Showing 1–43 of 43 results for author: Chung, W

Speaker-Independent Acoustic-to-Articulatory Inversion through Multi-Channel Attention Discriminator

Authors: Woo-Jin Chung, Hong-Goo Kang

Abstract: We present a novel speaker-independent acoustic-to-articulatory inversion (AAI) model, overcoming the limitations observed in conventional AAI models that rely on acoustic features derived from restricted datasets. To address these challenges, we leverage representations from a pre-trained self-supervised learning (SSL) model to more effectively estimate the global, local, and kinematic pattern in… ▽ More We present a novel speaker-independent acoustic-to-articulatory inversion (AAI) model, overcoming the limitations observed in conventional AAI models that rely on acoustic features derived from restricted datasets. To address these challenges, we leverage representations from a pre-trained self-supervised learning (SSL) model to more effectively estimate the global, local, and kinematic pattern information in Electromagnetic Articulography (EMA) signals during the AAI process. We train our model using an adversarial approach and introduce an attention-based Multi-duration phoneme discriminator (MDPD) designed to fully capture the intricate relationship among multi-channel articulatory signals. Our method achieves a Pearson correlation coefficient of 0.847, marking state-of-the-art performance in speaker-independent AAI models. The implementation details and code can be found online. △ Less

Submitted 25 June, 2024; originally announced June 2024.

Comments: Accepted to INTERSPEECH 2024

The daily modulations and broadband strategy in axion searches. An application with CAST-CAPP detector

Authors: C. M. Adair, K. Altenmüller, V. Anastassopoulos, S. Arguedas Cuendis, J. Baier, K. Barth, A. Belov, D. Bozicevic, H. Bräuninger, G. Cantatore, F. Caspers, J. F. Castel, S. A. Çetin, W. Chung, H. Choi, J. Choi, T. Dafni, M. Davenport, A. Dermenev, K. Desch, B. Döbrich, H. Fischer, W. Funk, J. Galan, A. Gardikiotis , et al. (38 additional authors not shown)

Abstract: It has been previously advocated that the presence of the daily and annual modulations of the axion flux on the Earth's surface may dramatically change the strategy of the axion searches. The arguments were based on the so-called Axion Quark Nugget (AQN) dark matter model which was originally put forward to explain the similarity of the dark and visible cosmological matter densities… ▽ More It has been previously advocated that the presence of the daily and annual modulations of the axion flux on the Earth's surface may dramatically change the strategy of the axion searches. The arguments were based on the so-called Axion Quark Nugget (AQN) dark matter model which was originally put forward to explain the similarity of the dark and visible cosmological matter densities $Ωおめが_{\rm dark}\sim Ωおめが_{\rm visible}$. In this framework, the population of galactic axions with mass $ 10^{-6} {\rm eV}\lesssim m_a\lesssim 10^{-3}{\rm eV}$ and velocity $\langle v_a\rangle\sim 10^{-3} c$ will be accompanied by axions with typical velocities $\langle v_a\rangle\sim 0.6 c$ emitted by AQNs. Furthermore, in this framework, it has also been argued that the AQN-induced axion daily modulation (in contrast with the conventional WIMP paradigm) could be as large as $(10-20)\%$, which represents the main motivation for the present investigation. We argue that the daily modulations along with the broadband detection strategy can be very useful tools for the discovery of such relativistic axions. The data from the CAST-CAPP detector have been used following such arguments. Unfortunately, due to the dependence of the amplifier chain on temperature-dependent gain drifts and other factors, we could not conclusively show the presence or absence of a dark sector-originated daily modulation. However, this proof of principle analysis procedure can serve as a reference for future studies. △ Less

Submitted 9 May, 2024; originally announced May 2024.

Comments: 18 pages, 8 figures

Characterization of uncertainties in electron-argon collision cross sections under statistical principles

Authors: Seung Whan Chung, Todd A. Oliver, Laxminarayan L. Raja, Robert D. Moser

Abstract: The predictive capability of a plasma discharge model depends on accurate representations of electron-impact collision cross sections, which determine the key reaction rates and transport properties of the plasma. Although many cross sections have been identified through experiments and quantum mechanical simulations, their uncertainties are not well-investigated. We characterize the uncertainties… ▽ More The predictive capability of a plasma discharge model depends on accurate representations of electron-impact collision cross sections, which determine the key reaction rates and transport properties of the plasma. Although many cross sections have been identified through experiments and quantum mechanical simulations, their uncertainties are not well-investigated. We characterize the uncertainties in electron-argon collision cross sections using a Bayesian framework. Six collision processes -- elastic momentum transfer, ionization, and four excitations -- are characterized with semi-empirical models, whose parametric uncertainties effectively capture the features important to the macroscopic properties of the plasma, namely transport properties and chemical reaction rates. The method is designed to capture the effects of systematic errors that lead to large discrepancies between some data sets. Specifically, for the purposes of Bayesian inference, each of the parametric cross section models is augmented with a Gaussian process representing systematic measurement errors as well as model inadequacies in the parametric form. The results show that the method is able to capture scatter in the data between the electron-beam experiments and ab-initio quantum simulations. The calibrated cross section models are further validated against measurements from swarm-parameter experiments. △ Less

Submitted 30 March, 2024; originally announced April 2024.

Comments: 37 pages, 17 figures

Report number: LLNL-JRNL-851195

CMOS-compatible photonic integrated circuits on thin-film ScAlN

Authors: Sihao Wang, Veerendra Dhyani, Sakthi Sanjeev Mohanraj, Xiaodong Shi, Binni Varghese, Wing Wai Chung, Ding Huang, Zhi Shiuh Lim, Qibin Zeng, Huajun Liu, Xianshu Luo, Victor Leong, Nanxi Li, Di Zhu

Abstract: Scandium aluminum nitride (ScAlN) has recently emerged as an attractive material for integrated photonics due to its favorable nonlinear optical properties and compatibility with CMOS fabrication. Despite the promising and versatile material properties, it is still an outstanding challenge to realize low-loss photonic circuits on thin-film ScAlN-on-insulator wafers. Here, we present a systematic s… ▽ More Scandium aluminum nitride (ScAlN) has recently emerged as an attractive material for integrated photonics due to its favorable nonlinear optical properties and compatibility with CMOS fabrication. Despite the promising and versatile material properties, it is still an outstanding challenge to realize low-loss photonic circuits on thin-film ScAlN-on-insulator wafers. Here, we present a systematic study on the material quality of sputtered thin-film ScAlN produced in a CMOS-compatible 200 mm line, and an optimized fabrication process to yield 400 nm thick, fully etched waveguides. With surface polishing and annealing, we achieve micro-ring resonators with an intrinsic quality factor as high as $1.47\times 10^5$, corresponding to a propagation loss of 2.4 dBでしべる/cm. These results serve as a critical step towards developing future large-scale, low-loss photonic integrated circuits based on ScAlN. △ Less

Submitted 11 June, 2024; v1 submitted 21 March, 2024; originally announced March 2024.

Journal ref: APL Photon. 9, 066109 (2024)

Train Small, Model Big: Scalable Physics Simulators via Reduced Order Modeling and Domain Decomposition

Authors: Seung Whan Chung, Youngsoo Choi, Pratanu Roy, Thomas Moore, Thomas Roy, Tiras Y. Lin, Du Y. Nguyen, Christopher Hahn, Eric B. Duoss, Sarah E. Baker

Abstract: Numerous cutting-edge scientific technologies originate at the laboratory scale, but transitioning them to practical industry applications is a formidable challenge. Traditional pilot projects at intermediate scales are costly and time-consuming. An alternative, the E-pilot, relies on high-fidelity numerical simulations, but even these simulations can be computationally prohibitive at larger scale… ▽ More Numerous cutting-edge scientific technologies originate at the laboratory scale, but transitioning them to practical industry applications is a formidable challenge. Traditional pilot projects at intermediate scales are costly and time-consuming. An alternative, the E-pilot, relies on high-fidelity numerical simulations, but even these simulations can be computationally prohibitive at larger scales. To overcome these limitations, we propose a scalable, physics-constrained reduced order model (ROM) method. ROM identifies critical physics modes from small-scale unit components, projecting governing equations onto these modes to create a reduced model that retains essential physics details. We also employ Discontinuous Galerkin Domain Decomposition (DG-DD) to apply ROM to unit components and interfaces, enabling the construction of large-scale global systems without data at such large scales. This method is demonstrated on the Poisson and Stokes flow equations, showing that it can solve equations about $15 - 40$ times faster with only $\sim$ $1\%$ relative error. Furthermore, ROM takes one order of magnitude less memory than the full order model, enabling larger scale predictions at a given memory limitation. △ Less

Submitted 5 December, 2023; originally announced January 2024.

Comments: 40 pages, 12 figures. Submitted to Computer Methods in Applied Mechanics and Engineering

Report number: LLNL-JRNL-857774 MSC Class: 65F55; 65N55 (primary) 76D07 (secondary)

Evaluation of the relativistic redshift in frequency standards at KRISS

Authors: Jisun Lee, Jay Hyoun Kwon, Chang Yong Park, Huidong Kim, In-Mook Choi, Jin Wan Chung, Won-Kyu Lee

Abstract: Relativistic redshift correction should be accurately considered in frequency comparisons between frequency standards. In this study, we evaluated the relativistic redshift at Korea Research Institute of Standards and Science (KRISS) using three different methods, depending on whether the approach was traditional or modern or whether the geopotential model was global or local. The results of the t… ▽ More Relativistic redshift correction should be accurately considered in frequency comparisons between frequency standards. In this study, we evaluated the relativistic redshift at Korea Research Institute of Standards and Science (KRISS) using three different methods, depending on whether the approach was traditional or modern or whether the geopotential model was global or local. The results of the three methods agreed well with one another, and the height of an Yb optical lattice clock (KRISS-Yb1) was determined to be 75.15 m with an uncertainty of 0.04 m with respect to the conventionally adopted equipotential surface W0(CGPM), the value of which is defined to be 62 636 856.0 m2/s2. Accordingly, the relativistic redshift of KRISS-Yb1 was evaluated to be 8.193(4)x10-15. These data are applicable to the frequency standards at KRISS, one of which regularly participates in the calibration of the International Atomic Time (TAI). △ Less

Submitted 10 January, 2024; originally announced January 2024.

Comments: accepted in Metrologia

Accelerating Flow Simulations using Online Dynamic Mode Decomposition

Authors: Seung Won Suh, Seung Whan Chung, Peer-Timo Bremer, Youngsoo Choi

Abstract: We develop an on-the-fly reduced-order model (ROM) integrated with a flow simulation, gradually replacing a corresponding full-order model (FOM) of a physics solver. Unlike offline methods requiring a separate FOM-only simulation prior to model reduction, our approach constructs a ROM dynamically during the simulation, replacing the FOM when deemed credible. Dynamic mode decomposition (DMD) is emp… ▽ More We develop an on-the-fly reduced-order model (ROM) integrated with a flow simulation, gradually replacing a corresponding full-order model (FOM) of a physics solver. Unlike offline methods requiring a separate FOM-only simulation prior to model reduction, our approach constructs a ROM dynamically during the simulation, replacing the FOM when deemed credible. Dynamic mode decomposition (DMD) is employed for online ROM construction, with a single snapshot vector used for rank-1 updates in each iteration. Demonstrated on a flow over a cylinder with Re = 100, our hybrid FOM/ROM simulation is verified in terms of the Strouhal number, resulting in a 4.4 times speedup compared to the FOM solver. △ Less

Submitted 30 November, 2023; originally announced November 2023.

Comments: Presented at Machine Learning and the Physical Sciences Workshop, NeurIPS 2023

C2C: Cough to COVID-19 Detection in BHI 2023 Data Challenge

Authors: Woo-Jin Chung, Miseul Kim, Hong-Goo Kang

Abstract: This report describes our submission to BHI 2023 Data Competition: Sensor challenge. Our Audio Alchemists team designed an acoustic-based COVID-19 diagnosis system, Cough to COVID-19 (C2C), and won the 1st place in the challenge. C2C involves three key contributions: pre-processing of input signals, cough-related representation extraction leveraging Wav2vec2.0, and data augmentation. Through exper… ▽ More This report describes our submission to BHI 2023 Data Competition: Sensor challenge. Our Audio Alchemists team designed an acoustic-based COVID-19 diagnosis system, Cough to COVID-19 (C2C), and won the 1st place in the challenge. C2C involves three key contributions: pre-processing of input signals, cough-related representation extraction leveraging Wav2vec2.0, and data augmentation. Through experimental findings, we demonstrate C2C's promising potential to enhance the diagnostic accuracy of COVID-19 via cough signals. Our proposed model achieves a ROC-AUC value of 0.7810 in the context of COVID-19 diagnosis. The implementation details and the python code can be found in the following link: https://github.com/Woo-jin-Chung/BHI_2023_challenge_Audio_Alchemists △ Less

Submitted 1 November, 2023; originally announced November 2023.

Comments: 1st place winning paper from the BHI 2023 Data Challenge Competition: Sensor Informatics

Accelerating Kinetic Simulations of Electrostatic Plasmas with Reduced-Order Modeling

Authors: Ping-Hsuan Tsai, Seung Whan Chung, Debojyoti Ghosh, John Loffeld, Youngsoo Choi, Jonathan L. Belof

Abstract: Despite the advancements in high-performance computing and modern numerical algorithms, the cost remains prohibitive for multi-query kinetic plasma simulations. In this work, we develop data-driven reduced-order models (ROM) for collisionless electrostatic plasma dynamics, based on the kinetic Vlasov-Poisson equation. Our ROM approach projects the equation onto a linear subspace defined by princip… ▽ More Despite the advancements in high-performance computing and modern numerical algorithms, the cost remains prohibitive for multi-query kinetic plasma simulations. In this work, we develop data-driven reduced-order models (ROM) for collisionless electrostatic plasma dynamics, based on the kinetic Vlasov-Poisson equation. Our ROM approach projects the equation onto a linear subspace defined by principal proper orthogonal decomposition (POD) modes. We introduce an efficient tensorial method to update the nonlinear term using a precomputed third-order tensor. We capture multiscale behavior with a minimal number of POD modes by decomposing the solution into multiple time windows using a physical-time indicator and creating a temporally-local ROM. Applied to 1D-1V simulations, specifically the benchmark two-stream instability case, our time-windowed reduced-order model (TW-ROM) with the tensorial approach solves the equation approximately 280 times faster than Eulerian simulations while maintaining a maximum relative error of 4% for the training data and 13% for the testing data. △ Less

Submitted 27 November, 2023; v1 submitted 27 October, 2023; originally announced October 2023.

Comments: 7 pages, 3 figures typos corrected; references added; add one figures for predicted solution fields; fix error in the legend of figure 1.b and caption; add rebox in figure 1.a to indicate training data; add timing for constructing the tensor in offline; add one more paragraph in section 3;

Turbulence in Focus: Benchmarking Scaling Behavior of 3D Volumetric Super-Resolution with BLASTNet 2.0 Data

Authors: Wai Tong Chung, Bassem Akoush, Pushan Sharma, Alex Tamkin, Ki Sung Jung, Jacqueline H. Chen, Jack Guo, Davy Brouzet, Mohsen Talei, Bruno Savard, Alexei Y. Poludnenko, Matthias Ihme

Abstract: Analysis of compressible turbulent flows is essential for applications related to propulsion, energy generation, and the environment. Here, we present BLASTNet 2.0, a 2.2 TB network-of-datasets containing 744 full-domain samples from 34 high-fidelity direct numerical simulations, which addresses the current limited availability of 3D high-fidelity reacting and non-reacting compressible turbulent f… ▽ More Analysis of compressible turbulent flows is essential for applications related to propulsion, energy generation, and the environment. Here, we present BLASTNet 2.0, a 2.2 TB network-of-datasets containing 744 full-domain samples from 34 high-fidelity direct numerical simulations, which addresses the current limited availability of 3D high-fidelity reacting and non-reacting compressible turbulent flow simulation data. With this data, we benchmark a total of 49 variations of five deep learning approaches for 3D super-resolution - which can be applied for improving scientific imaging, simulations, turbulence models, as well as in computer vision applications. We perform neural scaling analysis on these models to examine the performance of different machine learning (ML) approaches, including two scientific ML techniques. We demonstrate that (i) predictive performance can scale with model size and cost, (ii) architecture matters significantly, especially for smaller models, and (iii) the benefits of physics-based losses can persist with increasing model size. The outcomes of this benchmark study are anticipated to offer insights that can aid the design of 3D super-resolution models, especially for turbulence models, while this data is expected to foster ML methods for a broad range of flow physics applications. This data is publicly available with download links and browsing tools consolidated at https://blastnet.github.io. △ Less

Submitted 27 October, 2023; v1 submitted 23 September, 2023; originally announced September 2023.

Comments: Accepted in Adv. in Neural Information Processing Systems 36 (NeurIPS 2023). Link: https://nips.cc/virtual/2023/poster/73433 . 55 pages, 21 figures. Keywords: Super-resolution, 3D, Neural Scaling, Physics-informed Loss, Computational Fluid Dynamics, Partial Differential Equations, Turbulent Reacting Flows, Direct Numerical Simulation, Fluid Mechanics, Combustion, Computer Vision

Four-channel System for Characterization of Josephson Parametric Amplifiers

Authors: Boris I. Ivanov, Jinmyeong Kim, Çağlar Kutlu, Arjan F. van Loo, Yasunobu Nakamura, Sergey V. Uchaikin, Seonjeong Oh, Violeta Gkika, Andrei Matlashov, Woohyun Chung, Yannis K. Semertzidis

Abstract: The axion search experiments based on haloscopes at the Center for Axion and Precision Physics Research (CAPP) of the Institute for Basic Science (IBS) in South Korea are performed in the frequency range from 1 GHz to 6 GHz. In order to perform the experiments in a strong magnetic field of 12 T and a large-volume cavity of close to 40 liters, we use He wet dilution refrigerators with immersed supe… ▽ More The axion search experiments based on haloscopes at the Center for Axion and Precision Physics Research (CAPP) of the Institute for Basic Science (IBS) in South Korea are performed in the frequency range from 1 GHz to 6 GHz. In order to perform the experiments in a strong magnetic field of 12 T and a large-volume cavity of close to 40 liters, we use He wet dilution refrigerators with immersed superconducting magnets. The measurements require continuous operation for months without interruptions for microwave component replacements. This is achieved by using different cryogenic engineering approaches including microwave RF-switching. The critical components, defining the scanning rate and the sensitivity of the setup, are the Josephson parametric amplifiers (JPA) and cryogenic low noise amplifiers (cLNA) based on high-electron-mobility-transistor (HEMT) technology. It is desirable for both devices to have a wide frequency range and low noise close to the quantum limit for the JPA. In this paper, we show a recent design of a 4-channel measurement setup for JPA and HEMT measurements. The setup is based on a 4-channel wideband noise source (NS) and is used for both JPA and HEMT gain and noise measurements. The setup is placed at 20 mK inside the dry dilution refrigerator. The NS is thermally decoupled from the environment using plastic spacers, superconducting wires and superconducting coaxial cables. We show the gain and noise temperature curves measured for 4 HEMT amplifiers and 2 JPAs in one cool-down △ Less

Submitted 9 May, 2023; v1 submitted 26 April, 2023; originally announced April 2023.

Comments: to be published in JPS Conference Proceedings (LT29)

Search for Dark Matter Axions with CAST-CAPP

Authors: C. M. Adair, K. Altenmüller, V. Anastassopoulos, S. Arguedas Cuendis, J. Baier, K. Barth, A. Belov, D. Bozicevic, H. Bräuninger, G. Cantatore, F. Caspers, J. F. Castel, S. A. Çetin, W. Chung, H. Choi, J. Choi, T. Dafni, M. Davenport, A. Dermenev, K. Desch, B. Döbrich, H. Fischer, W. Funk, J. Galan, A. Gardikiotis , et al. (39 additional authors not shown)

Abstract: The CAST-CAPP axion haloscope, operating at CERN inside the CAST dipole magnet, has searched for axions in the 19.74 $μみゅー$eV to 22.47 $μみゅー$eV mass range. The detection concept follows the Sikivie haloscope principle, where Dark Matter axions convert into photons within a resonator immersed in a magnetic field. The CAST-CAPP resonator is an array of four individual rectangular cavities inserted in a st… ▽ More The CAST-CAPP axion haloscope, operating at CERN inside the CAST dipole magnet, has searched for axions in the 19.74 $μみゅー$eV to 22.47 $μみゅー$eV mass range. The detection concept follows the Sikivie haloscope principle, where Dark Matter axions convert into photons within a resonator immersed in a magnetic field. The CAST-CAPP resonator is an array of four individual rectangular cavities inserted in a strong dipole magnet, phase-matched to maximize the detection sensitivity. Here we report on the data acquired for 4124 h from 2019 to 2021. Each cavity is equipped with a fast frequency tuning mechanism of 10 MHz/min between 4.774 GHz and 5.434 GHz. In the present work, we exclude axion-photon couplings for virialized galactic axions down to $g_{aγがんまγがんま} = 8 \times {10^{-14}}$ $GeV^{-1}$ at the 90% confidence level. The here implemented phase-matching technique also allows for future large-scale upgrades. △ Less

Submitted 5 November, 2022; originally announced November 2022.

Comments: 24 pages, 5 figures, Published version available with Open Access at https://www.nature.com/articles/s41467-022-33913-6

Journal ref: Nature Commun. 13, 6180 (2022)

Near-Quantum-Noise Axion Dark Matter Search at CAPP around 9.5 $μみゅー$eV

Authors: Jinsu Kim, Ohjoon Kwon, Çağlar Kutlu, Woohyun Chung, Andrei Matlashov, Sergey Uchaikin, Arjan Ferdinand van Loo, Yasunobu Nakamura, Seonjeong Oh, HeeSu Byun, Danho Ahn, Yannis K. Semertzidis

Abstract: We report the results of an axion dark matter search over an axion mass range of 9.39-9.51 $μみゅー$eV. A flux-driven Josephson parametric amplifier (JPA) was added to the cryogenic receiver chain. A system noise temperature of as low as 200 mK was achieved, which is the lowest recorded noise among published axion cavity experiments with phase-insensitive JPA operation. In addition, we developed a two-s… ▽ More We report the results of an axion dark matter search over an axion mass range of 9.39-9.51 $μみゅー$eV. A flux-driven Josephson parametric amplifier (JPA) was added to the cryogenic receiver chain. A system noise temperature of as low as 200 mK was achieved, which is the lowest recorded noise among published axion cavity experiments with phase-insensitive JPA operation. In addition, we developed a two-stage scanning method which boosted the scan speed by 26%. As a result, a range of two-photon coupling in a plausible model for the QCD axion was excluded with an order of magnitude higher in sensitivity than existing limits. △ Less

Submitted 27 July, 2022; originally announced July 2022.

Comments: 6 pages, 4 figures

The Bearable Lightness of Big Data: Towards Massive Public Datasets in Scientific Machine Learning

Authors: Wai Tong Chung, Ki Sung Jung, Jacqueline H. Chen, Matthias Ihme

Abstract: In general, large datasets enable deep learning models to perform with good accuracy and generalizability. However, massive high-fidelity simulation datasets (from molecular chemistry, astrophysics, computational fluid dynamics (CFD), etc. can be challenging to curate due to dimensionality and storage constraints. Lossy compression algorithms can help mitigate limitations from storage, as long as… ▽ More In general, large datasets enable deep learning models to perform with good accuracy and generalizability. However, massive high-fidelity simulation datasets (from molecular chemistry, astrophysics, computational fluid dynamics (CFD), etc. can be challenging to curate due to dimensionality and storage constraints. Lossy compression algorithms can help mitigate limitations from storage, as long as the overall data fidelity is preserved. To illustrate this point, we demonstrate that deep learning models, trained and tested on data from a petascale CFD simulation, are robust to errors introduced during lossy compression in a semantic segmentation problem. Our results demonstrate that lossy compression algorithms offer a realistic pathway for exposing high-fidelity scientific data to open-source data repositories for building community datasets. In this paper, we outline, construct, and evaluate the requirements for establishing a big data framework, demonstrated at https://blastnet.github.io/, for scientific machine learning. △ Less

Submitted 25 July, 2022; originally announced July 2022.

Comments: Accepted in ICML 2022 2nd AI for Science Workshop. 10 pages, 8 figures

Journal ref: ICML 2022 2nd AI for Science Workshop

MAI-SIM: interferometric multicolor structured illumination microscopy for everybody

Authors: Edward N. Ward, Lisa Hecker, Charles N. Christensen, Jacob R Lamb, Meng Lu, Luca Mascheroni, Chyi Wei Chung, Anna Wang, Christopher J. Rowlands, Gabriele S. Kaminski Schierle, Clemens F. Kaminski

Abstract: Sub-diffraction resolution, gentle sample illumination, and the possibility to image in multiple colors make Structured Illumination Microscopy (SIM) an imaging technique which is particularly well suited for live cell observations. Here, we present Machine learning Assisted Interferometric-SIM (MAI-SIM), an easy-to-implement method for high speed SIM imaging in multiple colors. The instrument is… ▽ More Sub-diffraction resolution, gentle sample illumination, and the possibility to image in multiple colors make Structured Illumination Microscopy (SIM) an imaging technique which is particularly well suited for live cell observations. Here, we present Machine learning Assisted Interferometric-SIM (MAI-SIM), an easy-to-implement method for high speed SIM imaging in multiple colors. The instrument is based on an interferometer design in which illumination patterns are generated, rotated, and stepped in phase through movement of a single galvanometric mirror element. The design is robust, flexible, and the pattern generation process works for all wavelengths. We complement the unique properties of interferometric SIM with a machine learning toolbox that is simple and efficient to use and is superior to existing methods for the reconstruction of super-resolved images recorded by the instrument. The framework permits real-time SIM reconstructions to be performed in multiple colors, providing the user with instant visualization of the super-resolved images. We demonstrate the capability of MAI-SIM on live biological samples and capture super-resolution images in multiple colors simultaneously over large fields of view. Finally, we embrace a fully open design philosophy to bring the advantages of MAI-SIM to as many users as possible and provide full details on system design and software. △ Less

Submitted 1 June, 2022; originally announced June 2022.

Comments: 31 pages, 7 figures, 9 supporting figures

Precision timing for collider-experiment-based calorimetry

Authors: S. V. Chekanov, F. Simon, V. Boudry, W. Chung, P. W. Gorham, M. Nguyen, C. G. Tully, S. C. Eno, Y. Lai, A. V. Kotwal, S. Ko, I. Laktineh, S. Lee, J. S. H. Lee, M. T. Lucchini, R. Prechelt, H. Yoo, C. -H Yeh, S. -S. Yu, G. S. Varner, R. Zhu

Abstract: In this White Paper for the 2021 Snowmass process, we discuss aspects of precision timing within electromagnetic and hadronic calorimeter systems for high-energy physics collider experiments. Areas of applications include particle identification, event and object reconstruction, and pileup mitigation. Two different system options are considered, namely cell-level timing capabilities covering the f… ▽ More In this White Paper for the 2021 Snowmass process, we discuss aspects of precision timing within electromagnetic and hadronic calorimeter systems for high-energy physics collider experiments. Areas of applications include particle identification, event and object reconstruction, and pileup mitigation. Two different system options are considered, namely cell-level timing capabilities covering the full detector volume, and dedicated timing layers integrated in calorimeter systems. A selection of technologies for the different approaches is also discussed. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: 22 pages, 9 figures, Editors: S. V. Chekanov, F. Simon. Submitted to the Proceedings of the US Community Study on the Future of Particle Physics (Snowmass 2021)

Report number: ANL-HEP-173859, MPP-2022-28

Preparation of the spin-Mott state: a spinful Mott insulator of repulsively bound pairs

Authors: Julius de Hond, Jinggang Xiang, Woo Chang Chung, Enid Cruz-Colón, Wenlan Chen, William Cody Burton, Colin J. Kennedy, Wolfgang Ketterle

Abstract: We observe and study a special ground state of bosons with two spin states in an optical lattice: the spin-Mott insulator, a state that consists of repulsively bound pairs which is insulating for both spin and charge transport. Because of the pairing gap created by the interaction anisotropy, it can be prepared with low entropy and can serve as a starting point for adiabatic state preparation. We… ▽ More We observe and study a special ground state of bosons with two spin states in an optical lattice: the spin-Mott insulator, a state that consists of repulsively bound pairs which is insulating for both spin and charge transport. Because of the pairing gap created by the interaction anisotropy, it can be prepared with low entropy and can serve as a starting point for adiabatic state preparation. We find that the stability of the spin-Mott state depends on the pairing energy, and observe two qualitatively different decay regimes, one of which exhibits protection by the gap. △ Less

Submitted 5 October, 2021; v1 submitted 1 October, 2021; originally announced October 2021.

Implementation and Optimization of the PTOLEMY Transverse Drift Electromagnetic Filter

Authors: A. Apponi, M. G. Betti, M. Borghesi, A. Boscá, F. Calle, N. Canci, G. Cavoto, C. Chang, W. Chung, A. G. Cocco, A. P. Colijn, N. D'Ambrosio, N. de Groot, M. Faverzani, A. Ferella, E. Ferri, L. Ficcadenti, P. Garcia-Abia, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, Y. Hochberg, Y. Kahn , et al. (31 additional authors not shown)

Abstract: The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the s… ▽ More The PTOLEMY transverse drift filter is a new concept to enable precision analysis of the energy spectrum of electrons near the tritium beta-decay endpoint. This paper details the implementation and optimization methods for successful operation of the filter. We present the first demonstrator that produces the required magnetic field properties with an iron return-flux magnet. Two methods for the setting of filter electrode voltages are detailed. The challenges of low-energy electron transport in cases of low field are discussed, such as the growth of the cyclotron radius with decreasing magnetic field, which puts a ceiling on filter performance relative to fixed filter dimensions. Additionally, low pitch angle trajectories are dominated by motion parallel to the magnetic field lines and introduce non-adiabatic conditions and curvature drift. To minimize these effects and maximize electron acceptance into the filter, we present a three-potential-well design to simultaneously drain the parallel and transverse kinetic energies throughout the length of the filter. These optimizations are shown, in simulation, to achieve low-energy electron transport from a 1 T iron core (or 3 T superconducting) starting field with initial kinetic energy of 18.6 keV drained to <10 eV (<1 eV) in about 80 cm. This result for low field operation paves the way for the first demonstrator of the PTOLEMY spectrometer for measurement of electrons near the tritium endpoint to be constructed at the Gran Sasso National Laboratary (LNGS) in Italy. △ Less

Submitted 24 January, 2022; v1 submitted 23 August, 2021; originally announced August 2021.

Comments: 29 pages, 25 figures

First Demonstration of Robust Tri-Gate \b{eta}-Ga2O3 Nano-membrane Field-Effect Transistors Operated Up to 400 °C

Authors: Hagyoul Bae, Tae Joon Park, Jinhyun Noh, Wonil Chung, Mengwei Si, Shriram Ramanathan, Peide D. Ye

Abstract: Nano-membrane tri-gate beta-gallium oxide (\b{eta}-Ga2O3) field-effect transistors (FETs) on SiO2/Si substrate fabricated via exfoliation have been demonstrated for the first time. By employing electron beam lithography, the minimum-sized features can be defined with a 50 nm fin structure. For high-quality interface between \b{eta}-Ga2O3 and gate dielectric, atomic layer-deposited 15-nm-thick alum… ▽ More Nano-membrane tri-gate beta-gallium oxide (\b{eta}-Ga2O3) field-effect transistors (FETs) on SiO2/Si substrate fabricated via exfoliation have been demonstrated for the first time. By employing electron beam lithography, the minimum-sized features can be defined with a 50 nm fin structure. For high-quality interface between \b{eta}-Ga2O3 and gate dielectric, atomic layer-deposited 15-nm-thick aluminum oxide (Al2O3) was utilized with Tri-methyl-aluminum (TMA) self-cleaning surface treatment. The fabricated devices demonstrate extremely low subthreshold slope (SS) of 61 mV/dec, high drain current (IDS) ON/OFF ratio of 1.5 X 109, and negligible transfer characteristic hysteresis. We also experimentally demonstrated robustness of these devices with current-voltage (I-V) characteristics measured at temperatures up to 400 °C. △ Less

Submitted 4 May, 2021; originally announced May 2021.

Comments: 5 pages, 6 figures

First prototype of a biaxially textured YBa$_{2}$Cu$_{3}$O$_{7-x}$ microwave cavity in a high magnetic field for dark matter axion search

Authors: Danho Ahn, Ohjoon Kwon, Woohyun Chung, Wonjun Jang, Doyu Lee, Jhinhwan Lee, Sung Woo Youn, HeeSu Byun, Dojun Youm, Yannis K. Semertzidis

Abstract: A high-quality factor microwave resonator in the presence of a strong magnetic field could have a wide range of applications, such as axion dark matter searches where the two aspects must coexist to enhance the experimental sensitivity. We introduce a polygon-shaped cavity design with bi-axially textured YBa$_{2}$Cu$_{3}$O$_{7-x}$ superconducting tapes covering the entire inner wall. Using a 12-si… ▽ More A high-quality factor microwave resonator in the presence of a strong magnetic field could have a wide range of applications, such as axion dark matter searches where the two aspects must coexist to enhance the experimental sensitivity. We introduce a polygon-shaped cavity design with bi-axially textured YBa$_{2}$Cu$_{3}$O$_{7-x}$ superconducting tapes covering the entire inner wall. Using a 12-sided polygon cavity, we obtain substantially improved quality factors of the TM$_{010}$ mode at 6.9 GHz at 4 K with respect to a copper cavity and observe no considerable degradation in the presence of magnetic fields up to 8 T. This corresponds to the first demonstration of practical applications of superconducting radio frequency technology for axion and other research areas requiring low loss in a strong magnetic field. We address the importance of the successful demonstration and discuss further improvements. △ Less

Submitted 26 March, 2021; originally announced March 2021.

Comments: 5 pages, 5 figures

Interpretable Data-driven Methods for Subgrid-scale Closure in LES for Transcritical LOX/GCH4 Combustion

Authors: Wai Tong Chung, Aashwin Ananda Mishra, Matthias Ihme

Abstract: Many practical combustion systems such as those in rockets, gas turbines, and internal combustion engines operate under high pressures that surpass the thermodynamic critical limit of fuel-oxidizer mixtures. These conditions require the consideration of complex fluid behaviors that pose challenges for numerical simulations, casting doubts on the validity of existing subgrid-scale (SGS) models in l… ▽ More Many practical combustion systems such as those in rockets, gas turbines, and internal combustion engines operate under high pressures that surpass the thermodynamic critical limit of fuel-oxidizer mixtures. These conditions require the consideration of complex fluid behaviors that pose challenges for numerical simulations, casting doubts on the validity of existing subgrid-scale (SGS) models in large-eddy simulations of these systems. While data-driven methods have shown high accuracy as closure models in simulations of turbulent flames, these models are often criticized for lack of physical interpretability, wherein they provide answers but no insight into their underlying rationale. The objective of this study is to assess SGS stress models from conventional physics-driven approaches and an interpretable machine learning algorithm, i.e., the random forest regressor, in a turbulent transcritical non-premixed flame. To this end, direct numerical simulations (DNS) of transcritical liquid-oxygen/gaseous-methane (LOX/GCH4) inert and reacting flows are performed. Using this data, a priori analysis is performed on the Favre-filtered DNS data to examine the accuracy of physics-based and random forest SGS-models under these conditions. SGS stresses calculated with the gradient model show good agreement with the exact terms extracted from filtered DNS. The accuracy of the random-forest regressor decreased when physics-based constraints are applied to the feature set. Results demonstrate that random forests can perform as effectively as algebraic models when modeling subgrid stresses, only when trained on a sufficiently representative database. The employment of random forest feature importance score is shown to provide insight into discovering subgrid-scale stresses through sparse regression. △ Less

Submitted 10 March, 2021; originally announced March 2021.

Comments: 22 pages, 13 figures

Journal ref: Combustion and Flame 2021

Tunable Single-Ion Anisotropy in Spin-1 Models Realized with Ultracold Atoms

Authors: Woo Chang Chung, Julius de Hond, Jinggang Xiang, Enid Cruz-Colón, Wolfgang Ketterle

Abstract: Mott insulator plateaus in optical lattices are a versatile platform to study spin physics. Using sites occupied by two bosons with an internal degree of freedom, we realize a uniaxial single-ion anisotropy term proportional to $(S^z)^2$, which plays an important role in stabilizing magnetism for low-dimensional magnetic materials. Here we explore non-equilibrium spin dynamics and observe a resona… ▽ More Mott insulator plateaus in optical lattices are a versatile platform to study spin physics. Using sites occupied by two bosons with an internal degree of freedom, we realize a uniaxial single-ion anisotropy term proportional to $(S^z)^2$, which plays an important role in stabilizing magnetism for low-dimensional magnetic materials. Here we explore non-equilibrium spin dynamics and observe a resonant effect in the spin anisotropy as a function of lattice depth when exchange coupling and on-site anisotropy are similar. Our results are supported by many-body numerical simulations and are captured by the analytical solution of a two-site model. △ Less

Submitted 4 January, 2021; originally announced January 2021.

Journal ref: Phys. Rev. Lett. 126, 163203 (2021)

Data-assisted combustion simulations with dynamic submodel assignment using random forests

Authors: Wai Tong Chung, Aashwin Ananda Mishra, Nikolaos Perakis, Matthias Ihme

Abstract: In this investigation, we outline a data-assisted approach that employs random forest classifiers for local and dynamic combustion submodel assignment in turbulent-combustion simulations. This method is applied in simulations of a single-element GOX/GCH4 rocket combustor; a priori as well as a posteriori assessments are conducted to (i) evaluate the accuracy and adjustability of the classifier for… ▽ More In this investigation, we outline a data-assisted approach that employs random forest classifiers for local and dynamic combustion submodel assignment in turbulent-combustion simulations. This method is applied in simulations of a single-element GOX/GCH4 rocket combustor; a priori as well as a posteriori assessments are conducted to (i) evaluate the accuracy and adjustability of the classifier for targeting different quantities-of-interest (QoIs), and (ii) assess improvements, resulting from the data-assisted combustion model assignment, in predicting target QoIs during simulation runtime. Results from the a priori study show that random forests, trained with local flow properties as input variables and combustion model errors as training labels, assign three different combustion models - finite-rate chemistry (FRC), flamelet progress variable (FPV) model, and inert mixing (IM) - with reasonable classification performance even when targeting multiple QoIs. Applications in a posteriori studies demonstrate improved predictions from data-assisted simulations, in temperature and CO mass fraction, when compared with monolithic FPV calculations. These results demonstrate that this data-driven framework holds promise for the dynamic combustion submodel assignment in reacting flow simulations. △ Less

Submitted 17 January, 2021; v1 submitted 8 September, 2020; originally announced September 2020.

Comments: Accepted version; 23 pages, 12 figures

Journal ref: Combustion and Flame 227 (2021) 172-185

New perspectives on segmented crystal calorimeters for future colliders

Authors: Marco T. Lucchini, Wonyong Chung, Sarah C. Eno, Yihui Lai, Lorenzo Lucchini, Minh-Thi Nguyen, Christopher G. Tully

Abstract: Crystal calorimeters have a long history of pushing the frontier on high-resolution electromagnetic (EM) calorimetry. We explore in this paper major innovations in collider detector performance that can be achieved with crystal calorimetry when longitudinal segmentation and dual-readout capabilities are combined with a new high EM resolution approach to PFA in multi-jet events, such as… ▽ More Crystal calorimeters have a long history of pushing the frontier on high-resolution electromagnetic (EM) calorimetry. We explore in this paper major innovations in collider detector performance that can be achieved with crystal calorimetry when longitudinal segmentation and dual-readout capabilities are combined with a new high EM resolution approach to PFA in multi-jet events, such as $e^+e^+\rightarrow HZ$ events in all-hadronic final-states at Higgs factories. We demonstrate a new technique for pre-processing $πぱい^0$ momenta through combinatoric di-photon pairing in advance of applying jet algorithms. This procedure significantly reduces $πぱい^0$ photon splitting across jets in multi-jet events. The correct photon-to-jet assignment efficiency improves by a factor of 3 with a $3\%/\sqrt{E}$ EM resolution. In addition, the technique of bremsstrahlung photon recovery significantly improves electron momentum measurements. A high EM resolution calorimeter increases the Z boson recoil mass resolution in Higgstrahlung events for decays into electron pairs to 80% of that for muon pairs. We present the design and optimization of a highly segmented crystal detector concept that achieves the required energy resolution, and a time resolution better than 30 ps providing exceptional particle identification capabilities. We demonstrate that, contrary to previous detector designs that suffered from large neutral hadron resolution degradation from one interaction length of crystals in front of a sampling hadron calorimeter, the implementation of dual-readout on crystals permits to achieve a resolution better than $30\%/\sqrt{E}\oplus 2\%$ for neutral hadrons. Our studies find that the integration of crystal calorimetry into future Higgs factory collider detectors can open new perspectives by yielding the highest level of combined EM and neutral hadron resolution in the PFA paradigm. △ Less

Submitted 15 September, 2020; v1 submitted 1 August, 2020; originally announced August 2020.

Journal ref: 2020 JINST 15 P11005

Deformed special relativity based on $αあるふぁ$-deformed binary operations

Authors: Won Sang Chung, Mahouton Norbert Hounkonnou

Abstract: In this paper, we define a new velocity having a dimension of $(Length)^αあるふぁ/(Time)$ and a new acceleration having a dimension of $(Length)^αあるふぁ/(Time)^2$, based on the fractional addition rule. We then discuss the fractional mechanics in one dimension. We show the conservation of fractional energy, and formulate the Hamiltonian formalism for the fractional mechanics. As a matter of illustration, we exh… ▽ More In this paper, we define a new velocity having a dimension of $(Length)^αあるふぁ/(Time)$ and a new acceleration having a dimension of $(Length)^αあるふぁ/(Time)^2$, based on the fractional addition rule. We then discuss the fractional mechanics in one dimension. We show the conservation of fractional energy, and formulate the Hamiltonian formalism for the fractional mechanics. As a matter of illustration, we exhibit some examples for the fractional mechanics. △ Less

Submitted 18 May, 2020; originally announced May 2020.

Superconducting cavity in a high magnetic field

Authors: Danho Ahn, Ohjoon Kwon, Woohyun Chung, Wonjun Jang, Doyu Lee, Jhinhwan Lee, Sung Woo Youn, Dojun Youm, Yannis K. Semertzidis

Abstract: A high Q-factor microwave resonator in a high magnetic field could be used in a wide range of applications, especially for enhancing the scanning speed in axion dark matter research. In this letter, we introduce a polygon-shaped resonant cavity with commercial YBCO tapes covering the entire inner wall. We demonstrated that the maximum Q-factor (TM$_{010}$, 6.93 GHz) of the superconducting YBCO cav… ▽ More A high Q-factor microwave resonator in a high magnetic field could be used in a wide range of applications, especially for enhancing the scanning speed in axion dark matter research. In this letter, we introduce a polygon-shaped resonant cavity with commercial YBCO tapes covering the entire inner wall. We demonstrated that the maximum Q-factor (TM$_{010}$, 6.93 GHz) of the superconducting YBCO cavity was about 6 times higher than that of a copper cavity and showed no significant degradation up to 8 T at 4 K. This is the first indication of the possible applications of HTS technology to the research areas requiring low loss in a strong magnetic field at high radio frequencies. △ Less

Submitted 27 April, 2020; v1 submitted 19 February, 2020; originally announced February 2020.

Comments: 5 pages, 6 figures. arXiv admin note: text overlap with arXiv:1904.05111

Axion Dark Matter Research with IBS/CAPP

Authors: Yannis K. Semertzidis, Jihn E. Kim, SungWoo Youn, Jihoon Choi, Woohyun Chung, Selcuk Haciomeroglu, Dongmin Kim, Jingeun Kim, ByeongRok Ko, Ohjoon Kwon, Andrei Matlashov, Lino Miceli, Hiroaki Natori, Seongtae Park, MyeongJae Lee, Soohyung Lee, Elena Sala, Yunchang Shin, Taehyeon Seong, Sergey Uchaykin, Danho Ahn, Saebyeok Ahn, Seung Pyo Chang, Wheeyeon Cheong, Hoyong Jeong , et al. (12 additional authors not shown)

Abstract: The axion, a consequence of the PQ mechanism, has been considered as the most elegant solution to the strong-CP problem and a compelling candidate for cold dark matter. The Center for Axion and Precision Physics Research (CAPP) of the Institute for Basic Science (IBS) was established on 16 October 2013 with a main objective to launch state of the art axion experiments in South Korea. Relying on th… ▽ More The axion, a consequence of the PQ mechanism, has been considered as the most elegant solution to the strong-CP problem and a compelling candidate for cold dark matter. The Center for Axion and Precision Physics Research (CAPP) of the Institute for Basic Science (IBS) was established on 16 October 2013 with a main objective to launch state of the art axion experiments in South Korea. Relying on the haloscope technique, our strategy is to run several experiments in parallel to explore a wide range of axion masses with sensitivities better than the QCD axion models. We utilize not only the advanced technologies, such as high-field large-volume superconducting (SC) magnets, ultra low temperature dilution refrigerators, and nearly quantum-limited noise amplifiers, but also some unique features solely developed at the Center, including high-quality SC resonant cavities surviving high magnetic fields and efficient cavity geometries to reach high-frequency regions. Our goal is to probe axion dark matter in the frequency range of 1-10 GHz in the first phase and then ultimately up to 25 GHz, even in a scenario where axions constitute only 10% of the local dark matter halo. In this report, the current status and future prospects of the experiments and R&D activities at IBS/CAPP are described. △ Less

Submitted 25 October, 2019; originally announced October 2019.

Comments: 156 pages, 135 figures, conceptual/technical design report

Exploiting higher-order resonant modes for axion haloscopes

Authors: Jinsu Kim, SungWoo Youn, Junu Jeong, Woohyun Chung, Ohjoon Kwon, Yannis K. Semertzidis

Abstract: The haloscope is one of the most sensitive approaches to the QCD axion physics within the region where the axion is considered to be a dark matter candidate. Current experimental sensitivities, which rely on the lowest fundamental TM010 mode of a cylindrical cavity, are limited to relatively low mass regions. Exploiting higher-order resonant modes would be beneficial because it will enable us to e… ▽ More The haloscope is one of the most sensitive approaches to the QCD axion physics within the region where the axion is considered to be a dark matter candidate. Current experimental sensitivities, which rely on the lowest fundamental TM010 mode of a cylindrical cavity, are limited to relatively low mass regions. Exploiting higher-order resonant modes would be beneficial because it will enable us to extend the search range with no volume loss and higher quality factors. This approach has been discarded mainly because of the significant degradation of form factor, and difficulty with frequency tuning. Here we introduce a new tuning mechanism concept which both enhances the form factor and yields reasonable frequency tunability. A proof of concept demonstration verified that this design is feasible for high mass axion search experiments. △ Less

Submitted 25 November, 2019; v1 submitted 2 October, 2019; originally announced October 2019.

Comments: 14 pages, 10 figures

Maintaining high Q-factor of superconducting YBa$_2$Cu$_3$O$_{7-x}$ microwave cavity in a high magnetic field

Authors: Danho Ahn, Ohjoon Kwon, Woohyun Chung, Wonjun Jang, Doyu Lee, Jhinhwan Lee, Sung Woo Youn, Dojun Youm, Yannis K. Semertzidis

Abstract: A high Q-factor microwave resonator in a high magnetic field could be of great use in a wide range of fields, from accelerator design to axion dark matter search. The natural choice of material for the superconducting cavity to be placed in a high field is a high temperature superconductor (HTS) with a high critical field. The deposition, however, of a high-quality, grain-aligned HTS film on a thr… ▽ More A high Q-factor microwave resonator in a high magnetic field could be of great use in a wide range of fields, from accelerator design to axion dark matter search. The natural choice of material for the superconducting cavity to be placed in a high field is a high temperature superconductor (HTS) with a high critical field. The deposition, however, of a high-quality, grain-aligned HTS film on a three-dimensional surface is technically challenging. We have fabricated a polygon-shaped resonant cavity with commercial YBa$_2$Cu$_3$O$_{7-x}$ (YBCO) tapes covering the entire inner wall and measured the Q-factor at 4 K at 6.93 GHz as a function of an external DC magnetic field. We demonstrated that the high Q-factor of the superconducting YBCO cavity showed no significant degradation from 1 T up to 8 T. This is the first indication of the possible applications of HTS technology to the research areas requiring a strong magnetic field at high radio frequencies. △ Less

Submitted 10 April, 2019; originally announced April 2019.

Comments: 4 pages, 3 figures

Deep learning for molecular design - a review of the state of the art

Authors: Daniel C. Elton, Zois Boukouvalas, Mark D. Fuge, Peter W. Chung

Abstract: In the space of only a few years, deep generative modeling has revolutionized how we think of artificial creativity, yielding autonomous systems which produce original images, music, and text. Inspired by these successes, researchers are now applying deep generative modeling techniques to the generation and optimization of molecules - in our review we found 45 papers on the subject published in th… ▽ More In the space of only a few years, deep generative modeling has revolutionized how we think of artificial creativity, yielding autonomous systems which produce original images, music, and text. Inspired by these successes, researchers are now applying deep generative modeling techniques to the generation and optimization of molecules - in our review we found 45 papers on the subject published in the past two years. These works point to a future where such systems will be used to generate lead molecules, greatly reducing resources spent downstream synthesizing and characterizing bad leads in the lab. In this review we survey the increasingly complex landscape of models and representation schemes that have been proposed. The four classes of techniques we describe are recursive neural networks, autoencoders, generative adversarial networks, and reinforcement learning. After first discussing some of the mathematical fundamentals of each technique, we draw high level connections and comparisons with other techniques and expose the pros and cons of each. Several important high level themes emerge as a result of this work, including the shift away from the SMILES string representation of molecules towards more sophisticated representations such as graph grammars and 3D representations, the importance of reward function design, the need for better standards for benchmarking and testing, and the benefits of adversarial training and reinforcement learning over maximum likelihood based training. △ Less

Submitted 22 May, 2019; v1 submitted 11 March, 2019; originally announced March 2019.

Comments: 24 pages, new title, published in RSC MSDE

Journal ref: Molecular Systems Design & Engineering, 2019

High Quality Factor High-Temperature Superconducting Microwave Cavity Development for the Dark Matter Axion Search in a Strong Magnetic Field

Authors: Danho Ahn, Dojun Youm, Ohjoon Kwon, Woohyun Chung, Yannis K. Semertzidis

Abstract: We demonstrate a superconducting (SC) microwave (mw) cavity that can accelerate the dark matter search by maintaining superconductivity in a high DC magnetic field. We used high-temperature superconductor (HTSC) yttrium barium copper oxide (YBCO) with a phase transition temperature of 90K to prevent SC failure by the magnetic field. Since the direct deposition of HTSC film on the metallic mw cavit… ▽ More We demonstrate a superconducting (SC) microwave (mw) cavity that can accelerate the dark matter search by maintaining superconductivity in a high DC magnetic field. We used high-temperature superconductor (HTSC) yttrium barium copper oxide (YBCO) with a phase transition temperature of 90K to prevent SC failure by the magnetic field. Since the direct deposition of HTSC film on the metallic mw cavity is very difficult, we used the commercial HTSC tapes which are flexible metallic tapes coated with HTSC thin films. We fabricated resonating cavity ($f_{TM010}$ ~ 6.89 GHz) with a third of the inner wall covered by YBCO tapes and measured the quality factor (Q factor) at 4K temperature, varying the DC magnetic field from 0 to 8 tesla. There was no significant quality (Q) factor drop and the superconductivity was well maintained even in 8 tesla magnetic field. This implies the possibility of good performance of HTSC mw resonant cavity under a strong magnetic field for axion detection. △ Less

Submitted 22 February, 2019; v1 submitted 12 February, 2019; originally announced February 2019.

Comments: 5 pages, 6 figures, draft, corresponding author changed, v2 was the wrong file

Search for PQ Axions

Authors: Woohyun Chung

Abstract: A major fraction of the mass content of the universe is composed of dark matter (DM), i.e. particles not interacting significantly with electromagnetic radiation, with ordinary matter or self-interacting (cold dark matter). The axion is originally proposed to solve the strong CP problem of quantum chromodynamics, but now emerges as an excellent cold DM candidate. The physics case of these particle… ▽ More A major fraction of the mass content of the universe is composed of dark matter (DM), i.e. particles not interacting significantly with electromagnetic radiation, with ordinary matter or self-interacting (cold dark matter). The axion is originally proposed to solve the strong CP problem of quantum chromodynamics, but now emerges as an excellent cold DM candidate. The physics case of these particles has been considerably developed in recent years, and there are now useful guidelines and powerful motivations to attempt experimental detection. Admittedly, the lack of a positive signal of new physics at the high energy frontier, and in underground detectors searching for weakly interacting massive particles, is also contributing to the increase of interest in axion searches. The experimental landscape is rapidly evolving, with many novel detection concepts and new experimental proposals. The lastest development of the axion search efforts will be discussed. △ Less

Submitted 11 December, 2018; v1 submitted 8 December, 2018; originally announced December 2018.

Comments: This submission has been withdrawn by arXiv administrators due to inappropriate text reuse from external sources

A Design for an Electromagnetic Filter for Precision Energy Measurements at the Tritium Endpoint

Authors: M. G. Betti, M. Biasotti, A. Bosca, F. Calle, J. Carabe-Lopez, G. Cavoto, C. Chang, W. Chung, A. G. Cocco, A. P. Colijn, J. Conrad, N. D'Ambrosio, P. F. de Salas, M. Faverzani, A. Ferella, E. Ferri, P. Garcia-Abia, G. Garcia Gomez-Tejedor, S. Gariazzo, F. Gatti, C. Gentile, A. Giachero, J. Gudmundsson, Y. Hochberg, Y. Kahn , et al. (26 additional authors not shown)

Abstract: We present a detailed description of the electromagnetic filter for the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Starting with an initial estimate for the orbital magnetic moment, the higher-order drift process of ExB is configured to balance the gradient-B drift motion of the electron in such a way as to guide the trajectory into the standing voltage potential alon… ▽ More We present a detailed description of the electromagnetic filter for the PTOLEMY project to directly detect the Cosmic Neutrino Background (CNB). Starting with an initial estimate for the orbital magnetic moment, the higher-order drift process of ExB is configured to balance the gradient-B drift motion of the electron in such a way as to guide the trajectory into the standing voltage potential along the mid-plane of the filter. As a function of drift distance along the length of the filter, the filter zooms in with exponentially increasing precision on the transverse velocity component of the electron kinetic energy. This yields a linear dimension for the total filter length that is exceptionally compact compared to previous techniques for electromagnetic filtering. The parallel velocity component of the electron kinetic energy oscillates in an electrostatic harmonic trap as the electron drifts along the length of the filter. An analysis of the phase-space volume conservation validates the expected behavior of the filter from the adiabatic invariance of the orbital magnetic moment and energy conservation following Liouville's theorem for Hamiltonian systems. △ Less

Submitted 15 October, 2018; originally announced October 2018.

Machine Learning of Energetic Material Properties

Authors: Brian C. Barnes, Daniel C. Elton, Zois Boukouvalas, DeCarlos E. Taylor, William D. Mattson, Mark D. Fuge, Peter W. Chung

Abstract: In this work, we discuss use of machine learning techniques for rapid prediction of detonation properties including explosive energy, detonation velocity, and detonation pressure. Further, analysis is applied to individual molecules in order to explore the contribution of bonding motifs to these properties. Feature descriptors evaluated include Morgan fingerprints, E-state vectors, a custom "sum o… ▽ More In this work, we discuss use of machine learning techniques for rapid prediction of detonation properties including explosive energy, detonation velocity, and detonation pressure. Further, analysis is applied to individual molecules in order to explore the contribution of bonding motifs to these properties. Feature descriptors evaluated include Morgan fingerprints, E-state vectors, a custom "sum over bonds" descriptor, and coulomb matrices. Algorithms discussed include kernel ridge regression, least absolute shrinkage and selection operator ("LASSO") regression, Gaussian process regression, and the multi-layer perceptron (a neural network). Effects of regularization, kernel selection, network parameters, and dimensionality reduction are discussed. We determine that even when using a small training set, non-linear regression methods may create models within a useful error tolerance for screening of materials. △ Less

Submitted 16 July, 2018; originally announced July 2018.

Comments: Preprint for publication in the Proceedings of the 16th International Detonation Symposium

Applying machine learning techniques to predict the properties of energetic materials

Authors: Daniel C. Elton, Zois Boukouvalas, Mark S. Butrico, Mark D. Fuge, Peter W. Chung

Abstract: We present a proof of concept that machine learning techniques can be used to predict the properties of CNOHF energetic molecules from their molecular structures. We focus on a small but diverse dataset consisting of 109 molecular structures spread across ten compound classes. Up until now, candidate molecules for energetic materials have been screened using predictions from expensive quantum simu… ▽ More We present a proof of concept that machine learning techniques can be used to predict the properties of CNOHF energetic molecules from their molecular structures. We focus on a small but diverse dataset consisting of 109 molecular structures spread across ten compound classes. Up until now, candidate molecules for energetic materials have been screened using predictions from expensive quantum simulations and thermochemical codes. We present a comprehensive comparison of machine learning models and several molecular featurization methods - sum over bonds, custom descriptors, Coulomb matrices, bag of bonds, and fingerprints. The best featurization was sum over bonds (bond counting), and the best model was kernel ridge regression. Despite having a small data set, we obtain acceptable errors and Pearson correlations for the prediction of detonation pressure, detonation velocity, explosive energy, heat of formation, density, and other properties out of sample. By including another dataset with 309 additional molecules in our training we show how the error can be pushed lower, although the convergence with number of molecules is slow. Our work paves the way for future applications of machine learning in this domain, including automated lead generation and interpreting machine learning models to obtain novel chemical insights. △ Less

Submitted 13 June, 2018; v1 submitted 15 January, 2018; originally announced January 2018.

Comments: published in Scientific Reports

Journal ref: Scientific Reports 8(1), pg 9059, 2018

Q-deformed Morse and Oscillator potential

Authors: H Hassanabadi, W S Chung, S Zare, S B Bhardwaj

Abstract: In the present work, we studied the q-deformed Morse and harmonic oscillator systems with appropriate canonical commutation algebra. The analytic solutions for eigenfunctions and energy eigenvalues are worked out using time-independent Schrodinger equation and It is also noted that these wave functions are sensitive to variation in the parameters involved. In the present work, we studied the q-deformed Morse and harmonic oscillator systems with appropriate canonical commutation algebra. The analytic solutions for eigenfunctions and energy eigenvalues are worked out using time-independent Schrodinger equation and It is also noted that these wave functions are sensitive to variation in the parameters involved. △ Less

Submitted 1 August, 2017; originally announced August 2017.

Comments: Accepted for publishing in Advances in High Energy Physics journal

Coherence Times of Bose-Einstein Condensates beyond the Shot-Noise Limit via Superfluid Shielding

Authors: William Cody Burton, Colin J. Kennedy, Woo Chang Chung, Samarth Vadia, Wenlan Chen, Wolfgang Ketterle

Abstract: We demonstrate a new way to extend the coherence time of separated Bose-Einstein condensates that involves immersion into a superfluid bath. When both the system and the bath have similar scattering lengths, immersion in a superfluid bath cancels out inhomogeneous potentials either imposed by external fields or inherent in density fluctuations due to atomic shot noise. This effect, which we call s… ▽ More We demonstrate a new way to extend the coherence time of separated Bose-Einstein condensates that involves immersion into a superfluid bath. When both the system and the bath have similar scattering lengths, immersion in a superfluid bath cancels out inhomogeneous potentials either imposed by external fields or inherent in density fluctuations due to atomic shot noise. This effect, which we call superfluid shielding, allows for coherence lifetimes beyond the projection noise limit. We probe the coherence between separated condensates in different sites of an optical lattice by monitoring the contrast and decay of Bloch oscillations. Our technique demonstrates a new way that interactions can improve the performance of quantum devices. △ Less

Submitted 30 November, 2016; v1 submitted 26 October, 2016; originally announced October 2016.

Comments: 4 pages, 4 figures plus 2 page supplement

Journal ref: Phys. Rev. Lett. 117, 275301 (2016)

Observation of Bose-Einstein Condensation in a Strong Synthetic Magnetic Field

Authors: Colin J. Kennedy, William Cody Burton, Woo Chang Chung, Wolfgang Ketterle

Abstract: Extensions of Berry's phase and the quantum Hall effect have led to the discovery of new states of matter with topological properties. Traditionally, this has been achieved using gauge fields created by magnetic fields or spin orbit interactions which couple only to charged particles. For neutral ultracold atoms, synthetic magnetic fields have been created which are strong enough to realize the Ha… ▽ More Extensions of Berry's phase and the quantum Hall effect have led to the discovery of new states of matter with topological properties. Traditionally, this has been achieved using gauge fields created by magnetic fields or spin orbit interactions which couple only to charged particles. For neutral ultracold atoms, synthetic magnetic fields have been created which are strong enough to realize the Harper-Hofstadter model. Despite many proposals and major experimental efforts, so far it has not been possible to prepare the ground state of this system. Here we report the observation of Bose-Einstein condensation for the Harper-Hofstadter Hamiltonian with one-half flux quantum per lattice unit cell. The diffraction pattern of the superfluid state directly shows the momentum distribution on the wavefuction, which is gauge-dependent. It reveals both the reduced symmetry of the vector potential and the twofold degeneracy of the ground state. We explore an adiabatic many-body state preparation protocol via the Mott insulating phase and observe the superfluid ground state in a three-dimensional lattice with strong interactions. △ Less

Submitted 27 March, 2015; originally announced March 2015.

Comments: 6 pages, 5 figures. Supplement: 6 pages, 4 figures

Retrospective Estimation of the Quality of Intensity-Modulated Radiotherapy Plans for Lung Cancer

Authors: Jihye Koo, Myonggeun Yoon, Weon Kuu Chung, Dong Wook Kim

Abstract: This study estimated the planning quality of intensity-modulated radiotherapy in 42 lung cancer cases to provide preliminary data for the development of a planning quality assurance algorithm. Organs in or near the thoracic cavity (ipsilateral lung, contralateral lung, heart, liver, esophagus, spinal cord, and bronchus) were selected as organs at risk (OARs). Radiotherapy plans were compared using… ▽ More This study estimated the planning quality of intensity-modulated radiotherapy in 42 lung cancer cases to provide preliminary data for the development of a planning quality assurance algorithm. Organs in or near the thoracic cavity (ipsilateral lung, contralateral lung, heart, liver, esophagus, spinal cord, and bronchus) were selected as organs at risk (OARs). Radiotherapy plans were compared using the conformity index (CI), coverage index (CVI), and homogeneity index (HI) of the planning target volume (PTV), OAR-PTV distance and OAR-PTV overlap volume, and the V10Gy, V20Gy, and equivalent uniform dose (EUD) of the OARs. The CI, CVI, and HI of the PTV were 0.54 - 0.89 , 0.90 - 1.00 , and 0.11 - 0.41, respectively. The mean EUDs (V10Gy, V20Gy) of the ipsilateral lung, contralateral lung, esophagus, cord, liver, heart, and bronchus were 8.07 Gy (28.06, 13.17), 2.59 Gy (6.53, 1.18), 7.02 Gy (26.17, 12.32), 3.56 Gy (13.56, 4.48), 0.72 Gy (2.15, 0.91), 5.14 Gy (19.68, 8.62), and 10.56 Gy (36.08, 19.79), respectively. EUDs tended to decrease as OAR-PTV distance increased and OAR-PTV overlap volume decreased. Because the plans in this study were from a single department, relatively few people were involved in treatment planning. Differences in treatment results for a given patient would be much more pronounced if many departments were involved. △ Less

Submitted 10 March, 2015; originally announced March 2015.

Preliminary Study for Dosimetric Characteristics of 3D-printed Materials with Megavoltage Photons

Authors: Seonghoon Jeong, Myonggeun yoon, Weon Kuu Chung, Dong Wook Kim

Abstract: In these days, 3D-printer is on the rise in various fields including radiation therapy. This preliminary study aimed to estimate the dose characteristics of the 3D-printer materials which could be used as the compensator or immobilizer in radiation treatment. The cubes which have 5cm length and different densities as 50%, 75% and 100% were printed by 3D-printer. A planning CT scans for cubes were… ▽ More In these days, 3D-printer is on the rise in various fields including radiation therapy. This preliminary study aimed to estimate the dose characteristics of the 3D-printer materials which could be used as the compensator or immobilizer in radiation treatment. The cubes which have 5cm length and different densities as 50%, 75% and 100% were printed by 3D-printer. A planning CT scans for cubes were performed using a CT simulator (Brilliance CT, Philips Medical System, Netherlands). Dose distributions behind the cube were calculated when 6MV photon beam passed through cube. The dose response for 3D-printed cube, air and water were measured by using EBT3 film and 2D array detector. When results of air case were normalized to 100, dose calculated by TPS and measured dose of 50% and 75% cube were 96~99. Measured and calculated doses of water and 100% cube were 82~84. HU values of 50%, 75% and 100% were -910, -860 and -10, respectively. From these results, 3D-printer in radiotherapy could be used for medical purpose accurately. △ Less

Submitted 10 March, 2015; originally announced March 2015.

On the fractional damped oscillators and fractional forced oscillators

Authors: Won Sang Chung, Min Jung

Abstract: In this paper, we use the fractional calculus to discuss the fractional mechanics, where the time derivative is replaced with the fractional derivative of order $νにゅー$. We deal with the motion of a body in a resisting medium where the retarding force is assumed to be proportional to the fractional velocity which is obtained by acting the fractional derivative on the position. The fractional harmonic… ▽ More In this paper, we use the fractional calculus to discuss the fractional mechanics, where the time derivative is replaced with the fractional derivative of order $νにゅー$. We deal with the motion of a body in a resisting medium where the retarding force is assumed to be proportional to the fractional velocity which is obtained by acting the fractional derivative on the position. The fractional harmonic oscillator problem, fractional damped oscillator problem and fractional forced oscillator problem are also studied. △ Less

Submitted 12 February, 2013; originally announced February 2013.

New exponential, logarithm and q-probability in the non-extensive statistical physics

Authors: Won Sang Chung

Abstract: In this paper, a new exponential and logarithm related to the non-extensive statistical physics is proposed by using the q-sum and q-product which satisfy the distributivity. And we discuss the q-mapping from an ordinary probability to q-probability. The q-entropy defined by the idea of q-probability is shown to be q-additive. In this paper, a new exponential and logarithm related to the non-extensive statistical physics is proposed by using the q-sum and q-product which satisfy the distributivity. And we discuss the q-mapping from an ordinary probability to q-probability. The q-entropy defined by the idea of q-probability is shown to be q-additive. △ Less

Submitted 7 February, 2013; originally announced February 2013.

Comments: arXiv admin note: text overlap with arXiv:1301.5480

On the $q$-Laplace transform in the non-extensive statistical physics

Authors: Won Sang Chung

Abstract: In this paper, q-Laplace transforms related to the non-extensive thermodynamics are investigated by using the algebraic operation of the non-extensive calculus. The deformed simple harmonic problem is discussed by using the q-Laplace transform. In this paper, q-Laplace transforms related to the non-extensive thermodynamics are investigated by using the algebraic operation of the non-extensive calculus. The deformed simple harmonic problem is discussed by using the q-Laplace transform. △ Less

Submitted 23 January, 2013; originally announced January 2013.