequency. Suitable frequency modulation of f allows the generation of ac modulated output currents with different characteristics. By sinusoidal and saw tooth like modulation of f accordingly modulated quantized current waveforms with kHz modulation frequencies and peak currents up to 100 pA are obtained. Such ac quantized current sources could find applications ranging from precision ac metrology to on-chip signal generation.
△ Less
Submitted 22 March, 2013;
originally announced March 2013.
-
Counting statistics for electron capture in a dynamic quantum dot
Authors:
Lukas Fricke,
Michael Wulf,
Bernd Kaestner,
Vyacheslavs Kashcheyevs,
Janis Timoshenko,
Pavel Nazarov,
Frank Hohls,
Philipp Mirovsky,
Brigitte Mackrodt,
Ralf Dolata,
Thomas Weimann,
Klaus Pierz,
Hans W. Schumacher
Abstract:
We report non-invasive single-charge detection of the full probability distribution $P_n$ of the initialization of a quantum dot with $n$ electrons for rapid decoupling from an electron reservoir. We analyze the data in the context of a model for sequential tunneling pinch-off, which has generic solutions corresponding to two opposing mechanisms. One limit considers sequential "freeze out" of an a…
▽ More
We report non-invasive single-charge detection of the full probability distribution $P_n$ of the initialization of a quantum dot with $n$ electrons for rapid decoupling from an electron reservoir. We analyze the data in the context of a model for sequential tunneling pinch-off, which has generic solutions corresponding to two opposing mechanisms. One limit considers sequential "freeze out" of an adiabatically evolving grand canonical distribution, the other one is an athermal limit equivalent to the solution of a generalized decay cascade model. We identify the athermal capturing mechanism in our sample, testifying to the high precision of our combined theoretical and experimental methods. The distinction between the capturing mechanisms allows to derive efficient experimental strategies for improving the initialization.
△ Less
Submitted 8 November, 2012;
originally announced November 2012.
-
Impact of current paths on measurement of tunneling magnetoresistance and spin torque critical current densities in GaMnAs-based magnetic tunnel junctions
Authors:
Aymen Ben Hamida,
Florian Bergmann,
Klaus Pierz,
Hans Werner Schumacher
Abstract:
GaMnAs-based magnetic tunnel junction (MTJ) devices are characterized by in-plane and perpendicular-toplane magnetotransport at low temperatures. Perpendicular-to-plane transport reveals the typical tunneling magnetotransport (TMR) signal. Interestingly, a similar TMR signature is observed in the in-plane transport signal. Here, low-ohmic shunting of the MTJ by the top contact results in significa…
▽ More
GaMnAs-based magnetic tunnel junction (MTJ) devices are characterized by in-plane and perpendicular-toplane magnetotransport at low temperatures. Perpendicular-to-plane transport reveals the typical tunneling magnetotransport (TMR) signal. Interestingly, a similar TMR signature is observed in the in-plane transport signal. Here, low-ohmic shunting of the MTJ by the top contact results in significant perpendicular-to-plane current paths. This effect allows the determination of TMR ratios of MTJs based on a simplified in-plane measurement. However, the same effect can lead to an inaccurate determination of resistance area products and spin torque critical current densities from perpendicular-to-plane magnetotransport experiments on MTJ pillar structures.
△ Less
Submitted 24 September, 2012;
originally announced September 2012.
-
The influence of individual lattice defects on the domain structure in magnetic antidot lattices
Authors:
X. K. Hu,
S. Sievers,
A. Müller,
H. W. Schumacher
Abstract:
We numerically and experimentally investigate the influence of single defects consisting of a missing antidot on the spin configurations in rectangular permalloy antidot lattices. The introduction of such lattice defects leads to the nucleation of complex domain structures after the decay of a saturating magnetic field. Micromagnetic simulations yield four typical domain configurations around the…
▽ More
We numerically and experimentally investigate the influence of single defects consisting of a missing antidot on the spin configurations in rectangular permalloy antidot lattices. The introduction of such lattice defects leads to the nucleation of complex domain structures after the decay of a saturating magnetic field. Micromagnetic simulations yield four typical domain configurations around the defect having distinct energy densities. The existence of the four spin configurations is confirmed by magnetic force microscopy on antidot lattices containing individual defects.
△ Less
Submitted 14 March, 2013; v1 submitted 5 April, 2012;
originally announced April 2012.