-
Characterisation of the Beamstrahlung radiation at FCC-ee
Authors:
Manuela Boscolo,
Andrea Ciarma
Abstract:
Beamstrahlung is a dominant effect in the beam dynamics of the high luminosity next-generation lepton collider FCC-ee. We characterize the beamstrahlung radiation for the beam parameters at the four working energies, from the Z-pole to the $t\bar{t}$ threshold, and present the effect of this radiation in the Machine-Detector-Interface region. We discuss the conceptual need for a photon dump due to…
▽ More
Beamstrahlung is a dominant effect in the beam dynamics of the high luminosity next-generation lepton collider FCC-ee. We characterize the beamstrahlung radiation for the beam parameters at the four working energies, from the Z-pole to the $t\bar{t}$ threshold, and present the effect of this radiation in the Machine-Detector-Interface region. We discuss the conceptual need for a photon dump due to the high power produced, which is in the order of hundreds of kilowatts. We also discuss the detector induced backgrounds due to the incoherent $e^+e^-$ pairs produced by the interaction of the beamstrahlung photons at the IP.
△ Less
Submitted 28 July, 2023;
originally announced July 2023.
-
Future Circular Lepton Collider FCC-ee: Overview and Status
Authors:
I. Agapov,
M. Benedikt,
A. Blondel,
M. Boscolo,
O. Brunner,
M. Chamizo Llatas,
T. Charles,
D. Denisov,
W. Fischer,
E. Gianfelice-Wendt,
J. Gutleber,
P. Janot,
M. Koratzinos,
R. Losito,
S. Nagaitsev,
K. Oide,
T. Raubenheimer,
R. Rimmer,
J. Seeman,
D. Shatilov,
V. Shiltsev,
M. Sullivan,
U. Wienands,
F. Zimmermann
Abstract:
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and,…
▽ More
The worldwide High Energy Physics community widely agrees that the next collider should be a Higgs factory. Acknowledging this priority, in 2021 CERN has launched the international Future Circular Collider (FCC) Feasibility Study (FS). The FCC Integrated Project foresees, in a first stage, a high-luminosity high-energy electron-positron collider, serving as Higgs, top and electroweak factory, and, in a second stage, an energy frontier hadron collider, with a centre-of-mass energy of at least 100 TeV. In this paper, we address a few key elements of the FCC-ee accelerator design, its performance reach, and underlying technologies, as requested by the Snowmass process. The Conceptual Design Report for the FCC, published in 2019, serves as our primary reference. We also summarize a few recent changes and improvements.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Review and outlook of accelerator-related codes and their interplay with the experiments software
Authors:
Manuela Boscolo,
Helmut Burkhardt,
Gerardo Ganis,
Clément Helsens
Abstract:
Powerful flexible computer codes are essential for the design and optimisation of accelerator and experiments. We briefly review what already exists and what is needed in terms of accelerator codes. For the FCC-ee it will be important to include the effects of beamstrahlung and beam-beam interaction as well as machine imperfections and sources of beam induced backgrounds relevant for the experimen…
▽ More
Powerful flexible computer codes are essential for the design and optimisation of accelerator and experiments. We briefly review what already exists and what is needed in terms of accelerator codes. For the FCC-ee it will be important to include the effects of beamstrahlung and beam-beam interaction as well as machine imperfections and sources of beam induced backgrounds relevant for the experiments and consider the possibility of beam-polarisation. The experiment software Key4hep, which aims to provide a common software stack for future experiments, is described and the possibility of extending this concept to machine codes is discussed. We analyse how to interface and connect the accelerator and experiment codes in an efficient and flexible way for optimisation of the FCC-ee interaction region design, and discuss the possibility of using shared data formats as an interface.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
-
FCC-hh Experimental Insertion Region Design
Authors:
Jose L. Abelleira,
Robert B. Appleby,
Sergey Arsenyev,
Javier Barranco,
Michael Benedikt,
Maria Ilaria Besana,
Oscar Blanco Garcia,
Manuela Boscolo,
David Boutin,
Xavier Buffat,
Helmut Burkhardt,
Francesco Cerutti,
Antoine Chance,
Francesco Collamati,
Emilia Cruz-Alaniz,
Barbara Dalena,
Michael Hofer,
Barbara L. Humann,
Angelo Infantino,
Jacqueline Keintzel,
Andy Langner,
Marian Luckhof,
Roman Martin,
Tatiana Pieloni,
Haroon Rafique
, et al. (7 additional authors not shown)
Abstract:
The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insert…
▽ More
The Future Circular Collider study is exploring possible designs of circular colliders for the post-LHC era, as recommended by the European Strategy Group for High Energy Physics. One such option is FCC-hh, a proton-proton collider with a centre-of-mass energy of 100 TeV. The experimental insertion regions are key areas defining the performance of the collider. This paper presents the first insertion region designs with a complete assessment of the main challenges, as collision debris with two orders of magnitude larger power than current colliders, beam-beam interactions in long insertions, dynamic aperture for optics with peak $β$ functions one order of magnitude above current colliders, photon background from synchrotron radiation and cross talk between the insertion regions. An alternative design avoiding the use of crab cavities with a small impact on performance is also presented.
△ Less
Submitted 23 July, 2020;
originally announced July 2020.
-
Study of muon pair production from positron annihilation at threshold energy
Authors:
N. Amapane,
M. Antonelli,
F. Anulli,
G. Ballerini,
L. Bandiera,
N. Bartosik,
M. Bauce,
A. Bertolin,
C. Biino,
O. R. Blanco-Garcia,
M. Boscolo,
C. Brizzolari,
A. Cappati,
M. Casarsa,
G. Cavoto,
F. Collamati,
G. Cotto,
C. Curatolo,
R. Di Nardo,
F. Gonella,
S. Hoh,
M. Iafrati,
F. Iacoangeli,
B. Kiani,
D. Lucchesi
, et al. (17 additional authors not shown)
Abstract:
The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small…
▽ More
The muon collider represents one of the most promising solutions for a future machine exploring the high energy frontier, but several challenges due to the 2.2 $μ$sec muon lifetime at rest have to be carefully considered. The LEMMA project is investigating the possibility of producing low emittance muon/antimuon pairs from the e$^+$e$^-$ annihilation process at threshold energy, resulting in small transverse emittance beams without any additional beam cooling. However most of the measurements available are performed at higher $\sqrt{s}$ values. It is therefore necessary to measure muons production in positron annihilation at threshold energy and compare the experimental results with the predictions in this specific energy regime. Apart from being a topic of physical interest by itself, these near to threshold measurements can have a sizeable impact on the estimation of the ultimate luminosity achievable in a muon collider with the LEMMA injection scheme.
△ Less
Submitted 10 January, 2020; v1 submitted 30 September, 2019;
originally announced September 2019.
-
FCC-ee: Your Questions Answered
Authors:
Alain Blondel,
Patrick Janot,
Niloufar Alipour Tehrani,
Patrizia Azzi,
Paolo Azzurri,
Nicola Bacchetta,
Michael Benedikt,
Freya Blekman,
Manuela Boscolo,
Mogens Dam,
Stefania De Curtis,
David d'Enterria,
John Ellis,
Gerardo Ganis,
Janusz Gluza,
Clément Helsens,
Staszek Jadach,
Mike Koratzinos,
Markus Klute,
Christos Leonidopoulos,
Elizabeth Locci,
Michelangelo Mangano,
Stéphane Monteil,
Katsunobu Oide,
Vitaly Okorokov
, et al. (7 additional authors not shown)
Abstract:
This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 20…
▽ More
This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 2020 of the European Strategy Group recommendations. This document will be regularly updated as more questions appear or new information becomes available.
△ Less
Submitted 6 June, 2019;
originally announced June 2019.
-
Positron driven muon source for a muon collider
Authors:
D. Alesini,
M. Antonelli,
M. E. Biagini,
M. Boscolo,
O. R. Blanco-García,
A. Ciarma,
R. Cimino,
M. Iafrati,
A. Giribono,
S. Guiducci,
L. Pellegrino,
M. Rotondo,
C. Vaccarezza,
A. Variola,
A. Allegrucci,
F. Anulli,
M. Bauce,
F. Collamati,
G. Cavoto,
G. Cesarini,
F. Iacoangeli,
R. Li Voti,
A. Bacci,
I. Drebot,
P. Raimondi
, et al. (33 additional authors not shown)
Abstract:
The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted an…
▽ More
The design of a future multi-TeV muon collider needs new ideas to overcome the technological challenges related to muon production, cooling, accumulation and acceleration. In this paper a layout of a positron driven muon source known as the Low EMittance Muon Accelerator (LEMMA) concept is presented. The positron beam, stored in a ring with high energy acceptance and low emittance, is extracted and driven to a multi-target system, to produce muon pairs at threshold. This solution alleviates the issues related to the power deposited and the integrated Peak Energy Density Deposition (PEDD) on the targets. Muons produced in the multi-target system will then be accumulated before acceleration and injection in the collider. A multi-target line lattice has been designed to cope with the focusing of both the positron and muon beams. Studies on the number, material and thickness of the targets have been carried out. A general layout of the overall scheme and a description is presented, as well as plans for future R&D.
△ Less
Submitted 19 May, 2019; v1 submitted 14 May, 2019;
originally announced May 2019.
-
Machine detector interface for the $e^+e^-$ future circular collider
Authors:
Manuela Boscolo,
Oscar Blanco-Garcia,
Nicola Bacchetta,
Eleonora Belli,
Michael Benedikt,
Helmut Burkhardt,
Miguel Gil Costa,
Konrad Elsener,
Emilia Leogrande,
Patrick Janot,
Herman Ten Kate,
Dima El Khechen,
Anna Kolano,
Roberto Kersevan,
Marian Lueckof,
Katsunobu Oide,
Emmanuel Perez,
Nilou Teherani,
O. Viazlo,
Yorgos Voutsinas,
Frank Zimmermann,
Mogens Dam,
Alain Blondel,
M. Koratzinos,
Alexander Novokhatski
, et al. (5 additional authors not shown)
Abstract:
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision s…
▽ More
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision scheme has been chosen for the design and it will be compatible with all beam energies. In this paper we will describe the machine detector interface layout including the solenoid compensation scheme. We will describe how this layout fulfills all the requirements set by the parameters table and by the physical constraints. We will summarize the studies of the impact of the synchrotron radiation, the analysis of trapped modes and of the backgrounds induced by single beam and luminosity effects giving an estimate of the losses in the interaction region and in the detector.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
The future prospects of muon colliders and neutrino factories
Authors:
Manuela Boscolo,
Jean Pierre Delahaye,
Mark Palmer
Abstract:
The potential of muon beams for high energy physics applications is described along with the challenges of producing high quality muon beams. Two proposed approaches for delivering high intensity muon beams, a proton driver source and a positron driver source, are described and compared. The proton driver concepts are based on the studies from the Muon Accelerator Program (MAP). The MAP effort foc…
▽ More
The potential of muon beams for high energy physics applications is described along with the challenges of producing high quality muon beams. Two proposed approaches for delivering high intensity muon beams, a proton driver source and a positron driver source, are described and compared. The proton driver concepts are based on the studies from the Muon Accelerator Program (MAP). The MAP effort focused on a path to deliver muon-based facilities, ranging from neutrino factories to muon colliders, that could span research needs at both the intensity and energy frontiers. The Low EMittance Muon Accelerator (LEMMA) concept, which uses a positron-driven source, provides an attractive path to very high energy lepton colliders with improved particle backgrounds. The recent study of a 14 TeV muon collider in the LHC tunnel, which could leverage the existing CERN injectors and infrastructure and provide physics reach comparable to the 100 TeV FCC-hh, at lower cost and with cleaner physics conditions, is also discussed. The present status of the design and R&D efforts towards each of these sources is described. A summary of important R&D required to establish a facility path for each concept is also presented.
△ Less
Submitted 28 March, 2019; v1 submitted 6 August, 2018;
originally announced August 2018.
-
Design of beam optics for the Future Circular Collider e+e- -collider rings
Authors:
K. Oide,
M. Aiba,
S. Aumon,
M. Benedikt,
A. Blondel,
A. Bogomyagkov,
M. Boscolo,
H. Burkhardt,
Y. Cai,
A. Doblhammer,
B. Haerer,
B. Holzer,
J. M. Jowett,
I. Koop,
M. Koratzinos,
E. Levichev,
L. Medina,
K. Ohmi,
Y. Papaphilippou,
P. Piminov,
D. Shatilov,
S. Sinyatkin,
M. Sullivan,
J. Wenninger,
U. Wienands
, et al. (2 additional authors not shown)
Abstract:
A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromatici…
▽ More
A beam optics scheme has been designed for the Future Circular Collider-e+e- (FCC-ee). The main characteristics of the design are: beam energy 45 to 175 GeV, 100 km circumference with two interaction points (IPs) per ring, horizontal crossing angle of 30 mrad at the IP and the crab-waist scheme [1] with local chromaticity correction. The crab-waist scheme is implemented within the local chromaticity correction system without additional sextupoles, by reducing the strength of one of the two sextupoles for vertical chromatic correction at each side of the IP. So-called "tapering" of the magnets is applied, which scales all fields of the magnets according to the local beam energy to compensate for the effect of synchrotron radiation (SR) loss along the ring. An asymmetric layout near the interaction region reduces the critical energy of SR photons on the incoming side of the IP to values below 100 keV, while matching the geometry to the beam line of the FCC proton collider (FCC-hh) [2] as closely as possible. Sufficient transverse/longitudinal dynamic aperture (DA) has been obtained, including major dynamical effects, to assure an adequate beam lifetime in the presence of beamstrahlung and top-up injection. In particular, a momentum acceptance larger than +/-2% has been obtained, which is better than the momentum acceptance of typical collider rings by about a factor of 2. The effects of the detector solenoids including their compensation elements are taken into account as well as synchrotron radiation in all magnets. The optics presented in this paper is a step toward a full conceptual design for the collider. A number of issues have been identified for further study.
△ Less
Submitted 23 October, 2016;
originally announced October 2016.
-
First Look at the Physics Case of TLEP
Authors:
M. Bicer,
H. Duran Yildiz,
I. Yildiz,
G. Coignet,
M. Delmastro,
T. Alexopoulos,
C. Grojean,
S. Antusch,
T. Sen,
H. -J. He,
K. Potamianos,
S. Haug,
A. Moreno,
A. Heister,
V. Sanz,
G. Gomez-Ceballos,
M. Klute,
M. Zanetti,
L. -T. Wang,
M. Dam,
C. Boehm,
N. Glover,
F. Krauss,
A. Lenz,
M. Syphers
, et al. (106 additional authors not shown)
Abstract:
The discovery by the ATLAS and CMS experiments of a new boson with mass around 125 GeV and with measured properties compatible with those of a Standard-Model Higgs boson, coupled with the absence of discoveries of phenomena beyond the Standard Model at the TeV scale, has triggered interest in ideas for future Higgs factories. A new circular e+e- collider hosted in a 80 to 100 km tunnel, TLEP, is a…
▽ More
The discovery by the ATLAS and CMS experiments of a new boson with mass around 125 GeV and with measured properties compatible with those of a Standard-Model Higgs boson, coupled with the absence of discoveries of phenomena beyond the Standard Model at the TeV scale, has triggered interest in ideas for future Higgs factories. A new circular e+e- collider hosted in a 80 to 100 km tunnel, TLEP, is among the most attractive solutions proposed so far. It has a clean experimental environment, produces high luminosity for top-quark, Higgs boson, W and Z studies, accommodates multiple detectors, and can reach energies up to the t-tbar threshold and beyond. It will enable measurements of the Higgs boson properties and of Electroweak Symmetry-Breaking (EWSB) parameters with unequalled precision, offering exploration of physics beyond the Standard Model in the multi-TeV range. Moreover, being the natural precursor of the VHE-LHC, a 100 TeV hadron machine in the same tunnel, it builds up a long-term vision for particle physics. Altogether, the combination of TLEP and the VHE-LHC offers, for a great cost effectiveness, the best precision and the best search reach of all options presently on the market. This paper presents a first appraisal of the salient features of the TLEP physics potential, to serve as a baseline for a more extensive design study.
△ Less
Submitted 11 December, 2013; v1 submitted 28 August, 2013;
originally announced August 2013.
-
IRIDE White Book, An Interdisciplinary Research Infrastructure based on Dual Electron linacs&lasers
Authors:
D. Alesini,
M. Alessandroni,
M. P. Anania,
S. Andreas,
M. Angelone,
A. Arcovito,
F. Arnesano,
M. Artioli,
L. Avaldi,
D. Babusci,
A. Bacci,
A. Balerna,
S. Bartalucci,
R. Bedogni,
M. Bellaveglia,
F. Bencivenga,
M. Benfatto,
S. Biedron,
V. Bocci,
M. Bolognesi,
P. Bolognesi,
R. Boni,
R. Bonifacio,
M. Boscolo,
F. Boscherini
, et al. (189 additional authors not shown)
Abstract:
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high ener…
▽ More
This report describes the scientific aims and potentials as well as the preliminary technical design of IRIDE, an innovative tool for multi-disciplinary investigations in a wide field of scientific, technological and industrial applications. IRIDE will be a high intensity 'particle factory', based on a combination of a high duty cycle radio-frequency superconducting electron linac and of high energy lasers. Conceived to provide unique research possibilities for particle physics, for condensed matter physics, chemistry and material science, for structural biology and industrial applications, IRIDE will open completely new research possibilities and advance our knowledge in many branches of science and technology. IRIDE will contribute to open new avenues of discoveries and to address most important riddles: What does matter consist of? What is the structure of proteins that have a fundamental role in life processes? What can we learn from protein structure to improve the treatment of diseases and to design more efficient drugs? But also how does an electronic chip behave under the effect of radiations? How can the heat flow in a large heat exchanger be optimized? The scientific potential of IRIDE is far reaching and justifies the construction of such a large facility in Italy in synergy with the national research institutes and companies and in the framework of the European and international research. It will impact also on R&D work for ILC, FEL, and will be complementarity to other large scale accelerator projects. IRIDE is also intended to be realized in subsequent stages of development depending on the assigned priorities.
△ Less
Submitted 30 July, 2013;
originally announced July 2013.
-
SuperB Technical Design Report
Authors:
SuperB Collaboration,
M. Baszczyk,
P. Dorosz,
J. Kolodziej,
W. Kucewicz,
M. Sapor,
A. Jeremie,
E. Grauges Pous,
G. E. Bruno,
G. De Robertis,
D. Diacono,
G. Donvito,
P. Fusco,
F. Gargano,
F. Giordano,
F. Loddo,
F. Loparco,
G. P. Maggi,
V. Manzari,
M. N. Mazziotta,
E. Nappi,
A. Palano,
B. Santeramo,
I. Sgura,
L. Silvestris
, et al. (384 additional authors not shown)
Abstract:
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/ch…
▽ More
In this Technical Design Report (TDR) we describe the SuperB detector that was to be installed on the SuperB e+e- high luminosity collider. The SuperB asymmetric collider, which was to be constructed on the Tor Vergata campus near the INFN Frascati National Laboratory, was designed to operate both at the Upsilon(4S) center-of-mass energy with a luminosity of 10^{36} cm^{-2}s^{-1} and at the tau/charm production threshold with a luminosity of 10^{35} cm^{-2}s^{-1}. This high luminosity, producing a data sample about a factor 100 larger than present B Factories, would allow investigation of new physics effects in rare decays, CP Violation and Lepton Flavour Violation. This document details the detector design presented in the Conceptual Design Report (CDR) in 2007. The R&D and engineering studies performed to arrive at the full detector design are described, and an updated cost estimate is presented.
A combination of a more realistic cost estimates and the unavailability of funds due of the global economic climate led to a formal cancelation of the project on Nov 27, 2012.
△ Less
Submitted 24 June, 2013;
originally announced June 2013.
-
Proposal for taking data with the KLOE-2 detector at the DA$Φ$NE collider upgraded in energy
Authors:
D. Babusci,
C. Bini,
F. Bossi,
G. Isidori,
D. Moricciani,
F. Nguyen,
P. Raimondi,
G. Venanzoni,
D. Alesini,
F. Archilli,
D. Badoni,
R. Baldini-Ferroli,
M. Bellaveglia,
G. Bencivenni,
M. Bertani,
M. Biagini,
C. Biscari,
C. Bloise,
V. Bocci,
R. Boni,
M. Boscolo,
P. Branchini,
A. Budano,
S. A. Bulychjev,
B. Buonomo
, et al. (97 additional authors not shown)
Abstract:
This document reviews the physics program of the KLOE-2 detector at DA$Φ$NE upgraded in energy and provides a simple solution to run the collider above the $φ$-peak (up to 2, possibly 2.5 GeV). It is shown how a precise measurement of the multihadronic cross section in the energy region up to 2 (possibly 2.5) GeV would have a major impact on the tests of the Standard Model through a precise determ…
▽ More
This document reviews the physics program of the KLOE-2 detector at DA$Φ$NE upgraded in energy and provides a simple solution to run the collider above the $φ$-peak (up to 2, possibly 2.5 GeV). It is shown how a precise measurement of the multihadronic cross section in the energy region up to 2 (possibly 2.5) GeV would have a major impact on the tests of the Standard Model through a precise determination of the anomalous magnetic moment of the muon and the effective fine-structure constant at the $M_Z$ scale. With a luminosity of about $10^{32}$cm$^{-2}$s$^{-1}$, DA$Φ$NE upgraded in energy can perform a scan in the region from 1 to 2.5 GeV in one year by collecting an integrated luminosity of 20 pb$^{-1}$ (corresponding to a few days of data taking) for single point, assuming an energy step of 25 MeV. A few years of data taking in this region would provide important tests of QCD and effective theories by $γγ$ physics with open thresholds for pseudo-scalar (like the $η'$), scalar ($f_0,f'_0$, etc...) and axial-vector ($a_1$, etc...) mesons; vector-mesons spectroscopy and baryon form factors; tests of CVC and searches for exotics. In the final part of the document a technical solution for the energy upgrade of DA$Φ$NE is proposed.
△ Less
Submitted 29 July, 2010;
originally announced July 2010.
-
Measurement of the luminosity at the DAFNE collider upgraded with the crab waist scheme
Authors:
M. Boscolo,
F. Bossi,
B. Buonomo,
G. Mazzitelli,
F. Murtas,
P. Raimondi,
G. Sensolini,
M. Schioppa,
F. Iacoangeli,
P. Valente,
N. Arnaud,
D. Breton,
L. Burmistrov,
A. Stocchi,
A. Variola,
B. Viaud,
P. Branchini
Abstract:
The test of the crab waist collision scheme, undergoing at the e+e- Frascati DAFNE accelerator complex since February 2008, requires a fast and accurate measurement of the absolute luminosity, as well as a full characterization of the background conditions. Three different monitors, a Bhabha calorimeter, a Bhabha GEM tracker and a gamma bremsstrahlung proportional counter have been designed, tes…
▽ More
The test of the crab waist collision scheme, undergoing at the e+e- Frascati DAFNE accelerator complex since February 2008, requires a fast and accurate measurement of the absolute luminosity, as well as a full characterization of the background conditions. Three different monitors, a Bhabha calorimeter, a Bhabha GEM tracker and a gamma bremsstrahlung proportional counter have been designed, tested and installed around the interaction point end of 2007-beginning of 2008. In this paper, we describe these detectors and present their performances in various operation conditions during the 2008 and 2009 DAFNE runs.
△ Less
Submitted 10 September, 2009;
originally announced September 2009.
-
Background issues at SUPERDAFNE
Authors:
M. Boscolo
Abstract:
DAFNE induced backgrounds are dominated by Touschek scattering [1]. A luminosity upgrade of the machine at the same beam energy would be obtained essentially by increasing the bunch density, that in principle would increase this particle loss process. Some preliminary studies and general considerations of the Touschek effect for the DAFNE high luminosity upgrade are presented here.
DAFNE induced backgrounds are dominated by Touschek scattering [1]. A luminosity upgrade of the machine at the same beam energy would be obtained essentially by increasing the bunch density, that in principle would increase this particle loss process. Some preliminary studies and general considerations of the Touschek effect for the DAFNE high luminosity upgrade are presented here.
△ Less
Submitted 14 May, 2004;
originally announced May 2004.
