-
Experiment-based Models for Air Time and Current Consumption of LoRaWAN LR-FHSS
Authors:
Muhammad Asad Ullah,
Konstantin Mikhaylov,
Hirley Alves
Abstract:
Long Range - Frequency Hopping Spread Spectrum (LR-FHSS) is an emerging and promising technology recently introduced into the LoRaWAN protocol specification for both terrestrial and non-terrestrial networks, notably satellites. The higher capacity, long-range and robustness to Doppler effect make LR-FHSS a primary candidate for direct-to-satellite (DtS) connectivity for enabling Internet-of-things…
▽ More
Long Range - Frequency Hopping Spread Spectrum (LR-FHSS) is an emerging and promising technology recently introduced into the LoRaWAN protocol specification for both terrestrial and non-terrestrial networks, notably satellites. The higher capacity, long-range and robustness to Doppler effect make LR-FHSS a primary candidate for direct-to-satellite (DtS) connectivity for enabling Internet-of-things (IoT) in remote areas. The LR-FHSS devices envisioned for DtS IoT will be primarily battery-powered. Therefore, it is crucial to investigate the current consumption characteristics and Time-on-Air (ToA) of LR-FHSS technology. However, to our knowledge, no prior research has presented the accurate ToA and current consumption models for this newly introduced scheme. This paper addresses this shortcoming through extensive field measurements and the development of analytical models. Specifically, we have measured the current consumption and ToA for variable transmit power, message payload, and two new LR-FHSS-based Data Rates (DR8 and DR9). We also develop current consumption and ToA analytical models demonstrating a strong correlation with the measurement results exhibiting a relative error of less than 0.3%. Thus, it confirms the validity of our models. Conversely, the existing analytical models exhibit a higher relative error rate of -9.2 to 3.4% compared to our measurement results. The presented in this paper results can be further used for simulators or in analytical studies to accurately model the on-air time and energy consumption of LR-FHSS devices.
△ Less
Submitted 19 August, 2024;
originally announced August 2024.
-
On the Spectral Efficiency of Movable and Rotary Access Points under Rician Fading
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
Multi-User Multiple-Input Multiple-Output (MU-MIMO) is a pivotal technology in present-day wireless communication systems. In such systems, a base station or Access Point (AP) is equipped with multiple antenna elements and serves multiple active devices simultaneously. Nevertheless, most of the works evaluating the performance of MU-MIMO systems consider APs with static antenna arrays, that is, wi…
▽ More
Multi-User Multiple-Input Multiple-Output (MU-MIMO) is a pivotal technology in present-day wireless communication systems. In such systems, a base station or Access Point (AP) is equipped with multiple antenna elements and serves multiple active devices simultaneously. Nevertheless, most of the works evaluating the performance of MU-MIMO systems consider APs with static antenna arrays, that is, without any movement capability. Recently, the idea of APs and antenna arrays that are able to move have gained traction among the research community. Many works evaluate the communications performance of antenna systems able to move on the horizontal plane. However, such APs require a very bulky, complex and expensive movement system. In this work, we propose a simpler and cheaper alternative: the utilization of rotary APs, i.e. APs that can rotate. We also analyze the performance of a system in which the AP is able to both move and rotate. The movements and/or rotations of the APs are computed in order to maximize the mean per-user achievable spectral efficiency, based on estimates of the locations of the active devices and using particle swarm optimization. We adopt a spatially correlated Rician fading channel model, and evaluate the resulting optimized performance of the different setups in terms of mean per-user achievable spectral efficiencies. Our numerical results show that both the optimal rotations and movements of the APs can provide substantial performance gains when the line-of-sight components of the channel vectors are strong. Moreover, the simpler rotary APs can outperform the movable APs when their movement area is constrained.
△ Less
Submitted 15 August, 2024;
originally announced August 2024.
-
Distributed MIMO Networks with Rotary ULAs for Indoor Scenarios under Rician Fading
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
The Fifth-Generation (5G) wireless communications networks introduced native support for Machine-Type Communications (MTC) use cases. Nevertheless, current 5G networks cannot fully meet the very stringent requirements regarding latency, reliability, and number of connected devices of most MTC use cases. Industry and academia have been working on the evolution from 5G to Sixth Generation (6G) netwo…
▽ More
The Fifth-Generation (5G) wireless communications networks introduced native support for Machine-Type Communications (MTC) use cases. Nevertheless, current 5G networks cannot fully meet the very stringent requirements regarding latency, reliability, and number of connected devices of most MTC use cases. Industry and academia have been working on the evolution from 5G to Sixth Generation (6G) networks. One of the main novelties is adopting Distributed Multiple-Input Multiple-Output (D-MIMO) networks. However, most works studying D-MIMO consider antenna arrays with no movement capabilities, even though some recent works have shown that this could bring substantial performance improvements. In this work, we propose the utilization of Access Points (APs) equipped with Rotary Uniform Linear Arrays (RULAs) for this purpose. Considering a spatially correlated Rician fading model, the optimal angular position of the RULAs is jointly computed by the central processing unit using particle swarm optimization as a function of the position of the active devices. Considering the impact of imperfect positioning estimates, our numerical results show that the RULAs's optimal rotation brings substantial performance gains in terms of mean per-user spectral efficiency. The improvement grows with the strength of the line-of-sight components of the channel vectors. Given the total number of antenna elements, we study the trade-off between the number of APs and the number of antenna elements per AP, revealing an optimal number of APs for the cases of APs equipped with static ULAs and RULAs.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Activity Detection for Massive Random Access using Covariance-based Matching Pursuit
Authors:
Leatile Marata,
Esa Ollila,
Hirley Alves
Abstract:
The Internet of Things paradigm heavily relies on a network of a massive number of machine-type devices (MTDs) that monitor changes in various phenomena. Consequently, MTDs are randomly activated at different times whenever a change occurs. This essentially results in relatively few MTDs being active simultaneously compared to the entire network, resembling targeted sampling in compressed sensing.…
▽ More
The Internet of Things paradigm heavily relies on a network of a massive number of machine-type devices (MTDs) that monitor changes in various phenomena. Consequently, MTDs are randomly activated at different times whenever a change occurs. This essentially results in relatively few MTDs being active simultaneously compared to the entire network, resembling targeted sampling in compressed sensing. Therefore, signal recovery in machine-type communications is addressed through joint user activity detection and channel estimation algorithms built using compressed sensing theory. However, most of these algorithms follow a two-stage procedure in which a channel is first estimated and later mapped to find active users. This approach is inefficient because the estimated channel information is subsequently discarded. To overcome this limitation, we introduce a novel covariance-learning matching pursuit algorithm that bypasses explicit channel estimation. Instead, it focuses on estimating the indices of the active users greedily. Simulation results presented in terms of probability of miss detection, exact recovery rate, and computational complexity validate the proposed technique's superior performance and efficiency.
△ Less
Submitted 4 May, 2024;
originally announced May 2024.
-
On the Spectral Efficiency of Indoor Wireless Networks with a Rotary Uniform Linear Array
Authors:
Eduardo Noboro Tominaga,
Onel Luis Alcaraz López,
Tommy Svensson,
Richard Demo Souza,
Hirley Alves
Abstract:
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained…
▽ More
Contemporary wireless communication systems rely on Multi-User Multiple-Input Multiple-Output (MU-MIMO) techniques. In such systems, each Access Point (AP) is equipped with multiple antenna elements and serves multiple devices simultaneously. Notably, traditional systems utilize fixed antennas, i.e., antennas without any movement capabilities, while the idea of movable antennas has recently gained traction among the research community. By moving in a confined region, movable antennas are able to exploit the wireless channel variation in the continuous domain. This additional degree of freedom may enhance the quality of the wireless links, and consequently the communication performance. However, movable antennas for MU-MIMO proposed in the literature are complex, bulky, expensive and present a high power consumption. In this paper, we propose an alternative to such systems that has lower complexity and lower cost. More specifically, we propose the incorporation of rotation capabilities to APs equipped with Uniform Linear Arrays (ULAs) of antennas. We consider the uplink of an indoor scenario where the AP serves multiple devices simultaneously. The optimal rotation of the ULA is computed based on estimates of the positions of the active devices and aiming at maximizing the per-user mean achievable Spectral Efficiency (SE). Adopting a spatially correlated Rician channel model, our numerical results show that the rotation capabilities of the AP can bring substantial improvements in the SE in scenarios where the line-of-sight component of the channel vectors is strong. Moreover, our proposed system is robust against imperfect positioning estimates.
△ Less
Submitted 25 June, 2024; v1 submitted 8 February, 2024;
originally announced February 2024.
-
Energy-Efficient Analog Beamforming for RF-WET with Charging Time Constraint
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves
Abstract:
Internet of Things (IoT) sustainability may hinge on radio frequency wireless energy transfer (RF-WET). However, energy-efficient charging strategies are still needed, motivating our work. Specifically, this letter proposes a time division scheme to efficiently charge low-power devices in an IoT network. For this, a multi-antenna power beacon (PB) drives the devices' energy harvesting circuit to t…
▽ More
Internet of Things (IoT) sustainability may hinge on radio frequency wireless energy transfer (RF-WET). However, energy-efficient charging strategies are still needed, motivating our work. Specifically, this letter proposes a time division scheme to efficiently charge low-power devices in an IoT network. For this, a multi-antenna power beacon (PB) drives the devices' energy harvesting circuit to the highest power conversion efficiency point via energy beamforming, thus achieving minimum energy consumption. Herein, we adopt the analog multi-antenna architecture due to its low complexity, cost, and energy consumption. The proposal includes a simple yet accurate model for the transfer characteristic of the energy harvesting circuit, enabling the optimization framework. The results evince the effectiveness of our RF-WET strategy over a benchmark scheme where the PB charges all the IoT devices simultaneously. Furthermore, the performance increases with the number of PB antennas.
△ Less
Submitted 20 March, 2024; v1 submitted 9 November, 2023;
originally announced November 2023.
-
Trade-Off Between Beamforming and Macro-Diversity Gains in Distributed mMIMO
Authors:
Eduardo Noboro Tominaga,
Hsuan-Jung Su,
Jinfeng Du,
Sivarama Venkatesan,
Richard Demo Souza,
Hirley Alves
Abstract:
Industry and academia have been working towards the evolution from Centralized massive Multiple-Input Multiple-Output (CmMIMO) to Distributed mMIMO (DmMIMO) architectures. Instead of splitting a coverage area into many cells, each served by a single Base Station equipped with several antennas, the whole coverage area is jointly covered by several Access Points (AP) equipped with few or single ante…
▽ More
Industry and academia have been working towards the evolution from Centralized massive Multiple-Input Multiple-Output (CmMIMO) to Distributed mMIMO (DmMIMO) architectures. Instead of splitting a coverage area into many cells, each served by a single Base Station equipped with several antennas, the whole coverage area is jointly covered by several Access Points (AP) equipped with few or single antennas. Nevertheless, when choosing between deploying more APs with few or single antennas or fewer APs equipped with many antennas, one observes an inherent trade-off between the beamforming and macro-diversity gains that has not been investigated in the literature. Given a total number of antenna elements and total downlink power, under a channel model that takes into account a probability of Line-of-Sight (LoS) as a function of the distance between the User Equipments (UEs) and APs, our numerical results show that there exists a ``sweet spot" on the optimal number of APs and of antenna elements per AP which is a function of the physical dimensions of the coverage area.
△ Less
Submitted 10 September, 2023;
originally announced September 2023.
-
Sustainable RF Wireless Energy Transfer for Massive IoT: enablers and challenges
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves,
Matti Latva-aho
Abstract:
Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which c…
▽ More
Reliable energy supply remains a crucial challenge in the Internet of Things (IoT). Although relying on batteries is cost-effective for a few devices, it is neither a scalable nor a sustainable charging solution as the network grows massive. Besides, current energy-saving technologies alone cannot cope, for instance, with the vision of zero-energy devices and the deploy-and-forget paradigm which can unlock a myriad of new use cases. In this context, sustainable radio frequency wireless energy transfer emerges as an attractive solution for efficiently charging the next generation of ultra low power IoT devices. Herein, we highlight that sustainable charging is broader than conventional green charging, as it focuses on balancing economy prosperity and social equity in addition to environmental health. We discuss the economic implications of powering energy transmitters with ambient energy sources, and reveal insights on their optimal deployment. Moreover, we overview different methods for modeling the energy arrival process of ambient energy sources and discuss their application in different use cases. We highlight the potential of integrating sustainable WET with energy harvesting from nearby transmitters and discuss enhancements in energy receiver design. We also illustrate the role of different technologies in enabling sustainable WET and exemplify various use cases. Besides, we reveal insights into low-complexity architectures designed at the energy transmitters. We highlight relevant research challenges and candidate solutions.
△ Less
Submitted 9 November, 2023; v1 submitted 26 June, 2023;
originally announced June 2023.
-
Meta-Learning Based Few Pilots Demodulation and Interference Cancellation For NOMA Uplink
Authors:
Hebatalla Issa,
Mohammad Shehab,
Hirley Alves
Abstract:
Non-Orthogonal Multiple Access (NOMA) is at the heart of a paradigm shift towards non-orthogonal communication due to its potential to scale well in massive deployments. Nevertheless, the overhead of channel estimation remains a key challenge in such scenarios. This paper introduces a data-driven, meta-learning-aided NOMA uplink model that minimizes the channel estimation overhead and does not req…
▽ More
Non-Orthogonal Multiple Access (NOMA) is at the heart of a paradigm shift towards non-orthogonal communication due to its potential to scale well in massive deployments. Nevertheless, the overhead of channel estimation remains a key challenge in such scenarios. This paper introduces a data-driven, meta-learning-aided NOMA uplink model that minimizes the channel estimation overhead and does not require perfect channel knowledge. Unlike conventional deep learning successive interference cancellation (SICNet), Meta-Learning aided SIC (meta-SICNet) is able to share experience across different devices, facilitating learning for new incoming devices while reducing training overhead. Our results confirm that meta-SICNet outperforms classical SIC and conventional SICNet as it can achieve a lower symbol error rate with fewer pilots.
△ Less
Submitted 9 June, 2023;
originally announced June 2023.
-
Joint Activity Detection and Channel Estimation for Clustered Massive Machine Type Communications
Authors:
Leatile Marata,
Onel Luis Alcaraz López,
Andreas Hauptmann,
Hamza Djelouat,
Hirley Alves
Abstract:
Compressed sensing multi-user detection (CS-MUD) algorithms play a key role in optimizing grant-free (GF) non-orthogonal multiple access (NOMA) for massive machine-type communications (mMTC). However, current CS-MUD algorithms cannot be efficiently parallelized, leading to computationally expensive implementations of joint activity detection and channel estimation (JADCE) as the number of deployed…
▽ More
Compressed sensing multi-user detection (CS-MUD) algorithms play a key role in optimizing grant-free (GF) non-orthogonal multiple access (NOMA) for massive machine-type communications (mMTC). However, current CS-MUD algorithms cannot be efficiently parallelized, leading to computationally expensive implementations of joint activity detection and channel estimation (JADCE) as the number of deployed machine-type devices (MTDs) increases. To address this, the present work proposes novel JADCE algorithms that can be applied in parallel for different clusters of MTDs by exploiting the structure of the pilot sequences. These are the approximation error method (AEM)-alternating direction method of multipliers (ADMM), and AEM-sparse Bayesian learning (SBL). Results presented in terms of the normalized mean square error and the probability of miss detection show comparable performance to the conventional algorithms. However, both AEM-ADMM and AEM-SBL algorithms have significantly reduced computational complexity and run times, thus, facilitating network scalability.
△ Less
Submitted 3 October, 2023; v1 submitted 4 May, 2023;
originally announced May 2023.
-
Performance Analysis of Centralized and Distributed Massive MIMO for MTC
Authors:
Eduardo Noboro Tominaga,
Onel Luiz Alcaraz López,
Hirley Alves,
Richard Demo Souza,
Leonardo Terças
Abstract:
Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and ac…
▽ More
Massive Multiple-Input Multiple-Output (mMIMO) is one of the essential technologies introduced by the Fifth Generation (5G) of wireless communication systems. However, although mMIMO provides many benefits for wireless communications, it cannot ensure uniform wireless coverage and suffers from inter-cell interference inherent to the traditional cellular network paradigm. Therefore, industry and academia are working on the evolution from conventional Centralized mMIMO (CmMIMO) to Distributed mMIMO (DmMIMO) architectures for the Sixth Generation (6G) of wireless networks. Under this new paradigm, several Access Points (APs) are distributed in the coverage area, and all jointly cooperate to serve the active devices. Aiming at Machine-Type Communication (MTC) use cases, we compare the performance of CmMIMO and different DmMIMO deployments in an indoor industrial scenario considering regular and alarm traffic patterns for MTC. Our simulation results show that DmMIMO's performance is often superior to CmMIMO. However, the traditional CmMIMO can outperform DmMIMO when the devices' channels are highly correlated.
△ Less
Submitted 11 April, 2023;
originally announced April 2023.
-
Multi-UAV Path Learning for Age and Power Optimization in IoT with UAV Battery Recharge
Authors:
Eslam Eldeeb,
Jean Michel de Souza Sant'Ana,
Dian Echevarría Pérez,
Mohammad Shehab,
Nurul Huda Mahmood,
Hirley Alves
Abstract:
In many emerging Internet of Things (IoT) applications, the freshness of the is an important design criterion. Age of Information (AoI) quantifies the freshness of the received information or status update. This work considers a setup of deployed IoT devices in an IoT network; multiple unmanned aerial vehicles (UAVs) serve as mobile relay nodes between the sensors and the base station. We formulat…
▽ More
In many emerging Internet of Things (IoT) applications, the freshness of the is an important design criterion. Age of Information (AoI) quantifies the freshness of the received information or status update. This work considers a setup of deployed IoT devices in an IoT network; multiple unmanned aerial vehicles (UAVs) serve as mobile relay nodes between the sensors and the base station. We formulate an optimization problem to jointly plan the UAVs' trajectory, while minimizing the AoI of the received messages and the devices' energy consumption. The solution accounts for the UAVs' battery lifetime and flight time to recharging depots to ensure the UAVs' green operation. The complex optimization problem is efficiently solved using a deep reinforcement learning algorithm. In particular, we propose a deep Q-network, which works as a function approximation to estimate the state-action value function. The proposed scheme is quick to converge and results in a lower ergodic age and ergodic energy consumption when compared with benchmark algorithms such as greedy algorithm (GA), nearest neighbour (NN), and random-walk (RW).
△ Less
Submitted 9 January, 2023;
originally announced January 2023.
-
Joint Coherent and Non-Coherent Detection and Decoding Techniques for Heterogeneous Networks
Authors:
Leatile Marata,
Onel Luis Alcaraz López,
Hamza Djelouat,
Markus Leinonen,
Hirley Alves,
Markku Juntti
Abstract:
Cellular networks that are traditionally designed for human-type communication (HTC) have the potential to provide cost effective connectivity to machine-type communication (MTC). However, MTC is characterized by unprecedented traffic in cellular networks, thus posing a challenge to its successful incorporation. In this work, we propose a unified framework for amicable coexistence of MTC and HTC.…
▽ More
Cellular networks that are traditionally designed for human-type communication (HTC) have the potential to provide cost effective connectivity to machine-type communication (MTC). However, MTC is characterized by unprecedented traffic in cellular networks, thus posing a challenge to its successful incorporation. In this work, we propose a unified framework for amicable coexistence of MTC and HTC. We consider a heterogeneous network where machine-type devices coexist with enhanced mobile broadband (eMBB) devices and propose transceiver techniques that promote efficient signal recovery from these devices. For this, we present an eMBB pilot and MTC data generation strategy that facilitates joint coherent decoding of eMBB data and non-coherent decoding of MTC data. Furthermore, we assess the feasibility of coexistence using receiver operating characteristics, outage probability, and normalized mean square error (NMSE). Our numerical results reveal that a harmonious coexistence of the heterogeneous services can be achieved with properly configured average signal-to-noise ratios and pilot length.
△ Less
Submitted 27 September, 2022;
originally announced September 2022.
-
Energy-Efficient Wake-Up Signalling for Machine-Type Devices Based on Traffic-Aware Long-Short Term Memory Prediction
Authors:
David E. Ruíz-Guirola,
Carlos A. Rodríguez-López,
Samuel Montejo-Sánchez,
Richard Demo Souza,
Onel L. A. López,
Hirley Alves
Abstract:
Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt…
▽ More
Reducing energy consumption is a pressing issue in low-power machine-type communication (MTC) networks. In this regard, the Wake-up Signal (WuS) technology, which aims to minimize the energy consumed by the radio interface of the machine-type devices (MTDs), stands as a promising solution. However, state-of-the-art WuS mechanisms use static operational parameters, so they cannot efficiently adapt to the system dynamics. To overcome this, we design a simple but efficient neural network to predict MTC traffic patterns and configure WuS accordingly. Our proposed forecasting WuS (FWuS) leverages an accurate long-short term memory (LSTM)- based traffic prediction that allows extending the sleep time of MTDs by avoiding frequent page monitoring occasions in idle state. Simulation results show the effectiveness of our approach. The traffic prediction errors are shown to be below 4%, being false alarm and miss-detection probabilities respectively below 8.8% and 1.3%. In terms of energy consumption reduction, FWuS can outperform the best benchmark mechanism in up to 32%. Finally, we certify the ability of FWuS to dynamically adapt to traffic density changes, promoting low-power MTC scalability
△ Less
Submitted 13 June, 2022;
originally announced June 2022.
-
Statistical Analysis of Received Signal Strength in Industrial IoT Distributed Massive MIMO Systems
Authors:
Eduardo Noboro Tominaga,
Onel Luiz Alcaraz López,
Richard Demo Souza,
Hirley Alves
Abstract:
The Fifth Generation (5G) of wireless networks introduced native support for Machine-Type Communication (MTC), which is a key enabler for the Internet of Things (IoT) revolution. Current 5G standards are not yet capable of fully satisfying the requirements of critical MTC (cMTC) and massive MTC (mMTC) use cases. This is the main reason why industry and academia have already started working on tech…
▽ More
The Fifth Generation (5G) of wireless networks introduced native support for Machine-Type Communication (MTC), which is a key enabler for the Internet of Things (IoT) revolution. Current 5G standards are not yet capable of fully satisfying the requirements of critical MTC (cMTC) and massive MTC (mMTC) use cases. This is the main reason why industry and academia have already started working on technical solutions for beyond-5G and Sixth Generation (6G) networks. One technological solution that has been extensively studied is the combination of network densification, massive Multiple-Input Multiple-Output (mMIMO) systems and user-centric design, which is known as distributed mMIMO or Cell-Free (CF) mMIMO. Under this new paradigm, there are no longer cell boundaries: all the Access Points (APs) on the network cooperate to jointly serve all the devices. In this paper, we compare the performance of traditional mMIMO and different distributed mMIMO setups, and quantify the macro diversity and signal spatial diversity performance they provide. Aiming at the uplink in industrial indoor scenarios, we adopt a path loss model based on real measurement campaigns. Monte Carlo simulation results show that the grid deployment of APs provide higher average channel gains, but radio stripes deployments provide lower variability of the received signal strength.
△ Less
Submitted 2 May, 2022;
originally announced May 2022.
-
User Activity Detection and Channel Estimation of Spatially Correlated Channels via AMP in Massive MTC
Authors:
Hamza Djelouat,
Leatile Marata,
Markus Leinonen,
Hirley Alves,
Markku Juntti
Abstract:
This paper addresses the problem of joint user identification and channel estimation (JUICE) for grant-free access in massive machine-type communications (mMTC). We consider the JUICE under a spatially correlated fading channel model as that reflects the main characteristics of the practical multiple-input multiple-output channels. We formulate the JUICE as a sparse recovery problem in a multiple…
▽ More
This paper addresses the problem of joint user identification and channel estimation (JUICE) for grant-free access in massive machine-type communications (mMTC). We consider the JUICE under a spatially correlated fading channel model as that reflects the main characteristics of the practical multiple-input multiple-output channels. We formulate the JUICE as a sparse recovery problem in a multiple measurement vector setup and present a solution based on the approximate message passing (AMP) algorithm that takes into account the channel spatial correlation. Using the state evolution, we provide a detailed theoretical analysis on the activity detection performance of AMP-based JUICE by deriving closed-from expressions for the probabilities of miss detection and false alarm. The simulation experiments show that the performance predicted by the theoretical analysis matches the one obtained by the numerical results.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
Massive Wireless Energy Transfer with Multiple Power Beacons for very large Internet of Things
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves,
Richard D. Souza,
Samuel Montejo-Sánchez
Abstract:
The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering…
▽ More
The Internet of Things (IoT) comprises an increasing number of low-power and low-cost devices that autonomously interact with the surrounding environment. As a consequence of their popularity, future IoT deployments will be massive, which demands energy-efficient systems to extend their lifetime and improve the user experience. Radio frequency wireless energy transfer has the potential of powering massive IoT networks, thus eliminating the need for frequent battery replacement by using the so-called power beacons (PBs). In this paper, we provide a framework for minimizing the sum transmit power of the PBs using devices' positions information and their current battery state. Our strategy aims to reduce the PBs' power consumption and to mitigate the possible impact of the electromagnetic radiation on human health. We also present analytical insights for the case of very distant clusters and evaluate their applicability. Numerical results show that our proposed framework reduces the outage probability as the number of PBs and/or the energy demands increase.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Massive Wireless Energy Transfer with Statistical CSI Beamforming
Authors:
Francisco A. Monteiro,
Onel L. A. López,
Hirley Alves
Abstract:
Wireless energy transfer (WET) is a promising solution to enable massive machine-type communications (mMTC) with low-complexity and low-powered wireless devices. Given the energy restrictions of the devices, instant channel state information at the transmitter (CSIT) is not expected to be available in practical WET-enabled mMTC. However, because it is common that the terminals appear spatially clu…
▽ More
Wireless energy transfer (WET) is a promising solution to enable massive machine-type communications (mMTC) with low-complexity and low-powered wireless devices. Given the energy restrictions of the devices, instant channel state information at the transmitter (CSIT) is not expected to be available in practical WET-enabled mMTC. However, because it is common that the terminals appear spatially clustered, some degree of spatial correlation between their channels to the base station (BS) is expected to occur. The paper considers a massive antenna array at the BS for WET that only has access to i) the first and second order statistics of the Rician channel component of the multiple-input multiple-output (MIMO) channel and also to ii) the line-of-sight MIMO component. The optimal precoding scheme that maximizes the total energy available to the single-antenna devices is derived considering a continuous alphabet for the precoders, permitting any modulated or deterministic waveform. This may lead to some devices in the clusters being assigned a low fraction of the total available power in the cluster, creating a rather uneven situation among them. Consequently, a fairness criterion is introduced, imposing a minimum amount of power allocated to the terminals. A piece-wise linear harvesting circuit is considered at the terminals, with both saturation and a minimum sensitivity, and a constrained version of the precoder is also proposed by solving a non-linear programming problem. A paramount benefit of the constrained precoder is the encompassment of fairness in the power allocation to the different clusters. Moreover, given the polynomial complexity increase of the proposed unconstrained precoder, and the observed linear gain of the system's available sum-power with an increasing number of antennas at the ULA, the use of massive antenna arrays is desirable.
△ Less
Submitted 11 July, 2021; v1 submitted 15 June, 2021;
originally announced June 2021.
-
Joint Channel Estimation and Device Activity Detection in Heterogeneous Networks
Authors:
Leatile Marata,
Onel Luis Alcaraz López,
Eduardo Noboro Tominaga,
Hirley Alves
Abstract:
Internet of Things (IoT) has triggered a rapid increase in the number of connected devices and new use cases of wireless communications. To meet the new demands, the fifth generation (5G) of wireless communication systems features native machine type communication (MTC) services in addition to traditional human type communication (HTC) services. Some of the main challenges are the heterogeneous re…
▽ More
Internet of Things (IoT) has triggered a rapid increase in the number of connected devices and new use cases of wireless communications. To meet the new demands, the fifth generation (5G) of wireless communication systems features native machine type communication (MTC) services in addition to traditional human type communication (HTC) services. Some of the main challenges are the heterogeneous requirements and the sporadic traffic of massive MTC (mMTC), which makes the orthogonal allocation of resources infeasible. To overcome this problem, grant free non-orthogonal multiple access schemes have been proposed alongside with sparse signal recovery algorithms. While most of the related works have considered only homogeneous networks, we focus on a scenario where an enhanced mobile broadband (eMBB) device and multiple MTC devices share the same radio resources. We exploit the approximate message passing (AMP) algorithm for joint device activity detection and channel estimation of MTC devices in the presence of interference from eMBB, and evaluate the system performance in terms of receiver operating characteristics (ROC) and channel estimation errors. Moreover, we also propose two new pilot sequence generation strategies which improve the detection capabilities of the MTC receiver without affecting the eMBB service.
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
On the SIR Meta Distribution in Massive MTCNetworks with Scheduling and Data Aggregation
Authors:
Nelson J. Mayedo Rodríguez,
Onel L. Alcaraz López,
Hirley Alves,
Matti Latva-aho
Abstract:
Data aggregation is an efficient approach to handle the congestion introduced by a massive number of machine type devices (MTDs). The aggregators not only collect data but also implement scheduling mechanisms to cope with scarce network resources. We use the concept of meta distribution (MD) of the signal-to-interference ratio (SIR) to gain a complete understanding of the per-link reliability and…
▽ More
Data aggregation is an efficient approach to handle the congestion introduced by a massive number of machine type devices (MTDs). The aggregators not only collect data but also implement scheduling mechanisms to cope with scarce network resources. We use the concept of meta distribution (MD) of the signal-to-interference ratio (SIR) to gain a complete understanding of the per-link reliability and describe the performance of two scheduling methods for data aggregation of machine type communication (MTC): random resource scheduling (RRS) and channel-aware resource scheduling (CRS). The results show the fraction of users in the network that achieves a target reliability, which is an important aspect to consider when designing wireless systems with stringent service requirements.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
Network Slicing for eMBB and mMTC with NOMA and Space Diversity Reception
Authors:
Eduardo Noboro Tominaga,
Hirley Alves,
Onel Luiz Alcaraz López,
Richard Demo Souza,
João Luiz Rebelatto,
Matti Latva-Aho
Abstract:
In this work we study the coexistence in the same Radio Access Network (RAN) of two generic services present in the Fifth Generation (5G) of wireless communication systems: enhanced Mobile BroadBand (eMBB) and massive Machine-Type Communications (mMTC). eMBB services are requested for applications that demand extremely high data rates and moderate requirements on latency and reliability, whereas m…
▽ More
In this work we study the coexistence in the same Radio Access Network (RAN) of two generic services present in the Fifth Generation (5G) of wireless communication systems: enhanced Mobile BroadBand (eMBB) and massive Machine-Type Communications (mMTC). eMBB services are requested for applications that demand extremely high data rates and moderate requirements on latency and reliability, whereas mMTC enables applications for connecting a massive number of low-power and low-complexity devices. The coexistence of both services is enabled by means of network slicing and Non-Orthogonal Multiple Access (NOMA) with Successive Interference Cancellation (SIC) decoding. Under the orthogonal slicing, the radio resources are exclusively allocated to each service, while in the non-orthogonal slicing the traffics from both services overlap in the same radio resources. We evaluate the uplink performance of both services in a scenario with a multi-antenna Base Station (BS). Our simulation results show that the performance gains obtained through multiple receive antennas are more accentuated for the non-orthogonal slicing than for the orthogonal allocation of resources, such that the non-orthogonal slicing outperforms its orthogonal counterpart in terms of achievable data rates or number of connected devices as the number of receive antennas increases.
△ Less
Submitted 13 January, 2021;
originally announced January 2021.
-
Non-Orthogonal Multiple Access and Network Slicing: Scalable Coexistence of eMBB and URLLC
Authors:
Eduardo Noboro Tominaga,
Hirley Alves,
Richard Demo Souza,
João Luiz Rebelatto,
Matti Latva-Aho
Abstract:
The 5G systems will feature three generic services: enhanced Mobile BroadBand (eMBB), massive Machine-Type Communications (mMTC) and Ultra-Reliable and Low-Latency Communications (URLLC). The diverse requirements of these services in terms of data-rates, number of connected devices, latency and reliability can lead to a sub-optimal use of the 5G network, thus network slicing is proposed as a solut…
▽ More
The 5G systems will feature three generic services: enhanced Mobile BroadBand (eMBB), massive Machine-Type Communications (mMTC) and Ultra-Reliable and Low-Latency Communications (URLLC). The diverse requirements of these services in terms of data-rates, number of connected devices, latency and reliability can lead to a sub-optimal use of the 5G network, thus network slicing is proposed as a solution that creates customized slices of the network specifically designed to meet the requirements of each service. Under the network slicing, the radio resources can be shared in orthogonal and non-orthogonal schemes. Motivated by Industrial Internet of Things (IIoT) scenarios where a large number of sensors may require connectivity with stringent requirements of latency and reliability, we propose the use of Non-Orthogonal Multiple Access (NOMA) to improve the number of URLLC users that are connected in the uplink to the same base station (BS), for both orthogonal and non-orthogonal network slicing with eMBB users. The multiple URLLC users transmit simultaneously and across multiple frequency channels. We set the reliability requirements for the two services and analyze their pair of sum rates. We show that, even with overlapping transmissions from multiple eMBB and URLLC users, the use of NOMA techniques allows us to guarantee the reliability requirements for both services.
△ Less
Submitted 12 January, 2021;
originally announced January 2021.
-
On the Optimal Deployment of Power Beacons for Massive Wireless Energy Transfer
Authors:
Osmel Martínez Rosabal,
Onel L. Alcaraz López,
Hirley Alves,
Samuel Montejo-Sánchez,
Matti Latva-aho
Abstract:
Wireless energy transfer (WET) is emerging as an enabling green technology for Internet of Things (IoT) networks. WET allows the IoT devices to wirelessly recharge their batteries with energy from external sources such as dedicated radio frequency transmitters called power beacons (PBs). In this paper, we investigate the optimal deployment of PBs that guarantees a network-wide energy outage constr…
▽ More
Wireless energy transfer (WET) is emerging as an enabling green technology for Internet of Things (IoT) networks. WET allows the IoT devices to wirelessly recharge their batteries with energy from external sources such as dedicated radio frequency transmitters called power beacons (PBs). In this paper, we investigate the optimal deployment of PBs that guarantees a network-wide energy outage constraint. Optimal positions for the PBs are determined by maximizing the average incident power for the worst location in the service area since no information about the sensor deployment is provided. Such network planning guarantees the fairest harvesting performance for all the IoT devices. Numerical simulations evidence that our proposed optimization framework improves the energy supply reliability compared to benchmark schemes. Additionally, we show that although both, the number of deployed PBs and the number of antennas per PB, introduce performance improvements, the former has a dominant role. Finally, our proposal allows to extend the coverage area while keeping the total power budget fixed, which additionally reduces the level of electromagnetic radiation in the vicinity of PBs.
△ Less
Submitted 4 March, 2021; v1 submitted 8 December, 2020;
originally announced December 2020.
-
LoRa Performance Analysis with Superposed Signal Decoding
Authors:
J. M. de Souza Sant'Ana,
A. Hoeller,
R. D. Souza,
H. Alves,
S. Montejo-Sánchez
Abstract:
This paper considers the use of successive interference cancellation (SIC) to decode superposed signals in Long Range (LoRa) networks. We build over a known stochastic geometry model for LoRa networks and include the effect of recovering colliding packets through SIC. We derive closed-form expressions for the successful decoding of packets using SIC taking path loss, fading, noise, and interferenc…
▽ More
This paper considers the use of successive interference cancellation (SIC) to decode superposed signals in Long Range (LoRa) networks. We build over a known stochastic geometry model for LoRa networks and include the effect of recovering colliding packets through SIC. We derive closed-form expressions for the successful decoding of packets using SIC taking path loss, fading, noise, and interference into account, while we validate the model by means of Monte Carlo simulations. Results show that SIC-enabled LoRa networks improve worst-case reliability by up to 34%. We show that, for at least one test scenario, SIC increases by 159% the number of served users with the same worst-case reliability level.
△ Less
Submitted 19 October, 2020;
originally announced October 2020.
-
Traffic Prediction Based Fast Uplink Grant for Massive IoT
Authors:
Mohammad Shehab,
Alexander K. Hagelskjær,
Anders E. Kalør,
Petar Popovski,
Hirley Alves
Abstract:
This paper presents a novel framework for traffic prediction of IoT devices activated by binary Markovian events. First, we consider a massive set of IoT devices whose activation events are modeled by an On-Off Markov process with known transition probabilities. Next, we exploit the temporal correlation of the traffic events and apply the forward algorithm in the context of hidden Markov models (H…
▽ More
This paper presents a novel framework for traffic prediction of IoT devices activated by binary Markovian events. First, we consider a massive set of IoT devices whose activation events are modeled by an On-Off Markov process with known transition probabilities. Next, we exploit the temporal correlation of the traffic events and apply the forward algorithm in the context of hidden Markov models (HMM) in order to predict the activation likelihood of each IoT device. Finally, we apply the fast uplink grant scheme in order to allocate resources to the IoT devices that have the maximal likelihood for transmission. In order to evaluate the performance of the proposed scheme, we define the regret metric as the number of missed resource allocation opportunities. The proposed fast uplink scheme based on traffic prediction outperforms both conventional random access and time division duplex in terms of regret and efficiency of system usage, while it maintains its superiority over random access in terms of average age of information for massive deployments.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
White Paper on Critical and Massive Machine Type Communication Towards 6G
Authors:
Nurul Huda Mahmood,
Stefan Böcker,
Andrea Munari,
Federico Clazzer,
Ingrid Moerman,
Konstantin Mikhaylov,
Onel Lopez,
Ok-Sun Park,
Eric Mercier,
Hannes Bartz,
Riku Jäntti,
Ravikumar Pragada,
Yihua Ma,
Elina Annanperä,
Christian Wietfeld,
Martin Andraud,
Gianluigi Liva,
Yan Chen,
Eduardo Garro,
Frank Burkhardt,
Hirley Alves,
Chen-Feng Liu,
Yalcin Sadi,
Jean-Baptiste Dore,
Eunah Kim
, et al. (6 additional authors not shown)
Abstract:
The society as a whole, and many vertical sectors in particular, is becoming increasingly digitalized. Machine Type Communication (MTC), encompassing its massive and critical aspects, and ubiquitous wireless connectivity are among the main enablers of such digitization at large. The recently introduced 5G New Radio is natively designed to support both aspects of MTC to promote the digital transfor…
▽ More
The society as a whole, and many vertical sectors in particular, is becoming increasingly digitalized. Machine Type Communication (MTC), encompassing its massive and critical aspects, and ubiquitous wireless connectivity are among the main enablers of such digitization at large. The recently introduced 5G New Radio is natively designed to support both aspects of MTC to promote the digital transformation of the society. However, it is evident that some of the more demanding requirements cannot be fully supported by 5G networks. Alongside, further development of the society towards 2030 will give rise to new and more stringent requirements on wireless connectivity in general, and MTC in particular. Driven by the societal trends towards 2030, the next generation (6G) will be an agile and efficient convergent network serving a set of diverse service classes and a wide range of key performance indicators (KPI). This white paper explores the main drivers and requirements of an MTC-optimized 6G network, and discusses the following six key research questions:
- Will the main KPIs of 5G continue to be the dominant KPIs in 6G; or will there emerge new key metrics?
- How to deliver different E2E service mandates with different KPI requirements considering joint-optimization at the physical up to the application layer?
- What are the key enablers towards designing ultra-low power receivers and highly efficient sleep modes?
- How to tackle a disruptive rather than incremental joint design of a massively scalable waveform and medium access policy for global MTC connectivity?
- How to support new service classes characterizing mission-critical and dependable MTC in 6G?
- What are the potential enablers of long term, lightweight and flexible privacy and security schemes considering MTC device requirements?
△ Less
Submitted 4 May, 2020; v1 submitted 29 April, 2020;
originally announced April 2020.
-
Three-layer Approach to Detect Anomalies in Industrial Environments based on Machine Learning
Authors:
Daniel Gutierrez-Rojas,
Mehar Ullah,
Ioannis T. Christou,
Gustavo Almeida,
Pedro H. J. Nardelli,
Dick Carrillo,
Jean M. Sant'Ana,
Hirley Alves,
Merim Dzaferagic,
Alessandro Chiumento,
Charalampos Kalalas
Abstract:
This paper introduces a general approach to design a tailored solution to detect rare events in different industrial applications based on Internet of Things (IoT) networks and machine learning algorithms. We propose a general framework based on three layers (physical, data and decision) that defines the possible designing options so that the rare events/anomalies can be detected ultra-reliably. T…
▽ More
This paper introduces a general approach to design a tailored solution to detect rare events in different industrial applications based on Internet of Things (IoT) networks and machine learning algorithms. We propose a general framework based on three layers (physical, data and decision) that defines the possible designing options so that the rare events/anomalies can be detected ultra-reliably. This general framework is then applied in a well-known benchmark scenario, namely Tennessee Eastman Process. We then analyze this benchmark under three threads related to data processes: acquisition, fusion and analytics. Our numerical results indicate that: (i) event-driven data acquisition can significantly decrease the number of samples while filtering measurement noise, (ii) mutual information data fusion method can significantly decrease the variable spaces and (iii) quantitative association rule mining method for data analytics is effective for the rare event detection, identification and diagnosis. These results indicates the benefits of an integrated solution that jointly considers the different levels of data processing following the proposed general three layer framework, including details of the communication network and computing platform to be employed.
△ Less
Submitted 20 April, 2020;
originally announced April 2020.
-
Beyond 5G Low-Power Wide-Area Networks: A LoRaWAN Suitability Study
Authors:
Arliones Hoeller,
Jean Sant'Ana,
Juho Markkula,
Konstantin Mikhaylov,
Richard Souza,
Hirley Alves
Abstract:
In this paper, we deliver a discussion regarding the role of Low-Power Wide-Area Networks (LPWAN) in the cellular Internet-of-Things (IoT) infrastructure to support massive Machine-Type Communications (mMTC) in next-generation wireless systems beyond 5G. We commence by presenting a performance analysis of current LPWAN systems, specifically LoRaWAN, in terms of coverage and throughput. The results…
▽ More
In this paper, we deliver a discussion regarding the role of Low-Power Wide-Area Networks (LPWAN) in the cellular Internet-of-Things (IoT) infrastructure to support massive Machine-Type Communications (mMTC) in next-generation wireless systems beyond 5G. We commence by presenting a performance analysis of current LPWAN systems, specifically LoRaWAN, in terms of coverage and throughput. The results obtained using analytic methods and network simulations are combined in the paper for getting a more comprehensive vision. Next, we identify possible performance bottlenecks, speculate on the characteristics of coming IoT applications, and seek to identify potential enhancements to the current technologies that may overcome the identified shortcomings.
△ Less
Submitted 19 February, 2020;
originally announced February 2020.
-
Performance Analysis of Single-Cell Adaptive Data Rate-Enabled LoRaWAN
Authors:
Arliones Hoeller,
Richard Demo Souza,
Samuel Montejo-Sánchez,
Hirley Alves
Abstract:
LoRaWAN enables massive connectivity for Internet-of-Things applications. Many published works employ stochastic geometry to derive outage models of LoRaWAN over fading channels assuming fixed transmit power and distance-based spreading factor (SF) allocation. However, in practice, LoRaWAN employs the Adaptive Data Rate (ADR) mechanism, which dynamically adjusts SF and transmit power of nodes base…
▽ More
LoRaWAN enables massive connectivity for Internet-of-Things applications. Many published works employ stochastic geometry to derive outage models of LoRaWAN over fading channels assuming fixed transmit power and distance-based spreading factor (SF) allocation. However, in practice, LoRaWAN employs the Adaptive Data Rate (ADR) mechanism, which dynamically adjusts SF and transmit power of nodes based on channel state. The community addressed the performance of ADR using simulations, but analytical models have not been introduced. In this letter, we seek to close this gap. We build over an analytical LoRaWAN model to consider the performance of steady-state ADR-enabled LoRaWAN. We derive outage expressions and an optimization procedure to maximize the number of users under reliability constraints. Results show that power allocation reduces interference and improves network capacity while reducing average power.
△ Less
Submitted 19 February, 2020;
originally announced February 2020.
-
On CSI-free Multi-Antenna Schemes for Massive RF Wireless Energy Transfer
Authors:
Onel L. A. López,
Samuel Montejo-Sánchez,
Richard D. Souza,
Hirley Alves,
Constantinos B. Papadias
Abstract:
Wireless Energy Transfer (WET) is emerging as a potential green enabler for massive Internet of Things (IoT). Herein, we analyze Channel State Information (CSI)-free multi-antenna strategies for powering wirelessly a large set of single-antenna IoT devices. The CSI-free schemes are AA-SS (AA-IS), where all antennas transmit the same (independent) signal(s), and SA, where just one antenna transmits…
▽ More
Wireless Energy Transfer (WET) is emerging as a potential green enabler for massive Internet of Things (IoT). Herein, we analyze Channel State Information (CSI)-free multi-antenna strategies for powering wirelessly a large set of single-antenna IoT devices. The CSI-free schemes are AA-SS (AA-IS), where all antennas transmit the same (independent) signal(s), and SA, where just one antenna transmits at a time such that all antennas are utilized during the coherence block. We characterize the distribution of the provided energy under correlated Rician fading for each scheme and find out that while AA-IS and SA cannot take advantage of the multiple antennas to improve the average provided energy, its dispersion can be significantly reduced. Meanwhile, AA-SS provides the greatest average energy, but also the greatest energy dispersion, and the gains depend critically on the mean phase shifts between the antenna elements. We find that consecutive antennas must be $π$ phase-shifted for optimum average energy performance under AA-SS. Our numerical results evidenced that correlation is beneficial under AA-SS, while a greater line of sight (LOS) and/or number of antennas is not always beneficial under such scheme. Meanwhile, both AA-IS and SA schemes benefit from small correlation, large LOS and/or large number of antennas.
△ Less
Submitted 15 June, 2020; v1 submitted 6 February, 2020;
originally announced February 2020.
-
Hybrid Coded Replication in LoRa Networks
Authors:
Jean Michel de Souza Sant'Ana,
Arliones Hoeller,
Richard Demo Souza,
Samuel Montejo-Sánchez,
Hirley Alves,
Mario de Noronha Neto
Abstract:
Low Power Wide Area Networks (LPWAN) are wireless connectivity solutions for Internet-of-Things (IoT) applications, including industrial automation. Among the several LPWAN technologies, LoRaWAN has been extensively addressed by the research community and the industry. However, the reliability and scalability of LoRaWAN are still uncertain. One of the techniques to increase the reliability of LoRa…
▽ More
Low Power Wide Area Networks (LPWAN) are wireless connectivity solutions for Internet-of-Things (IoT) applications, including industrial automation. Among the several LPWAN technologies, LoRaWAN has been extensively addressed by the research community and the industry. However, the reliability and scalability of LoRaWAN are still uncertain. One of the techniques to increase the reliability of LoRaWAN is message replication, which exploits time diversity. This paper proposes a novel hybrid coded message replication scheme that interleaves simple repetition and a recently proposed coded replication method. We analyze the optimization of the proposed scheme under minimum reliability requirements and show that it enhances the network performance without requiring additional transmit power compared to the competing replication techniques.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
Iterative Bayesian-based Localization Mechanism for Industry Verticals
Authors:
Henrique Hilleshein,
Carlos H. M. de Lima,
Hirley Alves,
Matti Latva-aho
Abstract:
We propose and evaluate an iterative localization mechanism employing Bayesian inference to estimate the position of a target using received signal strength measurements. The probability density functions of the target's coordinates are estimated through a Bayesian network. Herein, we consider an iterative procedure whereby our predictor (posterior distribution) is updated in a sequential order wh…
▽ More
We propose and evaluate an iterative localization mechanism employing Bayesian inference to estimate the position of a target using received signal strength measurements. The probability density functions of the target's coordinates are estimated through a Bayesian network. Herein, we consider an iterative procedure whereby our predictor (posterior distribution) is updated in a sequential order whenever new measurements are made available. The performance of the mechanism is assessed in terms of the respective root mean square error and kernel density estimation of the target coordinates. Our numerical results showed the proposed iterative mechanism achieves increasingly better estimation of the target node position each updating round of the Bayesian network with new input measurements.
△ Less
Submitted 4 March, 2020; v1 submitted 14 January, 2020;
originally announced January 2020.
-
On the Secrecy Performance and Power Allocation in Relaying Networks with Untrusted Relay in the Partial Secrecy Regime
Authors:
Diana P. M. Osorio,
Hirley Alves,
Edgar E. B. Olivo
Abstract:
Recently, three useful secrecy metrics based on the partial secrecy regime were proposed to analyze secure transmissions on wireless systems over quasi-static fading channels, namely: generalized secrecy outage probability, average fractional equivocation, and average information leakage. These metrics were devised from the concept of fractional equivocation, which is related to the decoding error…
▽ More
Recently, three useful secrecy metrics based on the partial secrecy regime were proposed to analyze secure transmissions on wireless systems over quasi-static fading channels, namely: generalized secrecy outage probability, average fractional equivocation, and average information leakage. These metrics were devised from the concept of fractional equivocation, which is related to the decoding error probability at the eavesdropper, so as to provide a comprehensive insight on the practical implementation of wireless systems with different levels of secrecy requirements. Considering the partial secrecy regime, in this paper we examine the secrecy performance of an amplify-and-forward relaying network with an untrusted relay node, where a destination-based jamming is employed to enable secure transmissions. In this regard, a closed-form approximation is derived for the generalized secrecy outage probability, and integral-form expressions are obtained for the average fractional equivocation and the average information leakage rate. Additionally, equal and optimal power allocation schemes are investigated and compared for the three metrics. From this analysis, we show that different power allocation approaches lead to different system design criteria. The obtained expressions are validated via Monte Carlo simulations.
△ Less
Submitted 8 December, 2019;
originally announced December 2019.
-
Distributed Rate Control in Downlink NOMA Networks with Reliability Constraints
Authors:
Onel L. A. López,
Hirley Alves,
Matti Latva-aho
Abstract:
Non-orthogonal multiple access (NOMA) has been identified as a promising technology for future wireless systems due to its performance gains in spectral efficiency when compared to conventional orthogonal schemes (OMA). This gain can be easily translated to an increasing number of served users, but imposes a challenge in the system reliability which is of vital importance for new services and appl…
▽ More
Non-orthogonal multiple access (NOMA) has been identified as a promising technology for future wireless systems due to its performance gains in spectral efficiency when compared to conventional orthogonal schemes (OMA). This gain can be easily translated to an increasing number of served users, but imposes a challenge in the system reliability which is of vital importance for new services and applications of coming cellular systems. To cope with these issues we propose a NOMA rate control strategy that makes use only of topological characteristics of the scenario and the reliability constraint. We attain the necessary conditions so that NOMA overcomes the OMA alternative, while we discuss the optimum allocation strategies for the 2-user NOMA setup when operating with equal rate or maximum sum-rate goals. In such scenario we show that the user with the largest target error probability times the ratio between the average receive signal power and the average interference power, should be scheduled to be decoded first for optimum performance. We compare numerically the performance of our allocation scheme with its ideal counterpart requiring full CSI at the BSs and infinitely long blocklength, and show how the gap increases as the reliability constraint becomes more stringent. Results also evidence the benefits of NOMA when the co-interference can be efficiently canceled, specially when the goal is to maximize the sum-rate.
△ Less
Submitted 15 August, 2019;
originally announced August 2019.
-
Achieving Ultra-Reliable Communication via CRAN-Enabled Diversity Schemes
Authors:
Binod Kharel,
Onel L. Alcaraz López,
Hirley Alves,
Matti Latva-aho
Abstract:
Internet of things is in progress to build a smart society, and wireless networks are critical enablers for many of its use cases. In this paper, we present a multi-coordinated transmission scheme to achieve ultra-reliability for critical machine-type wireless communication networks. We take advantage of diversity, which is fundamental for dealing with fading channel impairments, and for achieving…
▽ More
Internet of things is in progress to build a smart society, and wireless networks are critical enablers for many of its use cases. In this paper, we present a multi-coordinated transmission scheme to achieve ultra-reliability for critical machine-type wireless communication networks. We take advantage of diversity, which is fundamental for dealing with fading channel impairments, and for achieving ultra-reliable region of operation in order of five 9's as defined by 3GPP standardization bodies. We evaluate an interference-limited network composed of multiple remote radio heads that are allowed to cooperate, by keeping silence thus reducing interference, or by performing more elaborated strategies such as maximal ratio transmission, in order to serve a user equipment with ultra-reliability. We provide extensive numerical analysis and discuss the gains of cooperation by the centralized radio access network.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
Fixed Rate Statistical QoS Provisioning for Markovian Sources in Machine Type Communication
Authors:
Fahad Qasmi,
Mohammad Shehab,
Hirley Alves,
Matti Latva-aho
Abstract:
In this paper, we study the trade-off between reliability and latency in machine type communication (MTC), which consists of single transmitter and receiver in the presence of Rayleigh fading channel. We assume that the transmitter does not know the channel conditions, therefore it would be transmitting information over a fixed rate. The fixed rate transmission is modeled as a two-state continuous…
▽ More
In this paper, we study the trade-off between reliability and latency in machine type communication (MTC), which consists of single transmitter and receiver in the presence of Rayleigh fading channel. We assume that the transmitter does not know the channel conditions, therefore it would be transmitting information over a fixed rate. The fixed rate transmission is modeled as a two-state continuous-time Markov process, where the optimum transmission rate is obtained. Moreover, we conduct a performance analysis for different arrival traffic originated from MTC device via effective rate transmission. We consider that the arrival traffic is modeled as a Markovian process namely Discrete-Time Markov process, Fluid Markov process, and Markov Modulated Poisson process, under delay violation constraints. Using effective bandwidth and effective capacity theories, we evaluate the trade-off between reliability-latency and identify QoS (Quality of Service) requirement, and derive lower and upper bounds for the effective capacity subject to channel memory decay rate limits.
△ Less
Submitted 26 June, 2019;
originally announced June 2019.
-
Optimum LoRaWAN Configuration Under Wi-SUN Interference
Authors:
Arliones Hoeller-Jr.,
Richard Demo Souza,
Hirley Alves,
Onel L. Alcaraz López,
Samuel Montejo-Sánchez,
Marcelo Eduardo Pellenz
Abstract:
Smart Utility Networks (SUN) rely on the Wireless-SUN (Wi-SUN) specification for years. Recently practitioners and researchers have considered Low-Power Wide-Area Networks (LPWAN) like LoRaWAN for SUN applications. With distinct technologies deployed in the same area and sharing unlicensed bands, one can expect these networks to interfere with one another. This paper builds over a LoRaWAN model to…
▽ More
Smart Utility Networks (SUN) rely on the Wireless-SUN (Wi-SUN) specification for years. Recently practitioners and researchers have considered Low-Power Wide-Area Networks (LPWAN) like LoRaWAN for SUN applications. With distinct technologies deployed in the same area and sharing unlicensed bands, one can expect these networks to interfere with one another. This paper builds over a LoRaWAN model to optimize network parameters while accounting for inter-technology interference. Our analytic model accounts for the interference LoRaWAN receives from IEEE 802.15.4g networks, which forms the bottom layers of Wi-SUN systems. We derive closed-form equations for the expected reliability of LoRaWAN in such scenarios. We set the model parameters with data from real measurements of the interplay among the technologies. Finally, we propose two optimization algorithms to determine the best LoRaWAN configurations, given a targeted minimum reliability level. The algorithms maximize either communication range or the number of users given constraints on the minimum number of users, minimum communication range, and minimum reliability. We validate the models and algorithms through numerical analysis and simulations. The proposed methods are useful tools for planning interference-limited networks with requirements of minimum reliability.
△ Less
Submitted 11 December, 2019; v1 submitted 11 June, 2019;
originally announced June 2019.
-
Energy Internet via Packetized Management: Enabling Technologies and Deployment Challenges
Authors:
Pedro H. J. Nardelli,
Hirley Alves,
Antti Pinomaa,
Sohail Wahid,
Mauricio C. Tomé,
Antti Kosonen,
Florian Kühnlenz,
Ari Pouttu,
Dick Carrillo
Abstract:
This paper investigates the possibility of building the Energy Internet via a packetized management of non-industrial loads. The proposed solution is based on the cyber-physical implementation of energy packets where flexible loads send use requests to an energy server. Based on the existing literature, we explain how and why this approach could scale up to interconnected micro-grids, also pointin…
▽ More
This paper investigates the possibility of building the Energy Internet via a packetized management of non-industrial loads. The proposed solution is based on the cyber-physical implementation of energy packets where flexible loads send use requests to an energy server. Based on the existing literature, we explain how and why this approach could scale up to interconnected micro-grids, also pointing out the challenges involved in relation to the physical deployment of electricity network. We then assess how machine-type wireless communications, as part of 5G and beyond systems, will achieve the low latency and ultra reliability needed by the micro-grid protection while providing the massive coverage needed by the packetized management. This more distributed grid organization also requires localized governance models. We cite few existing examples as local markets, energy communities and micro-operator that support such novel arrangements. We close the paper by providing an overview of ongoing activities that support the proposed vision and possible ways to move forward.
△ Less
Submitted 20 January, 2019; v1 submitted 25 April, 2018;
originally announced April 2018.
-
Event-based Electricity Metering: An Autonomous Method to Determine Transmission Thresholds
Authors:
Mauricio de Castro Tomé,
Pedro. H. J. Nardelli,
Hirley Alves
Abstract:
This paper provides an in-depth analysis of the event-based metering strategy proposed by Simonov et al. This strategy is an alternative to the traditional periodic (time-based) metering where the power demand is averaged in fixed time periods (e.g. every 15 minutes). The event-based approach considers two thresholds that trigger an event, one related to the (instantaneous) power demanded, other t…
▽ More
This paper provides an in-depth analysis of the event-based metering strategy proposed by Simonov et al. This strategy is an alternative to the traditional periodic (time-based) metering where the power demand is averaged in fixed time periods (e.g. every 15 minutes). The event-based approach considers two thresholds that trigger an event, one related to the (instantaneous) power demanded, other to the accumulated energy consumed. The original work assumed these thresholds fixed for the measurements. Our present contribution relaxes this assumption by proposing a method to set the thresholds from the percentage of the peak power consumption over the period under analysis. This approach, in contrast to the time-based and the fixed thresholds, better captures the actual power demanded when different households with diverse power demand profiles are studied. In this sense, our method provides a more efficient way to store electricity demand data while maintaining the estimation error (in relation to the real-time power demand) under acceptable values. Numerical examples are presented to illustrate the advantage and possible drawbacks of the proposed method.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Long-range Low-power Wireless Networks and Sampling Strategies in Electricity Metering
Authors:
Mauricio C. Tomé,
Pedro H. J. Nardelli,
Hirley Alves
Abstract:
This paper studies a specific low-power wireless technology capable of reaching a long range, namely LoRa. Such a technology can be used by different applications in cities involving many transmitting devices while requiring loose communication constrains. We focus on electricity grids, where LoRa end-devices are smart-meters that send the average power demanded by their respective households duri…
▽ More
This paper studies a specific low-power wireless technology capable of reaching a long range, namely LoRa. Such a technology can be used by different applications in cities involving many transmitting devices while requiring loose communication constrains. We focus on electricity grids, where LoRa end-devices are smart-meters that send the average power demanded by their respective households during a given period. The successfully decoded data by the LoRa gateway are used by an aggregator to reconstruct the daily households' profiles. We show how the interference from concurrent transmissions from both LoRa and non-LoRa devices negatively affect the communication outage probability and the link effective bit-rate. Besides, we use actual electricity consumption data to compare time-based and event-based sampling strategies, showing the advantages of the latter. We then employ this analysis to assess the gateway range that achieves an average outage probability that leads to a signal reconstruction with a given requirement. We also discuss that, although the proposed analysis focuses on electricity metering, it can be easily extended to any other smart city application with similar requirements, like water metering or traffic monitoring.
△ Less
Submitted 6 March, 2018;
originally announced March 2018.
-
Fuzzy-Based Dialectical Non-Supervised Image Classification and Clustering
Authors:
Wellington Pinheiro dos Santos,
Francisco Marcos de Assis,
Ricardo Emmanuel de Souza,
Priscilla B. Mendes,
Henrique S. S. Monteiro,
Havana Diogo Alves
Abstract:
The materialist dialectical method is a philosophical investigative method to analyze aspects of reality. These aspects are viewed as complex processes composed by basic units named poles, which interact with each other. Dialectics has experienced considerable progress in the 19th century, with Hegel's dialectics and, in the 20th century, with the works of Marx, Engels, and Gramsci, in Philosophy…
▽ More
The materialist dialectical method is a philosophical investigative method to analyze aspects of reality. These aspects are viewed as complex processes composed by basic units named poles, which interact with each other. Dialectics has experienced considerable progress in the 19th century, with Hegel's dialectics and, in the 20th century, with the works of Marx, Engels, and Gramsci, in Philosophy and Economics. The movement of poles through their contradictions is viewed as a dynamic process with intertwined phases of evolution and revolutionary crisis. In order to build a computational process based on dialectics, the interaction between poles can be modeled using fuzzy membership functions. Based on this assumption, we introduce the Objective Dialectical Classifier (ODC), a non-supervised map for classification based on materialist dialectics and designed as an extension of fuzzy c-means classifier. As a case study, we used ODC to classify 181 magnetic resonance synthetic multispectral images composed by proton density, $T_1$- and $T_2$-weighted synthetic brain images. Comparing ODC to k-means, fuzzy c-means, and Kohonen's self-organized maps, concerning with image fidelity indexes as estimatives of quantization distortion, we proved that ODC can reach almost the same quantization performance as optimal non-supervised classifiers like Kohonen's self-organized maps.
△ Less
Submitted 3 December, 2017;
originally announced December 2017.
-
Storage Management in Modern Electricity Power Grids
Authors:
Pedro H. J. Nardelli,
Hirley Alves
Abstract:
This letter introduces a method to manage energy storage in electricity grids. Starting from the stochastic characterization of electricity generation and demand, we propose an equation that relates the storage level for every time-step as a function of its previous state and the realized surplus/deficit of electricity. Therefrom, we can obtain the probability that, in the next time-step: (i) ther…
▽ More
This letter introduces a method to manage energy storage in electricity grids. Starting from the stochastic characterization of electricity generation and demand, we propose an equation that relates the storage level for every time-step as a function of its previous state and the realized surplus/deficit of electricity. Therefrom, we can obtain the probability that, in the next time-step: (i) there is a generation surplus that cannot be stored, or (ii) there is a demand need that cannot be supplied by the available storage. We expect this simple procedure can be used as the basis of electricity self-management algorithms in micro-level (e.g. individual households) or in meso-level (e.g. groups of houses).
△ Less
Submitted 2 December, 2016;
originally announced December 2016.
-
Maximizing the Link Throughput between Smart-meters and Aggregators as Secondary Users under Power and Outage Constraints
Authors:
Pedro H. J. Nardelli,
Mauricio de Castro Tomé,
Hirley Alves,
Carlos H. M. de Lima,
Matti Latva-aho
Abstract:
This paper assesses the communication link from smart meters to aggregators as (unlicensed) secondary users that transmit their data over the (licensed) primary uplink channel. The proposed scenario assumes: (i) meters' and aggregators' positions are fixed so highly directional antennas are employed, (ii) secondary users transmit with limited power in relation to the primary, (iii) meters' transmi…
▽ More
This paper assesses the communication link from smart meters to aggregators as (unlicensed) secondary users that transmit their data over the (licensed) primary uplink channel. The proposed scenario assumes: (i) meters' and aggregators' positions are fixed so highly directional antennas are employed, (ii) secondary users transmit with limited power in relation to the primary, (iii) meters' transmissions are coordinated to avoid packet collisions, and (iv) the secondary links' robustness is guaranteed by an outage constraint. Under these assumptions, the interference caused by secondary users in both primary (base-stations) and other secondary users can be neglected. As unlicensed users, however, meter-aggregator links do experience interference from the mobile users of the primary network, whose positions and traffic activity are unknown. To cope with this uncertainty, we model the mobile users spatial distribution as a Poisson point process. We then derive a closed-form solution for the maximum achievable throughput with respect to a reference secondary link subject to transmit power and outage constraints. Our numerical results illustrate the effects of such constraints on the optimal throughput, evincing that more frequent outage events improve the system performance in the scenario under study. We also show that relatively high outage probabilities have little effect on the reconstruction of the average power demand curve that is transmitted from the smart-meter to the aggregator.
△ Less
Submitted 16 February, 2016; v1 submitted 16 June, 2015;
originally announced June 2015.