-
First heat flux estimation in the lower divertor of WEST with embedded thermal measurements
Authors:
J. Gaspar,
Y. Corre,
M. Firdaouss,
J. Gardarein,
J. Gerardin,
J. Gunn,
M. Houry,
G. Laffont,
T. Loarer,
M. Missirlian,
J. Morales,
P. Moreau,
C. Pocheau,
E. Tsitrone,
West Team
Abstract:
The present paper deals with the surface heat flux estimation with thermocouples (TC) and fiber Bragg grating (FBG) embedded in the plasma facing components (PFC) of the WEST tokamak. A 2D heat transfer model combined with the conjugate gradient method (CGM) and the adjoint state is used to estimate the plasma heat flux deposited on the PFC. The plasma heat flux is characterized by the time evolut…
▽ More
The present paper deals with the surface heat flux estimation with thermocouples (TC) and fiber Bragg grating (FBG) embedded in the plasma facing components (PFC) of the WEST tokamak. A 2D heat transfer model combined with the conjugate gradient method (CGM) and the adjoint state is used to estimate the plasma heat flux deposited on the PFC. The plasma heat flux is characterized by the time evolution of its amplitude and spatial shape on the target (heat flux decay length $λ^t_q$, power spreading in the private flux region $S^t$ and the strike point location $x_0$). As a first step, five ohmic pulses have been investigated with different magnetic configuration and divertor X-point height varying from 44 to 68 mm from the surface. Despite an outboard shift, the relative displacements of the outer strike point as well as the heat flux decay length derived from the TC/FBG systems are consistent with the magnetic equilibrium reconstruction.
△ Less
Submitted 28 February, 2019;
originally announced February 2019.
-
Experimental study of convection in the compressible regime
Authors:
Rémi Menaut,
Yoann Corre,
Ludovic Huguet,
Thomas Le Reun,
Thierry Alboussière,
Michael Bergman,
Renaud Deguen,
Stéphane Labrosse,
Marc Moulin
Abstract:
An experiment of thermal convection with significant compressible effects is presented. The high-gravity environment of a centrifuge and the choice of xenon gas enable us to observe an average adiabatic temperature gradient up to 3.5 K cm$^{-1}$ over a 4 cm high cavity. At the highest rotation rate investigated, 9990 rpm, the superadiabatic temperature difference applied to the gas layer is less t…
▽ More
An experiment of thermal convection with significant compressible effects is presented. The high-gravity environment of a centrifuge and the choice of xenon gas enable us to observe an average adiabatic temperature gradient up to 3.5 K cm$^{-1}$ over a 4 cm high cavity. At the highest rotation rate investigated, 9990 rpm, the superadiabatic temperature difference applied to the gas layer is less than the adiabatic temperature difference. The convective regime is characterized by a large Rayleigh number, about 10$^{12}$, and dominant Coriolis forces (Ekman number of order 10$^{-6}$). The analysis of temperature and pressure fluctuations in our experiments shows that the dynamics of the flow is in a quasi-geostrophic regime. Still, a classical power law (exponent 0.3 $\pm$ 0.04) is observed between the Nusselt number (dimensionless heat flux) and the superadiabatic Rayleigh number (dimensionless superadiabatic temperature difference). However, a potential hysteresis is seen between this classical high flux regime and a lower heat flux regime. It is unclear whether this is due to compressible or Coriolis effects. In the transient regime of convection from an isothermal state, we observe a local decrease of temperature which can only be explained by adiabatic decompression.
△ Less
Submitted 25 March, 2019; v1 submitted 11 December, 2018;
originally announced December 2018.
-
Characterisation of local ICRF heat loads on the JET ILW
Authors:
P. Jacquet,
F. Marcotte,
L. Colas,
G. Arnoux,
V. Bobkov,
Y. Corre,
S. Devaux,
J-L Gardarein,
E. Gauthier,
M. Graham,
E. Lerche,
M-L. Mayoral,
I. Monakhov,
F. Rimini,
A. Sirinelli,
D. Van Eester,
JET EFDA contributors
Abstract:
When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat flux to the JET ICRF antennas. Using Infra-Red thermography and thermal models of the tiles, heat-fluxes were evaluated from the sur…
▽ More
When using Ion Cyclotron Range of Frequency (ICRF) heating, enhanced heat-fluxes are commonly observed on some plasma facing components close to the antennas. Experiments have recently been carried out on JET with the new ITER-Like-Wall (ILW) to characterize the heat flux to the JET ICRF antennas. Using Infra-Red thermography and thermal models of the tiles, heat-fluxes were evaluated from the surface temperature increase during the RF phase of L-mode plasmas. The maximum observed heat-flux intensity was ~ 4.5 MW/m2 when operating with -π/2 current drive strap phasing at power level of 2MW per antenna and with a 4 cm distance between the plasma and the outer limiters. Heat-fluxes are reduced when using dipole strap phasing. The fraction of ICRF power deposited on the antenna limiters or septa was in the range 2-10% for dipole phasing and 10-20% with +/-π/2 phasing.
△ Less
Submitted 28 June, 2013;
originally announced June 2013.