Showing 1–50 of 101 results for author: Alexandropoulos, G C

The Interference Broadcast Channel with Reconfigurable Intelligent Surfaces: A Cooperative Sum-Rate Maximization Approach

Authors: Konstantinos D. Katsanos, Paolo Di Lorenzo, George C. Alexandropoulos

Abstract: This paper studies the interference broadcast channel comprising multiple multi-antenna Base Stations (BSs), each controlling a beyond diagonal Reconfigurable Intelligent Surface (RIS) and serving multiple single-antenna users. Wideband transmissions are considered with the objective to jointly design the BS linear precoding vectors and the phase configurations at the RISs in a distributed manner.… ▽ More This paper studies the interference broadcast channel comprising multiple multi-antenna Base Stations (BSs), each controlling a beyond diagonal Reconfigurable Intelligent Surface (RIS) and serving multiple single-antenna users. Wideband transmissions are considered with the objective to jointly design the BS linear precoding vectors and the phase configurations at the RISs in a distributed manner. We take into account the frequency selectivity behavior of each RIS's tunable meta-element, and focusing on the sum rate as the system's performance criterion, we present a distributed optimization approach that enables cooperation between the RIS control units and their respective BSs. According to the proposed scheme, each design variable can be efficiently obtained in an iterative parallel way with guaranteed convergence properties. Our simulation results demonstrate the validity of the presented distributed algorithm and showcase its superiority over a non-cooperative scheme as well as over the special case where the RISs have a conventional diagonal structure. △ Less

Submitted 5 September, 2024; originally announced September 2024.

Comments: 5 pages, 1 figure; to be presented in IEEE SPAWC 2024. arXiv admin note: text overlap with arXiv:2406.19334

Fast Network Recovery from Large-Scale Disasters: A Resilient and Self-Organizing RAN Framework

Authors: M. Yaser Yagan, Sefa Kayraklik, Samed Kesir, Gizem Sumen, Ibrahim Hokelek, Mehmet Basaran, George C. Alexandropoulos, Ertugrul Basar, Cicek Cavdar, Huseyin Arslan, Ali Gorcin

Abstract: Extreme natural phenomena are occurring more frequently everyday in the world, challenging, among others, the infrastructure of communication networks. For instance, the devastating earthquakes in Turkiye in early 2023 showcased that, although communications became an imminent priority, existing mobile communication systems fell short with the operational requirements of harsh disaster environment… ▽ More Extreme natural phenomena are occurring more frequently everyday in the world, challenging, among others, the infrastructure of communication networks. For instance, the devastating earthquakes in Turkiye in early 2023 showcased that, although communications became an imminent priority, existing mobile communication systems fell short with the operational requirements of harsh disaster environments. In this article, we present a novel framework for robust, resilient, adaptive, and open source sixth generation (6G) radio access networks (Open6GRAN) that can provide uninterrupted communication services in the face of natural disasters and other disruptions. Advanced 6G technologies, such as reconfigurable intelligent surfaces (RISs), cell-free multiple-input-multiple-output, and joint communications and sensing with increasingly heterogeneous deployment, consisting of terrestrial and non-terrestrial nodes, are robustly integrated. We advocate that a key enabler to develop service and management orchestration with fast recovery capabilities will rely on an artificial-intelligence-based radio access network (RAN) controller. To support the emergency use case spanning a larger area, the integration of aerial and space segments with the terrestrial network promises a rapid and reliable response in the case of any disaster. A proof-of-concept that rapidly reconfigures an RIS for performance enhancement under an emergency scenario is presented and discussed. △ Less

Submitted 16 August, 2024; originally announced August 2024.

Comments: Submitted to IEEE VTM

Near-Field Localization with Antenna Arrays in the Presence of Direction-Dependent Mutual Coupling

Authors: Zohreh Ebadi, Amir Masoud Molaei, George C. Alexandropoulos, Muhammad Ali Babar Abbasi, Simon Cotton, Anvar Tukmanov, Okan Yurduseven

Abstract: Localizing near-field sources considering practical arrays is a recent challenging topic for next generation wireless communication systems. Practical antenna array apertures with closely spaced elements exhibit direction-dependent mutual coupling (MC), which can significantly degrade the performance localization techniques. A conventional method for near-field localization in the presence of MC i… ▽ More Localizing near-field sources considering practical arrays is a recent challenging topic for next generation wireless communication systems. Practical antenna array apertures with closely spaced elements exhibit direction-dependent mutual coupling (MC), which can significantly degrade the performance localization techniques. A conventional method for near-field localization in the presence of MC is the three-dimensional (3D) multiple signal classification technique, which, however, suffers from extremely high computational complexity. Recently, two-dimensional (2D) search alternatives have been presented, exhibiting increased complexity still for direction-dependent MC scenarios. In this paper, we devise a low complexity one-dimensional (1D) iterative method based on an oblique projection operator (IMOP) that estimates direction-dependent MC and the locations of multiple near-field sources. The proposed method first estimates the initial direction of arrival (DOA) and MC using the approximate wavefront model, and then, estimates the initial range of one near-field source using the exact wavefront model. Afterwards, at each iteration, the oblique projection operator is used to isolate components associated with one source from those of other sources. The DOA and range of this one source are estimated using the exact wavefront model and 1D searches. Finally, the direction-dependent MC is estimated for each pair of the estimated DOA and range. The performance of the proposed near-field localization approach is comprehensively investigated and verified using both a full-wave electromagnetic solver and synthetic simulations. It is showcased that our IMOP scheme performs almost similarly to a state-of-the-art approach but with a 42 times less computational complexity. △ Less

Submitted 13 August, 2024; originally announced August 2024.

Comments: 13 pages, 11 figures, submitted to an IEEE Transactions

Multi-User MISO with Stacked Intelligent Metasurfaces: A DRL-Based Sum-Rate Optimization Approach

Authors: Hao Liu, Jiancheng An, George C. Alexandropoulos, Derrick Wing Kwan Ng, Chau Yuen, Lu Gan

Abstract: Stacked intelligent metasurfaces (SIMs) represent a novel signal processing paradigm that enables over-the-air processing of electromagnetic waves at the speed of light. Their multi-layer architecture exhibits customizable computational capabilities compared to conventional single-layer reconfigurable intelligent surfaces and metasurface lenses. In this paper, we deploy SIM to improve the performa… ▽ More Stacked intelligent metasurfaces (SIMs) represent a novel signal processing paradigm that enables over-the-air processing of electromagnetic waves at the speed of light. Their multi-layer architecture exhibits customizable computational capabilities compared to conventional single-layer reconfigurable intelligent surfaces and metasurface lenses. In this paper, we deploy SIM to improve the performance of multi-user multiple-input single-output (MISO) wireless systems through a low complexity manner with reduced numbers of transmit radio frequency chains. In particular, an optimization formulation for the joint design of the SIM phase shifts and the transmit power allocation is presented, which is efficiently tackled via a customized deep reinforcement learning (DRL) approach that systematically explores pre-designed states of the SIM-parametrized smart wireless environment. The presented performance evaluation results demonstrate the proposed method's capability to effectively learn from the wireless environment, while consistently outperforming conventional precoding schemes under low transmit power conditions. Furthermore, the implementation of hyperparameter tuning and whitening process significantly enhance the robustness of the proposed DRL framework. △ Less

Submitted 8 August, 2024; originally announced August 2024.

Comments: 34 pages, 11 figures, 2 tables. arXiv admin note: text overlap with arXiv:2402.09006

Simultaneous Near-Field THz Communications and Sensing with Full Duplex Metasurface Transceivers

Authors: Ioannis Gavras, George C. Alexandropoulos

Abstract: In this paper, a Full Duplex (FD) eXtremely Large (XL) Multiple-Input Multiple-Output (MIMO) node equipped with reconfigurable metasurface antennas at its transmission and reception sides is considered, which is optimized for simultaneous multi-user communications and sensing in the near-field regime at THz frequencies. We first present a novel Position Error Bound (PEB) analysis for the spatial p… ▽ More In this paper, a Full Duplex (FD) eXtremely Large (XL) Multiple-Input Multiple-Output (MIMO) node equipped with reconfigurable metasurface antennas at its transmission and reception sides is considered, which is optimized for simultaneous multi-user communications and sensing in the near-field regime at THz frequencies. We first present a novel Position Error Bound (PEB) analysis for the spatial parameters of multiple targets in the vicinity of the FD node, via the received backscattered data signals, and devise an optimization framework for its metasurface-based precoder and combiner. Then, we formulate and solve an optimization problem aiming at the downlink sum-rate maximization, while simultaneously ensuring a minimum PEB requirement for targets' localization. Our simulation results for a sub-THz system setup validate the joint near-field communications and sensing capability of the proposed FD XL MIMO scheme with metasurfaces antennas, showcasing the interplay of its various design parameters. △ Less

Submitted 25 July, 2024; originally announced July 2024.

Comments: 5 pages, 2 figures, to be presented in SPAWC 2024

Metasurface Energy Harvesters: State-of-the-Art Designs and Their Potential for Energy Sustainable Reconfigurable Intelligent Surfaces

Authors: Alireza Ghaneizadeh, Panagiotis Gavriilidis, Mojtaba Joodaki, George C. Alexandropoulos

Abstract: Metasurface Energy Harvesters (MEHs) have emerged as a prominent enabler of highly efficient Radio Frequency (RF) energy harvesters. This survey delves into the fundamentals of the MEH technology, providing a comprehensive overview of their working principle, unit cell designs and prototypes over various frequency bands, as well as state-of-the art modes of operation. Inspired by the recent academ… ▽ More Metasurface Energy Harvesters (MEHs) have emerged as a prominent enabler of highly efficient Radio Frequency (RF) energy harvesters. This survey delves into the fundamentals of the MEH technology, providing a comprehensive overview of their working principle, unit cell designs and prototypes over various frequency bands, as well as state-of-the art modes of operation. Inspired by the recent academic and industrial interest on Reconfigurable Intelligent Surfaces (RISs)for the upcoming sixth-Generation (6G) of wireless networks, we study the interplay between this technology and MEHs aiming for energy sustainable RISs power by metasurface-based RF energy harvesting. We present a novel hybrid unit cell design capable of simultaneous energy harvesting and 1-bit tunable reflection whose dual-functional response is validated via full-wave simulations. Then, we conduct a comparative collection of real-world measurements for ambient RF power levels and power consumption budgets of reflective RISs to unveil the potential for a self-sustainable RIS via ambient RF energy harvesting. The paper is concluded with an elaborative discussion on open design challenges and future research directions for MEHs and energy sustainable hybrid RISs. △ Less

Submitted 19 July, 2024; originally announced July 2024.

Asymptotically Optimal Closed-Form Phase Configuration of $1$-bit RISs via Sign Alignment

Authors: Kyriakos Stylianopoulos, Panagiotis Gavriilidis, George C. Alexandropoulos

Abstract: While Reconfigurable Intelligent Surfaces (RISs) constitute one of the most prominent enablers for the upcoming sixth Generation (6G) of wireless networks, the design of efficient RIS phase profiles remains a notorious challenge when large numbers of phase-quantized unit cells are involved, typically of a single bit, as implemented by a vast majority of existing metasurface prototypes. In this pap… ▽ More While Reconfigurable Intelligent Surfaces (RISs) constitute one of the most prominent enablers for the upcoming sixth Generation (6G) of wireless networks, the design of efficient RIS phase profiles remains a notorious challenge when large numbers of phase-quantized unit cells are involved, typically of a single bit, as implemented by a vast majority of existing metasurface prototypes. In this paper, we focus on the RIS phase configuration problem for the exemplary case of the Signal-to-Noise Ratio (SNR) maximization for an RIS-enabled single-input single-output system where the metasurface tunable elements admit a phase difference of $πぱい$ radians. We present a novel closed-form configuration which serves as a lower bound guaranteeing at least half the SNR of the ideal continuous (upper bound) SNR gain, and whose mean performance is shown to be asymptotically optimal. The proposed sign alignment configuration can be further used as initialization to standard discrete optimization algorithms. A discussion on the reduced complexity hardware benefits via the presented configuration is also included. Our numerical results demonstrate the efficacy of the proposed RIS sign alignment scheme over iterative approaches as well as the commonplace continuous phase quantization treatment. △ Less

Submitted 18 July, 2024; originally announced July 2024.

Comments: 5 pages, 2 figures, 1 table, to be presented at IEEE SPAWC 2024

Reconfigurable Intelligent Computational Surfaces for MEC-Assisted Autonomous Driving Networks: Design Optimization and Analysis

Authors: Xueyao Zhang, Bo Yang, Zhiwen Yu, Xuelin Cao, George C. Alexandropoulos, Yan Zhang, Merouane Debbah, Chau Yuen

Abstract: This paper investigates autonomous driving safety improvement via task offloading from cellular vehicles (CVs) to a multi-access edge computing (MEC) server using vehicle-to-infrastructure (V2I) links. Considering that the latter links can be reused by vehicle-to-vehicle (V2V) communications to improve spectrum utilization, the receiver of the V2I link may suffer from severe interference that can… ▽ More This paper investigates autonomous driving safety improvement via task offloading from cellular vehicles (CVs) to a multi-access edge computing (MEC) server using vehicle-to-infrastructure (V2I) links. Considering that the latter links can be reused by vehicle-to-vehicle (V2V) communications to improve spectrum utilization, the receiver of the V2I link may suffer from severe interference that can cause outages during the task offloading. To tackle this issue, we propose the deployment of a reconfigurable intelligent computational surface (RICS) whose computationally capable metamaterials are leveraged to jointly enable V2I reflective links as well as to implement interference cancellation at the V2V links. We devise a joint optimization formulation for the task offloading ratio between the CVs and the MEC server, the spectrum sharing strategy between V2V and V2I communications, as well as the RICS reflection and refraction matrices to maximize an autonomous driving safety task. Due to the non-convexity of the problem and the coupling among its free variables, we transform it into a more tractable equivalent form, which is then decomposed into three sub-problems solved via an alternate approximation method. Our simulation results showcase that the proposed RICS-assisted offloading framework significantly improves the safety of the considered autonomous driving network, yielding a nearly 34\% improvement in the safety coefficient of the CVs. In addition, it is demonstrated that the V2V data rate can be improved by around 60\% indicating that the RICS-induced adjustment of the signals can effectively mitigate interference at the V2V link. △ Less

Submitted 30 June, 2024; originally announced July 2024.

Multi-RIS-Empowered Multiple Access: A Distributed Sum-Rate Maximization Approach

Authors: Konstantinos D. Katsanos, Paolo Di Lorenzo, George C. Alexandropoulos

Abstract: The plethora of wirelessly connected devices, whose deployment density is expected to largely increase in the upcoming sixth Generation (6G) of wireless networks, will naturally necessitate substantial advances in multiple access schemes. Reconfigurable Intelligent Surfaces (RISs) constitute a candidate 6G technology capable to offer dynamic over-the-air signal propagation programmability, which c… ▽ More The plethora of wirelessly connected devices, whose deployment density is expected to largely increase in the upcoming sixth Generation (6G) of wireless networks, will naturally necessitate substantial advances in multiple access schemes. Reconfigurable Intelligent Surfaces (RISs) constitute a candidate 6G technology capable to offer dynamic over-the-air signal propagation programmability, which can be optimized for efficient non-orthogonal access of a multitude of devices. In this paper, we study the downlink of a wideband communication system comprising multiple multi-antenna Base Stations (BSs), each wishing to serve an associated single-antenna user via the assistance of a Beyond Diagonal (BD) and frequency-selective RIS. Under the assumption that each BS performs Orthogonal Frequency Division Multiplexing (OFDM) transmissions and exclusively controls a distinct RIS, we focus on the sum-rate maximization problem and present a distributed joint design of the linear precoders at the BSs as well as the tunable capacitances and the switch selection matrices at the multiple BD RISs. The formulated non-convex design optimization problem is solved via successive concave approximation necessitating minimal cooperation among the BSs. Our extensive simulation results showcase the performance superiority of the proposed cooperative scheme over non-cooperation benchmarks, indicating the performance gains with BD RISs via the presented optimized frequency selective operation for various scenarios. △ Less

Submitted 27 June, 2024; originally announced June 2024.

Comments: Submitted to an IEEE Journal

Sustainable Wireless Networks via Reconfigurable Intelligent Surfaces (RISs): Overview of the ETSI ISG RIS

Authors: Ruiqi Liu, Shuang Zheng, Qingqing Wu, Yifan Jiang, Nan Zhang, Yuanwei Liu, Marco Di Renzo, and George C. Alexandropoulos

Abstract: Reconfigurable Intelligent Surfaces (RISs) are a novel form of ultra-low power devices that are capable to increase the communication data rates as well as the cell coverage in a cost- and energy-efficient way. This is attributed to their programmable operation that enables them to dynamically manipulate the wireless propagation environment, a feature that has lately inspired numerous research inv… ▽ More Reconfigurable Intelligent Surfaces (RISs) are a novel form of ultra-low power devices that are capable to increase the communication data rates as well as the cell coverage in a cost- and energy-efficient way. This is attributed to their programmable operation that enables them to dynamically manipulate the wireless propagation environment, a feature that has lately inspired numerous research investigations and applications. To pave the way to the formal standardization of RISs, the European Telecommunications Standards Institute (ETSI) launched the Industry Specification Group (ISG) on the RIS technology in September 2021. This article provides a comprehensive overview of the status of the work conducted by the ETSI ISG RIS, covering typical deployment scenarios of reconfigurable metasurfaces, use cases and operating applications, requirements, emerging hardware architectures and operating modes, as well as the latest insights regarding future directions of RISs and the resulting smart wireless environments. △ Less

Submitted 9 June, 2024; originally announced June 2024.

Comments: 7 pages, 5 figures, submitted to an IEEE Magazine

Near-Field Channel Modeling for Holographic MIMO Communications

Authors: Tierui Gong, Li Wei, Chongwen Huang, George C. Alexandropoulos, Mérouane Debbah, Chau Yuen

Abstract: Empowered by the latest progress on innovative metamaterials/metasurfaces and advanced antenna technologies, holographic multiple-input multiple-output (H-MIMO) emerges as a promising technology to fulfill the extreme goals of the sixth-generation (6G) wireless networks. The antenna arrays utilized in H-MIMO comprise massive (possibly to extreme extent) numbers of antenna elements, densely spaced… ▽ More Empowered by the latest progress on innovative metamaterials/metasurfaces and advanced antenna technologies, holographic multiple-input multiple-output (H-MIMO) emerges as a promising technology to fulfill the extreme goals of the sixth-generation (6G) wireless networks. The antenna arrays utilized in H-MIMO comprise massive (possibly to extreme extent) numbers of antenna elements, densely spaced less than half-a-wavelength and integrated into a compact space, realizing an almost continuous aperture. Thanks to the expected low cost, size, weight, and power consumption, such apertures are expected to be largely fabricated for near-field communications. In addition, the physical features of H-MIMO enable manipulations directly on the electromagnetic (EM) wave domain and spatial multiplexing. To fully leverage this potential, near-field H-MIMO channel modeling, especially from the EM perspective, is of paramount significance. In this article, we overview near-field H-MIMO channel models elaborating on the various modeling categories and respective features, as well as their challenges and evaluation criteria. We also present EM-domain channel models that address the inherit computational and measurement complexities. Finally, the article is concluded with a set of future research directions on the topic. △ Less

Submitted 16 March, 2024; v1 submitted 14 March, 2024; originally announced March 2024.

Comments: double column, 9 pages, 3 figures, 2 tables, accepted by IEEE Wireless Communications Magazine

Distributed Intelligent Integrated Sensing and Communications: The 6G-DISAC Approach

Authors: Emilio Calvanese Strinati, George C. Alexandropoulos, Madhusudan Giyyarpuram, Philippe Sehier, Sami Mekki, Vincenzo Sciancalepore, Maximilian Stark, Mohamed Sana, Benoit Denis, Maurizio Crozzoli, Navid Amani, Placido Mursia, Raffaele D Errico, Mauro Boldi, Francesca Costanzo, Francois Rivet, Henk Wymeerschx

Abstract: This paper introduces the concept of Distributed Intelligent integrated Sensing and Communications (DISAC), which expands the capabilities of Integrated Sensing and Communications (ISAC) towards distributed architectures. Additionally, the DISAC framework integrates novel waveform design with new semantic and goal-oriented communication paradigms, enabling ISAC technologies to transition from trad… ▽ More This paper introduces the concept of Distributed Intelligent integrated Sensing and Communications (DISAC), which expands the capabilities of Integrated Sensing and Communications (ISAC) towards distributed architectures. Additionally, the DISAC framework integrates novel waveform design with new semantic and goal-oriented communication paradigms, enabling ISAC technologies to transition from traditional data fusion to the semantic composition of diverse sensed and shared information. This progress facilitates large-scale, energy-efficient support for high-precision spatial-temporal processing, optimizing ISAC resource utilization, and enabling effective multi-modal sensing performance. Addressing key challenges such as efficient data management and connect-compute resource utilization, 6G- DISAC stands to revolutionize applications in diverse sectors including transportation, healthcare, and industrial automation. Our study encapsulates the project vision, methodologies, and potential impact, marking a significant stride towards a more connected and intelligent world. △ Less

Submitted 28 February, 2024; originally announced February 2024.

Comments: Submitted for conference publication

Towards Distributed and Intelligent Integrated Sensing and Communications for 6G Networks

Authors: Emilio Calvanese Strinati, George C. Alexandropoulos, Navid Amani, Maurizio Crozzoli, Giyyarpuram Madhusudan, Sami Mekki, Francois Rivet, Vincenzo Sciancalepore, Philippe Sehier, Maximilian Stark, Henk Wymeersch

Abstract: This paper introduces the distributed and intelligent integrated sensing and communications (DISAC) concept, a transformative approach for 6G wireless networks that extends the emerging concept of integrated sensing and communications (ISAC). DISAC addresses the limitations of the existing ISAC models and, to overcome them, it introduces two novel foundational functionalities for both sensing and… ▽ More This paper introduces the distributed and intelligent integrated sensing and communications (DISAC) concept, a transformative approach for 6G wireless networks that extends the emerging concept of integrated sensing and communications (ISAC). DISAC addresses the limitations of the existing ISAC models and, to overcome them, it introduces two novel foundational functionalities for both sensing and communications: a distributed architecture and a semantic and goal-oriented framework. The distributed architecture enables large-scale and energy-efficient tracking of connected users and objects, leveraging the fusion of heterogeneous sensors. The semantic and goal-oriented intelligent and parsimonious framework, enables the transition from classical data fusion to the composition of semantically selected information, offering new paradigms for the optimization of resource utilization and exceptional multi-modal sensing performance across various use cases. This paper details DISAC's principles, architecture, and potential applications. △ Less

Submitted 18 February, 2024; originally announced February 2024.

Comments: Under review for possible publication in an IEEE Magazine

DRL-Based Orchestration of Multi-User MISO Systems with Stacked Intelligent Metasurfaces

Authors: Hao Liu, Jiancheng An, Derrick Wing Kwan Ng, George C. Alexandropoulos, Lu Gan

Abstract: Stacked intelligent metasurfaces (SIM) represents an advanced signal processing paradigm that enables over-the-air processing of electromagnetic waves at the speed of light. Its multi-layer structure exhibits customizable increased computational capability compared to conventional single-layer reconfigurable intelligent surfaces and metasurface lenses. In this paper, we deploy SIM to improve the p… ▽ More Stacked intelligent metasurfaces (SIM) represents an advanced signal processing paradigm that enables over-the-air processing of electromagnetic waves at the speed of light. Its multi-layer structure exhibits customizable increased computational capability compared to conventional single-layer reconfigurable intelligent surfaces and metasurface lenses. In this paper, we deploy SIM to improve the performance of multi-user multiple-input single-output (MISO) wireless systems with low complexity transmit radio frequency (RF) chains. In particular, an optimization formulation for the joint design of the SIM phase shifts and the transmit power allocation is presented, which is efficiently solved via a customized deep reinforcement learning (DRL) approach that continuously observes pre-designed states of the SIM-parametrized smart wireless environment. The presented performance evaluation results showcase the proposed method's capability to effectively learn from the wireless environment while outperforming conventional precoding schemes under low transmit power conditions. Finally, a whitening process is presented to further augment the robustness of the proposed scheme. △ Less

Submitted 14 February, 2024; originally announced February 2024.

Comments: accepted by IEEE ICC 2024

$1$-Bit SubTHz RIS with Planar Tightly Coupled Dipoles: Beam Shaping and Prototypes

Authors: Xianjun Ma, Yonggang Zhou, Qi Luo, Yihan Ma, Kyriakos Stylianopoulos, George C. Alexandropoulos

Abstract: In this paper, a proof-of-concept study of a $1$-bit wideband reconfigurable intelligent surface (RIS) comprising planar tightly coupled dipoles (PTCD) is presented. The developed RIS operates at subTHz frequencies and a $3$-dB gain bandwidth of $27.4\%$ with the center frequency at $102$ GHz is shown to be obtainable via full-wave electromagnetic simulations. The binary phase shift offered by eac… ▽ More In this paper, a proof-of-concept study of a $1$-bit wideband reconfigurable intelligent surface (RIS) comprising planar tightly coupled dipoles (PTCD) is presented. The developed RIS operates at subTHz frequencies and a $3$-dB gain bandwidth of $27.4\%$ with the center frequency at $102$ GHz is shown to be obtainable via full-wave electromagnetic simulations. The binary phase shift offered by each RIS unit element is enabled by changing the polarization of the reflected wave by $180^\circ$. The proposed PTCD-based RIS has a planar configuration with one dielectric layer bonded to a ground plane, and hence, it can be fabricated by using cost-effective printed circuit board (PCB) technology. We analytically calculate the response of the entire designed RIS and showcase that a good agreement between that result and equivalent full-wave simulations is obtained. To efficiently compute the $1$-bit RIS response for different pointing directions, thus, designing a directive beam codebook, we devise a fast approximate beamforming optimization approach, which is compared with time-consuming full-wave simulations. Finally, to prove our concept, we present several passive prototypes with frozen beams for the proposed $1$-bit wideband RIS. △ Less

Submitted 13 February, 2024; originally announced February 2024.

Comments: 5 pages, 11 figures, 18th European Conference on Antennas and Propagation (EuCAP) - to be presented

RIS-Augmented Millimeter-Wave MIMO Systems for Passive Drone Detection

Authors: Jiguang He, Aymen Fakhreddine, George C. Alexandropoulos

Abstract: In the past decade, the number of amateur drones is increasing, and this trend is expected to continue in the future. The security issues brought by abuse and misconduct of drones become more and more severe and may incur a negative impact to the society. In this paper, we leverage existing cellular multiple-input multiple-output (MIMO) base station (BS) infrastructure, operating at millimeter wav… ▽ More In the past decade, the number of amateur drones is increasing, and this trend is expected to continue in the future. The security issues brought by abuse and misconduct of drones become more and more severe and may incur a negative impact to the society. In this paper, we leverage existing cellular multiple-input multiple-output (MIMO) base station (BS) infrastructure, operating at millimeter wave (mmWave) frequency bands, for drone detection in a device-free manner with the aid of one reconfigurable intelligent surface (RIS), deployed in the proximity of the BS. We theoretically examine the feasibility of drone detection with the aid of the generalized likelihood ratio test (GLRT) and validate via simulations that, the optimized deployment of an RIS can bring added benefits compared to RIS-free systems. In addition, the effect of RIS training beams, training overhead, and radar cross section, is investigated in order to offer theoretical design guidance for the proposed cellular RIS-based passive drone detection system. △ Less

Submitted 11 February, 2024; originally announced February 2024.

Comments: 6 pages, 6 figures, submitted to IEEE PIMRC 2024

Multi-Agent Reinforcement Learning for Offloading Cellular Communications with Cooperating UAVs

Authors: Abhishek Mondal, Deepak Mishra, Ganesh Prasad, George C. Alexandropoulos, Azzam Alnahari, Riku Jantti

Abstract: Effective solutions for intelligent data collection in terrestrial cellular networks are crucial, especially in the context of Internet of Things applications. The limited spectrum and coverage area of terrestrial base stations pose challenges in meeting the escalating data rate demands of network users. Unmanned aerial vehicles, known for their high agility, mobility, and flexibility, present an… ▽ More Effective solutions for intelligent data collection in terrestrial cellular networks are crucial, especially in the context of Internet of Things applications. The limited spectrum and coverage area of terrestrial base stations pose challenges in meeting the escalating data rate demands of network users. Unmanned aerial vehicles, known for their high agility, mobility, and flexibility, present an alternative means to offload data traffic from terrestrial BSs, serving as additional access points. This paper introduces a novel approach to efficiently maximize the utilization of multiple UAVs for data traffic offloading from terrestrial BSs. Specifically, the focus is on maximizing user association with UAVs by jointly optimizing UAV trajectories and users association indicators under quality of service constraints. Since, the formulated UAVs control problem is nonconvex and combinatorial, this study leverages the multi agent reinforcement learning framework. In this framework, each UAV acts as an independent agent, aiming to maintain inter UAV cooperative behavior. The proposed approach utilizes the finite state Markov decision process to account for UAVs velocity constraints and the relationship between their trajectories and state space. A low complexity distributed state action reward state action algorithm is presented to determine UAVs optimal sequential decision making policies over training episodes. The extensive simulation results validate the proposed analysis and offer valuable insights into the optimal UAV trajectories. The derived trajectories demonstrate superior average UAV association performance compared to benchmark techniques such as Q learning and particle swarm optimization. △ Less

Submitted 31 May, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Comments: Significant modification required to get novel results

Reconfigurable Intelligent Computational Surfaces for MEC-Assisted Autonomous Driving Networks

Authors: Bo Yang, Xueyao Zhang, Zhiwen Yu, Xuelin Cao, Chongwen Huang, George C. Alexandropoulos, Yan Zhang, Merouane Debbah, Chau Yuen

Abstract: In this paper, we focus on improving autonomous driving safety via task offloading from cellular vehicles (CVs), using vehicle-to-infrastructure (V2I) links, to an multi-access edge computing (MEC) server. Considering that the frequencies used for V2I links can be reused for vehicle-to-vehicle (V2V) communications to improve spectrum utilization, the receiver of each V2I link may suffer from sever… ▽ More In this paper, we focus on improving autonomous driving safety via task offloading from cellular vehicles (CVs), using vehicle-to-infrastructure (V2I) links, to an multi-access edge computing (MEC) server. Considering that the frequencies used for V2I links can be reused for vehicle-to-vehicle (V2V) communications to improve spectrum utilization, the receiver of each V2I link may suffer from severe interference, causing outages in the task offloading process. To tackle this issue, we propose the deployment of a reconfigurable intelligent computational surface (RICS) to enable, not only V2I reflective links, but also interference cancellation at the V2V links exploiting the computational capability of its metamaterials. We devise a joint optimization formulation for the task offloading ratio between the CVs and the MEC server, the spectrum sharing strategy between V2V and V2I communications, as well as the RICS reflection and refraction matrices, with the objective to maximize a safety-based autonomous driving task. Due to the non-convexity of the problem and the coupling among its free variables, we transform it into a more tractable equivalent form, which is then decomposed into three sub-problems and solved via an alternate approximation method. Our simulation results demonstrate the effectiveness of the proposed RICS optimization in improving the safety in autonomous driving networks. △ Less

Submitted 1 February, 2024; originally announced February 2024.

Secure ISAC MIMO Systems: Exploiting Interference With Bayesian Cramér-Rao Bound Optimization

Authors: Nanchi Su, Fan Liu, Christos Masouros, George C. Alexandropoulos, Yifeng Xiong, Qinyu Zhang

Abstract: In this paper, we present a signaling design for secure integrated sensing and communication (ISAC) systems comprising a dual-functional multi-input multi-output (MIMO) base station (BS) that simultaneously communicates with multiple users while detecting targets present in their vicinity, which are regarded as potential eavesdroppers. In particular, assuming that the distribution of each paramete… ▽ More In this paper, we present a signaling design for secure integrated sensing and communication (ISAC) systems comprising a dual-functional multi-input multi-output (MIMO) base station (BS) that simultaneously communicates with multiple users while detecting targets present in their vicinity, which are regarded as potential eavesdroppers. In particular, assuming that the distribution of each parameter to be estimated is known \textit{a priori}, we focus on optimizing the targets' sensing performance. To this end, we derive and minimize the Bayesian Cramér-Rao bound (BCRB), while ensuring certain communication quality of service (QoS) by exploiting constructive interference (CI). The latter scheme enforces that the received signals at the eavesdropping targets fall into the destructive region of the signal constellation, to deteriorate their decoding probability, thus enhancing the ISAC's system physical-layer security (PLS) capability. To tackle the nonconvexity of the formulated problem, a tailored successive convex approximation method is proposed for its efficient solution. Our extensive numerical results verify the effectiveness of the proposed secure ISAC design showing that the proposed algorithm outperforms block-level precoding techniques. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Comments: 6 pages, 4 figures, submitted for journal publication

Far- versus Near-Field RIS Modeling and Beam Design

Authors: Mohamadreza Delbari, George C. Alexandropoulos, Robert Schober, Vahid Jamali

Abstract: In this chapter, we investigate the mathematical foundation of the modeling and design of reconfigurable intelligent surfaces (RIS) in both the far- and near-field regimes. More specifically, we first present RIS-assisted wireless channel models for the far- and near-field regimes, discussing relevant phenomena, such as line-of-sight (LOS) and non-LOS links, rich and poor scattering, channel corre… ▽ More In this chapter, we investigate the mathematical foundation of the modeling and design of reconfigurable intelligent surfaces (RIS) in both the far- and near-field regimes. More specifically, we first present RIS-assisted wireless channel models for the far- and near-field regimes, discussing relevant phenomena, such as line-of-sight (LOS) and non-LOS links, rich and poor scattering, channel correlation, and array manifold. Subsequently, we introduce two general approaches for the RIS reflective beam design, namely optimization-based and analytical, which offer different degrees of design flexibility and computational complexity. Furthermore, we provide a comprehensive set of simulation results for the performance evaluation of the studied RIS beam designs and the investigation of the impact of the system parameters. △ Less

Submitted 30 January, 2024; v1 submitted 16 January, 2024; originally announced January 2024.

Metasurface-Based Receivers with $1$-bit ADCs for Multi-User Uplink Communications

Authors: Panagiotis Gavriilidis, Italo Atzeni, George C. Alexandropoulos

Abstract: The massive Multiple-Input Multiple-Output (mMIMO) concept has been recently moving forward to extreme scales to address the envisioned requirements of next generation networks. However, the extension of conventional architectures will result in significant cost and power consumption. To this end, metasurface-based transceivers, consisting of microstrips of metamaterials, have recently emerged as… ▽ More The massive Multiple-Input Multiple-Output (mMIMO) concept has been recently moving forward to extreme scales to address the envisioned requirements of next generation networks. However, the extension of conventional architectures will result in significant cost and power consumption. To this end, metasurface-based transceivers, consisting of microstrips of metamaterials, have recently emerged as an efficient enabler of extreme mMIMO systems. In this paper, we consider metasurface-based receivers with a $1$-bit Analog-to-Digital Converter (ADC) per microstrip and develop an analytical framework for the optimization of the analog and digital combining matrices. Our numerical results, including comparisons with fully digital, infinite-resolution MIMO, provide useful insights into the role of various system parameters. △ Less

Submitted 15 January, 2024; originally announced January 2024.

Comments: 5 pages, 3 figures, to be presented in IEEE ICASSP 2024

Reconfigurable Intelligent Surfaces for 6G: Emerging Hardware Architectures, Applications, and Open Challenges

Authors: Ertugrul Basar, George C. Alexandropoulos, Yuanwei Liu, Qingqing Wu, Shi Jin, Chau Yuen, Octavia A. Dobre, Robert Schober

Abstract: Reconfigurable intelligent surfaces (RISs) are rapidly gaining prominence in the realm of fifth generation (5G)-Advanced, and predominantly, sixth generation (6G) mobile networks, offering a revolutionary approach to optimizing wireless communications. This article delves into the intricate world of the RIS technology, exploring its diverse hardware architectures and the resulting versatile operat… ▽ More Reconfigurable intelligent surfaces (RISs) are rapidly gaining prominence in the realm of fifth generation (5G)-Advanced, and predominantly, sixth generation (6G) mobile networks, offering a revolutionary approach to optimizing wireless communications. This article delves into the intricate world of the RIS technology, exploring its diverse hardware architectures and the resulting versatile operating modes. These include RISs with signal reception and processing units, sensors, amplification units, transmissive capability, multiple stacked components, and dynamic metasurface antennas. Furthermore, we shed light on emerging RIS applications, such as index and reflection modulation, non-coherent modulation, next generation multiple access, integrated sensing and communications (ISAC), energy harvesting, as well as aerial and vehicular networks. These exciting applications are set to transform the way we will wirelessly connect in the upcoming era of 6G. Finally, we review recent experimental RIS setups and present various open problems of the overviewed RIS hardware architectures and their applications. From enhancing network coverage to enabling new communication paradigms, RIS-empowered connectivity is poised to play a pivotal role in shaping the future of wireless networking. This article unveils the underlying principles and potential impacts of RISs, focusing on cutting-edge developments of this physical-layer smart connectivity technology. △ Less

Submitted 14 June, 2024; v1 submitted 28 December, 2023; originally announced December 2023.

Comments: 18 pages, 15 figures, 54 references, and an extended archival version of an invited and accepted article from IEEE Vehicular Technology Magazine

Journal ref: IEEE Vehicular Technology Magazine, 2024

Jointly Optimal RIS Placement and Power Allocation for Underlay D2D Communications: An Outage Probability Minimization Approach

Authors: Sarbani Ghose, Deepak Mishra, Santi P. Maity, George C. Alexandropoulos

Abstract: In this paper, we study underlay device-to-device (D2D) communication systems empowered by a reconfigurable intelligent surface (RIS) for cognitive cellular networks. Considering Rayleigh fading channels and the general case where there exist both the direct and RIS-enabled D2D channels, the outage probability (OP) of the D2D communication link is presented in closed-form. Next, for the considered… ▽ More In this paper, we study underlay device-to-device (D2D) communication systems empowered by a reconfigurable intelligent surface (RIS) for cognitive cellular networks. Considering Rayleigh fading channels and the general case where there exist both the direct and RIS-enabled D2D channels, the outage probability (OP) of the D2D communication link is presented in closed-form. Next, for the considered RIS-empowered underlaid D2D system, we frame an OP minimization problem. We target the joint optimization of the transmit power at the D2D source and the RIS placement, under constraints on the transmit power at the D2D source and on the limited interference imposed on the cellular user for two RIS deployment topologies. Due to the coupled optimization variables, the formulated optimization problem is extremely intractable. We propose an equivalent transformation which we are able to solve analytically. In the transformed problem, an expression for the average value of the signal-to-interference-noise ratio (SINR) at the D2D receiver is derived in closed-form. Our theoretical derivations are corroborated through simulation results, and various system design insights are deduced. It is indicatively showcased that the proposed RIS-empowered underlaid D2D system design outperforms the benchmark semi-adaptive optimal power and optimal distance schemes, offering $44\%$ and $20\%$ performance improvement, respectively. △ Less

Submitted 7 January, 2024; v1 submitted 21 December, 2023; originally announced December 2023.

Multi-Target Two-way Integrated Sensing and Communications with Full Duplex MIMO Radios

Authors: Muhammad Talha, Besma Smida, Md Atiqul Islam, George C. Alexandropoulos

Abstract: In this paper, we propose a multiple input multiple output (MIMO) Full-Duplex Integrated Sensing and Communication System consisting of multiple targets, a single downlink, and a single uplink user. We employed signal-to-interference plus noise ratio (SINR) as the performance metric for radar, downlink, and uplink communication. We use a communication-centric approach in which communication wavefo… ▽ More In this paper, we propose a multiple input multiple output (MIMO) Full-Duplex Integrated Sensing and Communication System consisting of multiple targets, a single downlink, and a single uplink user. We employed signal-to-interference plus noise ratio (SINR) as the performance metric for radar, downlink, and uplink communication. We use a communication-centric approach in which communication waveform is used for both communication and sensing of the environment. We develop a sensing algorithm capable of estimating the direction of arrival (DoA), range, and velocity of each target. We also propose a joint optimization framework for designing A/D transmit and receive beamformers to improve radar, downlink, and uplink SINRs while minimizing self-interference (SI) leakage. We also propose a null space projection (NSP) based approach to improve the uplink rate. Our simulation results, considering orthogonal frequency division multiplexing (OFDM) waveform, show accurate radar parameter estimation with improved downlink and uplink rate. △ Less

Submitted 16 December, 2023; originally announced December 2023.

Comments: 7 pages, 6 figures

Power Minimizing MEC Offloading with QoS Constraints over RIS-Empowered Communications

Authors: Mattia Merluzzi, Francesca Costanzo, Konstantinos D. Katsanos, George C. Alexandropoulos, Paolo Di Lorenzo

Abstract: This work lies at the intersection of two cutting edge technologies envisioned to proliferate in future 6G wireless systems: Multi-access Edge Computing (MEC) and Reconfigurable Intelligent Surfaces (RISs). While the former will bring a powerful information technology environment at the wireless edge, the latter will enhance communication performance, thanks to the possibility of adapting wireless… ▽ More This work lies at the intersection of two cutting edge technologies envisioned to proliferate in future 6G wireless systems: Multi-access Edge Computing (MEC) and Reconfigurable Intelligent Surfaces (RISs). While the former will bring a powerful information technology environment at the wireless edge, the latter will enhance communication performance, thanks to the possibility of adapting wireless propagation as per end users' convenience, according to specific service requirements. We propose a joint optimization of radio, computing, and wireless environment reconfiguration through an RIS, with the goal of enabling low power computation offloading services with reliability guarantees. Going beyond previous works on this topic, multi-carrier frequency selective RIS elements' responses and wireless channels are considered. This opens new challenges in RIS optimization, accounting for frequency dependent RIS response profiles, which strongly affect RIS-aided wireless links and, as a consequence, MEC service performance. We formulate an optimization problem accounting for short and long-term constraints involving device transmit power allocation across multiple subcarriers and local computing resources, as well as RIS reconfiguration parameters according to a recently developed Lorentzian model. Besides a theoretical optimization framework, numerical results show the effectiveness of the proposed method in enabling low power reliable computation offloading over RIS-aided frequency selective channels. △ Less

Submitted 15 December, 2023; originally announced December 2023.

Comments: IEEE GLOBECOM 2022

Wideband THz Multi-User Downlink Communications with Leaky Wave Antennas

Authors: Yaela Gabay, Nir Shlezinger, Tirza Routtenberg, Yasaman Ghasempour, George C. Alexandropoulos, Yonina C. Eldar

Abstract: Future wireless systems are envisioned to utilize the large spectra available at THz bands for wireless communications. Extremely massive multiple-input multiple-output (MIMO) antennas can be costly and power inefficient for wideband THz communications. An alternative antenna technology, which can achieve low cost and power efficient THz signaling, is based on leaky wave antennas (LWAs). In this p… ▽ More Future wireless systems are envisioned to utilize the large spectra available at THz bands for wireless communications. Extremely massive multiple-input multiple-output (MIMO) antennas can be costly and power inefficient for wideband THz communications. An alternative antenna technology, which can achieve low cost and power efficient THz signaling, is based on leaky wave antennas (LWAs). In this paper, we explore the usage of the LWAs for wideband downlink multi-user THz communications. We propose a model for LWA-aided communication systems that faithfully captures the antenna operations. We that LWAs yield frequency-dependent beams, where the equivalent wideband channel induces dependence between angle, frequency, and spectral lobe width. We identify the LWAs inherent frequency-selective beamsteering capabilities as motivating multi-band THz communications that deviate from conventional orthogonal frequency-division, and employ non-identical subbands. Then, we propose an alternating optimization algorithm for jointly optimizing the LWA configuration along with the spectral division and power allocation to maximize the achievable sum-rate. Our numerical results show that a single LWA can generate diverse beampatterns, exhibiting performance comparable to costly fully digital MIMO. Interestingly, we demonstrate that allowing transmission with non-identical subbands leverages the characteristics of LWA-based channels compared to uniform division, yielding improved beamsteering that translate to higher rates. △ Less

Submitted 30 July, 2024; v1 submitted 14 December, 2023; originally announced December 2023.

Comments: Under review in the IEEE

RIS Position and Orientation Estimation via Multi-Carrier Transmissions and Multiple Receivers

Authors: Reza Ghazalian, Hui Chen, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch, Riku Jäntti

Abstract: Reconfigurable intelligent surfaces (RISs) are considered as an enabling technology for the upcoming sixth generation of wireless systems, exhibiting significant potential for radio localization and sensing. An RIS is usually treated as an anchor point with known position and orientation when deployed to offer user localization. However, it can also be attached to a user to enable its localization… ▽ More Reconfigurable intelligent surfaces (RISs) are considered as an enabling technology for the upcoming sixth generation of wireless systems, exhibiting significant potential for radio localization and sensing. An RIS is usually treated as an anchor point with known position and orientation when deployed to offer user localization. However, it can also be attached to a user to enable its localization in a semi-passive manner. In this paper, we consider a static user equipped with an RIS and study the RIS localization problem (i.e., joint three-dimensional position and orientation estimation), when operating in a system comprising a single-antenna transmitter and multiple synchronized single-antenna receivers with known locations. We present a multi-stage estimator using time-of-arrival and spatial frequency measurements, and derive the Cramér-Rao lower bounds for the estimated parameters to validate the estimator's performance. Our simulation results demonstrate the efficiency of the proposed RIS state estimation approach under various system operation parameters. △ Less

Submitted 15 November, 2023; originally announced November 2023.

Autoregressive Attention Neural Networks for Non-Line-of-Sight User Tracking with Dynamic Metasurface Antennas

Authors: Kyriakos Stylianopoulos, Murat Bayraktar, Nuria González Prelcic, George C. Alexandropoulos

Abstract: User localization and tracking in the upcoming generation of wireless networks have the potential to be revolutionized by technologies such as the Dynamic Metasurface Antennas (DMAs). Commonly proposed algorithmic approaches rely on assumptions about relatively dominant Line-of-Sight (LoS) paths, or require pilot transmission sequences whose length is comparable to the number of DMA elements, thus… ▽ More User localization and tracking in the upcoming generation of wireless networks have the potential to be revolutionized by technologies such as the Dynamic Metasurface Antennas (DMAs). Commonly proposed algorithmic approaches rely on assumptions about relatively dominant Line-of-Sight (LoS) paths, or require pilot transmission sequences whose length is comparable to the number of DMA elements, thus, leading to limited effectiveness and considerable measurement overheads in blocked LoS and dynamic multipath environments. In this paper, we present a two-stage machine-learning-based approach for user tracking, specifically designed for non-LoS multipath settings. A newly proposed attention-based Neural Network (NN) is first trained to map noisy channel responses to potential user positions, regardless of user mobility patterns. This architecture constitutes a modification of the prominent vision transformer, specifically modified for extracting information from high-dimensional frequency response signals. As a second stage, the NN's predictions for the past user positions are passed through a learnable autoregressive model to exploit the time-correlated channel information and obtain the final position predictions. The channel estimation procedure leverages a DMA receive architecture with partially-connected radio frequency chains, which results to reduced numbers of pilots. The numerical evaluation over an outdoor ray-tracing scenario illustrates that despite LoS blockage, this methodology is capable of achieving high position accuracy across various multipath settings. △ Less

Submitted 30 October, 2023; originally announced October 2023.

Comments: 5 pages, 3 figures, accepted for presentation by 2023 IEEE International Workshop on Computational Advances in Multi-Sensor Adaptive Processing (CAMSAP 2023)

Time-Domain Channel Estimation for Extremely Large MIMO THz Communication Systems Under Dual-Wideband Fading Conditions

Authors: Evangelos Vlachos, Aryan Kaushik, Yonina C. Eldar, George C. Alexandropoulos

Abstract: In this paper, we study the problem of extremely large (XL) multiple-input multiple-output (MIMO) channel estimation in the terahertz (THz) frequency band, considering the presence of propagation delays across the entire array apertures at both communication ends, which naturally leads to frequency selectivity. This problem is known as beam squint and may be pronounced when communications are subj… ▽ More In this paper, we study the problem of extremely large (XL) multiple-input multiple-output (MIMO) channel estimation in the terahertz (THz) frequency band, considering the presence of propagation delays across the entire array apertures at both communication ends, which naturally leads to frequency selectivity. This problem is known as beam squint and may be pronounced when communications are subject to multipath fading conditions. Multi-carrier (MC) transmission schemes, which are usually deployed in THz communication systems to address these issues, suffer from high peak-to-average power ratio, which is specifically dominant in this frequency band where low transmit power is mostly feasible. Furthermore, the frequency selectivity caused by severe molecular absorption in the THz band necessitates delicate consideration in MC system design. Motivated by the benefits of single-carrier (SC) waveforms for practical THz communication systems, diverging from the current dominant research trend on MC systems, we devise a novel channel estimation problem formulation in the time domain for SC XL MIMO systems subject to multipath signal propagation, spatial wideband effects, and molecular absorption. An efficient alternating minimization approach is presented to solve the proposed mixed-integer sparse problem formulation. The conducted extensive performance evaluation results validate that the proposed XL MIMO estimation scheme exhibits superior performance than conventional SC- and MC-based techniques, approaching the idealized lower bound. △ Less

Submitted 8 July, 2024; v1 submitted 23 October, 2023; originally announced October 2023.

On the Performance Analysis of RIS-Empowered Communications Over Nakagami-m Fading

Authors: Dimitris Selimis, Kostas P. Peppas, George C. Alexandropoulos, Fotis I. Lazarakis

Abstract: In this paper, we study the performance of wireless communications empowered by Reconfigurable Intelligent Surface (RISs) over Nakagami-m fading channels. We consider two phase configuration designs for the RIS, one random and another one based on coherent phase shifting. For both phase configuration cases, we present single-integral expressions for the outage probability and the bit error rate of… ▽ More In this paper, we study the performance of wireless communications empowered by Reconfigurable Intelligent Surface (RISs) over Nakagami-m fading channels. We consider two phase configuration designs for the RIS, one random and another one based on coherent phase shifting. For both phase configuration cases, we present single-integral expressions for the outage probability and the bit error rate of binary modulation schemes, which can be efficiently evaluated numerically. In addition, we propose accurate closed-form approximations for the ergodic capacity of the considered system. For all considered metrics, we have also derived simple analytical expressions that become tight for large numbers of RIS reflecting elements. Numerically evaluated results compared with Monte Carlo simulations are presented in order to verify the correctness of the proposed analysis and showcase the impact of various system settings. △ Less

Submitted 21 September, 2023; originally announced September 2023.

Journal ref: IEEE Communications Letters, 2021, Volume 25 Issue 7, Pages 2191-2195

Massive Access of Static and Mobile Users via Reconfigurable Intelligent Surfaces: Protocol Design and Performance Analysis

Authors: Xuelin Cao, Bo Yang, Chongwen Huang, George C. Alexandropoulos, Chau Yuen, Zhu Han, H. Vincent Poor, Lajos Hanzo

Abstract: The envisioned wireless networks of the future entail the provisioning of massive numbers of connections, heterogeneous data traffic, ultra-high spectral efficiency, and low latency services. This vision is spurring research activities focused on defining a next generation multiple access (NGMA) protocol that can accommodate massive numbers of users in different resource blocks, thereby, achieving… ▽ More The envisioned wireless networks of the future entail the provisioning of massive numbers of connections, heterogeneous data traffic, ultra-high spectral efficiency, and low latency services. This vision is spurring research activities focused on defining a next generation multiple access (NGMA) protocol that can accommodate massive numbers of users in different resource blocks, thereby, achieving higher spectral efficiency and increased connectivity compared to conventional multiple access schemes. In this article, we present a multiple access scheme for NGMA in wireless communication systems assisted by multiple reconfigurable intelligent surfaces (RISs). In this regard, considering the practical scenario of static users operating together with mobile ones, we first study the interplay of the design of NGMA schemes and RIS phase configuration in terms of efficiency and complexity. Based on this, we then propose a multiple access framework for RIS-assisted communication systems, and we also design a medium access control (MAC) protocol incorporating RISs. In addition, we give a detailed performance analysis of the designed RIS-assisted MAC protocol. Our extensive simulation results demonstrate that the proposed MAC design outperforms the benchmarks in terms of system throughput and access fairness, and also reveal a trade-off relationship between the system throughput and fairness. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Spatial Secrecy Spectral Efficiency Optimization Enabled by Reconfigurable Intelligent Surfaces

Authors: Konstantinos D. Katsanos, George C. Alexandropoulos

Abstract: Reconfigurable Intelligent Surfaces (RISs) constitute a strong candidate physical-layer technology for the $6$-th Generation (6G) of wireless networks, offering new design degrees of freedom for efficiently addressing demanding performance objectives. In this paper, we consider a Multiple-Input Single-Output (MISO) physical-layer security system incorporating a reflective RIS to safeguard wireless… ▽ More Reconfigurable Intelligent Surfaces (RISs) constitute a strong candidate physical-layer technology for the $6$-th Generation (6G) of wireless networks, offering new design degrees of freedom for efficiently addressing demanding performance objectives. In this paper, we consider a Multiple-Input Single-Output (MISO) physical-layer security system incorporating a reflective RIS to safeguard wireless communications between a legitimate transmitter and receiver under the presence of an eavesdropper. In contrast to current studies optimizing RISs for given positions of the legitimate and eavesdropping nodes, in this paper, we focus on devising RIS-enabled secrecy for given geographical areas of potential nodes' placement. We propose a novel secrecy metric, capturing the spatially averaged secrecy spectral efficiency, and present a joint design of the transmit digital beamforming and the RIS analog phase profile, which is realized via a combination of alternating optimization and minorization-maximization. The proposed framework bypasses the need for instantaneous knowledge of the eavesdropper's channel or position, and targets providing an RIS-boosted secure area of legitimate communications with a single configuration of the free parameters. Our simulation results showcase significant performance gains with the proposed secrecy scheme, even for cases where the eavesdropper shares similar pathloss attenuation with the legitimate receiver. △ Less

Submitted 19 June, 2023; originally announced June 2023.

Comments: to be presented in EUSIPCO 2023

Full-Duplex-Enabled Joint Communications and Sensing with Reconfigurable Intelligent Surfaces

Authors: Chandan Kumar Sheemar, George C. Alexandropoulos, Dirk Slock, Jorge Querol, Symeon Chatzinotas

Abstract: The full-duplex (FD) technology has the potential to radically evolve wireless systems, facilitating the integration of both communications and radar functionalities into a single device, thus, enabling joint communication and sensing (JCAS). In this paper, we present a novel approach for JCAS that incorporates a reconfigurable intelligent surface (RIS) in the near-field of an FD multiple-input mu… ▽ More The full-duplex (FD) technology has the potential to radically evolve wireless systems, facilitating the integration of both communications and radar functionalities into a single device, thus, enabling joint communication and sensing (JCAS). In this paper, we present a novel approach for JCAS that incorporates a reconfigurable intelligent surface (RIS) in the near-field of an FD multiple-input multiple-output (MIMO) node, which is jointly optimized with the digital beamformers to enable JSAC and efficiently handle self-interference (SI). We propose a novel problem formulation for FD MIMO JCAS systems to jointly minimize the total received power at the FD node's radar receiver while maximizing the sum rate of downlink communications subject to a Cramér-Rao bound (CRB) constraint. In contrast to the typically used CRB in the relevant literature, we derive a novel, more accurate, target estimation bound that fully takes into account the RIS deployment. The considered problem is solved using alternating optimization, which is guaranteed to converge to a local optimum. The simulation results demonstrate that the proposed scheme achieves significant performance improvement both for communications and sensing. It is showcased that, jointly designing the FD MIMO beamformers and the RIS phase configuration to be SI aware can significantly loosen the requirement for additional SI cancellation. △ Less

Submitted 19 June, 2023; originally announced June 2023.

Stacked Intelligent Metasurfaces for Efficient Holographic MIMO Communications in 6G

Authors: Jiancheng An, Chao Xu, Derrick Wing Kwan Ng, George C. Alexandropoulos, Chongwen Huang, Chau Yuen, Lajos Hanzo

Abstract: The revolutionary technology of \emph{Stacked Intelligent Metasurfaces (SIM)} has been recently shown to be capable of carrying out advanced signal processing directly in the native electromagnetic (EM) wave domain. An SIM is fabricated by a sophisticated amalgam of multiple stacked metasurface layers, which may outperform its single-layer metasurface counterparts, such as reconfigurable intellige… ▽ More The revolutionary technology of \emph{Stacked Intelligent Metasurfaces (SIM)} has been recently shown to be capable of carrying out advanced signal processing directly in the native electromagnetic (EM) wave domain. An SIM is fabricated by a sophisticated amalgam of multiple stacked metasurface layers, which may outperform its single-layer metasurface counterparts, such as reconfigurable intelligent surfaces (RISd) and metasurface lenses. We harness this new SIM concept for implementing efficient holographic multiple-input multiple-output (HMIMO) communications that dot require excessive radio-frequency (RF) chains, which constitutes a substantial benefit compared to existing implementations. We first present an HMIMO communication system based on a pair of SIMs at the transmitter (TX) and receiver (RX), respectively. In sharp contrast to the conventional MIMO designs, the considered SIMs are capable of automatically accomplishing transmit precoding and receiver combining, as the EM waves propagate through them. As such, each information data stream can be directly radiated and recovered from the corresponding transmit and receive ports. Secondly, we formulate the problem of minimizing the error between the actual end-to-end SIMs'parametrized channel matrix and the target diagonal one, with the latter representing a flawless interference-free system of parallel subchannels. This is achieved by jointly optimizing the phase shifts associated with all the metasurface layers of both the TX-SIM and RX-SIM. We then design a gradient descent algorithm to solve the resultant non-convex problem. Furthermore, we theoretically analyze the HMIMO channel capacity bound and provide some useful fundamental insights. Extensive simulation results are provided for characterizing our SIM-based HMIMO system, quantifying its substantial performance benefits. △ Less

Submitted 14 May, 2023; originally announced May 2023.

Comments: 17 pages, 17 figures, 1 table, accepted by IEEE JSAC

WiThRay: A Versatile Ray-Tracing Simulator for Smart Wireless Environments

Authors: Hyuckjin Choi, Jaehoon Chung, Jaeky Oh, George C. Alexandropoulos, Junil Choi

Abstract: This paper presents the development and evaluation of WiThRay, a new wireless three-dimensional ray-tracing (RT) simulator. RT-based simulators are widely used for generating realistic channel data by combining RT methodology to get signal trajectories and electromagnetic (EM) equations, resulting in generalized channel impulse responses (CIRs). This paper first provides a comprehensive comparison… ▽ More This paper presents the development and evaluation of WiThRay, a new wireless three-dimensional ray-tracing (RT) simulator. RT-based simulators are widely used for generating realistic channel data by combining RT methodology to get signal trajectories and electromagnetic (EM) equations, resulting in generalized channel impulse responses (CIRs). This paper first provides a comprehensive comparison on methodologies of existing RT-based simulators. We then introduce WiThRay, which can evaluate the performance of various wireless communication techniques such as channel estimation/tracking, beamforming, and localization in realistic EM wave propagation. WiThRay implements its own RT methodology, the bypassing on edge (BE) algorithm, that follows the Fermat's principle and has low computational complexity. The scattering ray calibration in WiThRay also provides a precise solution in the analysis of EM propagation. Different from most of the previous RT-based simulators, WiThRay incorporates reconfigurable intelligent surfaces (RIS), which will be a key component of future wireless communications. We thoroughly show that the channel data from WiThRay match sufficiently well with the fundamental theory of wireless channels. The virtue of WiThRay lies in its feature of not making any assumption about the channel, like being slow/fast fading or frequency selective. A realistic wireless environment, which can be conveniently simulated via WiThRay, naturally defines the physical properties of the wireless channels. WiThRay is open to the public, and anyone can exploit this versatile simulator to develop and test their communications and signal processing techniques. △ Less

Submitted 22 April, 2023; originally announced April 2023.

Comments: 23 pages, 25 figures, submitted to IEEE Access

Full-Duplex Wireless for 6G: Progress Brings New Opportunities and Challenges

Authors: Besma Smida, Ashutosh Sabharwal, Gabor Fodor, George C. Alexandropoulos, Himal A. Suraweera, Chan-Byoung Chae

Abstract: The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band F… ▽ More The use of in-band full-duplex (FD) enables nodes to simultaneously transmit and receive on the same frequency band, which challenges the traditional assumption in wireless network design. The full-duplex capability enhances spectral efficiency and decreases latency, which are two key drivers pushing the performance expectations of next-generation mobile networks. In less than ten years, in-band FD has advanced from being demonstrated in research labs to being implemented in standards, presenting new opportunities to utilize its foundational concepts. Some of the most significant opportunities include using FD to enable wireless networks to sense the physical environment, integrate sensing and communication applications, develop integrated access and backhaul solutions, and work with smart signal propagation environments powered by reconfigurable intelligent surfaces. However, these new opportunities also come with new challenges for large-scale commercial deployment of FD technology, such as managing self-interference, combating cross-link interference in multi-cell networks, and coexistence of dynamic time division duplex, subband FD and FD networks. △ Less

Submitted 24 April, 2023; v1 submitted 18 April, 2023; originally announced April 2023.

Comments: 21 pages, 15 figures, accepted to an IEEE Journal

On the Impact of Control Signaling in RIS-Empowered Wireless Communications

Authors: Fabio Saggese, Victor Croisfelt, Radosław Kotaba, Kyriakos Stylianopoulos, George C. Alexandropoulos, Petar Popovski

Abstract: The research on Reconfigurable Intelligent Surfaces (RISs) has dominantly been focused on physical-layer aspects and analyses of the achievable adaptation of the wireless propagation environment. Compared to that, questions related to system-level integration of RISs have received less attention. We address this research gap by analyzing the necessary control/signaling operations that are necessar… ▽ More The research on Reconfigurable Intelligent Surfaces (RISs) has dominantly been focused on physical-layer aspects and analyses of the achievable adaptation of the wireless propagation environment. Compared to that, questions related to system-level integration of RISs have received less attention. We address this research gap by analyzing the necessary control/signaling operations that are necessary to integrate RIS as a new type of wireless infrastructure element. We build a general model for evaluating the impact of control operations along two dimensions: i) the allocated bandwidth of the control channels (in-band and out-of-band), and ii) the rate selection for the data channel (multiplexing or diversity). Specifically, the second dimension results in two generic transmission schemes, one based on channel estimation and the subsequent optimization of the RIS, while the other is based on sweeping through predefined RIS phase configurations. We analyze the communication performance in multiple setups built along these two dimensions. While necessarily simplified, our analysis reveals the basic trade-offs in RIS-assisted communication and the associated control operations. The main contribution of the paper is a methodology for systematic evaluation of the control overhead in RIS-aided networks, regardless of the specific control schemes used. △ Less

Submitted 30 October, 2023; v1 submitted 29 March, 2023; originally announced March 2023.

Comments: Submitted to IEEE TWC, the copyright may be transferred without further notice

Performance of RIS-Aided Nearfield Localization under Beams Approximation from Real Hardware Characterization

Authors: Moustafa Rahal, Benoit Denis, Kamran Keykhosravi, Musa Furkan Keskin, Bernard Uguen, George C. Alexandropoulos, Henk Wymeersch

Abstract: The technology of reconfigurable intelligent surfaces (RIS) has been showing promising potential in a variety of applications relying on Beyond-5G networks. Reconfigurable intelligent surface (RIS) can indeed provide fine channel flexibility to improve communication quality of service (QoS) or restore localization capabilities in challenging operating conditions, while conventional approaches fail… ▽ More The technology of reconfigurable intelligent surfaces (RIS) has been showing promising potential in a variety of applications relying on Beyond-5G networks. Reconfigurable intelligent surface (RIS) can indeed provide fine channel flexibility to improve communication quality of service (QoS) or restore localization capabilities in challenging operating conditions, while conventional approaches fail (e.g., due to insufficient infrastructure, severe radio obstructions). In this paper, we tackle a general low-complexity approach for optimizing the precoders that control such reflective surfaces under hardware constraints. More specifically, it allows the approximation of any desired beam pattern using a pre-characterized look-up table of feasible complex reflection coefficients for each RIS element. The proposed method is first evaluated in terms of beam fidelity for several examples of RIS hardware prototypes. Then, by means of a theoretical bounds analysis, we examine the impact of RIS beams approximation on the performance of near-field downlink positioning in non-line-of-sight conditions, while considering several RIS phase profiles (incl. directional, random and localization-optimal designs). Simulation results in a canonical scenario illustrate how the introduced RIS profile optimization scheme can reliably produce the desired RIS beams under realistic hardware limitations. They also highlight its sensitivity to both the underlying hardware characteristics and the required beam kinds in relation to the specificity of RIS-aided localization applications. △ Less

Submitted 27 March, 2023; originally announced March 2023.

Comments: 27 pages, 8 figures, journal

Full Duplex Holographic MIMO for Near-Field Integrated Sensing and Communications

Authors: Ioannis Gavras, Md Atiqul Islam, Besma Smida, George C. Alexandropoulos

Abstract: This paper presents an in-band Full Duplex (FD) integrated sensing and communications system comprising a holographic Multiple-Input Multiple-Output (MIMO) base station, which is capable to simultaneously communicate with multiple users in the downlink direction, while sensing targets being randomly distributed within its coverage area. Considering near-field wireless operation at THz frequencies,… ▽ More This paper presents an in-band Full Duplex (FD) integrated sensing and communications system comprising a holographic Multiple-Input Multiple-Output (MIMO) base station, which is capable to simultaneously communicate with multiple users in the downlink direction, while sensing targets being randomly distributed within its coverage area. Considering near-field wireless operation at THz frequencies, the FD node adopts dynamic metasurface antenna panels for both transmission and reception, which consist of massive numbers of sub-wavelength-spaced metamaterials, enabling reduced cost and power consumption analog precoding and combining. We devise an optimization framework for the FD node's reconfigurable parameters with the dual objective of maximizing the targets' parameters estimation accuracy and the downlink communication performance. Our simulation results verify the integrated sensing and communications capability of the proposed FD holographic MIMO system, showcasing the interplays among its various design parameters. △ Less

Submitted 7 August, 2023; v1 submitted 14 March, 2023; originally announced March 2023.

Comments: 5 pages, 3 figures, EUSIPCO 2023

Indexed Multiple Access with Reconfigurable Intelligent Surfaces: The Reflection Tuning Potential

Authors: Rohit Singh, Aryan Kaushik, Wonjae Shin, George C. Alexandropoulos, Mesut Toka, Marco Di Renzo

Abstract: Indexed modulation (IM) is an evolving technique that has become popular due to its ability of parallel data communication over distinct combinations of transmission entities. In this article, we first provide a comprehensive survey of IM-enabled multiple access (MA) techniques, emphasizing the shortcomings of existing non-indexed MA schemes. Theoretical comparisons are presented to show how the n… ▽ More Indexed modulation (IM) is an evolving technique that has become popular due to its ability of parallel data communication over distinct combinations of transmission entities. In this article, we first provide a comprehensive survey of IM-enabled multiple access (MA) techniques, emphasizing the shortcomings of existing non-indexed MA schemes. Theoretical comparisons are presented to show how the notion of indexing eliminates the limitations of non-indexed solutions. We also discuss the benefits that the utilization of a reconfigurable intelligent surface (RIS) can offer when deployed as an indexing entity. In particular, we propose an RIS-indexed multiple access (RIMA) transmission scheme that utilizes dynamic phase tuning to embed multi-user information over a single carrier. The performance of the proposed RIMA is assessed in light of simulation results that confirm its performance gains. The article further includes a list of relevant open technical issues and research directions. △ Less

Submitted 15 February, 2023; originally announced February 2023.

Comments: 7 pages, 5 figures, 1 table

Channel Modeling and Multi-User Precoding for Tri-Polarized Holographic MIMO Communications

Authors: Li Wei, Chongwen Huang, George C. Alexandropoulos, Zhaohui Yang, Jun Yang, Wei E. I. Sha, Merouane Debbah, Chau Yuen

Abstract: This paper studies the exploitation of triple polarization (TP) for multi-user (MU) holographic multiple-input multiple-output surface (HMIMOS) wireless communication systems, aiming at capacity boosting without enlarging the antenna array size. We specifically consider that both the transmitter and receiver are equipped with an HMIMOS comprising compact sub-wavelength TP patch antennas. To charac… ▽ More This paper studies the exploitation of triple polarization (TP) for multi-user (MU) holographic multiple-input multiple-output surface (HMIMOS) wireless communication systems, aiming at capacity boosting without enlarging the antenna array size. We specifically consider that both the transmitter and receiver are equipped with an HMIMOS comprising compact sub-wavelength TP patch antennas. To characterize TP MUHMIMOS systems, a TP near-field channel model is proposed using the dyadic Green's function, whose characteristics are leveraged to design a user-cluster-based precoding scheme for mitigating the cross-polarization and inter-user interference contributions. A theoretical correlation analysis for HMIMOS with infinitely small patch antennas is also presented. According to the proposed scheme, the users are assigned to one of the three polarizations, which is easy to implement, at the cost, however, of reducing the system's diversity. Our numerical results showcase that the cross-polarization channel components have a nonnegligible impact on the system performance, which is efficiently eliminated with the proposed MU precoding scheme. △ Less

Submitted 10 February, 2023; originally announced February 2023.

Comments: arXiv admin note: substantial text overlap with arXiv:2211.03479

On the Tacit Linearity Assumption in Common Cascaded Models of RIS-Parametrized Wireless Channels

Authors: Antonin Rabault, Luc Le Magoarou, Jérôme Sol, George C. Alexandropoulos, Nir Shlezinger, H. Vincent Poor, Philipp del Hougne

Abstract: We analytically derive from first physical principles the functional dependence of wireless channels on the RIS configuration for generic (i.e., potentially complex-scattering) RIS-parametrized radio environments. The wireless channel is a linear input-output relation that depends non-linearly on the RIS configuration because of two independent mechanisms: i) proximity-induced mutual coupling betw… ▽ More We analytically derive from first physical principles the functional dependence of wireless channels on the RIS configuration for generic (i.e., potentially complex-scattering) RIS-parametrized radio environments. The wireless channel is a linear input-output relation that depends non-linearly on the RIS configuration because of two independent mechanisms: i) proximity-induced mutual coupling between close-by RIS elements; ii) reverberation-induced long-range coupling between all RIS elements. Mathematically, this "structural" non-linearity originates from the inversion of an "interaction" matrix that can be cast as the sum of an infinite Born series [for i)] or Born-like series [for ii)] whose $K$th term physically represents paths involving $K$ bounces between the RIS elements [for i)] or wireless entities [for ii)]. We identify the key physical parameters that determine whether these series can be truncated after the first and second term, respectively, as tacitly done in common cascaded models of RIS-parametrized wireless channels. Numerical results obtained with the physics-compliant PhysFad model and experimental results obtained with a RIS prototype in an anechoic (echo-free) chamber and rich-scattering reverberation chambers corroborate our analysis. Our findings raise doubts about the reliability of existing performance analysis and channel-estimation protocols for cases in which cascaded models poorly describe the physical reality. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Comments: 30 pages, 5 figures, submitted to an IEEE Journal

STAR-RIS-Enabled Simultaneous Indoor and Outdoor 3D Localization: Theoretical Analysis and Algorithmic Design

Authors: Jiguang He, Aymen Fakhreddine, George C. Alexandropoulos

Abstract: Recent research and development interests deal with metasurfaces for wireless systems beyond their consideration as intelligent tunable reflectors. Among the latest proposals is the simultaneously transmitting (a.k.a. refracting) and reflecting reconfigurable intelligent surface (STAR-RIS) which intends to enable bidirectional indoor-to-outdoor, and vice versa, communications thanks to its additio… ▽ More Recent research and development interests deal with metasurfaces for wireless systems beyond their consideration as intelligent tunable reflectors. Among the latest proposals is the simultaneously transmitting (a.k.a. refracting) and reflecting reconfigurable intelligent surface (STAR-RIS) which intends to enable bidirectional indoor-to-outdoor, and vice versa, communications thanks to its additional refraction capability. This double functionality provides increased flexibility in concurrently satisfying the quality-of-service requirements of users located at both sides of the metasurfaces, for example, the achievable data rate and localization accuracy. In this paper, we focus on STAR-RIS-empowered simultaneous indoor and outdoor three-dimensional (3D) localization, and study the fundamental performance limits via Fisher information analyses and Cramér Rao lower bounds (CRLBs). We also devise an efficient localization algorithm based on an off-grid compressive sensing (CS) technique relying on atomic norm minimization (ANM). The impact of the training overhead, the power splitting at the STAR-RIS, the power allocation between the users, the STAR-RIS size, the imperfections of the STAR-RIS-to-BS channel, as well as the role of the multi-path components on the positioning performance are assessed via extensive computer simulations. It is theoretically showcased that high-accuracy, up to centimeter level, 3D localization can be simultaneously achieved for indoor and outdoor users, which is also accomplished via the proposed ANM-based estimation algorithm. △ Less

Submitted 7 February, 2023; originally announced February 2023.

Comments: 9 double-column pages, 6 figures, invited paper for IET Signal Processing. arXiv admin note: text overlap with arXiv:2207.05344

RISs and Sidelink Communications in Smart Cities: The Key to Seamless Localization and Sensing

Authors: Hui Chen, Hyowon Kim, Mustafa Ammous, Gonzalo Seco-Granados, George C. Alexandropoulos, Shahrokh Valaee, Henk Wymeersch

Abstract: A smart city involves, among other elements, intelligent transportation, crowd monitoring, and digital twins, each of which requires information exchange via wireless communication links and localization of connected devices and passive objects (including people). Although localization and sensing (L&S) are envisioned as core functions of future communication systems, they have inherently differen… ▽ More A smart city involves, among other elements, intelligent transportation, crowd monitoring, and digital twins, each of which requires information exchange via wireless communication links and localization of connected devices and passive objects (including people). Although localization and sensing (L&S) are envisioned as core functions of future communication systems, they have inherently different demands in terms of infrastructure compared to communications. Wireless communications generally requires a connection to only a single access point (AP), while L&S demand simultaneous line-of-sight propagation paths to several APs, which serve as location and orientation anchors. Hence, a smart city deployment optimized for communication will be insufficient to meet stringent L&S requirements. In this article, we argue that the emerging technologies of reconfigurable intelligent surfaces (RISs) and sidelink communications constitute the key to providing ubiquitous coverage for L&S in smart cities with low-cost and energy-efficient technical solutions. To this end, we propose and evaluate AP-coordinated and self-coordinated RIS-enabled L&S architectures and detail three groups of application scenarios, relying on low-complexity beacons, cooperative localization, and full-duplex transceivers. A list of practical issues and consequent open research challenges of the proposed L&S systems is also provided. △ Less

Submitted 9 March, 2023; v1 submitted 9 January, 2023; originally announced January 2023.

RIS-Aided Monostatic Sensing and Object Detection with Single and Double Bounce Multipath

Authors: Hyowon Kim, Alessio Fascista, Hui Chen, Yu Ge, George C. Alexandropoulos, Gonzalo Seco-Granados, Henk Wymeersch

Abstract: We propose a framework for monostatic sensing by a user equipment (UE), aided by a reconfigurable intelligent surface (RIS) in environments with single- and double-bounce signal propagation. We design appropriate UE-side precoding and combining, to facilitate signal separation. We derive the adaptive detection probabilities of the resolvable signals, based on the geometric channel parameters of th… ▽ More We propose a framework for monostatic sensing by a user equipment (UE), aided by a reconfigurable intelligent surface (RIS) in environments with single- and double-bounce signal propagation. We design appropriate UE-side precoding and combining, to facilitate signal separation. We derive the adaptive detection probabilities of the resolvable signals, based on the geometric channel parameters of the links. Then, we estimate the passive objects using both the double-bounce signals via passive RIS (i.e., RIS-sensing) and the single-bounce multipath direct to the objects (i.e., non-RIS-sensing), based on a mapping filter. Finally, we provide numerical results to demonstrate that effective sensing can be achieved through the proposed framework. △ Less

Submitted 13 November, 2023; v1 submitted 14 December, 2022; originally announced December 2022.

RIS-Enabled and Access-Point-Free Simultaneous Radio Localization and Mapping

Authors: Hyowon Kim, Hui Chen, Musa Furkan Keskin, Yu Ge, Kamran Keykhosravi, George C. Alexandropoulos, Sunwoo Kim, Henk Wymeersch

Abstract: In the upcoming sixth generation (6G) of wireless communication systems, reconfigurable intelligent surfaces~(RISs) are regarded as one of the promising technological enablers, which can provide programmable signal propagation. Therefore, simultaneous radio localization and mapping(SLAM) with RISs appears as an emerging research direction within the 6G ecosystem. In this paper, we propose a novel… ▽ More In the upcoming sixth generation (6G) of wireless communication systems, reconfigurable intelligent surfaces~(RISs) are regarded as one of the promising technological enablers, which can provide programmable signal propagation. Therefore, simultaneous radio localization and mapping(SLAM) with RISs appears as an emerging research direction within the 6G ecosystem. In this paper, we propose a novel framework of RIS-enabled radio SLAM for wireless operation without the intervention of access points (APs). We first design the RIS phase profiles leveraging prior information for the user equipment~(UE), such that they uniformly illuminate the angular sector where the UE is probabilistically located. Second, we modify the marginal Poisson multi-Bernoulli SLAM filter and estimate the UE state and landmarks, which enables efficient mapping of the radio propagation environment. Third, we derive the theoretical Cramér-Rao lower bounds on the estimators for the channel parameters and the UE state. We finally evaluate the performance of the proposed method under scenarios with a limited number of transmissions, taking into account the channel coherence time. Our results demonstrate that the RIS enables solving the radio SLAM problem with zero APs, and that the consideration of the Doppler shift contributes to improving the UE speed estimates. △ Less

Submitted 14 December, 2022; originally announced December 2022.

3D Localization with a Single Partially-Connected Receiving RIS: Positioning Error Analysis and Algorithmic Design

Authors: Jiguang He, Aymen Fakhreddine, Charles Vanwynsberghe, Henk Wymeersch, George C. Alexandropoulos

Abstract: In this paper, we introduce the concept of partially-connected Receiving Reconfigurable Intelligent Surfaces (R-RISs), which refers to metasurfaces designed to efficiently sense electromagnetic waveforms impinging on them, and perform localization of the users emitting them. The presented R-RIS hardware architecture comprises subarrays of meta-atoms, with each of them incorporating a waveguide ass… ▽ More In this paper, we introduce the concept of partially-connected Receiving Reconfigurable Intelligent Surfaces (R-RISs), which refers to metasurfaces designed to efficiently sense electromagnetic waveforms impinging on them, and perform localization of the users emitting them. The presented R-RIS hardware architecture comprises subarrays of meta-atoms, with each of them incorporating a waveguide assigned to direct the waveforms reaching its meta-atoms to a reception Radio-Frequency (RF) chain, enabling signal/channel parameter estimation. We particularly focus on the scenarios where the user is located in the far-field of all the R-RIS subarrays, and present a three-Dimensional (3D) localization method which is based on narrowband signaling and Angle of Arrival (AoA) estimates of the impinging signals at each single-receive-RF R-RIS subarray. For the AoA estimation, which relies on spatially sampled versions of the received signals via each subarray's phase configuration of meta-atoms, we devise an off-grid atomic norm minimization approach, which is followed by subspace-based root MUltiple SIgnal Classification (MUSIC). The AoA estimates are finally combined via a least-squared line intersection method to obtain the position coordinates of a user emitting synchronized localization pilots. Our derived theoretical Cramér Rao Lower Bounds (CRLBs) on the estimation parameters, which are compared with extensive computer simulation results of our localization approach, verify the effectiveness of the proposed R-RIS-empowered 3D localization system, which is showcased to offer cm-level positioning accuracy. Our comprehensive performance evaluations also demonstrate the impact of various system parameters on the localization performance, namely the training overhead and the distance between the R-RIS and the user, as well as the spacing among the R-RIS's subarrays and its partitioning patterns. △ Less

Submitted 5 December, 2022; originally announced December 2022.

Comments: 11 pages (double column), 6 figures, submitted to IEEE TVT

Holographic MIMO Communications: Theoretical Foundations, Enabling Technologies, and Future Directions

Authors: Tierui Gong, Panagiotis Gavriilidis, Ran Ji, Chongwen Huang, George C. Alexandropoulos, Li Wei, Zhaoyang Zhang, Mérouane Debbah, H. Vincent Poor, Chau Yuen

Abstract: Future wireless systems are envisioned to create an endogenously holography-capable, intelligent, and programmable radio propagation environment, that will offer unprecedented capabilities for high spectral and energy efficiency, low latency, and massive connectivity. A potential and promising technology for supporting the expected extreme requirements of the sixth-generation (6G) communication sy… ▽ More Future wireless systems are envisioned to create an endogenously holography-capable, intelligent, and programmable radio propagation environment, that will offer unprecedented capabilities for high spectral and energy efficiency, low latency, and massive connectivity. A potential and promising technology for supporting the expected extreme requirements of the sixth-generation (6G) communication systems is the concept of the holographic multiple-input multiple-output (HMIMO), which will actualize holographic radios with reasonable power consumption and fabrication cost. The HMIMO is facilitated by ultra-thin, extremely large, and nearly continuous surfaces that incorporate reconfigurable and sub-wavelength-spaced antennas and/or metamaterials. Such surfaces comprising dense electromagnetic (EM) excited elements are capable of recording and manipulating impinging fields with utmost flexibility and precision, as well as with reduced cost and power consumption, thereby shaping arbitrary-intended EM waves with high energy efficiency. The powerful EM processing capability of HMIMO opens up the possibility of wireless communications of holographic imaging level, paving the way for signal processing techniques realized in the EM-domain, possibly in conjunction with their digital-domain counterparts. However, in spite of the significant potential, the studies on HMIMO communications are still at an initial stage, its fundamental limits remain to be unveiled, and a certain number of critical technical challenges need to be addressed. In this survey, we present a comprehensive overview of the latest advances in the HMIMO communications paradigm, with a special focus on their physical aspects, their theoretical foundations, as well as the enabling technologies for HMIMO systems. We also compare the HMIMO with existing multi-antenna technologies, especially the massive MIMO, present various... △ Less

Submitted 28 August, 2023; v1 submitted 2 December, 2022; originally announced December 2022.

Comments: double column, 60 pages, 26 figures, 11 tables, accepted by IEEE Communications Surveys and Tutorials

Tri-Polarized Holographic MIMO Surface in Near-Field: Channel Modeling and Precoding Design

Authors: Li Wei, Chongwen Huang, George C. Alexandropoulos, Zhaohui Yang, Jun Yang, Wei E. I. Sha, Zhaoyang Zhang, Merouane Debbah, Chau Yuen

Abstract: This paper investigates the utilization of triple polarization (TP) for multi-user (MU) holographic multiple-input multi-output surface (HMIMOS) wireless communication systems, targeting capacity boosting and diversity exploitation without enlarging the antenna array sizes. We specifically consider that both the transmitter and receiver are both equipped with an HMIMOS consisting of compact sub-wa… ▽ More This paper investigates the utilization of triple polarization (TP) for multi-user (MU) holographic multiple-input multi-output surface (HMIMOS) wireless communication systems, targeting capacity boosting and diversity exploitation without enlarging the antenna array sizes. We specifically consider that both the transmitter and receiver are both equipped with an HMIMOS consisting of compact sub-wavelength TP patch antennas within the near-field (NF) regime. To characterize TP MU-HMIMOS systems, a TP NF channel model is constructed using the dyadic Green's function, whose characteristics are leveraged to design two precoding schemes for mitigating the cross-polarization and inter-user interference contributions. Specifically, a user-cluster-based precoding scheme assigns different users to one of three polarizations at the expense of the system's diversity, and a two-layer precoding scheme removes interference using the Gaussian elimination method at a high computational cost. The theoretical correlation analysis for HMIMOS in the NF region is also investigated, revealing that both the spacing of transmit patch antennas and user distance impact transmit correlation factors. Our numerical results show that the users far from transmitting HMIMOS experience higher correlation than those closer within the NF regime, resulting in a lower channel capacity. Meanwhile, in terms of channel capacity, TP HMIMOS can almost achieve 1.25 times gain compared with dual-polarized HMIMOS, and 3 times compared with conventional HMIMOS. In addition, the proposed two-layer precoding scheme combined with two-layer power allocation realizes a higher spectral efficiency than other schemes without sacrificing diversity. △ Less

Submitted 7 November, 2022; originally announced November 2022.

Integrated Sensing and Communications with Reconfigurable Intelligent Surfaces

Authors: Sundeep Prabhakar Chepuri, Nir Shlezinger, Fan Liu, George C. Alexandropoulos, Stefano Buzzi, Yonina C. Eldar

Abstract: Integrated sensing and communications (ISAC) are envisioned to be an integral part of future wireless networks, especially when operating at the millimeter-wave (mmWave) and terahertz (THz) frequency bands. However, establishing wireless connections at these high frequencies is quite challenging, mainly due to the penetrating pathloss that prevents reliable communication and sensing. Another emerg… ▽ More Integrated sensing and communications (ISAC) are envisioned to be an integral part of future wireless networks, especially when operating at the millimeter-wave (mmWave) and terahertz (THz) frequency bands. However, establishing wireless connections at these high frequencies is quite challenging, mainly due to the penetrating pathloss that prevents reliable communication and sensing. Another emerging technology for next-generation wireless systems is reconfigurable intelligent surfaces (RISs), which are capable of modifying harsh propagation environments. RISs are the focus of growing research and industrial attention, bringing forth the vision of smart and programmable signal propagation environments. In this article, we provide a tutorial-style overview of the applications and benefits of RISs for sensing functionalities in general, and for ISAC systems in particular. We highlight the potential advantages when fusing these two emerging technologies, and identify for the first time that: i) joint sensing and communications designs are most beneficial when the channels referring to these operations are coupled, and that ii) RISs offer means for controlling this beneficial coupling. The usefulness of RIS-aided ISAC goes beyond the individual obvious gains of each of these technologies in both performance and power efficiency. We also discuss the main signal processing challenges and future research directions which arise from the fusion of these two emerging technologies. △ Less

Submitted 2 November, 2022; originally announced November 2022.

Comments: 37 pages, 9 figures