-
Deformation monitoring with Sentinel-1 Wave mode data
Authors:
Piyush S. Agram,
Matthew T. Calef,
Kelly M. Olsen,
Kimberly Carlson,
Scott Arko
Abstract:
We describe the salient characteristics of Sentinel-1 wave (WV) mode vignettes. We describe our approach for working with WV mode data that enables vignette-based data access and processing, thereby eliminating the Sentinel-1 Single Look Complex (SLC) data packaging and current archive metadata conventions as a bottleneck to large scale processing. We discuss the spatial and temporal coverage of S…
▽ More
We describe the salient characteristics of Sentinel-1 wave (WV) mode vignettes. We describe our approach for working with WV mode data that enables vignette-based data access and processing, thereby eliminating the Sentinel-1 Single Look Complex (SLC) data packaging and current archive metadata conventions as a bottleneck to large scale processing. We discuss the spatial and temporal coverage of Sentinel-1 WV mode data and show that a large volume of data has been acquired over land masses in this mode, thus allowing us to use it for land monitoring applications as well as ocean applications. For targeted infrastructure monitoring studies, we are able to generate coregistered, geocoded stacks of WV mode SLCs for any area of interest (AOI) with sufficient wave mode coverage, in a few minutes. We demonstrate the applicability of using WV mode data for deformation monitoring applications. Finally, we discuss the benefits and limitations of working with Sentinel-1 WV mode data.
△ Less
Submitted 20 June, 2024;
originally announced June 2024.
-
Status of the IOTA Proton Injector
Authors:
D. Edstrom Jr.,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
J. -P. Carneiro,
H. Piekarz,
A. Shemyakin,
A. Valishev
Abstract:
The IOTA Proton Injector (IPI), currently under installation at the Fermilab Accelerator Science and Technology facility (FAST), is a machine capable of delivering 20 mA pulses of protons at 2.5 MeV to the Integrable Optics Test Accelerator (IOTA) ring. First beam in the IPI beamline is anticipated in the first half of 2024, when it will operate alongside the existing electron injector beamline to…
▽ More
The IOTA Proton Injector (IPI), currently under installation at the Fermilab Accelerator Science and Technology facility (FAST), is a machine capable of delivering 20 mA pulses of protons at 2.5 MeV to the Integrable Optics Test Accelerator (IOTA) ring. First beam in the IPI beamline is anticipated in the first half of 2024, when it will operate alongside the existing electron injector beamline to facilitate further beam physics research and continued development of novel accelerator technologies at the IOTA ring. This report details the expected operational profile, known challenges, and the current state of installation.
△ Less
Submitted 20 October, 2023;
originally announced October 2023.
-
IOTA Proton Injector Beamline Installation
Authors:
D. Edstrom Jr,
D. Broemmelsiek,
K. Carlson,
J. -P. Carneiro,
H. Piekarz,
A. Romanov,
A. Shemyakin,
A. Valishev
Abstract:
The IOTA Proton Injector (IPI), currently under installation at the Fermilab Accelerator Science and Technology facility, is a beamline capable of delivering 20-mA pulses of protons at 2.5 MeV to the Integrable Optics Test Accelerator (IOTA) ring. First beam in the IPI beamline is anticipated in 2023, when it will operate alongside the existing electron injector beamline to facilitate further fund…
▽ More
The IOTA Proton Injector (IPI), currently under installation at the Fermilab Accelerator Science and Technology facility, is a beamline capable of delivering 20-mA pulses of protons at 2.5 MeV to the Integrable Optics Test Accelerator (IOTA) ring. First beam in the IPI beamline is anticipated in 2023, when it will operate alongside the existing electron injector beamline to facilitate further fundamental physics research and continued development of novel accelerator technologies in the IOTA ring. This report details the expected operational profile, known challenges, and the current state of installation.
△ Less
Submitted 16 May, 2023;
originally announced May 2023.
-
Experimental demonstration of OSC at IOTA: IOTA Run #3 Report
Authors:
J. Jarvis,
V. Lebedev,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
S. Chattopadhyay,
A. Dick,
D. Edstrom,
I. Lobach,
S. Nagaitsev,
H. Piekarz,
P. Piot,
J. Ruan,
J. Santucci,
G. Stancari,
A. Valishev
Abstract:
Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude [1-3]. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical ampl…
▽ More
Optical Stochastic Cooling (OSC) is an optical-bandwidth extension of Stochastic Cooling that could advance the state-of-the-art cooling rate in beam cooling by three to four orders of magnitude [1-3]. The concept of OSC was first suggested in the early 1990s by Zolotorev, Zholents and Mikhailichenko, and replaced the microwave hardware of SC with optical analogs, such as wigglers and optical amplifiers. A number of variations on the original OSC concept have been proposed, and while a variety of proof-of-principle demonstrations and operational uses have been considered, the concept was not experimentally demonstrated up to now [4-9]. An OSC R&D program has been underway at IOTA for the past several years [4]. Run #3 of the IOTA ring, which began in Nov. 2020 and concluded in Aug. 2021, was focused on the worlds first experimental demonstration of OSC. The experimental program was successful in demonstrating and characterizing the OSC physics with the major outcomes including strong cooling in one, two and three dimensions, validation of the theoretical models of OSC and the demonstration of OSC with a single electron. This report briefly describes the activities and major milestones of the OSC program during Run #3. Detailed descriptions of the OSC theory, conceptual design and hardware elements can be found in reference [4].
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
First Experimental Demonstration of Optical Stochastic Cooling
Authors:
J. Jarvis,
V. Lebedev,
A. Romanov,
D. Broemmelsiek,
K. Carlson,
S. Chattopadhyay,
A. Dick,
D. Edstrom,
I. Lobach,
S. Nagaitsev,
H. Piekarz,
P. Piot,
J. Ruan,
J. Santucci,
G. Stancari,
A. Valishev
Abstract:
Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success1. Beam cooling reduces the spread in particle positions and momenta, while keeping the number of particles constant, and combats diffusive effects, thereby enabling particle accumulation and the prod…
▽ More
Particle accelerators and storage rings have been transformative instruments of discovery, and, for many applications, innovations in particle-beam cooling have been a principal driver of that success1. Beam cooling reduces the spread in particle positions and momenta, while keeping the number of particles constant, and combats diffusive effects, thereby enabling particle accumulation and the production and preservation of intense beams. In the case of particle colliders, cooling increases the likelihood of observing rare physics events. One of the most important conceptual and technological advances in this area was stochastic cooling (SC), which was instrumental in the discovery of the W and Z bosons at CERN and the top quark at Fermilab2-6. SC reduces the random motion of the beam particles through granular sampling and correction of the beams phase-space structure, thus bearing resemblance to a Maxwells demon. The extension of SC from the microwave regime up to optical frequencies and bandwidths has long been pursued as it could increase the achievable cooling rates by three to four orders of magnitude and provide a powerful new tool for future accelerators. First proposed nearly thirty years ago, Optical Stochastic Cooling (OSC) replaces the conventional microwave elements of SC with optical-frequency analogs and is, in principle, compatible with any species of charged-particle beam7,8. Here we describe the first experimental demonstration of OSC in a proof-of-principle experiment9 at the Fermi National Accelerator Laboratorys Integrable Optics Test Accelerator10.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Commissioning and Operation of FAST Electron Linac at Fermilab
Authors:
A. Romanov,
C. Baffes,
D. R. Broemmelsiek,
K. Carlson,
D. J. Crawford,
N. Eddy,
D. Edstrom Jr.,
E. R. Harms,
J. Hurd,
M. Kucera,
J. Leibfritz,
I. Rakhno,
J. Reid,
J. Ruan,
J. Santucci,
V. Shiltsev,
G. Stancari,
R. Thurman-Keup,
A. Valishev,
A. Warner
Abstract:
We report results of the beam commissioning and first operation of the 1.3 GHz superconducting RF electron linear accelerator at Fermilab Accelerator Science and Technology (FAST) facility. Construction of the linac was completed and the machine was commissioned with beam in 2017. The maximum total beam energy of about 300 MeV was achieved with the record energy gain of 250 MeV in the ILC-type SRF…
▽ More
We report results of the beam commissioning and first operation of the 1.3 GHz superconducting RF electron linear accelerator at Fermilab Accelerator Science and Technology (FAST) facility. Construction of the linac was completed and the machine was commissioned with beam in 2017. The maximum total beam energy of about 300 MeV was achieved with the record energy gain of 250 MeV in the ILC-type SRF cryomodule. The photoinjector was tuned to produce trains of 200 pC bunches with a frequency of 3 MHz at a repetition rate of 1 Hz. This report describes the aspects of machine commissioning such as tuning of the SRF cryomodule and beam optics optimization. We also present highlights of an experimental program carried out parasitically during the two-month run, including studies of wake-fields, and advanced beam phase space manipulation.
△ Less
Submitted 9 November, 2018;
originally announced November 2018.
-
Commissioning And First Results From The Fermilab Cryomodule Test Stand
Authors:
E. R. Harms,
M. Awida,
C. Baffes,
K. Carlson,
S. Chandrasekaran,
B. Chase,
E. Cullerton,
J. Edelen,
J. Einstein-Curtis,
C. Ginsburg,
A. Grassellino,
B. Hansen,
J. Holzbauer,
S. Kazakov,
T. Khabiboulline,
M. Kucera,
J. Leibfritz,
A. Lunin,
D. McDowell,
M. McGee,
D. Nicklaus,
D. Orris,
J. Ozelis,
J. Patrick,
T. Petersen
, et al. (12 additional authors not shown)
Abstract:
A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overv…
▽ More
A new test stand dedicated to Superconducting Radiofrequency (SRF) cryomodule testing, CMTS1, has been commissioned and is now in operation at Fermilab. The first device to be cooled down and powered in this facility is the prototype 1.3 GHz cryomodule assembled at Fermilab for LCLS-II. We describe the demonstrated capabilities of CMTS1, report on steps taken during commissioning, provide an overview of first test results, and survey future plans.
△ Less
Submitted 7 May, 2018;
originally announced May 2018.
-
Mechanical stability study for Integrable Optics Test Accelerator at Fermilab
Authors:
M. W. McGee,
R. Andrews,
K. Carlson,
J. Leibfritz,
L. Nobrega,
A. Valishev
Abstract:
The Integrable Optics Test Accelerator (IOTA) is proposed for operation at Fermilab. The goal of IOTA is to create practical nonlinear accelerator focusing systems with a large frequency spread and stable particle motion. The IOTA is a 40 m circumference, 150 MeV (e-), 2.5 MeV (p+) diagnostic test ring. A heavy low frequency steel floor girder is proposed as the primary tier for IOTA device compon…
▽ More
The Integrable Optics Test Accelerator (IOTA) is proposed for operation at Fermilab. The goal of IOTA is to create practical nonlinear accelerator focusing systems with a large frequency spread and stable particle motion. The IOTA is a 40 m circumference, 150 MeV (e-), 2.5 MeV (p+) diagnostic test ring. A heavy low frequency steel floor girder is proposed as the primary tier for IOTA device component support. Two design lengths; (8) 3.96 m and (2) 3.1 m long girders with identical cross section completely encompass the ring. This study focuses on the 3.96 m length girder and the development of a working prototype. Hydrostatic Level Sensor (HLS), temperature, metrology and fast motion measurements characterize the anticipated mechanical stability of the IOTA ring.
△ Less
Submitted 1 July, 2016;
originally announced July 2016.
-
Test Results of Tesla-Style Cryomodules at Fermilab
Authors:
E. Harms,
K. Carlson,
B. Chase,
D. Crawford,
E. Cullerton,
D. Edstrom,
A. Hocker,
M. Kucera,
J. Leibfritz,
O. Nezhevenko,
D. Nicklaus,
Y. Pischalnikov,
P. Prieto,
J. Reid,
W. Schappert,
P. Varghese
Abstract:
Commissioning and operation of the first Tesla-style Cryomodule (CM-1) at Fermilab was concluded in recent months. A second Tesla Type III+ module, RFCA002, will be replacing it. CM-1 is the first 8-cavity ILC style cryomodule to be built at Fermilab and also the first accelerating cryomodule of the Advanced Superconducting Test Accelerator (ASTA). We report on the operating results of both of the…
▽ More
Commissioning and operation of the first Tesla-style Cryomodule (CM-1) at Fermilab was concluded in recent months. A second Tesla Type III+ module, RFCA002, will be replacing it. CM-1 is the first 8-cavity ILC style cryomodule to be built at Fermilab and also the first accelerating cryomodule of the Advanced Superconducting Test Accelerator (ASTA). We report on the operating results of both of these cryomodules.
△ Less
Submitted 31 January, 2013;
originally announced January 2013.
-
Status and Plans for a Superconducting RF Accelerator Test Facility at Fermilab
Authors:
J. Leibfritz,
R. Andrews,
C. M. Baffes,
K. Carlson,
B. Chase,
M. D. Church,
E. R. Harms,
A. L. Klebaner,
M. Kucera,
A. Martinez,
S. Nagaitsev,
L. E. Nobrega,
P. Piot,
J. Reid,
M. Wendt,
S. J. Wesseln
Abstract:
The Advanced Superconducting Test Acccelerator (ASTA) is being constructed at Fermilab. The existing New Muon Lab (NML) building is being converted for this facility. The accelerator will consist of an electron gun, injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, multiple downstream beamlines for testing diagnostics and conducting various beam tests, and a hig…
▽ More
The Advanced Superconducting Test Acccelerator (ASTA) is being constructed at Fermilab. The existing New Muon Lab (NML) building is being converted for this facility. The accelerator will consist of an electron gun, injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, multiple downstream beamlines for testing diagnostics and conducting various beam tests, and a high power beam dump. When completed, it is envisioned that this facility will initially be capable of generating a 750-MeV electron beam with ILC beam intensity. An expansion of this facility was recently completed that will provide the capability to upgrade the accelerator to a total beam energy of 1.5-GeV. Two new buildings were also constructed adjacent to the ASTA facility to house a new cryogenic plant and multiple superconducting RF (SRF) cryomodule test stands. In addition to testing accelerator components, this facility will be used to test RF power systems, instrumentation, and control systems for future SRF accelerators such as the ILC and Project-X. This paper describes the current status and overall plans for this facility.
△ Less
Submitted 29 January, 2013;
originally announced January 2013.
-
RF Test Results from Cryomodule 1 at the Fermilab SRF Beam Test Facility
Authors:
E. Harms,
K. Carlson,
B. Chase,
E. Cullerton,
A. Hocker,
C. Jensen,
P. Joireman,
A. Klebaner,
T. Kubicki,
M. Kucera,
A. Legan,
J. Leibfritz,
A. Martinez,
M. McGee,
S. Nagaitsev,
O. Nezhevenko,
D. Nicklaus,
H. Pfeffer,
Y. Pischalnikov,
P. Prieto,
J. Reid,
W. Schappert,
V. Tupikov,
P. Varghese,
J. Branlard
Abstract:
Powered operation of Cryomodule 1 (CM-1) at the Fermilab SRF Beam Test Facility began in late 2010. Since then a series of tests first on the eight individual cavities and then the full cryomodule have been performed. We report on the results of these tests and lessons learned which will have an impact on future module testing at Fermilab.
Powered operation of Cryomodule 1 (CM-1) at the Fermilab SRF Beam Test Facility began in late 2010. Since then a series of tests first on the eight individual cavities and then the full cryomodule have been performed. We report on the results of these tests and lessons learned which will have an impact on future module testing at Fermilab.
△ Less
Submitted 18 September, 2012;
originally announced September 2012.
-
Status and plans for a SRF accelerator test faciliy at Fermilab
Authors:
J. Leibfritz,
R. Andrews,
K. Carlson,
B. Chase,
M. Church,
E. Harms,
A. Klebaner,
M. Kucera,
S. Lackey,
A. Martinez,
S. Nagaitsev,
L. Nobrega,
P. Piot,
J. Reid,
M. Wendt,
S. Wesseln
Abstract:
A superconducting RF accelerator test facility is being constructed at Fermilab. The existing New Muon Lab (NML) building is being converted for this facility. The accelerator will consist of an electron gun, injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, multiple downstream beam lines for testing diagnostics and conducting various beam tests, and a high powe…
▽ More
A superconducting RF accelerator test facility is being constructed at Fermilab. The existing New Muon Lab (NML) building is being converted for this facility. The accelerator will consist of an electron gun, injector, beam acceleration section consisting of 3 TTF-type or ILC-type cryomodules, multiple downstream beam lines for testing diagnostics and conducting various beam tests, and a high power beam dump. When completed, it is envisioned that this facility will initially be capable of generating an 810 MeV electron beam with ILC beam intensity. Expansion plans of the facility are underway that will provide the capability to upgrade the accelerator to a total beam energy of 1.5 GeV. In addition to testing accelerator components, this facility will be used to test RF power equipment, instrumentation, LLRF and controls systems for future SRF accelerators such as the ILC and Project-X. This paper describes the current status and overall plans for this facility.
△ Less
Submitted 17 August, 2012;
originally announced August 2012.
-
Electronic spectroscopy of FUV-irradiated diamondoids: A combined experimental and theoretical study
Authors:
M. Steglich,
F. Huisken,
J. E. Dahl,
R. M. K. Carlson,
Th. Henning
Abstract:
Irradiation with high energy photons (10.2 - 11.8 eV) was applied to small diamondoids isolated in solid rare gas matrices at low temperature. The photoproducts were traced via UV absorption spectroscopy. We found that upon ionization the smallest of these species lose a peripheral H atom to form a stable closed-shell cation. This process is also likely to occur under astrophysical conditions for…
▽ More
Irradiation with high energy photons (10.2 - 11.8 eV) was applied to small diamondoids isolated in solid rare gas matrices at low temperature. The photoproducts were traced via UV absorption spectroscopy. We found that upon ionization the smallest of these species lose a peripheral H atom to form a stable closed-shell cation. This process is also likely to occur under astrophysical conditions for gas phase diamondoids and it opens the possibility to detect diamond-like molecules using their rotational spectrum since the dehydrogenated cations possess strong permanent dipole moments. The lowest-energy electronic features of these species in the UV were found to be rather broad, shifting to longer wavelengths with increasing molecular size. Calculations using time-dependent density functional theory support our experimental findings and extend the absorption curves further into the vacuum ultraviolet. The complete sigma - sigma* spectrum displays surprisingly strong similarities to meteoritic nanodiamonds containing 50 times more C atoms.
△ Less
Submitted 19 April, 2011; v1 submitted 21 January, 2011;
originally announced January 2011.
