-
Nanophotonic oscillators for laser conversion beyond an octave
Authors:
Grant M. Brodnik,
Haixin Liu,
David R. Carlson,
Jennifer A. Black,
Scott B. Papp
Abstract:
Many uses of lasers place the highest importance on access to specific wavelength bands. For example, mobilizing optical-atomic clocks for a leap in sensing requires compact lasers at frequencies spread across the visible and near infrared. Integrated photonics enables high-performance, scalable laser platforms, however, customizing laser-gain media to support wholly new bands is challenging and o…
▽ More
Many uses of lasers place the highest importance on access to specific wavelength bands. For example, mobilizing optical-atomic clocks for a leap in sensing requires compact lasers at frequencies spread across the visible and near infrared. Integrated photonics enables high-performance, scalable laser platforms, however, customizing laser-gain media to support wholly new bands is challenging and often prohibitively mismatched in scalability to early quantum-based sensing and information systems. Here, we demonstrate a microresonator optical-parametric oscillator (OPO) that converts a pump laser to an output wave within a frequency span exceeding an octave. We achieve phase matching for oscillation by nanopatterning the microresonator to open a photonic-crystal bandgap on the mode of the pump laser. By adjusting the nanophotonic pattern and hence the bandgap, the ratio of output OPO wave frequency span to required pump laser tuning is more than 10,000. We also demonstrate tuning the oscillator in free-spectral-range steps, more finely with temperature, and minimal additive frequency noise of the laser-conversion process. Our work shows that nanophotonics offers control of laser conversion in microresonators, bridging phase-matching of nonlinear optics and application requirements for laser designs.
△ Less
Submitted 10 May, 2024;
originally announced May 2024.
-
Laser-power consumption of soliton formation in a bidirectional Kerr resonator
Authors:
Jizhao Zang,
Su-Peng Yu,
Haixin Liu,
Yan Jin,
Travis C. Briles,
David R. Carlson,
Scott B. Papp
Abstract:
Laser sources power extreme data transmission as well as computing acceleration, access to ultrahigh-speed signaling, and sensing for chemicals, distance, and pattern recognition. The ever-growing scale of these applications drives innovation in multi-wavelength lasers for massively parallel processing. We report a nanophotonic Kerr-resonator circuit that consumes the power of an input laser and g…
▽ More
Laser sources power extreme data transmission as well as computing acceleration, access to ultrahigh-speed signaling, and sensing for chemicals, distance, and pattern recognition. The ever-growing scale of these applications drives innovation in multi-wavelength lasers for massively parallel processing. We report a nanophotonic Kerr-resonator circuit that consumes the power of an input laser and generates a soliton frequency comb at approaching unit efficiency. By coupling forward and backward propagation, we realize a bidirectional Kerr resonator that supports universal phase matching but also opens excess loss by double-sided emission. Therefore, we induce reflection of the resonator's forward, external-coupling port to favor backward propagation, resulting in efficient, one-sided soliton formation. Coherent backscattering with nanophotonics provides the control to put arbitrary phase-matching and efficient laser-power consumption on equal footing in Kerr resonators. In the overcoupled-resonator regime, we measure 65% conversion efficiency of a 40 mW input pump laser, and the nonlinear circuit consumes 97% of the pump, generating the maximum possible comb power. Our work opens up high-efficiency soliton formation in integrated photonics, exploring how energy flows in nonlinear circuits and enabling laser sources for advanced transmission, computing, quantum sensing, and artificial-intelligence applications.
△ Less
Submitted 29 January, 2024;
originally announced January 2024.
-
Threshold and laser-conversion in nanostructured-resonator parametric oscillators
Authors:
Haixin Liu,
Grant M. Brodnik,
Jizhao Zang,
David R. Carlson,
Jennifer A. Black,
Scott B. Papp
Abstract:
We explore optical parametric oscillation (OPO) in nanophotonic resonators, enabling arbitrary, nonlinear phase-matching and nearly lossless control of energy conversion. Such pristine OPO laser converters are determined by nonlinear light-matter interactions, making them both technologically flexible and broadly reconfigurable. We utilize a nanostructured inner-wall modulation in the resonator to…
▽ More
We explore optical parametric oscillation (OPO) in nanophotonic resonators, enabling arbitrary, nonlinear phase-matching and nearly lossless control of energy conversion. Such pristine OPO laser converters are determined by nonlinear light-matter interactions, making them both technologically flexible and broadly reconfigurable. We utilize a nanostructured inner-wall modulation in the resonator to achieve universal phase-matching for OPO-laser conversion, but coherent backscattering also induces a counterpropagating pump laser. This depletes the intra-resonator optical power in either direction, increasing the OPO threshold power and limiting laser-conversion efficiency, the ratio of optical power in target signal and idler frequencies to the pump. We develop an analytical model of this system that emphasizes an understanding of optimal laser conversion and threshold behaviors, and we use the model to guide experiments with nanostructured-resonator OPO laser-conversion circuits, fully integrated on chip and unlimited by group-velocity dispersion. Our work demonstrates the fundamental connection between OPO laser-conversion efficiency and the resonator coupling rate, subject to the relative phase and power of counterpropagating pump fields. We achieve $(40\pm4)$ mW of on-chip power, corresponding to $(41\pm4)$% conversion efficiency, and discover a path toward near-unity OPO laser conversion efficiency.
△ Less
Submitted 25 May, 2023;
originally announced May 2023.
-
20 GHz fiber-integrated femtosecond pulse and supercontinuum generation with a resonant electro-optic frequency comb
Authors:
Pooja Sekhar,
Connor Fredrick,
David R. Carlson,
Zachary Newman,
Scott A. Diddams
Abstract:
Frequency combs with mode spacing in the range of 10 to 20 gigahertz (GHz) are critical for increasingly important applications such as astronomical spectrograph calibration, high-speed dual-comb spectroscopy, and low-noise microwave generation. While electro-optic modulators and microresonators can provide narrowband comb sources at this repetition rate, a significant remaining challenge is a mea…
▽ More
Frequency combs with mode spacing in the range of 10 to 20 gigahertz (GHz) are critical for increasingly important applications such as astronomical spectrograph calibration, high-speed dual-comb spectroscopy, and low-noise microwave generation. While electro-optic modulators and microresonators can provide narrowband comb sources at this repetition rate, a significant remaining challenge is a means to produce pulses with sufficient peak power to initiate nonlinear supercontinuum generation spanning hundreds of terahertz (THz) as required for self-referencing in these applications. Here, we provide a simple, robust, and universal solution to this problem using off-the-shelf polarization-maintaining (PM) amplification and nonlinear fiber components. This fiber-integrated approach for nonlinear temporal compression and supercontinuum generation is demonstrated with a resonant electro-optic frequency comb at 1550 nm. We show how to readily achieve pulses shorter than 60 fs at a repetition rate of 20 GHz and with peak powers in excess of 2 kW. The same technique can be applied to picosecond pulses at 10 GHz to demonstrate temporal compression by a factor of 9x yielding 50 fs pulses with peak power of 5.5 kW. These compressed pulses enable flat supercontinuum generation spanning more than 600 nm after propagation through multi-segment dispersion-tailored anomalous-dispersion highly nonlinear fiber (HNLF) or tantala waveguides. The same 10 GHz source can readily achieve an octave-spanning spectrum for self-referencing in dispersion-engineered silicon nitride waveguides. This simple all-fiber approach to nonlinear spectral broadening fills a critical gap for transforming any narrowband 10 to 20 GHz frequency comb into a broadband spectrum for a wide range of applications that benefit from the high pulse rate and require access to the individual comb modes.
△ Less
Submitted 20 March, 2023;
originally announced March 2023.
-
Tailoring microcombs with inverse-designed, meta-dispersion microresonators
Authors:
Erwan Lucas,
Su-Peng Yu,
Travis C. Briles,
David R. Carlson,
Scott B. Papp
Abstract:
Nonlinear-wave mixing in optical microresonators offers new perspectives to generate compact optical-frequency microcombs, which enable an ever-growing number of applications. Microcombs exhibit a spectral profile that is primarily determined by their microresonator's dispersion; an example is the $ \operatorname{sech}^2 $ spectrum of dissipative Kerr solitons under anomalous group-velocity disper…
▽ More
Nonlinear-wave mixing in optical microresonators offers new perspectives to generate compact optical-frequency microcombs, which enable an ever-growing number of applications. Microcombs exhibit a spectral profile that is primarily determined by their microresonator's dispersion; an example is the $ \operatorname{sech}^2 $ spectrum of dissipative Kerr solitons under anomalous group-velocity dispersion. Here, we introduce an inverse-design approach to spectrally shape microcombs, by optimizing an arbitrary meta-dispersion in a resonator. By incorporating the system's governing equation into a genetic algorithm, we are able to efficiently identify a dispersion profile that produces a microcomb closely matching a user-defined target spectrum, such as spectrally-flat combs or near-Gaussian pulses. We show a concrete implementation of these intricate optimized dispersion profiles, using selective bidirectional-mode hybridization in photonic-crystal resonators. Moreover, we fabricate and explore several microcomb generators with such flexible `meta' dispersion control. Their dispersion is not only controlled by the waveguide composing the resonator, but also by a corrugation inside the resonator, which geometrically controls the spectral distribution of the bidirectional coupling in the resonator. This approach provides programmable mode-by-mode frequency splitting and thus greatly increases the design space for controlling the nonlinear dynamics of optical states such as Kerr solitons.
△ Less
Submitted 5 July, 2023; v1 submitted 21 September, 2022;
originally announced September 2022.
-
Tunable lasers with optical-parametric oscillation in photonic-crystal resonators
Authors:
Jennifer A. Black,
Grant Brodnik,
Haixin Liu,
Su-Peng Yu,
David R. Carlson,
Jizhao Zang,
Travis C. Briles,
Scott B. Papp
Abstract:
By design access to laser wavelength, especially with integrated photonics, is critical to advance quantum sensors like optical clocks and quantum-information systems, and open opportunities in optical communication. Semiconductor-laser gain provides exemplary efficiency and integration but merely in developed wavelength bands. Alternatively, nonlinear optics requires control of phase matching, bu…
▽ More
By design access to laser wavelength, especially with integrated photonics, is critical to advance quantum sensors like optical clocks and quantum-information systems, and open opportunities in optical communication. Semiconductor-laser gain provides exemplary efficiency and integration but merely in developed wavelength bands. Alternatively, nonlinear optics requires control of phase matching, but the principle of nonlinear conversion of a pump laser to a designed wavelength is extensible. We report on laser-wavelength access by versatile customization of optical-parametric oscillation (OPO) with a photonic-crystal resonator (PhCR). By controlling the bandgap of a PhCR, we enable OPO generation across a wavelength range of 1234-2093 nm with a 1550 nm pump and 1016-1110 nm with a 1064 nm pump. Moreover, our tunable laser platform offers pump-to-sideband conversion efficiency of >10% and negligible additive optical-frequency noise across the output range. From laser design to simulation of nonlinear dynamics, we use a Lugiato-Lefever framework that predicts the system characteristics, including bi-directional OPO generation in the PhCR and conversion efficiency in agreement with our observations. Our experiments introduce tunable lasers by design with PhCR OPOs, providing critical functionalities in integrated photonics.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Nanodiamond grain boundaries and lattice expansion drive Silicon vacancy emission heterogeneity
Authors:
Daniel K. Angell,
Shuo Li,
Hendrik Utzat,
Matti L. S. Thurston,
Yin Liu,
Jeremy Dahl,
Robert Carlson,
Zhi-Xun Shen,
Robert Sinclair,
Nicholas Melosh,
Jennifer A. Dionne
Abstract:
Silicon-vacancy (SiV$^-$) centers in diamond are promising candidates as sources of single-photons in quantum networks due to their minimal phonon coupling and narrow optical linewidths. Correlating SiV$^-$ emission with the defect's atomic-scale structure is important for controlling and optimizing quantum emission, but remains an outstanding challenge. Here, we use cathodoluminescence imaging in…
▽ More
Silicon-vacancy (SiV$^-$) centers in diamond are promising candidates as sources of single-photons in quantum networks due to their minimal phonon coupling and narrow optical linewidths. Correlating SiV$^-$ emission with the defect's atomic-scale structure is important for controlling and optimizing quantum emission, but remains an outstanding challenge. Here, we use cathodoluminescence imaging in a scanning transmission electron microscope (STEM) to elucidate the structural sources of non-ideality in the SiV$^-$ emission from nanodiamonds with sub-nanometer-scale resolution. We show that different crystalline domains of a nanodiamond exhibit distinct zero-phonon line (ZPL) energies and differences in brightness, while near-surface SiV$^-$ emitters remain bright. We correlate these changes with local lattice expansion using 4D STEM and diffraction, and show that associated blue shifts from the ZPL are due to defect density heterogeneity, while red shifts are due to lattice distortions.
△ Less
Submitted 16 February, 2022;
originally announced February 2022.
-
Optical synthesis by spectral translation
Authors:
Jennifer A. Black,
Zachary L. Newman,
Su-Peng Yu,
David R. Carlson,
Scott B. Papp
Abstract:
Optical-frequency synthesizers are lasers stabilized and programmed from a microwave clock for applications, especially in fundamental measurements and spectroscopy, optical-communication links, and precision sensing of numerous physical effects. In a synthesizer, a frequency comb provides a reference grid across a broad spectrum and a frequency-tunable laser accomplishes synthesis by phase-lock t…
▽ More
Optical-frequency synthesizers are lasers stabilized and programmed from a microwave clock for applications, especially in fundamental measurements and spectroscopy, optical-communication links, and precision sensing of numerous physical effects. In a synthesizer, a frequency comb provides a reference grid across a broad spectrum and a frequency-tunable laser accomplishes synthesis by phase-lock to the comb. Optical synthesizers have matured to chip-scale with integrated photonics, however, the tunable laser and frequency comb fundamentally constrain the tuning range. Here, we present an optical synthesizer based on four-wave mixing (FWM) spectral translation of a tunable laser and a frequency comb. We implement both the spectral translation and the frequency comb by use of advanced microresonators. The intrinsic energy conservation of FWM ensures deterministic optical synthesis, and it allows a nearly arbitrary frequency tuning range by the dependence of resonant FWM on group-velocity dispersion, temperature, and tunable laser frequency. Moreover, we take advantage of highly efficient parametric amplification associated with spectral translation. We operate spectral translation across output ranges up to 200 THz, and we characterize it through ultraprecise optical-frequency metrology, demonstrating <0.1 Hz absolute accuracy and a fractional frequency precision of 4.7x10^(-13) in 1 s measurements. Our experiments introduce integrated-nonlinear-photonic circuits that enable complex intrinsic functionalities, such as our approach to optical-frequency synthesis with nearly limitless bandwidth.
△ Less
Submitted 28 December, 2021;
originally announced December 2021.
-
Group-velocity dispersion engineering of tantala integrated photonics
Authors:
Jennifer A. Black,
Richelle Streater,
Kieran F. Lamee,
David R. Carlson,
Su-Peng Yu,
Scott B. Papp
Abstract:
Designing integrated photonics, especially to leverage Kerr-nonlinear optics, requires accurate and precise knowledge of refractive index across the visible to infrared spectral ranges. Tantala (Ta_2O_5) is an emerging material platform for integrated photonics and nanophotonics that offers broadband ultralow loss, moderately high nonlinearity, and advantages for scalable and heterogeneous integra…
▽ More
Designing integrated photonics, especially to leverage Kerr-nonlinear optics, requires accurate and precise knowledge of refractive index across the visible to infrared spectral ranges. Tantala (Ta_2O_5) is an emerging material platform for integrated photonics and nanophotonics that offers broadband ultralow loss, moderately high nonlinearity, and advantages for scalable and heterogeneous integration. We present refractive-index measurements on a thin film of tantala, and we explore the efficacy of this data for group-velocity dispersion (GVD) engineering with waveguide and ring-resonator devices. In particular, the observed spectral extent of supercontinuum generation in fabricated waveguides, and the wavelength dependence of free spectral range (FSR) in optical resonators provide a sensitive test of our integrated-photonics design process. Our work opens up new design possibilities with tantala, including with octave-spanning soliton microcombs.
△ Less
Submitted 29 September, 2020;
originally announced September 2020.
-
Tantala Kerr-nonlinear integrated photonics
Authors:
Hojoong Jung,
Su-Peng Yu,
David R. Carlson,
Tara E. Drake,
Travis C. Briles,
Scott B. Papp
Abstract:
Integrated photonics plays a central role in modern science and technology, enabling experiments from nonlinear science to quantum information, ultraprecise measurements and sensing, and advanced applications like data communication and signal processing. Optical materials with favorable properties are essential for nanofabrication of integrated-photonics devices. Here we describe a material for i…
▽ More
Integrated photonics plays a central role in modern science and technology, enabling experiments from nonlinear science to quantum information, ultraprecise measurements and sensing, and advanced applications like data communication and signal processing. Optical materials with favorable properties are essential for nanofabrication of integrated-photonics devices. Here we describe a material for integrated nonlinear photonics, tantalum pentoxide (Ta$_2$O$_5$, hereafter tantala), which offers low intrinsic material stress, low optical loss, and efficient access to Kerr-nonlinear processes. We utilize >800-nm thick tantala films deposited via ion-beam sputtering on oxidized silicon wafers. The tantala films contain a low residual tensile stress of 38 MPa, and they offer a Kerr index $n_2$=6.2(23)$\times10^{-19}$ m$^2$/W, which is approximately a factor of three higher than silicon nitride. We fabricate integrated nonlinear resonators and waveguides without the cracking challenges that are prevalent in stoichiometric silicon nitride. The tantala resonators feature an optical quality factor up to $3.8\times10^6$, which enables us to generate ultrabroad-bandwidth Kerr-soliton frequency combs with low threshold power. Moreover, tantala waveguides enable supercontinuum generation across the near-infrared from low-energy, ultrafast seed pulses. Our work introduces a versatile material platform for integrated, low-loss nanophotonics that can be broadly applied and enable heterogeneous integration.
△ Less
Submitted 25 July, 2020;
originally announced July 2020.
-
Generating few-cycle pulses with integrated nonlinear photonics
Authors:
David R. Carlson,
Phillips Hutchison,
Daniel D. Hickstein,
Scott B. Papp
Abstract:
Ultrashort laser pulses that last only a few optical cycles have been transformative tools for studying and manipulating light--matter interactions. Few-cycle pulses are typically produced from high-peak-power lasers, either directly from a laser oscillator, or through nonlinear effects in bulk or fiber materials. Now, an opportunity exists to explore the few-cycle regime with the emergence of ful…
▽ More
Ultrashort laser pulses that last only a few optical cycles have been transformative tools for studying and manipulating light--matter interactions. Few-cycle pulses are typically produced from high-peak-power lasers, either directly from a laser oscillator, or through nonlinear effects in bulk or fiber materials. Now, an opportunity exists to explore the few-cycle regime with the emergence of fully integrated nonlinear photonics. Here, we experimentally and numerically demonstrate how lithographically patterned waveguides can be used to generate few-cycle laser pulses from an input seed pulse. Moreover, our work explores a design principle in which lithographically varying the group-velocity dispersion in a waveguide enables the creation of highly constant-intensity supercontinuum spectra across an octave of bandwidth. An integrated source of few-cycle pulses could broaden the range of applications for ultrafast light sources, including supporting new lab-on-a-chip systems in a scalable form factor.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Stellar Spectroscopy in the Near-infrared with a Laser Frequency Comb
Authors:
Andrew J. Metcalf,
Tyler Anderson,
Chad F. Bender,
Scott Blakeslee,
Wesley Brand,
David R. Carlson,
William D. Cochran,
Scott A. Diddams,
Michael Endl,
Connor Fredrick,
Sam Halverson,
Dan D. Hickstein,
Fred Hearty,
Jeff Jennings,
Shubham Kanodia,
Kyle F. Kaplan,
Eric Levi,
Emily Lubar,
Suvrath Mahadevan,
Andrew Monson,
Joe P. Ninan,
Colin Nitroy,
Steve Osterman,
Scott B. Papp,
Franklyn Quinlan
, et al. (12 additional authors not shown)
Abstract:
The discovery and characterization of exoplanets around nearby stars is driven by profound scientific questions about the uniqueness of Earth and our Solar System, and the conditions under which life could exist elsewhere in our Galaxy. Doppler spectroscopy, or the radial velocity (RV) technique, has been used extensively to identify hundreds of exoplanets, but with notable challenges in detecting…
▽ More
The discovery and characterization of exoplanets around nearby stars is driven by profound scientific questions about the uniqueness of Earth and our Solar System, and the conditions under which life could exist elsewhere in our Galaxy. Doppler spectroscopy, or the radial velocity (RV) technique, has been used extensively to identify hundreds of exoplanets, but with notable challenges in detecting terrestrial mass planets orbiting within habitable zones. We describe infrared RV spectroscopy at the 10 m Hobby-Eberly telescope that leverages a 30 GHz electro-optic laser frequency comb with nanophotonic supercontinuum to calibrate the Habitable Zone Planet Finder spectrograph. Demonstrated instrument precision <10 cm/s and stellar RVs approaching 1 m/s open the path to discovery and confirmation of habitable zone planets around M-dwarfs, the most ubiquitous type of stars in our Galaxy.
△ Less
Submitted 1 February, 2019;
originally announced February 2019.
-
Dual-comb spectroscopy with tailored spectral broadening in Si$_3$N$_4$ nanophotonics
Authors:
Esther Baumann,
Eli V. Hoenig,
Edgar F. Perez,
Gabriel M. Colacion,
Fabrizio R. Giorgetta,
Kevin C. Cossel,
Gabriel Ycas,
David R. Carlson,
Daniel D. Hickstein,
Kartik Srinivasan,
Scott B. Papp,
Nathan R. Newbury,
Ian Coddington
Abstract:
Si$_3$N$_4$ waveguides, pumped at 1550 nm, can provide spectrally smooth, broadband light for gas spectroscopy in the important 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m atmospheric water window, which is only partially accessible with silica-fiber based systems. By combining Er+:fiber frequency combs and supercontinuum generation in tailored Si$_3$N$_4$ waveguides, high signal-to-noise dual-comb spect…
▽ More
Si$_3$N$_4$ waveguides, pumped at 1550 nm, can provide spectrally smooth, broadband light for gas spectroscopy in the important 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m atmospheric water window, which is only partially accessible with silica-fiber based systems. By combining Er+:fiber frequency combs and supercontinuum generation in tailored Si$_3$N$_4$ waveguides, high signal-to-noise dual-comb spectroscopy (DCS) spanning 2 ${\mathrmμ}$m to 2.5 ${\mathrmμ}$m is demonstrated. Acquired broadband dual-comb spectra of CO and CO$_2$ agree well with database line shape models and have a spectral-signal-to-noise as high as 48$/\sqrt{\mathrm{s}}$, showing that the high coherence between the two combs is retained in the Si$_3$N$_4$ supercontinuum generation. The DCS figure of merit is 6$\times 10^6/\sqrt{\mathrm{s}}$, equivalent to that of all-fiber DCS systems in the 1.6 ${\mathrmμ}$m band. Based on these results, future DCS can combine fiber comb technology with Si$_3$N$_4$ waveguides to access new spectral windows in a robust non-laboratory platform.
△ Less
Submitted 14 November, 2018;
originally announced November 2018.
-
A Kerr-microresonator optical clockwork
Authors:
Tara E. Drake,
Travis C. Briles,
Daryl T. Spencer,
Jordan R. Stone,
David R. Carlson,
Daniel D. Hickstein,
Qing Li,
Daron Westly,
Kartik Srinivasan,
Scott A. Diddams,
Scott B. Papp
Abstract:
Kerr microresonators generate interesting and useful fundamental states of electromagnetic radiation through nonlinear interactions of continuous-wave (CW) laser light. Using photonic-integration techniques, functional devices with low noise, small size, low-power consumption, scalable fabrication, and heterogeneous combinations of photonics and electronics can be realized. Kerr solitons, which st…
▽ More
Kerr microresonators generate interesting and useful fundamental states of electromagnetic radiation through nonlinear interactions of continuous-wave (CW) laser light. Using photonic-integration techniques, functional devices with low noise, small size, low-power consumption, scalable fabrication, and heterogeneous combinations of photonics and electronics can be realized. Kerr solitons, which stably circulate in a Kerr microresonator, have emerged as a source of coherent, ultrafast pulse trains and ultra-broadband optical-frequency combs. Using the f-2f technique, Kerr combs support carrier-envelope-offset phase stabilization for optical synthesis and metrology. In this paper, we introduce a Kerr-microresonator optical clockwork based on optical-frequency division (OFD), which is a powerful technique to transfer the fractional-frequency stability of an optical clock to a lower frequency electronic clock signal. The clockwork presented here is based on a silicon-nitride (Si$_3$N$_4$) microresonator that supports an optical-frequency comb composed of soliton pulses at 1 THz repetition rate. By electro-optic phase modulation of the entire Si$_3$N$_4$ comb, we arbitrarily generate additional CW modes between the Si$_3$N$_4$ comb modes; operationally, this reduces the pulse train repetition frequency and can be used to implement OFD to the microwave domain. Our experiments characterize the residual frequency noise of this Kerr-microresonator clockwork to one part in $10^{17}$, which opens the possibility of using Kerr combs with high performance optical clocks. In addition, the photonic integration and 1 THz resolution of the Si$_3$N$_4$ frequency comb makes it appealing for broadband, low-resolution liquid-phase absorption spectroscopy, which we demonstrate with near infrared measurements of water, lipids, and organic solvents.
△ Less
Submitted 1 November, 2018;
originally announced November 2018.
-
Self-organized nonlinear gratings for ultrafast nanophotonics
Authors:
Daniel D. Hickstein,
David R. Carlson,
Haridas Mundoor,
Jacob B. Khurgin,
Kartik Srinivasan,
Daron Westly,
Abijith Kowligy,
Ivan Smalyukh,
Scott A. Diddams,
Scott B. Papp
Abstract:
Modern nonlinear optical materials allow light of one wavelength be efficiently converted into light at another wavelength. However, designing nonlinear optical materials to operate with ultrashort pulses is difficult, because it is necessary to match both the phase velocities and group velocities of the light. Here we show that self-organized nonlinear gratings can be formed with femtosecond puls…
▽ More
Modern nonlinear optical materials allow light of one wavelength be efficiently converted into light at another wavelength. However, designing nonlinear optical materials to operate with ultrashort pulses is difficult, because it is necessary to match both the phase velocities and group velocities of the light. Here we show that self-organized nonlinear gratings can be formed with femtosecond pulses propagating through nanophotonic waveguides, providing simultaneous group-velocity matching and quasi-phase-matching for second harmonic generation. We record the first direct microscopy images of photo-induced nonlinear gratings, and demonstrate how these waveguides enable simultaneous $χ^{(2)}$ and $χ^{(3)}$ nonlinear processes, which we utilize to stabilize a laser frequency comb. Finally, we derive the equations that govern self-organized grating formation for femtosecond pulses and explain the crucial role of group-velocity matching. In the future, such nanophotonic waveguides could enable scalable, reconfigurable nonlinear optical systems.
△ Less
Submitted 20 June, 2018;
originally announced June 2018.
-
Dual-comb interferometry via repetition-rate switching of a single frequency comb
Authors:
David R. Carlson,
Daniel D. Hickstein,
Daniel C. Cole,
Scott A. Diddams,
Scott B. Papp
Abstract:
We experimentally demonstrate a versatile technique for performing dual-comb interferometry using a single frequency comb. By rapid switching of the repetition rate, the output pulse train can be delayed and heterodyned with itself to produce interferograms. The full speed and resolution of standard dual-comb interferometry is preserved while simultaneously offering a significant experimental simp…
▽ More
We experimentally demonstrate a versatile technique for performing dual-comb interferometry using a single frequency comb. By rapid switching of the repetition rate, the output pulse train can be delayed and heterodyned with itself to produce interferograms. The full speed and resolution of standard dual-comb interferometry is preserved while simultaneously offering a significant experimental simplification and cost savings. We show that this approach is particularly suited for absolute distance metrology due to an extension of the non-ambiguity range as a result of the continuous repetition-rate switching.
△ Less
Submitted 13 June, 2018;
originally announced June 2018.
-
Fully self-referenced frequency comb consuming 5 Watts of electrical power
Authors:
Paritosh Manurkar,
Edgar F. Perez,
Daniel D. Hickstein,
David R. Carlson,
Jeff Chiles,
Daron A. Westly,
Esther Baumann,
Scott A. Diddams,
Nathan R. Newbury,
Kartik Srinivasan,
Scott B. Papp,
Ian Coddington
Abstract:
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon nitride waveguide, which requires much lower pulse energies (~200 pJ) than with highly nonlinear fiber. These low-energy pulses are achieved with an erbium fibe…
▽ More
We present a hybrid fiber/waveguide design for a 100-MHz frequency comb that is fully self-referenced and temperature controlled with less than 5 W of electrical power. Self-referencing is achieved by supercontinuum generation in a silicon nitride waveguide, which requires much lower pulse energies (~200 pJ) than with highly nonlinear fiber. These low-energy pulses are achieved with an erbium fiber oscillator/amplifier pumped by two 250-mW passively-cooled pump diodes that consume less than 5 W of electrical power. The temperature tuning of the oscillator, necessary to stabilize the repetition rate in the presence of environmental temperature changes, is achieved by resistive heating of a section of gold-palladium-coated fiber within the laser cavity. By heating only the small thermal mass of the fiber, the repetition rate is tuned over 4.2 kHz (corresponding to an effective temperature change of 4.2 °C) with a fast time constant of 0.5 s, at a low power consumption of 0.077 W/°C, compared to 2.5 W/°C in the conventional 200-MHz comb design.
△ Less
Submitted 18 September, 2018; v1 submitted 7 February, 2018;
originally announced February 2018.
-
Mid-infrared frequency comb generation via cascaded quadratic nonlinearities in quasi-phase-matched waveguides
Authors:
Abijith S. Kowligy,
Alex Lind,
Daniel D. Hickstein,
David R. Carlson,
Henry Timmers,
Nima Nader,
Flavio C. Cruz,
Gabriel Ycas,
Scott B. Papp,
Scott A. Diddams
Abstract:
We experimentally demonstrate a simple configuration for mid-infrared (MIR) frequency comb generation in quasi-phase-matched lithium niobate waveguides using the cascaded-$χ^{(2)}$ nonlinearity. With nanojoule-scale pulses from an Er:fiber laser, we observe octave-spanning supercontinuum in the near-infrared with dispersive-wave generation in the 2.5--3 $\textμ$m region and intra-pulse difference-…
▽ More
We experimentally demonstrate a simple configuration for mid-infrared (MIR) frequency comb generation in quasi-phase-matched lithium niobate waveguides using the cascaded-$χ^{(2)}$ nonlinearity. With nanojoule-scale pulses from an Er:fiber laser, we observe octave-spanning supercontinuum in the near-infrared with dispersive-wave generation in the 2.5--3 $\textμ$m region and intra-pulse difference-frequency generation in the 4--5 $\textμ$m region. By engineering the quasi-phase-matched grating profiles, tunable, narrow-band MIR and broadband MIR spectra are both observed in this geometry. Finally, we perform numerical modeling using a nonlinear envelope equation, which shows good quantitative agreement with the experiment---and can be used to inform waveguide designs to tailor the MIR frequency combs. Our results identify a path to a simple single-branch approach to mid-infrared frequency comb generation in a compact platform using commercial Er:fiber technology.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
An ultrafast electro-optic light source with sub-cycle precision
Authors:
David R. Carlson,
Daniel D. Hickstein,
Wei Zhang,
Andrew J. Metcalf,
Franklyn Quinlan,
Scott A. Diddams,
Scott B. Papp
Abstract:
Controlling femtosecond optical pulses with temporal precision better than one cycle of the carrier field has a profound impact on measuring and manipulating interactions between light and matter. We explore pulses that are carved from a continuous-wave laser via electro-optic modulation and realize the regime of sub-cycle optical control without a mode-locked resonator. Our ultrafast source, with…
▽ More
Controlling femtosecond optical pulses with temporal precision better than one cycle of the carrier field has a profound impact on measuring and manipulating interactions between light and matter. We explore pulses that are carved from a continuous-wave laser via electro-optic modulation and realize the regime of sub-cycle optical control without a mode-locked resonator. Our ultrafast source, with a repetition rate of 10 GHz, is derived from an optical-cavity-stabilized laser and a microwave-cavity-stabilized electronic oscillator. Sub-cycle timing jitter of the pulse train is achieved by coherently linking the laser and oscillator through carrier-envelope phase stabilization enabled by a photonic-chip supercontinuum that spans up to 1.9 octaves across the near infrared. Moreover, the techniques we report are relevant for other ultrafast lasers with repetition rates up to 30 GHz and may allow stable few-cycle pulses to be produced by a wider range of sources.
△ Less
Submitted 22 November, 2017;
originally announced November 2017.
-
Quasi-phase-matched supercontinuum-generation in photonic waveguides
Authors:
Daniel D. Hickstein,
Grace C. Kerber,
David R. Carlson,
Lin Chang,
Daron Westly,
Kartik Srinivasan,
Abijith Kowligy,
John E. Bowers,
Scott A. Diddams,
Scott B. Papp
Abstract:
Supercontinuum generation in integrated photonic waveguides is a versatile source of broadband light, and the generated spectrum is largely determined by the phase-matching conditions. Here we show that quasi-phase-matching via periodic modulations of the waveguide structure provides a useful mechanism to control the evolution of ultrafast pulses and the supercontinuum spectrum. We experimentally…
▽ More
Supercontinuum generation in integrated photonic waveguides is a versatile source of broadband light, and the generated spectrum is largely determined by the phase-matching conditions. Here we show that quasi-phase-matching via periodic modulations of the waveguide structure provides a useful mechanism to control the evolution of ultrafast pulses and the supercontinuum spectrum. We experimentally demonstrate quasi-phase-matched supercontinuum to the TE20 and TE00 waveguide modes, which enhances the intensity of the SCG in specific spectral regions by as much as 20 dB. We utilize higher-order quasi-phase-matching (up to the 16th order) to enhance the intensity in numerous locations across the spectrum. Quasi-phase-matching adds a unique dimension to the design-space for SCG waveguides, allowing the spectrum to be engineered for specific applications.
△ Less
Submitted 7 December, 2017; v1 submitted 10 October, 2017;
originally announced October 2017.
-
Optical-frequency measurements with a Kerr-microcomb and photonic-chip supercontinuum
Authors:
Erin S. Lamb,
David R. Carlson,
Daniel D. Hickstein,
Jordan R. Stone,
Scott A. Diddams,
Scott B. Papp
Abstract:
Dissipative solitons formed in Kerr microresonators may enable chip-scale frequency combs for precision optical metrology. Here we explore the creation of an octave-spanning, 15-GHz repetition-rate microcomb suitable for both f-2f self-referencing and optical-frequency comparisons across the near infrared. This is achieved through a simple and reliable approach to deterministically generate, and s…
▽ More
Dissipative solitons formed in Kerr microresonators may enable chip-scale frequency combs for precision optical metrology. Here we explore the creation of an octave-spanning, 15-GHz repetition-rate microcomb suitable for both f-2f self-referencing and optical-frequency comparisons across the near infrared. This is achieved through a simple and reliable approach to deterministically generate, and subsequently frequency stabilize, soliton pulse trains in a silica-disk resonator. Efficient silicon-nitride waveguides provide a supercontinuum spanning 700 to 2100 nm, enabling both offset-frequency stabilization and optical-frequency measurements with >100 nW per mode. We demonstrate the stabilized comb by performing a microcomb-mediated comparison of two ultrastable optical-reference cavities.
△ Less
Submitted 8 October, 2017;
originally announced October 2017.
-
High-harmonic generation in periodically poled waveguides
Authors:
Daniel D. Hickstein,
David R. Carlson,
Abijith Kowligy,
Matt Kirchner,
Scott R. Domingue,
Nima Nader,
Henry Timmers,
Alex Lind,
Gabriel G. Ycas,
Margaret M. Murnane,
Henry C. Kapteyn,
Scott B. Papp,
Scott A. Diddams
Abstract:
Optical waveguides made from periodically poled materials provide high confinement of light and enable the generation of new wavelengths via quasi-phase-matching, making them a key platform for nonlinear optics and photonics. However, such devices are not typically employed for high-harmonic generation. Here, using 200-fs, 10-nJ-level pulses of 4100 nm light at 1 MHz, we generate high harmonics up…
▽ More
Optical waveguides made from periodically poled materials provide high confinement of light and enable the generation of new wavelengths via quasi-phase-matching, making them a key platform for nonlinear optics and photonics. However, such devices are not typically employed for high-harmonic generation. Here, using 200-fs, 10-nJ-level pulses of 4100 nm light at 1 MHz, we generate high harmonics up to the 13th harmonic (315 nm) in a chirped, periodically poled lithium niobate (PPLN) waveguide. Total conversion efficiencies into the visible--ultraviolet region are as high as 10 percent. We find that the output spectrum depends on the waveguide poling period, indicating that quasi-phase-matching plays a significant role. In the future, such periodically poled waveguides may enable compact sources of ultrashort pulses at high repetition rates and provide new methods of probing the electronic structure of solid-state materials.
△ Less
Submitted 28 August, 2017; v1 submitted 22 August, 2017;
originally announced August 2017.
-
Self-referenced frequency combs using high-efficiency silicon-nitride waveguides
Authors:
David R. Carlson,
Daniel D. Hickstein,
Alex Lind,
Stefan Droste,
Daron Westly,
Nima Nader,
Ian Coddington,
Nathan R. Newbury,
Kartik Srinivasan,
Scott A. Diddams,
Scott B. Papp
Abstract:
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octave…
▽ More
We utilize silicon-nitride waveguides to self-reference a telecom-wavelength fiber frequency comb through supercontinuum generation, using 11.3 mW of optical power incident on the chip. This is approximately ten times lower than conventional approaches using nonlinear fibers and is enabled by low-loss (<2 dB) input coupling and the high nonlinearity of silicon nitride, which can provide two octaves of spectral broadening with incident energies of only 110 pJ. Following supercontinuum generation, self-referencing is accomplished by mixing 780-nm dispersive-wave light with the frequency-doubled output of the fiber laser. In addition, at higher optical powers, we demonstrate f-to-3f self-referencing directly from the waveguide output by the interference of simultaneous supercontinuum and third harmonic generation, without the use of an external doubling crystal or interferometer. These hybrid comb systems combine the performance of fiber-laser frequency combs with the high nonlinearity and compactness of photonic waveguides, and should lead to low-cost, fully stabilized frequency combs for portable and space-borne applications.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Ultrabroadband supercontinuum generation and frequency-comb stabilization using on-chip waveguides with both cubic and quadratic nonlinearities
Authors:
Daniel D. Hickstein,
Hojoong Jung,
David R. Carlson,
Alex Lind,
Ian Coddington,
Kartik Srinivasan,
Gabriel G. Ycas,
Daniel C. Cole,
Abijith Kowligy,
Connor Fredrick,
Stefan Droste,
Erin S. Lamb,
Nathan R. Newbury,
Hong X. Tang,
Scott A. Diddams,
Scott B. Papp
Abstract:
Using aluminum-nitride photonic-chip waveguides, we generate optical-frequency-comb supercontinuum spanning from 500 nm to 4000 nm with a 0.8 nJ seed pulse, and show that the spectrum can be tailored by changing the waveguide geometry. Since aluminum nitride exhibits both quadratic and cubic nonlinearities, the spectra feature simultaneous contributions from numerous nonlinear mechanisms: supercon…
▽ More
Using aluminum-nitride photonic-chip waveguides, we generate optical-frequency-comb supercontinuum spanning from 500 nm to 4000 nm with a 0.8 nJ seed pulse, and show that the spectrum can be tailored by changing the waveguide geometry. Since aluminum nitride exhibits both quadratic and cubic nonlinearities, the spectra feature simultaneous contributions from numerous nonlinear mechanisms: supercontinuum generation, difference-frequency generation, second-harmonic generation, and third-harmonic generation. As one application of integrating multiple nonlinear processes, we measure and stabilize the carrier-envelope-offset frequency of a laser comb by direct photodetection of the output light. Additionally, we generate ~0.3 mW in the 3000 nm to 4000 nm region, which is potentially useful for molecular spectroscopy. The combination of broadband light generation from the visible through the mid-infrared, combined with simplified self-referencing, provides a path towards robust comb systems for spectroscopy and metrology in the field.
△ Less
Submitted 12 April, 2017;
originally announced April 2017.
-
Tracing Electron Beams in the Sun's Corona with Radio Dynamic Imaging Spectroscopy
Authors:
Bin Chen,
Timothy S. Bastian,
Stephen M. White,
Dale E. Gary,
Richard A. Perley,
Michael P. Rupen,
Brent R. Carlson
Abstract:
We report observations of type III radio bursts at decimeter wavelengths (type IIIdm bursts) -- signatures of suprathermal electron beams propagating in the low corona -- using the new technique of radio dynamic imaging spectroscopy provided by the recently upgraded Karl G. Jansky Very Large Array (VLA). For the first time, type IIIdm bursts were imaged with high time and frequency resolution over…
▽ More
We report observations of type III radio bursts at decimeter wavelengths (type IIIdm bursts) -- signatures of suprathermal electron beams propagating in the low corona -- using the new technique of radio dynamic imaging spectroscopy provided by the recently upgraded Karl G. Jansky Very Large Array (VLA). For the first time, type IIIdm bursts were imaged with high time and frequency resolution over a broad frequency band, allowing electron beam trajectories in the corona to be deduced. Together with simultaneous hard X-ray (HXR) and extreme ultraviolet (EUV) observations, we show these beams emanate from an energy release site located in the low corona at a height below ~15 Mm, and propagate along a bundle of discrete magnetic loops upward into the corona. Our observations enable direct measurements of the plasma density along the magnetic loops, and allow us to constrain the diameter of these loops to be less than 100 km. These over-dense and ultra-thin loops reveal the fundamentally fibrous structure of the Sun's corona. The impulsive nature of the electron beams, their accessibility to different magnetic field lines, and the detailed structure of the magnetic release site revealed by the radio observations indicate that the localized energy release is highly fragmentary in time and space, supporting a bursty reconnection model that involves secondary magnetic structures for magnetic energy release and particle acceleration.
△ Less
Submitted 18 December, 2012; v1 submitted 13 November, 2012;
originally announced November 2012.
-
Space-time resolved simulation of femtosecond nonlinear light-matter interactions using a holistic quantum atomic model: Application to near-threshold harmonics
Authors:
M. Kolesik,
E. M. Wright,
J. Andreasen,
J. M. Brown,
D. R. Carlson,
R. J. Jones
Abstract:
We introduce a new computational approach for femtosecond pulse propagation in the transparency region of gases that permits full resolution in three space dimensions plus time while fully incorporating quantum coherent effects such as high-harmonic generation and strong-field ionization in a holistic fashion. This is achieved by utilizing a one-dimensional model atom with a delta-function potenti…
▽ More
We introduce a new computational approach for femtosecond pulse propagation in the transparency region of gases that permits full resolution in three space dimensions plus time while fully incorporating quantum coherent effects such as high-harmonic generation and strong-field ionization in a holistic fashion. This is achieved by utilizing a one-dimensional model atom with a delta-function potential which allows for a closed-form solution for the nonlinear optical response due to ground-state to continuum transitions. It side-steps evaluation of the wave function, and offers more than one hundred-fold reduction in computation time in comparison to direct solution of the atomic Schrödinger equation. To illustrate the capability of our new computational approach, we apply it to the example of near-threshold harmonic generation in Xenon, and we also present a qualitative comparison between our model and results from an in-house experiment on extreme ultraviolet generation in a femtosecond enhancement cavity.
△ Less
Submitted 29 June, 2012;
originally announced June 2012.
-
Electronic spectroscopy of FUV-irradiated diamondoids: A combined experimental and theoretical study
Authors:
M. Steglich,
F. Huisken,
J. E. Dahl,
R. M. K. Carlson,
Th. Henning
Abstract:
Irradiation with high energy photons (10.2 - 11.8 eV) was applied to small diamondoids isolated in solid rare gas matrices at low temperature. The photoproducts were traced via UV absorption spectroscopy. We found that upon ionization the smallest of these species lose a peripheral H atom to form a stable closed-shell cation. This process is also likely to occur under astrophysical conditions for…
▽ More
Irradiation with high energy photons (10.2 - 11.8 eV) was applied to small diamondoids isolated in solid rare gas matrices at low temperature. The photoproducts were traced via UV absorption spectroscopy. We found that upon ionization the smallest of these species lose a peripheral H atom to form a stable closed-shell cation. This process is also likely to occur under astrophysical conditions for gas phase diamondoids and it opens the possibility to detect diamond-like molecules using their rotational spectrum since the dehydrogenated cations possess strong permanent dipole moments. The lowest-energy electronic features of these species in the UV were found to be rather broad, shifting to longer wavelengths with increasing molecular size. Calculations using time-dependent density functional theory support our experimental findings and extend the absorption curves further into the vacuum ultraviolet. The complete sigma - sigma* spectrum displays surprisingly strong similarities to meteoritic nanodiamonds containing 50 times more C atoms.
△ Less
Submitted 19 April, 2011; v1 submitted 21 January, 2011;
originally announced January 2011.
-
Make Research Data Public? -- Not Always so Simple: A Dialogue for Statisticians and Science Editors
Authors:
Nell Sedransk,
Lawrence H. Cox,
Deborah Nolan,
Keith Soper,
Cliff Spiegelman,
Linda J. Young,
Katrina L. Kelner,
Robert A. Moffitt,
Ani Thakar,
Jordan Raddick,
Edward J. Ungvarsky,
Richard W. Carlson,
Rolf Apweiler
Abstract:
Putting data into the public domain is not the same thing as making those data accessible for intelligent analysis. A distinguished group of editors and experts who were already engaged in one way or another with the issues inherent in making research data public came together with statisticians to initiate a dialogue about policies and practicalities of requiring published research to be accompan…
▽ More
Putting data into the public domain is not the same thing as making those data accessible for intelligent analysis. A distinguished group of editors and experts who were already engaged in one way or another with the issues inherent in making research data public came together with statisticians to initiate a dialogue about policies and practicalities of requiring published research to be accompanied by publication of the research data. This dialogue carried beyond the broad issues of the advisability, the intellectual integrity, the scientific exigencies to the relevance of these issues to statistics as a discipline and the relevance of statistics, from inference to modeling to data exploration, to science and social science policies on these issues.
△ Less
Submitted 3 November, 2010;
originally announced November 2010.
-
Prospects for a mHz-linewidth laser
Authors:
D. Meiser,
Jun Ye,
D. R. Carlson,
M. J. Holland
Abstract:
We propose a new light source based on having alkaline-earth atoms in an optical lattice collectively emit photons on an ultra-narrow clock transition into the mode of a high Q-resonator. The resultant optical radiation has an extremely narrow linewidth in the mHz range, even smaller than that of the clock transition itself due to collective effects. A power level of order $10^{-12}W$ is possibl…
▽ More
We propose a new light source based on having alkaline-earth atoms in an optical lattice collectively emit photons on an ultra-narrow clock transition into the mode of a high Q-resonator. The resultant optical radiation has an extremely narrow linewidth in the mHz range, even smaller than that of the clock transition itself due to collective effects. A power level of order $10^{-12}W$ is possible, sufficient for phase-locking a slave optical local oscillator. Realizing this light source has the potential to improve the stability of the best clocks by two orders of magnitude.
△ Less
Submitted 1 April, 2009; v1 submitted 20 January, 2009;
originally announced January 2009.
