-
Accelerating the Convergence of Coupled Cluster Calculations of the Homogeneous Electron Gas Using Bayesian Ridge Regression
Authors:
Julie Butler,
Morten Hjorth-Jensen,
Justin Lietz
Abstract:
The homogeneous electron gas is a system which has many applications in chemistry and physics. However, its infinite nature makes studies at the many-body level complicated due to long computational run times. Because it is size extensive, coupled cluster theory is capable of studying the homogeneous electron gas, but it still poses a large computational challenge as the time needed for precise ca…
▽ More
The homogeneous electron gas is a system which has many applications in chemistry and physics. However, its infinite nature makes studies at the many-body level complicated due to long computational run times. Because it is size extensive, coupled cluster theory is capable of studying the homogeneous electron gas, but it still poses a large computational challenge as the time needed for precise calculations increases in a polynomial manner with the number of particles and single-particle states. Consequently, achieving convergence in energy calculations becomes challenging, if not prohibited, due to long computational run times and high computational resource requirements. This paper develops the sequential regression extrapolation (SRE) to predict the coupled cluster energies of the homogeneous electron gas in the complete basis limit using Bayesian ridge regression to make predictions from calculations at truncated basis sizes. Using the SRE method we were able to predict the coupled cluster doubles energies for the electron gas across a variety of values of N and $r_s$, for a total of 70 predictions, with an average error of 4.28x10$^{-4}$ Hartrees while saving 88.9 hours of computational time. The SRE method can accurately extrapolate electron gas energies to the complete basis limit, saving both computational time and resources. Additionally, the SRE is a general method that can be applied to a variety of systems, many-body methods, and extrapolations.
△ Less
Submitted 4 June, 2024; v1 submitted 7 March, 2024;
originally announced March 2024.
-
Data Science Education in Undergraduate Physics: Lessons Learned from a Community of Practice
Authors:
Karan Shah,
Julie Butler,
Alexis Knaub,
Anıl Zenginoğlu,
William Ratcliff,
Mohammad Soltanieh-ha
Abstract:
It is becoming increasingly important that physics educators equip their students with the skills to work with data effectively. However, many educators may lack the necessary training and expertise in data science to teach these skills. To address this gap, we created the Data Science Education Community of Practice (DSECOP), bringing together graduate students and physics educators from differen…
▽ More
It is becoming increasingly important that physics educators equip their students with the skills to work with data effectively. However, many educators may lack the necessary training and expertise in data science to teach these skills. To address this gap, we created the Data Science Education Community of Practice (DSECOP), bringing together graduate students and physics educators from different institutions and backgrounds to share best practices and lessons learned from integrating data science into undergraduate physics education. In this article we present insights and experiences from this community of practice, highlighting key strategies and challenges in incorporating data science into the introductory physics curriculum. Our goal is to provide guidance and inspiration to educators who seek to integrate data science into their teaching, helping to prepare the next generation of physicists for a data-driven world.
△ Less
Submitted 16 June, 2024; v1 submitted 1 March, 2024;
originally announced March 2024.
-
Future Collider Options for the US
Authors:
P. C. Bhat,
S. Jindariani,
G. Ambrosio,
G. Apollinari,
S. Belomestnykh,
A. Bross,
J. Butler,
A. Canepa,
D. Elvira,
P. Fox,
Z. Gecse,
E. Gianfelice-Wendt,
P. Merkel,
S. Nagaitsev,
D. Neuffer,
H. Piekarz,
S. Posen,
T. Sen,
V. Shiltsev,
N. Solyak,
D. Stratakis,
M. Syphers,
G. Velev,
V. Yakovlev,
K. Yonehara
, et al. (1 additional authors not shown)
Abstract:
The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options…
▽ More
The United States has a rich history in high energy particle accelerators and colliders -- both lepton and hadron machines, which have enabled several major discoveries in elementary particle physics. To ensure continued progress in the field, U.S. leadership as a key partner in building next generation collider facilities abroad is essential; also critically important is the exploring of options to host a future collider in the U.S. The "Snowmass" study and the subsequent Particle Physics Project Prioritization Panel (P5) process provide the timely opportunity to develop strategies for both. What we do now will shape the future of our field and whether the U.S. will remain a world leader in these areas. In this white paper, we briefly discuss the US engagement in proposed collider projects abroad and describe future collider options for the U.S. We also call for initiating an integrated R\&D program for future colliders.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Learning from the Pandemic: the Future of Meetings in HEP and Beyond
Authors:
Mark S. Neubauer,
Todd Adams,
Jennifer Adelman-McCarthy,
Gabriele Benelli,
Tulika Bose,
David Britton,
Pat Burchat,
Joel Butler,
Timothy A. Cartwright,
Tomáš Davídek,
Jacques Dumarchez,
Peter Elmer,
Matthew Feickert,
Ben Galewsky,
Mandeep Gill,
Maciej Gladki,
Aman Goel,
Jonathan E. Guyer,
Bo Jayatilaka,
Brendan Kiburg,
Benjamin Krikler,
David Lange,
Claire Lee,
Nick Manganelli,
Giovanni Marchiori
, et al. (14 additional authors not shown)
Abstract:
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding…
▽ More
The COVID-19 pandemic has by-and-large prevented in-person meetings since March 2020. While the increasing deployment of effective vaccines around the world is a very positive development, the timeline and pathway to "normality" is uncertain and the "new normal" we will settle into is anyone's guess. Particle physics, like many other scientific fields, has more than a year of experience in holding virtual meetings, workshops, and conferences. A great deal of experimentation and innovation to explore how to execute these meetings effectively has occurred. Therefore, it is an appropriate time to take stock of what we as a community learned from running virtual meetings and discuss possible strategies for the future. Continuing to develop effective strategies for meetings with a virtual component is likely to be important for reducing the carbon footprint of our research activities, while also enabling greater diversity and inclusion for participation. This report summarizes a virtual two-day workshop on Virtual Meetings held May 5-6, 2021 which brought together experts from both inside and outside of high-energy physics to share their experiences and practices with organizing and executing virtual workshops, and to develop possible strategies for future meetings as we begin to emerge from the COVID-19 pandemic. This report outlines some of the practices and tools that have worked well which we hope will serve as a valuable resource for future virtual meeting organizers in all scientific fields.
△ Less
Submitted 29 June, 2021;
originally announced June 2021.
-
How much has the Sun influenced Northern Hemisphere temperature trends? An ongoing debate
Authors:
Ronan Connolly,
Willie Soon,
Michael Connolly,
Sallie Baliunas,
Johan Berglund,
C. J. Butler,
Rodolfo Gustavo Cionco,
Ana G. Elias,
Valery M. Fedorov,
Hermann Harde,
Gregory W. Henry,
Douglas V. Hoyt,
Ole Humlum,
David R. Legates,
Sebastian Lüning,
Nicola Scafetta,
Jan-Erik Solheim,
László Szarka,
Harry van Loon,
Víctor M. Velasco Herrera,
Richard C. Willson,
Hong Yan,
Weijia Zhang
Abstract:
To evaluate the role of Total Solar Irradiance (TSI) on Northern Hemisphere (NH) surface air temperature trends it is important to have reliable estimates of both quantities. 16 different TSI estimates were compiled from the literature. 1/2 of these estimates are low variability and 1/2 are high variability. 5 largely-independent methods for estimating NH temperature trends were evaluated using: 1…
▽ More
To evaluate the role of Total Solar Irradiance (TSI) on Northern Hemisphere (NH) surface air temperature trends it is important to have reliable estimates of both quantities. 16 different TSI estimates were compiled from the literature. 1/2 of these estimates are low variability and 1/2 are high variability. 5 largely-independent methods for estimating NH temperature trends were evaluated using: 1) only rural weather stations; 2) all available stations whether urban or rural (the standard approach); 3) only sea surface temperatures; 4) tree-ring temperature proxies; 5) glacier length temperature proxies. The standard estimates using urban as well as rural stations were anomalous as they implied a much greater warming in recent decades than the other estimates. This suggests urbanization bias might still be a problem in current global temperature datasets despite the conclusions of some earlier studies. Still, all 5 estimates confirm it is currently warmer than the late 19th century, i.e., there has been some global warming since 1850. For the 5 estimates of NH temperatures, the contribution from direct solar forcing for all 16 estimates of TSI was evaluated using simple linear least-squares fitting. The role of human activity in recent warming was then calculated by fitting the residuals to the UN IPCC's recommended anthropogenic forcings time series. For all 5 NH temperature series, different TSI estimates implied everything from recent global warming being mostly human-caused to it being mostly natural. It seems previous studies (including the most recent IPCC reports) that had prematurely concluded the former failed to adequately consider all the relevant estimates of TSI and/or to satisfactorily address the uncertainties still associated with NH temperature trend estimates. Several recommendations are provided on how future research could more satisfactorily resolve these issues.
△ Less
Submitted 26 May, 2021;
originally announced May 2021.
-
Test beam characterization of sensor prototypes for the CMS Barrel MIP Timing Detector
Authors:
R. Abbott,
A. Abreu,
F. Addesa,
M. Alhusseini,
T. Anderson,
Y. Andreev,
A. Apresyan,
R. Arcidiacono,
M. Arenton,
E. Auffray,
D. Bastos,
L. A. T. Bauerdick,
R. Bellan,
M. Bellato,
A. Benaglia,
M. Benettoni,
R. Bertoni,
M. Besancon,
S. Bharthuar,
A. Bornheim,
E. Brücken,
J. N. Butler,
C. Campagnari,
M. Campana,
R. Carlin
, et al. (174 additional authors not shown)
Abstract:
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about…
▽ More
The MIP Timing Detector will provide additional timing capabilities for detection of minimum ionizing particles (MIPs) at CMS during the High Luminosity LHC era, improving event reconstruction and pileup rejection. The central portion of the detector, the Barrel Timing Layer (BTL), will be instrumented with LYSO:Ce crystals and Silicon Photomultipliers (SiPMs) providing a time resolution of about 30 ps at the beginning of operation, and degrading to 50-60 ps at the end of the detector lifetime as a result of radiation damage. In this work, we present the results obtained using a 120 GeV proton beam at the Fermilab Test Beam Facility to measure the time resolution of unirradiated sensors. A proof-of-concept of the sensor layout proposed for the barrel region of the MTD, consisting of elongated crystal bars with dimensions of about 3 x 3 x 57 mm$^3$ and with double-ended SiPM readout, is demonstrated. This design provides a robust time measurement independent of the impact point of the MIP along the crystal bar. We tested LYSO:Ce bars of different thickness (2, 3, 4 mm) with a geometry close to the reference design and coupled to SiPMs manufactured by Hamamatsu and Fondazione Bruno Kessler. The various aspects influencing the timing performance such as the crystal thickness, properties of the SiPMs (e.g. photon detection efficiency), and impact angle of the MIP are studied. A time resolution of about 28 ps is measured for MIPs crossing a 3 mm thick crystal bar, corresponding to an MPV energy deposition of 2.6 MeV, and of 22 ps for the 4.2 MeV MPV energy deposition expected in the BTL, matching the detector performance target for unirradiated devices.
△ Less
Submitted 16 July, 2021; v1 submitted 15 April, 2021;
originally announced April 2021.
-
On the relationship between velocities, tractions, and intercellular stresses in the migrating epithelial monolayer
Authors:
Yoav Green,
Jeffrey J. Fredberg,
James P. Butler
Abstract:
The relationship between velocities, tractions, and intercellular stresses in the migrating epithelial monolayer are currently unknown. Ten years ago, a method known as Monolayer Stress Microscopy (MSM) was suggested from which the intercellular stresses could be computed given a traction field. The core assumption of MSM is that the intercellular stresses within the monolayer behave similarly to…
▽ More
The relationship between velocities, tractions, and intercellular stresses in the migrating epithelial monolayer are currently unknown. Ten years ago, a method known as Monolayer Stress Microscopy (MSM) was suggested from which the intercellular stresses could be computed given a traction field. The core assumption of MSM is that the intercellular stresses within the monolayer behave similarly to passive systems like a Hookean solid (an elastic sheet) or a Newtonian fluid (thin fluid film), implying a relation between the displacements/velocities and tractions. Due to the lack of independently measured intercellular stresses, validation of MSM is difficult. An alternative approach, which we give here, is based on simultaneous measurements of the monolayer velocity field and the cell/substrate tractions. With limited assumptions, the velocity field suffices to compute tractions, which we can then compare directly with those measured by traction force microscopy. We find that the calculated tractions and measured tractions are uncorrelated. Since both classical MSM and a purely viscous description of the relation between displacements or velocities and tractions depends on a linear constitutive law, it follows that some modification of these approaches is needed. One possible resolution is the inclusion of an active force. To this end, we give a new relationship between the active force density and the measured velocity(or displacement) field, and tractions, which by Newton's laws, must be obeyed.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
-
The Apollo ATCA Platform
Authors:
A. Albert,
J. Butler,
Z. Demiragli,
K. Finelli,
D. Gastler,
E. Hazen,
J. Rohlf,
S. Yuan,
T. Costa de Paiva,
V. Martinez Outschoorn,
S. Willocq,
C. Strohman,
P. Wittich,
R. Glein,
K. Ulmer
Abstract:
We have developed a novel and generic open-source platform - Apollo - which simplifies the design of custom Advanced Telecommunications Computing Architecture (ATCA) blades by factoring the design into generic infrastructure and application-specific parts. The Apollo "Service Module" provides the required ATCA Intelligent Platform Management Controller, power entry and conditioning, a powerful sys…
▽ More
We have developed a novel and generic open-source platform - Apollo - which simplifies the design of custom Advanced Telecommunications Computing Architecture (ATCA) blades by factoring the design into generic infrastructure and application-specific parts. The Apollo "Service Module" provides the required ATCA Intelligent Platform Management Controller, power entry and conditioning, a powerful system-on-module (SoM) computer, and flexible clock and communications infrastructure. The Apollo "Command Module" is customized for each application and typically includes two large field-programmable gate arrays, several hundred optical fiber interfaces operating at speeds up to 28 Gbps, memories, and other supporting infrastructure. The command and service module boards can be operated together or independently on the bench without need for an ATCA shelf.
△ Less
Submitted 14 November, 2019;
originally announced November 2019.
-
Test Beam Performance Measurements for the Phase I Upgrade of the CMS Pixel Detector
Authors:
M. Dragicevic,
M. Friedl,
J. Hrubec,
H. Steininger,
A. Gädda,
J. Härkönen,
T. Lampén,
P. Luukka,
T. Peltola,
E. Tuominen,
E. Tuovinen,
A. Winkler,
P. Eerola,
T. Tuuva,
G. Baulieu,
G. Boudoul,
L. Caponetto,
C. Combaret,
D. Contardo,
T. Dupasquier,
G. Gallbit,
N. Lumb,
L. Mirabito,
S. Perries,
M. Vander Donckt
, et al. (462 additional authors not shown)
Abstract:
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator…
▽ More
A new pixel detector for the CMS experiment was built in order to cope with the instantaneous luminosities anticipated for the Phase~I Upgrade of the LHC. The new CMS pixel detector provides four-hit tracking with a reduced material budget as well as new cooling and powering schemes. A new front-end readout chip mitigates buffering and bandwidth limitations, and allows operation at low comparator thresholds. In this paper, comprehensive test beam studies are presented, which have been conducted to verify the design and to quantify the performance of the new detector assemblies in terms of tracking efficiency and spatial resolution. Under optimal conditions, the tracking efficiency is $99.95\pm0.05\,\%$, while the intrinsic spatial resolutions are $4.80\pm0.25\,μ\mathrm{m}$ and $7.99\pm0.21\,μ\mathrm{m}$ along the $100\,μ\mathrm{m}$ and $150\,μ\mathrm{m}$ pixel pitch, respectively. The findings are compared to a detailed Monte Carlo simulation of the pixel detector and good agreement is found.
△ Less
Submitted 1 June, 2017;
originally announced June 2017.
-
Universal geometric constraints during epithelial jamming
Authors:
Lior Atia,
Dapeng Bi,
Yasha Sharma,
Jennifer A. Mitchel,
Bomi Gweon,
Stephan Koehler,
Stephen J. DeCamp,
Bo Lan,
Rebecca Hirsch,
Adrian F. Pegoraro,
Kyu Ha Lee,
Jacqueline Starr,
David A. Weitz,
Adam C. Martin,
Jin-Ah Park,
James P. Butler,
Jeffrey J. Fredberg
Abstract:
As an injury heals, an embryo develops, or a carcinoma spreads, epithelial cells systematically change their shape. In each of these processes cell shape is studied extensively, whereas variation of shape from cell-to-cell is dismissed most often as biological noise. But where do cell shape and variation of cell shape come from? Here we report that cell shape and shape variation are mutually const…
▽ More
As an injury heals, an embryo develops, or a carcinoma spreads, epithelial cells systematically change their shape. In each of these processes cell shape is studied extensively, whereas variation of shape from cell-to-cell is dismissed most often as biological noise. But where do cell shape and variation of cell shape come from? Here we report that cell shape and shape variation are mutually constrained through a relationship that is purely geometrical. That relationship is shown to govern maturation of the pseudostratified bronchial epithelial layer cultured from both non-asthmatic and asthmatic donors as well as formation of the ventral furrow in the epithelial monolayer of the Drosophila embryo in vivo. Across these and other vastly different epithelial systems, cell shape variation collapses to a family of distributions that is common to all and potentially universal. That distribution, in turn, is accounted for quantitatively by a mechanistic theory of cell-cell interaction showing that cell shape becomes progressively less elongated and less variable as the layer becomes progressively more jammed. These findings thus uncover a connection between jamming and geometry that is generic -spanning jammed living and inert systems alike- and demonstrate that proximity of the cell layer to the jammed state is the principal determinant of the most primitive features of epithelial cell shape and shape variation.
△ Less
Submitted 12 May, 2017;
originally announced May 2017.
-
Exothermicity is not a necessary condition for enhanced diffusion of enzymes
Authors:
Pierre Illien,
Xi Zhao,
Krishna K. Dey,
Peter J. Butler,
Ayusman Sen,
Ramin Golestanian
Abstract:
Recent experiments have revealed that the diffusivity of exothermic and fast enzymes is enhanced when they are catalytically active, and different physical mechanisms have been explored and quantified to account for this observation. We perform measurements on the endothermic and relatively slow enzyme aldolase, which also shows substrate-induced enhanced diffusion. We propose a new physical parad…
▽ More
Recent experiments have revealed that the diffusivity of exothermic and fast enzymes is enhanced when they are catalytically active, and different physical mechanisms have been explored and quantified to account for this observation. We perform measurements on the endothermic and relatively slow enzyme aldolase, which also shows substrate-induced enhanced diffusion. We propose a new physical paradigm, which reveals that the diffusion coefficient of a model enzyme hydrodynamically coupled to its environment increases significantly when undergoing changes in conformational fluctuations in a substrate-dependent manner, and is independent of the overall turnover rate of the underlying enzymatic reaction. Our results show that substrate-induced enhanced diffusion of enzyme molecules can be explained within an equilibrium picture, and that the exothermicity of the catalyzed reaction is not a necessary condition for the observation of this phenomenon.
△ Less
Submitted 14 April, 2017;
originally announced April 2017.
-
Large-surface-area diamond (111) crystal plates for applications in high-heat-load wavefront-preserving x-ray crystal optics
Authors:
S. Stoupin,
S. Antipov,
J. E. Butler,
A. V. Kolyadin,
A. Katrusha
Abstract:
We report fabrication and results of high-resolution X-ray topography characterization of diamond single crystal plates with a large surface area (10$\times$10 mm$^2$) and (111) crystal surface orientation for applications in high-heat-load X-ray crystal optics. The plates were fabricated by laser cutting of the (111) facets of diamond crystals grown using high-pressure high-temperature method. Th…
▽ More
We report fabrication and results of high-resolution X-ray topography characterization of diamond single crystal plates with a large surface area (10$\times$10 mm$^2$) and (111) crystal surface orientation for applications in high-heat-load X-ray crystal optics. The plates were fabricated by laser cutting of the (111) facets of diamond crystals grown using high-pressure high-temperature method. The intrinsic crystal quality of a selected 3$\times$7~mm$^2$ crystal region of one of the studied samples was found to be suitable for applications in wavefront-preserving high-heat-load crystal optics. The wavefront characterization was performed using sequential X-ray diffraction topography in the pseudo plane wave configuration and data analysis using rocking curve topography. The variation of the rocking curve width and peak position measured with a spatial resolution of 13$\times$13 $μm^2$ over the selected region were found to be less than one microradian.
△ Less
Submitted 10 May, 2016;
originally announced May 2016.
-
Design, Construction and Testing of the Digital Hadron Calorimeter (DHCAL) Electronics
Authors:
C. Adams,
A. Bambaugh,
B. Bilki,
J. Butler,
F. Corriveau,
T. Cundiff,
G. Drake,
K. Francis,
V. Guarino,
B. Haberichter,
E. Hazen,
J. Hoff,
S. Holm,
A. Kreps,
P. DeLurgio,
L. Dal Monte,
N. Mucia,
E. Norbeck,
D. Northacker,
Y. Onel,
B. Pollack,
J. Repond,
J. Schlereth,
J. R. Smith,
D. Trojand
, et al. (8 additional authors not shown)
Abstract:
A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first ord…
▽ More
A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first order the energy of incident particles in this calorimeter is reconstructed as being proportional to the number of pads with a signal over a given threshold. A large-scale prototype calorimeter with approximately 500,000 readout channels has been built and underwent extensive testing in the Fermilab and CERN test beams. This paper reports on the design, construction, and commissioning of the electronic readout system of this prototype calorimeter. The system is based on the DCAL front-end chip and a VME-based back-end.
△ Less
Submitted 4 March, 2016;
originally announced March 2016.
-
Design, Construction and Commissioning of the Digital Hadron Calorimeter - DHCAL
Authors:
C. Adams,
A. Bambaugh,
B. Bilki,
J. Butler,
F. Corriveau,
T. Cundiff,
G. Drake,
K. Francis,
B. Furst,
V. Guarino,
B. Haberichter,
E. Hazen,
J. Hoff,
S. Holm,
A. Kreps,
P. DeLurgio,
Z. Matijas,
L. Dal Monte,
N. Mucia,
E. Norbeck,
D. Northacker,
Y. Onel,
B. Pollack,
J. Repond,
J. Schlereth
, et al. (11 additional authors not shown)
Abstract:
A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first ord…
▽ More
A novel hadron calorimeter is being developed for future lepton colliding beam detectors. The calorimeter is optimized for the application of Particle Flow Algorithms (PFAs) to the measurement of hadronic jets and features a very finely segmented readout with 1 x 1 cm2 cells. The active media of the calorimeter are Resistive Plate Chambers (RPCs) with a digital, i.e. one-bit, readout. To first order the energy of incident particles in this calorimeter is reconstructed as being proportional to the number of pads with a signal over a given threshold. A large-scale prototype calorimeter with approximately 500,000 readout channels has been built and underwent extensive testing in the Fermilab and CERN test beams. This paper reports on the design, construction, and commissioning of this prototype calorimeter.
△ Less
Submitted 4 March, 2016;
originally announced March 2016.
-
Inverse Saffman-Taylor experiments with particles lead to capillarity driven fingering instabilities
Authors:
Ilyesse Bihi,
Michael Baudoin,
Jason E. Butler,
Christine Faille,
Farzam Zoueshtiagh
Abstract:
Using air to displace a viscous fluid contained in Hele-Shaw cell can create a fingering pattern at the interface between the fluids, if the capillary number exceeds a critical value. This Saffman-Taylor instability is revisited for the inverse case of a viscous fluid displacing air, when partially wettable hydrophilic particles are lying on the walls. Though the inverse case is otherwise stable,…
▽ More
Using air to displace a viscous fluid contained in Hele-Shaw cell can create a fingering pattern at the interface between the fluids, if the capillary number exceeds a critical value. This Saffman-Taylor instability is revisited for the inverse case of a viscous fluid displacing air, when partially wettable hydrophilic particles are lying on the walls. Though the inverse case is otherwise stable, the presence of the particles results in a fingering instability at low capillary number. This capillary-driven instability is driven-by the integration of particles into the interface which results from the minimization of the interfacial energy. Both axisymmetric and rectangular geometries are considered in order to quantify this phenomenon.
△ Less
Submitted 14 January, 2016;
originally announced January 2016.
-
Single Crystal Diamond Refractive Lens for Focusing of X-rays in Two Dimensions
Authors:
S. Antipov,
S. V. Baryshev,
J. E. Butler,
O. Antipova,
Z. Liu,
S. Stoupin
Abstract:
We report the fabrication and performance evaluation of single crystal diamond refractive x-ray lenses with a paraboloid of rotation form factor for focusing x-rays in two dimensions simultaneously. The lenses were manufactured using a femtosecond laser micromachining process and tested using x-ray synchrotron radiation. Such lenses were stacked together to form a standard compound refractive lens…
▽ More
We report the fabrication and performance evaluation of single crystal diamond refractive x-ray lenses with a paraboloid of rotation form factor for focusing x-rays in two dimensions simultaneously. The lenses were manufactured using a femtosecond laser micromachining process and tested using x-ray synchrotron radiation. Such lenses were stacked together to form a standard compound refractive lens (CRL). Due to the superior physical properties of the material, diamond CRLs are enabling and indispensable wavefront-preserving primary focusing optics for x-ray free-electron lasers and the next-generation synchrotron storage rings. They can be used for highly efficient refocusing of the extremely bright x-ray sources for secondary optical schemes with limited aperture such as nanofocusing Fresnel zone plates and multilayer Laue lenses.
△ Less
Submitted 9 July, 2015; v1 submitted 10 June, 2015;
originally announced June 2015.
-
Trapping in irradiated p-on-n silicon sensors at fluences anticipated at the HL-LHC outer tracker
Authors:
W. Adam,
T. Bergauer,
M. Dragicevic,
M. Friedl,
R. Fruehwirth,
M. Hoch,
J. Hrubec,
M. Krammer,
W. Treberspurg,
W. Waltenberger,
S. Alderweireldt,
W. Beaumont,
X. Janssen,
S. Luyckx,
P. Van Mechelen,
N. Van Remortel,
A. Van Spilbeeck,
P. Barria,
C. Caillol,
B. Clerbaux,
G. De Lentdecker,
D. Dobur,
L. Favart,
A. Grebenyuk,
Th. Lenzi
, et al. (663 additional authors not shown)
Abstract:
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determi…
▽ More
The degradation of signal in silicon sensors is studied under conditions expected at the CERN High-Luminosity LHC. 200 $μ$m thick n-type silicon sensors are irradiated with protons of different energies to fluences of up to $3 \cdot 10^{15}$ neq/cm$^2$. Pulsed red laser light with a wavelength of 672 nm is used to generate electron-hole pairs in the sensors. The induced signals are used to determine the charge collection efficiencies separately for electrons and holes drifting through the sensor. The effective trapping rates are extracted by comparing the results to simulation. The electric field is simulated using Synopsys device simulation assuming two effective defects. The generation and drift of charge carriers are simulated in an independent simulation based on PixelAV. The effective trapping rates are determined from the measured charge collection efficiencies and the simulated and measured time-resolved current pulses are compared. The effective trapping rates determined for both electrons and holes are about 50% smaller than those obtained using standard extrapolations of studies at low fluences and suggests an improved tracker performance over initial expectations.
△ Less
Submitted 7 May, 2015;
originally announced May 2015.
-
High-throughput screening for modulators of cellular contractile force
Authors:
Chan Young Park,
Enhua H. Zhou,
Dhananjay Tambe,
Bohao Chen,
Tera Lavoie,
Maria Dowell,
Anton Simeonov,
David J. Maloney,
Aleksandar Marinkovic,
Daniel J. Tschumperlin,
Stephanie Burger,
Matthew Frykenberg,
James P. Butler,
W. Daniel Stamer,
Mark Johnson,
Julian Solway,
Jeffrey J. Fredberg,
Ramaswamy Krishnan
Abstract:
When cellular contractile forces are central to pathophysiology, these forces comprise a logical target of therapy. Nevertheless, existing high-throughput screens are limited to upstream signaling intermediates with poorly defined relationship to such a physiological endpoint. Using cellular force as the target, here we screened libraries to identify novel drug candidates in the case of human airw…
▽ More
When cellular contractile forces are central to pathophysiology, these forces comprise a logical target of therapy. Nevertheless, existing high-throughput screens are limited to upstream signaling intermediates with poorly defined relationship to such a physiological endpoint. Using cellular force as the target, here we screened libraries to identify novel drug candidates in the case of human airway smooth muscle cells in the context of asthma, and also in the case of Schlemm's canal endothelial cells in the context of glaucoma. This approach identified several drug candidates for both asthma and glaucoma. We attained rates of 1000 compounds per screening day, thus establishing a force-based cellular platform for high-throughput drug discovery.
△ Less
Submitted 20 November, 2014;
originally announced November 2014.
-
Enhanced brightness and photostability of cyanine dyes by supramolecular containment
Authors:
Hari S. Muddana,
Samudra Sengupta,
Ayusman Sen,
Peter J. Butler
Abstract:
Ultrasensitive detection and real-time monitoring of biological processes can benefit significantly from the improved brightness and photostability of the popular organic dyes such as cyanines. Here, using a model cyanine dye, Cy3, we demonstrate that brightness and photostability of the dye is significantly altered when trapped in a molecular container, e.g. cucurbit[n]urils (CB[n]) and cyclodext…
▽ More
Ultrasensitive detection and real-time monitoring of biological processes can benefit significantly from the improved brightness and photostability of the popular organic dyes such as cyanines. Here, using a model cyanine dye, Cy3, we demonstrate that brightness and photostability of the dye is significantly altered when trapped in a molecular container, e.g. cucurbit[n]urils (CB[n]) and cyclodextrins (CD).Through computational modeling, we predicted that Cy3 forms a stable inclusion complex with three different hosts, CB[7], beta-CD, and methyl-beta-CD, which was further confirmed by single-molecule diffusion measurements using fluorescence correlation spectroscopy. The effect of supramolecular encapsulation on Cy3 photophysical properties was found to be highly host-specific. Up to three-fold increase in brightness of Cy3 was observed when the dye was trapped in methyl-beta-CD, due to an increase in both dye absorption and quantum yield. Steady-state and time-resolved spectroscopy of the various complexes revealed that host polarizability and restricted mobility of the dye in the host both contribute to the observed increase in molecular brightness. Furthermore, entrapment of the dye molecule in CDs resulted in a marked increase in dye photostability, whereas the dye degraded more rapidly in CB[7]. These results suggest that the changes in photophysical properties of the dye afforded by supramolecular encapsulation are highly dependent on the host molecule. The reported improvement in brightness and photostability together with the excellent biocompatibility of cyclodextrins makes supramolecular encapsulation a viable strategy for routine dye enhancement.
△ Less
Submitted 2 October, 2014;
originally announced October 2014.
-
Experimental demonstration of wakefield effects in a THz planar diamond accelerating structure
Authors:
S. Antipov,
C. Jing,
A. Kanareykin,
J. E. Butler,
V. Yakimenko,
M. Fedurin,
K. Kusche,
W. Gai
Abstract:
We have directly measured THz wakefields induced by a subpicosecond, intense relativistic electron bunch in a diamond loaded accelerating structure via the wakefield acceleration method. We present here the beam test results from the first diamond based structure. Diamond has been chosen for its high breakdown threshold and unique thermoconductive properties. Fields produced by a leading (drive) b…
▽ More
We have directly measured THz wakefields induced by a subpicosecond, intense relativistic electron bunch in a diamond loaded accelerating structure via the wakefield acceleration method. We present here the beam test results from the first diamond based structure. Diamond has been chosen for its high breakdown threshold and unique thermoconductive properties. Fields produced by a leading (drive) beam were used to accelerate a trailing (witness) electron bunch which followed the drive bunch at a variable distance. The energy gain of a witness bunch as a function of its separation from the drive bunch describes the time structure of the generated wakefield.
△ Less
Submitted 10 March, 2012; v1 submitted 25 January, 2012;
originally announced January 2012.
-
Tests of a Digital Hadron Calorimeter
Authors:
B. Bilki,
John Butler,
Ed May,
Georgios Mavromanolakis,
Edwin Norbeck,
Jose Repond,
David Underwood,
Lei Xia,
Qingmin Zhang
Abstract:
In the context of developing a hadron calorimeter with extremely fine granularity for the application of Particle Flow Algorithms to the measurement of jet energies at a future lepton collider, we report on extensive tests of a small scale prototype calorimeter. The calorimeter contained up to 10 layers of Resistive Plate Chambers (RPCs) with 2560 1 \times 1 cm2 readout pads, interleaved with stee…
▽ More
In the context of developing a hadron calorimeter with extremely fine granularity for the application of Particle Flow Algorithms to the measurement of jet energies at a future lepton collider, we report on extensive tests of a small scale prototype calorimeter. The calorimeter contained up to 10 layers of Resistive Plate Chambers (RPCs) with 2560 1 \times 1 cm2 readout pads, interleaved with steel absorber plates. The tests included both long-term Cosmic Ray data taking and measurements in particle beams, where the response to broadband muons and to pions and positrons with energies in the range of 1 - 16 GeV was established. Detailed measurements of the chambers efficiency as function of beam intensity have also been performed using 120 GeV protons at varying intensity. The data are compared to simulations based on GEANT4 and to analytical calculations of the rate limitations.
△ Less
Submitted 3 May, 2010;
originally announced May 2010.
-
Environmental Dependence of the Performance of Resistive Plate Chambers
Authors:
Burak Bilki,
John Butler,
Ed May,
Georgios Mavromanolakis,
Edwin Norbeck,
Jose Repond,
David Underwood,
Lei Xia,
Qingmin Zhang
Abstract:
This paper reports on the performance of Resistive Plate Chambers (RPCs) as function of the gas flow rate through the chambers and of environmental conditions, such as atmospheric pressure, ambient temperature and air humidity. The chambers are read out by pads with an area of 1 x 1 cm2 and a 1-bit resolution per pad. The performance measures include the noise rate as well as the detection effic…
▽ More
This paper reports on the performance of Resistive Plate Chambers (RPCs) as function of the gas flow rate through the chambers and of environmental conditions, such as atmospheric pressure, ambient temperature and air humidity. The chambers are read out by pads with an area of 1 x 1 cm2 and a 1-bit resolution per pad. The performance measures include the noise rate as well as the detection efficiency and pad multiplicity for cosmic rays. The measurements extended over a period of almost one year and are sensitive to possible long-term aging effects.
△ Less
Submitted 6 November, 2009;
originally announced November 2009.
-
Hadron Showers in a Digital Hadron Calorimeter
Authors:
Burak Bilki,
John Butler,
Georgios Mavromanolakis,
Ed May,
Edwin Norbeck,
Jose Repond,
David Underwood,
Lei Xia,
Qingmin Zhang
Abstract:
A small prototype of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements was exposed to positive pions of 1 >. 16 GeV energy from the Fermilab test beam. The event selection separates events with mostly non-interacting particles and events with hadronic showers which initiated in the front part of the calorimeter. The data are compared to a Monte Carlo…
▽ More
A small prototype of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements was exposed to positive pions of 1 >. 16 GeV energy from the Fermilab test beam. The event selection separates events with mostly non-interacting particles and events with hadronic showers which initiated in the front part of the calorimeter. The data are compared to a Monte Carlo simulation of the set-up. The paper concludes with predictions for the performance of an extended digital hadron calorimeter.
△ Less
Submitted 28 August, 2009;
originally announced August 2009.
-
A comparison of the static and dynamic properties of a semi-flexible polymer using lattice-Boltzmann and Brownian dynamics simulations
Authors:
Anthony J. C. Ladd,
Rahul Kekre,
Jason E. Butler
Abstract:
The aim of this paper is to compare results from lattice-Boltzmann and Brownian dynamics simulations of linear chain molecules. We have systematically varied the parameters that may affect the accuracy of the lattice-Boltzmann simulations, including grid resolution, temperature, polymer mass, and fluid viscosity. The effects of the periodic boundary conditions are minimized by an analytic correc…
▽ More
The aim of this paper is to compare results from lattice-Boltzmann and Brownian dynamics simulations of linear chain molecules. We have systematically varied the parameters that may affect the accuracy of the lattice-Boltzmann simulations, including grid resolution, temperature, polymer mass, and fluid viscosity. The effects of the periodic boundary conditions are minimized by an analytic correction for the different long-range interactions in periodic and unbounded systems. Lattice-Boltzmann results for the diffusion coefficient and Rouse mode relaxation times were found to be insensitive to temperature, which suggests that effects of hydrodynamic retardation are small. By increasing the resolution of the lattice-Boltzmann grid with respect to the polymer size, convergent results for the diffusion coefficient and relaxation times were obtained; these results agree with Brownian dynamics to within 1--2%.
△ Less
Submitted 17 May, 2009; v1 submitted 14 May, 2009;
originally announced May 2009.
-
Measurement of Positron Showers with a Digital Hadron Calorimeter
Authors:
Burak Bilki,
John Butler,
Ed May,
Georgios Mavromanolakis,
Edwin Norbeck,
Jose Repond,
David Underwood,
Lei Xia,
Qingmin Zhang
Abstract:
A small prototype of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements was exposed to positrons of 1 . 16 GeV energy from the Fermilab test beam. The response function, energy resolution, as well as measurements of the shape of electromagnetic showers are presented. The data are compared to a Monte Carlo simulation of the set-up.
A small prototype of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements was exposed to positrons of 1 . 16 GeV energy from the Fermilab test beam. The response function, energy resolution, as well as measurements of the shape of electromagnetic showers are presented. The data are compared to a Monte Carlo simulation of the set-up.
△ Less
Submitted 10 February, 2009;
originally announced February 2009.
-
Measurement of the Rate Capability of Resistive Plate Chambers
Authors:
B. Bilki,
J. Butler,
E. May,
G. Mavromanolakis,
E. Norbeck,
J. Repond,
D. Underwood,
L. Xia,
Q. Zhang
Abstract:
This paper reports on detailed measurements of the performance of Resistive Plate Chambers in a proton beam with variable intensity. Short term effects, such as dead time, are studied using consecutive events. On larger time scales, for various beam intensities the chamber.s efficiency is studied as a function of time within a spill of particles. The correlation between the efficiency of chamber…
▽ More
This paper reports on detailed measurements of the performance of Resistive Plate Chambers in a proton beam with variable intensity. Short term effects, such as dead time, are studied using consecutive events. On larger time scales, for various beam intensities the chamber.s efficiency is studied as a function of time within a spill of particles. The correlation between the efficiency of chambers placed in the same beam provides an indication of the lateral size of the observed effects. The measurements are compared to the predictions of a simple model based on the assumption that the resistive plates behave as pure resistors.
△ Less
Submitted 27 January, 2009;
originally announced January 2009.
-
Calibration of a digital hadron calorimeter with muons
Authors:
B. Bilki,
J. Butler,
T. Cundiff,
G. Drake,
W. Haberichter,
E. Hazen,
J. Hoff,
S. Holm,
A. Kreps,
E. May,
G. Mavromanolakis,
E. Norbeck,
D. Northacker,
Y. Onel,
J. Repond,
D. Underwood,
S. Wu,
L. Xia
Abstract:
The calibration procedure of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements is described. Results obtained with a stack of nine layers exposed to muons from the Fermilab test beam are presented.
The calibration procedure of a finely granulated digital hadron calorimeter with Resistive Plate Chambers as active elements is described. Results obtained with a stack of nine layers exposed to muons from the Fermilab test beam are presented.
△ Less
Submitted 17 April, 2008; v1 submitted 22 February, 2008;
originally announced February 2008.
-
RHIC Low-Energy Challenges and Plans
Authors:
T. Satogata,
L. Ahrens,
M. Bai,
J. M. Brennan,
D. Bruno,
J. Butler,
A. Drees,
A. Fedotov,
W. Fischer,
M. Harvey,
T. Hayes,
W. Jappe,
R. C. Lee,
W. W. MacKay,
N. Malitsky,
G. Marr,
R. Michnoff,
B. Oerter,
E. Pozdeyev,
T. Roser,
F. Severino,
K. Smith,
S. Tepikian,
N. Tsoupas
Abstract:
There is significant interest in RHIC heavy ion collisions at $\sqrt{s_{NN}}=$5--50 GeV, motivated by a search for the QCD phase transition critical point. The lowest energies for this search are well below the nominal RHIC gold injection collision energy of $\sqrt{s_{NN}}=19.6$ GeV. There are several operations challenges at RHIC in this regime, including longitudinal acceptance, magnet field q…
▽ More
There is significant interest in RHIC heavy ion collisions at $\sqrt{s_{NN}}=$5--50 GeV, motivated by a search for the QCD phase transition critical point. The lowest energies for this search are well below the nominal RHIC gold injection collision energy of $\sqrt{s_{NN}}=19.6$ GeV. There are several operations challenges at RHIC in this regime, including longitudinal acceptance, magnet field quality, lattice control, and luminosity monitoring. We report on the status of work to address these challenges, including results from beam tests of low energy RHIC operations with protons and gold, and potential improvements from different beam cooling scenarios.
△ Less
Submitted 12 October, 2007;
originally announced October 2007.
-
Atmosphere-like turbulence generation with surface-etched phase-screens
Authors:
Stefan Hippler,
Felix Hormuth,
David J. Butler,
Wolfgang Brandner,
Thomas Henning
Abstract:
We built and characterized an optical system that emulates the optical characteristics of an 8m-class telescope like the Very Large Telescope. The system contains rotating glass phase-screens to generate realistic atmosphere-like optical turbulence, as needed for testing multi-conjugate adaptive optics systems. In this paper we present an investigation of the statistical properties of two phase-…
▽ More
We built and characterized an optical system that emulates the optical characteristics of an 8m-class telescope like the Very Large Telescope. The system contains rotating glass phase-screens to generate realistic atmosphere-like optical turbulence, as needed for testing multi-conjugate adaptive optics systems. In this paper we present an investigation of the statistical properties of two phase-screens etched on glass-plate surfaces, obtained from Silios Technologies. Those etched screens are highly transmissive (above 85%) from 0.45 to 2.5 microns. From direct imaging, their Fried parameter r0 values (0.43+-0.04 mm and 0.81+-0.03 mm, respectively, at 0.633 microns) agree with the expectation to within 10%. This is also confirmed by a comparison of measured and expected Zernike coefficient variances. Overall, we find that those screens are quite reproducible, allowing sub-millimetre r0 values, which were difficult to achieve in the past. We conclude that the telescope emulator and phase-screens form a powerful atmospheric turbulence generator allowing systematic testing of different kinds of AO instrumentation.
△ Less
Submitted 15 September, 2006;
originally announced September 2006.
-
Design and performance of LED calibration system prototype for the lead tungstate crystal calorimeter
Authors:
V. A. Batarin,
J. Butler,
A. M. Davidenko,
A. A. Derevschikov,
Y. M. Goncharenko,
V. N. Grishin,
V. A. Kachanov,
V. Y. Khodyrev,
A. S. Konstantinov,
V. A. Kormilitsin,
V. I. Kravtsov,
Y. Kubota,
V. S. Lukanin,
Y. A. Matulenko,
Y. M. Melnick,
A. P. Meschanin,
N. E. Mikhalin,
N. G. Minaev,
V. V. Mochalov,
D. A. Morozov,
L. V. Nogach,
A. V. Ryazantsev,
P. A. Semenov,
V. K. Semenov,
K. E. Shestermanov
, et al. (6 additional authors not shown)
Abstract:
A highly stable monitoring system based on blue and red light emitting diodes coupled to a distribution network comprised of optical fibers has been developed for an electromagnetic calorimeter that uses lead tungstate crystals readout with photomultiplier tubes. We report of the system prototype design and on the results of laboratory tests. Stability better than 0.1% (r.m.s.) has been achieved…
▽ More
A highly stable monitoring system based on blue and red light emitting diodes coupled to a distribution network comprised of optical fibers has been developed for an electromagnetic calorimeter that uses lead tungstate crystals readout with photomultiplier tubes. We report of the system prototype design and on the results of laboratory tests. Stability better than 0.1% (r.m.s.) has been achieved during one week of prototype operation.
△ Less
Submitted 29 September, 2005; v1 submitted 28 September, 2005;
originally announced September 2005.
-
Correlation of Beam Electron and LED Signal Losses under Irradiation and Long-term Recovery of Lead Tungstate Crystals
Authors:
V. A. Batarin,
J. Butler,
A. M. Davidenko,
A. A. Derevschikov,
Y. M. Goncharenko,
V. N. Grishin,
V. A. Kachanov,
A. S. Konstantinov,
V. I. Kravtsov,
Y. Kubota,
V. S. Lukanin,
Y. A. Matulenko,
Y. M. Melnick,
A. P. Meschanin,
N. E. Mikhalin,
N. G. Minaev,
V. V. Mochalov,
D. A. Morozov,
L. V. Nogach,
A. V. Ryazantsev,
P. A. Semenov,
V. K. Semenov,
K. E. Shestermanov,
L. F. Soloviev,
S. Stone
, et al. (4 additional authors not shown)
Abstract:
Radiation damage in lead tungstate crystals reduces their transparency. The calibration that relates the amount of light detected in such crystals to incident energy of photons or electrons is of paramount importance to maintaining the energy resolution the detection system. We report on tests of lead tungstate crystals, read out by photomultiplier tubes, exposed to irradiation by monoenergetic…
▽ More
Radiation damage in lead tungstate crystals reduces their transparency. The calibration that relates the amount of light detected in such crystals to incident energy of photons or electrons is of paramount importance to maintaining the energy resolution the detection system. We report on tests of lead tungstate crystals, read out by photomultiplier tubes, exposed to irradiation by monoenergetic electron or pion beams. The beam electrons themselves were used to measure the scintillation light output, and a blue light emitting diode (LED) was used to track variations of crystals transparency. We report on the correlation of the LED measurement with radiation damage by the beams and also show that it can accurately monitor the crystals recovery from such damage.
△ Less
Submitted 13 April, 2005;
originally announced April 2005.
-
Study of Possible Scintillation Mechanism Damage in PbWO4 Crystals After Pion Irradiation
Authors:
V. A. Batarin,
J. Butler,
T. Y. Chen,
A. M. Davidenko,
A. A. Derevschikov,
Y. M. Goncharenko,
V. N. Grishin,
V. A. Kachanov,
A. S. Konstantinov,
V. I. Kravtsov,
V. A. Kormilitsin,
Y. Kubota,
V. S. Lukanin,
Y. A. Matulenko,
Y. M. Melnick,
A. P. Meschanin,
N. E. Mikhalin,
N. G. Minaev,
V. V. Mochalov,
D. A. Morozov,
L. V. Nogach,
A. V. Ryazantsev,
P. A. Semenov,
V. K. Semenov,
K. E. Shestermanov
, et al. (6 additional authors not shown)
Abstract:
We employed two independent methods to study possible damage to the scintillation mechanism in lead tungstate crystals due to irradiation by a 34 GeV pion beam. First, 10 crystals were irradiated simultaneously over 30 hours by a narrow beam, so that only a small region of each crystal was affected. We studied the effect of the irradiation on the light output non-uniformity. If a localized degra…
▽ More
We employed two independent methods to study possible damage to the scintillation mechanism in lead tungstate crystals due to irradiation by a 34 GeV pion beam. First, 10 crystals were irradiated simultaneously over 30 hours by a narrow beam, so that only a small region of each crystal was affected. We studied the effect of the irradiation on the light output non-uniformity. If a localized degradation was observed, it would indicate damage to the scintillation mechanism. Secondly, we detected light output using two phototubes attached to sides of a crystal. Since these phototubes detect scintillation light only from a small localized region, the effect of transmission loss should be minimal. We did not see any statistically significant evidence for scintillation mechanism damage with either method. The effect is consistent with zero, and the upper limit is 0.5% at 95% C.L.
△ Less
Submitted 22 October, 2004; v1 submitted 19 October, 2004;
originally announced October 2004.
-
3He Lung Imaging in an Open Access, Very-Low-Field Human MRI System
Authors:
R. W. Mair,
M. I. Hrovat,
S. Patz,
M. S. Rosen,
I. C. Ruset,
G. P. Topulos,
L. L. Tsai,
J. P. Butler,
F. W. Hersman,
R. L. Walsworth
Abstract:
The human lung and its functions are extremely sensitive to gravity, however the conventional high-field magnets used for most laser-polarized 3He MRI of the human lung restrict subjects to lying horizontally. Imaging of human lungs using inhaled laser-polarized 3He gas is demonstrated in an open-access very-low-magnetic-field (< 5 mT) MRI instrument. This prototype device employs a simple, low-…
▽ More
The human lung and its functions are extremely sensitive to gravity, however the conventional high-field magnets used for most laser-polarized 3He MRI of the human lung restrict subjects to lying horizontally. Imaging of human lungs using inhaled laser-polarized 3He gas is demonstrated in an open-access very-low-magnetic-field (< 5 mT) MRI instrument. This prototype device employs a simple, low-cost electromagnet, with an open geometry that allows variation of the orientation of the imaging subject in a two-dimensional plane. As a demonstration, two-dimensional lung images were acquired with 4 mm in-plane resolution from a subject in two orientations: lying supine, and sitting in a vertical position with one arm raised. Experience with this prototype device will guide optimization of a second-generation very-low-field imager to enable studies of human pulmonary physiology as a function of subject orientation.
△ Less
Submitted 16 December, 2004; v1 submitted 18 March, 2004;
originally announced March 2004.
-
Comparison of Radiation Damage in Lead Tungstate Crystals under Pion and Gamma Irradiation
Authors:
V. Batarin,
J. Butler,
T. Chen,
A. Davidenko,
A. Derevschikov,
Y. Goncharenko,
V. Grishin,
V. Kachanov,
V. Khodyrev,
A. Konstantinov,
V. Kravtsov,
Y. Kubota,
V. Lukanin,
Y. Matulenko,
Y. Melnick,
A. Meschanin,
N. Mikhalin,
N. Minaev,
V. Mochalov,
D. Morozov,
L. Nogach,
A. Ryazantsev,
P. Semenov,
V. Semenov,
K. Shestermanov
, et al. (6 additional authors not shown)
Abstract:
Studies of the radiation hardness of lead tungstate crystals produced by the Bogoroditsk Techno-Chemical Plant in Russia and the Shanghai Institute of Ceramics in China have been carried out at IHEP, Protvino. The crystals were irradiated by a 40-GeV pion beam. After full recovery, the same crystals were irradiated using a $^{137}Cs$ $γ$-ray source. The dose rate profiles along the crystal lengt…
▽ More
Studies of the radiation hardness of lead tungstate crystals produced by the Bogoroditsk Techno-Chemical Plant in Russia and the Shanghai Institute of Ceramics in China have been carried out at IHEP, Protvino. The crystals were irradiated by a 40-GeV pion beam. After full recovery, the same crystals were irradiated using a $^{137}Cs$ $γ$-ray source. The dose rate profiles along the crystal length were observed to be quite similar. We compare the effects of the two types of radiation on the crystals light output.
△ Less
Submitted 28 April, 2004; v1 submitted 10 December, 2003;
originally announced December 2003.
-
LED Monitoring System for the BTeV Lead Tungstate Crystal Calorimeter Prototype
Authors:
V. Batarin,
J. Butler,
A. Davidenko,
A. Derevschikov,
Y. Goncharenko,
V. Grishin,
V. Kachanov,
A. Konstantinov,
V. Kravtsov,
V. Kormilitsin,
Y. Kubota,
Y. Matulenko,
V. Medvedev,
Y. Melnick,
A. Meschanin,
N. Mikhalin,
N. Minaev,
V. Mochalov,
D. Morozov,
L. Nogach,
A. Ryazantsev,
P. Semenov,
V. Semenov,
K. Shestermanov,
L. Soloviev
, et al. (6 additional authors not shown)
Abstract:
We report on the performance of a monitoring system for a prototype calorimeter for the BTeV experiment that uses Lead Tungstate crystals coupled with photomultiplier tubes. The tests were carried out at the 70 GeV accelerator complex at Protvino, Russia.
We report on the performance of a monitoring system for a prototype calorimeter for the BTeV experiment that uses Lead Tungstate crystals coupled with photomultiplier tubes. The tests were carried out at the 70 GeV accelerator complex at Protvino, Russia.
△ Less
Submitted 8 July, 2004; v1 submitted 25 November, 2003;
originally announced November 2003.
-
Study of Radiation Damage in Lead Tungstate Crystals Using Intense High Energy Beams
Authors:
V. Batarin,
T. Brennan,
J. Butler,
H. Cheung,
V. Datsko,
A. Davidenko,
A. Derevschikov,
R. Dzhelyadin,
Y. Fomin,
V. Frolov,
Y. Goncharenko,
V. Grishin,
V. Kachanov,
V. Khodyrev,
K. Khroustalev,
A. Konoplyannikov,
A. Konstantinov,
V. Kravtsov,
Y. Kubota,
V. Leontiev,
V. Lukanin,
V. Maisheev,
Y. Matulenko,
Y. Melnick,
A. Meschanin
, et al. (18 additional authors not shown)
Abstract:
We report on the effects of radiation on the light output of lead tungstate crystals. The crystals were irradiated by pure, intense high energy electron and hadron beams as well as by a mixture of hadrons, neutrons and gammas. The crystals were manufactured in Bogoroditsk, Apatity (both Russia), and Shanghai (China). These studies were carried out at the 70-GeV proton accelerator in Protvino.
We report on the effects of radiation on the light output of lead tungstate crystals. The crystals were irradiated by pure, intense high energy electron and hadron beams as well as by a mixture of hadrons, neutrons and gammas. The crystals were manufactured in Bogoroditsk, Apatity (both Russia), and Shanghai (China). These studies were carried out at the 70-GeV proton accelerator in Protvino.
△ Less
Submitted 5 October, 2002;
originally announced October 2002.
-
Precision Measurement of Energy and Position Resolutions of the BTeV Electromagnetic Calorimeter Prototype
Authors:
V. Batarin,
T. Brennan,
J. Butler,
H. Cheung,
A. Derevschikov,
Y. Fomin,
V. Frolov,
Y. Goncharenko,
V. Grishin,
V. Kachanov,
V. Khodyrev,
K. Khroustalev,
A. Konstantinov,
V. Kravtsov,
Y. Kubota,
V. Leontiev,
V. Maisheev,
Y. Matulenko,
Y. Melnick,
A. Meschanin,
N. Mikhalin,
N. Minaev,
V. Mochalov,
D. Morozov,
R. Mountain
, et al. (12 additional authors not shown)
Abstract:
The energy dependence of the energy and position resolutions of the electromagnetic calorimeter prototype made of lead tungstate crystals produced in Bogoroditsk (Russia) and Shanghai (China) is presented. These measurementswere carried out at the Protvino accelerator using a 1 to 45 GeV electron beam. The crystals were coupled to photomultiplier tubes. The dependence of energy and position reso…
▽ More
The energy dependence of the energy and position resolutions of the electromagnetic calorimeter prototype made of lead tungstate crystals produced in Bogoroditsk (Russia) and Shanghai (China) is presented. These measurementswere carried out at the Protvino accelerator using a 1 to 45 GeV electron beam. The crystals were coupled to photomultiplier tubes. The dependence of energy and position resolutions on different factors as well as the measured electromagnetic shower lateral profile are presented.
△ Less
Submitted 5 November, 2002; v1 submitted 21 September, 2002;
originally announced September 2002.
-
Development of a Momentum Determined Electron Beam in the 1 -45 GeV Range
Authors:
V. A. Batarin,
J. Butler,
A. A. Derevschikov,
Yu. V. Formin,
V. Frolov,
V. N. Grishin,
V. A. Kachanov,
V. Y. Khodyrev,
A. S. Konstantinov,
V. I. Krasvtsov,
Y. Kubota,
V. M. Leontiev,
V. A. Maisheev,
Ya. A. Matulenko,
A. P. Meschanin,
Y. M. Melnick,
N. G. Minaev,
V. V. Mochalov,
D. A. Morozov,
L. V. Nogach,
P. A. Semenov,
K. E. Shestermanov,
L. F. Soloviev,
V. L. Solovianov,
S. Stone
, et al. (5 additional authors not shown)
Abstract:
A beam line for electrons with energies in the range of 1 to 45 GeV, low contamination of hadrons and muons and high intensity up to 10^6 per accelerator spill at 27 GeV was setup at U70 accelerator in Protvino, Russia. A beam tagging system based on drift chambers with 160 micron resolution was able to measure relative electron beam momentum precisely. The resolution sigma_p p was 0.13% at 45 G…
▽ More
A beam line for electrons with energies in the range of 1 to 45 GeV, low contamination of hadrons and muons and high intensity up to 10^6 per accelerator spill at 27 GeV was setup at U70 accelerator in Protvino, Russia. A beam tagging system based on drift chambers with 160 micron resolution was able to measure relative electron beam momentum precisely. The resolution sigma_p p was 0.13% at 45 GeV where multiple scattering is negligible. This test beam setup provided the possibility to study properties of lead tungstate crystals (PbWO_4) for the BTeV experiment at Fermilab.
△ Less
Submitted 9 August, 2002;
originally announced August 2002.