Showing 1–10 of 10 results for author: Ashikhmin, A

No Analog Combiner TTD-based Hybrid Precoding for Multi-User Sub-THz Communications

Authors: Dang Qua Nguyen, Alexei Ashikhmin, Hong Yang, Taejoon Kim

Abstract: We address the design and optimization of real-world-suitable hybrid precoders for multi-user wideband sub-terahertz (sub-THz) communications. We note that the conventional fully connected true-time delay (TTD)-based architecture is impractical because there is no room for the required large number of analog signal combiners in the circuit board. Additionally, analog signal combiners incur signifi… ▽ More We address the design and optimization of real-world-suitable hybrid precoders for multi-user wideband sub-terahertz (sub-THz) communications. We note that the conventional fully connected true-time delay (TTD)-based architecture is impractical because there is no room for the required large number of analog signal combiners in the circuit board. Additionally, analog signal combiners incur significant signal power loss. These limitations are often overlooked in sub-THz research. To overcome these issues, we study a non-overlapping subarray architecture that eliminates the need for analog combiners. We extend the conventional single-user assumption by formulating an optimization problem to maximize the minimum data rate for simultaneously served users. This complex optimization problem is divided into two sub-problems. The first sub-problem aims to ensure a fair subarray allocation for all users and is solved via a continuous domain relaxation technique. The second sub-problem deals with practical TTD device constraints on range and resolution to maximize the subarray gain and is resolved by shifting to the phase domain. Our simulation results highlight significant performance gain for our real-world-ready TTD-based hybrid precoders. △ Less

Submitted 17 June, 2024; originally announced June 2024.

Smart Hybrid Beamforming and Pilot Assignment for 6G Cell-Free Massive MIMO

Authors: Carles Diaz-Vilor, Alexei Ashikhmin, Hong Yang

Abstract: This paper investigates Cell-Free massive MIMO networks, where each access point (AP) is equipped with a hybrid transceiver, reducing the complexity and cost compared to a fully digital transceiver. Asymptotic approximations for the spectral efficiency are derived for uplink and downlink. Capitalizing on these expressions, a max-min problem is formulated to optimize the (i) analog beamformer at th… ▽ More This paper investigates Cell-Free massive MIMO networks, where each access point (AP) is equipped with a hybrid transceiver, reducing the complexity and cost compared to a fully digital transceiver. Asymptotic approximations for the spectral efficiency are derived for uplink and downlink. Capitalizing on these expressions, a max-min problem is formulated to optimize the (i) analog beamformer at the APs and (ii) pilot assignment. Simulations show that the optimization of these variables substantially increases the network performance. △ Less

Submitted 12 January, 2023; v1 submitted 10 October, 2022; originally announced October 2022.

Two-Stage Channel Estimation Approach for Cell-Free IoT With Massive Random Access

Authors: Xinhua Wang, Alexei Ashikhmin, Zhicheng Dong, Chao Zhai

Abstract: We investigate the activity detection and channel estimation issues for cell-free Internet of Things (IoT) networks with massive random access. In each time slot, only partial devices are active and communicate with neighboring access points (APs) using non-orthogonal random pilot sequences. Different from the centralized processing in cellular networks, the activity detection and channel estimati… ▽ More We investigate the activity detection and channel estimation issues for cell-free Internet of Things (IoT) networks with massive random access. In each time slot, only partial devices are active and communicate with neighboring access points (APs) using non-orthogonal random pilot sequences. Different from the centralized processing in cellular networks, the activity detection and channel estimation in cell-free IoT is more challenging due to the distributed and user-centric architecture. We propose a two-stage approach to detect the random activities of devices and estimate their channel states. In the first stage, the activity of each device is jointly detected by its adjacent APs based on the vector approximate message passing (Vector AMP) algorithm. In the second stage, each AP re-estimates the channel using the linear minimum mean square error (LMMSE) method based on the detected activities to improve the channel estimation accuracy. We derive closed-form expressions for the activity detection error probability and the mean-squared channel estimation errors for a typical device. Finally, we analyze the performance of the entire cell-free IoT network in terms of coverage probability. Simulation results validate the derived closed-form expressions and show that the cell-free IoT significantly outperforms the collocated massive MIMO and small-cell schemes in terms of coverage probability. △ Less

Submitted 27 September, 2021; originally announced September 2021.

Can Massive MIMO Support URLLC?

Authors: Hangsong Yan, Alexei Ashikhmin, Hong Yang

Abstract: We investigate the feasibility of using Massive MIMO to support URLLC in both coherence interval based and 3GPP compliant pilot settings. We consider grant-free uplink transmission with MMSE receiver and adopt 3GPP channel models. In the coherence interval based pilot setting, by extensive system level simulations, we find that using a Massive MIMO base station with 128 antennas and MMSE receiver,… ▽ More We investigate the feasibility of using Massive MIMO to support URLLC in both coherence interval based and 3GPP compliant pilot settings. We consider grant-free uplink transmission with MMSE receiver and adopt 3GPP channel models. In the coherence interval based pilot setting, by extensive system level simulations, we find that using a Massive MIMO base station with 128 antennas and MMSE receiver, URLLC requirements can be achieved in Urban Macro (UMa) Non-Line of Sight (NLoS) with orthogonal pilots and Neyman-Pearson detector. However, in the 3GPP compliant pilot setting, even by using the covariance matrix of Physical Resource Block (PRB) subcarriers for active UE detection and channel estimation as well as open-loop power control, we find that URLLC requirements are still challenging to achieve due to the insufficient pilot length and pilot symbol location regulations in a PRB. △ Less

Submitted 23 February, 2021; v1 submitted 17 February, 2021; originally announced February 2021.

Comments: 5 pages, 5 figures, to appear in the 2021 IEEE 93rd Vehicular Technology Conference (VTC2021-Spring)

Unequal Error Protection Achieves Threshold Gains on BEC and BSC via Higher Fidelity Messages

Authors: Beyza Dabak, Ahmed Hareedy, Alexei Ashikhmin, Robert Calderbank

Abstract: Because of their capacity-approaching performance, graph-based codes have a wide range of applications, including communications and storage. In these codes, unequal error protection (UEP) can offer performance gains with limited rate loss. Recent empirical results in magnetic recording (MR) systems show that extra protection for the parity bits of a low-density parity-check (LDPC) code via constr… ▽ More Because of their capacity-approaching performance, graph-based codes have a wide range of applications, including communications and storage. In these codes, unequal error protection (UEP) can offer performance gains with limited rate loss. Recent empirical results in magnetic recording (MR) systems show that extra protection for the parity bits of a low-density parity-check (LDPC) code via constrained coding results in significant density gains. In particular, when UEP is applied via more reliable parity bits, higher fidelity messages of parity bits are spread to all bits by message passing algorithm, enabling performance gains. Threshold analysis is a tool to measure the effectiveness of a graph-based code or coding scheme. In this paper, we provide a theoretical analysis of this UEP idea using extrinsic information transfer (EXIT) charts in the binary erasure channel (BEC) and the binary symmetric channel (BSC). We use EXIT functions to investigate the effect of change in mutual information of parity bits on the overall coding scheme. We propose a setup in which parity bits of a repeat-accumulate (RA) LDPC code have lower erasure or crossover probabilities than input information bits. We derive the a-priori and extrinsic mutual information functions for check nodes and variable nodes of the code. After applying our UEP setup to the information functions, we formulate a linear programming problem to find the optimal degree distribution that maximizes the code rate under the decoding convergence constraint. Results show that UEP via higher fidelity parity bits achieves up to about $17\%$ and $28\%$ threshold gains on BEC and BSC, respectively. △ Less

Submitted 22 January, 2021; originally announced January 2021.

Comments: 8 pages (double column), 3 figures, submitted to the IEEE International Symposium on Information Theory (ISIT)

Optimally Supporting IoT with Cell-Free Massive MIMO

Authors: Hangsong Yan, Alexei Ashikhmin, Hong Yang

Abstract: We study internet of things (IoT) systems supported by cell-free (CF) massive MIMO (mMIMO) with optimal linear channel estimation. For the uplink, we consider optimal linear MIMO receiver and obtain an uplink SINR approximation involving only large-scale fading coefficients using random matrix (RM) theory. Using this approximation we design several max-min power control algorithms that incorporate… ▽ More We study internet of things (IoT) systems supported by cell-free (CF) massive MIMO (mMIMO) with optimal linear channel estimation. For the uplink, we consider optimal linear MIMO receiver and obtain an uplink SINR approximation involving only large-scale fading coefficients using random matrix (RM) theory. Using this approximation we design several max-min power control algorithms that incorporate power and rate weighting coefficients to achieve a target rate with high energy efficiency. For the downlink, we consider maximum ratio (MR) beamforming. Instead of solving a complex quasi-concave problem for downlink power control, we employ a neural network (NN) technique to obtain comparable power control with around 30 times reduction in computation time. For large networks we proposed a different NN based power control algorithm. This algorithm is sub-optimal, but its big advantage is that it is scalable. △ Less

Submitted 29 November, 2020; originally announced November 2020.

Comments: 6 pages, 7 figures. 2020 IEEE Global Communications Conference (GLOBECOM). arXiv admin note: text overlap with arXiv:2005.06696

Cell-Free Massive MIMO with Nonorthogonal Pilots for Internet of Things

Authors: Shilpa Rao, Alexei Ashikhmin, Hong Yang

Abstract: We consider Internet of Things (IoT) organized on the principles of cell-free massive MIMO. Since the number of things is very large, orthogonal pilots cannot be assigned to all of them even if the things are stationary. This results in an unavoidable pilot contamination problem, worsened by the fact that, for IoT, since the things are operating at very low transmit power. To mitigate this problem… ▽ More We consider Internet of Things (IoT) organized on the principles of cell-free massive MIMO. Since the number of things is very large, orthogonal pilots cannot be assigned to all of them even if the things are stationary. This results in an unavoidable pilot contamination problem, worsened by the fact that, for IoT, since the things are operating at very low transmit power. To mitigate this problem and achieve a high throughput, we use cell-free systems with optimal linear minimum mean squared error (LMMSE) channel estimation, while traditionally simple suboptimal estimators have been used in such systems. We further derive the analytical uplink and downlink signal-to-interference-plus-noise ratio (SINR) expressions for this scenario, which depends only on large scale fading coefficients. This allows us to design new power control algorithms that require only infrequent transmit power adaptation. Simulation results show a 40% improvement in uplink and downlink throughputs and 95% in energy efficiency over existing cell-free wireless systems and at least a three-fold uplink improvement over known IoT systems based on small-cell systems. △ Less

Submitted 18 June, 2020; originally announced June 2020.

A Scalable and Energy Efficient IoT System Supported by Cell-Free Massive MIMO

Authors: Hangsong Yan, Alexei Ashikhmin, Hong Yang

Abstract: An IoT (Internet of things) system supports a massive number of IoT devices wirelessly. We show how to use Cell-Free Massive MIMO (multiple-input and multiple-output) to provide a scalable and energy efficient IoT system. We employ optimal linear estimation with random pilots to acquire CSI (channel state information) for MIMO precoding and decoding. In the uplink, we employ optimal linear decoder… ▽ More An IoT (Internet of things) system supports a massive number of IoT devices wirelessly. We show how to use Cell-Free Massive MIMO (multiple-input and multiple-output) to provide a scalable and energy efficient IoT system. We employ optimal linear estimation with random pilots to acquire CSI (channel state information) for MIMO precoding and decoding. In the uplink, we employ optimal linear decoder and utilize RM (random matrix) theory to obtain two accurate SINR (signal-to-interference plus noise ratio) approximations involving only large-scale fading coefficients. We derive several max-min type power control algorithms based on both exact SINR expression and RM approximations. Next, we consider the power control problem for downlink (DL) transmission. To avoid solving a time-consuming quasi-concave problem that requires repeat tests for the feasibility of a SOCP (second-order cone programming) problem, we develop a neural network (NN) aided power control algorithm that results in 30 times reduction in computation time. This power control algorithm leads to scalable Cell-Free Massive MIMO networks in which the amount of computations conducted by each AP does not depend on the number of network APs. Both UL and DL power control algorithms allow visibly improve the system spectral efficiency (SE) and, more importantly, lead to multi-fold improvements in Energy Efficiency (EE), which is crucial for IoT networks. △ Less

Submitted 14 November, 2020; v1 submitted 13 May, 2020; originally announced May 2020.

Comments: 13 pages, 8 figures

Long-term scheduling and power control for wirelessly powered cell-free IoT

Authors: Xinhua Wang, Xiaodong Wang, Alexei Ashikhmin

Abstract: We investigate the long-term scheduling and power control scheme for a wirelessly powered cell-free Internet of Things (IoT) network which consists of distributed access points (APs) and large number of sensors. In each time slot, a subset of sensors are scheduled for uplink data transmission or downlink power transfer. Through asymptotic analysis, we obtain closedform expressions for the harveste… ▽ More We investigate the long-term scheduling and power control scheme for a wirelessly powered cell-free Internet of Things (IoT) network which consists of distributed access points (APs) and large number of sensors. In each time slot, a subset of sensors are scheduled for uplink data transmission or downlink power transfer. Through asymptotic analysis, we obtain closedform expressions for the harvested energy and the achievable rates that are independent of random pilots. Then, using these expressions, we formulate a long-term scheduling and power control problem to maximize the minimum time average achievable rate among all sensors, while maintaining the battery state of each sensor higher than a predefined minimum level. Using Lyapunov optimization, the transmission mode, the active sensor set, and the power control coefficients for each time slot are jointly determined. Finally, simulation results validate the accuracy of our derived closed-form expressions and reveal that the minimum time average achievable rate is boosted significantly by the proposed scheme compare with the simple greedy transmission scheme. △ Less

Submitted 10 April, 2020; originally announced April 2020.

Wirelessly Powered Cell-free IoT: Analysis and Optimization

Authors: Xinhua Wang, Alexei Ashikhmin, Xiaodong Wang

Abstract: In this paper, we propose a wirelessly powered Internet of Things (IoT) system based on the cell-free massive MIMO technology. In such a system, during the downlink phase, the sensors harvest radio-frequency (RF) energy emitted by the distributed access points (APs). During the uplink phase, sensors transmit data to the APs using the harvested energy. Collocated massive MIMO and small-cell IoT can… ▽ More In this paper, we propose a wirelessly powered Internet of Things (IoT) system based on the cell-free massive MIMO technology. In such a system, during the downlink phase, the sensors harvest radio-frequency (RF) energy emitted by the distributed access points (APs). During the uplink phase, sensors transmit data to the APs using the harvested energy. Collocated massive MIMO and small-cell IoT can be treated as special cases of cell-free IoT. We derive the tight closed-form lower bound on the amount of harvested energy, and the closed-form expression of SINR as the metrics of power transfer and data transmission, respectively. To improve the energy efficiency, we jointly optimize the uplink and downlink power control coefficients to minimize the total transmit energy consumption while meeting the target SINRs. Extended simulation results show that cell-free IoT outperforms collocated massive MIMO and small-cell IoT both in terms of the per user throughput for uplink, and the amount of energy harvested for downlink. Moreover, significant gains can be achieved by the proposed joint power control in terms of both per user throughput and energy consumption. △ Less

Submitted 6 January, 2020; originally announced January 2020.