-
HiSAC: High-Resolution Sensing with Multiband Communication Signals
Authors:
Jacopo Pegoraro,
Jesus O. Lacruz,
Michele Rossi,
Joerg Widmer
Abstract:
Integrated Sensing And Communication (ISAC ) systems are expected to perform accurate radar sensing while having minimal impact on communication. Ideally, sensing should only reuse communication resources, especially for spectrum which is contended by many applications. However, this poses a great challenge in that communication systems often operate on narrow subbands with low sensing resolution.…
▽ More
Integrated Sensing And Communication (ISAC ) systems are expected to perform accurate radar sensing while having minimal impact on communication. Ideally, sensing should only reuse communication resources, especially for spectrum which is contended by many applications. However, this poses a great challenge in that communication systems often operate on narrow subbands with low sensing resolution. Combining contiguous subbands has shown significant resolution gain in active localization. However, multiband ISAC remains unexplored due to communication subbands being highly sparse (non-contiguous) and affected by phase offsets that prevent their aggregation (incoherent). To tackle these problems, we design HiSAC, the first multiband ISAC system that combines diverse subbands across a wide frequency range to achieve super-resolved passive ranging. To solve the non-contiguity and incoherence of subbands, HiSAC combines them progressively, exploiting an anchor propagation path between transmitter and receiver in an optimization problem to achieve phase coherence. HiSAC fully reuses pilot signals in communication systems, it applies to different frequencies and can combine diverse technologies, e.g., 5G-NR and WiGig. We implement HiSAC on an experimental platform in the millimeter-wave unlicensed band and test it on objects and humans. Our results show it enhances the sensing resolution by up to 20 times compared to single-band processing while occupying the same spectrum.
△ Less
Submitted 9 July, 2024;
originally announced July 2024.
-
Angle estimation using mmWave RSS measurements with enhanced multipath information
Authors:
Neharika Valecha,
Jesus Omar Lacruz,
Michael Lentmaier,
Joerg Widmer,
Fredrik Tufvesson
Abstract:
mmWave communication has come up as the unexplored spectrum for 5G services. With new standards for 5G NR positioning, more off-the-shelf platforms and algorithms are needed to perform indoor positioning. An object can be accurately positioned in a room either by using an angle and a delay estimate or two angle estimates or three delay estimates. We propose an algorithm to jointly estimate the ang…
▽ More
mmWave communication has come up as the unexplored spectrum for 5G services. With new standards for 5G NR positioning, more off-the-shelf platforms and algorithms are needed to perform indoor positioning. An object can be accurately positioned in a room either by using an angle and a delay estimate or two angle estimates or three delay estimates. We propose an algorithm to jointly estimate the angle of arrival (AoA) and angle of departure (AoD), based only on the received signal strength (RSS). We use mm-FLEX, an experimentation platform developed by IMDEA Networks Institute that can perform real-time signal processing for experimental validation of our proposed algorithm. Codebook-based beampatterns are used with a uniquely placed multi-antenna array setup to enhance the reception of multipath components and we obtain an AoA estimate per receiver thereby overcoming the line-of-sight (LoS) limitation of RSS-based localization systems. We further validate the results from measurements by emulating the setup with a simple ray-tracing approach.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Sensing in Bi-Static ISAC Systems with Clock Asynchronism: A Signal Processing Perspective
Authors:
Kai Wu,
Jacopo Pegoraro,
Francesca Meneghello,
J. Andrew Zhang,
Jesus O. Lacruz,
Joerg Widmer,
Francesco Restuccia,
Michele Rossi,
Xiaojing Huang,
Daqing Zhang,
Giuseppe Caire,
Y. Jay Guo
Abstract:
Integrated Sensing and Communication (ISAC) has been identified as a pillar usage scenario for the impending 6G era. Bi-static sensing, a major type of sensing in ISAC, is promising to expedite ISAC in the near future, as it requires minimal changes to the existing network infrastructure. However, a critical challenge for bi-static sensing is clock asynchronism due to the use of different clocks a…
▽ More
Integrated Sensing and Communication (ISAC) has been identified as a pillar usage scenario for the impending 6G era. Bi-static sensing, a major type of sensing in ISAC, is promising to expedite ISAC in the near future, as it requires minimal changes to the existing network infrastructure. However, a critical challenge for bi-static sensing is clock asynchronism due to the use of different clocks at far-separated transmitters and receivers. This causes the received signal to be affected by time-varying random phase offsets, severely degrading, or even failing, direct sensing. Hence, to effectively enable ISAC, considerable research has been directed toward addressing the clock asynchronism issue in bi-static sensing. This paper provides an overview of the issue and existing techniques developed in an ISAC background. Based on the review and comparison, we also draw insights into the future research directions and open problems, aiming to nurture the maturation of bi-static sensing in ISAC.
△ Less
Submitted 24 June, 2024; v1 submitted 14 February, 2024;
originally announced February 2024.
-
Fundamental Trade-Offs in Monostatic ISAC: A Holistic Investigation Towards 6G
Authors:
Musa Furkan Keskin,
Mohammad Mahdi Mojahedian,
Carina Marcus,
Olof Eriksson,
Andrea Giorgetti,
Joerg Widmer,
Henk Wymeersch
Abstract:
Integrated sensing and communication (ISAC) emerges as a cornerstone technology for the upcoming 6G era, seamlessly incorporating sensing functionality into wireless networks as an inherent capability. This paper undertakes a holistic investigation of two fundamental trade-offs in monostatic OFDM ISAC systems-namely, the time-frequency domain trade-off and the spatial domain trade-off. To ensure r…
▽ More
Integrated sensing and communication (ISAC) emerges as a cornerstone technology for the upcoming 6G era, seamlessly incorporating sensing functionality into wireless networks as an inherent capability. This paper undertakes a holistic investigation of two fundamental trade-offs in monostatic OFDM ISAC systems-namely, the time-frequency domain trade-off and the spatial domain trade-off. To ensure robust sensing across diverse modulation orders in the time-frequency domain, including high-order QAM, we design a linear minimum mean-squared-error (LMMSE) estimator tailored for sensing with known, randomly generated signals of varying amplitude. Moreover, we explore spatial domain trade-offs through two ISAC transmission strategies: concurrent, employing joint beams, and time-sharing, using separate, time-non-overlapping beams for sensing and communications. Simulations demonstrate superior performance of the LMMSE estimator in detecting weak targets in the presence of strong ones under high-order QAM, consistently yielding more favorable ISAC trade-offs than existing baselines. Key insights into these trade-offs under various modulation schemes, SNR conditions, target radar cross section (RCS) levels and transmission strategies highlight the merits of the proposed LMMSE approach.
△ Less
Submitted 31 January, 2024;
originally announced January 2024.
-
An Experimental Prototype for Multistatic Asynchronous ISAC
Authors:
Marco Canil,
Jacopo Pegoraro,
Jesus O. Lacruz,
Marco Mezzavilla,
Michele Rossi,
Joerg Widmer,
Sundeep Rangan
Abstract:
We prototype and validate a multistatic mmWave ISAC system based on IEEE802.11ay. Compensation of the clock asynchrony between each TX and RX pair is performed using the sole LoS wireless signal propagation. As a result, our system provides concurrent target tracking and micro-Doppler estimation from multiple points of view, paving the way for practical multistatic data fusion. Our results on huma…
▽ More
We prototype and validate a multistatic mmWave ISAC system based on IEEE802.11ay. Compensation of the clock asynchrony between each TX and RX pair is performed using the sole LoS wireless signal propagation. As a result, our system provides concurrent target tracking and micro-Doppler estimation from multiple points of view, paving the way for practical multistatic data fusion. Our results on human movement sensing, complemented with precise, quantitative GT data, demonstrate the enhanced sensing capabilities of multistatic ISAC, due to the spatial diversity of the receiver nodes.
△ Less
Submitted 30 September, 2023;
originally announced October 2023.
-
DISC: a Dataset for Integrated Sensing and Communication in mmWave Systems
Authors:
Jacopo Pegoraro,
Jesus Omar Lacruz,
Michele Rossi,
Joerg Widmer
Abstract:
In this paper we present DISC, a dataset of millimeter-wave channel impulse response measurements for integrated human activity sensing and communication. This is the first dataset collected with a software-defined radio testbed that transmits 60 GHz IEEE 802-11ay-compliant packets and estimates the channel response including reflections of the signal on the moving body parts of subjects moving in…
▽ More
In this paper we present DISC, a dataset of millimeter-wave channel impulse response measurements for integrated human activity sensing and communication. This is the first dataset collected with a software-defined radio testbed that transmits 60 GHz IEEE 802-11ay-compliant packets and estimates the channel response including reflections of the signal on the moving body parts of subjects moving in an indoor environment. The provided data contain the contribution of 7 subjects performing 4 different activities. Differently from available radar-based millimeter-wave sensing datasets, our measurements are collected using both uniform packet transmission times and sparse traffic patterns from real Wi-Fi deployments. Thanks to these unique characteristics, DISC serves as a multi-purpose benchmarking tool for machine learning-based human activity recognition, radio frequency gait analysis, and sparse sensing algorithms for next-generation integrated sensing and communication.
△ Less
Submitted 28 June, 2024; v1 submitted 15 June, 2023;
originally announced June 2023.
-
Integrated Sensing and Communications with MIMO-OTFS
Authors:
Musa Furkan Keskin,
Carina Marcus,
Olof Eriksson,
Alex Alvarado,
Joerg Widmer,
Henk Wymeersch
Abstract:
Orthogonal time frequency space (OTFS) is a promising alternative to orthogonal frequency division multiplexing (OFDM) for high-mobility communications. We propose a novel multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system based on OTFS modulation. We begin by deriving new sensing and communication signal models for the proposed MIMO-OTFS ISAC system that expl…
▽ More
Orthogonal time frequency space (OTFS) is a promising alternative to orthogonal frequency division multiplexing (OFDM) for high-mobility communications. We propose a novel multiple-input multiple-output (MIMO) integrated sensing and communication (ISAC) system based on OTFS modulation. We begin by deriving new sensing and communication signal models for the proposed MIMO-OTFS ISAC system that explicitly capture inter-symbol interference (ISI) and inter-carrier interference (ICI) effects. We then develop a generalized likelihood ratio test (GLRT) based multi-target detection and delay-Doppler-angle estimation algorithm for MIMO-OTFS radar sensing that can simultaneously mitigate and exploit ISI/ICI effects, to prevent target masking and surpass standard unambiguous detection limits in range/velocity. Moreover, considering two operational modes (search/track), we propose an adaptive MIMO-OTFS ISAC transmission strategy. For the search mode, we introduce the concept of delay-Doppler (DD) multiplexing, enabling omnidirectional probing of the environment and large virtual array at the OTFS radar receiver. For the track mode, we pursue a directional transmission approach and design an OTFS ISAC optimization algorithm in spatial and DD domains, seeking the optimal trade-off between radar signal-to-noise ratio (SNR) and achievable rate. Simulation results verify the effectiveness of the proposed sensing algorithm and reveal valuable insights into OTFS ISAC trade-offs under varying communication channel characteristics.
△ Less
Submitted 10 June, 2023;
originally announced June 2023.
-
JUMP: Joint communication and sensing with Unsynchronized transceivers Made Practical
Authors:
Jacopo Pegoraro,
Jesus O. Lacruz,
Tommy Azzino,
Marco Mezzavilla,
Michele Rossi,
Joerg Widmer,
Sundeep Rangan
Abstract:
Wideband millimeter-wave communication systems can be extended to provide radar-like sensing capabilities on top of data communication, in a cost-effective manner. However, the development of joint communication and sensing technology is hindered by practical challenges, such as occlusions to the line-of-sight path and clock asynchrony between devices. The latter introduces time-varying timing and…
▽ More
Wideband millimeter-wave communication systems can be extended to provide radar-like sensing capabilities on top of data communication, in a cost-effective manner. However, the development of joint communication and sensing technology is hindered by practical challenges, such as occlusions to the line-of-sight path and clock asynchrony between devices. The latter introduces time-varying timing and frequency offsets that prevent the estimation of sensing parameters and, in turn, the use of standard signal processing solutions. Existing approaches cannot be applied to commonly used phased-array receivers, as they build on stringent assumptions about the multipath environment, and are computationally complex. We present JUMP, the first system enabling practical bistatic and asynchronous joint communication and sensing, while achieving accurate target tracking and micro-Doppler extraction in realistic conditions. Our system compensates for the timing offset by exploiting the channel correlation across subsequent packets. Further, it tracks multipath reflections and eliminates frequency offsets by observing the phase of a dynamically-selected static reference path. JUMP has been implemented on a 60 GHz experimental platform, performing extensive evaluations of human motion sensing, including non-line-of-sight scenarios. In our results, JUMP attains comparable tracking performance to a full-duplex monostatic system and similar micro-Doppler quality with respect to a phase-locked bistatic receiver.
△ Less
Submitted 8 June, 2024; v1 submitted 16 April, 2023;
originally announced April 2023.
-
Cross-Link Channel Prediction for Massive IoT Networks
Authors:
Kun Woo Cho,
Marco Cominelli,
Francesco Gringoli,
Joerg Widmer,
Kyle Jamieson
Abstract:
Tomorrow's massive-scale IoT sensor networks are poised to drive uplink traffic demand, especially in areas of dense deployment. To meet this demand, however, network designers leverage tools that often require accurate estimates of Channel State Information (CSI), which incurs a high overhead and thus reduces network throughput. Furthermore, the overhead generally scales with the number of client…
▽ More
Tomorrow's massive-scale IoT sensor networks are poised to drive uplink traffic demand, especially in areas of dense deployment. To meet this demand, however, network designers leverage tools that often require accurate estimates of Channel State Information (CSI), which incurs a high overhead and thus reduces network throughput. Furthermore, the overhead generally scales with the number of clients, and so is of special concern in such massive IoT sensor networks. While prior work has used transmissions over one frequency band to predict the channel of another frequency band on the same link, this paper takes the next step in the effort to reduce CSI overhead: predict the CSI of a nearby but distinct link. We propose Cross-Link Channel Prediction (CLCP), a technique that leverages multi-view representation learning to predict the channel response of a large number of users, thereby reducing channel estimation overhead further than previously possible. CLCP's design is highly practical, exploiting channel estimates obtained from existing transmissions instead of dedicated channel sounding or extra pilot signals. We have implemented CLCP for two different Wi-Fi versions, namely 802.11n and 802.11ax, the latter being the leading candidate for future IoT networks. We evaluate CLCP in two large-scale indoor scenarios involving both line-of-sight and non-line-of-sight transmissions with up to 144 different 802.11ax users. Moreover, we measure its performance with four different channel bandwidths, from 20 MHz up to 160 MHz. Our results show that CLCP provides a 2x throughput gain over baseline 802.11ax and a 30 percent throughput gain over existing cross-band prediction algorithms.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
SPARCS: A Sparse Recovery Approach for Integrated Communication and Human Sensing in mmWave Systems
Authors:
Jacopo Pegoraro,
Jesus Omar Lacruz,
Michele Rossi,
Joerg Widmer
Abstract:
A well established method to detect and classify human movements using Millimeter-Wave ( mmWave) devices is the time-frequency analysis of the small-scale Doppler effect (termed micro-Doppler) of the different body parts, which requires a regularly spaced and dense sampling of the Channel Impulse Response ( CIR). This is currently done in the literature either using special-purpose radar sensors,…
▽ More
A well established method to detect and classify human movements using Millimeter-Wave ( mmWave) devices is the time-frequency analysis of the small-scale Doppler effect (termed micro-Doppler) of the different body parts, which requires a regularly spaced and dense sampling of the Channel Impulse Response ( CIR). This is currently done in the literature either using special-purpose radar sensors, or interrupting communications to transmit dedicated sensing waveforms, entailing high overhead and channel utilization. In this work we present SPARCS, an integrated human sensing and communication solution for mmWave systems. SPARCS is the first method that reconstructs high quality signatures of human movement from irregular and sparse CIR samples, such as the ones obtained during communication traffic patterns. To accomplish this, we formulate the micro-Doppler extraction as a sparse recovery problem, which is critical to enable a smooth integration between communication and sensing. Moreover, if needed, our system can seamlessly inject short CIR estimation fields into the channel whenever communication traffic is absent or insufficient for the micro-Doppler extraction. SPARCS effectively leverages the intrinsic sparsity of the mmWave channel, thus drastically reducing the sensing overhead with respect to available approaches. We implemented SPARCS on an IEEE 802.11ay Software Defined Radio (SDR) platform working in the 60 GHz band, collecting standard-compliant CIR traces matching the traffic patterns of real WiFi access points. Our results show that the micro-Doppler signatures obtained by SPARCS enable a typical downstream application such as human activity recognition with more than 7 times lower overhead with respect to existing methods, while achieving better recognition performance.
△ Less
Submitted 6 May, 2022;
originally announced May 2022.
-
RAPID: Retrofitting IEEE 802.11ay Access Points for Indoor Human Detection and Sensing
Authors:
Jacopo Pegoraro,
Jesus Omar Lacruz,
Francesca Meneghello,
Enver Bashirov,
Michele Rossi,
Joerg Widmer
Abstract:
In this work we present RAPID, the first joint communication and radar system based on next-generation IEEE 802.11ay WiFi networks operating in the 60 GHz band. Unlike existing approaches for human sensing at millimeter-wave frequencies, which rely on special-purpose radars, RAPID achieves radar-level sensing accuracy with IEEE 802.11ay access points, thus avoiding the burden of installing ad-hoc…
▽ More
In this work we present RAPID, the first joint communication and radar system based on next-generation IEEE 802.11ay WiFi networks operating in the 60 GHz band. Unlike existing approaches for human sensing at millimeter-wave frequencies, which rely on special-purpose radars, RAPID achieves radar-level sensing accuracy with IEEE 802.11ay access points, thus avoiding the burden of installing ad-hoc sensors. RAPID enables contactless human sensing applications, such as people tracking, Human Activity Recognition (HAR), and person identification without requiring modifications to the standard packet structure. Specifically, we leverage IEEE 802.11ay beam training to accurately localize and track multiple individuals within the same environment. Then, we propose a new way of using beam tracking to extract micro-Doppler signatures from the time-varying Channel Impulse Response (CIR) estimated from reflected packets. Such signatures are fed to a deep learning classifier to perform HAR and person identification. RAPID is implemented on a cutting-edge IEEE 802.11ay-compatible FPGA platform with phased antenna arrays, and evaluated on a large dataset of CIR measurements. It is robust across different environments and subjects, and outperforms state-of-the-art sub-6 GHz WiFi sensing techniques. Using two access points, RAPID reliably tracks multiple subjects, reaching HAR and person identification accuracies of 94% and 90%, respectively.
△ Less
Submitted 25 June, 2024; v1 submitted 10 September, 2021;
originally announced September 2021.
-
Few-Shot Domain Adaptation For End-to-End Communication
Authors:
Jayaram Raghuram,
Yijing Zeng,
Dolores García Martí,
Rafael Ruiz Ortiz,
Somesh Jha,
Joerg Widmer,
Suman Banerjee
Abstract:
The problem of end-to-end learning of a communication system using an autoencoder -- consisting of an encoder, channel, and decoder modeled using neural networks -- has recently been shown to be a promising approach. A challenge faced in the practical adoption of this learning approach is that under changing channel conditions (e.g. a wireless link), it requires frequent retraining of the autoenco…
▽ More
The problem of end-to-end learning of a communication system using an autoencoder -- consisting of an encoder, channel, and decoder modeled using neural networks -- has recently been shown to be a promising approach. A challenge faced in the practical adoption of this learning approach is that under changing channel conditions (e.g. a wireless link), it requires frequent retraining of the autoencoder in order to maintain a low decoding error rate. Since retraining is both time consuming and requires a large number of samples, it becomes impractical when the channel distribution is changing quickly. We propose to address this problem using a fast and sample-efficient (few-shot) domain adaptation method that does not change the encoder and decoder networks. Different from conventional training-time unsupervised or semi-supervised domain adaptation, here we have a trained autoencoder from a source distribution, that we want to adapt (at test time) to a target distribution using only a small labeled dataset and no unlabeled data. Our method focuses on a Gaussian mixture density network based channel model, and formulates its adaptation based on class and component-conditional affine transformations. The learned affine transformations are used to design an optimal input transformation at the decoder to compensate for the distribution shift, and effectively present to the decoder inputs close to the source distribution. Experiments on a real mmWave FPGA setup as well as a number of simulated distribution changes common to the wireless setting demonstrate the effectiveness of our method at adaptation using very small number of target domain samples.
△ Less
Submitted 25 July, 2022; v1 submitted 2 August, 2021;
originally announced August 2021.
-
Adaptive Mechanism for Distributed Opportunistic Scheduling
Authors:
Andres Garcia-Saavedra,
Albert Banchs,
Pablo Serrano,
Joerg Widmer
Abstract:
Distributed Opportunistic Scheduling (DOS) techniques have been recently proposed to improve the throughput performance of wireless networks. With DOS, each station contends for the channel with a certain access probability. If a contention is successful, the station measures the channel conditions and transmits in case the channel quality is above a certain threshold. Otherwise, the station does…
▽ More
Distributed Opportunistic Scheduling (DOS) techniques have been recently proposed to improve the throughput performance of wireless networks. With DOS, each station contends for the channel with a certain access probability. If a contention is successful, the station measures the channel conditions and transmits in case the channel quality is above a certain threshold. Otherwise, the station does not use the transmission opportunity, allowing all stations to recontend. A key challenge with DOS is to design a distributed algorithm that optimally adjusts the access probability and the threshold of each station. To address this challenge, in this paper we first compute the configuration of these two parameters that jointly optimizes throughput performance in terms of proportional fairness. Then, we propose an adaptive algorithm based on control theory that converges to the desired point of operation. Finally, we conduct a control theoretic analysis of the algorithm to find a setting for its parameters that provides a good tradeoff between stability and speed of convergence. Simulation results validate the design of the proposed mechanism and confirm its advantages over previous proposals.
△ Less
Submitted 15 December, 2014;
originally announced December 2014.