-
Towards a Muon Collider
Authors:
Carlotta Accettura,
Dean Adams,
Rohit Agarwal,
Claudia Ahdida,
Chiara Aimè,
Nicola Amapane,
David Amorim,
Paolo Andreetto,
Fabio Anulli,
Robert Appleby,
Artur Apresyan,
Aram Apyan,
Sergey Arsenyev,
Pouya Asadi,
Mohammed Attia Mahmoud,
Aleksandr Azatov,
John Back,
Lorenzo Balconi,
Laura Bandiera,
Roger Barlow,
Nazar Bartosik,
Emanuela Barzi,
Fabian Batsch,
Matteo Bauce,
J. Scott Berg
, et al. (272 additional authors not shown)
Abstract:
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi…
▽ More
A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work.
△ Less
Submitted 27 November, 2023; v1 submitted 15 March, 2023;
originally announced March 2023.
-
A Work Proposal for a Collaborative Study of Magnet Technology for a Future Muon Collider
Authors:
L. Bottura,
D. Aguglia,
B. Auchmann,
T. Arndt,
J. Beard,
A. Bersani,
F. Boattini,
M. Breschi,
B. Caiffi,
X. Chaud,
M. Dam,
F. Debray,
H. De Gersem,
E. De Matteis,
A. Dudarev,
S. Farinon,
A. Kario,
R. Losito,
S. Mariotto,
M. Mentink,
R. Musenich,
T. Ogitsu,
M. Prioli,
L. Quettier,
L. Rossi
, et al. (8 additional authors not shown)
Abstract:
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish…
▽ More
In this paper we elaborate on the nature and challenges for the magnet systems of a muon collider as presently considered within the scope of the International Muon Collider Collaboration (IMCC). We outline the structure of the work proposed over the coming period of five years to study and demonstrate relevant magnet technology. The proposal, which is part of the overall work planned to establish feasibility of a muon collider, is in direct response to the recent recommendations received from the Laboratories Directors Group (LDG). The plan is to profit from joint activities, within the scope of the IMCC and beyond, implemented through direct and EU-funded contributions.
△ Less
Submitted 29 March, 2022; v1 submitted 26 March, 2022;
originally announced March 2022.
-
A Muon Collider Facility for Physics Discovery
Authors:
D. Stratakis,
N. Mokhov,
M. Palmer,
N. Pastrone,
T. Raubenheimer,
C. Rogers,
D. Schulte,
V. Shiltsev,
J. Tang,
A. Yamamoto,
C. Aimè,
M. A. Mahmoud,
N. Bartosik,
E. Barzi,
A. Bersani,
A. Bertolin,
M. Bonesini,
B. Caiffi,
M. Casarsa,
M. G. Catanesi,
A. Cerri,
C. Curatolo,
M. Dam,
H. Damerau,
E. De Matteis
, et al. (44 additional authors not shown)
Abstract:
Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this conte…
▽ More
Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this context, a new international collaboration has formed to further extend the design concepts and performance studies of such a machine. This effort is focused on delivering the elements of a $\sim$10 TeV center of mass (CM) energy design to explore the physics energy frontier. The path to such a machine may pass through lower energy options. Currently a 3 TeV CM stage is considered. Other energy stages could also be explored, e.g. an s-channel Higgs Factory operating at 125 GeV CM. We describe the status of the R&D and design effort towards such a machine and lay out a plan to bring these concepts to maturity as a tool for the high energy physics community.
△ Less
Submitted 15 March, 2022;
originally announced March 2022.
-
Challenges for FCC-ee Luminosity Monitor Design
Authors:
Mogens Dam
Abstract:
For cross section measurements, an accurate knowledge of the integrated luminosity is required. The FCC-ee Z lineshape programme sets the ambitious precision goal of $10^{-4}$ on the \emph{absolute} luminosity measurement and one order of magnitude better on the \emph{relative} measurement between energy-scan points. The luminosity is determined from the rate of small-angle Bhabha scattering,…
▽ More
For cross section measurements, an accurate knowledge of the integrated luminosity is required. The FCC-ee Z lineshape programme sets the ambitious precision goal of $10^{-4}$ on the \emph{absolute} luminosity measurement and one order of magnitude better on the \emph{relative} measurement between energy-scan points. The luminosity is determined from the rate of small-angle Bhabha scattering, $\mathrm{e^+e^- \to e^+e^-}$, where the final state electrons and positrons are detected in dedicated monitors covering small angles from the outgoing beam directions. The constraints on the luminosity monitors are multiple: \mbox{\emph{i}) they} are placed inside the main detector volume only about 1\,m from the interaction point; \mbox{\emph{ii})} they are centred around the outgoing beam lines and do not satisfy the normal axial detector symmetry; \mbox{\emph{iii})} their coverage is limited by the beam pipe, on the one hand, and the requirement to stay clear of the main detector acceptance, on the other; \mbox{\emph{iv})} the steep angular dependence of the Bhabha scattering process imposes a geometrical precision on the acceptance limits at about 1\,\textmugreek rad, corresponding to geometrical precisions of $\mathcal{O}(1\,\text{\textmugreek m})$; and \mbox{\emph{v})} the very high bunch crossing rate of 50\,MHz during the Z-pole operation calls for fast readout electronics. %Some constraints may be hard to satisfy simultaneously. As an example, the high readout rate may lead to an elevated level of heat dissipation rendering it difficult to maintain the required geometrical stability. Inspired by second-generation LEP luminosity monitors, a proposed ultra-compact solution is based on a sandwich of tungsten-silicon layers. A vigorous R\&D programme is needed in order to ensure that such a solution satisfies the more challenging FCC-ee requirements.
△ Less
Submitted 27 July, 2021;
originally announced July 2021.
-
Challenges for the interaction region design of the Future Circular Collider FCC-ee
Authors:
Manuela Boscolo,
Nicola Bacchetta,
Michael Benedikt,
Laurent Brunetti,
Helmut Burkhardt,
Andrea Ciarma,
Mogens Dam,
Francesco Fransesini,
Mark Jones,
Roberto Kersevan,
Mike Koratzinos,
Marian Lueckhof,
Mauro Migliorati,
Eva Montbarbon,
Alexander Novokhatski,
Katsunobu Oide,
Luigi Pellegrino,
Freddy Poirier,
Maurizio Serluca,
Michael K. Sullivan,
Leonard Watrelot,
Frank Zimmermann
Abstract:
The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discu…
▽ More
The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discuss the possible impact of the radiation generated in the interaction region including beamstrahlung.
△ Less
Submitted 20 May, 2021;
originally announced May 2021.
-
The ABC130 barrel module prototyping programme for the ATLAS strip tracker
Authors:
Luise Poley,
Craig Sawyer,
Sagar Addepalli,
Anthony Affolder,
Bruno Allongue,
Phil Allport,
Eric Anderssen,
Francis Anghinolfi,
Jean-François Arguin,
Jan-Hendrik Arling,
Olivier Arnaez,
Nedaa Alexandra Asbah,
Joe Ashby,
Eleni Myrto Asimakopoulou,
Naim Bora Atlay,
Ludwig Bartsch,
Matthew J. Basso,
James Beacham,
Scott L. Beaupré,
Graham Beck,
Carl Beichert,
Laura Bergsten,
Jose Bernabeu,
Prajita Bhattarai,
Ingo Bloch
, et al. (224 additional authors not shown)
Abstract:
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000…
▽ More
For the Phase-II Upgrade of the ATLAS Detector, its Inner Detector, consisting of silicon pixel, silicon strip and transition radiation sub-detectors, will be replaced with an all new 100 % silicon tracker, composed of a pixel tracker at inner radii and a strip tracker at outer radii. The future ATLAS strip tracker will include 11,000 silicon sensor modules in the central region (barrel) and 7,000 modules in the forward region (end-caps), which are foreseen to be constructed over a period of 3.5 years. The construction of each module consists of a series of assembly and quality control steps, which were engineered to be identical for all production sites. In order to develop the tooling and procedures for assembly and testing of these modules, two series of major prototyping programs were conducted: an early program using readout chips designed using a 250 nm fabrication process (ABCN-25) and a subsequent program using a follow-up chip set made using 130 nm processing (ABC130 and HCC130 chips). This second generation of readout chips was used for an extensive prototyping program that produced around 100 barrel-type modules and contributed significantly to the development of the final module layout. This paper gives an overview of the components used in ABC130 barrel modules, their assembly procedure and findings resulting from their tests.
△ Less
Submitted 7 September, 2020;
originally announced September 2020.
-
CLD -- A Detector Concept for the FCC-ee
Authors:
N. Bacchetta,
J. -J. Blaising,
E. Brondolin,
M. Dam,
D. Dannheim,
K. Elsener,
D. Hynds,
P. Janot,
A. M. Kolano,
E. Leogrande,
L. Linssen,
A. Nürnberg,
E. F. Perez,
M. Petrič,
P. Roloff,
A. Sailer,
N. Siegrist,
O. Viazlo,
G. G. Voutsinas,
M. A. Weber
Abstract:
This note gives a conceptual description and illustration of the CLD detector, based on the work for a detector at CLIC. CLD is one of the detectors envisaged at a future 100 km $e^+e^-$ circular collider (FCC-ee). The note also contains a brief description of the simulation and reconstruction tools used in the linear collider community, which have been adapted for physics and performance studies…
▽ More
This note gives a conceptual description and illustration of the CLD detector, based on the work for a detector at CLIC. CLD is one of the detectors envisaged at a future 100 km $e^+e^-$ circular collider (FCC-ee). The note also contains a brief description of the simulation and reconstruction tools used in the linear collider community, which have been adapted for physics and performance studies of CLD. The detector performance is described in terms of single particles, particles in jets, jet energy and angular resolution, and flavour tagging. The impact of beam-related backgrounds (incoherent $e^+e^-$ pairs and synchrotron radiation photons) on the performance is also discussed.
△ Less
Submitted 12 December, 2019; v1 submitted 27 November, 2019;
originally announced November 2019.
-
Beam-beam effects on the luminosity measurement at LEP and the number of light neutrino species
Authors:
Georgios Voutsinas,
Emmanuel Perez,
Mogens Dam,
Patrick Janot
Abstract:
In $e^+ e^-$ collisions, electromagnetic effects caused by large charge density bunches modify the effective acceptance of the luminometer system of the experiments. These effects consequently bias the luminosity measurement from the rate of low-angle Bhabha interactions $e^+ e^- \to e^+ e^- $. Surprisingly enough, the magnitude of this bias is found to yield an underestimation of the integrated l…
▽ More
In $e^+ e^-$ collisions, electromagnetic effects caused by large charge density bunches modify the effective acceptance of the luminometer system of the experiments. These effects consequently bias the luminosity measurement from the rate of low-angle Bhabha interactions $e^+ e^- \to e^+ e^- $. Surprisingly enough, the magnitude of this bias is found to yield an underestimation of the integrated luminosity measured by the LEP experiments by about 0.1%, significantly larger than the reported experimental uncertainties. When accounted for, this effect modifies the number of light neutrino species determined at LEP from the measurement of the hadronic cross section at the Z peak.
△ Less
Submitted 30 October, 2019; v1 submitted 5 August, 2019;
originally announced August 2019.
-
Beam-beam effects on the luminosity measurement at FCC-ee
Authors:
Georgios Voutsinas,
Emmanuel Perez,
Mogens Dam,
Patrick Janot
Abstract:
The first part of the physics programme of the integrated FCC (Future Circular Colliders) proposal includes measurements of Standard Model processes in $e^+e^-$ collisions (FCC-ee) with an unprecedented precision. In particular, the potential precision of the Z lineshape determination calls for a very precise measurement of the absolute luminosity, at the level of 1E-4, and the precision on the re…
▽ More
The first part of the physics programme of the integrated FCC (Future Circular Colliders) proposal includes measurements of Standard Model processes in $e^+e^-$ collisions (FCC-ee) with an unprecedented precision. In particular, the potential precision of the Z lineshape determination calls for a very precise measurement of the absolute luminosity, at the level of 1E-4, and the precision on the relative luminosity between energy scan points around the Z pole should be an order of magnitude better. The luminosity is principally determined from the rate of low-angle Bhabha interactions, $e^+e^- \to e^+e^-$, where the final state electrons and positrons are detected in dedicated calorimeters covering small angles from the outgoing beam directions. Electromagnetic effects caused by the very large charge density of the beam bunches affect the effective acceptance of these luminometers in a nontrivial way. If not corrected for, these effects would lead, at the Z pole, to a systematic bias of the measured luminosity that is more than one order of magnitude larger than the desired precision. In this note, these effects are studied in detail, and methods to measure and correct for them are proposed.
△ Less
Submitted 30 October, 2019; v1 submitted 5 August, 2019;
originally announced August 2019.
-
FCC-ee: Your Questions Answered
Authors:
Alain Blondel,
Patrick Janot,
Niloufar Alipour Tehrani,
Patrizia Azzi,
Paolo Azzurri,
Nicola Bacchetta,
Michael Benedikt,
Freya Blekman,
Manuela Boscolo,
Mogens Dam,
Stefania De Curtis,
David d'Enterria,
John Ellis,
Gerardo Ganis,
Janusz Gluza,
Clément Helsens,
Staszek Jadach,
Mike Koratzinos,
Markus Klute,
Christos Leonidopoulos,
Elizabeth Locci,
Michelangelo Mangano,
Stéphane Monteil,
Katsunobu Oide,
Vitaly Okorokov
, et al. (7 additional authors not shown)
Abstract:
This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 20…
▽ More
This document answers in simple terms many FAQs about FCC-ee, including comparisons with other colliders. It complements the FCC-ee CDR and the FCC Physics CDR by addressing many questions from non-experts and clarifying issues raised during the European Strategy symposium in Granada, with a view to informing discussions in the period between now and the final endorsement by the CERN Council in 2020 of the European Strategy Group recommendations. This document will be regularly updated as more questions appear or new information becomes available.
△ Less
Submitted 6 June, 2019;
originally announced June 2019.
-
Machine detector interface for the $e^+e^-$ future circular collider
Authors:
Manuela Boscolo,
Oscar Blanco-Garcia,
Nicola Bacchetta,
Eleonora Belli,
Michael Benedikt,
Helmut Burkhardt,
Miguel Gil Costa,
Konrad Elsener,
Emilia Leogrande,
Patrick Janot,
Herman Ten Kate,
Dima El Khechen,
Anna Kolano,
Roberto Kersevan,
Marian Lueckof,
Katsunobu Oide,
Emmanuel Perez,
Nilou Teherani,
O. Viazlo,
Yorgos Voutsinas,
Frank Zimmermann,
Mogens Dam,
Alain Blondel,
M. Koratzinos,
Alexander Novokhatski
, et al. (5 additional authors not shown)
Abstract:
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision s…
▽ More
The international Future Circular Collider (FCC) study aims at a design of $pp$, $e^+e^-$, $ep$ colliders to be built in a new 100 km tunnel in the Geneva region. The $e^+e^-$ collider (FCC-ee) has a centre of mass energy range between 90 (Z-pole) and 375 GeV (tt_bar). To reach such unprecedented energies and luminosities, the design of the interaction region is crucial. The crab-waist collision scheme has been chosen for the design and it will be compatible with all beam energies. In this paper we will describe the machine detector interface layout including the solenoid compensation scheme. We will describe how this layout fulfills all the requirements set by the parameters table and by the physical constraints. We will summarize the studies of the impact of the synchrotron radiation, the analysis of trapped modes and of the backgrounds induced by single beam and luminosity effects giving an estimate of the losses in the interaction region and in the detector.
△ Less
Submitted 9 May, 2019;
originally announced May 2019.
-
A Layer Correlation technique for pion energy calibration at the 2004 ATLAS Combined Beam Test
Authors:
E. Abat,
J. M. Abdallah,
T. N. Addy,
P. Adragna,
M. Aharrouche,
A. Ahmad,
T. P. A. Akesson,
M. Aleksa,
C. Alexa,
K. Anderson,
A. Andreazza,
F. Anghinolfi,
A. Antonaki,
G. Arabidze,
E. Arik,
T. Atkinson,
J. Baines,
O. K. Baker,
D. Banfi,
S. Baron,
A. J. Barr,
R. Beccherle,
H. P. Beck,
B. Belhorma,
P. J. Bell
, et al. (460 additional authors not shown)
Abstract:
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in…
▽ More
A new method for calibrating the hadron response of a segmented calorimeter is developed and successfully applied to beam test data. It is based on a principal component analysis of energy deposits in the calorimeter layers, exploiting longitudinal shower development information to improve the measured energy resolution. Corrections for invisible hadronic energy and energy lost in dead material in front of and between the calorimeters of the ATLAS experiment were calculated with simulated Geant4 Monte Carlo events and used to reconstruct the energy of pions impinging on the calorimeters during the 2004 Barrel Combined Beam Test at the CERN H8 area. For pion beams with energies between 20 GeV and 180 GeV, the particle energy is reconstructed within 3% and the energy resolution is improved by between 11% and 25% compared to the resolution at the electromagnetic scale.
△ Less
Submitted 12 May, 2011; v1 submitted 20 December, 2010;
originally announced December 2010.