-
Statistical evaluation of 571 GaAs quantum point contact transistors showing the 0.7 anomaly in quantized conductance using millikelvin cryogenic on-chip multiplexing
Authors:
Pengcheng Ma,
Kaveh Delfanazari,
Reuben K. Puddy,
Jiahui Li,
Moda Cao,
Teng Yi,
Jonathan P. Griffiths,
Harvey E. Beere,
David A. Ritchie,
Michael J. Kelly,
Charles G. Smith
Abstract:
The mass production and the practical number of cryogenic quantum devices producible in a single chip are limited to the number of electrical contact pads and wiring of the cryostat or dilution refrigerator. It is, therefore, beneficial to contrast the measurements of hundreds of devices fabricated in a single chip in one cooldown process to promote the scalability, integrability, reliability, and…
▽ More
The mass production and the practical number of cryogenic quantum devices producible in a single chip are limited to the number of electrical contact pads and wiring of the cryostat or dilution refrigerator. It is, therefore, beneficial to contrast the measurements of hundreds of devices fabricated in a single chip in one cooldown process to promote the scalability, integrability, reliability, and reproducibility of quantum devices and to save evaluation time, cost and energy. Here, we use a cryogenic on-chip multiplexer architecture and investigate the statistics of the 0.7 anomaly observed on the first three plateaus of the quantized conductance of semiconductor quantum point contact (QPC) transistors. Our single chips contain 256 split gate field effect QPC transistors (QFET) each, with two 16-branch multiplexed source-drain and gate pads, allowing individual transistors to be selected, addressed and controlled through an electrostatic gate voltage process. A total of 1280 quantum transistors with nano-scale dimensions are patterned in 5 different chips of GaAs heterostructures. From the measurements of 571 functioning QPCs taken at temperatures T= 1.4 K and T= 40 mK, it is found that the spontaneous polarisation model and Kondo effect do not fit our results. Furthermore, some of the features in our data largely agreed with van Hove model with short-range interactions. Our approach provides further insight into the quantum mechanical properties and microscopic origin of the 0.7 anomaly in QPCs, paving the way for the development of semiconducting quantum circuits and integrated cryogenic electronics, for scalable quantum logic control, readout, synthesis, and processing applications.
△ Less
Submitted 10 April, 2024;
originally announced April 2024.
-
Online input design for discrimination of linear models using concave minimization
Authors:
Jacques Noom,
Oleg Soloviev,
Carlas Smith,
Michel Verhaegen
Abstract:
Stochastic Closed-Loop Active Fault Diagnosis (CLAFD) aims to select the input sequentially in order to improve the discrimination of different models by minimizing the predicted error probability. As computation of these error probabilities encompasses the evaluation of multidimensional probability integrals, relaxation methods are of interest. This manuscript presents a new method that allows to…
▽ More
Stochastic Closed-Loop Active Fault Diagnosis (CLAFD) aims to select the input sequentially in order to improve the discrimination of different models by minimizing the predicted error probability. As computation of these error probabilities encompasses the evaluation of multidimensional probability integrals, relaxation methods are of interest. This manuscript presents a new method that allows to make an improved trade-off between three factors -- namely maximized accuracy of diagnosis, minimized number of consecutive measurements to achieve that accuracy, and minimized computational effort per time step -- with respect to the state-of-the-art. It relies on minimizing an upper bound on the error probability, which is in the case of linear models with Gaussian noise proven to be concave in the most challenging discrimination conditions. A simulation study is conducted both for open-loop and feedback controlled candidate models. The results demonstrate the favorable trade-off using the new contributions in this manuscript.
△ Less
Submitted 11 January, 2024;
originally announced January 2024.
-
KnowSafe: Combined Knowledge and Data Driven Hazard Mitigation in Artificial Pancreas Systems
Authors:
Xugui Zhou,
Maxfield Kouzel,
Chloe Smith,
Homa Alemzadeh
Abstract:
Significant progress has been made in anomaly detection and run-time monitoring to improve the safety and security of cyber-physical systems (CPS). However, less attention has been paid to hazard mitigation. This paper proposes a combined knowledge and data driven approach, KnowSafe, for the design of safety engines that can predict and mitigate safety hazards resulting from safety-critical malici…
▽ More
Significant progress has been made in anomaly detection and run-time monitoring to improve the safety and security of cyber-physical systems (CPS). However, less attention has been paid to hazard mitigation. This paper proposes a combined knowledge and data driven approach, KnowSafe, for the design of safety engines that can predict and mitigate safety hazards resulting from safety-critical malicious attacks or accidental faults targeting a CPS controller. We integrate domain-specific knowledge of safety constraints and context-specific mitigation actions with machine learning (ML) techniques to estimate system trajectories in the far and near future, infer potential hazards, and generate optimal corrective actions to keep the system safe. Experimental evaluation on two realistic closed-loop testbeds for artificial pancreas systems (APS) and a real-world clinical trial dataset for diabetes treatment demonstrates that KnowSafe outperforms the state-of-the-art by achieving higher accuracy in predicting system state trajectories and potential hazards, a low false positive rate, and no false negatives. It also maintains the safe operation of the simulated APS despite faults or attacks without introducing any new hazards, with a hazard mitigation success rate of 92.8%, which is at least 76% higher than solely rule-based (50.9%) and data-driven (52.7%) methods.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Bounded Disturbance Amplification for Mass Chains with Passive Interconnection
Authors:
Kaoru Yamamoto,
Malcolm C. Smith
Abstract:
This paper introduces the problem of passive control of a chain of N identical masses in which there is an identical passive connection between neighbouring masses and a similar connection to a movable point. The problem arises in the design of multi-storey buildings which are subjected to earthquake disturbances, but applies in other situations, for example vehicle platoons. The paper studies the…
▽ More
This paper introduces the problem of passive control of a chain of N identical masses in which there is an identical passive connection between neighbouring masses and a similar connection to a movable point. The problem arises in the design of multi-storey buildings which are subjected to earthquake disturbances, but applies in other situations, for example vehicle platoons. The paper studies the scalar transfer functions from the disturbance to a given intermass displacement. It is shown that these transfer functions can be conveniently represented in the form of complex iterative maps and that these maps provide a method to establish boundedness in N of the H-infinity norm of these transfer functions for certain choices of interconnection impedance.
△ Less
Submitted 24 December, 2022;
originally announced December 2022.
-
Individualized Conditioning and Negative Distances for Speaker Separation
Authors:
Tao Sun,
Nidal Abuhajar,
Shuyu Gong,
Zhewei Wang,
Charles D. Smith,
Xianhui Wang,
Li Xu,
Jundong Liu
Abstract:
Speaker separation aims to extract multiple voices from a mixed signal. In this paper, we propose two speaker-aware designs to improve the existing speaker separation solutions. The first model is a speaker conditioning network that integrates speech samples to generate individualized speaker conditions, which then provide informed guidance for a separation module to produce well-separated outputs…
▽ More
Speaker separation aims to extract multiple voices from a mixed signal. In this paper, we propose two speaker-aware designs to improve the existing speaker separation solutions. The first model is a speaker conditioning network that integrates speech samples to generate individualized speaker conditions, which then provide informed guidance for a separation module to produce well-separated outputs.
The second design aims to reduce non-target voices in the separated speech. To this end, we propose negative distances to penalize the appearance of any non-target voice in the channel outputs, and positive distances to drive the separated voices closer to the clean targets. We explore two different setups, weighted-sum and triplet-like, to integrate these two distances to form a combined auxiliary loss for the separation networks. Experiments conducted on LibriMix demonstrate the effectiveness of our proposed models.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
A Comparative Study on 1.5T-3T MRI Conversion through Deep Neural Network Models
Authors:
Binhua Liao,
Yani Chen,
Zhewei Wang,
Charles D. Smith,
Jundong Liu
Abstract:
In this paper, we explore the capabilities of a number of deep neural network models in generating whole-brain 3T-like MR images from clinical 1.5T MRIs. The models include a fully convolutional network (FCN) method and three state-of-the-art super-resolution solutions, ESPCN [26], SRGAN [17] and PRSR [7]. The FCN solution, U-Convert-Net, carries out mapping of 1.5T-to-3T slices through a U-Net-li…
▽ More
In this paper, we explore the capabilities of a number of deep neural network models in generating whole-brain 3T-like MR images from clinical 1.5T MRIs. The models include a fully convolutional network (FCN) method and three state-of-the-art super-resolution solutions, ESPCN [26], SRGAN [17] and PRSR [7]. The FCN solution, U-Convert-Net, carries out mapping of 1.5T-to-3T slices through a U-Net-like architecture, with 3D neighborhood information integrated through a multi-view ensemble. The pros and cons of the models, as well the associated evaluation metrics, are measured with experiments and discussed in depth. To the best of our knowledge, this study is the first work to evaluate multiple deep learning solutions for whole-brain MRI conversion, as well as the first attempt to utilize FCN/U-Net-like structure for this purpose.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
Controller Hardware-in-the-loop (C-HIL) Testing of Decentralized EV-Grid Integration
Authors:
Calvin Flack,
Emin Ucer,
Charles Parker Smith,
Mithat Kisacikoglu
Abstract:
Present grid infrastructure is unprepared for the wide-scale integration of electric vehicles (EVs). Real-time grid simulation and hardware testing are necessary for the fast and accurate development of EV charging control strategies that are applicable in the field to mitigate their adverse effects. To help facilitate this goal, in this study, we develop a controller verification testbed using a…
▽ More
Present grid infrastructure is unprepared for the wide-scale integration of electric vehicles (EVs). Real-time grid simulation and hardware testing are necessary for the fast and accurate development of EV charging control strategies that are applicable in the field to mitigate their adverse effects. To help facilitate this goal, in this study, we develop a controller verification testbed using a baseline bidirectional AC/DC converter, commonly used in on-board EV chargers, within a hardware-in-the-loop (HIL) test system. The converter runs real-time on a very-fast time scale and integrates into an external grid simulator. We utilize the strength of the HIL device in simulating power electronics while simultaneously realizing a complex distribution grid operation in real-time. The whole system holistically provides an opportunity to see the implementation benefits of a decentralized charging algorithm on the voltage stability of the distribution grid. The study presents a step-by-step approach to developing and testing controllers, providing an essential contribution in the field demonstration of decentralized EV charger control strategies.
△ Less
Submitted 1 May, 2022;
originally announced May 2022.
-
Low dosage 3D volume fluorescence microscopy imaging using compressive sensing
Authors:
Varun Mannam,
Jacob Brandt,
Cody J. Smith,
Scott Howard
Abstract:
Fluorescence microscopy has been a significant tool to observe long-term imaging of embryos (in vivo) growth over time. However, cumulative exposure is phototoxic to such sensitive live samples. While techniques like light-sheet fluorescence microscopy (LSFM) allow for reduced exposure, it is not well suited for deep imaging models. Other computational techniques are computationally expensive and…
▽ More
Fluorescence microscopy has been a significant tool to observe long-term imaging of embryos (in vivo) growth over time. However, cumulative exposure is phototoxic to such sensitive live samples. While techniques like light-sheet fluorescence microscopy (LSFM) allow for reduced exposure, it is not well suited for deep imaging models. Other computational techniques are computationally expensive and often lack restoration quality. To address this challenge, one can use various low-dosage imaging techniques that are developed to achieve the 3D volume reconstruction using a few slices in the axial direction (z-axis); however, they often lack restoration quality. Also, acquiring dense images (with small steps) in the axial direction is computationally expensive. To address this challenge, we present a compressive sensing (CS) based approach to fully reconstruct 3D volumes with the same signal-to-noise ratio (SNR) with less than half of the excitation dosage. We present the theory and experimentally validate the approach. To demonstrate our technique, we capture a 3D volume of the RFP labeled neurons in the zebrafish embryo spinal cord (30um thickness) with the axial sampling of 0.1um using a confocal microscope. From the results, we observe the CS-based approach achieves accurate 3D volume reconstruction from less than 20% of the entire stack optical sections. The developed CS-based methodology in this work can be easily applied to other deep imaging modalities such as two-photon and light-sheet microscopy, where reducing sample photo-toxicity is a critical challenge.
△ Less
Submitted 3 January, 2022;
originally announced January 2022.
-
Convolutional Neural Network Denoising in Fluorescence Lifetime Imaging Microscopy (FLIM)
Authors:
Varun Mannam,
Yide Zhang,
Xiaotong Yuan,
Takashi Hato,
Pierre C. Dagher,
Evan L. Nichols,
Cody J. Smith,
Kenneth W. Dunn,
Scott Howard
Abstract:
Fluorescence lifetime imaging microscopy (FLIM) systems are limited by their slow processing speed, low signal-to-noise ratio (SNR), and expensive and challenging hardware setups. In this work, we demonstrate applying a denoising convolutional network to improve FLIM SNR. The network will be integrated with an instant FLIM system with fast data acquisition based on analog signal processing, high S…
▽ More
Fluorescence lifetime imaging microscopy (FLIM) systems are limited by their slow processing speed, low signal-to-noise ratio (SNR), and expensive and challenging hardware setups. In this work, we demonstrate applying a denoising convolutional network to improve FLIM SNR. The network will be integrated with an instant FLIM system with fast data acquisition based on analog signal processing, high SNR using high-efficiency pulse-modulation, and cost-effective implementation utilizing off-the-shelf radio-frequency components. Our instant FLIM system simultaneously provides the intensity, lifetime, and phasor plots \textit{in vivo} and \textit{ex vivo}. By integrating image denoising using the trained deep learning model on the FLIM data, provide accurate FLIM phasor measurements are obtained. The enhanced phasor is then passed through the K-means clustering segmentation method, an unbiased and unsupervised machine learning technique to separate different fluorophores accurately. Our experimental \textit{in vivo} mouse kidney results indicate that introducing the deep learning image denoising model before the segmentation effectively removes the noise in the phasor compared to existing methods and provides clearer segments. Hence, the proposed deep learning-based workflow provides fast and accurate automatic segmentation of fluorescence images using instant FLIM. The denoising operation is effective for the segmentation if the FLIM measurements are noisy. The clustering can effectively enhance the detection of biological structures of interest in biomedical imaging applications.
△ Less
Submitted 6 March, 2021;
originally announced March 2021.
-
Speech Enhancement Using Multi-Stage Self-Attentive Temporal Convolutional Networks
Authors:
Ju Lin,
Adriaan J. van Wijngaarden,
Kuang-Ching Wang,
Melissa C. Smith
Abstract:
Multi-stage learning is an effective technique to invoke multiple deep-learning modules sequentially. This paper applies multi-stage learning to speech enhancement by using a multi-stage structure, where each stage comprises a self-attention (SA) block followed by stacks of temporal convolutional network (TCN) blocks with doubling dilation factors. Each stage generates a prediction that is refined…
▽ More
Multi-stage learning is an effective technique to invoke multiple deep-learning modules sequentially. This paper applies multi-stage learning to speech enhancement by using a multi-stage structure, where each stage comprises a self-attention (SA) block followed by stacks of temporal convolutional network (TCN) blocks with doubling dilation factors. Each stage generates a prediction that is refined in a subsequent stage. A fusion block is inserted at the input of later stages to re-inject original information. The resulting multi-stage speech enhancement system, in short, multi-stage SA-TCN, is compared with state-of-the-art deep-learning speech enhancement methods using the LibriSpeech and VCTK data sets. The multi-stage SA-TCN system's hyper-parameters are fine-tuned, and the impact of the SA block, the fusion block and the number of stages are determined. The use of a multi-stage SA-TCN system as a front-end for automatic speech recognition systems is investigated as well. It is shown that the multi-stage SA-TCN systems perform well relative to other state-of-the-art systems in terms of speech enhancement and speech recognition scores.
△ Less
Submitted 24 February, 2021;
originally announced February 2021.
-
A multispeaker dataset of raw and reconstructed speech production real-time MRI video and 3D volumetric images
Authors:
Yongwan Lim,
Asterios Toutios,
Yannick Bliesener,
Ye Tian,
Sajan Goud Lingala,
Colin Vaz,
Tanner Sorensen,
Miran Oh,
Sarah Harper,
Weiyi Chen,
Yoonjeong Lee,
Johannes Töger,
Mairym Lloréns Montesserin,
Caitlin Smith,
Bianca Godinez,
Louis Goldstein,
Dani Byrd,
Krishna S. Nayak,
Shrikanth S. Narayanan
Abstract:
Real-time magnetic resonance imaging (RT-MRI) of human speech production is enabling significant advances in speech science, linguistics, bio-inspired speech technology development, and clinical applications. Easy access to RT-MRI is however limited, and comprehensive datasets with broad access are needed to catalyze research across numerous domains. The imaging of the rapidly moving articulators…
▽ More
Real-time magnetic resonance imaging (RT-MRI) of human speech production is enabling significant advances in speech science, linguistics, bio-inspired speech technology development, and clinical applications. Easy access to RT-MRI is however limited, and comprehensive datasets with broad access are needed to catalyze research across numerous domains. The imaging of the rapidly moving articulators and dynamic airway shaping during speech demands high spatio-temporal resolution and robust reconstruction methods. Further, while reconstructed images have been published, to-date there is no open dataset providing raw multi-coil RT-MRI data from an optimized speech production experimental setup. Such datasets could enable new and improved methods for dynamic image reconstruction, artifact correction, feature extraction, and direct extraction of linguistically-relevant biomarkers. The present dataset offers a unique corpus of 2D sagittal-view RT-MRI videos along with synchronized audio for 75 subjects performing linguistically motivated speech tasks, alongside the corresponding first-ever public domain raw RT-MRI data. The dataset also includes 3D volumetric vocal tract MRI during sustained speech sounds and high-resolution static anatomical T2-weighted upper airway MRI for each subject.
△ Less
Submitted 15 February, 2021;
originally announced February 2021.
-
Particle Filtering Convergence Results for Radiation Source Detection
Authors:
Jared Cook,
Ralph C. Smith,
Camila Ramirez,
Nageswara S. V. Rao
Abstract:
Recent research has shown a weak convergence - convergence in distribution - of particle filtering methods under certain assumptions. However, some applications of particle filtering methods, such as radiation source localization problems, can be shown to have an extended convergence in the following sense. Using the assumptions of statistically independent measurements and a measurement process t…
▽ More
Recent research has shown a weak convergence - convergence in distribution - of particle filtering methods under certain assumptions. However, some applications of particle filtering methods, such as radiation source localization problems, can be shown to have an extended convergence in the following sense. Using the assumptions of statistically independent measurements and a measurement process that does not depend on the state space, we prove the convergence of the posterior and its approximation by the particle filtering algorithm to the true Dirac distribution characterizing the source location. We design a Sampling Importance Resampling (SIR) filter to detect and locate a radiation source using a network of sensors. To numerically assess the effectiveness of this particle filter we employ it to solve a source localization problem using both experimental open field data sets from Intelligent Radiation Sensor Systems (IRSS) tests and numerically simulated urban domain data using a ray-tracing model. We then prove the theoretical convergence of the estimate to the state posterior probability density function.
△ Less
Submitted 19 April, 2020;
originally announced April 2020.
-
Dilated FCN: Listening Longer to Hear Better
Authors:
Shuyu Gong,
Zhewei Wang,
Tao Sun,
Yuanhang Zhang,
Charles D. Smith,
Li Xu,
Jundong Liu
Abstract:
Deep neural network solutions have emerged as a new and powerful paradigm for speech enhancement (SE). The capabilities to capture long context and extract multi-scale patterns are crucial to design effective SE networks. Such capabilities, however, are often in conflict with the goal of maintaining compact networks to ensure good system generalization. In this paper, we explore dilation operation…
▽ More
Deep neural network solutions have emerged as a new and powerful paradigm for speech enhancement (SE). The capabilities to capture long context and extract multi-scale patterns are crucial to design effective SE networks. Such capabilities, however, are often in conflict with the goal of maintaining compact networks to ensure good system generalization. In this paper, we explore dilation operations and apply them to fully convolutional networks (FCNs) to address this issue. Dilations equip the networks with greatly expanded receptive fields, without increasing the number of parameters. Different strategies to fuse multi-scale dilations, as well as to install the dilation modules are explored in this work. Using Noisy VCTK and AzBio sentences datasets, we demonstrate that the proposed dilation models significantly improve over the baseline FCN and outperform the state-of-the-art SE solutions.
△ Less
Submitted 27 July, 2019;
originally announced July 2019.
-
A data-driven approach to sampling matrix selection for compressive sensing
Authors:
Elin Farnell,
Henry Kvinge,
John P. Dixon,
Julia R. Dupuis,
Michael Kirby,
Chris Peterson,
Elizabeth C. Schundler,
Christian W. Smith
Abstract:
Sampling is a fundamental aspect of any implementation of compressive sensing. Typically, the choice of sampling method is guided by the reconstruction basis. However, this approach can be problematic with respect to certain hardware constraints and is not responsive to domain-specific context. We propose a method for defining an order for a sampling basis that is optimal with respect to capturing…
▽ More
Sampling is a fundamental aspect of any implementation of compressive sensing. Typically, the choice of sampling method is guided by the reconstruction basis. However, this approach can be problematic with respect to certain hardware constraints and is not responsive to domain-specific context. We propose a method for defining an order for a sampling basis that is optimal with respect to capturing variance in data, thus allowing for meaningful sensing at any desired level of compression. We focus on the Walsh-Hadamard sampling basis for its relevance to hardware constraints, but our approach applies to any sampling basis of interest. We illustrate the effectiveness of our method on the Physical Sciences Inc. Fabry-Pérot interferometer sensor multispectral dataset, the Johns Hopkins Applied Physics Lab FTIR-based longwave infrared sensor hyperspectral dataset, and a Colorado State University Swiss Ranger depth image dataset. The spectral datasets consist of simulant experiments, including releases of chemicals such as GAA and SF6. We combine our sampling and reconstruction with the adaptive coherence estimator (ACE) and bulk coherence for chemical detection and we incorporate an algorithmic threshold for ACE values to determine the presence or absence of a chemical. We compare results across sampling methods in this context. We have successful chemical detection at a compression rate of 90%. For all three datasets, we compare our sampling approach to standard orderings of sampling basis such as random, sequency, and an analog of sequency that we term `frequency.' In one instance, the peak signal to noise ratio was improved by over 30% across a test set of depth images.
△ Less
Submitted 20 June, 2019;
originally announced June 2019.
-
Principles of lossless adjustable one-ports
Authors:
Tryphon T. Georgiou,
Faryar Jabbari,
Malcolm C. Smith
Abstract:
This paper explores the possibility to construct two-terminal mechanical devices (one-ports) which are lossless and adjustable. To be lossless, the device must be passive (i.e. not requiring a power supply) and non-dissipative. To be adjustable, a parameter of the device should be freely variable in real time as a control input. For the simplest lossless one ports, the spring and inerter, the ques…
▽ More
This paper explores the possibility to construct two-terminal mechanical devices (one-ports) which are lossless and adjustable. To be lossless, the device must be passive (i.e. not requiring a power supply) and non-dissipative. To be adjustable, a parameter of the device should be freely variable in real time as a control input. For the simplest lossless one ports, the spring and inerter, the question is whether the stiffness and inertance may be varied freely in a lossless manner. We will show that the typical laws which have been proposed for adjustable springs and inerters are necessarily active and that it is not straightforward to modify them to achieve losslessness, or indeed passivity. By means of a physical construction using a lever with moveable fulcrum we will derive device laws for adjustable springs and inerters which satisfy a formal definition of losslessness. We further provide a construction method which does not require a power supply for physically realisable translational and rotary springs and inerters. The analogous questions for lossless adjustable electrical devices are examined.
△ Less
Submitted 15 May, 2019;
originally announced May 2019.
-
A Poisson-Gaussian Denoising Dataset with Real Fluorescence Microscopy Images
Authors:
Yide Zhang,
Yinhao Zhu,
Evan Nichols,
Qingfei Wang,
Siyuan Zhang,
Cody Smith,
Scott Howard
Abstract:
Fluorescence microscopy has enabled a dramatic development in modern biology. Due to its inherently weak signal, fluorescence microscopy is not only much noisier than photography, but also presented with Poisson-Gaussian noise where Poisson noise, or shot noise, is the dominating noise source. To get clean fluorescence microscopy images, it is highly desirable to have effective denoising algorithm…
▽ More
Fluorescence microscopy has enabled a dramatic development in modern biology. Due to its inherently weak signal, fluorescence microscopy is not only much noisier than photography, but also presented with Poisson-Gaussian noise where Poisson noise, or shot noise, is the dominating noise source. To get clean fluorescence microscopy images, it is highly desirable to have effective denoising algorithms and datasets that are specifically designed to denoise fluorescence microscopy images. While such algorithms exist, no such datasets are available. In this paper, we fill this gap by constructing a dataset - the Fluorescence Microscopy Denoising (FMD) dataset - that is dedicated to Poisson-Gaussian denoising. The dataset consists of 12,000 real fluorescence microscopy images obtained with commercial confocal, two-photon, and wide-field microscopes and representative biological samples such as cells, zebrafish, and mouse brain tissues. We use image averaging to effectively obtain ground truth images and 60,000 noisy images with different noise levels. We use this dataset to benchmark 10 representative denoising algorithms and find that deep learning methods have the best performance. To our knowledge, this is the first real microscopy image dataset for Poisson-Gaussian denoising purposes and it could be an important tool for high-quality, real-time denoising applications in biomedical research.
△ Less
Submitted 5 April, 2019; v1 submitted 26 December, 2018;
originally announced December 2018.
-
Blind single-frame deconvolution by tangential iterative projections (TIP)
Authors:
Dean Wilding,
Oleg Soloviev,
Paolo Pozzi,
Carlas Smith,
Gleb Vdovin,
Michel Verhaegen
Abstract:
Deconvolution serves as a computational means of removing the effect of optical aberrations from recorded images and is employed in many technical and scientific fields of study. In most imaging scenarios the nature of the blurring kernel or point-spread function (PSF) of the imaging system is unknown and both the object and PSF can be estimated using different forms of mathematical optimisation.…
▽ More
Deconvolution serves as a computational means of removing the effect of optical aberrations from recorded images and is employed in many technical and scientific fields of study. In most imaging scenarios the nature of the blurring kernel or point-spread function (PSF) of the imaging system is unknown and both the object and PSF can be estimated using different forms of mathematical optimisation. The Tangential Iterative Projections (TIP) algorithm is a multi-frame deconvolution framework where multiple images can be combined to obtain a single estimate of the object. It is shown here that this framework may be also used for single-frame deconvolution with a few modifications to the algorithm. This step from multiple to one frame is non-trivial and greatly improves the applicability of the TIP framework to most imaging scenarios.
△ Less
Submitted 16 October, 2018;
originally announced October 2018.
-
Expanding the Active Inference Landscape: More Intrinsic Motivations in the Perception-Action Loop
Authors:
Martin Biehl,
Christian Guckelsberger,
Christoph Salge,
Simón C. Smith,
Daniel Polani
Abstract:
Active inference is an ambitious theory that treats perception, inference and action selection of autonomous agents under the heading of a single principle. It suggests biologically plausible explanations for many cognitive phenomena, including consciousness. In active inference, action selection is driven by an objective function that evaluates possible future actions with respect to current, inf…
▽ More
Active inference is an ambitious theory that treats perception, inference and action selection of autonomous agents under the heading of a single principle. It suggests biologically plausible explanations for many cognitive phenomena, including consciousness. In active inference, action selection is driven by an objective function that evaluates possible future actions with respect to current, inferred beliefs about the world. Active inference at its core is independent from extrinsic rewards, resulting in a high level of robustness across e.g.\ different environments or agent morphologies. In the literature, paradigms that share this independence have been summarised under the notion of intrinsic motivations. In general and in contrast to active inference, these models of motivation come without a commitment to particular inference and action selection mechanisms. In this article, we study if the inference and action selection machinery of active inference can also be used by alternatives to the originally included intrinsic motivation. The perception-action loop explicitly relates inference and action selection to the environment and agent memory, and is consequently used as foundation for our analysis. We reconstruct the active inference approach, locate the original formulation within, and show how alternative intrinsic motivations can be used while keeping many of the original features intact. Furthermore, we illustrate the connection to universal reinforcement learning by means of our formalism. Active inference research may profit from comparisons of the dynamics induced by alternative intrinsic motivations. Research on intrinsic motivations may profit from an additional way to implement intrinsically motivated agents that also share the biological plausibility of active inference.
△ Less
Submitted 21 June, 2018;
originally announced June 2018.
-
Bayesian Control for Concentrating Mixed Nuclear Waste
Authors:
Robert L. Welch,
Clayton Smith
Abstract:
A control algorithm for batch processing of mixed waste is proposed based on conditional Gaussian Bayesian networks. The network is compiled during batch staging for real-time response to sensor input.
A control algorithm for batch processing of mixed waste is proposed based on conditional Gaussian Bayesian networks. The network is compiled during batch staging for real-time response to sensor input.
△ Less
Submitted 23 January, 2013;
originally announced January 2013.