-
ML-Based Feedback-Free Adaptive MCS Selection for Massive Multi-User MIMO
Authors:
Qing An,
Mehdi Zafari,
Chris Dick,
Santiago Segarra,
Ashutosh Sabharwal,
Rahman Doost-Mohammady
Abstract:
As wireless communication systems strive to improve spectral efficiency, there has been a growing interest in employing machine learning (ML)-based approaches for adaptive modulation and coding scheme (MCS) selection. In this paper, we introduce a new adaptive MCS selection framework for massive MIMO systems that operates without any feedback from users by solely relying on instantaneous uplink ch…
▽ More
As wireless communication systems strive to improve spectral efficiency, there has been a growing interest in employing machine learning (ML)-based approaches for adaptive modulation and coding scheme (MCS) selection. In this paper, we introduce a new adaptive MCS selection framework for massive MIMO systems that operates without any feedback from users by solely relying on instantaneous uplink channel estimates. Our proposed method can effectively operate in multi-user scenarios where user feedback imposes excessive delay and bandwidth overhead. To learn the mapping between the user channel matrices and the optimal MCS level of each user, we develop a Convolutional Neural Network (CNN)-Long Short-Term Memory Network (LSTM)-based model and compare the performance with the state-of-the-art methods. Finally, we validate the effectiveness of our algorithm by evaluating it experimentally using real-world datasets collected from the RENEW massive MIMO platform.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
DUIDD: Deep-Unfolded Interleaved Detection and Decoding for MIMO Wireless Systems
Authors:
Reinhard Wiesmayr,
Chris Dick,
Jakob Hoydis,
Christoph Studer
Abstract:
Iterative detection and decoding (IDD) is known to achieve near-capacity performance in multi-antenna wireless systems. We propose deep-unfolded interleaved detection and decoding (DUIDD), a new paradigm that reduces the complexity of IDD while achieving even lower error rates. DUIDD interleaves the inner stages of the data detector and channel decoder, which expedites convergence and reduces comp…
▽ More
Iterative detection and decoding (IDD) is known to achieve near-capacity performance in multi-antenna wireless systems. We propose deep-unfolded interleaved detection and decoding (DUIDD), a new paradigm that reduces the complexity of IDD while achieving even lower error rates. DUIDD interleaves the inner stages of the data detector and channel decoder, which expedites convergence and reduces complexity. Furthermore, DUIDD applies deep unfolding to automatically optimize algorithmic hyperparameters, soft-information exchange, message damping, and state forwarding. We demonstrate the efficacy of DUIDD using NVIDIA's Sionna link-level simulator in a 5G-near multi-user MIMO-OFDM wireless system with a novel low-complexity soft-input soft-output data detector, an optimized low-density parity-check decoder, and channel vectors from a commercial ray-tracer. Our results show that DUIDD outperforms classical IDD both in terms of block error rate and computational complexity.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
Accelerated massive MIMO detector based on annealed underdamped Langevin dynamics
Authors:
Nicolas Zilberstein,
Chris Dick,
Rahman Doost-Mohammady,
Ashutosh Sabharwal,
Santiago Segarra
Abstract:
We propose a multiple-input multiple-output (MIMO) detector based on an annealed version of the \emph{underdamped} Langevin (stochastic) dynamic. Our detector achieves state-of-the-art performance in terms of symbol error rate (SER) while keeping the computational complexity in check. Indeed, our method can be easily tuned to strike the right balance between computational complexity and performanc…
▽ More
We propose a multiple-input multiple-output (MIMO) detector based on an annealed version of the \emph{underdamped} Langevin (stochastic) dynamic. Our detector achieves state-of-the-art performance in terms of symbol error rate (SER) while keeping the computational complexity in check. Indeed, our method can be easily tuned to strike the right balance between computational complexity and performance as required by the application at hand. This balance is achieved by tuning hyperparameters that control the length of the simulated Langevin dynamic. Through numerical experiments, we demonstrate that our detector yields lower SER than competing approaches (including learning-based ones) with a lower running time compared to a previously proposed \emph{overdamped} Langevin-based MIMO detector.
△ Less
Submitted 26 October, 2022;
originally announced October 2022.
-
Bit Error and Block Error Rate Training for ML-Assisted Communication
Authors:
Reinhard Wiesmayr,
Gian Marti,
Chris Dick,
Haochuan Song,
Christoph Studer
Abstract:
Even though machine learning (ML) techniques are being widely used in communications, the question of how to train communication systems has received surprisingly little attention. In this paper, we show that the commonly used binary cross-entropy (BCE) loss is a sensible choice in uncoded systems, e.g., for training ML-assisted data detectors, but may not be optimal in coded systems. We propose n…
▽ More
Even though machine learning (ML) techniques are being widely used in communications, the question of how to train communication systems has received surprisingly little attention. In this paper, we show that the commonly used binary cross-entropy (BCE) loss is a sensible choice in uncoded systems, e.g., for training ML-assisted data detectors, but may not be optimal in coded systems. We propose new loss functions targeted at minimizing the block error rate and SNR deweighting, a novel method that trains communication systems for optimal performance over a range of signal-to-noise ratios. The utility of the proposed loss functions as well as of SNR deweighting is shown through simulations in NVIDIA Sionna.
△ Less
Submitted 6 March, 2023; v1 submitted 25 October, 2022;
originally announced October 2022.
-
Low Complexity Hybrid Beamforming for mmWave Full-Duplex Integrated Access and Backhaul
Authors:
Elyes Balti,
Chris Dick,
Brian L. Evans
Abstract:
We consider an integrated access and backhaul (IAB) node operating in full-duplex (FD) mode. We analyze simultaneous transmission from the New Radio gNB to the IAB node on the backhaul uplink, IAB node to a user equipment (UE) on the access downlink, and IAB transmitter to the IAB receiver on the self-interference (SI) channel. Our contributions include (1) a low complexity algorithm to jointly de…
▽ More
We consider an integrated access and backhaul (IAB) node operating in full-duplex (FD) mode. We analyze simultaneous transmission from the New Radio gNB to the IAB node on the backhaul uplink, IAB node to a user equipment (UE) on the access downlink, and IAB transmitter to the IAB receiver on the self-interference (SI) channel. Our contributions include (1) a low complexity algorithm to jointly design the hybrid analog/digital beamformers for all three nodes to maximize the sum spectral efficiency of the access and backhaul links by canceling SI and maximizing received power; (2) derivation of all-digital beamforming and spectral efficiency upper bound for use in benchmarking; and (3) simulations to compare full vs. half duplex modes, hybrid vs. all-digital beamforming algorithms, proposed hybrid vs. conventional beamforming algorithms, and spectral efficiency upper bound. In simulations, the proposed algorithm shows significant reduction in SI power and increase in sum spectral efficiency.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Annealed Langevin Dynamics for Massive MIMO Detection
Authors:
Nicolas Zilberstein,
Chris Dick,
Rahman Doost-Mohammady,
Ashutosh Sabharwal,
Santiago Segarra
Abstract:
Solving the optimal symbol detection problem in multiple-input multiple-output (MIMO) systems is known to be NP-hard. Hence, the objective of any detector of practical relevance is to get reasonably close to the optimal solution while keeping the computational complexity in check. In this work, we propose a MIMO detector based on an annealed version of Langevin (stochastic) dynamics. More precisel…
▽ More
Solving the optimal symbol detection problem in multiple-input multiple-output (MIMO) systems is known to be NP-hard. Hence, the objective of any detector of practical relevance is to get reasonably close to the optimal solution while keeping the computational complexity in check. In this work, we propose a MIMO detector based on an annealed version of Langevin (stochastic) dynamics. More precisely, we define a stochastic dynamical process whose stationary distribution coincides with the posterior distribution of the symbols given our observations. In essence, this allows us to approximate the maximum a posteriori estimator of the transmitted symbols by sampling from the proposed Langevin dynamic. Furthermore, we carefully craft this stochastic dynamic by gradually adding a sequence of noise with decreasing variance to the trajectories, which ensures that the estimated symbols belong to a pre-specified discrete constellation. Based on the proposed MIMO detector, we also design a robust version of the method by unfolding and parameterizing one term -- the score of the likelihood -- by a neural network. Through numerical experiments in both synthetic and real-world data, we show that our proposed detector yields state-of-the-art symbol error rate performance and the robust version becomes noise-variance agnostic.
△ Less
Submitted 17 March, 2023; v1 submitted 11 May, 2022;
originally announced May 2022.
-
Going Beyond RF: How AI-enabled Multimodal Beamforming will Shape the NextG Standard
Authors:
Debashri Roy,
Batool Salehi,
Stella Banou,
Subhramoy Mohanti,
Guillem Reus-Muns,
Mauro Belgiovine,
Prashant Ganesh,
Carlos Bocanegra,
Chris Dick,
Kaushik Chowdhury
Abstract:
Incorporating artificial intelligence and machine learning (AI/ML) methods within the 5G wireless standard promises autonomous network behavior and ultra-low-latency reconfiguration. However, the effort so far has purely focused on learning from radio frequency (RF) signals. Future standards and next-generation (nextG) networks beyond 5G will have two significant evolutions over the state-of-the-a…
▽ More
Incorporating artificial intelligence and machine learning (AI/ML) methods within the 5G wireless standard promises autonomous network behavior and ultra-low-latency reconfiguration. However, the effort so far has purely focused on learning from radio frequency (RF) signals. Future standards and next-generation (nextG) networks beyond 5G will have two significant evolutions over the state-of-the-art 5G implementations: (i) massive number of antenna elements, scaling up to hundreds-to-thousands in number, and (ii) inclusion of AI/ML in the critical path of the network reconfiguration process that can access sensor feeds from a variety of RF and non-RF sources. While the former allows unprecedented flexibility in 'beamforming', where signals combine constructively at a target receiver, the latter enables the network with enhanced situation awareness not captured by a single and isolated data modality. This survey presents a thorough analysis of the different approaches used for beamforming today, focusing on mmWave bands, and then proceeds to make a compelling case for considering non-RF sensor data from multiple modalities, such as LiDAR, Radar, GPS for increasing beamforming directional accuracy and reducing processing time. This so called idea of multimodal beamforming will require deep learning based fusion techniques, which will serve to augment the current RF-only and classical signal processing methods that do not scale well for massive antenna arrays. The survey describes relevant deep learning architectures for multimodal beamforming, identifies computational challenges and the role of edge computing in this process, dataset generation tools, and finally, lists open challenges that the community should tackle to realize this transformative vision of the future of beamforming.
△ Less
Submitted 30 March, 2022;
originally announced March 2022.
-
Detection by Sampling: Massive MIMO Detector based on Langevin Dynamics
Authors:
Nicolas Zilberstein,
Chris Dick,
Rahman Doost-Mohammady,
Ashutosh Sabharwal,
Santiago Segarra
Abstract:
Optimal symbol detection in multiple-input multiple-output (MIMO) systems is known to be an NP-hard problem. Hence, the objective of any detector of practical relevance is to get reasonably close to the optimal solution while keeping the computational complexity in check. In this work, we propose a MIMO detector based on an annealed version of Langevin (stochastic) dynamics. More precisely, we def…
▽ More
Optimal symbol detection in multiple-input multiple-output (MIMO) systems is known to be an NP-hard problem. Hence, the objective of any detector of practical relevance is to get reasonably close to the optimal solution while keeping the computational complexity in check. In this work, we propose a MIMO detector based on an annealed version of Langevin (stochastic) dynamics. More precisely, we define a stochastic dynamical process whose stationary distribution coincides with the posterior distribution of the symbols given our observations. In essence, this allows us to approximate the maximum a posteriori estimator of the transmitted symbols by sampling from the proposed Langevin dynamic. Furthermore, we carefully craft this stochastic dynamic by gradually adding a sequence of noise with decreasing variance to the trajectories, which ensures that the estimated symbols belong to a pre-specified discrete constellation. Through numerical experiments, we show that our proposed detector yields state-of-the-art symbol error rate performance.
△ Less
Submitted 24 February, 2022;
originally announced February 2022.
-
Robust MIMO Detection using Hypernetworks with Learned Regularizers
Authors:
Nicolas Zilberstein,
Chris Dick,
Rahman Doost-Mohammady,
Ashutosh Sabharwal,
Santiago Segarra
Abstract:
Optimal symbol detection in multiple-input multiple-output (MIMO) systems is known to be an NP-hard problem. Recently, there has been a growing interest to get reasonably close to the optimal solution using neural networks while keeping the computational complexity in check. However, existing work based on deep learning shows that it is difficult to design a generic network that works well for a v…
▽ More
Optimal symbol detection in multiple-input multiple-output (MIMO) systems is known to be an NP-hard problem. Recently, there has been a growing interest to get reasonably close to the optimal solution using neural networks while keeping the computational complexity in check. However, existing work based on deep learning shows that it is difficult to design a generic network that works well for a variety of channels. In this work, we propose a method that tries to strike a balance between symbol error rate (SER) performance and generality of channels. Our method is based on hypernetworks that generate the parameters of a neural network-based detector that works well on a specific channel. We propose a general framework by regularizing the training of the hypernetwork with some pre-trained instances of the channel-specific method. Through numerical experiments, we show that our proposed method yields high performance for a set of prespecified channel realizations while generalizing well to all channels drawn from a specific distribution.
△ Less
Submitted 13 October, 2021;
originally announced October 2021.
-
Signal Processing Based Deep Learning for Blind Symbol Decoding and Modulation Classification
Authors:
Samer Hanna,
Chris Dick,
Danijela Cabric
Abstract:
Blindly decoding a signal requires estimating its unknown transmit parameters, compensating for the wireless channel impairments, and identifying the modulation type. While deep learning can solve complex problems, digital signal processing (DSP) is interpretable and can be more computationally efficient. To combine both, we propose the dual path network (DPN). It consists of a signal path of DSP…
▽ More
Blindly decoding a signal requires estimating its unknown transmit parameters, compensating for the wireless channel impairments, and identifying the modulation type. While deep learning can solve complex problems, digital signal processing (DSP) is interpretable and can be more computationally efficient. To combine both, we propose the dual path network (DPN). It consists of a signal path of DSP operations that recover the signal, and a feature path of neural networks that estimate the unknown transmit parameters. By interconnecting the paths over several recovery stages, later stages benefit from the recovered signals and reuse all the previously extracted features. The proposed design is demonstrated to provide 5% improvement in modulation classification compared to alternative designs lacking either feature sharing or access to recovered signals. The estimation results of DPN along with its blind decoding performance are shown to outperform a blind signal processing algorithm for BPSK and QPSK on a simulated dataset. An over-the-air software-defined-radio capture was used to verify DPN results at high SNRs. DPN design can process variable length inputs and is shown to outperform relying on fixed length inputs with prediction averaging on longer signals by up to 15% in modulation classification.
△ Less
Submitted 25 October, 2021; v1 submitted 19 June, 2021;
originally announced June 2021.
-
Combining Deep Learning and Linear Processing for Modulation Classification and Symbol Decoding
Authors:
Samer Hanna,
Chris Dick,
Danijela Cabric
Abstract:
Deep learning has been recently applied to many problems in wireless communications including modulation classification and symbol decoding. Many of the existing end-to-end learning approaches demonstrated robustness to signal distortions like frequency and timing errors, and outperformed classical signal processing techniques with sufficient training. However, deep learning approaches typically r…
▽ More
Deep learning has been recently applied to many problems in wireless communications including modulation classification and symbol decoding. Many of the existing end-to-end learning approaches demonstrated robustness to signal distortions like frequency and timing errors, and outperformed classical signal processing techniques with sufficient training. However, deep learning approaches typically require hundreds of thousands of floating points operations for inference, which is orders of magnitude higher than classical signal processing approaches and thus do not scale well for long sequences. Additionally, they typically operate as a black box and without insight on how their final output was obtained, they can't be integrated with existing approaches. In this paper, we propose a novel neural network architecture that combines deep learning with linear signal processing typically done at the receiver to realize joint modulation classification and symbol recovery. The proposed method estimates signal parameters by learning and corrects signal distortions like carrier frequency offset and multipath fading by linear processing. Using this hybrid approach, we leverage the power of deep learning while retaining the efficiency of conventional receiver processing techniques for long sequences. The proposed hybrid approach provides good accuracy in signal distortion estimation leading to promising results in terms of symbol error rate. For modulation classification accuracy, it outperforms many state of the art deep learning networks.
△ Less
Submitted 13 September, 2020; v1 submitted 1 June, 2020;
originally announced June 2020.