-
Measurement of Spin-Polarized Photoemission from Wurtzite and Zinc-Blende Gallium Nitride Photocathodes
Authors:
S. J. Levenson,
M. B. Andorf,
B. D. Dickensheets,
I. V. Bazarov,
A. Galdi,
J. Encomendero,
V. V. Protasenko,
D. Jena,
H. G. Xing,
J. M. Maxson
Abstract:
Spin-polarized photoemission from wurtzite and zinc-blende gallium nitride (GaN) photocathodes has been observed and measured for the first time. The p-doped GaN photocathodes were epitaxially grown and activated to negative electron affinity (NEA) with a cesium monolayer deposited on their surfaces. A field-retarding Mott polarimeter was used to measure the spin-polarization of electrons photoemi…
▽ More
Spin-polarized photoemission from wurtzite and zinc-blende gallium nitride (GaN) photocathodes has been observed and measured for the first time. The p-doped GaN photocathodes were epitaxially grown and activated to negative electron affinity (NEA) with a cesium monolayer deposited on their surfaces. A field-retarding Mott polarimeter was used to measure the spin-polarization of electrons photoemitted from the top of the valence band. A spectral scan with a tunable optical parametric amplifier (OPA) constructed to provide low-bandwidth light revealed peak spin polarizations of 17% and 29% in the wurtzite and zinc-blende photocathodes, respectively. Zinc-blende GaN results are analyzed with a spin-polarization model accounting for experimental parameters used in the measurements, while possible mechanisms influencing the obtained spin polarization values of wurtzite GaN are discussed.
△ Less
Submitted 7 May, 2024;
originally announced May 2024.
-
Four-Dimensional Emittance Measurements of Ultrafast Electron Diffraction Optics Corrected Up to Sextupole Order
Authors:
M. Gordon,
W. H. Li,
M. B. Andorf,
A. C. Bartnik,
C. J. R. Duncan,
M. Kaemingk,
C. A. Pennington,
I. V. Bazarov,
Y. -K. Kim,
J. M. Maxson
Abstract:
Ultrafast electron diffraction (UED) is a technique in which short-pulse electron beams can probe the femtosecond-scale evolution of atomic structure in matter driven far from equilibrium. As an accelerator physics challenge, UED imposes stringent constraints on the brightness of the probe electron beam. The low normalized emittance employed in UED, often at the 10 nm scale and below, is particula…
▽ More
Ultrafast electron diffraction (UED) is a technique in which short-pulse electron beams can probe the femtosecond-scale evolution of atomic structure in matter driven far from equilibrium. As an accelerator physics challenge, UED imposes stringent constraints on the brightness of the probe electron beam. The low normalized emittance employed in UED, often at the 10 nm scale and below, is particularly sensitive to both applied field aberrations and space charge effects. The role of aberrations is increasingly important in small probe systems that often feature multiple orders of magnitude variations in beam size during transport. In this work, we report the correction of normal quadrupole, skew quadrupole, and sextupole aberrations via dedicated corrector elements in an ultrafast electron micro-diffraction beamline. To do this, we generate precise 4-dimensional phase space maps of rf-compressed electron beams, and find excellent agreement with aberration-free space charge simulations. Finally, we discuss the role a probe-forming aperture can play in improving the brightness of bunches with appreciable space charge effects.
△ Less
Submitted 27 July, 2022;
originally announced July 2022.
-
Multi-scale time-resolved electron diffraction: A case study in moiré materials
Authors:
C. J. R. Duncan,
M. Kaemingk,
W. H. Li,
M. B. Andorf,
A. C. Bartnik,
A. Galdi,
M. Gordon,
C. A. Pennington,
I. V. Bazarov,
H. J. Zeng,
F. Liu,
D. Luo,
A. Sood,
A. M. Lindenberg,
M. W. Tate,
D. A. Muller,
J. Thom-Levy,
S. M. Gruner,
J. M. Maxson
Abstract:
Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We dep…
▽ More
Ultrafast-optical-pump -- structural-probe measurements, including ultrafast electron and x-ray scattering, provide direct experimental access to the fundamental timescales of atomic motion, and are thus foundational techniques for studying matter out of equilibrium. High-performance detectors are needed in scattering experiments to obtain maximum scientific value from every probe particle. We deploy a hybrid pixel array direct electron detector to perform ultrafast electron diffraction experiments on a WSe$_2$/MoSe$_2$ 2D heterobilayer, resolving the weak features of diffuse scattering and moiré superlattice structure without saturating the zero order peak. Enabled by the detector's high frame rate, we show that a chopping technique provides diffraction difference images with signal-to-noise at the shot noise limit. Finally, we demonstrate that a fast detector frame rate coupled with a high repetition rate probe can provide continuous time resolution from femtoseconds to seconds, enabling us to perform a scanning ultrafast electron diffraction experiment that maps thermal transport in WSe$_2$/MoSe$_2$ and resolves distinct diffusion mechanisms in space and time.
△ Less
Submitted 27 July, 2023; v1 submitted 16 June, 2022;
originally announced June 2022.
-
Operation of Cs-Sb-O activated GaAs in a high voltage DC electron gun at high average current
Authors:
Jai Kwan Bae,
Matthew Andorf,
Adam Bartnik,
Alice Galdi,
Luca Cultrera,
Jared Maxson,
Ivan Bazarov
Abstract:
Negative Electron Affinity (NEA) activated GaAs photocathodes are the most popular option for generating a high current (> 1 mA) spin-polarized electron beam. Despite its popularity, a short operational lifetime is the main drawback of this material. Recent works have shown that the lifetime can be improved by using a robust Cs-Sb-O NEA layer with minimal adverse effects. In this work, we operate…
▽ More
Negative Electron Affinity (NEA) activated GaAs photocathodes are the most popular option for generating a high current (> 1 mA) spin-polarized electron beam. Despite its popularity, a short operational lifetime is the main drawback of this material. Recent works have shown that the lifetime can be improved by using a robust Cs-Sb-O NEA layer with minimal adverse effects. In this work, we operate GaAs photocathodes with this new activation method in a high voltage environment to extract a high current. We observed spectral dependence on the lifetime improvement. In particular, we saw a 45% increase in the lifetime at 780 nm for Cs-Sb-O activated GaAs compared to Cs-O activated GaAs.
△ Less
Submitted 26 May, 2022;
originally announced May 2022.
-
A kiloelectron-volt ultrafast electron micro-diffraction apparatus using low emittance semiconductor photocathodes
Authors:
W. H. Li,
C. J. R. Duncan,
M. B. Andorf,
A. C. Bartnik,
E. Bianco,
L. Cultrera,
A. Galdi,
M. Gordon,
M. Kaemingk,
C. A. Pennington,
L. F. Kourkoutis,
I. V. Bazarov,
J. M. Maxson
Abstract:
We report the design and performance of a time-resolved electron diffraction apparatus capable of producing intense bunches with simultaneously single digit micron probe size, long coherence length, and $200$ fs rms time resolution. We measure the 5d (peak) beam brightness at the sample location in micro-diffraction mode to be $7 \times 10^{13} \ \mathrm{A}/\text{m}^2\text{-rad}^2$. To generate hi…
▽ More
We report the design and performance of a time-resolved electron diffraction apparatus capable of producing intense bunches with simultaneously single digit micron probe size, long coherence length, and $200$ fs rms time resolution. We measure the 5d (peak) beam brightness at the sample location in micro-diffraction mode to be $7 \times 10^{13} \ \mathrm{A}/\text{m}^2\text{-rad}^2$. To generate high brightness electron bunches, the system employs high efficiency, low emittance semiconductor photocathodes driven with a wavelength near the photoemission threshold at a repetition rate up to 250 kHz. We characterize spatial, temporal, and reciprocal space resolution of the apparatus. We perform proof-of-principle measurements of ultrafast heating in single crystal Au samples and compare experimental results with simulations that account for the effects of multiple-scattering.
△ Less
Submitted 2 February, 2022; v1 submitted 15 November, 2021;
originally announced November 2021.
-
Simulation of the transit-time optical stochastic cooling process in the Cornell Electron Storage Ring
Authors:
S. T. Wang,
M. B. Andorf,
I. V. Bazarov,
W. F. Bergan,
V. Khachatryan,
J. M. Maxson,
D. L. Rubin
Abstract:
In preparation for a demonstration of optical stochastic cooling in the Cornell Electron Storage Ring (CESR) we have developed a particle tracking simulation to study the relevant beam dynamics. Optical radiation emitted in the pickup undulator gives a momentum kick to that same particle in the kicker undulator. The optics of the electron bypass from pickup to kicker couples betatron amplitude and…
▽ More
In preparation for a demonstration of optical stochastic cooling in the Cornell Electron Storage Ring (CESR) we have developed a particle tracking simulation to study the relevant beam dynamics. Optical radiation emitted in the pickup undulator gives a momentum kick to that same particle in the kicker undulator. The optics of the electron bypass from pickup to kicker couples betatron amplitude and momentum offset to path length so that the momentum kick reduces emittance and momentum spread. Nearby electrons contribute an incoherent noise. Layout of the bypass line is presented that accommodates optics with a range of transverse and longitudinal cooling parameters. The simulation is used to determine cooling rates and their dependence on bunch and lattice parameters for bypass optics with distinct emittance and momentum acceptance.
△ Less
Submitted 24 June, 2021; v1 submitted 30 March, 2021;
originally announced March 2021.
-
Conceptual Design Report: Optical Stochastic Cooling at IOTA
Authors:
V. Lebedev,
J. Jarvis,
H. Piekarz,
A. Romanov,
J. Ruan,
M. Andorf
Abstract:
The paper presents a journal version of the Design Report on the Optical Stochastic Cooling experiment to be carried out at IOTA ring in Fermilab later this year. It discusses the theory which experiment is based on, beam parameters, major requirements to the storage ring systems and technical details of the experiment implementation.
The paper presents a journal version of the Design Report on the Optical Stochastic Cooling experiment to be carried out at IOTA ring in Fermilab later this year. It discusses the theory which experiment is based on, beam parameters, major requirements to the storage ring systems and technical details of the experiment implementation.
△ Less
Submitted 4 May, 2021; v1 submitted 17 December, 2020;
originally announced December 2020.
-
Optical Stochastic Cooling with an Arc-Bypass in CESR
Authors:
M. B. Andorf,
W. F. Bergan,
I. V. Bazarov,
J. M. Maxson,
V. Khachatryan,
D. L. Rubin,
S. T. Wang
Abstract:
A proposed experiment to demonstrate Optical Stochastic Cooling (OSC) in the Cornell Electron Storage Ring (CESR) based on an arc-bypass design is presented. This arc-bypass provides significantly longer optical delay than the dog-leg style chicane, opening up the possibility of a multi-pass or staged optical amplifier that can achieve the gains required for effective cooling of hadron or heavy-io…
▽ More
A proposed experiment to demonstrate Optical Stochastic Cooling (OSC) in the Cornell Electron Storage Ring (CESR) based on an arc-bypass design is presented. This arc-bypass provides significantly longer optical delay than the dog-leg style chicane, opening up the possibility of a multi-pass or staged optical amplifier that can achieve the gains required for effective cooling of hadron or heavy-ions. Beyond introducing the arc-bypass, in this paper we study the stability requirements for the dipoles comprising it and investigate the use of an optical feedback system to relax the dipole and light-path stability tolerances.
△ Less
Submitted 5 October, 2020; v1 submitted 26 July, 2020;
originally announced July 2020.
-
A Single-pass Cr:ZnSe Amplifier for Broadband Infared Undulator Radiation
Authors:
M. B. Andorf,
V. A. Lebedev,
P. Piot
Abstract:
An amplifier based on a highly-doped Chromium Zinc-Selenide (Cr:ZnSe) crystal is proposed to increase the pulse energy emitted by an electron bunch after it passes through an undulator magnet. The primary motivation is a possible use of the amplified undulator radiation emitted by a beam circulating in a particle accelerator storage ring to increase the particle beam's phase-space density---a tech…
▽ More
An amplifier based on a highly-doped Chromium Zinc-Selenide (Cr:ZnSe) crystal is proposed to increase the pulse energy emitted by an electron bunch after it passes through an undulator magnet. The primary motivation is a possible use of the amplified undulator radiation emitted by a beam circulating in a particle accelerator storage ring to increase the particle beam's phase-space density---a technique dubbed Optical Stochastic Cooling (OSC). This paper uses a simple four energy level model to estimate the single-pass gain of Cr:ZnSe and presents numerical calculations combined with wave-optics simulations of undulator radiation to estimate the expected properties of the amplified undulator wave-packet.
△ Less
Submitted 12 July, 2020; v1 submitted 27 April, 2020;
originally announced April 2020.
-
The Role of Low Intrinsic Emittance in Modern Photoinjector Brightness
Authors:
Christopher M. Pierce,
Matthew B. Andorf,
Edmond Lu,
Matthew Gordon,
Young-Kee Kim,
Colwyn Gulliford,
Ivan V. Bazarov,
Jared M. Maxson,
Nora P. Norvell,
Bruce M. Dunham,
Tor O. Raubenheimer
Abstract:
Reducing the intrinsic emittance of photocathodes is one of the most promising routes to improving the brightness of electron sources. However, when emittance growth occurs during beam transport (for example, due to space-charge), it is possible that this emittance growth overwhelms the contribution of the photocathode and, thus, in this case source emittance improvements are not beneficial. Using…
▽ More
Reducing the intrinsic emittance of photocathodes is one of the most promising routes to improving the brightness of electron sources. However, when emittance growth occurs during beam transport (for example, due to space-charge), it is possible that this emittance growth overwhelms the contribution of the photocathode and, thus, in this case source emittance improvements are not beneficial. Using multi-objective genetic optimization, we investigate the role intrinsic emittance plays in determining the final emittance of several space-charge dominated photoinjectors, including those for high repetition rate free electron lasers and ultrafast electron diffraction. We introduce a new metric to predict the scale of photocathode emittance improvements that remain beneficial and explain how additional tuning is required to take full advantage of new photocathode technologies. Additionally, we determine the scale of emittance growth due to point-to-point Coulomb interactions with a fast tree-based space-charge solver. Our results show that in the realistic high brightness photoinjector applications under study, the reduction of thermal emittance to values as low as 50 pm/um (1 meV MTE) remains a viable option for the improvement of beam brightness.
△ Less
Submitted 16 April, 2020;
originally announced April 2020.
-
Optical Stochastic Cooling Experiment At The Fermilab IOTA Ring
Authors:
J. D. Jarvis,
V. Lebedev,
H. Piekarz,
A. L. Romanov,
J. Ruan,
M. B. Andorf,
P. Piot
Abstract:
Beam cooling enables an increase of peak and average luminosities and significantly expands the discovery potential of colliders; therefore, it is an indispensable component of any modern design. Optical Stochastic Cooling (OSC) is a high-bandwidth, beam-cooling technique that will advance the present state-of-the-art, stochastic cooling rate by more than three orders of magnitude. It is an enabli…
▽ More
Beam cooling enables an increase of peak and average luminosities and significantly expands the discovery potential of colliders; therefore, it is an indispensable component of any modern design. Optical Stochastic Cooling (OSC) is a high-bandwidth, beam-cooling technique that will advance the present state-of-the-art, stochastic cooling rate by more than three orders of magnitude. It is an enabling technology for next-generation, discovery-science machines at the energy and intensity frontiers including hadron and electron-ion colliders. This paper presents the status of our experimental effort to demonstrate OSC at the Integrable Optics Test Accelerator (IOTA) ring, a testbed for advanced beam-physics concepts and technologies that is currently being commissioned at Fermilab. Our recent efforts are centered on the development of an integrated design that is prepared for final engineering and fabrication. The paper also presents a comparison of theoretical calculations and numerical simulations of the pickup-undulator radiation and its interaction with electrons in the kicker-undulator.
△ Less
Submitted 23 August, 2018;
originally announced August 2018.
-
Computation and Numerical Simulation of Focused Undulator Radiation for Optical Stochastic Cooling
Authors:
Matthew Andorf,
Valeri Lebedev,
Jonathan Jarvis,
Philippe Piot
Abstract:
Optical stochastic cooling (OSC) is a promising technique for the cooling of dense particle beams. Its operation at optical frequencies enables obtaining a much larger bandwidth compared to the wellknown microwave-based stochastic cooling. In the OSC undulator radiation generated by a particle in an upstream \pickup" undulator is amplified and focused at the location of a downstream "kicker" undul…
▽ More
Optical stochastic cooling (OSC) is a promising technique for the cooling of dense particle beams. Its operation at optical frequencies enables obtaining a much larger bandwidth compared to the wellknown microwave-based stochastic cooling. In the OSC undulator radiation generated by a particle in an upstream \pickup" undulator is amplified and focused at the location of a downstream "kicker" undulator. Inside the kicker, a particle interacts with its own radiation field from the pickup. The resulting interaction produces a longitudinal kick with its value depending on the particles momentum which, when correctly phased, yields to longitudinal cooling. The horizontal cooling is achieved by introducing a coupling between longitudinal and horizontal degrees of freedom. Vertical cooling is achieved by coupling between horizontal and vertical motions in the ring. In this paper, we present formulae for computation of the corrective kick and validate them against numerical simulations performed using a wave-optics computer program.
△ Less
Submitted 13 June, 2018;
originally announced June 2018.
-
Wave-Optics Modeling of the Optical-Transport Line for Passive Optical Stochastic Cooling
Authors:
M. B. Andorf,
V. A. Lebedev,
P. Piot,
J. Ruan
Abstract:
Optical stochastic cooling (OSC) is expected to enable fast cooling of dense particle beams. Transition from microwave to optical frequencies enables an achievement of stochastic cooling rates which are orders of magnitude higher than ones achievable with the classical microwave based stochastic cooling systems. A subsytem critical to the OSC scheme is the focusing optics used to image radiation f…
▽ More
Optical stochastic cooling (OSC) is expected to enable fast cooling of dense particle beams. Transition from microwave to optical frequencies enables an achievement of stochastic cooling rates which are orders of magnitude higher than ones achievable with the classical microwave based stochastic cooling systems. A subsytem critical to the OSC scheme is the focusing optics used to image radiation from the upstream "pickup" undulator to the downstream "kicker" undulator. In this paper, we present simulation results using wave-optics calculation carried out with the {\sc Synchrotron Radiation Workshop} (SRW). Our simulations are performed in support to a proof-of-principle experiment planned at the Integrable Optics Test Accelerator (IOTA) at Fermilab. The calculations provide an estimate of the energy kick received by a 100-MeV electron as it propagates in the kicker undulator and interacts with the electromagnetic pulse it radiated at an earlier time while traveling through the pickup undulator.
△ Less
Submitted 21 November, 2017;
originally announced November 2017.