Showing 1–43 of 43 results for author: Gong, S

Massive MIMO-OTFS-Based Random Access for Cooperative LEO Satellite Constellations

Authors: Boxiao Shen, Yongpeng Wu, Shiqi Gong, Heng Liu, Björn Ottersten, Wenjun Zhang

Abstract: This paper investigates joint device identification, channel estimation, and symbol detection for cooperative multi-satellite-enhanced random access, where orthogonal time-frequency space modulation with the large antenna array is utilized to combat the dynamics of the terrestrial-satellite links (TSLs). We introduce the generalized complex exponential basis expansion model to parameterize TSLs, t… ▽ More This paper investigates joint device identification, channel estimation, and symbol detection for cooperative multi-satellite-enhanced random access, where orthogonal time-frequency space modulation with the large antenna array is utilized to combat the dynamics of the terrestrial-satellite links (TSLs). We introduce the generalized complex exponential basis expansion model to parameterize TSLs, thereby reducing the pilot overhead. By exploiting the block sparsity of the TSLs in the angular domain, a message passing algorithm is designed for initial channel estimation. Subsequently, we examine two cooperative modes to leverage the spatial diversity within satellite constellations: the centralized mode, where computations are performed at a high-power central server, and the distributed mode, where computations are offloaded to edge satellites with minimal signaling overhead. Specifically, in the centralized mode, device identification is achieved by aggregating backhaul information from edge satellites, and channel estimation and symbol detection are jointly enhanced through a structured approximate expectation propagation (AEP) algorithm. In the distributed mode, edge satellites share channel information and exchange soft information about data symbols, leading to a distributed version of AEP. The introduced basis expansion model for TSLs enables the efficient implementation of both centralized and distributed algorithms via fast Fourier transform. Simulation results demonstrate that proposed schemes significantly outperform conventional algorithms in terms of the activity error rate, the normalized mean squared error, and the symbol error rate. Notably, the distributed mode achieves performance comparable to the centralized mode with only two exchanges of soft information about data symbols within the constellation. △ Less

Submitted 5 August, 2024; originally announced August 2024.

Comments: This paper has been accepted by IEEE Journal on Selected Areas in Communications

Matching-Driven Deep Reinforcement Learning for Energy-Efficient Transmission Parameter Allocation in Multi-Gateway LoRa Networks

Authors: Ziqi Lin, Xu Zhang, Shimin Gong, Lanhua Li, Zhou Su, Bo Gu

Abstract: Long-range (LoRa) communication technology, distinguished by its low power consumption and long communication range, is widely used in the Internet of Things. Nevertheless, the LoRa MAC layer adopts pure ALOHA for medium access control, which may suffer from severe packet collisions as the network scale expands, consequently reducing the system energy efficiency (EE). To address this issue, it is… ▽ More Long-range (LoRa) communication technology, distinguished by its low power consumption and long communication range, is widely used in the Internet of Things. Nevertheless, the LoRa MAC layer adopts pure ALOHA for medium access control, which may suffer from severe packet collisions as the network scale expands, consequently reducing the system energy efficiency (EE). To address this issue, it is critical to carefully allocate transmission parameters such as the channel (CH), transmission power (TP) and spreading factor (SF) to each end device (ED). Owing to the low duty cycle and sporadic traffic of LoRa networks, evaluating the system EE under various parameter settings proves to be time-consuming. Consequently, we propose an analytical model aimed at calculating the system EE while fully considering the impact of multiple gateways, duty cycling, quasi-orthogonal SFs and capture effects. On this basis, we investigate a joint CH, SF and TP allocation problem, with the objective of optimizing the system EE for uplink transmissions. Due to the NP-hard complexity of the problem, the optimization problem is decomposed into two subproblems: CH assignment and SF/TP assignment. First, a matching-based algorithm is introduced to address the CH assignment subproblem. Then, an attention-based multiagent reinforcement learning technique is employed to address the SF/TP assignment subproblem for EDs allocated to the same CH, which reduces the number of learning agents to achieve fast convergence. The simulation outcomes indicate that the proposed approach converges quickly under various parameter settings and obtains significantly better system EE than baseline algorithms. △ Less

Submitted 17 July, 2024; originally announced July 2024.

A Single-Step Non-Autoregressive Automatic Speech Recognition Architecture with High Accuracy and Inference Speed

Authors: Ziyang Zhuang, Chenfeng Miao, Kun Zou, Shuai Gong, Ming Fang, Tao Wei, Zijian Li, Wei Hu, Shaojun Wang, Jing Xiao

Abstract: Non-autoregressive (NAR) automatic speech recognition (ASR) models predict tokens independently and simultaneously, bringing high inference speed. However, there is still a gap in the accuracy of the NAR models compared to the autoregressive (AR) models. To further narrow the gap between the NAR and AR models, we propose a single-step NAR ASR architecture with high accuracy and inference speed, ca… ▽ More Non-autoregressive (NAR) automatic speech recognition (ASR) models predict tokens independently and simultaneously, bringing high inference speed. However, there is still a gap in the accuracy of the NAR models compared to the autoregressive (AR) models. To further narrow the gap between the NAR and AR models, we propose a single-step NAR ASR architecture with high accuracy and inference speed, called EfficientASR. It uses an Index Mapping Vector (IMV) based alignment generator to generate alignments during training, and an alignment predictor to learn the alignments for inference. It can be trained end-to-end (E2E) with cross-entropy loss combined with alignment loss. The proposed EfficientASR achieves competitive results on the AISHELL-1 and AISHELL-2 benchmarks compared to the state-of-the-art (SOTA) models. Specifically, it achieves character error rates (CER) of 4.26%/4.62% on the AISHELL-1 dev/test dataset, which outperforms the SOTA AR Conformer with about 30x inference speedup. △ Less

Submitted 13 June, 2024; originally announced June 2024.

Robust Beamforming Design and Antenna Selection for Dynamic HRIS-aided Massive MIMO Systems

Authors: Jintao Wang, Binggui Zhou, Chengzhi Ma, Shiqi Gong, Guanghua Yang, Shaodan Ma

Abstract: In this paper, a dynamic hybrid active-passive reconfigurable intelligent surface (HRIS) is proposed to further enhance the massive multiple-input-multiple-output (MIMO) system, since it supports the dynamic placement of active and passive elements. Specifically, considering the impact of the hardware impairments (HWIs), we investigate the channel-aware configuration of the receive antennas at the… ▽ More In this paper, a dynamic hybrid active-passive reconfigurable intelligent surface (HRIS) is proposed to further enhance the massive multiple-input-multiple-output (MIMO) system, since it supports the dynamic placement of active and passive elements. Specifically, considering the impact of the hardware impairments (HWIs), we investigate the channel-aware configuration of the receive antennas at the base station (BS) and the active/passive elements at the HRIS to improve the reliability of system. To this end, we investigate the average mean-square-error (MSE) minimization problem for the HRIS-aided massive MIMO system by jointly optimizing the BS receive antenna selection matrix, the reflection phase coefficients, the reflection amplitude matrix, and the mode selection matrix of the HRIS under the power budget of the HRIS. To tackle the non-convexity and intractability of this problem, we first transform the binary and discrete variables into continuous ones, and then propose a penalty-based exact block coordinate descent (BCD) algorithm to solve these subproblems alternately. Numerical simulations demonstrate the great superiority of the proposed scheme over the conventional benchmark schemes. △ Less

Submitted 31 March, 2024; originally announced April 2024.

Comments: 5 pages, 2 figures

Primary Rate Maximization in Movable Antennas Empowered Symbiotic Radio Communications

Authors: Bin Lyu, Hao Liu, Wenqing Hong, Shimin Gong, Feng Tian

Abstract: In this paper, we propose a movable antenna (MA) empowered scheme for symbiotic radio (SR) communication systems. Specifically, multiple antennas at the primary transmitter (PT) can be flexibly moved to favorable locations to boost the channel conditions of the primary and secondary transmissions. The primary transmission is achieved by the active transmission from the PT to the primary user (PU),… ▽ More In this paper, we propose a movable antenna (MA) empowered scheme for symbiotic radio (SR) communication systems. Specifically, multiple antennas at the primary transmitter (PT) can be flexibly moved to favorable locations to boost the channel conditions of the primary and secondary transmissions. The primary transmission is achieved by the active transmission from the PT to the primary user (PU), while the backscatter device (BD) takes a ride over the incident signal from the PT to passively send the secondary signal to the PU. Under this setup, we consider a primary rate maximization problem by jointly optimizing the transmit beamforming and the positions of MAs at the PT under a practical bit error rate constraint on the secondary transmission. Then, an alternating optimization framework with the utilization of the successive convex approximation, semi-definite processing and simulated annealing (SA) modified particle swarm optimization (SA-PSO) methods is proposed to find the solution of the transmit beamforming and MAs' positions. Finally, numerical results are provided to demonstrate the performance improvement provided by the proposed MA empowered scheme and the proposed algorithm. △ Less

Submitted 22 March, 2024; originally announced March 2024.

Comments: To appear in IEEE VTC-Spring 2024. 6 Pages,5 figures

Edge-based Parametric Digital Twins for Intelligent Building Indoor Climate Modeling

Authors: Zhongjun Ni, Chi Zhang, Magnus Karlsson, Shaofang Gong

Abstract: Digital transformation in the built environment generates vast data for developing data-driven models to optimize building operations. This study presents an integrated solution utilizing edge computing, digital twins, and deep learning to enhance the understanding of climate in buildings. Parametric digital twins, created using an ontology, ensure consistent data representation across diverse ser… ▽ More Digital transformation in the built environment generates vast data for developing data-driven models to optimize building operations. This study presents an integrated solution utilizing edge computing, digital twins, and deep learning to enhance the understanding of climate in buildings. Parametric digital twins, created using an ontology, ensure consistent data representation across diverse service systems equipped by different buildings. Based on created digital twins and collected data, deep learning methods are employed to develop predictive models for identifying patterns in indoor climate and providing insights. Both the parametric digital twin and deep learning models are deployed on edge for low latency and privacy compliance. As a demonstration, a case study was conducted in a historic building in Östergötland, Sweden, to compare the performance of five deep learning architectures. The results indicate that the time-series dense encoder model exhibited strong competitiveness in performing multi-horizon forecasts of indoor temperature and relative humidity with low computational costs. △ Less

Submitted 7 March, 2024; originally announced March 2024.

Comments: 8 pages, 8 figures, accepted in the 20th IEEE International Conference on Factory Communication Systems

MSC Class: 68T07 ACM Class: I.5.4

Semantic Entropy Can Simultaneously Benefit Transmission Efficiency and Channel Security of Wireless Semantic Communications

Authors: Yankai Rong, Guoshun Nan, Minwei Zhang, Sihan Chen, Songtao Wang, Xuefei Zhang, Nan Ma, Shixun Gong, Zhaohui Yang, Qimei Cui, Xiaofeng Tao, Tony Q. S. Quek

Abstract: Recently proliferated deep learning-based semantic communications (DLSC) focus on how transmitted symbols efficiently convey a desired meaning to the destination. However, the sensitivity of neural models and the openness of wireless channels cause the DLSC system to be extremely fragile to various malicious attacks. This inspires us to ask a question: "Can we further exploit the advantages of tra… ▽ More Recently proliferated deep learning-based semantic communications (DLSC) focus on how transmitted symbols efficiently convey a desired meaning to the destination. However, the sensitivity of neural models and the openness of wireless channels cause the DLSC system to be extremely fragile to various malicious attacks. This inspires us to ask a question: "Can we further exploit the advantages of transmission efficiency in wireless semantic communications while also alleviating its security disadvantages?". Keeping this in mind, we propose SemEntropy, a novel method that answers the above question by exploring the semantics of data for both adaptive transmission and physical layer encryption. Specifically, we first introduce semantic entropy, which indicates the expectation of various semantic scores regarding the transmission goal of the DLSC. Equipped with such semantic entropy, we can dynamically assign informative semantics to Orthogonal Frequency Division Multiplexing (OFDM) subcarriers with better channel conditions in a fine-grained manner. We also use the entropy to guide semantic key generation to safeguard communications over open wireless channels. By doing so, both transmission efficiency and channel security can be simultaneously improved. Extensive experiments over various benchmarks show the effectiveness of the proposed SemEntropy. We discuss the reason why our proposed method benefits secure transmission of DLSC, and also give some interesting findings, e.g., SemEntropy can keep the semantic accuracy remain 95% with 60% less transmission. △ Less

Submitted 6 February, 2024; v1 submitted 5 February, 2024; originally announced February 2024.

Comments: 13 pages, 12 figures

Joint Beamforming Optimization and Mode Selection for RDARS-aided MIMO Systems

Authors: Jintao Wang, Chengzhi Ma, Shiqi Gong, Xi Yang, Shaodan Ma

Abstract: Considering the appealing distribution gains of distributed antenna systems (DAS) and passive gains of reconfigurable intelligent surface (RIS), a flexible reconfigurable architecture called reconfigurable distributed antenna and reflecting surface (RDARS) is proposed. RDARS encompasses DAS and RIS as two special cases and maintains the advantages of distributed antennas while reducing the hardwar… ▽ More Considering the appealing distribution gains of distributed antenna systems (DAS) and passive gains of reconfigurable intelligent surface (RIS), a flexible reconfigurable architecture called reconfigurable distributed antenna and reflecting surface (RDARS) is proposed. RDARS encompasses DAS and RIS as two special cases and maintains the advantages of distributed antennas while reducing the hardware cost by replacing some active antennas with low-cost passive reflecting surfaces. In this paper, we present a RDARS-aided uplink multi-user communication system and investigate the system transmission reliability with the newly proposed architecture. Specifically, in addition to the distribution gain and the reflection gain provided by the connection and reflection modes, respectively, we also consider the dynamic mode switching of each element which introduces an additional degree of freedom (DoF) and thus results in a selection gain. As such, we aim to minimize the total sum mean-square-error (MSE) of all data streams by jointly optimizing the receive beamforming matrix, the reflection phase shifts and the channel-aware placement of elements in the connection mode. To tackle this nonconvex problem with intractable binary and cardinality constraints, we propose an inexact block coordinate descent (BCD) based penalty dual decomposition (PDD) algorithm with the guaranteed convergence. Since the PDD algorithm usually suffers from high computational complexity, a low-complexity greedy-search-based alternating optimization (AO) algorithm is developed to yield a semi-closed-form solution with acceptable performance. Numerical results demonstrate the superiority of the proposed architecture compared to the conventional fully passive RIS or DAS. Furthermore, some insights about the practical implementation of RDARS are provided. △ Less

Submitted 20 January, 2024; originally announced January 2024.

Comments: 13 pages, 9 figures. This paper has been submitted to IEEE journal for possible publication

Dual-Functional MIMO Beamforming Optimization for RIS-Aided Integrated Sensing and Communication

Authors: Xin Zhao, Heng Liu, Shiqi Gong, Xin Ju, Chengwen Xing, Nan Zhao

Abstract: Aiming at providing wireless communication systems with environment-perceptive capacity, emerging integrated sensing and communication (ISAC) technologies face multiple difficulties, especially in balancing the performance trade-off between the communication and radar functions. In this paper, we introduce a reconfigurable intelligent surface (RIS) to assist both data transmission and target detec… ▽ More Aiming at providing wireless communication systems with environment-perceptive capacity, emerging integrated sensing and communication (ISAC) technologies face multiple difficulties, especially in balancing the performance trade-off between the communication and radar functions. In this paper, we introduce a reconfigurable intelligent surface (RIS) to assist both data transmission and target detection in a dual-functional ISAC system. To formulate a general optimization framework, diverse communication performance metrics have been taken into account including famous capacity maximization and mean-squared error (MSE) minimization. Whereas the target detection process is modeled as a general likelihood ratio test (GLRT) due to the practical limitations, and the monotonicity of the corresponding detection probability is proved. For the single-user and single-target (SUST) scenario, the minimum transmit power of the ISAC transceiver has been revealed. By exploiting the optimal conditions of the BS design, we validate that the BS is able to realize the maximum power allocation scheme and derive the optimal BS precoder in a semi-closed form. Moreover, an alternating direction method of multipliers (ADMM) based RIS design is proposed to address the optimization of unit-modulus RIS phase shifts. For the sake of further enhancing computational efficiency, we also develop a low-complexity RIS design based on Riemannian gradient descent. Furthermore, the ISAC transceiver design for the multiple-users and multiple-targets (MUMT) scenario is also investigated, where a zero-forcing (ZF) radar receiver is adopted to cancel the interferences. Then optimal BS precoder is derived under the maximum power allocation scheme, and the RIS phase shifts can be optimized by extending the proposed ADMM-based RIS design. Numerical simulation results verify the performance of our proposed transceiver designs. △ Less

Submitted 17 July, 2023; originally announced July 2023.

Comments: 30 pages, 8 figures, manuscript submitted to IEEE TCOM

Collective Large-scale Wind Farm Multivariate Power Output Control Based on Hierarchical Communication Multi-Agent Proximal Policy Optimization

Authors: Yubao Zhang, Xin Chen, Sumei Gong, Haojie Chen

Abstract: Wind power is becoming an increasingly important source of renewable energy worldwide. However, wind farm power control faces significant challenges due to the high system complexity inherent in these farms. A novel communication-based multi-agent deep reinforcement learning large-scale wind farm multivariate control is proposed to handle this challenge and maximize power output. A wind farm multi… ▽ More Wind power is becoming an increasingly important source of renewable energy worldwide. However, wind farm power control faces significant challenges due to the high system complexity inherent in these farms. A novel communication-based multi-agent deep reinforcement learning large-scale wind farm multivariate control is proposed to handle this challenge and maximize power output. A wind farm multivariate power model is proposed to study the influence of wind turbines (WTs) wake on power. The multivariate model includes axial induction factor, yaw angle, and tilt angle controllable variables. The hierarchical communication multi-agent proximal policy optimization (HCMAPPO) algorithm is proposed to coordinate the multivariate large-scale wind farm continuous controls. The large-scale wind farm is divided into multiple wind turbine aggregators (WTAs), and neighboring WTAs can exchange information through hierarchical communication to maximize the wind farm power output. Simulation results demonstrate that the proposed multivariate HCMAPPO can significantly increase wind farm power output compared to the traditional PID control, coordinated model-based predictive control, and multi-agent deep deterministic policy gradient algorithm. Particularly, the HCMAPPO algorithm can be trained with the environment based on the thirteen-turbine wind farm and effectively applied to larger wind farms. At the same time, there is no significant increase in the fatigue damage of the wind turbine blade from the wake control as the wind farm scale increases. The multivariate HCMAPPO control can realize the collective large-scale wind farm maximum power output. △ Less

Submitted 17 May, 2023; originally announced May 2023.

Leveraging Deep Learning and Digital Twins to Improve Energy Performance of Buildings

Authors: Zhongjun Ni, Chi Zhang, Magnus Karlsson, Shaofang Gong

Abstract: Digital transformation in buildings accumulates massive operational data, which calls for smart solutions to utilize these data to improve energy performance. This study has proposed a solution, namely Deep Energy Twin, for integrating deep learning and digital twins to better understand building energy use and identify the potential for improving energy efficiency. Ontology was adopted to create… ▽ More Digital transformation in buildings accumulates massive operational data, which calls for smart solutions to utilize these data to improve energy performance. This study has proposed a solution, namely Deep Energy Twin, for integrating deep learning and digital twins to better understand building energy use and identify the potential for improving energy efficiency. Ontology was adopted to create parametric digital twins to provide consistency of data format across different systems in a building. Based on created digital twins and collected data, deep learning methods were used for performing data analytics to identify patterns and provide insights for energy optimization. As a demonstration, a case study was conducted in a public historic building in Norrköping, Sweden, to compare the performance of state-of-the-art deep learning architectures in building energy forecasting. △ Less

Submitted 16 May, 2023; v1 submitted 8 May, 2023; originally announced May 2023.

Comments: 6 pages, 5 figures, accepted in the 3rd IEEE International Conference on Industrial Electronics for Sustainable Energy Systems

MSC Class: 68T07 ACM Class: I.5.4

Robust Secure Transmission for Active RIS Enabled Symbiotic Radio Multicast Communications

Authors: Bin Lyu, Chao Zhou, Shimin Gong, Dinh Thai Hoang, Ying-chang Liang

Abstract: In this paper, we propose a robust secure transmission scheme for an active reconfigurable intelligent surface (RIS) enabled symbiotic radio (SR) system in the presence of multiple eavesdroppers (Eves). In the considered system, the active RIS is adopted to enable the secure transmission of primary signals from the primary transmitter to multiple primary users in a multicasting manner, and simulta… ▽ More In this paper, we propose a robust secure transmission scheme for an active reconfigurable intelligent surface (RIS) enabled symbiotic radio (SR) system in the presence of multiple eavesdroppers (Eves). In the considered system, the active RIS is adopted to enable the secure transmission of primary signals from the primary transmitter to multiple primary users in a multicasting manner, and simultaneously achieve its own information delivery to the secondary user by riding over the primary signals. Taking into account the imperfect channel state information (CSI) related with Eves, we formulate the system power consumption minimization problem by optimizing the transmit beamforming and reflection beamforming for the bounded and statistical CSI error models, taking the worst-case SNR constraints and the SNR outage probability constraints at the Eves into considerations, respectively. Specifically, the S-Procedure and the Bernstein-Type Inequality are implemented to approximately transform the worst-case SNR and the SNR outage probability constraints into tractable forms, respectively. After that, the formulated problems can be solved by the proposed alternating optimization (AO) algorithm with the semi-definite relaxation and sequential rank-one constraint relaxation techniques. Numerical results show that the proposed active RIS scheme can reduce up to 27.0% system power consumption compared to the passive RIS. △ Less

Submitted 13 April, 2023; v1 submitted 5 April, 2023; originally announced April 2023.

Comments: 32 Pages, 12 figures, accepted to IEEE Transactions on Wireless Communications

Bayesian Optimization Enhanced Deep Reinforcement Learning for Trajectory Planning and Network Formation in Multi-UAV Networks

Authors: Shimin Gong, Meng Wang, Bo Gu, Wenjie Zhang, Dinh Thai Hoang, Dusit Niyato

Abstract: In this paper, we employ multiple UAVs coordinated by a base station (BS) to help the ground users (GUs) to offload their sensing data. Different UAVs can adapt their trajectories and network formation to expedite data transmissions via multi-hop relaying. The trajectory planning aims to collect all GUs' data, while the UAVs' network formation optimizes the multi-hop UAV network topology to minimi… ▽ More In this paper, we employ multiple UAVs coordinated by a base station (BS) to help the ground users (GUs) to offload their sensing data. Different UAVs can adapt their trajectories and network formation to expedite data transmissions via multi-hop relaying. The trajectory planning aims to collect all GUs' data, while the UAVs' network formation optimizes the multi-hop UAV network topology to minimize the energy consumption and transmission delay. The joint network formation and trajectory optimization is solved by a two-step iterative approach. Firstly, we devise the adaptive network formation scheme by using a heuristic algorithm to balance the UAVs' energy consumption and data queue size. Then, with the fixed network formation, the UAVs' trajectories are further optimized by using multi-agent deep reinforcement learning without knowing the GUs' traffic demands and spatial distribution. To improve the learning efficiency, we further employ Bayesian optimization to estimate the UAVs' flying decisions based on historical trajectory points. This helps avoid inefficient action explorations and improves the convergence rate in the model training. The simulation results reveal close spatial-temporal couplings between the UAVs' trajectory planning and network formation. Compared with several baselines, our solution can better exploit the UAVs' cooperation in data offloading, thus improving energy efficiency and delay performance. △ Less

Submitted 27 December, 2022; originally announced December 2022.

Comments: 15 pages, 10 figures, 2 algorithms

Hierarchical Deep Reinforcement Learning for Age-of-Information Minimization in IRS-aided and Wireless-powered Wireless Networks

Authors: Shimin Gong, Leiyang Cui, Bo Gu, Bin Lyu, Dinh Thai Hoang, Dusit Niyato

Abstract: In this paper, we focus on a wireless-powered sensor network coordinated by a multi-antenna access point (AP). Each node can generate sensing information and report the latest information to the AP using the energy harvested from the AP's signal beamforming. We aim to minimize the average age-of-information (AoI) by adapting the nodes' transmission scheduling and the transmission control strategie… ▽ More In this paper, we focus on a wireless-powered sensor network coordinated by a multi-antenna access point (AP). Each node can generate sensing information and report the latest information to the AP using the energy harvested from the AP's signal beamforming. We aim to minimize the average age-of-information (AoI) by adapting the nodes' transmission scheduling and the transmission control strategies jointly. To reduce the transmission delay, an intelligent reflecting surface (IRS) is used to enhance the channel conditions by controlling the AP's beamforming vector and the IRS's phase shifting matrix. Considering dynamic data arrivals at different sensing nodes, we propose a hierarchical deep reinforcement learning (DRL) framework to for AoI minimization in two steps. The users' transmission scheduling is firstly determined by the outer-loop DRL approach, e.g. the DQN or PPO algorithm, and then the inner-loop optimization is used to adapt either the uplink information transmission or downlink energy transfer to all nodes. A simple and efficient approximation is also proposed to reduce the inner-loop rum time overhead. Numerical results verify that the hierarchical learning framework outperforms typical baselines in terms of the average AoI and proportional fairness among different nodes. △ Less

Submitted 27 December, 2022; originally announced December 2022.

Comments: 31 pages, 6 figures, 2 tables, 3 algorithms

Individualized Conditioning and Negative Distances for Speaker Separation

Authors: Tao Sun, Nidal Abuhajar, Shuyu Gong, Zhewei Wang, Charles D. Smith, Xianhui Wang, Li Xu, Jundong Liu

Abstract: Speaker separation aims to extract multiple voices from a mixed signal. In this paper, we propose two speaker-aware designs to improve the existing speaker separation solutions. The first model is a speaker conditioning network that integrates speech samples to generate individualized speaker conditions, which then provide informed guidance for a separation module to produce well-separated outputs… ▽ More Speaker separation aims to extract multiple voices from a mixed signal. In this paper, we propose two speaker-aware designs to improve the existing speaker separation solutions. The first model is a speaker conditioning network that integrates speech samples to generate individualized speaker conditions, which then provide informed guidance for a separation module to produce well-separated outputs. The second design aims to reduce non-target voices in the separated speech. To this end, we propose negative distances to penalize the appearance of any non-target voice in the channel outputs, and positive distances to drive the separated voices closer to the clean targets. We explore two different setups, weighted-sum and triplet-like, to integrate these two distances to form a combined auxiliary loss for the separation networks. Experiments conducted on LibriMix demonstrate the effectiveness of our proposed models. △ Less

Submitted 12 October, 2022; originally announced October 2022.

Comments: Accepted to ICMLA 2022

RIS-Aided MIMO Systems with Hardware Impairments: Robust Beamforming Design and Analysis

Authors: Jintao Wang, Shiqi Gong, Qingqing Wu, Shaodan Ma

Abstract: Reconfigurable intelligent surface (RIS) has been anticipated to be a novel cost-effective technology to improve the performance of future wireless systems. In this paper, we investigate a practical RIS-aided multiple-input-multiple-output (MIMO) system in the presence of transceiver hardware impairments, RIS phase noise and imperfect channel state information (CSI). Joint design of the MIMO trans… ▽ More Reconfigurable intelligent surface (RIS) has been anticipated to be a novel cost-effective technology to improve the performance of future wireless systems. In this paper, we investigate a practical RIS-aided multiple-input-multiple-output (MIMO) system in the presence of transceiver hardware impairments, RIS phase noise and imperfect channel state information (CSI). Joint design of the MIMO transceiver and RIS reflection matrix to minimize the total average mean-square-error (MSE) of all data streams is particularly considered. This joint design problem is non-convex and challenging to solve due to the newly considered practical imperfections. To tackle the issue, we first analyze the total average MSE by incorporating the impacts of the above system imperfections. Then, in order to handle the tightly coupled optimization variables and non-convex NP-hard constraints, an efficient iterative algorithm based on alternating optimization (AO) framework is proposed with guaranteed convergence, where each subproblem admits a closed-form optimal solution by leveraging the majorization-minimization (MM) technique. Moreover, via exploiting the special structure of the unit-modulus constraints, we propose a modified Riemannian gradient ascent (RGA) algorithm for the discrete RIS phase shift optimization. Furthermore, the optimality of the proposed algorithm is validated under line-of-sight (LoS) channel conditions, and the irreducible MSE floor effect induced by imperfections of both hardware and CSI is also revealed in the high signal-to-noise ratio (SNR) regime. Numerical results show the superior MSE performance of our proposed algorithm over the adopted benchmark schemes, and demonstrate that increasing the number of RIS elements is not always beneficial under the above system imperfections. △ Less

Submitted 22 March, 2023; v1 submitted 23 September, 2022; originally announced September 2022.

Comments: 16 pages, 6 figures. Accepted by IEEE Transactions on Wireless Communications

Hosting Capacity Approach

Authors: Sicheng Gong, Vladimir Ćuk, Tiago Castelo de Oliveira, J. F. G. Cobben

Abstract: This chapter proposes an evolved concept of "hosting capacity" using the term of "feasible region". Through converting the grid model into a more compact one, "hosting capacity region" not only is promising to further exploit the grid potential for power delivery, but also benefits grid operation feasibility investigation with concise formulas. The hosting capacity region assessment schemes are ex… ▽ More This chapter proposes an evolved concept of "hosting capacity" using the term of "feasible region". Through converting the grid model into a more compact one, "hosting capacity region" not only is promising to further exploit the grid potential for power delivery, but also benefits grid operation feasibility investigation with concise formulas. The hosting capacity region assessment schemes are exploited as well. Facing the derived hosting capacity, originally complicated energy storage optimization problems can be represented algebraically, which is more efficient and friendly for computer processing. Case studies based on a 10.5kV Dutch grid have been implemented, eventually confirming the validity of relevant assessment and optimization methods. △ Less

Submitted 25 July, 2022; originally announced July 2022.

Comments: 24 pages, 17 figures

NTIRE 2022 Challenge on Efficient Super-Resolution: Methods and Results

Authors: Yawei Li, Kai Zhang, Radu Timofte, Luc Van Gool, Fangyuan Kong, Mingxi Li, Songwei Liu, Zongcai Du, Ding Liu, Chenhui Zhou, Jingyi Chen, Qingrui Han, Zheyuan Li, Yingqi Liu, Xiangyu Chen, Haoming Cai, Yu Qiao, Chao Dong, Long Sun, Jinshan Pan, Yi Zhu, Zhikai Zong, Xiaoxiao Liu, Zheng Hui, Tao Yang , et al. (86 additional authors not shown)

Abstract: This paper reviews the NTIRE 2022 challenge on efficient single image super-resolution with focus on the proposed solutions and results. The task of the challenge was to super-resolve an input image with a magnification factor of $\times$4 based on pairs of low and corresponding high resolution images. The aim was to design a network for single image super-resolution that achieved improvement of e… ▽ More This paper reviews the NTIRE 2022 challenge on efficient single image super-resolution with focus on the proposed solutions and results. The task of the challenge was to super-resolve an input image with a magnification factor of $\times$4 based on pairs of low and corresponding high resolution images. The aim was to design a network for single image super-resolution that achieved improvement of efficiency measured according to several metrics including runtime, parameters, FLOPs, activations, and memory consumption while at least maintaining the PSNR of 29.00dBでしべる on DIV2K validation set. IMDN is set as the baseline for efficiency measurement. The challenge had 3 tracks including the main track (runtime), sub-track one (model complexity), and sub-track two (overall performance). In the main track, the practical runtime performance of the submissions was evaluated. The rank of the teams were determined directly by the absolute value of the average runtime on the validation set and test set. In sub-track one, the number of parameters and FLOPs were considered. And the individual rankings of the two metrics were summed up to determine a final ranking in this track. In sub-track two, all of the five metrics mentioned in the description of the challenge including runtime, parameter count, FLOPs, activations, and memory consumption were considered. Similar to sub-track one, the rankings of five metrics were summed up to determine a final ranking. The challenge had 303 registered participants, and 43 teams made valid submissions. They gauge the state-of-the-art in efficient single image super-resolution. △ Less

Submitted 11 May, 2022; originally announced May 2022.

Comments: Validation code of the baseline model is available at https://github.com/ofsoundof/IMDN. Validation of all submitted models is available at https://github.com/ofsoundof/NTIRE2022_ESR

Connected and Automated Vehicle Distributed Control for On-ramp Merging Scenario: A Virtual Rotation Approach

Authors: Tianyi Chen, Meng Wang, Siyuan Gong, Yang Zhou, Bin Ran

Abstract: In this study, we propose a rotation-based connected automated vehicle (CAV) distributed cooperative control strategy for an on-ramp merging scenario. By assuming the mainline and ramp line are straight, we firstly design a virtual rotation approach that transfers the merging problem to a virtual car following (CF) problem to reduce the complexity and dimension of the cooperative CAVs merging cont… ▽ More In this study, we propose a rotation-based connected automated vehicle (CAV) distributed cooperative control strategy for an on-ramp merging scenario. By assuming the mainline and ramp line are straight, we firstly design a virtual rotation approach that transfers the merging problem to a virtual car following (CF) problem to reduce the complexity and dimension of the cooperative CAVs merging control. Based on this concept, a multiple-predecessor virtual CF model and a unidirectional multi-leader communication topology are developed to determine the longitudinal behavior of each CAV. Specifically, we exploit a distributed feedback and feedforward longitudinal controller in preparation for actively generating gaps for merging CAVs, reducing the voids caused by merging, and ensuring safety and traffic efficiency during the process. To ensure the disturbance attenuation property of this system, practical string stability is mathematically proved for the virtual CF controllers to prohibit the traffic oscillation amplification through the traffic stream. Moreover, as a provision for extending the virtual CF application scenarios of any curvy ramp geometry, we utilize a curvilinear coordinate to model the two-dimensional merging control, and further design a local lateral controller based on an extended linear-quadratic regulator to regulate the position deviation and angular deviation of the lane centerlines. For the purpose of systematically evaluating the control performance of the proposed methods, numerical simulation experiments are conducted. As the results indicate, the proposed controllers can actively reduce the void and meanwhile guarantee the damping of traffic oscillations in the merging control area. △ Less

Submitted 18 January, 2022; v1 submitted 28 March, 2021; originally announced March 2021.

Comments: 30 pages, 15 figures, 2 tables

Deep Learning in EEG: Advance of the Last Ten-Year Critical Period

Authors: Shu Gong, Kaibo Xing, Andrzej Cichocki, Junhua Li

Abstract: Deep learning has achieved excellent performance in a wide range of domains, especially in speech recognition and computer vision. Relatively less work has been done for EEG, but there is still significant progress attained in the last decade. Due to the lack of a comprehensive and topic widely covered survey for deep learning in EEG, we attempt to summarize recent progress to provide an overview,… ▽ More Deep learning has achieved excellent performance in a wide range of domains, especially in speech recognition and computer vision. Relatively less work has been done for EEG, but there is still significant progress attained in the last decade. Due to the lack of a comprehensive and topic widely covered survey for deep learning in EEG, we attempt to summarize recent progress to provide an overview, as well as perspectives for future developments. We first briefly mention the artifacts removal for EEG signal and then introduce deep learning models that have been utilized in EEG processing and classification. Subsequently, the applications of deep learning in EEG are reviewed by categorizing them into groups such as brain-computer interface, disease detection, and emotion recognition. They are followed by the discussion, in which the pros and cons of deep learning are presented and future directions and challenges for deep learning in EEG are proposed. We hope that this paper could serve as a summary of past work for deep learning in EEG and the beginning of further developments and achievements of EEG studies based on deep learning. △ Less

Submitted 20 May, 2021; v1 submitted 22 November, 2020; originally announced November 2020.

Comments: Accepted for publication in the IEEE Transactions on Cognitive and Developmental Systems

Journal ref: IEEE Transactions on Cognitive and Developmental Systems, 2021

Beamforming Optimization for IRS-Aided Communications with Transceiver Hardware Impairments

Authors: Hong Shen, Wei Xu, Shulei Gong, Chunming Zhao, Derrick Wing Kwan Ng

Abstract: In this paper, we focus on intelligent reflecting surface (IRS) assisted multi-antenna communications with transceiver hardware impairments encountered in practice. In particular, we aim to maximize the received signal-to-noise ratio (SNR) taking into account the impact of hardware impairments, where the source transmit beamforming and the IRS reflect beamforming are jointly designed under the pro… ▽ More In this paper, we focus on intelligent reflecting surface (IRS) assisted multi-antenna communications with transceiver hardware impairments encountered in practice. In particular, we aim to maximize the received signal-to-noise ratio (SNR) taking into account the impact of hardware impairments, where the source transmit beamforming and the IRS reflect beamforming are jointly designed under the proposed optimization framework. To circumvent the non-convexity of the formulated design problem, we first derive a closed-form optimal solution to the source transmit beamforming. Then, for the optimization of IRS reflect beamforming, we obtain an upper bound to the optimal objective value via solving a single convex problem. A low-complexity minorization-maximization (MM) algorithm was developed to approach the upper bound. Simulation results demonstrate that the proposed beamforming design is more robust to the hardware impairments than that of the conventional SNR maximized scheme. Moreover, compared to the scenario without deploying an IRS, the performance gain brought by incorporating the hardware impairments is more evident for the IRS-aided communications. △ Less

Submitted 21 October, 2020; originally announced October 2020.

Comments: Accepted by IEEE Transactions on Communications

3D Facial Matching by Spiral Convolutional Metric Learning and a Biometric Fusion-Net of Demographic Properties

Authors: Soha Sadat Mahdi, Nele Nauwelaers, Philip Joris, Giorgos Bouritsas, Shunwang Gong, Sergiy Bokhnyak, Susan Walsh, Mark D. Shriver, Michael Bronstein, Peter Claes, .

Abstract: Face recognition is a widely accepted biometric verification tool, as the face contains a lot of information about the identity of a person. In this study, a 2-step neural-based pipeline is presented for matching 3D facial shape to multiple DNA-related properties (sex, age, BMI and genomic background). The first step consists of a triplet loss-based metric learner that compresses facial shape into… ▽ More Face recognition is a widely accepted biometric verification tool, as the face contains a lot of information about the identity of a person. In this study, a 2-step neural-based pipeline is presented for matching 3D facial shape to multiple DNA-related properties (sex, age, BMI and genomic background). The first step consists of a triplet loss-based metric learner that compresses facial shape into a lower dimensional embedding while preserving information about the property of interest. Most studies in the field of metric learning have only focused on 2D Euclidean data. In this work, geometric deep learning is employed to learn directly from 3D facial meshes. To this end, spiral convolutions are used along with a novel mesh-sampling scheme that retains uniformly sampled 3D points at different levels of resolution. The second step is a multi-biometric fusion by a fully connected neural network. The network takes an ensemble of embeddings and property labels as input and returns genuine and imposter scores. Since embeddings are accepted as an input, there is no need to train classifiers for the different properties and available data can be used more efficiently. Results obtained by a 10-fold cross-validation for biometric verification show that combining multiple properties leads to stronger biometric systems. Furthermore, the proposed neural-based pipeline outperforms a linear baseline, which consists of principal component analysis, followed by classification with linear support vector machines and a Naive Bayes-based score-fuser. △ Less

Submitted 16 October, 2020; v1 submitted 10 September, 2020; originally announced September 2020.

Comments: Accepted at International Conference on Pattern Recognition (ICPR 2020). Mahdi and Nauwelaers contributed equally and are ordered alphabetically

Optimization-driven Machine Learning for Intelligent Reflecting Surfaces Assisted Wireless Networks

Authors: Shimin Gong, Jiaye Lin, Jinbei Zhang, Dusit Niyato, Dong In Kim, Mohsen Guizani

Abstract: Intelligent reflecting surface (IRS) has been recently employed to reshape the wireless channels by controlling individual scattering elements' phase shifts, namely, passive beamforming. Due to the large size of scattering elements, the passive beamforming is typically challenged by the high computational complexity and inexact channel information. In this article, we focus on machine learning (ML… ▽ More Intelligent reflecting surface (IRS) has been recently employed to reshape the wireless channels by controlling individual scattering elements' phase shifts, namely, passive beamforming. Due to the large size of scattering elements, the passive beamforming is typically challenged by the high computational complexity and inexact channel information. In this article, we focus on machine learning (ML) approaches for performance maximization in IRS-assisted wireless networks. In general, ML approaches provide enhanced flexibility and robustness against uncertain information and imprecise modeling. Practical challenges still remain mainly due to the demand for a large dataset in offline training and slow convergence in online learning. These observations motivate us to design a novel optimization-driven ML framework for IRS-assisted wireless networks, which takes both advantages of the efficiency in model-based optimization and the robustness in model-free ML approaches. By splitting the decision variables into two parts, one part is obtained by the outer-loop ML approach, while the other part is optimized efficiently by solving an approximate problem. Numerical results verify that the optimization-driven ML approach can improve both the convergence and the reward performance compared to conventional model-free learning approaches. △ Less

Submitted 29 August, 2020; originally announced August 2020.

Comments: submitted to IEEE Communications Magazine

Optimization-driven Hierarchical Learning Framework for Wireless Powered Backscatter-aided Relay Communications

Authors: Shimin Gong, Yuze Zou, Jing Xu, Dinh Thai Hoang, Bin Lyu, Dusit Niyato

Abstract: In this paper, we employ multiple wireless-powered relays to assist information transmission from a multi-antenna access point to a single-antenna receiver. The wireless relays can operate in either the passive mode via backscatter communications or the active mode via RF communications, depending on their channel conditions and energy states. We aim to maximize the overall throughput by jointly o… ▽ More In this paper, we employ multiple wireless-powered relays to assist information transmission from a multi-antenna access point to a single-antenna receiver. The wireless relays can operate in either the passive mode via backscatter communications or the active mode via RF communications, depending on their channel conditions and energy states. We aim to maximize the overall throughput by jointly optimizing the access point's beamforming and the relays' radio modes and operating parameters. Due to the non-convex and combinatorial structure, we develop a novel optimization-driven hierarchical deep deterministic policy gradient (H-DDPG) approach to adapt the beamforming and relay strategies dynamically. The optimization-driven H-DDPG algorithm firstly decomposes the binary relay mode selection into the outer-loop deep Q-network (DQN) algorithm and then optimizes the continuous beamforming and relaying parameters by using the inner-loop DDPG algorithm. Secondly, to improve the learning efficiency, we integrate the model-based optimization into the DDPG framework by providing a better-informed target estimation for DNN training. Simulation results reveal that these two special designs ensure a more stable learning and achieve a higher reward performance, up to nearly 20%, compared to the conventional DDPG approach. △ Less

Submitted 4 August, 2020; originally announced August 2020.

Comments: 29 pages, 7 figures, 2 tables, submitted to IEEE Transactions on Wireless Communications

Optimization-driven Deep Reinforcement Learning for Robust Beamforming in IRS-assisted Wireless Communications

Authors: Jiaye Lin, Yuze Zou, Xiaoru Dong, Shimin Gong, Dinh Thai Hoang, Dusit Niyato

Abstract: Intelligent reflecting surface (IRS) is a promising technology to assist downlink information transmissions from a multi-antenna access point (AP) to a receiver. In this paper, we minimize the AP's transmit power by a joint optimization of the AP's active beamforming and the IRS's passive beamforming. Due to uncertain channel conditions, we formulate a robust power minimization problem subject to… ▽ More Intelligent reflecting surface (IRS) is a promising technology to assist downlink information transmissions from a multi-antenna access point (AP) to a receiver. In this paper, we minimize the AP's transmit power by a joint optimization of the AP's active beamforming and the IRS's passive beamforming. Due to uncertain channel conditions, we formulate a robust power minimization problem subject to the receiver's signal-to-noise ratio (SNR) requirement and the IRS's power budget constraint. We propose a deep reinforcement learning (DRL) approach that can adapt the beamforming strategies from past experiences. To improve the learning performance, we derive a convex approximation as a lower bound on the robust problem, which is integrated into the DRL framework and thus promoting a novel optimization-driven deep deterministic policy gradient (DDPG) approach. In particular, when the DDPG algorithm generates a part of the action (e.g., passive beamforming), we can use the model-based convex approximation to optimize the other part (e.g., active beamforming) of the action more efficiently. Our simulation results demonstrate that the optimization-driven DDPG algorithm can improve both the learning rate and reward performance significantly compared to the conventional model-free DDPG algorithm. △ Less

Submitted 24 May, 2020; originally announced May 2020.

Robust Beamforming for IRS-assisted Wireless Communications under Channel Uncertainty

Authors: Yongchang Deng, Yuze Zou, Shimin Gong, Bin Lyu, Dinh Thai Hoang, Dusit Niyato

Abstract: In this paper, we consider IRS-assisted transmissions from a multi-antenna access point (AP) to a receiver with uncertain channel information. By adjusting the magnitude of reflecting coefficients, the IRS can sustain its operations by harvesting energy from the AP's signal beamforming. Considering channel estimation errors, we model both the AP-IRS channel and the AP-IRS-receiver as a cascaded ch… ▽ More In this paper, we consider IRS-assisted transmissions from a multi-antenna access point (AP) to a receiver with uncertain channel information. By adjusting the magnitude of reflecting coefficients, the IRS can sustain its operations by harvesting energy from the AP's signal beamforming. Considering channel estimation errors, we model both the AP-IRS channel and the AP-IRS-receiver as a cascaded channel by norm-based uncertainty sets. This allows us to formulate a robust optimization problem to minimize the AP's transmit power, subject to the user's worst-case data rate requirement and the IRS's worst-case power budget constraint. Instead of using the alternating optimization method, we firstly propose a heuristic scheme to decompose the IRS's {phase shift} optimization and the AP's active beamforming. Based on semidefinite relaxations of the worst-case constraints, we further devise an iterative algorithm to optimize the AP's transmit beamforming and the magnitude of the IRS's reflecting coefficients efficiently by solving a set of semidefinite programs. Simulation results reveal that the AP requires a higher transmit power to deal with the channel uncertainty. Moreover, the negative effect of channel uncertainty can be alleviated by using a larger-size IRS. △ Less

Submitted 14 May, 2020; originally announced May 2020.

Comments: 18 pages, 6 figures, submitted to IEEE Globecom 2020

Optimized Energy and Information Relaying in Self-Sustainable IRS-Empowered WPCN

Authors: Bin Lyu, Parisa Ramezani, Dinh Thai Hoang, Shimin Gong, Zhen Yang, Abbas Jamalipour

Abstract: This paper proposes a hybrid-relaying scheme empowered by a self-sustainable intelligent reflecting surface (IRS) in a wireless powered communication network (WPCN), to simultaneously improve the performance of downlink energy transfer (ET) from a hybrid access point (HAP) to multiple users and uplink information transmission (IT) from users to the HAP. We propose time-switching (TS) and power-spl… ▽ More This paper proposes a hybrid-relaying scheme empowered by a self-sustainable intelligent reflecting surface (IRS) in a wireless powered communication network (WPCN), to simultaneously improve the performance of downlink energy transfer (ET) from a hybrid access point (HAP) to multiple users and uplink information transmission (IT) from users to the HAP. We propose time-switching (TS) and power-splitting (PS) schemes for the IRS, where the IRS can harvest energy from the HAP's signals by switching between energy harvesting and signal reflection in the TS scheme or adjusting its reflection amplitude in the PS scheme. For both the TS and PS schemes, we formulate the sum-rate maximization problems by jointly optimizing the IRS's phase shifts for both ET and IT and network resource allocation. To address each problem's non-convexity, we propose a two-step algorithm to obtain the near-optimal solution with high accuracy. To show the structure of resource allocation, we also investigate the optimal solutions for the schemes with random phase shifts. Through numerical results, we show that our proposed schemes can achieve significant system sum-rate gain compared to the baseline scheme without IRS. △ Less

Submitted 30 September, 2020; v1 submitted 6 April, 2020; originally announced April 2020.

Comments: To appear in IEEE Transactions on Communications

Deep Reinforcement Learning for Backscatter-Aided Data Offloading in Mobile Edge Computing

Authors: Shimin Gong, Yutong Xie, Jing Xu, Dusit Niyato, Ying-Chang Liang

Abstract: Wireless network optimization has been becoming very challenging as the problem size and complexity increase tremendously, due to close couplings among network entities with heterogeneous service and resource requirements. By continuously interacting with the environment, deep reinforcement learning (DRL) provides a mechanism for different network entities to build knowledge and make autonomous de… ▽ More Wireless network optimization has been becoming very challenging as the problem size and complexity increase tremendously, due to close couplings among network entities with heterogeneous service and resource requirements. By continuously interacting with the environment, deep reinforcement learning (DRL) provides a mechanism for different network entities to build knowledge and make autonomous decisions to improve network performance. In this article, we first review typical DRL approaches and recent enhancements. We then discuss the applications of DRL for mobile edge computing (MEC), which can be used for the low-power IoT devices, e.g., wireless sensors in healthcare monitoring, to offload computation workload to nearby MEC servers. To balance power consumption in offloading and computation, we propose a novel hybrid offloading model that exploits the complement operations of RF communications and low-power backscatter communications. The DRL framework is then customized to optimize the transmission scheduling and workload allocation in two communications technologies, which is shown to enhance the offloading performance significantly compared with existing schemes. △ Less

Submitted 28 January, 2020; originally announced January 2020.

Comments: 15 pages, 6 figures, 15 references

IRS-based Wireless Jamming Attacks: When Jammers can Attack without Power

Authors: Bin Lyu, Dinh Thai Hoang, Shimin Gong, Dusit Niyato, Dong In Kim

Abstract: This paper proposes to use Intelligent Reflecting Surface (IRS) as a green jammer to attack a legitimate communication without using any internal energy to generate jamming signals. In particular, the IRS is used to intelligently reflect the signals from the legitimate transmitter to the legitimate receiver (LR) to guarantee that the received signals from direct and reflecting links can be added d… ▽ More This paper proposes to use Intelligent Reflecting Surface (IRS) as a green jammer to attack a legitimate communication without using any internal energy to generate jamming signals. In particular, the IRS is used to intelligently reflect the signals from the legitimate transmitter to the legitimate receiver (LR) to guarantee that the received signals from direct and reflecting links can be added destructively, which thus diminishes the Signal-to-Interference-plus-Noise Ratio (SINR) at the LR. To minimize the received signal power at the LR, we consider the joint optimization of magnitudes of reflection coefficients and discrete phase shifts at the IRS. Based on the block coordinate descent, semidefinite relaxation, and Gaussian randomization techniques, the solution can be obtained efficiently. Through simulation results, we show that by using the IRS-based jammer, we can reduce the signal power received at the LR by up to 99\%. Interestingly, the performance of the proposed IRS-based jammer is even better than that of the conventional active jamming attacks in some scenarios. △ Less

Submitted 29 May, 2020; v1 submitted 6 January, 2020; originally announced January 2020.

Comments: 12 pages, 5 figures

"Borrowing Arrows with Thatched Boats": The Art of Defeating Reactive Jammers in IoT Networks

Authors: Dinh Thai Hoang, Diep N. Nguyen, Mohammad Abu Alsheikh, Shimin Gong, Eryk Dutkiewicz, Dusit Niyato, Zhu Han

Abstract: In this article, we introduce a novel deception strategy which is inspired by the "Borrowing Arrows with Thatched Boats", one of the most famous military tactics in the history, in order to defeat reactive jamming attacks for low-power IoT networks. Our proposed strategy allows resource-constrained IoT devices to be able to defeat powerful reactive jammers by leveraging their own jamming signals.… ▽ More In this article, we introduce a novel deception strategy which is inspired by the "Borrowing Arrows with Thatched Boats", one of the most famous military tactics in the history, in order to defeat reactive jamming attacks for low-power IoT networks. Our proposed strategy allows resource-constrained IoT devices to be able to defeat powerful reactive jammers by leveraging their own jamming signals. More specifically, by stimulating the jammer to attack the channel through transmitting fake transmissions, the IoT system can not only undermine the jammer's power, but also harvest energy or utilize jamming signals as a communication means to transmit data through using RF energy harvesting and ambient backscatter techniques, respectively. Furthermore, we develop a low-cost deep reinforcement learning framework that enables the hardware-constrained IoT device to quickly obtain an optimal defense policy without requiring any information about the jammer in advance. Simulation results reveal that our proposed framework can not only be very effective in defeating reactive jamming attacks, but also leverage jammer's power to enhance system performance for the IoT network. △ Less

Submitted 23 December, 2019; originally announced December 2019.

Comments: 16 pages, 5 figures, magazine

Majorization-Minimization Aided Hybrid Transceivers for MIMO Interference Channels

Authors: Shiqi Gong, Chengwen Xing, Vincent K. N. Lau, Sheng Chen, Lajos Hanzo

Abstract: The potential of deploying large-scale antenna arrays in future wireless systems has stimulated extensive research on hybrid transceiver designs aiming to approximate the optimal fully-digital schemes with much reduced hardware cost and signal processing complexity. Generally, this hybrid transceiver structure requires a joint design of analog and digital processing to enable both beamsteering and… ▽ More The potential of deploying large-scale antenna arrays in future wireless systems has stimulated extensive research on hybrid transceiver designs aiming to approximate the optimal fully-digital schemes with much reduced hardware cost and signal processing complexity. Generally, this hybrid transceiver structure requires a joint design of analog and digital processing to enable both beamsteering and spatial multiplexing gains. In this paper, we develop various weighted mean-square-error minimization (WMMSE) based hybrid transceiver designs over multiple-input multiple-output (MIMO) interference channels at both millimeter wave (mmWave) and microwave frequencies. Firstly, a heuristic joint design of hybrid precoder and combiner using alternating optimization is proposed, in which the majorization-minimization (MM) method is utilized to design the analog precoder and combiner with unit-modulus constraints. It is validated that this scheme achieves the comparable performance to the WMMSE fully-digital solution. To further reduce the complexity, a phase projection-based two-stage scheme is proposed to decouple the designs of analog and digital precoder combiner. Secondly, inspired by the fully-digital solutions based on the block-diagonalization zero-forcing (BD-ZF) and signal-to-leakage-plus-noise ratio (SLNR) criteria, low-complexity MMbased BD-ZF and SLNR hybrid designs are proposed to well approximate the corresponding fully-digital solutions. Thirdly, the partially-connected hybrid structure for reducing system hardware cost and power consumption is considered, for which the MM-based alternating optimization still works. Numerical results demonstrate the similar or superior performance of all the above proposed schemes over the existing benchmarks. △ Less

Submitted 13 November, 2019; originally announced November 2019.

Comments: 13 pages, 8 figures

5-GHz Antisymmetric Mode Acoustic Delay Lines in Lithium Niobate Thin Film

Authors: Ruochen Lu, Yansong Yang, Ming-Huang Li, Michael Breen, Songbin Gong

Abstract: We present the first group of acoustic delay lines (ADLs) at 5 GHz, using the first-order antisymmetric (A1) mode in Z-cut lithium niobate thin films. The demonstrated ADLs significantly surpass the operation frequency of the previous works with similar feature sizes, because of its simultaneously fast phase velocity, large coupling coefficient, and low-loss. In this work, the propagation characte… ▽ More We present the first group of acoustic delay lines (ADLs) at 5 GHz, using the first-order antisymmetric (A1) mode in Z-cut lithium niobate thin films. The demonstrated ADLs significantly surpass the operation frequency of the previous works with similar feature sizes, because of its simultaneously fast phase velocity, large coupling coefficient, and low-loss. In this work, the propagation characteristics of the A1 mode in lithium niobate is analytically modeled and validated with finite element analysis. The design space of A1 ADLs is then investigated, including both the fundamental design parameters and those introduced from the practical implementation. The implemented ADLs at 5 GHz show a minimum insertion loss of 7.94 dBでしべる, an average IL of 9.1 dBでしべる, and a fractional bandwidth around 4%, with delays ranging between 15 ns to 109 ns and the center frequencies between 4.5 GHz and 5.25 GHz. The propagation characteristics of A1 mode acoustic waves have also been extracted for the first time. The A1 ADL platform can potentially enable wide-band high-frequency passive signal processing functions for future 5G applications in the sub-6 GHz spectrum bands. △ Less

Submitted 12 October, 2019; v1 submitted 29 July, 2019; originally announced July 2019.

Comments: 16 pages, 27 figures

Dilated FCN: Listening Longer to Hear Better

Authors: Shuyu Gong, Zhewei Wang, Tao Sun, Yuanhang Zhang, Charles D. Smith, Li Xu, Jundong Liu

Abstract: Deep neural network solutions have emerged as a new and powerful paradigm for speech enhancement (SE). The capabilities to capture long context and extract multi-scale patterns are crucial to design effective SE networks. Such capabilities, however, are often in conflict with the goal of maintaining compact networks to ensure good system generalization. In this paper, we explore dilation operation… ▽ More Deep neural network solutions have emerged as a new and powerful paradigm for speech enhancement (SE). The capabilities to capture long context and extract multi-scale patterns are crucial to design effective SE networks. Such capabilities, however, are often in conflict with the goal of maintaining compact networks to ensure good system generalization. In this paper, we explore dilation operations and apply them to fully convolutional networks (FCNs) to address this issue. Dilations equip the networks with greatly expanded receptive fields, without increasing the number of parameters. Different strategies to fuse multi-scale dilations, as well as to install the dilation modules are explored in this work. Using Noisy VCTK and AzBio sentences datasets, we demonstrate that the proposed dilation models significantly improve over the baseline FCN and outperform the state-of-the-art SE solutions. △ Less

Submitted 27 July, 2019; originally announced July 2019.

Comments: 5 pages; will appear in WASPAA conference

High performance fully etched isotropic microring resonators in thin-film lithium niobate on insulator platform

Authors: Meisam Bahadori, Yansong Yang, Lynford L. Goddard, Songbin Gong

Abstract: We present our design, fabrication, and experimental results for very high-performance isotropic microring resonators with small radii (~ 30 μみゅーm) based on single-mode strip waveguides and transverse magnetic (TM) polarization in a fully etched lithium niobate (Z-cut) thin-film on insulator. The loss of the devices is predicted to be < 10 dBでしべる/cm, and is measured to be ~ 7 dBでしべる/cm. The measured optical… ▽ More We present our design, fabrication, and experimental results for very high-performance isotropic microring resonators with small radii (~ 30 μみゅーm) based on single-mode strip waveguides and transverse magnetic (TM) polarization in a fully etched lithium niobate (Z-cut) thin-film on insulator. The loss of the devices is predicted to be < 10 dBでしべる/cm, and is measured to be ~ 7 dBでしべる/cm. The measured optical responses of microring resonators exhibit an extinction of ~ 25 dBでしべる (close to critical coupling), a 3 dBでしべる optical bandwidth of 49 pm (~ 6 GHz) for all-pass structures, an extinction of ~ 10 dBでしべる for add-drop structures, and a free spectral range of ~ 5.26 nm, all of which are in excellent agreement with the design. This work is the first step towards ultra-compact and fully isotropic optical modulators in thin-film lithium niobate on insulator. △ Less

Submitted 26 May, 2019; originally announced July 2019.

4.5 GHz Lithium Niobate MEMS Filters with 10% Fractional Bandwidth for 5G Front-ends

Authors: Yansong Yang, Ruochen Lu, Liuqing Gao, Songbin Gong

Abstract: This paper presents a new class of micro-electro-mechanical system (MEMS) C-band filters for 5G front-ends. The filter is comprised of resonators based on the first-order asymmetric Lamb wave (A1) mode in thin film lithium niobate. Two filters have been demonstrated at 4.5 GHz with sharp roll-off, flat in-band group delay, and spurious-free response over a wide frequency range. The first design sh… ▽ More This paper presents a new class of micro-electro-mechanical system (MEMS) C-band filters for 5G front-ends. The filter is comprised of resonators based on the first-order asymmetric Lamb wave (A1) mode in thin film lithium niobate. Two filters have been demonstrated at 4.5 GHz with sharp roll-off, flat in-band group delay, and spurious-free response over a wide frequency range. The first design shows a fractional bandwidth (FBW) of 10%, an insertion loss (IL) of 1.7 dBでしべる, an out-of-band (OoB) rejection of -13 dBでしべる, and a compact footprint of 0.36 mm2, while the second design shows an FBW of 8.5%, an IL of 2.7 dBでしべる, an OoB rejection of -25 dBでしべる, and a footprint of 0.9 mm^2. The demonstrations herein mark the largest fractional bandwidth (FBW) achieved for acoustic-only filters at 5G frequencies. △ Less

Submitted 4 June, 2019; originally announced June 2019.

Comments: 3 pages, 7 figures

Journal ref: Journal of Microelectromechanical Systems, vol. 28, no. 4, pp. 575-577, Aug. 2019

A 300-500 MHz Tunable Oscillator Exploiting Ten Overtones in Single Lithium Niobate Resonator

Authors: Ali Kourani, Ruochen Lu, Anming Gao, Songbin Gong

Abstract: This paper presents the first voltage-controlled MEMS oscillator (VCMO) based on a Lithium Niobate (LiNbO3) lateral overtone bulk acoustic resonator (LOBAR). The VCMO consists of a LOBAR in a closed loop with 2 amplification stages and a varactor-embedded tunable LC tank. By adjusting the bias voltage applied to the varactor, the tank can be tuned to change the closed-loop gain and phase responses… ▽ More This paper presents the first voltage-controlled MEMS oscillator (VCMO) based on a Lithium Niobate (LiNbO3) lateral overtone bulk acoustic resonator (LOBAR). The VCMO consists of a LOBAR in a closed loop with 2 amplification stages and a varactor-embedded tunable LC tank. By adjusting the bias voltage applied to the varactor, the tank can be tuned to change the closed-loop gain and phase responses of the oscillator so that Barkhausen conditions are satisfied for a particular resonance mode. The tank is designed to allow the proposed VCMO to lock to any of the ten overtones ranging from 300 to 500 MHz. Owing to the high-quality factors of the LiNbO3 LOBAR, the measured VCMO shows a low close-in phase noise of -100 dBでしべるc/Hz at 1 kHzきろへるつ offset from a 300 MHz carrier and a noise floor of -153 dBでしべるc/Hz while consuming 9 mW. With further optimization, this VCMO can lead to direct radio frequency (RF) synthesis for ultra-low-power transceivers in multi-mode Internet-of-Things (IoT) nodes. △ Less

Submitted 16 May, 2019; originally announced May 2019.

Solar-Sail Deep Space Trajectory Optimization Using Successive Convex Programming

Authors: Yu Song, Shengping Gong

Abstract: This paper presents a novel methodology for solving the time-optimal trajectory optimization problem for interplanetary solar-sail missions using successive convex programming. Based on the non-convex problem, different convexification technologies, such as change of variables, successive linearization, trust regions and virtual control, are discussed to convert the original problem into the formu… ▽ More This paper presents a novel methodology for solving the time-optimal trajectory optimization problem for interplanetary solar-sail missions using successive convex programming. Based on the non-convex problem, different convexification technologies, such as change of variables, successive linearization, trust regions and virtual control, are discussed to convert the original problem into the formulation of successive convex programming. Because of the free final-time, successive linearization is performed iteratively for the nonconvex terminal state constraints. After the convexification process, each of problems becomes a convex problem, which can be solved effectively. An augmented objective function is introduced to ensure the convergence performance and effectiveness of our algorithm. After that, algorithms are designed to solve the discrete sub-problems in a successive solution procedure. Finally, numerical results demonstrate the effectiveness and accuracy of our algorithms. △ Less

Submitted 24 June, 2019; v1 submitted 7 January, 2019; originally announced January 2019.

Comments: 25 pages, 10 figures (This is a pre-print of an article accepted in Astrophysics and Space Science. The final authenticated version will be available online at: https://doi.org/10.1007/s10509-019-3597-x)

Journal ref: Astrophysics and Space Science 364 (2019) 106

Cooperative Adaptive Cruise Control for Connected Autonomous Vehicles by Factoring Communication-Related Constraints

Authors: Chaojie Wang, Siyuan Gong, Anye Zhou, Tao Li, Srinivas Peeta

Abstract: Emergent cooperative adaptive cruise control (CACC) strategies being proposed in the literature for platoon formation in the Connected Autonomous Vehicle (CAV) context mostly assume idealized fixed information flow topologies (IFTs) for the platoon, implying guaranteed vehicle-to-vehicle (V2V) communications for the IFT assumed. Since CACC strategies entail continuous information broadcasting, com… ▽ More Emergent cooperative adaptive cruise control (CACC) strategies being proposed in the literature for platoon formation in the Connected Autonomous Vehicle (CAV) context mostly assume idealized fixed information flow topologies (IFTs) for the platoon, implying guaranteed vehicle-to-vehicle (V2V) communications for the IFT assumed. Since CACC strategies entail continuous information broadcasting, communication failures can occur in congested CAV traffic networks, leading to a platoon's IFT varying dynamically. To enhance the performance of CACC strategies, this study proposes the idea of dynamically optimizing the IFT for CACC, labeled the CACC-OIFT strategy. Under CACC-OIFT, the vehicles in the platoon cooperatively determine in real-time which vehicles will dynamically deactivate or activate the "send" functionality of their V2V communication devices to generate IFTs that optimize the platoon performance in terms of string stability under the ambient traffic conditions. Given the adaptive Proportional-Derivative (PD) controller with a two-predecessor-following scheme, and the ambient traffic conditions and the platoon size just before the start of a time period, the IFT optimization model determines the optimal IFT that maximizes the expected string stability. The optimal IFT is deployed for that time period, and the adaptive PD controller continuously determines the car-following behaviors of the vehicles based on the unfolding degeneration scenario for each time instant within that period. The effectiveness of the proposed CACC-OIFT is validated through numerical experiments in NS-3 based on NGSIM field data. The results indicate that the proposed CACC-OIFT can significantly enhance the string stability of platoon control in an unreliable V2V communication context, outperforming CACCs with fixed IFTs or with passive adaptive schemes for IFT dynamics. △ Less

Submitted 7 August, 2018; v1 submitted 19 July, 2018; originally announced July 2018.

Comments: the 23rd International Symposium on Transportation and Traffic Theory, ISTTT 23

Cooperative Adaptive Cruise Control for a Platoon of Connected and Autonomous Vehicles Considering Dynamic Information Flow Topology

Authors: Siyuan Gong, Anye Zhou, Jian Wang, Tao Li, Srinivas Peeta

Abstract: Vehicle-to-vehicle communications can be unreliable as interference causes communication failures. Thereby, the information flow topology for a platoon of Connected Autonomous Vehicles (CAVs) can vary dynamically. This limits existing Cooperative Adaptive Cruise Control (CACC) strategies as most of them assume a fixed information flow topology (IFT). To address this problem, we introduce a CACC de… ▽ More Vehicle-to-vehicle communications can be unreliable as interference causes communication failures. Thereby, the information flow topology for a platoon of Connected Autonomous Vehicles (CAVs) can vary dynamically. This limits existing Cooperative Adaptive Cruise Control (CACC) strategies as most of them assume a fixed information flow topology (IFT). To address this problem, we introduce a CACC design that considers a dynamic information flow topology (CACC-DIFT) for CAV platoons. An adaptive Proportional-Derivative (PD) controller under a two-predecessor-following IFT is proposed to reduce the negative effects when communication failures occur. The PD controller parameters are determined to ensure the string stability of the platoon. Further, the designed controller also factors the performance of individual vehicles. Hence, when communication failure occurs, the system will switch to a certain type of CACC instead of degenerating to adaptive cruise control, which improves the control performance considerably. The effectiveness of the proposed CACC-DIFT is validated through numerical experiments based on NGSIM field data. Results indicate that the proposed CACC-DIFT design outperforms a CACC with a predetermined information flow topology. △ Less

Submitted 7 August, 2018; v1 submitted 5 July, 2018; originally announced July 2018.

Comments: 6 pages, 6 figures, the 21st IEEE International Conference on Intelligent Transportation Systems

Toward Ka Band Acoustics: Lithium Niobate Asymmetrical Mode Piezoelectric MEMS Resonators

Authors: Yansong Yang, Ruochen Lu, Tomas Manzaneque, Songbin Gong

Abstract: This work presents a new class of micro-electro-mechanical system (MEMS) resonators toward Ka band (26.5-40GHz) for fifth-generation (5G) wireless communication. Resonant frequencies of 21.4 and 29.9 GHz have been achieved using the fifth and seventh order asymmetric (A5 and A7) Lamb-wave modes in a suspended Z-cut lithium niobate (LiNbO3) thin film. The fabricated device has demonstrated an elect… ▽ More This work presents a new class of micro-electro-mechanical system (MEMS) resonators toward Ka band (26.5-40GHz) for fifth-generation (5G) wireless communication. Resonant frequencies of 21.4 and 29.9 GHz have been achieved using the fifth and seventh order asymmetric (A5 and A7) Lamb-wave modes in a suspended Z-cut lithium niobate (LiNbO3) thin film. The fabricated device has demonstrated an electromechanical coupling (kt2) of 1.5% and 0.94% and extracted mechanical Qs of 406 and 474 for A5 and A7 respectively. The quality factors are the highest reported for piezoelectric MEMS resonators operating at this frequency range. The demonstrated performance has shown the strong potential of LiNbO3 asymmetric mode devices to meet the front-end filtering requirements of 5G. △ Less

Submitted 28 May, 2018; originally announced May 2018.

Comments: 5 pages, 7 figures, 2018 IEEE International Frequency Control Symposium

A Radio Frequency Non-reciprocal Network Based on Switched Acoustic Delay Lines

Authors: Ruochen Lu, Tomas Manzaneque, Yansong Yang, Liuqing Gao, Anming Gao, Songbin Gong

Abstract: This work demonstrates the first non-reciprocal network based on switched low-loss acoustic delay lines. The 4-port circulator is built upon a recently reported frequency-independent, programmable, non-reciprocal framework based on switched delay lines. The design space for such a system, including the origins of the insertion loss and harmonic responses, is theoretically investigated, illustratin… ▽ More This work demonstrates the first non-reciprocal network based on switched low-loss acoustic delay lines. The 4-port circulator is built upon a recently reported frequency-independent, programmable, non-reciprocal framework based on switched delay lines. The design space for such a system, including the origins of the insertion loss and harmonic responses, is theoretically investigated, illustrating that the key to better performance and low-cost modulation signal synthesis lies in a large delay. To implement a large delay, we resort to in-house fabricated low-loss, wide-band lithium niobate (LiNbO3) SH0 mode acoustic delay lines employing single-phase unidirectional transducers (SPUDT). The 4-port circulator, consisting of two switch modules and one delay line module, has been modularly designed, assembled, and tested. The design process employs time-domain full circuit simulation and the results match well with measurements. A 18.8 dBでしべる non-reciprocal contrast between insertion loss (IL = 6.6 dBでしべる) and isolation (25.4 dBでしべる) has been achieved over a fractional bandwidth of 8.8% at a center frequency 155 MHz, using a record low switching frequency of 877.19 kHzきろへるつ. The circulator also shows 25.9 dBでしべる suppression for the intra-modulated tone and 30 dBでしべるm for IIP3. Upon further development, such a system can potentially lead to future wide-band, low-loss chip-scale nonreciprocal RF systems with unprecedented programmability. △ Less

Submitted 28 March, 2018; originally announced March 2018.

Comments: 13 pages, 23 figures

Journal ref: IEEE Transactions on Microwave Theory and Techniques, vol. 67, no. 4, pp. 1516-1530, April 2019

A Radio Frequency Non-reciprocal Network Based on Switched Low-loss Acoustic Delay Lines

Authors: Ruochen Lu, Tomas Manzaneque, Yansong Yang, Anming Gao, Liuqing Gao, Songbin Gong

Abstract: This work demonstrates the first non-reciprocal network based on switched low-loss acoustic delay lines. A 21 dBでしべる non-reciprocal contrast between insertion loss (IL=6.7 dBでしべる) and isolation (28.3 dBでしべる) has been achieved over a fractional bandwidth of 8.8% at a center frequency 155MHz, using a record low switching frequency of 877.22 kHzきろへるつ. The 4-port circulator is built upon a newly reported framework by… ▽ More This work demonstrates the first non-reciprocal network based on switched low-loss acoustic delay lines. A 21 dBでしべる non-reciprocal contrast between insertion loss (IL=6.7 dBでしべる) and isolation (28.3 dBでしべる) has been achieved over a fractional bandwidth of 8.8% at a center frequency 155MHz, using a record low switching frequency of 877.22 kHzきろへるつ. The 4-port circulator is built upon a newly reported framework by the authors, but using two in-house fabricated low-loss, wide-band lithium niobate (LiNbO3) delay lines with single-phase unidirectional transducers (SPUDT) and commercial available switches. Such a system can potentially lead to future wide-band, low-loss chip-scale nonreciprocal RF systems with unprecedented programmability. △ Less

Submitted 9 January, 2018; originally announced January 2018.

Comments: 4 pages, 7 figures

Frequency Independent Framework for Synthesis of Programmable Non-reciprocal Networks

Authors: Ruochen Lu, John Krol, Liuqing Gao, Songbin Gong

Abstract: Passive and linear nonreciprocal networks at microwave frequencies hold great promises in enabling new front-end architectures for wireless communication systems. Their nonreciprocity has been achieved by disrupting the time-reversal symmetry using various forms of biasing schemes, but only over a limited frequency range. Here we demonstrate a framework for synthesizing theoretically frequency-ind… ▽ More Passive and linear nonreciprocal networks at microwave frequencies hold great promises in enabling new front-end architectures for wireless communication systems. Their nonreciprocity has been achieved by disrupting the time-reversal symmetry using various forms of biasing schemes, but only over a limited frequency range. Here we demonstrate a framework for synthesizing theoretically frequency-independent multi-port nonreciprocal networks. The framework is highly expandable, and can have an arbitrary number of ports while simultaneously sustaining balanced performance and providing unprecedented programmability of non-reciprocity. A 4-port circulator based on such a framework is implemented and tested to produce broadband nonreciprocal performance from 10 MHz to 900 MHz with a temporal switching effort at 23.8 MHz. With the combination of broad bandwidth, low temporal effort, and high programmability, the framework could inspire new ways of implementing multiple input multiple output (MIMO) communication systems for 5G. △ Less

Submitted 7 January, 2018; v1 submitted 4 January, 2018; originally announced January 2018.

Comments: 10 pages, 6 figures

Journal ref: Scientific Reports 8, 14655 (2018)