-
Simons Observatory: Broadband Metamaterial Anti-Reflection Cuttings for Large Aperture Alumina Optics
Authors:
Joseph E. Golec,
Shreya Sutariya,
Rebecca Jackson,
Jerry Zimmerman,
Simon R. Dicker,
Jeffrey Iuliano,
Jeff McMahon,
Giuseppe Puglisi,
Carole Tucker,
Edward J. Wollack
Abstract:
We present the design, fabrication, and measured performance of metamaterial Anti-Reflection Cuttings (ARCs) for large-format alumina filters operating over more than an octave of bandwidth to be deployed on the Simons Observatory (SO). The ARC consists of sub-wavelength features diced into the optic's surface using a custom dicing saw with near-micron accuracy. The designs achieve percent-level c…
▽ More
We present the design, fabrication, and measured performance of metamaterial Anti-Reflection Cuttings (ARCs) for large-format alumina filters operating over more than an octave of bandwidth to be deployed on the Simons Observatory (SO). The ARC consists of sub-wavelength features diced into the optic's surface using a custom dicing saw with near-micron accuracy. The designs achieve percent-level control over reflections at angles of incidence up to 20$^\circ$. The ARCs were demonstrated on four 42 cm diameter filters covering the 75-170 GHz band and a 50 mm diameter prototype covering the 200-300 GHz band. The reflection and transmission of these samples were measured using a broadband coherent source that covers frequencies from 20 GHz to 1.2 THz. These measurements demonstrate percent-level control over reflectance across the targeted pass-bands and a rapid reduction in transmission as the wavelength approaches the length scale of the metamaterial structure where scattering dominates the optical response. The latter behavior enables the use of the metamaterial ARC as a scattering filter in this limit.
△ Less
Submitted 10 October, 2022; v1 submitted 3 August, 2022;
originally announced August 2022.
-
Optical design concept of the CMB-S4 large-aperture telescopes and cameras
Authors:
Patricio A. Gallardo,
Bradford Benson,
John Carlstrom,
Simon R. Dicker,
Nick Emerson,
Jon E. Gudmundsson,
Richard Hills,
Michele Limon,
Jeff McMahon,
Michael D. Niemack,
Johanna M. Nagy,
Stephen Padin,
John Ruhl,
Sara M. Simon,
the CMB-S4 collaboration
Abstract:
CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the la…
▽ More
CMB-S4 -- the next-generation ground-based cosmic microwave background (CMB) experiment - will significantly advance the sensitivity of CMB measurements and improve our understanding of the origin and evolution of the universe. CMB-S4 will deploy large-aperture telescopes fielding hundreds of thousands of detectors at millimeter wavelengths. We present the baseline optical design concept of the large-aperture CMB-S4 telescopes, which consists of two optical configurations: (i) a new off-axis, three-mirror, free-form anastigmatic design and (ii) the existing coma-corrected crossed-Dragone design. We also present an overview of the optical configuration of the array of silicon optics cameras that will populate the focal plane with 85 diffraction-limited optics tubes covering up to 9 degrees of field of view, up to $1.1 \, \rm mm$ in wavelength. We describe the computational optimization methods that were put in place to implement the families of designs described here and give a brief update on the current status of the design effort.
△ Less
Submitted 20 July, 2022;
originally announced July 2022.
-
The Simons Observatory: Design and Measured Performance of a Carbon Fiber Strut for a Cryogenic Truss
Authors:
Kevin D. Crowley,
Peter Dow,
Jordan E. Shroyer,
John C. Groh,
Bradley Dober,
Jacob Spisak,
Nicholas Galitzki,
Tanay Bhandarkar,
Mark J. Devlin,
Simon Dicker,
Patricio A. Gallardo,
Kathleen Harrington,
Bradley R. Johnson,
Delwin Johnson,
Anna M. Kofman,
Akito Kusaka,
Adrian Lee,
Michele Limon,
Jeffrey Iuliano,
Federico Nati,
John Orlowski-Scherer,
Lyman Page,
Michael Randall,
Grant Teply,
Tran Tsan
, et al. (3 additional authors not shown)
Abstract:
We present the design and measured performance of a new carbon fiber strut design that is used in a cryogenically cooled truss for the Simons Observatory Small Aperture Telescope (SAT). The truss consists of two aluminum 6061 rings separated by 24 struts. Each strut consists of a central carbon fiber tube fitted with two aluminum end caps. We tested the performance of the strut and truss by (i) cr…
▽ More
We present the design and measured performance of a new carbon fiber strut design that is used in a cryogenically cooled truss for the Simons Observatory Small Aperture Telescope (SAT). The truss consists of two aluminum 6061 rings separated by 24 struts. Each strut consists of a central carbon fiber tube fitted with two aluminum end caps. We tested the performance of the strut and truss by (i) cryogenically cycling and destructively pull-testing strut samples, (ii) non-destructively pull-testing the final truss, and (iii) measuring the thermal conductivity of the carbon fiber tubes. We found that the strut strength is limited by the mounting fasteners and the strut end caps, not the epoxy adhesive or the carbon fiber tube. This result is consistent with our numerical predictions. Our thermal measurements suggest that the conductive heat load through the struts (from 4 K to 1 K) will be less than 1 mW. This strut design may be a promising candidate for use in other cryogenic support structures.
△ Less
Submitted 18 January, 2022; v1 submitted 16 January, 2022;
originally announced January 2022.
-
Studies of Systematic Uncertainties for Simons Observatory: Optical Effects and Sensitivity Considerations
Authors:
Patricio A. Gallardo,
Jon Gudmundsson,
Brian J. Koopman,
Frederick T. Matsuda,
Sara M. Simon,
Aamir Ali,
Sean Bryan,
Yuji Chinone,
Gabriele Coppi,
Nicholas Cothard,
Mark J. Devlin,
Simon Dicker,
Giulio Fabbian,
Nicholas Galitzki,
Charles A. Hill,
Brian Keating,
Akito Kusaka,
Jacob Lashner,
Adrian T. Lee,
Michele Limon,
Philip D. Mauskopf,
Jeff McMahon,
Federico Nati,
Michael D. Niemack,
John L. Orlowski-Scherer
, et al. (10 additional authors not shown)
Abstract:
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work i…
▽ More
The Simons Observatory (SO) is a new experiment that aims to measure the cosmic microwave background (CMB) in temperature and polarization. SO will measure the polarized sky over a large range of microwave frequencies and angular scales using a combination of small ($\sim0.5 \, \rm m$) and large ($\sim 6\, \rm m $) aperture telescopes and will be located in the Atacama Desert in Chile. This work is part of a series of papers studying calibration, sensitivity, and systematic errors for SO. In this paper, we discuss current efforts to model optical systematic effects, how these have been used to guide the design of the SO instrument, and how these studies can be used to inform instrument design of future experiments like CMB-S4. While optical systematics studies are underway for both the small aperture and large aperture telescopes, we limit the focus of this paper to the more mature large aperture telescope design for which our studies include: pointing errors, optical distortions, beam ellipticity, cross-polar response, instrumental polarization rotation and various forms of sidelobe pickup.
△ Less
Submitted 15 August, 2018;
originally announced August 2018.
-
An Open Source, FPGA-based LeKID readout for BLAST-TNG: Pre-flight Results
Authors:
Samuel Gordon,
Bradley Dober,
Adrian Sinclair,
Samuel Rowe,
Sean Bryan,
Philip Mauskopf,
Jason Austermann,
Mark Devlin,
Simon Dicker,
Jiansong Gao,
Gene C. Hilton,
Johannes Hubmayr,
Glenn Jones,
Jeffrey Klein,
Nathan P. Lourie,
Christopher McKenney,
Federico Nati,
Juan D. Soler,
Matthew Strader,
Michael Vissers
Abstract:
We present a highly frequency multiplexed readout for large-format superconducting detector arrays intended for use in the next generation of balloon-borne and space-based sub-millimeter and far-infrared missions. We will demonstrate this technology on the upcoming NASA Next Generation Balloon-borne Large Aperture Sub-millimeter Telescope (BLAST-TNG) to measure the polarized emission of Galactic d…
▽ More
We present a highly frequency multiplexed readout for large-format superconducting detector arrays intended for use in the next generation of balloon-borne and space-based sub-millimeter and far-infrared missions. We will demonstrate this technology on the upcoming NASA Next Generation Balloon-borne Large Aperture Sub-millimeter Telescope (BLAST-TNG) to measure the polarized emission of Galactic dust at wavelengths of 250, 350 and 500 microns. The BLAST-TNG receiver incorporates the first arrays of Lumped Element Kinetic Inductance Detectors (LeKID) along with the first microwave multiplexing readout electronics to fly in a space-like environment and will significantly advance the TRL for these technologies. After the flight of BLAST-TNG, we will continue to improve the performance of the detectors and readout electronics for the next generation of balloon-borne instruments and for use in a future FIR Surveyor.
△ Less
Submitted 16 November, 2016;
originally announced November 2016.
