Showing 1–5 of 5 results for author: Demichev, M

Technical Design Report of the Spin Physics Detector at NICA

Authors: The SPD Collaboration, V. Abazov, V. Abramov, L. Afanasyev, R. Akhunzyanov, A. Akindinov, I. Alekseev, A. Aleshko, V. Alexakhin, G. Alexeev, L. Alimov, A. Allakhverdieva, A. Amoroso, V. Andreev, V. Andreev, E. Andronov, Yu. Anikin, S. Anischenko, A. Anisenkov, V. Anosov, E. Antokhin, A. Antonov, S. Antsupov, A. Anufriev, K. Asadova , et al. (392 additional authors not shown)

Abstract: The Spin Physics Detector collaboration proposes to install a universal detector in the second interaction point of the NICA collider under construction (JINR, Dubna) to study the spin structure of the proton and deuteron and other spin-related phenomena using a unique possibility to operate with polarized proton and deuteron beams at a collision energy up to 27 GeV and a luminosity up to… ▽ More The Spin Physics Detector collaboration proposes to install a universal detector in the second interaction point of the NICA collider under construction (JINR, Dubna) to study the spin structure of the proton and deuteron and other spin-related phenomena using a unique possibility to operate with polarized proton and deuteron beams at a collision energy up to 27 GeV and a luminosity up to $10^{32}$ cm$^{-2}$ s$^{-1}$. As the main goal, the experiment aims to provide access to the gluon TMD PDFs in the proton and deuteron, as well as the gluon transversity distribution and tensor PDFs in the deuteron, via the measurement of specific single and double spin asymmetries using different complementary probes such as charmonia, open charm, and prompt photon production processes. Other polarized and unpolarized physics is possible, especially at the first stage of NICA operation with reduced luminosity and collision energy of the proton and ion beams. This document is dedicated exclusively to technical issues of the SPD setup construction. △ Less

Submitted 28 May, 2024; v1 submitted 12 April, 2024; originally announced April 2024.

Radiation hardness of GaAs: Cr and Si sensors irradiated by electron beam

Authors: U. Kruchonak, S. Abou El-Azm, K. Afanaciev, G. Chelkov, M. Demichev, M. Gostkin, A. Guskov, E. Firu, V. Kobets, A. Leyva, d, A. Nozdrin, S. Porokhovoy, A. Sheremetyeva, P. Smolyanskiy, A. Torres, A. Tyazhev, O. Tolbanov, N. Zamyatin, A. Zarubin, A. Zhemchugov

Abstract: The interest in using the radiation detectors based on high resistive chromium-compensated GaAs (GaAs:Cr) in high energy physics and others applied fields has been growing steadily due to its numerous advantages over others classical materials. High radiation hardness at room temperature stands out and needs to be systematically investigated. In this paper an experimental study of the effect of 20… ▽ More The interest in using the radiation detectors based on high resistive chromium-compensated GaAs (GaAs:Cr) in high energy physics and others applied fields has been growing steadily due to its numerous advantages over others classical materials. High radiation hardness at room temperature stands out and needs to be systematically investigated. In this paper an experimental study of the effect of 20.9 MeV electrons generated by the LINAC-200 accelerator on some properties of GaAs:Cr based sensors is presented. In parallel, Si sensors were irradiated at the same conditions, measured and analyzed in order to perform a comparative study. The target sensors were irradiated with the dose up to 1.5 MGy. The current-voltage characteristics, resistivity, charge collection efficiency and their dependences on the bias voltage and temperature were measured at different absorbed doses. An analysis of the possible microscopic mechanisms leading to the observed effects in GaAs:Cr sensors is presented in the article. △ Less

Submitted 1 June, 2020; originally announced June 2020.

Comments: Paper sent to journal "Nuclear Inst. and Methods in Physics Research, A"

Journal ref: Nuclear Inst. and Methods in PhysicsResearch, A(2020)

Performance and Moli`ere radius measurements using a compact prototype of LumiCal in an electron test beam

Authors: H. Abramowicz, A. Abusleme, K. Afanaciev, Y. Benhammou, O. Borysov, M. Borysova, I. Bozovic- Jelisavcic, W. Daniluk, D. Dannheim, M. Demichev, K. Elsener, M. Firlej, E. Firu, T. Fiutowski, V. Ghenescu, M. Gostkin, M. Hempelb, H. Henschel, M. Idzik, A. Ignatenkoc, A. Ishikawa, A. Joffe, G. Kacarevic, S. Kananov, O. Karachebanb , et al. (29 additional authors not shown)

Abstract: A new design of a detector plane of sub-millimetre thickness for an electromagnetic sampling calorimeter is presented. It is intended to be used in the luminometers LumiCal and BeamCal in future linear $e^+e^-$ collider experiments. The detector planes were produced utilising novel connectivity scheme technologies. They were installed in a compact prototype of the calorimeter and tested at DESY wi… ▽ More A new design of a detector plane of sub-millimetre thickness for an electromagnetic sampling calorimeter is presented. It is intended to be used in the luminometers LumiCal and BeamCal in future linear $e^+e^-$ collider experiments. The detector planes were produced utilising novel connectivity scheme technologies. They were installed in a compact prototype of the calorimeter and tested at DESY with an electron beam of energy 1-5 GeV. The performance of a prototype of a compact LumiCal comprising eight detector planes was studied. The effective Moli`ere radius at 5 GeV was determined to be (8.1 +/- 0.1 (stat) +/- 0.3 (syst)) mm, a value well reproduced by the Monte Carlo (MC) simulation (8.4 +/- 0.1) mm. The dependence of the effective Moli`ere radius on the electron energy in the range 1-5 GeV was also studied. Good agreement was obtained between data and MC simulation. △ Less

Submitted 25 October, 2019; v1 submitted 29 December, 2018; originally announced December 2018.

Comments: 16 pages, 28 figures, Published in EPJC. Please note: Fig 16 in the published version us incorrect. The correct one appears in this replaced version

Journal ref: Eur. Phys. J. C79 (2019) 579

Alignment and resolution studies of a MARS scanner

Authors: A. P. Butler, P. H. Butler, S. T. Bell, G. Chelkov, M. Demichev, A. Gongadze, S. Kotov, D. Kozhevnikov, U. Kruchonak, I. Potrap, P. Smolyanskiy, A. Zhemchugov

Abstract: The MARS scanner is designed for the x-ray spectroscopic study of samples with the aid of computer tomography methods. Computer tomography allows the reconstruction of slices of an investigated sample using a set of shadow projections obtained for different angles. Projections in the MARS scanner are produced using a cone x-ray beam geometry. Correct reconstruction in this scheme requires precise… ▽ More The MARS scanner is designed for the x-ray spectroscopic study of samples with the aid of computer tomography methods. Computer tomography allows the reconstruction of slices of an investigated sample using a set of shadow projections obtained for different angles. Projections in the MARS scanner are produced using a cone x-ray beam geometry. Correct reconstruction in this scheme requires precise knowledge of several geometrical parameters of a tomograph, such as displacement of a rotation axis, x-ray source position with respect to a camera, and camera inclinations. Use of inaccurate parameters leads to a poor sample reconstruction. Non-ideal positioning of camera, x-ray source and cylindrical rotating frame (gantry) itself on which these parts are located, leads to the need for tomograph alignment. In this note we describe the alignment procedure that was used to get different geometrical corrections for the reconstruction. Also, several different estimations of the final spatial resolution for reconstructed images are presented. △ Less

Submitted 23 March, 2015; v1 submitted 29 January, 2015; originally announced January 2015.

Measurement of the energy resolution and calibration of hybrid pixel detectors with GaAs:Cr sensor and Timepix readout chip

Authors: A. P. Butler, P. H. Butler, S. T. Bell, G. A. Chelkov, D. V. Dedovich, M. A. Demichev, V. G. Elkin, M. I. Gostkin, S. A. Kotov, D. A. Kozhevnikov, U. G. Kruchonak, A. A. Nozdrin, S. Yu. Porokhovoy, I. N. Potrap, P. I. Smolyanskiy, M. M. Zakhvatkin, A. S. Zhemchugov

Abstract: This paper describes an iterative method of per-pixel energy calibration of hybrid pixel detectors with GaAs:Cr sensor and Timepix readout chip. A convolution of precisely measured spectra of characteristic X-rays of different metals with the resolution and the efficiency of the pixel detector is used for the calibration. The energy resolution of the detector is also measured during the calibratio… ▽ More This paper describes an iterative method of per-pixel energy calibration of hybrid pixel detectors with GaAs:Cr sensor and Timepix readout chip. A convolution of precisely measured spectra of characteristic X-rays of different metals with the resolution and the efficiency of the pixel detector is used for the calibration. The energy resolution of the detector is also measured during the calibration. The use of per-pixel calibration allows to achieve a good energy resolution of the Timepix detector with GaAs:Cr sensor: 8% and 13% at 60 keV and 20 keV, respectively. △ Less

Submitted 14 January, 2015; originally announced January 2015.