-
Experimental observation of higher-order anapoles in individual silicon disks under in-plane illumination
Authors:
Evelyn Diaz-Escobar,
Angela I. Barreda,
Amadeu Griol,
Alejandro Martinez
Abstract:
Anapole states - characterized by a strong suppression of far-field scattering - naturally arise in high-index nanoparticles as a result of the interference between certain multipolar moments. Recently, the first-order electric anapole, resulting from the interference between the electric and toroidal dipoles, was characterized under in-plane illumination as required in on-chip photonics. Here, we…
▽ More
Anapole states - characterized by a strong suppression of far-field scattering - naturally arise in high-index nanoparticles as a result of the interference between certain multipolar moments. Recently, the first-order electric anapole, resulting from the interference between the electric and toroidal dipoles, was characterized under in-plane illumination as required in on-chip photonics. Here, we go a step further and report on the observation of higher-order (magnetic and second-order electric) anapole states in individual silicon disks under in-plane illumination. To do so, we increase the disk dimensions (radius and thickness) so that such anapoles occur at telecom wavelengths. Experiments show dips in the far-field scattering perpendicular to the disk plane at the expected wavelengths and the selected polarizations, which we interpret as a signature of high-order anapoles. Some differences between normal and in-plane excitation are discussed, in particular the non-cancellation of the sum of the Cartesian electric and toroidal moments for in-plane incidence. Our results pave the way towards the use of different anapole states in photonic integrated circuits, either on silicon or other high-index dielectric materials.
△ Less
Submitted 13 July, 2022;
originally announced July 2022.
-
Continuous-Wave Frequency Upconversion with a Molecular Optomechanical Nanocavity
Authors:
Wen Chen,
Philippe Roelli,
Huatian Hu,
Sachin Verlekar,
Sakthi Priya Amirtharaj,
Angela I. Barreda,
Tobias J. Kippenberg,
Miroslavna Kovylina,
Ewold Verhagen,
Alejandro Martínez,
Christophe Galland
Abstract:
Frequency upconversion is a cornerstone of electromagnetic signal processing, analysis and detection. It is used to transfer energy and information from one frequency domain to another where transmission, modulation or detection is technically easier or more efficient. Optomechanical transduction is emerging as a flexible approach to coherent frequency upconversion; it has been successfully demons…
▽ More
Frequency upconversion is a cornerstone of electromagnetic signal processing, analysis and detection. It is used to transfer energy and information from one frequency domain to another where transmission, modulation or detection is technically easier or more efficient. Optomechanical transduction is emerging as a flexible approach to coherent frequency upconversion; it has been successfully demonstrated for conversion from radio- and microwaves (kHz to GHz) to optical fields. Nevertheless, optomechanical transduction of multi-THz and mid-infrared signals remains an open challenge. Here, we utilize molecular cavity optomechanics to demonstrate upconversion of sub-microwatt continuous-wave signals at $\sim$32~THz into the visible domain at ambient conditions. The device consists in a plasmonic nanocavity hosting a small number of molecules. The incoming field resonantly drives a collective molecular vibration, which imprints an optomechanical modulation on a visible pump laser and results in Stokes and anti-Stokes upconverted Raman sidebands with sub-natural linewidth, indicating a coherent process. The nanocavity offers 13 orders of magnitude enhancement of upconversion efficiency per molecule compared to free space, with a measured phonon-to-photon internal conversion efficiency larger than $10^{-4}$ per milliwatt of pump power. Our results establish a flexible paradigm for optomechanical frequency conversion using molecular oscillators coupled to plasmonic nanocavities, whose vibrational and electromagnetic properties can be tailored at will using chemical engineering and nanofabrication.
△ Less
Submitted 7 July, 2021;
originally announced July 2021.
-
Hybrid Photonic-Plasmonic Cavities based on the Nanoparticle-on-a-Mirror Configuration
Authors:
Angela I. Barreda,
Mario Zapata-Herrera,
Isabelle Palstra,
Laura Mercadé,
Javier Aizpurua,
A. Femius Koenderink,
Alejandro Martínez
Abstract:
Hybrid photonic-plasmonic cavities have emerged as a new platform to increase light-matter interaction capable to enhance the Purcell factor in a singular way not attainable with either photonic or plasmonic cavities separately. In the hybrid cavities proposed so far, mainly consisting of metallic bow-tie antennas, the plasmonic gap sizes defined by lithography in a repeatable way are limited to m…
▽ More
Hybrid photonic-plasmonic cavities have emerged as a new platform to increase light-matter interaction capable to enhance the Purcell factor in a singular way not attainable with either photonic or plasmonic cavities separately. In the hybrid cavities proposed so far, mainly consisting of metallic bow-tie antennas, the plasmonic gap sizes defined by lithography in a repeatable way are limited to minimum values \approx 10 nm. Nanoparticle-on-a-mirror (NPoM) cavities are far superior to achieve the smallest possible mode volumes, as gaps smaller than 1 nm can be created. Here, we design a hybrid cavity that combines a NPoM plasmonic cavity and a dielectric-nanobeam photonic crystal cavity operating at transverse-magnetic (TM) polarization. The metallic nanoparticle can be placed very close (< 1 nm) to the upper surface of the dielectric cavity, which acts as a low-reflectivity mirror. We demonstrate through numerical calculations that this kind of hybrid plasmonic-photonic cavity architecture exhibits quality factors, Q, above 10^{3} and normalized mode volumes, V , down to 10^{\num{-3}}, thus resulting in high Purcell factors (FP \approx 10^5), whilst being experimentally feasible with current technology. Our results suggest that hybrid cavities with sub-nm gaps should open new avenues for boosting light-matter interaction in nanophotonic systems.
△ Less
Submitted 3 June, 2021;
originally announced June 2021.
-
Optical inspection of manufactured nanohole arrays to bridge the lab-industry gap
Authors:
A. Franco,
D. Otaduy,
A. I. Barreda,
J. L. FernÁndez-Luna,
S. Merino,
F. GonzÁlez,
F. Moreno
Abstract:
Metallic nanohole arrays have shown their potential as sensing tools. Important research supported by sophisticated laboratory experiments have been recently carried out, that may help to develop practical devices to be implemented in the real life. To get this goal, the gap between industry and technology at the nanoscale level must be overcome. One of the major drawbacks is the quality inspectio…
▽ More
Metallic nanohole arrays have shown their potential as sensing tools. Important research supported by sophisticated laboratory experiments have been recently carried out, that may help to develop practical devices to be implemented in the real life. To get this goal, the gap between industry and technology at the nanoscale level must be overcome. One of the major drawbacks is the quality inspection of the manufactured nanostructured surfaces to ensure a reliable sensing. In this paper we introduce an optical method, based on the Extraordinary Optical Transmission phenomenon, for an inspection of such surfaces at industrial level. Unlike usual techniques like SEM, our method gives at the same time, a quick map of the surface homogeneity together with its local plasmonic performance. Our results show that this method is reproducible and reliable as to give a seal of identification and quality guarantee of the manufactured surface as basic element of a sensing device.
△ Less
Submitted 22 November, 2018;
originally announced November 2018.
-
Electromagnetic polarization controlled perfect switching effect with high refractive index dimers. the beam-splitter configuration
Authors:
Angela I. Barreda,
Hassan Saleh,
Amelie Litman,
Francisco Gonzalez,
Jean-Michel Geffrin,
Fernando Moreno
Abstract:
High Refractive Index (HRI) dielectric particles smaller than the wavelength, isolated or forming a designed ensemble are ideal candidates as new multifunctional elements for building optical devices. Their directionality effects are traditionally analyzed through forward and backward measurements, even if these directions are not suitable for practical purposes. Here we present unambiguous experi…
▽ More
High Refractive Index (HRI) dielectric particles smaller than the wavelength, isolated or forming a designed ensemble are ideal candidates as new multifunctional elements for building optical devices. Their directionality effects are traditionally analyzed through forward and backward measurements, even if these directions are not suitable for practical purposes. Here we present unambiguous experimental evidence in the microwave range that, for a dimer of HRI spherical particles, a perfect switching effect (perfect means off = null intensity) is observed out of those directions as a consequence of the mutual particle electric/magnetic interaction. The binary state depends on the excitation polarization (polarization switching). Its analysis is performed through the linear polarization degree of scattered radiation at a detection direction perpendicular to the incident direction: the beam-splitter configuration. The scaling property of Maxwell equations allows generalizing our results to other frequency range and dimension scales, for instance, the visible and the nanometric scale.
△ Less
Submitted 7 June, 2016;
originally announced June 2016.
