-
The Future Circular Collider: a Summary for the US 2021 Snowmass Process
Authors:
G. Bernardi,
E. Brost,
D. Denisov,
G. Landsberg,
M. Aleksa,
D. d'Enterria,
P. Janot,
M. L. Mangano,
M. Selvaggi,
F. Zimmermann,
J. Alcaraz Maestre,
C. Grojean,
R. M. Harris,
A. Pich,
M. Vos,
S. Heinemeyer,
P. Giacomelli,
P. Azzi,
F. Bedeschi,
M. Klute,
A. Blondel,
C. Paus,
F. Simon,
M. Dam,
E. Barberis
, et al. (19 additional authors not shown)
Abstract:
In this white paper for the 2021 Snowmass process, we give a description of the proposed Future Circular Collider (FCC) project and its physics program. The paper summarizes and updates the discussion submitted to the European Strategy on Particle Physics. After construction of an approximately 90 km tunnel, an electron-positron collider based on established technologies allows world-record instan…
▽ More
In this white paper for the 2021 Snowmass process, we give a description of the proposed Future Circular Collider (FCC) project and its physics program. The paper summarizes and updates the discussion submitted to the European Strategy on Particle Physics. After construction of an approximately 90 km tunnel, an electron-positron collider based on established technologies allows world-record instantaneous luminosities at center-of-mass energies from the Z resonance up to tt thresholds, enabling a rich set of fundamental measurements including Higgs couplings determinations at the sub percent level, precision tests of the weak and strong forces, and searches for new particles, including dark matter, both directly and via virtual corrections or mixing. Among other possibilities, the FCC-ee will be able to (i) indirectly discover new particles coupling to the Higgs and/or electroweak bosons up to scales around 7 and 50 TeV, respectively; (ii) perform competitive SUSY tests at the loop level in regions not accessible at the LHC; (iii) study heavy-flavor and tau physics in ultra-rare decays beyond the LHC reach, and (iv) achieve the best potential in direct collider searches for dark matter, sterile neutrinos, and axion-like particles with masses up to around 90 GeV. The tunnel can then be reused for a proton-proton collider, establishing record center-of-mass collision energy, allowing unprecedented reach for direct searches for new particles up to the around 50 TeV scale, and a diverse program of measurements of the Standard Model and Higgs boson, including a precision measurement of the Higgs self-coupling, and conclusively testing weakly-interacting massive particle scenarios of thermal relic dark matter.
△ Less
Submitted 19 December, 2022; v1 submitted 12 March, 2022;
originally announced March 2022.
-
Tracking Triggers for the HL-LHC
Authors:
Anders Ryd,
Louise Skinnari
Abstract:
Hardware-based track reconstruction in the CMS and ATLAS trigger systems for the High-Luminosity LHC upgrade will provide unique capabilities. An overview is presented of earlier track trigger systems at hadron colliders, in particular for the Tevatron CDF and D0 experiments. We discuss the plans of the CMS and ATLAS experiments to implement hardware-based track reconstruction for the High-Luminos…
▽ More
Hardware-based track reconstruction in the CMS and ATLAS trigger systems for the High-Luminosity LHC upgrade will provide unique capabilities. An overview is presented of earlier track trigger systems at hadron colliders, in particular for the Tevatron CDF and D0 experiments. We discuss the plans of the CMS and ATLAS experiments to implement hardware-based track reconstruction for the High-Luminosity LHC. Particular focus is placed on the track trigger capability of the upgraded CMS experiment. We discuss the challenges and opportunities of this novel handle, and review the alternatives that were considered for its implementation as well as discuss the expected performance. The planned track trigger systems for CMS and ATLAS have different goals, and we compare and contrast the two approaches.
△ Less
Submitted 23 October, 2020;
originally announced October 2020.
-
FPGA-based tracking for the CMS Level-1 trigger using the tracklet algorithm
Authors:
E. Bartz,
G. Boudoul,
R. Bucci,
J. Chaves,
E. Clement,
D. Cranshaw,
S. Dutta,
Y. Gershtein,
R. Glein,
K. Hahn,
E. Halkiadakis,
M. Hildreth,
S. Kyriacou,
K. Lannon,
A. Lefeld,
Y. Liu,
E. MacDonald,
N. Pozzobon,
A. Ryd,
K. Salyer,
P. Shields,
L. Skinnari,
K. Stenson,
R. Stone,
C. Strohman
, et al. (9 additional authors not shown)
Abstract:
The high instantaneous luminosities expected following the upgrade of the Large Hadron Collider (LHC) to the High Luminosity LHC (HL-LHC) pose major experimental challenges for the CMS experiment. A central component to allow efficient operation under these conditions is the reconstruction of charged particle trajectories and their inclusion in the hardware-based trigger system. There are many cha…
▽ More
The high instantaneous luminosities expected following the upgrade of the Large Hadron Collider (LHC) to the High Luminosity LHC (HL-LHC) pose major experimental challenges for the CMS experiment. A central component to allow efficient operation under these conditions is the reconstruction of charged particle trajectories and their inclusion in the hardware-based trigger system. There are many challenges involved in achieving this: a large input data rate of about 20--40 Tb/s; processing a new batch of input data every 25 ns, each consisting of about 15,000 precise position measurements and rough transverse momentum measurements of particles ("stubs''); performing the pattern recognition on these stubs to find the trajectories; and producing the list of trajectory parameters within 4 $μ\,$s. This paper describes a proposed solution to this problem, specifically, it presents a novel approach to pattern recognition and charged particle trajectory reconstruction using an all-FPGA solution. The results of an end-to-end demonstrator system, based on Xilinx Virtex-7 FPGAs, that meets timing and performance requirements are presented along with a further improved, optimized version of the algorithm together with its corresponding expected performance.
△ Less
Submitted 6 July, 2020; v1 submitted 22 October, 2019;
originally announced October 2019.
-
A High-performance Track Fitter for Use in Ultra-fast Electronics
Authors:
E. Clement,
M. De Mattia,
S. Dutta,
R. Eusebi,
K. Hahn,
Z. Hu,
S. Jindariani,
J. Konigsberg,
T. Liu,
J. Low,
R. Patel,
D. Rathjens,
L. Ristori,
L. Skinnari,
M. Trovato,
K. A. Ulmer,
S. Viret
Abstract:
This article describes a new charged-particle track fitting algorithm designed for use in high-speed electronics applications such as hardware-based triggers in high-energy physics experiments. Following a novel technique designed for fast electronics, the positions of the hits on the detector are transformed before being passed to a linearized track parameter fit. This transformation results in f…
▽ More
This article describes a new charged-particle track fitting algorithm designed for use in high-speed electronics applications such as hardware-based triggers in high-energy physics experiments. Following a novel technique designed for fast electronics, the positions of the hits on the detector are transformed before being passed to a linearized track parameter fit. This transformation results in fitted track parameters with a very linear dependence on the hit positions. The approach is demonstrated in a representative detector geometry based on the CMS detector at the Large Hadron Collider. The fit is implemented in FPGA chips and optimized for track fitting throughput and obtains excellent track parameter performance. Such an algorithm is potentially useful in any high-speed track-fitting application.
△ Less
Submitted 5 September, 2018;
originally announced September 2018.
-
FPGA-Based Tracklet Approach to Level-1 Track Finding at CMS for the HL-LHC
Authors:
Edward Bartz,
Jorge Chaves,
Yuri Gershtein,
Eva Halkiadakis,
Michael Hildreth,
Savvas Kyriacou,
Kevin Lannon,
Anthony Lefeld,
Anders Ryd,
Louise Skinnari,
Robert Stone,
Charles Strohman,
Zhengcheng Tao,
Brian Winer,
Peter Wittich,
Margaret Zientek
Abstract:
During the High Luminosity LHC, the CMS detector will need charged particle tracking at the hardware trigger level to maintain a manageable trigger rate and achieve its physics goals. The tracklet approach is a track-finding algorithm based on a road-search algorithm that has been implemented on commercially available FPGA technology. The tracklet algorithm has achieved high performance in track-f…
▽ More
During the High Luminosity LHC, the CMS detector will need charged particle tracking at the hardware trigger level to maintain a manageable trigger rate and achieve its physics goals. The tracklet approach is a track-finding algorithm based on a road-search algorithm that has been implemented on commercially available FPGA technology. The tracklet algorithm has achieved high performance in track-finding and completes tracking within 3.4 $μ$s on a Xilinx Virtex-7 FPGA. An overview of the algorithm and its implementation on an FPGA is given, results are shown from a demonstrator test stand and system performance studies are presented.
△ Less
Submitted 28 June, 2017;
originally announced June 2017.
-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Observation of the rare $B^0_s\toμ^+μ^-$ decay from the combined analysis of CMS and LHCb data
Authors:
The CMS,
LHCb Collaborations,
:,
V. Khachatryan,
A. M. Sirunyan,
A. Tumasyan,
W. Adam,
T. Bergauer,
M. Dragicevic,
J. Erö,
M. Friedl,
R. Frühwirth,
V. M. Ghete,
C. Hartl,
N. Hörmann,
J. Hrubec,
M. Jeitler,
W. Kiesenhofer,
V. Knünz,
M. Krammer,
I. Krätschmer,
D. Liko,
I. Mikulec,
D. Rabady,
B. Rahbaran
, et al. (2807 additional authors not shown)
Abstract:
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six sta…
▽ More
A joint measurement is presented of the branching fractions $B^0_s\toμ^+μ^-$ and $B^0\toμ^+μ^-$ in proton-proton collisions at the LHC by the CMS and LHCb experiments. The data samples were collected in 2011 at a centre-of-mass energy of 7 TeV, and in 2012 at 8 TeV. The combined analysis produces the first observation of the $B^0_s\toμ^+μ^-$ decay, with a statistical significance exceeding six standard deviations, and the best measurement of its branching fraction so far. Furthermore, evidence for the $B^0\toμ^+μ^-$ decay is obtained with a statistical significance of three standard deviations. The branching fraction measurements are statistically compatible with SM predictions and impose stringent constraints on several theories beyond the SM.
△ Less
Submitted 17 August, 2015; v1 submitted 17 November, 2014;
originally announced November 2014.