-
Effect of temperature and copper doping on the heterogeneous Fenton-like activity of Cu$_x$Fe$_{3-x}$O$_4$ nanoparticles
Authors:
Nahuel Nuñez,
Enio Lima Jr.,
Marcelo Vásquez Mansilla,
Gerardo F. Goya,
Álvaro Gallo-Cordova,
María del Puerto Morales,
Elin L. Winkler
Abstract:
Ferrite nanoparticles serve as potent heterogeneous Fenton-like catalysts, producing reactive oxygen species (ROS) for decomposing organic pollutants. We investigated the impact of temperature and copper content on the catalytic activity of nanoparticles with different oxidation states of iron. Via solvothermal synthesis, we fabricated copper-doped magnetite (Cu$_x$Fe$_{3-x}$O$_4$) with a Fe…
▽ More
Ferrite nanoparticles serve as potent heterogeneous Fenton-like catalysts, producing reactive oxygen species (ROS) for decomposing organic pollutants. We investigated the impact of temperature and copper content on the catalytic activity of nanoparticles with different oxidation states of iron. Via solvothermal synthesis, we fabricated copper-doped magnetite (Cu$_x$Fe$_{3-x}$O$_4$) with a Fe$^{2+}$/Fe ratio ~0.33 for the undoped system. Using a microwave-assisted method, we produced copper-doped oxidized ferrites, yielding a Fe$^{2+}$/Fe ratio of ~0.11 for the undoped nanoparticles. The ROS generated by the catalyst were identified and quantified by electron paramagnetic resonance, while optical spectroscopy allowed us to evaluate its effectiveness for the degradation of a model organic dye. At room temperature, the magnetite nanoparticles exhibited the most $\cdot$OH radical production and achieved almost 90% dye discoloration in 2 hours. This efficiency decreased with increasing Cu concentration, concurrently with a decrease in $\cdot$OH generation. Conversely, above room temperature, Cu-doped nanoparticles significantly enhance the dye degradation, reaching 100% discoloration at 90$^\circ$C. This enhancement is accompanied by a systematic increase in the kinetic constants, obtained from reaction equations, with Cu doping. This study highlights the superior stability and high-temperature catalytic advantages of copper ferrite holding promise for enhancing the performance of nanocatalysts for decomposing organic contaminants.
△ Less
Submitted 23 February, 2024;
originally announced February 2024.
-
Annealing effects on the magnetic and magnetotransport properties of iron oxide nanoparticles self-assemblies
Authors:
Fernando Fabris,
Enio Lima Jr,
Jorge Martín Nuñez,
Horacio E Troiani,
Myriam H Aguirre,
Victor Leborán,
Francisco Rivadulla,
Elin L Winkler
Abstract:
In magnetic tunnel junctions based on iron oxide nanoparticles the disorder and the oxidation state of the surface spin as well as the nanoparticles functionalization play a crucial role in the magnetotransport properties. In this work, we report a systematic study of the effects of vacuum annealing on the structural, magnetic and transport properties of self-assembled ~10 nm Fe3O4 nanoparticles.…
▽ More
In magnetic tunnel junctions based on iron oxide nanoparticles the disorder and the oxidation state of the surface spin as well as the nanoparticles functionalization play a crucial role in the magnetotransport properties. In this work, we report a systematic study of the effects of vacuum annealing on the structural, magnetic and transport properties of self-assembled ~10 nm Fe3O4 nanoparticles. The high temperature treatment (from 573 to 873 K) decomposes the organic coating into amorphous carbon, reducing the electrical resistivity of the assemblies by 4 orders of magnitude. At the same time, the 3Fe2+/(Fe3++Fe2+) ratio is reduced from 1.11 to 0.13 when the annealing temperature of the sample increases from 573 to 873 K, indicating an important surface oxidation. Although the 2 nm physical gap remains unchanged with the thermal treatment, a monotonous decrease of tunnel barrier width was obtained from the electron transport measurements when the annealing temperature increases, indicating an increment in the number of defects and hot-spots in the gap between the nanoparticles. This is reflected in the reduction of the spin dependent tunneling, which reduces the interparticle magnetoresistance. This work shows new insights about influence of the nanoparticle interfacial composition, as well their the spatial arrangement, on the tunnel transport of self-assemblies, and evidence the importance of optimizing the nanostructure fabrication for increasing the tunneling current without degrading the spin polarized current.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
Onion-like Fe3O4/MgO/CoFe2O4 magnetic nanoparticles: new ways to control magnetic coupling between soft/hard phases
Authors:
Jorge M. Nuñez,
Simon Hettler,
Enio Lima Jr.,
Gerardo. F. Goya,
Raul Arenal,
Roberto D. Zysler,
Myriam H. Aguirre,
Elin L. Winkler
Abstract:
The control of the magnetization inversion dynamics is one of the main challenges driving the design of new nanostructured magnetic materials for magnetoelectronic applications. Nanoparticles with onion-like architecture offer a unique opportunity to expand the possibilities allowing to combine different phases at the nanoscale and also modulate the coupling between magnetic phases by introducing…
▽ More
The control of the magnetization inversion dynamics is one of the main challenges driving the design of new nanostructured magnetic materials for magnetoelectronic applications. Nanoparticles with onion-like architecture offer a unique opportunity to expand the possibilities allowing to combine different phases at the nanoscale and also modulate the coupling between magnetic phases by introducing spacers in the same structure. Here we report the fabrication, by a three-step high temperature decomposition method, of Fe3O4/MgO/CoFe2O4 onio-like nanoparticles and their detailed structural analysis, elemental compositional maps and magnetic response. The core/shell/shell nanoparticles present epitaxial growth and cubic shape with overall size of (29+-6) nm. These nanoparticles are formed by cubic iron oxide core of (22+-4) nm covered by two shells, the inner of magnesium oxide and the outer of cobalt ferrite of ~1 and ~2.5 nm of thickness, respectively. The magnetization measurements show a single reversion magnetization curve and the enhancement of the coercivity field, from HC~608 Oe for the Fe3O4/MgO to HC~5890 Oe to the Fe3O4/MgO/CoFe2O4 nanoparticles at T=5 K, ascribed to the coupling between both ferrimagnetic phases with a coupling constant of =2 erg/cm2. The system also exhibits exchange bias effect, where the exchange bias field increases up to HEB~2850 Oe at 5 K accompanied with the broadening of the magnetization loop of HC~6650 Oe. This exchange bias effect originates from the freezing of the surface spins below the freezing temperature TF=32 K that pinned the magnetic moment of the cobalt ferrite shell.
△ Less
Submitted 19 June, 2023;
originally announced June 2023.
-
Magnetic hyperthermia experiments with magnetic nanoparticles in clarified butter oil and paraffin: a thermodynamic analysis
Authors:
Adriele A. de Almeida,
Emilio De Biasi,
Marcelo Vasquez Mansilla,
Daniela P. Valdés,
Horacio E. Troiani,
Guillermina Urretavizcaya,
Teobaldo E. Torres,
Luis M. Rodríguez,
Daniel E. Fregenal,
Guillermo C. Bernardi,
Elin L. Winkler,
Gerardo F. Goya,
Roberto D. Zysler,
Enio Lima Jr
Abstract:
In Specific Power Absorption (SPA) models for Magnetic Fluid Hyperthermia (MFH) experiments, the magnetic relaxation time of the nanoparticles (NPs) is known to be a fundamental descriptor of the heating mechanisms. The relaxation time is mainly determined by the interplay between the magnetic properties of the NPs and the rheological properties of NPs environment. Although the role of magnetism i…
▽ More
In Specific Power Absorption (SPA) models for Magnetic Fluid Hyperthermia (MFH) experiments, the magnetic relaxation time of the nanoparticles (NPs) is known to be a fundamental descriptor of the heating mechanisms. The relaxation time is mainly determined by the interplay between the magnetic properties of the NPs and the rheological properties of NPs environment. Although the role of magnetism in MFH has been extensively studied, the thermal properties of the NPs medium and their changes during of MFH experiments have been so far underrated. Here, we show that ZnxFe3-xO4 NPs dispersed through different with phase transition in the temperature range of the experiment: clarified butter oil (CBO) and paraffin. These systems show non-linear behavior of the heating rate within the temperature range of the MFH experiments. For CBO, a fast increase at $306 K$ associated to changes in the viscosity (\texteta(T)) and specific heat (c_p(T)) of the medium below and above its melting temperature. This increment in the heating rate takes place around $318 K$ for paraffin. Magnetic and morphological characterizations of NPs together with the observed agglomeration of the nanoparticles above $306 K$ indicate that the fast increase in MFH curves could not be associated to a change in the magnetic relaxation mechanism, with Néel relaxation being dominant. In fact, successive experiment runs performed up to temperatures below and above the CBO melting point resulted in different MFH curves due to agglomeration of NPs driven by magnetic field inhomogeneity during the experiments. Similar effects were observed for paraffin. Our results highlight the relevance of the NPs medium's thermodynamic properties for an accurate measurement of the heating efficiency for in vitro and in vivo environments, where the thermal properties are largely variable within the temperature window of MFH experiments.
△ Less
Submitted 25 February, 2021;
originally announced February 2021.
-
Tunnel Magnetoresistance in Self-Assemblies of Exchange Coupled Core/Shell Nanoparticles
Authors:
Fernando Fabris,
Enio Lima Jr.,
Cynthia Quinteros,
Lucas Nener,
Mara Granada,
Martín Sirena,
Roberto D. Zysler,
Horacio E. Troiani,
Víctor Leborán,
Francisco Rivadulla,
Elin L. Winkler
Abstract:
We report the precise control of tunneling magnetoresistance (TMR) in devices of self-assembled core/shell Fe$_3$O$_4$/Co$_{1-x}$Zn$_x$Fe$_2$O$_4$ nanoparticles ($0\leq x\leq 1$). Adjusting the magnetic anisotropy through the content of Co$^{2+}$ in the shell, provides an accurate tool to control the switching field between the bistable states of the TMR. In this way, different combinations of sof…
▽ More
We report the precise control of tunneling magnetoresistance (TMR) in devices of self-assembled core/shell Fe$_3$O$_4$/Co$_{1-x}$Zn$_x$Fe$_2$O$_4$ nanoparticles ($0\leq x\leq 1$). Adjusting the magnetic anisotropy through the content of Co$^{2+}$ in the shell, provides an accurate tool to control the switching field between the bistable states of the TMR. In this way, different combinations of soft/hard and hard/soft core/shell configurations can be envisaged for optimizing devices with the required magnetotransport response.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Temperature evolution of the effective magnetic anisotropy in the MnCr$_2$O$_4$ spinel
Authors:
Dina Tobia,
Julián Milano,
María Teresa Causa,
Elin L. Winkler
Abstract:
In this work we present a study of the low temperature magnetic phases of polycrystalline MnCr$_2$O$_4$ spinel through dc magnetization and ferromagnetic resonance spectroscopy (FMR). Through these experiments we determined the main characteristic temperatures: T$_C$ $\sim$41 K and T$_H$ $\sim$18 K corresponding, respectively, to the ferrimagnetic order and to the low temperature helicoidal transi…
▽ More
In this work we present a study of the low temperature magnetic phases of polycrystalline MnCr$_2$O$_4$ spinel through dc magnetization and ferromagnetic resonance spectroscopy (FMR). Through these experiments we determined the main characteristic temperatures: T$_C$ $\sim$41 K and T$_H$ $\sim$18 K corresponding, respectively, to the ferrimagnetic order and to the low temperature helicoidal transitions. The temperature evolution of the system is described by a phenomenological approach that considers the different terms that contribute to the free energy density. Below the Curie temperature the FMR spectra were modeled by a cubic magnetocrystalline anisotropy to the second order, with $K_1$ and $K_2$ anisotropy constants that define the easy magnetization axis along the <110> direction. At lower temperatures, the formation of a helicoidal phase was considered by including uniaxial anisotropy axis along the [1-10] propagation direction of the spiral arrange, with a $K_u$ anisotropy constant. The values obtained from the fittings at 5 K are $K_1$=-2.3x10$^4$ erg/cm$^3$, $K^2$=6.4x10$^4$ erg/cm$^3$ and $K_u$=7.5x10$^4$ erg/cm$^3$.
△ Less
Submitted 10 November, 2014;
originally announced November 2014.
-
Determination of Gd concentration profile in UO2-Gd2O3 fuel pellets
Authors:
D. Tobia,
E. L. Winkler,
J. Milano,
A. Butera,
R. Kempf,
L. Bianchi,
F. Kaufmann
Abstract:
A transversal mapping of the Gd concentration was measured in UO2-Gd2O3 nuclear fuel pellets by electron paramagnetic resonance spectroscopy (EPR). The quantification was made from the comparison with a Gd2O3 reference sample. The nominal concentration in the pellets is UO2: 7.5 % Gd2O3. A concentration gradient was found, which indicates that the Gd2O3 amount diminishes towards the edges of the p…
▽ More
A transversal mapping of the Gd concentration was measured in UO2-Gd2O3 nuclear fuel pellets by electron paramagnetic resonance spectroscopy (EPR). The quantification was made from the comparison with a Gd2O3 reference sample. The nominal concentration in the pellets is UO2: 7.5 % Gd2O3. A concentration gradient was found, which indicates that the Gd2O3 amount diminishes towards the edges of the pellets. The concentration varies from (9.3 +/- 0.5)% in the center to (5.8 +/- 0.3)% in one of the edges. The method was found to be particularly suitable for the precise mapping of the distribution of Gd3+ ions in the UO2 matrix.
△ Less
Submitted 28 February, 2014;
originally announced February 2014.
