-
Nano-Patterned Pt-Based Metallic Glass Electrocatalysts with In-Situ Copper Oxide Foam for Enhanced Hydrogen Evolution
Authors:
Fei-Fan Cai,
Baran Sarac,
Adnan Akman,
Juan J. Londoño,
Selin Gümrükcü,
Lukas Schweiger,
Martin Hantusch,
Jan Schroers,
Andreas Blatter,
Annett Gebert,
Florian Spieckermann,
Jürgen Eckert
Abstract:
Hydrogen is a promising energy carrier for replacing fossil fuels, and hydrogen production via hydrogen evolution reaction (HER) is an environmentally friendly option if electrocatalysts with low overpotentials and long-term stability are used. In this work, the electrocatalytic performance of $\mathrm{Pt_{57.5}Cu_{14.7}Ni_{5.3}P_{22.5}}$ bulk metallic glass (BMG) with flat, micro-patterned, and n…
▽ More
Hydrogen is a promising energy carrier for replacing fossil fuels, and hydrogen production via hydrogen evolution reaction (HER) is an environmentally friendly option if electrocatalysts with low overpotentials and long-term stability are used. In this work, the electrocatalytic performance of $\mathrm{Pt_{57.5}Cu_{14.7}Ni_{5.3}P_{22.5}}$ bulk metallic glass (BMG) with flat, micro-patterned, and nano-patterned surfaces for HER in 0.5 M H2SO4 is studied. The nano-patterned Pt-BMG demonstrates outstanding long-term stability and self-improving behavior with a final overpotential of 150 mV and a Tafel slope of 42 $\mathrm{mV dec^{-1}}$ after 1000 linear sweep voltammetry (LSV) cycles, which is respectively 42% and 37% lower than in the first LSV cycle. X-ray photoelectron spectroscopy (XPS) and Auger electron spectroscopy (AES) indicate the formation of a layer of CuO/Cu2O foam deposited on top of the nano-patterned surface during the stability test of 1000 LSV cycles. A three-step process is proposed to explain the formation of CuxO foam via dynamic hydrogen bubble templating (DHBT) electrodeposition from Cu dissolution of the Pt-BMG without using copper salt. This work provides a method to create CuxO foams that could be used for various applications. Moreover, nano-patterned BMGs with DHBT deposition offer a feasible strategy to synthesize metal or metal-oxide foams.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Rejuvenation engineering in metallic glasses by complementary stress and structure modulation
Authors:
D. Şopu,
F. Spieckermann,
X. L. Bian,
S. Fellner,
J. Wright,
M. Cordill,
C. Gammer,
G. Wang,
M. Stoica,
J. Eckert
Abstract:
Residual stress engineering is very widely used in the design of new advanced lightweight materials. For metallic glasses the attention has been on structural changes and rejuvenation processes. High energy scanning X-ray diffraction strain mapping reveals large elastic fluctuations in metallic glasses after deformation under triaxial compression. Microindentation hardness mapping hints to a compe…
▽ More
Residual stress engineering is very widely used in the design of new advanced lightweight materials. For metallic glasses the attention has been on structural changes and rejuvenation processes. High energy scanning X-ray diffraction strain mapping reveals large elastic fluctuations in metallic glasses after deformation under triaxial compression. Microindentation hardness mapping hints to a competing hardening-softening mechanism after compression and further reveals the complementary effects of stress and structure modulation. Transmission electron microscopy proves that structure modulation under room temperature deformation relates to the shear band formation that closely correlates to the distribution of elastic heterogeneities. Molecular dynamics simulations provide an atomistic understanding of the complex shear band activity in notched metallic glasses and the related fluctuations in the strain/stress heterogeneity. Thus, future focus should be given to stress engineering and elastic heterogeneity that together with structure modulation may allow to design metallic glasses with enhanced ductility and strain hardening ability.
△ Less
Submitted 11 October, 2022; v1 submitted 16 September, 2022;
originally announced September 2022.
-
Magnetron Sputtered Non-Toxic and Precious Element-Free Ti-Zr-Ge Metallic Glass Nanofilms with Enhanced Biocorrosion Resistance
Authors:
Baran Sarac,
Matej Micusik,
Barbara Putz,
Stefan Wurster,
Elham Sharifikolouei,
Lixia Xi,
Maria Omastova,
Florian Spieckermann,
Christian Mitterer,
Jürgen Eckert
Abstract:
The chemical composition and structural state of advanced alloys are the decisive factors in optimum biomedical performance. This contribution presents unique Ti-Zr-Ge metallic glass thin-film compositions fabricated by magnetron sputter deposition targeted for nanocoatings for biofouling prevention. The amorphous nanofilms with nanoscale roughness exhibit a large relaxation and supercooled liquid…
▽ More
The chemical composition and structural state of advanced alloys are the decisive factors in optimum biomedical performance. This contribution presents unique Ti-Zr-Ge metallic glass thin-film compositions fabricated by magnetron sputter deposition targeted for nanocoatings for biofouling prevention. The amorphous nanofilms with nanoscale roughness exhibit a large relaxation and supercooled liquid regions as revealed by flash differential scanning calorimetry. Ti\textsubscript{68}Zr\textsubscript{8}Ge\textsubscript{24} shows the lowest corrosion (0.17 \textmu A cm\textsuperscript{\textminus2}) and passivation (1.22 \textmu A cm\textsuperscript{\textminus2}) current densities, with the lowest corrosion potential of \textminus0.648 V and long-range stability against pitting, corroborating its excellent performance in phosphate buffer solution at 37 {\textdegree}C. The oxide layer is comprised of TiO\textsubscript{2}, TiO\textsubscript{\emph{x}} and ZrO\textsubscript{\emph{x}}, as determined using X-ray photoelectron spectroscopy by short-term ion-etching of the surface layer. The two orders of magnitude increase in the oxide and interface resistance (from 14 to 1257 {\textOmega} cm\textsuperscript{2}) along with an order of magnitude decrease in the capacitance parameter of the oxide interface (from 1.402 x 10\textsuperscript{\textminus5} to 1.677 x 10\textsuperscript{\textminus6} S s\textsuperscript{n} cm\textsuperscript{\textminus2}) of the same composition is linked to the formation of carbonyl groups and reduction of the native oxide layer during linear sweep voltammetry.
△ Less
Submitted 1 August, 2022; v1 submitted 14 July, 2022;
originally announced July 2022.
-
Structure-dynamics relationships in cryogenically deformed bulk metallic glass
Authors:
Florian Spieckermann,
Daniel Şopu,
Viktor Soprunyuk,
Michael B. Kerber,
Jozef Bednarčík,
Alexander Schökel,
Amir Rezvan,
Sergey Ketov,
Baran Sarac,
Erhard Schafler,
Jürgen Eckert
Abstract:
The atomistic mechanisms occurring during the processes of aging and rejuvenation in glassy materials involve very small structural rearrangements that are extremely difficult to capture experimentally. Here we use in-situ X-ray diffraction to investigate the structural rearrangements during annealing from 77 K up to the crystallization temperature in Cu44Zr44Al8Hf2Co2 bulk metallic glass rejuvena…
▽ More
The atomistic mechanisms occurring during the processes of aging and rejuvenation in glassy materials involve very small structural rearrangements that are extremely difficult to capture experimentally. Here we use in-situ X-ray diffraction to investigate the structural rearrangements during annealing from 77 K up to the crystallization temperature in Cu44Zr44Al8Hf2Co2 bulk metallic glass rejuvenated by high pressure torsion performed at cryogenic temperatures and at room temperature. Using a measure of the configurational entropy calculated from the X-ray pair correlation function, the structural footprint of the deformation-induced rejuvenation in bulk metallic glass is revealed. With synchrotron radiation, temperature and time resolutions comparable to calorimetric experiments are possible. This opens hitherto unavailable experimental possibilities allowing to unambiguously correlate changes in atomic configuration and structure to calorimetrically observed signals and can attribute those to changes of the dynamic and vibrational relaxations (α-, β- and γ-transition) in glassy materials. The results suggest that the structural footprint of the β-transition is related to entropic relaxation with characteristics of a first-order transition. Dynamic mechanical analysis data shows that in the range of the β-transition, non-reversible structural rearrangements are preferentially activated. The low-temperature γ-transition is mostly triggering reversible deformations and shows a change of slope in the entropic footprint suggesting second-order characteristics.
△ Less
Submitted 11 January, 2022; v1 submitted 19 April, 2021;
originally announced April 2021.
