-
Fully printed flexible perovskite solar modules with improved energy alignment by tin oxide surface modification
Authors:
Lirong Dong,
Shudi Qiu,
Jose Garcia Cerrillo,
Michael Wagner,
Olga Kasian,
Sarmad Feroze,
Dongju Jang,
Chaohui Li,
Vincent M. Le Corre,
Kaicheng Zhang,
Heiko Peisert,
Felix U Kosasih,
Charline Arrive,
Tian Du,
Fu Yang,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge remains in the deficiency in controlling interfacial recombination losses of the functional layer, causing remarkable loss of power conversion efficiency (PCE) in ind…
▽ More
Fully printed flexible perovskite solar cells (f-PSCs) show great potential for the commercialization of perovskite photovoltaics owing to their compatibility with high-throughput roll-to-roll (R2R) production. However, the challenge remains in the deficiency in controlling interfacial recombination losses of the functional layer, causing remarkable loss of power conversion efficiency (PCE) in industrial production. Here, a fullerene-substituted alkylphosphonic acid dipole layer is introduced between the R2R-printed tin oxide electron transport layer and the perovskite active layer to reduce the energetic barrier and to suppress surface recombination at the buried interface. The resulting f-PSCs exhibit a PCE of 17.0% with negligible hysteresis, retain 95% of their initial PCE over 3000 bending cycles and achieve a T95 lifetime of 1200 h under 1 sun and 65 degreeC in nitrogen atmosphere. Moreover, the fully printed flexible perovskite solar mini-modules (f-PSMs) with a 20.25 cm2 aperture area achieve a PCE of 11.6%. The encapsulated f-PSMs retain 90% of their initial PCE after 500 h damp-heat testing at 65 degreeC and 85% relative humidity (ISOS-D3). This work marks an important progress toward the realization of efficient and stable flexible perovskite photovoltaics for commercialization.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Precise Control of Process Parameters for >23% Efficiency Perovskite Solar Cells in Ambient Air Using an Automated Device Acceleration Platform
Authors:
Jiyun Zhang,
Anastasia Barabash,
Tian Du,
Jianchang Wu,
Vincent M. Le Corre,
Yicheng Zhao,
Shudi Qiu,
Kaicheng Zhang,
Frederik Schmitt,
Zijian Peng,
Jingjing Tian,
Chaohui Li,
Chao Liu,
Thomas Heumueller,
Larry Lüer,
Jens A. Hauch,
Christoph J. Brabec
Abstract:
Achieving high-performance perovskite photovoltaics, especially in ambient air relies heavily on optimizing process parameters. However, traditional manual methods often struggle to effectively control the key variables. This inherent challenge requires a paradigm shift toward automated platforms capable of precise and reproducible experiments. Herein, we use a fully automated device acceleration…
▽ More
Achieving high-performance perovskite photovoltaics, especially in ambient air relies heavily on optimizing process parameters. However, traditional manual methods often struggle to effectively control the key variables. This inherent challenge requires a paradigm shift toward automated platforms capable of precise and reproducible experiments. Herein, we use a fully automated device acceleration platform (DAP) to optimize the process parameters for preparing full perovskite devices using a two-step method in ambient air. Eight process parameters that have the potential to significantly influence device performance are systematically optimized. Specifically, we delve into the impact of the dispense speed of organic ammonium halide, a parameter that is difficult to control manually, on both perovskite film and device performance. Through the targeted design of experiments, we reveal that the dispense speed significantly affects device performance primarily by adjusting the residual PbI2 content in the films. We find that moderate dispense speeds, e.g., 50 μl/s, contribute to top-performance devices. Conversely, too fast or too slow speeds result in devices with relatively poorer performance and lower reproducibility. The optimized parameter set enables us to establish a Standard Operation Procedure (SOP) for additive-free perovskite processing under ambient conditions, which yield devices with efficiencies surpassing 23%, satisfactory reproducibility, and state-of-the-art photo-thermal stability. This research underscores the importance of understanding the causality of process parameters in enhancing perovskite photovoltaic performance. Furthermore, our study highlights the pivotal role of automated platforms in discovering innovative workflows and accelerating the development of high-performing perovskite photovoltaic technologies.
△ Less
Submitted 29 March, 2024;
originally announced April 2024.
-
LNoS: Lithium Niobate on Silicon Spatial Light Modulator
Authors:
Sivan Trajtenberg-Mills,
Mohamed ElKabbash,
Cole J. Brabec,
Christopher L. Panuski,
Ian Christen,
Dirk Englund
Abstract:
Programmable spatiotemporal control of light is crucial for advancements in optical communications, imaging, and quantum technologies. Commercial spatial light modulators (SLMs) typically have megapixel-scale apertures but are limited to ~kHz operational speeds. Developing a device that controls a similar number of spatial modes at high speeds could potentially transform fields such as imaging thr…
▽ More
Programmable spatiotemporal control of light is crucial for advancements in optical communications, imaging, and quantum technologies. Commercial spatial light modulators (SLMs) typically have megapixel-scale apertures but are limited to ~kHz operational speeds. Developing a device that controls a similar number of spatial modes at high speeds could potentially transform fields such as imaging through scattering media, quantum computing with cold atoms and ions, and high-speed machine vision, but to date remains an open challenge. In this work we introduce and demonstrate a free-form, resonant electro-optic (EO) modulator with megapixel apertures using CMOS integration. The optical layer features a Lithium Niobate (LN) thin-film integrated with a photonic crystal (PhC), yielding a guided mode resonance (GMR) with a Q-factor>1000, a field overlap coefficient ~90% and a 1.6 GHz 3-dB modulation bandwidth (detector limited). To realize a free-form and scalable SLM, we fabricate the PhC via interference lithography and develop a procedure to bond the device to a megapixel CMOS backplane. We identify limitations in existing EO materials and CMOS backplanes that must be overcome to simultaneously achieve megapixel-scale, GHz-rate operation. The `LN on Silicon' (LNoS) architecture we present is a blueprint towards realizing such devices.
△ Less
Submitted 22 February, 2024;
originally announced February 2024.
-
All Inkjet-printed Organic Solar Cells on 3D Objects
Authors:
Marc Steinberger,
Andreas Distler,
Johannes Hörber,
Kai Cheong Tam,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Drop-on-demand inkjet printing is a promising and commercially relevant technology for producing organic electronic devices of arbitrary shape on a wide variety of different substrates. In this work we transfer the inkjet printing process of organic photovoltaic devices from 2D to 3D substrates, using a 5-axis robot system equipped with a multi nozzle inkjet printing unit. We present a ready-to-us…
▽ More
Drop-on-demand inkjet printing is a promising and commercially relevant technology for producing organic electronic devices of arbitrary shape on a wide variety of different substrates. In this work we transfer the inkjet printing process of organic photovoltaic devices from 2D to 3D substrates, using a 5-axis robot system equipped with a multi nozzle inkjet printing unit. We present a ready-to-use 3D printing system for industrial application, using a 5-axis motion system controlled by commercial 3D motion software, combined with a commonly used multi-nozzle inkjet print head controlled by the corresponding printing software. The very first time inkjet-printed solar cells on glass/ITO with power conversion efficiencies (PCE) of up to 7% are realized on a 3D object with surfaces tilted by angles of up to 60° against the horizontal direction. Undesired ink flow during deposition of the inkjet-printed layers was avoided by proper ink formulation. In order to be able to print organic (opto-)electronic devices also on substrates without sputtered indium tin oxide bottom electrode, the bottom electrode was inkjet-printed from silver nanoparticle (AgNP) ink, resulting in the first all inkjet-printed (i.e., including bottom electrode) solar cell on a 3D object ever with a record PCE of 2.5%. This work paves the way for functionalizing even complex objects, such as cars, mobile phones, or Internet of Things (IoT) applications with inkjet-printed (opto-)electronic devices.
△ Less
Submitted 22 January, 2024;
originally announced January 2024.
-
On the theoretical framework for meniscus-guided manufacturing of large-area OPV modules
Authors:
Fabian Gumpert,
Annika Janßen,
Robin Basu,
Christoph J. Brabec,
Hans-Joachim Egelhaaf,
Jan Lohbreier,
Andreas Distler
Abstract:
For the manufacturing of thin films of solution-processable organic semiconductors, e.g. for organic photovoltaics (OPV), meniscus guided-coating techniques are the method of choice for large-scale industrial applications. However, the process requires an in-depth understanding of the respective fluid dynamics to control the resulting film thickness. In this article, we derive an analytical expres…
▽ More
For the manufacturing of thin films of solution-processable organic semiconductors, e.g. for organic photovoltaics (OPV), meniscus guided-coating techniques are the method of choice for large-scale industrial applications. However, the process requires an in-depth understanding of the respective fluid dynamics to control the resulting film thickness. In this article, we derive an analytical expression to describe the layer thickness of coatings manufactured with a trapezoidal-shaped applicator as a function of various fluid and process parameters. The analytical calculations are compared with results from computational fluid dynamics (CFD) simulations and experimental data for an industrially relevant OPV active material system. The analytical calculations are compared with results from computational fluid dynamics (CFD) simulations and experimental data for an industrially relevant OPV active material system. The good agreement of all three approaches demonstrates the potential of the analytical and simulative methods to reduce time- and resource-consuming experiments to a minimum. Furthermore, our theoretical model can be used to enhance the homogeneity of large-area coatings by means of an acceleration profile of the applicator that can compensate the liquid loss during the coating process. The respective analytical expression is validated by simulated and experimentally obtained data for long-distance coatings. Finally, this approach is used to fabricate a large-area OPV module with new world record efficiency.
△ Less
Submitted 16 January, 2024;
originally announced January 2024.
-
Metal-Optic Nanophotonic Modulators in Standard CMOS Technology
Authors:
Mohamed ElKabbash,
Sivan Trajtenberg-Mills,
Isaac Harris,
Saumil Bandyopadhyay,
Mohamed I Ibrahim,
Archer Wang,
Xibi Chen,
Cole Brabec,
Hasan Z. Yildiz,
Ruonan Han,
Dirk Englund
Abstract:
Integrating nanophotonics with electronics promises revolutionary applications, from LiDAR to holographic displays. Although silicon photonics is maturing, realizing active nanophotonics in the ubiquitous bulk CMOS processes remains challenging. We introduce a fabless approach to embed active nanophotonics in bulk CMOS by co-designing the back-end-of-line metal layers for optical functionality. Us…
▽ More
Integrating nanophotonics with electronics promises revolutionary applications, from LiDAR to holographic displays. Although silicon photonics is maturing, realizing active nanophotonics in the ubiquitous bulk CMOS processes remains challenging. We introduce a fabless approach to embed active nanophotonics in bulk CMOS by co-designing the back-end-of-line metal layers for optical functionality. Using a 65nm CMOS process, we create plasmonic liquid crystal modulators with switching speeds 100x faster than commercial technologies. This zero-change nanophotonics method could equip mass-produced chips with optical communications, sensing and imaging. Embedding nanophotonics in the dominant electronics platform democratizes nanofabrication, spawning technologies from chip-scale LiDAR to holographic light-field displays.
△ Less
Submitted 16 November, 2023; v1 submitted 6 October, 2023;
originally announced October 2023.
-
Matching the photocurrent of perovskite/organic tandem solar modules by varying the cell width
Authors:
Jose Garcia Cerrillo,
Andreas Distler,
Fabio Matteocci,
Karen Forberich,
Michael Wagner,
Robin Basu,
Luigi Angelo Castriotta,
Farshad Jafarzadeh,
Francesca Brunetti,
Fu Yang,
Ning Li,
Asiel Neftali Corpus Mendoza,
Aldo Di Carlo,
Christoph J. Brabec,
Hans-Joachim Egelhaaf
Abstract:
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the c…
▽ More
Photocurrent matching in conventional monolithic tandem solar cells is achieved by choosing semiconductors with complementary absorption spectra and by carefully adjusting the optical properties of the complete top and bottom stacks. However, for thin film photovoltaic technologies at the module level, another design variable significantly alleviates the task of photocurrent matching, namely the cell width, whose modification can be readily realized by the adjustment of the module layout. Herein we demonstrate this concept at the experimental level for the first time for a 2T-mechanically stacked perovskite (FAPbBr3)/organic (PM6:Y6:PCBM) tandem mini-module, an unprecedented approach for these emergent photovoltaic technologies fabricated in an independent manner. An excellent Isc matching is achieved by tuning the cell widths of the perovskite and organic modules to 7.22 mm (PCEPVKT-mod= 6.69%) and 3.19 mm (PCEOPV-mod= 12.46%), respectively, leading to a champion efficiency of 14.94% for the tandem module interconnected in series with an aperture area of 20.25 cm2. Rather than demonstrating high efficiencies at the level of small lab cells, our successful experimental proof-of-concept at the module level proves to be particularly useful to couple devices with non-complementary semiconductors, either in series or in parallel electrical connection, hence overcoming the limitations imposed by the monolithic structure.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
Machine learning for ultra high throughput screening of organic solar cells: Solving the needle in the hay stack problem
Authors:
Markus Hußner,
Pacalaj A. Richard,
Olaf G. Müller-Dieckert,
Chao Liu,
Zhisheng Zhou,
Nahdia Majeed,
Steve Greedy,
Ivan Ramirez,
Ning Li,
Seyed Mehrdad Hosseini,
Christian Uhrich,
Christoph J. Brabec,
James R. Durrant,
Carsten Deibel,
Roderick C. I. MacKenzie
Abstract:
Over the last two decades the organic solar cell community has synthesised tens of thousands of novel polymers and small molecules in the search for an optimum light harvesting material. These materials were often crudely evaluated simply by measuring the current voltage curves in the light to obtain power conversion efficiencies (PCEs). Materials with low PCEs were quickly disregarded in the sear…
▽ More
Over the last two decades the organic solar cell community has synthesised tens of thousands of novel polymers and small molecules in the search for an optimum light harvesting material. These materials were often crudely evaluated simply by measuring the current voltage curves in the light to obtain power conversion efficiencies (PCEs). Materials with low PCEs were quickly disregarded in the search for higher efficiencies. More complex measurements such as frequency/time domain characterisation that could explain why the material performed as it did were often not performed as they were too time consuming/complex. This limited feedback forced the field to advance using a more or less random walk of material development and has significantly slowed progress. Herein, we present a simple technique based on machine learning that can quickly and accurately extract recombination time constants and charge carrier mobilities as a function of light intensity simply from light/dark JV curves alone. This technique reduces the time to fully analyse a working cell from weeks to seconds and opens up the possibility of not only fully characterising new devices as they are fabricated, but also data mining historical data sets for promising materials the community has over looked.
△ Less
Submitted 7 September, 2023;
originally announced September 2023.
-
Bypassing the single junction limit with advanced photovoltaic architectures
Authors:
Larry Lüer,
Marius Peters,
Dan Bornstein,
Vincent M. Le Corre,
Karen Forberich,
Dirk Guldi,
Christoph J. Brabec
Abstract:
In single-junction photovoltaic (PV) devices, the maximum achievable power conversion efficiency (PCE) is mainly limited by thermalization and transmission losses, because polychromatic solar irradiation cannot be matched to a single bandgap. Several concepts are being investigated to reduce these losses, such as the classical vertical multijunction cells, 'lateral' tandem cells, and multi-exciton…
▽ More
In single-junction photovoltaic (PV) devices, the maximum achievable power conversion efficiency (PCE) is mainly limited by thermalization and transmission losses, because polychromatic solar irradiation cannot be matched to a single bandgap. Several concepts are being investigated to reduce these losses, such as the classical vertical multijunction cells, 'lateral' tandem cells, and multi-exciton generation in the form of photon up- and down-conversion. While in theory, efficiencies exceeding 90% are possible (Landsberg or thermodynamic limit), there are severe practical limitations in terms of processability, cost, and spectral sensitivity. Here, we present a simulation environment based on Bayesian Optimization that is able to predict and optimize the electrical performance of multi-junction architectures, both vertical and lateral, in combination with multi-exciton materials. With respect to vertical stacks, we show that by optimizing bandgap energies of multi-exciton generation (MEG) layers, double junctions can reach efficiencies beyond those of five-junction tandem devices (57%). Moreover, such combinations of MEG and double junction devices would be highly resilient against spectral changes of the incoming sunlight. We point out three main challenges for PV material science to realize such devices. With respect to lateral architectures, we show that MEG layers might allow reducing nonradiative voltage losses following the Energy Gap Law. Finally, we show that the simulation environment is able to use machine learned quantitative structure-property relationships obtained from high-throughput experiments to virtually optimise the active layer (such as, the film thickness and the donor-acceptor ratio) for a given architecture. The simulation environment thus represents an important building block towards a digital twin of PV materials.
△ Less
Submitted 19 May, 2023;
originally announced May 2023.
-
Cutting 'lab-to fab' short: High Throughput Optimization and Process Assessment in Roll-to-Roll Slot Die Coating of Printed Photovoltaics
Authors:
Michael Wagner,
Andreas Distler,
Vincent M. Le Corre,
Simon Zapf,
Burak Baydar,
Hans-Dieter Schmidt,
Madeleine Heyder,
Karen Forberich,
Larry Lüer,
Christoph J. Brabec,
H. -J. Egelhaaf
Abstract:
Commercialization of printed photovoltaics requires knowledge of the optimal composition and microstructure of the single layers, and the ability to control these properties over large areas under industrial conditions. While microstructure optimization can be readily achieved by lab scale methods, the transfer from laboratory scale to a pilot production line ('lab to fab') is a slow and cumbersom…
▽ More
Commercialization of printed photovoltaics requires knowledge of the optimal composition and microstructure of the single layers, and the ability to control these properties over large areas under industrial conditions. While microstructure optimization can be readily achieved by lab scale methods, the transfer from laboratory scale to a pilot production line ('lab to fab') is a slow and cumbersome process. Here, we show how we can optimize the performance of organic solar cells and at the same time assess process performance in a 2D combinatorial approach directly on an industrially relevant slot die coating line. This is enabled by a multi-nozzle slot die coating head allowing parameter variations along and across the web. This modification allows us to generate and analyze 3750 devices in a single coating run, varying the active layer donor:acceptor ratio and the thickness of the electron transport layer (ETL). We use Gaussian Process Regression (GPR) to exploit the whole dataset for precise determination of the optimal parameter combination. Performance-relevant features of the active layer morphology are inferred from UV-Vis absorption spectra. By mapping morphology in this way, small undesired gradients of process conditions (extrusion rates, annealing temperatures) are detected and their effect on device performance is quantified. The correlation between process parameters, morphology and performance obtained by GPR provides hints to the underlying physics, which are finally quantified by automated high-throughput drift-diffusion simulations. This leads to the conclusion that voltage losses which are observed for very thin ETL coatings are due to incomplete coverage of the electrode by the ETL, which cause enhanced surface recombination.
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
An integrated system built for small-molecule semiconductors via high-throughput approaches
Authors:
Jianchang Wu,
Jiyun Zhang,
Manman Hu,
Patrick Reiser,
Luca Torresi,
Pascal Friederich,
Leopold Lahn,
Olga Kasian,
Dirk M. Guldi,
M. Eugenia Pérez-Ojeda,
Anastasia Barabash,
Juan S. Rocha-Ortiz,
Yicheng Zhao,
Zhiqiang Xie,
Junsheng Luo,
Yunuo Wang,
Sang Il Seok,
Jens A. Hauch,
Christoph J. Brabec
Abstract:
High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of molecular structure leads to the complexity of molecular properties, such as solubility, polarit…
▽ More
High-throughput synthesis of solution-processable structurally variable small-molecule semiconductors is both an opportunity and a challenge. A large number of diverse molecules provide a possibility for quick material discovery and machine learning based on experimental data. However, the diversity of molecular structure leads to the complexity of molecular properties, such as solubility, polarity, and crystallinity, which poses great challenges to solution processing and purification. Here, we first report an integrated system for the high-throughput synthesis, purification, and characterization of molecules with a large variety. Based on the principle of Like dissolves like, we combine theoretical calculations and a robotic platform to accelerate the purification of those molecules. With this platform, a material library containing 125 molecules and their optical-electric properties was built within a timeframe of weeks. More importantly, the high repeatability of recrystallization we design is a reliable approach to further upgrading and industrial production.
△ Less
Submitted 13 May, 2023;
originally announced May 2023.
-
Power-law density of states in organic solar cells revealed by the open-circuit voltage dependence of the ideality factor
Authors:
Maria Saladina,
Christopher Wöpke,
Clemens Göhler,
Ivan Ramirez,
Olga Gerdes,
Chao Liu,
Ning Li,
Thomas Heumüller,
Christoph J. Brabec,
Karsten Walzer,
Martin Pfeiffer,
Carsten Deibel
Abstract:
The density of states (DOS) is fundamentally important for understanding physical processes in organic disordered semiconductors, yet hard to determine experimentally. We evaluated the DOS by considering recombination via tail states and using the temperature and open-circuit voltage ($V_\mathrm{oc}$) dependence of the ideality factor in organic solar cells. By performing Suns-$V_\mathrm{oc}$ meas…
▽ More
The density of states (DOS) is fundamentally important for understanding physical processes in organic disordered semiconductors, yet hard to determine experimentally. We evaluated the DOS by considering recombination via tail states and using the temperature and open-circuit voltage ($V_\mathrm{oc}$) dependence of the ideality factor in organic solar cells. By performing Suns-$V_\mathrm{oc}$ measurements, we find that gaussian and exponential distributions describe the DOS only at a given quasi-Fermi level splitting. The DOS width increases linearly with the DOS depth, revealing the power-law DOS in these materials.
△ Less
Submitted 20 October, 2022;
originally announced October 2022.
-
A full degree-of-freedom photonic crystal spatial light modulator
Authors:
Christopher L. Panuski,
Ian R. Christen,
Momchil Minkov,
Cole J. Brabec,
Sivan Trajtenberg-Mills,
Alexander D. Griffiths,
Jonathan J. D. McKendry,
Gerald L. Leake,
Daniel J. Coleman,
Cung Tran,
Jeffrey St Louis,
John Mucci,
Cameron Horvath,
Jocelyn N. Westwood-Bachman,
Stefan F. Preble,
Martin D. Dawson,
Michael J. Strain,
Michael L. Fanto,
Dirk R. Englund
Abstract:
Harnessing the full complexity of optical fields requires complete control of all degrees-of-freedom within a region of space and time -- an open goal for present-day spatial light modulators (SLMs), active metasurfaces, and optical phased arrays. Here, we solve this challenge with a programmable photonic crystal cavity array enabled by four key advances: (i) near-unity vertical coupling to high-f…
▽ More
Harnessing the full complexity of optical fields requires complete control of all degrees-of-freedom within a region of space and time -- an open goal for present-day spatial light modulators (SLMs), active metasurfaces, and optical phased arrays. Here, we solve this challenge with a programmable photonic crystal cavity array enabled by four key advances: (i) near-unity vertical coupling to high-finesse microcavities through inverse design, (ii) scalable fabrication by optimized, 300 mm full-wafer processing, (iii) picometer-precision resonance alignment using automated, closed-loop "holographic trimming", and (iv) out-of-plane cavity control via a high-speed micro-LED array. Combining each, we demonstrate near-complete spatiotemporal control of a 64-resonator, two-dimensional SLM with nanosecond- and femtojoule-order switching. Simultaneously operating wavelength-scale modes near the space- and time-bandwidth limits, this work opens a new regime of programmability at the fundamental limits of multimode optical control.
△ Less
Submitted 21 April, 2022;
originally announced April 2022.
-
Traps and transport resistance: the next frontier for stable state-of-the-art non-fullerene acceptor solar cells
Authors:
Christopher Wöpke,
Clemens Göhler,
Maria Saladina,
Xiaoyan Du,
Li Nian,
Christopher Greve,
Chenhui Zhu,
Kaila M. Yallum,
Yvonne J. Hofstetter,
David Becker-Koch,
Ning Li,
Thomas Heumüller,
Ilya Milekhin,
Dietrich R. T. Zahn,
Christoph J. Brabec,
Natalie Banerji,
Yana Vaynzof,
Eva M. Herzig,
Roderick C. I. MacKenzie,
Carsten Deibel
Abstract:
Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires presence of both illumination and oxygen and features a short-circuit current reduct…
▽ More
Stability is one of the most important challenges facing organic solar cells (OSC) on their path to commercialization. In the high-performance material system PM6:Y6 studied here, investigate degradation mechanisms of inverted photovoltaic devices. We have identified two distinct degradation pathways: one requires presence of both illumination and oxygen and features a short-circuit current reduction, the other one is induced thermally and marked by severe losses of open-circuit voltage and fill factor. We focus our investigation on the thermally accelerated degradation. Our findings show that bulk material properties and interfaces remain remarkably stable, however, aging-induced defect state formation in the active layer remains the primary cause of thermal degradation. The increased trap density leads to higher non-radiative recombination, which limits open-circuit voltage and lowers charge carrier mobility in the photoactive layer. Furthermore, we find the trap-induced transport resistance to be the major reason for the drop in fill factor. Our results suggest that device lifetimes could be significantly increased by marginally suppressing trap formation, leading to a bright future for OSC.
△ Less
Submitted 22 March, 2022;
originally announced March 2022.
-
Phase-field simulation of liquid-vapor equilibrium and evaporation of fluid mixtures
Authors:
Olivier J. J. Ronsin,
DongJu Jang,
Hans-Joachim Egelhaaf,
Christoph J. Brabec,
Jens Harting
Abstract:
In solution-processing of thin films, the material layer is deposited from a solution composed of several solutes and solvents. The final morphology and hence the properties of the film often depend on the time needed for the evaporation of the solvents. This is typically the case for organic photoactive or electronic layers. Therefore, it is important to be able to predict the evaporation kinetic…
▽ More
In solution-processing of thin films, the material layer is deposited from a solution composed of several solutes and solvents. The final morphology and hence the properties of the film often depend on the time needed for the evaporation of the solvents. This is typically the case for organic photoactive or electronic layers. Therefore, it is important to be able to predict the evaporation kinetics of such mixtures. We propose here a new phase-field model for the simulation of evaporating fluid mixtures and simulate their evaporation kinetics. Similar to the Hertz-Knudsen theory, the local liquid-vapor equilibrium is assumed to be reached at the film surface and evaporation is driven by diffusion away from this gas layer. In the situation where the evaporation is purely driven by the liquid-vapor equilibrium, the simulations match the behavior expected theoretically from the free energy: for evaporation of pure solvents, the evaporation rate is constant and proportional to the vaporpressure. For mixtures, the evaporation rate is in general strongly time-dependent because of the changing composition of the film. Nevertheless, for highly non-ideal mixtures, such as poorly compatible fluids or polymer solutions, the evaporation rate becomes almost constant in the limit of low Biot numbers. The results of the simulation have been successfully compared to experiments on a polystyrene-toluene mixture. The model allows to take into account deformations of the liquid-vapor interface and therefore to simulate film roughness or dewetting.
△ Less
Submitted 9 November, 2021; v1 submitted 28 June, 2021;
originally announced June 2021.
-
The Evolution of Materials Acceleration Platforms -- Towards the Laboratory of the Future with AMANDA
Authors:
Jerrit Wagner,
Christian G. Berger,
Xiaoyan Du,
Tobias Stubhan,
Jens A. Hauch,
Christoph J. Brabec
Abstract:
The development of complex functional materials poses a multi-objective optimization problem in a large multidimensional parameter space. Solving it requires reproducible, user independent laboratory work and intelligent preselection of experiments. However, experimental materials science is a field where manual routines are still predominant, although other domains like pharmacy or chemistry have…
▽ More
The development of complex functional materials poses a multi-objective optimization problem in a large multidimensional parameter space. Solving it requires reproducible, user independent laboratory work and intelligent preselection of experiments. However, experimental materials science is a field where manual routines are still predominant, although other domains like pharmacy or chemistry have long used robotics and automation. As the number of publications on Materials Acceleration Platforms (MAPs) increases steadily, we review selected systems and fit them into the stages of a general material development process to examine the evolution of MAPs. Subsequently we present our approach to laboratory automation in materials science. We introduce AMANDA (Autonomous Materials and Device Application Platform), a generic platform for distributed materials research comprising a self-developed software backbone and several MAPs. One of them, LineOne (L1), is specifically designed to produce and characterize solution processed thin-film devices like organic solar cells (OSC). It is designed to perform precise closed-loop screenings of up to 272 device variations per day yet allows further upscaling. Each individual solar cell is fully characterized and all process steps are comprehensively documented. We want to demonstrate the capabilities of AMANDA L1 with OSCs based on PM6:Y6 with 13.7% efficiency when processed in air. Further we discuss challenges and opportunities of highly automated research platforms and elaborate on the future integration of additional techniques, methods and algorithms in order to advance to fully autonomous self-optimizing systems - a paradigm shift in functional materials development leading to the laboratory of the future.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
Bridging the gap between photovoltaics R&D and manufacturing with data-driven optimization
Authors:
Felipe Oviedo,
Zekun Ren,
Xue Hansong,
Siyu Isaac Parker Tian,
Kaicheng Zhang,
Mariya Layurova,
Thomas Heumueller,
Ning Li,
Erik Birgersson,
Shijing Sun,
Benji Mayurama,
Ian Marius Peters,
Christoph J. Brabec,
John Fisher III,
Tonio Buonassisi
Abstract:
Novel photovoltaics, such as perovskites and perovskite-inspired materials, have shown great promise due to high efficiency and potentially low manufacturing cost. So far, solar cell R&D has mostly focused on achieving record efficiencies, a process that often results in small batches, large variance, and limited understanding of the physical causes of underperformance. This approach is intensive…
▽ More
Novel photovoltaics, such as perovskites and perovskite-inspired materials, have shown great promise due to high efficiency and potentially low manufacturing cost. So far, solar cell R&D has mostly focused on achieving record efficiencies, a process that often results in small batches, large variance, and limited understanding of the physical causes of underperformance. This approach is intensive in time and resources, and ignores many relevant factors for industrial production, particularly the need for high reproducibility and high manufacturing yield, and the accompanying need of physical insights. The record-efficiency paradigm is effective in early-stage R&D, but becomes unsuitable for industrial translation, requiring a repetition of the optimization procedure in the industrial setting. This mismatch between optimization objectives, combined with the complexity of physical root-cause analysis, contributes to decade-long timelines to transfer new technologies into the market. Based on recent machine learning and technoeconomic advances, our perspective articulates a data-driven optimization framework to bridge R&D and manufacturing optimization approaches. We extend the maximum-efficiency optimization paradigm by considering two additional dimensions: a technoeconomic figure of merit and scalable physical inference. Our framework naturally aligns different stages of technology development with shared optimization objectives, and accelerates the optimization process by providing physical insights.
△ Less
Submitted 28 April, 2020;
originally announced April 2020.
-
A phase-field model for the evaporation of thin film mixtures
Authors:
Olivier J. J. Ronsin,
DongJu Jang,
Hans-Joachim Egelhaaf,
Christoph J. Brabec,
Jens Harting
Abstract:
The performance of solution-processed solar cells strongly depends on the geometrical structure and roughness of the photovoltaic layers formed during film drying. During the drying process, the interplay of crystallization and liquid-liquid demixing leads to the structure formation on the nano- and microscale and to the final rough film. In order to better understand how the film structure can be…
▽ More
The performance of solution-processed solar cells strongly depends on the geometrical structure and roughness of the photovoltaic layers formed during film drying. During the drying process, the interplay of crystallization and liquid-liquid demixing leads to the structure formation on the nano- and microscale and to the final rough film. In order to better understand how the film structure can be improved by process engineering, we aim at theoretically investigating these systems by means of phase-field simulations. We introduce an evaporation model based on the Cahn-Hilliard equation for the evolution of the fluid concentrations coupled to the Allen-Cahn equation for the liquid-vapour phase transformation. We demonstrate its ability to match the experimentally measured drying kinetics and study the impact of the parameters of our model. Furthermore, the evaporation of solvent blends and solvent-vapour annealing are investigated. The dry film roughness emerges naturally from our set of equations, as illustrated through preliminary simulations of spinodal decomposition and film drying on structured substrates.
△ Less
Submitted 3 March, 2020; v1 submitted 15 January, 2020;
originally announced January 2020.
-
Light Intensity Modulated Impedance Spectroscopy (LIMIS) in All-Solid-State Solar Cells at Open Circuit
Authors:
Osbel Almora,
Yicheng Zhao,
Xiaoyan Du,
Thomas Heumueller,
Gebhard J. Matt,
Germà Garcia-Belmonte,
Christoph J. Brabec
Abstract:
Potentiostatic impedance spectroscopy (IS) is a well stablished characterization technique for elucidating the electric resistivity and capacitive features of materials and devices. In the case of solar cells, by applying a small voltage perturbation the current signal is recorded and the recombination processes and defect distributions are among the typical outcomes in IS studies. In this work a…
▽ More
Potentiostatic impedance spectroscopy (IS) is a well stablished characterization technique for elucidating the electric resistivity and capacitive features of materials and devices. In the case of solar cells, by applying a small voltage perturbation the current signal is recorded and the recombination processes and defect distributions are among the typical outcomes in IS studies. In this work a photo-impedance approach, named light intensity modulated impedance spectroscopy (LIMIS), is first tested in all-solid-state photovoltaic cells by recording the individual photocurrent (IMPS) and photovoltage (IMVS) responsivity signals due to a small light perturbation at open-circuit (OC), and combining them: LIMIS=IMVS/IMPS. The experimental LIMIS spectra from silicon, organic, and perovskite solar cells are presented and compared with IS. An analysis of the equivalent circuit numerical models for total resistive and capacitive features is discussed. Our theoretical findings show a correction to the lifetimes evaluations by obtaining the total differential resistances and capacitances combining IS and LIMIS measurements. This correction addresses the discrepancies among different techniques, as shown with transient photovoltage. The experimental differences between IS and LIMIS (i) proves the unviability of the superposition principle, (ii) suggest a bias-dependent photo-current correction to the empirical Shockley equation of the steady-state current at different illumination intensities around OC and (iii) are proposed as a potential figure of merit for characterizing performance and stability of solar cells. In addition, new features are reported for the low-frequency capacitance of perovskite solar cells, measured by IS and LIMIS.
△ Less
Submitted 13 November, 2019;
originally announced November 2019.
-
Analytical Model for Light Modulating Impedance Spectroscopy (LIMIS) in All-Solid-State p-n Junction Solar Cells at Open-Circuit
Authors:
Osbel Almora,
Daniel Miravet,
Gebhard J. Matt,
Germà Garcia-Belmonte,
Christoph J. Brabec
Abstract:
Non-circuit theory drift-diffusion numerical simulation of standard potentiostatic impedance spectroscopy (IS) is a well-known strategy for characterization of materials and electronic devices. It implies the time-dependent solutions from the continuity and Poisson's equations under small perturbation of the bias boundary condition at the electrodes. But in the case of photo-sensitive devices a sm…
▽ More
Non-circuit theory drift-diffusion numerical simulation of standard potentiostatic impedance spectroscopy (IS) is a well-known strategy for characterization of materials and electronic devices. It implies the time-dependent solutions from the continuity and Poisson's equations under small perturbation of the bias boundary condition at the electrodes. But in the case of photo-sensitive devices a small light perturbation can be also taken modulating the generation rate along the absorber bulk. In that focus, this work approaches a set of analytical solutions for the signals of IS and intensity modulated photocurrent and photovoltage spectroscopies, IMPS and IMVS respectively, from one-sided p-n junction solar cells at open-circuit. Subsequently, a photo-impedance signal named light intensity modulated impedance spectroscopy (LIMIS equals IMVS over IMPS) is analytically simulated and its difference with respect to IS suggests a correlation with the surface charge carrier recombination velocity. This is an illustrative result and starting point for future more realistic numerical simulations.
△ Less
Submitted 13 November, 2019; v1 submitted 11 October, 2019;
originally announced October 2019.
-
Beyond Ternary OPV: High-Throughput Experimentation and Self-Driving Laboratories Optimize Multi-Component Systems
Authors:
Stefan Langner,
Florian Häse,
José Darío Perea,
Tobias Stubhan,
Jens Hauch,
Loïc M. Roch,
Thomas Heumueller,
Alán Aspuru-Guzik,
Christoph J. Brabec
Abstract:
Fundamental advances to increase the efficiency as well as stability of organic photovoltaics (OPVs) are achieved by designing ternary blends which represents a clear trend towards multi-component active layer blends. We report the development of high-throughput and autonomous experimentation methods for the effective optimization of multi-component polymer blends for OPVs. A method for automated…
▽ More
Fundamental advances to increase the efficiency as well as stability of organic photovoltaics (OPVs) are achieved by designing ternary blends which represents a clear trend towards multi-component active layer blends. We report the development of high-throughput and autonomous experimentation methods for the effective optimization of multi-component polymer blends for OPVs. A method for automated film formation enabling the fabrication of up to 6048 films per day is introduced. Equipping this automated experimentation platform with a Bayesian optimization, a self-driving laboratory is constructed that autonomously evaluates measurements to design and execute the next experiments. To demonstrate the potential of these methods, a four-dimensional parameter space of quaternary OPV blends is mapped and optimized for photo-stability. While with conventional approaches roughly 100 mg of material would be necessary, the robot based platform can screen 2,000 combinations with less than 10 mg and machine learning enabled autonomous experimentation identifies the stable compositions with less than 1 mg.
△ Less
Submitted 24 September, 2019; v1 submitted 8 September, 2019;
originally announced September 2019.
-
Embedding Physics Domain Knowledge into a Bayesian Network Enables Layer-by-Layer Process Innovation for Photovoltaics
Authors:
Zekun Ren,
Felipe Oviedo,
Muang Thway,
Siyu I. P. Tian,
Yue Wang,
Hansong Xue,
Jose Dario Perea,
Mariya Layurova,
Thomas Heumueller,
Erik Birgersson,
Armin Aberle,
Christoph J. Brabec,
Rolf Stangl,
Shijing Sun,
Qianxiao Li,
Fen Lin,
Ian Marius Peters,
Tonio Buonassisi
Abstract:
Process optimization of photovoltaic devices is a time-intensive, trial and error endeavor, without full transparency of the underlying physics, and with user-imposed constraints that may or may not lead to a global optimum. Herein, we demonstrate that embedding physics domain knowledge into a Bayesian network enables an optimization approach that identifies the root cause(s) of underperformance w…
▽ More
Process optimization of photovoltaic devices is a time-intensive, trial and error endeavor, without full transparency of the underlying physics, and with user-imposed constraints that may or may not lead to a global optimum. Herein, we demonstrate that embedding physics domain knowledge into a Bayesian network enables an optimization approach that identifies the root cause(s) of underperformance with layer by-layer resolution and reveals alternative optimal process windows beyond global black-box optimization. Our Bayesian-network approach links process conditions to materials descriptors (bulk and interface properties, e.g., bulk lifetime, doping, and surface recombination) and device performance parameters (e.g., cell efficiency), using a Bayesian inference framework with an autoencoder-based surrogate device-physics model that is 100x faster than numerical solvers. With the trained surrogate model, our approach is robust and reduces significantly the time consuming experimentalist intervention, even with small numbers of fabricated samples. To demonstrate our method, we perform layer-by-layer optimization of GaAs solar cells. In a single cycle of learning, we find an improved growth temperature for the GaAs solar cells without any secondary measurements, and demonstrate a 6.5% relative AM1.5G efficiency improvement above baseline and traditional black-box optimization methods.
△ Less
Submitted 3 November, 2019; v1 submitted 25 July, 2019;
originally announced July 2019.
-
Influence of the Hole Transporting Layer on the Thermal Stability of Inverted Organic Photovoltaics Using Accelerated Heat Lifetime Protocols
Authors:
Felix Hermerschmidt,
Achilleas Savva,
Efthymios Georgiou,
Sachetan M Tuladhar,
James R Durrant,
Iain McCulloch,
Donal DC Bradley,
Christoph J Brabec,
Jenny Nelson,
Stelios A Choulis
Abstract:
High power conversion efficiency (PCE) inverted organic photovoltaics (OPVs) usually use thermally evaporated MoO3 as a hole transporting layer (HTL). Despite the high PCE values reported, stability investigations are still limited and the exact degradation mechanisms of inverted OPVs using thermally evaporated MoO3 HTL remain unclear under different environmental stress factors. In this study, we…
▽ More
High power conversion efficiency (PCE) inverted organic photovoltaics (OPVs) usually use thermally evaporated MoO3 as a hole transporting layer (HTL). Despite the high PCE values reported, stability investigations are still limited and the exact degradation mechanisms of inverted OPVs using thermally evaporated MoO3 HTL remain unclear under different environmental stress factors. In this study, we monitor the accelerated lifetime performance of non-encapsulated inverted OPVs using thiophene-based active layer materials and evaporated MoO3 under the ISOS D-2 protocol (heat conditions 65 °C). The investigation of degradation mechanisms presented focus on optimized P3HT:PC[70]BM-based inverted OPVs. Specifically, we present a systematic study on the thermal stability of inverted P3HT:PC[70]BM OPVs using solution processed PEDOT:PSS and evaporated MoO3 HTL. Using a series of measurements and reverse engineering methods we report that the P3HT:PC[70]BM/MoO3 interface is the main origin of failure of P3HT:PC[70]BM-based inverted OPVs under intense heat conditions.
△ Less
Submitted 19 July, 2018;
originally announced July 2018.