-
Snowmass'21 Accelerator Frontier Report
Authors:
S. Gourlay,
T. Raubenheimer,
V. Shiltsev,
G. Arduini,
R. Assmann,
C. Barbier,
M. Bai,
S. Belomestnykh,
S. Bermudez,
P. Bhat,
A. Faus-Golfe,
J. Galambos,
C. Geddes,
G. Hoffstaetter,
M. Hogan,
Z. Huang,
M. Lamont,
D. Li,
S. Lund,
R. Milner,
P. Musumeci,
E. Nanni,
M. Palmer,
N. Pastrone,
F. Pellemoine
, et al. (13 additional authors not shown)
Abstract:
In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these…
▽ More
In 2020-2022, extensive discussions and deliberations have taken place in corresponding topical working groups of the Snowmass Accelerator Frontier (AF) and in numerous joint meetings with other Frontiers, Snowmass-wide meetings, a series of Colloquium-style Agoras, cross-Frontier Forums on muon and electron-positron colliders and the collider Implementation Task Force (ITF). The outcomes of these activities are summarized in this Accelerator Frontier report.
△ Less
Submitted 17 November, 2022; v1 submitted 28 September, 2022;
originally announced September 2022.
-
Snowmass2021 Topical Group Report from AF07: Targets and Sources
Authors:
Charlotte Barbier,
Frederique Pellemoine,
Yine Sun
Abstract:
For the next multi-megawatt accelerator generation, targets and other beam-intercepting components will face even more severe challenges due to the higher power densities, higher energy, and higher radiation. A comprehensive research and development program must be implemented to address the challenges. International collaborations such as RaDIATE or High Power Targetry Workshop should be leverage…
▽ More
For the next multi-megawatt accelerator generation, targets and other beam-intercepting components will face even more severe challenges due to the higher power densities, higher energy, and higher radiation. A comprehensive research and development program must be implemented to address the challenges. International collaborations such as RaDIATE or High Power Targetry Workshop should be leveraged and expanded to accelerate knowledge gain and avoid duplicated efforts. The next generation of high power targets will need novel designs allowing better high heat flux cooling methods, novel materials, advanced simulations, and better instrumentation. Four main R&D tracks were identified and discussed for targets. For electron sources, current state of art and challenges we are facing for key components such as cathodes, guns and injector design for sources R&D are presented for highly polarized electrons and unpolarized high current high brightness beams. For ion sources such as electron cyclotron resonance ion source (ECRIS), laser ion source (LIS), charge breeders, status of development are reviewed, and areas require investment for future R&D are discussed separately. Facilities critical for various source development are recommended.
△ Less
Submitted 29 August, 2022;
originally announced August 2022.
-
Novel Materials and Concepts for Next-Generation High Power Target Applications
Authors:
Kavin Ammigan,
Sujit Bidhar,
Frederique Pellemoine,
Vitaly Pronskikh,
David Pushka,
Katsuya Yonehara,
Robert Zwaska,
Adrien Couet,
Michael Moorehead,
Taku Ishida,
Shunsuke Makimura,
Christopher Densham,
Michael Fitton,
Eric Harvey-Fishenden,
Tristan Davenne,
David Jenkins,
Peter Loveridge,
Joe O'Dell,
Chris Rogers,
Dan Wilcox,
Marco Calviani,
Simone Gilardoni,
Francois-Xavier Nuiry,
Antonio Perillo-Marcone,
Nathan Bultman
, et al. (14 additional authors not shown)
Abstract:
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materia…
▽ More
Novel beam-intercepting materials and targetry concepts are essential to improve the performance, reliability and operation lifetimes of next generation multi-megawatt (multi-MW) accelerator target facilities. The beam-intercepting materials and components must sustain an order-of-magnitude increase in particle beam intensities and are beyond the current state-of-the-art. With conventional materials already limiting the scope of experiments, it is crucial to investigate novel target materials, technologies and concepts that will satisfy the requirements and maximize the physics benefits of future energy and intensity frontier experiments. This paper provides an overview of the related targetry R&D required over the next 10 years to support and enable future high-power accelerator target facilities.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Irradiation Facilities and Irradiation Methods for High Power Target
Authors:
F. Pellemoine,
C. Barbier,
Y. Sun,
K. Ammigan,
S. Bidhar,
B. Zwaska,
D. McClintock,
S. Taller,
D. Winder,
C. S. Cutler,
D. Kim,
Y. Chiu,
M. Freer,
C. Wheldon,
A. Gottberg,
F. Boix Pamies,
M. Calviani,
N. Charitonidis,
R. Garcia Alia,
F. Ravotti,
S. Danzeca,
A. P. Bernardes,
N. Moncoffre,
S. Meigo,
T. Ishida
, et al. (16 additional authors not shown)
Abstract:
High Power Target systems are key elements in future neutrino and other rare particle production in accelerators. These systems transform an intense source of protons into secondary particles of interest to enable new scientific discoveries. As beam intensity and energies increase, target systems face significant challenges. Radiation damages and thermal shocks in target materials were identified…
▽ More
High Power Target systems are key elements in future neutrino and other rare particle production in accelerators. These systems transform an intense source of protons into secondary particles of interest to enable new scientific discoveries. As beam intensity and energies increase, target systems face significant challenges. Radiation damages and thermal shocks in target materials were identified as the leading cross-cutting challenges of high-power target facilities. Target material R&D to address these challenges are essential to enable and ensure reliable operation of future-generation accelerators. Irradiation facilities and alternative methods are critical to provide a full support of material R&D and better address these critical challenges.
△ Less
Submitted 14 December, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Modeling Needs for High Power Target
Authors:
Charlotte Barbier,
Sujit Bidhar,
Marco Calviani,
Jeff Dooling,
Jian Gao,
Aaron Jacques,
Wei Lu,
Roberto Li Voti,
Frederique Pellemoine,
Justin Mach,
David Senor,
Fernando Sordo,
Izabela Szlufarska,
Joseph Tipton,
Dan Wilcox,
Drew Winder
Abstract:
The next generation of high power targets will use more complex geometries, novel materials, and new concepts (like flowing granular materials); however, the current numerical approaches will not be sufficient to converge towards a reliable target design that satisfies the physical requirements. We will discuss what can be improved in the next 10 years in target modeling to support high power (MW…
▽ More
The next generation of high power targets will use more complex geometries, novel materials, and new concepts (like flowing granular materials); however, the current numerical approaches will not be sufficient to converge towards a reliable target design that satisfies the physical requirements. We will discuss what can be improved in the next 10 years in target modeling to support high power (MW class) targets.
△ Less
Submitted 9 March, 2022;
originally announced March 2022.
-
Large Drag Reduction over Superhydrophobic Riblets
Authors:
Charlotte Barbier,
Elliot Jenner,
Brian D'Urso
Abstract:
Riblets and superhydrophobic surfaces are two demonstrated passive drag reduction techniques. We describe a method to fabricate surfaces that combine both of these techniques in order to increase drag reduction properties. Samples have been tested with a cone-and-plate rheometer system, and have demonstrated significant drag reduction even in the transitional-turbulent regime. Direct Numerical Sim…
▽ More
Riblets and superhydrophobic surfaces are two demonstrated passive drag reduction techniques. We describe a method to fabricate surfaces that combine both of these techniques in order to increase drag reduction properties. Samples have been tested with a cone-and-plate rheometer system, and have demonstrated significant drag reduction even in the transitional-turbulent regime. Direct Numerical Simulations have been performed in order to estimate the equivalent slip length at higher rotational speed. The sample with 100~$μ$m deep grooves has been performing very well, showing drag reduction varying from 15 to 20 $\%$ over the whole range of flow conditions tested, and its slip length was estimated to be over 100 $μ$m.
△ Less
Submitted 2 June, 2014;
originally announced June 2014.
