Showing 1–50 of 113 results for author: Dong, Y

Study of the decay and production properties of $D_{s1}(2536)$ and $D_{s2}^*(2573)$

Authors: M. Ablikim, M. N. Achasov, P. Adlarson, O. Afedulidis, X. C. Ai, R. Aliberti, A. Amoroso, Q. An, Y. Bai, O. Bakina, I. Balossino, Y. Ban, H. -R. Bao, V. Batozskaya, K. Begzsuren, N. Berger, M. Berlowski, M. Bertani, D. Bettoni, F. Bianchi, E. Bianco, A. Bortone, I. Boyko, R. A. Briere, A. Brueggemann , et al. (645 additional authors not shown)

Abstract: The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be… ▽ More The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ processes are studied using data samples collected with the BESIII detector at center-of-mass energies from 4.530 to 4.946~GeV. The absolute branching fractions of $D_{s1}(2536)^- \rightarrow \bar{D}^{*0}K^-$ and $D_{s2}^*(2573)^- \rightarrow \bar{D}^0K^-$ are measured for the first time to be $(35.9\pm 4.8\pm 3.5)\%$ and $(37.4\pm 3.1\pm 4.6)\%$, respectively. The measurements are in tension with predictions based on the assumption that the $D_{s1}(2536)$ and $D_{s2}^*(2573)$ are dominated by a bare $c\bar{s}$ component. The $e^+e^-\rightarrow D_s^+D_{s1}(2536)^-$ and $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ cross sections are measured, and a resonant structure at around 4.6~GeV with a width of 50~MeV is observed for the first time with a statistical significance of $15σしぐま$ in the $e^+e^-\rightarrow D_s^+D^*_{s2}(2573)^-$ process. It could be the $Y(4626)$ found by the Belle collaboration in the $D_s^+D_{s1}(2536)^{-}$ final state, since they have similar masses and widths. There is also evidence for a structure at around 4.75~GeV in both processes. △ Less

Submitted 10 July, 2024; originally announced July 2024.

Optimal Low-Depth Quantum Signal-Processing Phase Estimation

Authors: Yulong Dong, Jonathan A. Gross, Murphy Yuezhen Niu

Abstract: Quantum effects like entanglement and coherent amplification can be used to drastically enhance the accuracy of quantum parameter estimation beyond classical limits. However, challenges such as decoherence and time-dependent errors hinder Heisenberg-limited amplification. We introduce Quantum Signal-Processing Phase Estimation algorithms that are robust against these challenges and achieve optimal… ▽ More Quantum effects like entanglement and coherent amplification can be used to drastically enhance the accuracy of quantum parameter estimation beyond classical limits. However, challenges such as decoherence and time-dependent errors hinder Heisenberg-limited amplification. We introduce Quantum Signal-Processing Phase Estimation algorithms that are robust against these challenges and achieve optimal performance as dictated by the Cramér-Rao bound. These algorithms use quantum signal transformation to decouple interdependent phase parameters into largely orthogonal ones, ensuring that time-dependent errors in one do not compromise the accuracy of learning the other. Combining provably optimal classical estimation with near-optimal quantum circuit design, our approach achieves an unprecedented standard deviation accuracy of $10^{-4}$ radians for estimating unwanted swap angles in superconducting two-qubit experiments, using low-depth ($<10$) circuits. This represents up to two orders of magnitude improvement over existing methods. Theoretically and numerically, we demonstrate the optimality of our algorithm against time-dependent phase errors, observing that the variance of the time-sensitive parameter $\varphi$ scales faster than the asymptotic Heisenberg scaling in the small-depth regime. Our results are rigorously validated against the quantum Fisher information, confirming our protocol's ability to achieve unmatched precision for two-qubit gate learning. △ Less

Submitted 17 June, 2024; originally announced July 2024.

Comments: 53 pages, 21 figures. arXiv admin note: substantial text overlap with arXiv:2209.11207

Silicon-integrated scandium-doped aluminum nitride electro-optic modulator

Authors: Tianqi Xu, Yushuai Liu, Yuanmao Pu, Yongxiang Yang, Qize Zhong, Xingyan Zhao, Yang Qiu, Yuan Dong, Tao Wu, Shaonan Zheng, Ting Hu

Abstract: Scandium-doped aluminum nitride (AlScN) with an asymmetric hexagonal wurtzite structure exhibits enhanced second-order nonlinear and piezoelectric properties compared to aluminum nitride (AlN), while maintaining a relatively large bandgap. It provides a promising platform for photonic integration and facilitates the seamless integration of passive and active functional devices. Here, we present th… ▽ More Scandium-doped aluminum nitride (AlScN) with an asymmetric hexagonal wurtzite structure exhibits enhanced second-order nonlinear and piezoelectric properties compared to aluminum nitride (AlN), while maintaining a relatively large bandgap. It provides a promising platform for photonic integration and facilitates the seamless integration of passive and active functional devices. Here, we present the design, fabrication, and characterization of AlScN EO micro-ring modulators, introducing active functionalities to the chip-scale AlScN platform. These waveguide-integrated EO modulators employ sputtered AlScN thin films as the light-guiding medium, and the entire fabrication process is compatible with complementary metal oxide semiconductor (CMOS) technology. We characterize the high-frequency performance of an AlScN modulator for the first time, extracting a maximum in-device effective EO coefficient of 2.86 pm/V at 12 GHz. The devices show a minimum half-wave voltage-length product of 3.12 V*cm and a 3-dB modulation bandwidth of approximately 22 GHz. Our work provides a promising modulation scheme for cost-effective silicon-integrated photonics systems. △ Less

Submitted 28 May, 2024; originally announced May 2024.

Integrated and DC-powered superconducting microcomb

Authors: Chen-Guang Wang, Wuyue Xu, Chong Li, Lili Shi, Junliang Jiang, Tingting Guo, Wen-Cheng Yue, Tianyu Li, Ping Zhang, Yang-Yang Lyu, Jiazheng Pan, Xiuhao Deng, Ying Dong, Xuecou Tu, Sining Dong, Chunhai Cao, Labao Zhang, Xiaoqing Jia, Guozhu Sun, Lin Kang, Jian Chen, Yong-Lei Wang, Huabing Wang, Peiheng Wu

Abstract: Frequency combs, specialized laser sources emitting multiple equidistant frequency lines, have revolutionized science and technology with unprecedented precision and versatility. Recently, integrated frequency combs are emerging as scalable solutions for on-chip photonics. Here, we demonstrate a fully integrated superconducting microcomb that is easy to manufacture, simple to operate, and consumes… ▽ More Frequency combs, specialized laser sources emitting multiple equidistant frequency lines, have revolutionized science and technology with unprecedented precision and versatility. Recently, integrated frequency combs are emerging as scalable solutions for on-chip photonics. Here, we demonstrate a fully integrated superconducting microcomb that is easy to manufacture, simple to operate, and consumes ultra-low power. Our turnkey apparatus comprises a basic nonlinear superconducting device, a Josephson junction, directly coupled to a superconducting microstrip resonator. We showcase coherent comb generation through self-started mode-locking. Therefore, comb emission is initiated solely by activating a DC bias source, with power consumption as low as tens of picowatts. The resulting comb spectrum resides in the microwave domain and spans multiple octaves. The linewidths of all comb lines can be narrowed down to 1 Hzへるつ through a unique coherent injection-locking technique. Our work represents a critical step towards fully integrated microwave photonics and offers the potential for integrated quantum processors. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Journal ref: Nature Communications 15, 4009 (2024)

Closeby Habitable Exoplanet Survey (CHES). I. Astrometric Noise and Planetary Detection Efficiency due to Stellar Spots and Faculae

Authors: Chunhui Bao, Jianghui Ji, Dongjie Tan, Guo Chen, Xiumin Huang, Su Wang, Yao Dong

Abstract: The Closeby Habitable Exoplanet Survey (CHES) is dedicated to the astrometric exploration for habitable-zone Earth-like planets orbiting solar-type stars in close proximity, achieving unprecedented micro-arcsecond precision. Given the elevated precision, thorough consideration of photocenter jitters induced by stellar activity becomes imperative. This study endeavors to model the stellar activity… ▽ More The Closeby Habitable Exoplanet Survey (CHES) is dedicated to the astrometric exploration for habitable-zone Earth-like planets orbiting solar-type stars in close proximity, achieving unprecedented micro-arcsecond precision. Given the elevated precision, thorough consideration of photocenter jitters induced by stellar activity becomes imperative. This study endeavors to model the stellar activity of solar-type stars, compute astrometric noise, and delineate the detection limits of habitable planets within the astrometric domain. Simulations were conducted for identified primary targets of CHES, involving the generation of simulated observed data for astrometry and photometry, accounting for the impact of stellar activity. Estimation of activity levels in our samples was achieved through chromospheric activity indices, revealing that over 90% of stars exhibited photocenter jitters below 1 $μみゅー\mathrm{as}$. Notably, certain proximate stars, such as $αあるふぁ$ Cen A and B, displayed more discernible noise arising from stellar activity. Subsequent tests were performed to evaluate detection performance, unveiling that stellar activity tends to have a less pronounced impact on planetary detectability for the majority of stars. Approximately 95% of targets demonstrated a detection efficiency exceeding 80%. However, for several cold stars, e.g., HD 32450 and HD 21531, with the habitable zones close to the stars, a reduction in detection efficiency was observed. These findings offer invaluable insights into the intricate interplay between stellar activity and astrometric precision, significantly advancing our understanding in the search for habitable planets. △ Less

Submitted 17 April, 2024; originally announced April 2024.

Comments: 18 pages, 10 figures, accepted for publication in AJ

Journal ref: The Astronomical Journal, Volume 167, Number 6, article id.286 (2024)

Event Detection from Social Media for Epidemic Prediction

Authors: Tanmay Parekh, Anh Mac, Jiarui Yu, Yuxuan Dong, Syed Shahriar, Bonnie Liu, Eric Yang, Kuan-Hao Huang, Wei Wang, Nanyun Peng, Kai-Wei Chang

Abstract: Social media is an easy-to-access platform providing timely updates about societal trends and events. Discussions regarding epidemic-related events such as infections, symptoms, and social interactions can be crucial for informing policymaking during epidemic outbreaks. In our work, we pioneer exploiting Event Detection (ED) for better preparedness and early warnings of any upcoming epidemic by de… ▽ More Social media is an easy-to-access platform providing timely updates about societal trends and events. Discussions regarding epidemic-related events such as infections, symptoms, and social interactions can be crucial for informing policymaking during epidemic outbreaks. In our work, we pioneer exploiting Event Detection (ED) for better preparedness and early warnings of any upcoming epidemic by developing a framework to extract and analyze epidemic-related events from social media posts. To this end, we curate an epidemic event ontology comprising seven disease-agnostic event types and construct a Twitter dataset SPEED with human-annotated events focused on the COVID-19 pandemic. Experimentation reveals how ED models trained on COVID-based SPEED can effectively detect epidemic events for three unseen epidemics of Monkeypox, Zika, and Dengue; while models trained on existing ED datasets fail miserably. Furthermore, we show that reporting sharp increases in the extracted events by our framework can provide warnings 4-9 weeks earlier than the WHO epidemic declaration for Monkeypox. This utility of our framework lays the foundations for better preparedness against emerging epidemics. △ Less

Submitted 24 May, 2024; v1 submitted 2 April, 2024; originally announced April 2024.

Comments: Accepted at NAACL 2024

Constructive agents nullify the ability of destructive agents to foster cooperation in public goods games

Authors: Yuting Dong, Zhixue He, Chen Shen, Lei Shi, Jun Tanimoto

Abstract: Existing studies have revealed a paradoxical phenomenon in public goods games, wherein destructive agents, harming both cooperators and defectors, can unexpectedly bolster cooperation. Building upon this intriguing premise, our paper introduces a novel concept: constructive agents, which confer additional benefits to both cooperators and defectors. We investigate the impact of these agents on coop… ▽ More Existing studies have revealed a paradoxical phenomenon in public goods games, wherein destructive agents, harming both cooperators and defectors, can unexpectedly bolster cooperation. Building upon this intriguing premise, our paper introduces a novel concept: constructive agents, which confer additional benefits to both cooperators and defectors. We investigate the impact of these agents on cooperation dynamics within the framework of public goods games. Employing replicator dynamics, we find that unlike destructive agents, the mere presence of constructive agents does not significantly alter the defective equilibrium. However, when the benefits from constructive agents are outweighed by the damage inflicted by destructive agents, the addition of constructive agents does not affect the ability of destructive agents to sustain cooperation. In this scenario, cooperators can be maintained through a cyclic dominance between cooperators, defectors, and destructive agents, with constructive agents adding complexity but not fundamentally changing the equilibrium. Conversely, if the benefits from constructive agents surpass the harm caused by destructive agents, the presence of constructive agents nullifies the ability of destructive agents to foster cooperation. Our results highlight the nuanced role of constructive agents in cooperation dynamics, emphasizing the necessity of carefully assessing incentive balances when encouraging cooperation. △ Less

Submitted 26 July, 2024; v1 submitted 2 April, 2024; originally announced April 2024.

Combinatorial split-ring and spiral meta-resonator for efficient magnon-photon coupling

Authors: Yuzan Xiong, Andrew Christy, Yun Dong, Andrew Comstock, Dali Sun, Yi Li, James F. Cahoon, Binbin Yang, Wei Zhang

Abstract: Developing hybrid materials and structures for electromagnetic wave engineering has been a promising route towards novel functionalities and tunabilities in many modern applications and perspectives in new quantum technologies. Despite its established success in engineering optical light and terahertz waves, the implementation of meta-resonators operating at the microwave band is still emerging, e… ▽ More Developing hybrid materials and structures for electromagnetic wave engineering has been a promising route towards novel functionalities and tunabilities in many modern applications and perspectives in new quantum technologies. Despite its established success in engineering optical light and terahertz waves, the implementation of meta-resonators operating at the microwave band is still emerging, especially those that allow for on-chip integration and size miniaturization, which has turned out crucial to developing hybrid quantum systems at the microwave band. In this work, we present a microwave meta-resonator consisting of split-ring and and spiral resonators, and implement it to the investigation of photon-magnon coupling for hybrid magnonic applications. We observe broadened bandwidth to the split ring modes augmented by the additional spiral resonator, and, by coupling the modes to a magnetic sample, the resultant photon-magnon coupling can be significantly enhanced to more than ten-fold. Our work suggests that combinatorial, hybrid microwave resonators may be a promising approach towards future development and implementation of photon-magnon coupling in hybrid magnonic systems. △ Less

Submitted 14 March, 2024; v1 submitted 22 February, 2024; originally announced February 2024.

Comments: 11 pages, 7 figures

Optically Levitated Nanoparticles as Receiving Antennas for Low Frequency Wireless Communication

Authors: Zhenhai Fu, Jinsheng Xu, Shaochong Zhu, Chaoxiong He, Xunming Zhu, Xiaowen Gao, Han Cai, Peitong He, Zhiming Chen, Yizhou Zhang, Nan Li, Xingfan Chen, Ying Dong, Shiyao Zhu, Cheng Liu, Huizhu Hu

Abstract: Low-frequency (LF) wireless communications play a crucial role in ensuring anti-interference, long-range, and efficient communication across various environments. However, in conventional LF communication systems, their antenna size is required to be inversely proportional to the wavelength, so that their mobility and flexibility are greatly limited. Here we introduce a novel prototype of LF recei… ▽ More Low-frequency (LF) wireless communications play a crucial role in ensuring anti-interference, long-range, and efficient communication across various environments. However, in conventional LF communication systems, their antenna size is required to be inversely proportional to the wavelength, so that their mobility and flexibility are greatly limited. Here we introduce a novel prototype of LF receiving antennas based on optically levitated nanoparticles, which overcomes the size-frequency limitation to reduce the antenna size to the hundred-nanometer scale. These charged particles are extremely sensitive to external electric field as mechanical resonators, and their resonant frequencies are adjustable. The effectiveness of these antennas was experimentally demonstrated by using the frequency shift keying (2FSK) modulation scheme. The experimental results indicate a correlation between error rate and factors such as transmission rate, signal strength, and vacuum degree with a signal strength of approximately 0.1V/m and a bit error rate below 0.1%. This advancement in leveraging levitated particle mechanical resonators (LPMRs) as LF antennas marks a significant stride in long-distance communication technology. △ Less

Submitted 10 January, 2024; originally announced February 2024.

Investigating and Controlling the Libration and Rotation Dynamics of Nanoparticles in an Optomechanical System

Authors: Chaoxiong He, Jinchuan Wang, Ying Dong, Shaochong Zhu, Qianwen Ying, Yuanyuan Ma, Fu Feng, Zhangqi Yin, Cuihong Li, Huizhu Hu

Abstract: In optomechanical systems, the libration and rotation of nanoparticles offer profound insights for ultrasensitive torque measurement and macroscopic quantum superpositions. Achievements include transitioning libration to rotation up to 6 GHz and cooling libration to millikelvin temperatures. It is undoubted that the libration and rotation are respectively driven by restoring and constant optical t… ▽ More In optomechanical systems, the libration and rotation of nanoparticles offer profound insights for ultrasensitive torque measurement and macroscopic quantum superpositions. Achievements include transitioning libration to rotation up to 6 GHz and cooling libration to millikelvin temperatures. It is undoubted that the libration and rotation are respectively driven by restoring and constant optical torques. The transition mechanisms between these two states, however, demand further exploration. In this perspective, it is demonstrated in this manuscript that monitoring lateral-scattered light allows real-time observation of libration/rotation transitions and associated hysteresis as ellipticities of trapping laser fields vary. By calculating optical torques and solving the Langevin equation, transitions are linked to the balance between anisotropic-polarization-induced sinusoidal optical torques and constant ones, with absorption identified as the main contributor to constant torques. These findings enable direct weak torque sensing and precise nanoparticle control in rotational degrees, paving the way for studying quantum effects like nonadiabatic phase shifts and macroscopic quantum superpositions, thereby enriching quantum optomechanics research. △ Less

Submitted 8 February, 2024; originally announced February 2024.

Head and Neck Tumor Segmentation from [18F]F-FDG PET/CT Images Based on 3D Diffusion Model

Authors: Yafei Dong, Kuang Gong

Abstract: Head and neck (H&N) cancers are among the most prevalent types of cancer worldwide, and [18F]F-FDG PET/CT is widely used for H&N cancer management. Recently, the diffusion model has demonstrated remarkable performance in various image-generation tasks. In this work, we proposed a 3D diffusion model to accurately perform H&N tumor segmentation from 3D PET and CT volumes. The 3D diffusion model was… ▽ More Head and neck (H&N) cancers are among the most prevalent types of cancer worldwide, and [18F]F-FDG PET/CT is widely used for H&N cancer management. Recently, the diffusion model has demonstrated remarkable performance in various image-generation tasks. In this work, we proposed a 3D diffusion model to accurately perform H&N tumor segmentation from 3D PET and CT volumes. The 3D diffusion model was developed considering the 3D nature of PET and CT images acquired. During the reverse process, the model utilized a 3D UNet structure and took the concatenation of PET, CT, and Gaussian noise volumes as the network input to generate the tumor mask. Experiments based on the HECKTOR challenge dataset were conducted to evaluate the effectiveness of the proposed diffusion model. Several state-of-the-art techniques based on U-Net and Transformer structures were adopted as the reference methods. Benefits of employing both PET and CT as the network input as well as further extending the diffusion model from 2D to 3D were investigated based on various quantitative metrics and the uncertainty maps generated. Results showed that the proposed 3D diffusion model could generate more accurate segmentation results compared with other methods. Compared to the diffusion model in 2D format, the proposed 3D model yielded superior results. Our experiments also highlighted the advantage of utilizing dual-modality PET and CT data over only single-modality data for H&N tumor segmentation. △ Less

Submitted 30 January, 2024; originally announced January 2024.

Comments: 28 pages, 5 figures

Enhanced αあるふぁ particle generation via proton-boron fusion reactions in laser-modulated plasma

Authors: Yihang Zhang, Zhe Zhang, Yufeng Dong, Ke Fang, Haochen Gu, Yu Dai, Wei Qi, Zhigang Deng, Xiaohui Zhang, Lei Yang, Feng Lu, Zheng Huang, Kainan Zhou, Yuchi Wu, Weimin Zhou, Feng Liu, Guoqiang Zhang, Bingjun Li, Xu Zhao, Xiaohui Yuan, Chen Wang, Yutong Li

Abstract: Aneutronic and nonradioactive properties make the proton-boron fusion a prospective candidate for fusion energy production through reactions following p+$^{11}$B$\rightarrow$3$αあるふぁ$ (p-$^{11}$B). However, it is difficult to achieve a thermal fusion ignition, since the low reaction cross-sections for center-of-mass energy below $\sim$100 keV. To realize fusion energy gain, it is essential to consider… ▽ More Aneutronic and nonradioactive properties make the proton-boron fusion a prospective candidate for fusion energy production through reactions following p+$^{11}$B$\rightarrow$3$αあるふぁ$ (p-$^{11}$B). However, it is difficult to achieve a thermal fusion ignition, since the low reaction cross-sections for center-of-mass energy below $\sim$100 keV. To realize fusion energy gain, it is essential to consider utilization of the maximum cross-section at the resonant peak of p-$^{11}$B fusion, and explore the nuclear reactions in plasma environment. In this work, p-$^{11}$B reactions triggered by interactions between energetic proton beams and laser-ablated boron plasma have been investigated. More than 200 times enhancement of $αあるふぁ$ particle emission efficiency (number ratio of escaping $αあるふぁ$ particles and boron nuclei) in plasma has been observed, compared with the cold boron. The proton beam transport path modulated by strong electro-magnetic fields in plasma could dominate the enhanced $αあるふぁ$ particle generation, due to a longer collisional length. In addition, an $αあるふぁ$ particle yield up to 1$\times$10$^{10}$ /sr has been measured via the pitcher-catcher scheme in plasma. This work could benefit understanding of the plasma effects on nuclear reaction dynamics, and also enable opportunities to explore physics in laser fusion associated with advanced fusion fuels. △ Less

Submitted 14 January, 2024; originally announced January 2024.

Geometry-enhanced Pre-training on Interatomic Potentials

Authors: Taoyong Cui, Chenyu Tang, Mao Su, Shufei Zhang, Yuqiang Li, Lei Bai, Yuhan Dong, Xingao Gong, Wanli Ouyang

Abstract: Machine learning interatomic potentials (MLIPs) enables molecular dynamics (MD) simulations with ab initio accuracy and has been applied to various fields of physical science. However, the performance and transferability of MLIPs are limited by insufficient labeled training data, which require expensive ab initio calculations to obtain the labels, especially for complex molecular systems. To addre… ▽ More Machine learning interatomic potentials (MLIPs) enables molecular dynamics (MD) simulations with ab initio accuracy and has been applied to various fields of physical science. However, the performance and transferability of MLIPs are limited by insufficient labeled training data, which require expensive ab initio calculations to obtain the labels, especially for complex molecular systems. To address this challenge, we design a novel geometric structure learning paradigm that consists of two stages. We first generate a large quantity of 3D configurations of target molecular system with classical molecular dynamics simulations. Then, we propose geometry-enhanced self-supervised learning consisting of masking, denoising, and contrastive learning to better capture the topology and 3D geometric information from the unlabeled 3D configurations. We evaluate our method on various benchmarks ranging from small molecule datasets to complex periodic molecular systems with more types of elements. The experimental results show that the proposed pre-training method can greatly enhance the accuracy of MLIPs with few extra computational costs and works well with different invariant or equivariant graph neural network architectures. Our method improves the generalization capability of MLIPs and helps to realize accurate MD simulations for complex molecular systems. △ Less

Submitted 12 April, 2024; v1 submitted 27 September, 2023; originally announced September 2023.

Journal ref: Published in Nature Machine Intelligence 2024

Spin injection across a III-V/chiral perovskite interface enabling spin accumulation at room temperature

Authors: Matthew P. Hautzinger, Xin Pan, Steven C. Hayden, Jiselle Y. Ye, Qi Jiang, Mickey J. Wilson, Yifan Dong, Emily K. Raulerson, Ian A. Leahy, Chun-Sheng Jiang, Joseph M. Luther, Yuan Lu, Katherine Jungjohann, Z. Valy Vardeny, Joseph J. Berry, Kirstin Alberi, Matthew C. Beard

Abstract: Spin accumulation in semiconductor structures at room temperature and without magnetic fields is key to enable a broader range of opto-electronic functionality. Current efforts are limited due to inherent inefficiencies associated with spin injection into semiconductor structures. Here, we demonstrate spin injection across chiral halide perovskite/III-V interfaces achieving spin accumulation in a… ▽ More Spin accumulation in semiconductor structures at room temperature and without magnetic fields is key to enable a broader range of opto-electronic functionality. Current efforts are limited due to inherent inefficiencies associated with spin injection into semiconductor structures. Here, we demonstrate spin injection across chiral halide perovskite/III-V interfaces achieving spin accumulation in a standard semiconductor III-V (AlxGa1-x)0.5In0.5P multiple quantum well (MQW) light emitting diode (LED). The spin accumulation in the MQW is detected via emission of circularly polarized light with a degree of polarization of up to ~15%. The chiral perovskite/III-V interface was characterized with X-ray photoemission spectroscopy (XPS), cross sectional scanning Kelvin probe force microscopy, and cross section transmission electron microscopy (TEM) imaging, showing a clean semiconductor/semiconductor interface where the fermi-level can equilibrate. These findings demonstrate chiral perovskite semiconductors can transform well-developed semiconductor platforms to ones that can also control spin. △ Less

Submitted 14 November, 2023; v1 submitted 8 September, 2023; originally announced September 2023.

Optimization of WLS fiber readout for the HERD calorimeter

Authors: X. Liu, Z. Quan, Y. W. Dong, M. Xu, J. J. Wang, R. J. Wang, Z. G. Wang, X. Z. Cui, T. W. Bao, C. L. Liao, J. F. Han, Y. Chen

Abstract: A novel 3-D calorimeter, composed of about 7500 LYSO cubes, is the key and crucial detector of the High Energy cosmic-Radiation Detection (HERD) facility to be installed onboard the China Space Station. Energy deposition from cosmic ray in each LYSO cube is translated by multiple wavelength shifting (WLS) fibers for multi-range data acquisition and real-time triggering. In this study, various me… ▽ More A novel 3-D calorimeter, composed of about 7500 LYSO cubes, is the key and crucial detector of the High Energy cosmic-Radiation Detection (HERD) facility to be installed onboard the China Space Station. Energy deposition from cosmic ray in each LYSO cube is translated by multiple wavelength shifting (WLS) fibers for multi-range data acquisition and real-time triggering. In this study, various methods of surface finish and encapsulation of the LYSO cube were investigated to optimize the amplitude from the WLS fiber end with the aim of improving the signal-to-noise ratio of Intensified scientific CMOS (IsCMOS) collection. The LYSO cube with five rough surfaces and a specular reflector achieves the maximum amplitude at the low-range fiber end, which is increased by roughly 44% compared to the polished cube with PTFE wrapping. The non-uniformity of amplitude at different positions on the LYSO cube surface was measured by X-ray and the positional correlation factor was derived for the entire cube. A simulation based on HERD CALO was conducted, which revealed that both the LYSO cube with five rough surfaces and the cube with rough bottom face exhibit superior energy resolution for electrons compared to the other two configurations. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Magnetic Field Draping in Induced Magnetospheres: Evidence from the MAVEN Mission to Mars

Authors: A. R. Azari, E. Abrahams, F. Sapienza, D. L. Mitchell, J. Biersteker, S. Xu, C. Bowers, F. Pérez, G. A. DiBraccio, Y. Dong, S. Curry

Abstract: The Mars Atmosphere and Volatile EvolutioN (MAVEN) mission has been orbiting Mars since 2014 and now has over 10,000 orbits which we use to characterize Mars' dynamic space environment. Through global field line tracing with MAVEN magnetic field data we find an altitude dependent draping morphology that differs from expectations of induced magnetospheres in the vertical ($\hat Z$ Mars Sun-state, M… ▽ More The Mars Atmosphere and Volatile EvolutioN (MAVEN) mission has been orbiting Mars since 2014 and now has over 10,000 orbits which we use to characterize Mars' dynamic space environment. Through global field line tracing with MAVEN magnetic field data we find an altitude dependent draping morphology that differs from expectations of induced magnetospheres in the vertical ($\hat Z$ Mars Sun-state, MSO) direction. We quantify this difference from the classical picture of induced magnetospheres with a Bayesian multiple linear regression model to predict the draped field as a function of the upstream interplanetary magnetic field (IMF), remanent crustal fields, and a previously underestimated induced effect. From our model we conclude that unexpected twists in high altitude dayside draping ($>$800 km) are a result of the IMF component in the $\pm \hat X$ MSO direction. We propose that this is a natural outcome of current theories of induced magnetospheres but has been underestimated due to approximations of the IMF as solely $\pm \hat Y$ directed. We additionally estimate that distortions in low altitude ($<$800 km) dayside draping along $\hat Z$ are directly related to remanent crustal fields. We show dayside draping traces down tail and previously reported inner magnetotail twists are likely caused by the crustal field of Mars, while the outer tail morphology is governed by an induced response to the IMF direction. We conclude with an updated understanding of induced magnetospheres which details dayside draping for multiple directions of the incoming IMF and discuss the repercussions of this draping for magnetotail morphology. △ Less

Submitted 20 October, 2023; v1 submitted 4 August, 2023; originally announced August 2023.

Comments: Accepted in Journal of Geophysical Research: Space Physics

High-fidelity achromatic metalens imaging via deep neural network

Authors: Yunxi Dong, Bowen Zheng, Hang Li, Hong Tang, Yi Huang, Sensong An, Hualiang Zhang

Abstract: Meta-optics are attracting intensive interest as alternatives to traditional optical systems comprising multiple lenses and diffractive elements. Among applications, single metalens imaging is highly attractive due to the potential for achieving significant size reduction and simplified design. However, single metalenses exhibit severe chromatic aberration arising from material dispersion and the… ▽ More Meta-optics are attracting intensive interest as alternatives to traditional optical systems comprising multiple lenses and diffractive elements. Among applications, single metalens imaging is highly attractive due to the potential for achieving significant size reduction and simplified design. However, single metalenses exhibit severe chromatic aberration arising from material dispersion and the nature of singlet optics, making them unsuitable for full-color imaging requiring achromatic performance. In this work, we propose and validate a deep learning-based single metalens imaging system to overcome chromatic aberration in varied scenarios. The developed deep learning networks computationally reconstruct raw imaging captures through reliably refocusing red, green and blue channels to eliminate chromatic aberration and enhance resolution without altering the metalens hardware. The networks demonstrate consistent enhancement across different aperture sizes and focusing distances. Images outside the training set and real-world photos were also successfully reconstructed. Our approach provides a new means to achieve achromatic metalenses without complex engineering, enabling practical and simplified implementation to overcome inherent limitations of meta-optics. △ Less

Submitted 31 July, 2023; originally announced August 2023.

STCF Conceptual Design Report: Volume 1 -- Physics & Detector

Authors: M. Achasov, X. C. Ai, R. Aliberti, L. P. An, Q. An, X. Z. Bai, Y. Bai, O. Bakina, A. Barnyakov, V. Blinov, V. Bobrovnikov, D. Bodrov, A. Bogomyagkov, A. Bondar, I. Boyko, Z. H. Bu, F. M. Cai, H. Cai, J. J. Cao, Q. H. Cao, Z. Cao, Q. Chang, K. T. Chao, D. Y. Chen, H. Chen , et al. (413 additional authors not shown)

Abstract: The Super $τたう$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τたう$-Charm factory -- the BEPCII,… ▽ More The Super $τたう$-Charm facility (STCF) is an electron-positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of $0.5\times 10^{35}{\rm cm}^{-2}{\rm s}^{-1}$ or higher. The STCF will produce a data sample about a factor of 100 larger than that by the present $τたう$-Charm factory -- the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R\&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R\&D and physics case studies. △ Less

Submitted 5 October, 2023; v1 submitted 28 March, 2023; originally announced March 2023.

Journal ref: Front. Phys. 19(1), 14701 (2024)

Resource-efficient Direct Characterization of General Density Matrix

Authors: Liang Xu, Mingti Zhou, Runxia Tao, Zhipeng Zhong, Ben Wang, Zhiyong Cao, Hongkuan Xia, Qianyi Wang, Hao Zhan, Aonan Zhang, Shang Yu, Nanyang Xu, Ying Dong, Changliang Ren, Lijian Zhang

Abstract: Sequential weak measurements allow the direct extraction of individual density-matrix elements instead of globally reconstructing the whole density matrix, opening a new avenue for the characterization of quantum systems. Nevertheless, the requirement of multiple coupling for each qudit of quantum systems and the lack of appropriate precision evaluation constraint its applicability extension, espe… ▽ More Sequential weak measurements allow the direct extraction of individual density-matrix elements instead of globally reconstructing the whole density matrix, opening a new avenue for the characterization of quantum systems. Nevertheless, the requirement of multiple coupling for each qudit of quantum systems and the lack of appropriate precision evaluation constraint its applicability extension, especially for multi-qudit quantum systems. Here, we propose a resource-efficient scheme (RES) to directly characterize the density matrix of general multi-qudit systems, which not only optimizes the measurements but also establishes a feasible estimation analysis. In this scheme, an efficient observable of quantum system is constructed such that a single meter state coupled to each qudit is sufficient to extract the corresponding density-matrix element. An appropriate model based on the statistical distribution of errors are used to evaluate the precision and feasibility of the scheme. We experimentally apply the RES to the direct characterization of general single-photon qutrit states and two-photon entangled states. The results show that the RES outperforms the sequential schemes in terms of efficiency and precision in both weak- and strong- coupling scenarios. This work sheds new light on the practical characterization of large-scale quantum systems and investigation of their non-classical properties. △ Less

Submitted 14 July, 2024; v1 submitted 13 March, 2023; originally announced March 2023.

Comments: 6 pages, 4 figures

Journal ref: Phys. Rev. Lett. 132, 030201 (2024)

Collective-motion-enhanced acceleration sensing via an optically levitated microsphere array

Authors: Yao Li, Chuang Li, Jiandong Zhang, Ying Dong, Huizhu Hu

Abstract: Optically levitated microspheres are an excellent candidate for force and acceleration sensing. Here, we propose an acceleration sensing protocol based on an optically levitated microsphere array (MSA). The system consists of an $N$-microsphere array levitated in a driven optical cavity via holographic optical tweezers. By positioning the microspheres suitably relative to the cavity, only one of t… ▽ More Optically levitated microspheres are an excellent candidate for force and acceleration sensing. Here, we propose an acceleration sensing protocol based on an optically levitated microsphere array (MSA). The system consists of an $N$-microsphere array levitated in a driven optical cavity via holographic optical tweezers. By positioning the microspheres suitably relative to the cavity, only one of the collective modes of the MSA is coupled to the cavity mode. The optomechanical interaction encodes the information of acceleration acting on the MSA onto the intracavity photons, which can then be detected directly at the output of the cavity. The optically levitated MSA forms an effective large mass-distributed particle, which not only circumvents the problem of levitating a large mass microsphere but also results in a significant improvement of sensitivity. Compared with the traditional single-microsphere measurement scheme, our method presents an improvement in sensitivity by a factor of $\sqrt{N}$. △ Less

Submitted 13 March, 2023; originally announced March 2023.

Realization of all-optical underdamped stochastic Stirling engine

Authors: Chuang Li, Shaochong Zhu, Peitong He, Yingying Wang, Yi Zheng, Kexin Zhang, Xiaowen Gao, Ying Dong, Huizhu Hu

Abstract: We experimentally demonstrate a nano-scale stochastic Stirling heat engine operating in the underdamped regime. The setup involves an optically levitated silica particle that is subjected to a power-varying optical trap and periodically coupled to a cold/hot reservoir via switching on/off active feedback cooling. We conduct a systematic investigation of the engine's performance and find that both… ▽ More We experimentally demonstrate a nano-scale stochastic Stirling heat engine operating in the underdamped regime. The setup involves an optically levitated silica particle that is subjected to a power-varying optical trap and periodically coupled to a cold/hot reservoir via switching on/off active feedback cooling. We conduct a systematic investigation of the engine's performance and find that both the output work and efficiency approach their theoretical limits under quasi-static conditions. Furthermore, we examine the dependence of the output work fluctuation on the cycle time and temperature difference between the hot and cold reservoirs. We observe that the distribution has a Gaussian profile in the quasi-static regime, whereas it becomes asymmetric and non-Gaussian as the cycle duration time decreases. This non-Gaussianity is qualitatively attributed to the strong correlation of the particle's position within a cycle in the non-equilibrium regime. Our experiments provide valuable insights into stochastic thermodynamics in the underdamped regime and open up new possibilities for the design of future nano-machines. △ Less

Submitted 12 March, 2023; originally announced March 2023.

GNOT: A General Neural Operator Transformer for Operator Learning

Authors: Zhongkai Hao, Zhengyi Wang, Hang Su, Chengyang Ying, Yinpeng Dong, Songming Liu, Ze Cheng, Jian Song, Jun Zhu

Abstract: Learning partial differential equations' (PDEs) solution operators is an essential problem in machine learning. However, there are several challenges for learning operators in practical applications like the irregular mesh, multiple input functions, and complexity of the PDEs' solution. To address these challenges, we propose a general neural operator transformer (GNOT), a scalable and effective t… ▽ More Learning partial differential equations' (PDEs) solution operators is an essential problem in machine learning. However, there are several challenges for learning operators in practical applications like the irregular mesh, multiple input functions, and complexity of the PDEs' solution. To address these challenges, we propose a general neural operator transformer (GNOT), a scalable and effective transformer-based framework for learning operators. By designing a novel heterogeneous normalized attention layer, our model is highly flexible to handle multiple input functions and irregular meshes. Besides, we introduce a geometric gating mechanism which could be viewed as a soft domain decomposition to solve the multi-scale problems. The large model capacity of the transformer architecture grants our model the possibility to scale to large datasets and practical problems. We conduct extensive experiments on multiple challenging datasets from different domains and achieve a remarkable improvement compared with alternative methods. Our code and data are publicly available at \url{https://github.com/thu-ml/GNOT}. △ Less

Submitted 14 June, 2023; v1 submitted 28 February, 2023; originally announced February 2023.

PigV$^2$: Monitoring Pig Vital Signs through Ground Vibrations Induced by Heartbeat and Respiration

Authors: Yiwen Dong, Jesse R Codling, Gary Rohrer, Jeremy Miles, Sudhendu Sharma, Tami Brown-Brandl, Pei Zhang, Hae Young Noh

Abstract: Pig vital sign monitoring (e.g., estimating the heart rate (HR) and respiratory rate (RR)) is essential to understand the stress level of the sow and detect the onset of parturition. It helps to maximize peri-natal survival and improve animal well-being in swine production. The existing approach mainly relies on manual measurement, which is labor-intensive and only provides a few points of informa… ▽ More Pig vital sign monitoring (e.g., estimating the heart rate (HR) and respiratory rate (RR)) is essential to understand the stress level of the sow and detect the onset of parturition. It helps to maximize peri-natal survival and improve animal well-being in swine production. The existing approach mainly relies on manual measurement, which is labor-intensive and only provides a few points of information. Other sensing modalities such as wearables and cameras are developed to enable more continuous measurement, but are still limited due to animal discomfort, data transfer, and storage challenges. In this paper, we introduce PigV$^2$, the first system to monitor pig heart rate and respiratory rate through ground vibrations. Our approach leverages the insight that both heartbeat and respiration generate ground vibrations when the sow is lying on the floor. We infer vital information by sensing and analyzing these vibrations. The main challenge in developing PigV$^2$ is the overlap of vital- and non-vital-related information in the vibration signals, including pig movements, pig postures, pig-to-sensor distances, and so on. To address this issue, we first characterize their effects, extract their current status, and then reduce their impact by adaptively interpolating vital rates over multiple sensors. PigV$^2$ is evaluated through a real-world deployment with 30 pigs. It has 3.4% and 8.3% average errors in monitoring the HR and RR of the sows, respectively. △ Less

Submitted 6 December, 2022; originally announced December 2022.

Comments: 7 pages, 9 figures

Optimization of transition behaviors in a two-lane system

Authors: Yuming Dong, Xiaolu Jia, Daichi Yanagisawa, Akihito Nagahama, Katsuhiro Nishinari

Abstract: Transitions between two lanes often have a significant impact on various forms of road traffic. To address this problem, we have developed a two-lane asymmetric simple exclusion process model and two hypothetical traffic control strategies, to simulate a futuristic scenario where the timing and location of transitions between two lanes are highly controlled. Various scenarios were proposed to stud… ▽ More Transitions between two lanes often have a significant impact on various forms of road traffic. To address this problem, we have developed a two-lane asymmetric simple exclusion process model and two hypothetical traffic control strategies, to simulate a futuristic scenario where the timing and location of transitions between two lanes are highly controlled. Various scenarios were proposed to study the effectiveness of these control strategies. An optimized control strategy, whose parameters were determined through an optimization algorithm, is confirmed to effectively maximize the average traffic flow. Consequently, we may identify suitable road sections and the corresponding timings of transitions to resolve congestion in this model. △ Less

Submitted 4 December, 2022; originally announced December 2022.

Journal ref: Physica A: Statistical Mechanics and its Applications, 2022: 128315

Track-based alignment for the BESIII CGEM detector in the cosmic-ray test

Authors: A. Q. Guo, L. H. Wu, L. L. Wang, R. E. Mitchell, A. Amoroso, R. Baldini Ferroli, I. Balossino, M. Bertani, D. Bettoni, F. Bianchi, A. Bortone, G. Cibinetto, A. Cotta Ramusino, F. Cossio, M. Y. Dong, M. Da Rocha Rolo, F. De Mori, M. Destefanis, J. Dong, F. Evangelisti, R. Farinelli, L. Fava, G. Felici, I. Garzia, M. Gatta , et al. (27 additional authors not shown)

Abstract: The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector operating on the Beijing Electron Positron Collider II (BEPCII). After more than ten year's operation, the efficiency of the inner layers of the Main Drift Chamber (MDC) decreased significantly. To solve this issue, the BESIII collaboration is planning to replace the inner part of the MDC with three layers of Cylindrical tri… ▽ More The Beijing Electron Spectrometer III (BESIII) is a multipurpose detector operating on the Beijing Electron Positron Collider II (BEPCII). After more than ten year's operation, the efficiency of the inner layers of the Main Drift Chamber (MDC) decreased significantly. To solve this issue, the BESIII collaboration is planning to replace the inner part of the MDC with three layers of Cylindrical triple Gas Electron Multipliers (CGEM). The transverse plane spatial resolution of CGEM is required to be 120 $μみゅー$m or better. To meet this goal, a careful calibration of the detector is necessary to fully exploit the potential of the CGEM detector. In all the calibrations, the detector alignment plays an important role to improve the detector precision. The track-based alignment for the CGEM detector with the Millepede algorithm is implemented to reduce the uncertainties of the hit position measurement. Using the cosmic-ray data taken in 2020 with the two layers setup, the displacement and rotation of the outer layer with respect to the inner layer is determined by a simultaneous fit applied to more than 160000 tracks. A good alignment precision has been achieved that guarantees the design request could be satisfied in the future. A further alignment is going to be performed using the combined information of tracks from cosmic-ray and collisions after the CGEM is installed into the BESIII detector. △ Less

Submitted 14 December, 2022; v1 submitted 2 November, 2022; originally announced November 2022.

Beam Background Simulation and Experiment at BEPCII

Authors: H. C . Shi, B. Wang, H. Y. Shi, C. H. Yu, M. Y. Dong, H. P. Peng

Abstract: A high-level beam background is a crucial challenge to future upgrades to the BEPCII collider. We report on the first separate measurement of the main beam background components at BEPCII. The separation measurement enables the beam background extrapolation towards the beam parameters assumed for the upgraded BEPCII. The measured rates of each background component are also compared with a brand-ne… ▽ More A high-level beam background is a crucial challenge to future upgrades to the BEPCII collider. We report on the first separate measurement of the main beam background components at BEPCII. The separation measurement enables the beam background extrapolation towards the beam parameters assumed for the upgraded BEPCII. The measured rates of each background component are also compared with a brand-new simulation based on SAD and Geant4. The discrepancy between experiment and simulation remains 1$\sim$2 magnitudes after calibration with beam lifetime, which should be further investigated. △ Less

Submitted 7 February, 2023; v1 submitted 21 October, 2022; originally announced October 2022.

Full-Dimensional Spatial Light Meta-modulators

Authors: Jinwei Zeng, Jinrun Zhang, Yajuan Dong, Jian Wang

Abstract: The full-dimensional spatial light meta-modulator requires simultaneous, arbitrary and independent manipulation of spatial phase, amplitude, and polarization. It is an essential step towards harnessing complete dimensional resources of light. However, full-dimensional meta-modulation can be challenging due to the need of multiple independent control factors. To address this challenge, here we prop… ▽ More The full-dimensional spatial light meta-modulator requires simultaneous, arbitrary and independent manipulation of spatial phase, amplitude, and polarization. It is an essential step towards harnessing complete dimensional resources of light. However, full-dimensional meta-modulation can be challenging due to the need of multiple independent control factors. To address this challenge, here we propose parallel-tasking geometric phase metasurfaces. Indeed, the broadband geometric phase of meta-atoms is divided into several sub-phases, each of which serves as an independent control factor to manipulate light phase, amplitude, and polarization through geometric phase, interference, and orthogonal polarization beam superposition, respectively. Therefore, the macroscopic group of meta-atoms leads to the metasurfaces that can achieve the broadband full-dimensional spatial light meta-modulation. Finally, we fabricate and experimentally demonstrate the meta-modulator that generates special structured light beams with original or modified diffractions, as the signature of spatial phase, amplitude and polarization modulation. This approach paves the way to future wide applications of light manipulation enabled by the full-dimensional spatial light meta-modulators. △ Less

Submitted 25 August, 2022; originally announced August 2022.

Comments: 16 pages, 5 figures

Development of the photo-diode subsystem for the HERD calorimeter double-readout

Authors: O. Adriani, M. Antonelli, A. Basti, E. Berti, P. Betti, G. Bigongiari, L. Bonechi, M. Bongi, V. Bonvicini, S. Bottai, P. Brogi, G. Castellini, C. Checchia, J. Casaus, X. Cui, Y. Dong, R. D'Alessandro, S. Detti, F. Giovacchini, N. Finetti, P. Maestro, P. S. Marrocchesi, X. Liu, J. Marin, G. Martinez , et al. (18 additional authors not shown)

Abstract: The measurement of cosmic-ray individual spectra provides unique information regarding the origin and propagation of astro-particles. Due to the limited acceptance of current space experiments, protons and nuclei around the "knee" region ($\sim1\ PeV$) can only be observed by ground based experiments. Thanks to an innovative design, the High Energy cosmic-Radiation Detection (HERD) facility will a… ▽ More The measurement of cosmic-ray individual spectra provides unique information regarding the origin and propagation of astro-particles. Due to the limited acceptance of current space experiments, protons and nuclei around the "knee" region ($\sim1\ PeV$) can only be observed by ground based experiments. Thanks to an innovative design, the High Energy cosmic-Radiation Detection (HERD) facility will allow direct observation up to this energy region: the instrument is mainly based on a 3D segmented, isotropic and homogeneous calorimeter which properly measures the energy of particles coming from each direction and it will be made of about 7500 LYSO cubic crystals. The read-out of the scintillation light is done with two independent systems: the first one based on wave-length shifting fibers coupled to Intensified scientific CMOS cameras, the second one is made of two photo-diodes with different active areas connected to a custom front-end electronics. This photo-diode system is designed to achieve a huge dynamic range, larger than $10^7$, while having a small power consumption, few mW per channel. Thanks to a good signal-to-noise ratio, the capability of a proper calibration, by using signals of both non-interacting and showering particles, is also guaranteed. In this paper, the current design and the performance obtained by several tests of the photo-diode read-out system are discussed. △ Less

Submitted 8 August, 2022; originally announced August 2022.

Journal ref: JINST 17 P09002 (2022)

Exact Solution for Elastic Networks on Curved Surfaces

Authors: Yinan Dong, Roya Zandi, Alex Travesset

Abstract: The problem of characterizing the structure of an elastic network constrained to lie on a frozen curved surface appears in many areas of science and has been addressed by many different approaches, most notably, extending linear elasticity or through effective defect interaction models. In this paper, we show that the problem can be solved by considering non-linear elasticity in an exact form with… ▽ More The problem of characterizing the structure of an elastic network constrained to lie on a frozen curved surface appears in many areas of science and has been addressed by many different approaches, most notably, extending linear elasticity or through effective defect interaction models. In this paper, we show that the problem can be solved by considering non-linear elasticity in an exact form without resorting to any approximation in terms of geometric quantities. In this way, we are able to consider different effects that have been unwieldy or not viable to include in the past, such as a finite line tension, explicit dependence on the Poisson ratio or the determination of the particle positions for the entire lattice. Several geometries with rotational symmetry are solved explicitly. Comparison with linear elasticity reveals an agreement that extends beyond its strict range of applicability. Implications for the problem of the characterization of virus assembly are also discussed. △ Less

Submitted 7 August, 2022; originally announced August 2022.

Comments: 5 figures and 8 pages for the main paper. 4 figures and 11 pages for supplementary information

Atomically imprinted graphene plasmonic cavities

Authors: Brian S. Y. Kim, Aaron J. Sternbach, Min Sup Choi, Zhiyuan Sun, Francesco L. Ruta, Yinming Shao, Alexander S. McLeod, Lin Xiong, Yinan Dong, Anjaly Rajendran, Song Liu, Ankur Nipane, Sang Hoon Chae, Amirali Zangiabadi, Xiaodong Xu, Andrew J. Millis, P. James Schuck, Cory. R. Dean, James C. Hone, D. N. Basov

Abstract: Plasmon polaritons in van der Waals (vdW) materials hold promise for next-generation photonics. The ability to deterministically imprint spatial patterns of high carrier density in cavities and circuitry with nanoscale features underlies future progress in nonlinear nanophotonics and strong light-matter interactions. Here, we demonstrate a general strategy to atomically imprint low-loss graphene p… ▽ More Plasmon polaritons in van der Waals (vdW) materials hold promise for next-generation photonics. The ability to deterministically imprint spatial patterns of high carrier density in cavities and circuitry with nanoscale features underlies future progress in nonlinear nanophotonics and strong light-matter interactions. Here, we demonstrate a general strategy to atomically imprint low-loss graphene plasmonic structures using oxidation-activated charge transfer (OCT). We cover graphene with a monolayer of WSe$_2$, which is subsequently oxidized into high work-function WOx to activate charge transfer. Nano-infrared imaging reveals low-loss plasmon polaritons at the WOx/graphene interface. We insert WSe$_2$ spacers to precisely control the OCT-induced carrier density and achieve a near-intrinsic quality factor of plasmons. Finally, we imprint canonical plasmonic cavities exhibiting laterally abrupt doping profiles with single-digit nanoscale precision via programmable OCT. Specifically, we demonstrate technologically appealing but elusive plasmonic whispering-gallery resonators based on free-standing graphene encapsulated in WOx. Our results open avenues for novel quantum photonic architectures incorporating two-dimensional materials. △ Less

Submitted 25 June, 2022; originally announced June 2022.

Comments: 17 pages, 4 figures

Multi-core fiber enabled fading noise suppression in φふぁい-OFDR based quantitative distributed vibration sensing

Authors: Yuxiang Feng, Weilin Xie, Yinxia Meng, Jiang Yang, Qiang Yang, Yan Ren, Tianwai Bo, Zhongwei Tan, Wei Wei, Yi Dong

Abstract: Coherent fading has been regarded as a critical issue in phase-sensitive optical frequency domain reflectometry (φふぁい-OFDR) based distributed fiber-optic sensing. Here, we report on an approach for fading noise suppression in φふぁい-OFDR with multi-core fiber. By exploiting the independent nature of the randomness in the distribution of reflective index in each of the cores, the drastic phase fluctuations… ▽ More Coherent fading has been regarded as a critical issue in phase-sensitive optical frequency domain reflectometry (φふぁい-OFDR) based distributed fiber-optic sensing. Here, we report on an approach for fading noise suppression in φふぁい-OFDR with multi-core fiber. By exploiting the independent nature of the randomness in the distribution of reflective index in each of the cores, the drastic phase fluctuations due to the fading phenomina can be effectively alleviated by applying weighted vectorial averaging for the Rayleigh backscattering traces from each of the cores with distinct fading distributions. With the consistent linear response with respect to external excitation of interest for each of the cores, demonstration for the propsoed φふぁい-OFDR with a commercial seven-core fiber has achieved highly sensitive quantitative distributed vibration sensing with about 2.2 nm length precision and 2 cm sensing resolution along the 500 m fiber, corresponding to a range resolution factor as high as about about 4E-5. Featuring long distance, high sensitivity, high resolution, and fading robustness, this approach has shown promising potentials in various sensing techniques for a wide range of practical scenarios. △ Less

Submitted 3 May, 2022; originally announced May 2022.

Comments: 4 pages

Ground state preparation and energy estimation on early fault-tolerant quantum computers via quantum eigenvalue transformation of unitary matrices

Authors: Yulong Dong, Lin Lin, Yu Tong

Abstract: Under suitable assumptions, the algorithms in [Lin, Tong, Quantum 2020] can estimate the ground state energy and prepare the ground state of a quantum Hamiltonian with near-optimal query complexities. However, this is based on a block encoding input model of the Hamiltonian, whose implementation is known to require a large resource overhead. We develop a tool called quantum eigenvalue transformati… ▽ More Under suitable assumptions, the algorithms in [Lin, Tong, Quantum 2020] can estimate the ground state energy and prepare the ground state of a quantum Hamiltonian with near-optimal query complexities. However, this is based on a block encoding input model of the Hamiltonian, whose implementation is known to require a large resource overhead. We develop a tool called quantum eigenvalue transformation of unitary matrices with real polynomials (QET-U), which uses a controlled Hamiltonian evolution as the input model, a single ancilla qubit and no multi-qubit control operations, and is thus suitable for early fault-tolerant quantum devices. This leads to a simple quantum algorithm that outperforms all previous algorithms with a comparable circuit structure for estimating the ground state energy. For a class of quantum spin Hamiltonians, we propose a new method that exploits certain anti-commutation relations and further removes the need of implementing the controlled Hamiltonian evolution. Coupled with Trotter based approximation of the Hamiltonian evolution, the resulting algorithm can be very suitable for early fault-tolerant quantum devices. We demonstrate the performance of the algorithm using IBM Qiskit for the transverse field Ising model. If we are further allowed to use multi-qubit Toffoli gates, we can then implement amplitude amplification and a new binary amplitude estimation algorithm, which increases the circuit depth but decreases the total query complexity. The resulting algorithm saturates the near-optimal complexity for ground state preparation and energy estimating using a constant number of ancilla qubits (no more than 3). △ Less

Submitted 18 October, 2022; v1 submitted 12 April, 2022; originally announced April 2022.

Journal ref: PRX Quantum 3, 040305 (2022)

Mamba: a systematic software solution for beamline experiments at HEPS

Authors: Yu Liu, Yan-Da Geng, Xiao-Xue Bi, Xiang Li, Ye Tao, Jian-She Cao, Yu-Hui Dong, Yi Zhang

Abstract: To cater for the diverse experiment requirements at the High Energy Photon Source (HEPS) with often limited human resources, Bluesky is chosen as the basis for our software framework, Mamba. In our attempt to address Bluesky's lack of integrated GUIs, command injection with feedback is chosen as the main way for the GUIs to cooperate with the CLI; a RPC service is provided, which also covers funct… ▽ More To cater for the diverse experiment requirements at the High Energy Photon Source (HEPS) with often limited human resources, Bluesky is chosen as the basis for our software framework, Mamba. In our attempt to address Bluesky's lack of integrated GUIs, command injection with feedback is chosen as the main way for the GUIs to cooperate with the CLI; a RPC service is provided, which also covers functionalities unsuitable for command injection, as well as pushing of status updates. In order to fully support high-frequency applications like fly scans, Bluesky's support for asynchronous control is being improved; to support high-throughput experiments, Mamba Data Worker (MDW) is being developed to cover the complexity in asynchronous online data processing for these experiments. To systematically simplify the specification of metadata, scan parameters and data-processing graphs for each type of experiments, an experiment parameter generator (EPG) will be developed; experiment-specific modules to automate preparation steps will also be made. The integration of off-the-shelf code in Mamba for domain-specific needs is under investigation, and Mamba GUI Studio (MGS) is being developed to simplify the implementation and integration of GUIs. △ Less

Submitted 28 March, 2022; originally announced March 2022.

Comments: 9 pages, 6 figures, accepted for J. Synchrotron Rad

Journal ref: J. Synchrotron Rad. 2022, 29(3), 664-669

Nii: a Bayesian orbit retrieval code applied to differential astrometry

Authors: Sheng Jin, Xiaojian Ding, Su Wang, Yao Dong, Jianghui Ji

Abstract: Here we present an open source Python-based Bayesian orbit retrieval code (Nii) that implements an automatic parallel tempering Markov chain Monte Carlo (APT-MCMC) strategy. Nii provides a module to simulate the observations of a space-based astrometry mission in the search for exoplanets, a signal extraction process for differential astrometric measurements using multiple reference stars, and an… ▽ More Here we present an open source Python-based Bayesian orbit retrieval code (Nii) that implements an automatic parallel tempering Markov chain Monte Carlo (APT-MCMC) strategy. Nii provides a module to simulate the observations of a space-based astrometry mission in the search for exoplanets, a signal extraction process for differential astrometric measurements using multiple reference stars, and an orbital parameter retrieval framework using APT-MCMC. We further verify the orbit retrieval ability of the code through two examples corresponding to a single-planet system and a dual-planet system. In both cases, efficient convergence on the posterior probability distribution can be achieved. Although this code specifically focuses on the orbital parameter retrieval problem of differential astrometry, Nii can also be widely used in other Bayesian analysis applications. △ Less

Submitted 12 November, 2021; originally announced November 2021.

Comments: Accepted for publication in MNRAS

Coherence analysis of beamline and simulation of coherent X-ray diffraction imaging based on a coherent modes model

Authors: Han Xu, Zhongzhu Zhu, Peng Liu, Yuhui Dong, Liang Zhou

Abstract: The evolution from 3rd to 4th generation synchrotron radiation (SR) sources significantly enhanced their coherence, making coherent scattering techniques such as coherent X-ray diffraction imaging (CXDI) and X-ray photon correlation spectroscopy (XPCS) more accessible. We take advantage of a coherent modes decomposition and propagation model to carry out coherence analysis and simulations of CXDI… ▽ More The evolution from 3rd to 4th generation synchrotron radiation (SR) sources significantly enhanced their coherence, making coherent scattering techniques such as coherent X-ray diffraction imaging (CXDI) and X-ray photon correlation spectroscopy (XPCS) more accessible. We take advantage of a coherent modes decomposition and propagation model to carry out coherence analysis and simulations of CXDI experiments for the coherent Hard X-ray Coherent Scattering (HXCS) beamline at High Energy Photon Source. △ Less

Submitted 13 October, 2021; originally announced October 2021.

Comments: 26 pages, 13 figures

The Design of Programmable Transmitarray with Independent Controls of Transmission Amplitude and Phase

Authors: He Li, Yun Bo Li, Chao Yue Gong, Shu Yue Dong, Shi Yu Wang, Hai Peng Wang, Tie Jun Cui

Abstract: A design method of programmable transmitarray with independent controls of transmission amplitude and phase is proposed in C-band. The unit cell with cascaded structures mainly consists of four parts, including the receiving antenna, reconfigurable attenuator with PIN diodes, reconfigurable phase shifter with varactors and transmitting antenna. Correspondingly, various manipulations of spatial ele… ▽ More A design method of programmable transmitarray with independent controls of transmission amplitude and phase is proposed in C-band. The unit cell with cascaded structures mainly consists of four parts, including the receiving antenna, reconfigurable attenuator with PIN diodes, reconfigurable phase shifter with varactors and transmitting antenna. Correspondingly, various manipulations of spatial electromagnetic (EM) fields are achieved by varying the bias voltages of PIN diodes and varactors in the transmitarray. The fabricated unit cell is measured in a standard waveguide, and the whole array with 8*8 unit cells is measured with two horns for calibration of the programmable EM features. The experimental results show that the transmission magnitude can range from -16 dBでしべる to -3.6 dBでしべる and the transmission phase achieves 270-degree coverage independently under the 16-bit programmable control. To further exhibit the capability and functionality of the proposed transmitarray, the waveform engineering of adaptive beamforming and power-allocation beamforming are separately realized in the experiment. The measured results have good agreements with our theoretical calculations, verifying the validity of our design method. △ Less

Submitted 17 September, 2021; originally announced September 2021.

Melting a Rydberg ice to a topological spin liquid with cavity vacuum fluctuation

Authors: H. R. Kong, J. Taylor, Y. Dong, K. S. Choi

Abstract: Quantum spin liquids are exotic phases of matter that are prevented from being frozen even at zero temperature, and appear disordered by local probes that monitor the subsystems. Driven by quantum fluctuations, topological spin liquids are manifested by their long-range entanglement, and are characterized by quasiparticles with fractional statistics. Here, we make contact of a 2D Rydberg ice to a… ▽ More Quantum spin liquids are exotic phases of matter that are prevented from being frozen even at zero temperature, and appear disordered by local probes that monitor the subsystems. Driven by quantum fluctuations, topological spin liquids are manifested by their long-range entanglement, and are characterized by quasiparticles with fractional statistics. Here, we make contact of a 2D Rydberg ice to a QED vacuum of an ultra-high-finesse optical cavity, and dynamically promote the frustrated background field of the spin ice to a $\mathbb{Z}_2$ spin liquid. We characterize the deconfined nature of the dynamical gauge theory residing in the strongly-correlated Rydberg matter with Wilsonian loops. We observe the proliferation of vison and spinon pairs by site-resolved fluorescence imaging, and detect the exchange statistical angle $θしーた_{\text{top}}\simπぱい/2$ between the two anyons by monitoring the dynamical correlators of the fluctuating cavity photons. Our work provides the first microscopic detection of anyons in a topological quantum matter, and heralds the arrival of strongly-coupled many-body QED, where interacting matter and light are put on equal footing at the level of individual quanta. △ Less

Submitted 17 November, 2021; v1 submitted 8 September, 2021; originally announced September 2021.

Comments: This preprint is withdrawn due to incorrect result

Force Detection Sensitivity Spectrum Calibration of Levitated Nanomechanical Sensor Using Harmonic Coulomb Force

Authors: Zhenhai Fu, Shaochong Zhu, Ying Dong, Xingfan Chen, Huizhu Hu, Xiaowen Gao

Abstract: Oscillators based on levitated particles are promising for the development of ultrasensitive force detectors. The theoretical performance of levitated nanomechanical sensors is usually characterized by the so-called thermal noise limit force detection sensitivity, which does not exhibit spectral specificity in practical measurements. To characterize the actual detection performance, we propose a m… ▽ More Oscillators based on levitated particles are promising for the development of ultrasensitive force detectors. The theoretical performance of levitated nanomechanical sensors is usually characterized by the so-called thermal noise limit force detection sensitivity, which does not exhibit spectral specificity in practical measurements. To characterize the actual detection performance, we propose a method for the force detection sensitivity calibration of a levitated nanomechanical sensor based on the harmonic Coulomb force. Utilizing the measured transfer function, we obtained the force detection sensitivity spectrum from the position spectrum. Although the thermal noise limit force detection sensitivity of the system reached $\rm\left( {4.39 \pm 0.62} \right) \times {10^{ - 20}} N/H{z^{1/2}}$ at $\rm{2.4\times10^{-6} mbar}$ with feedback cooling, the measured sensitivity away from the resonance was of the order of $\rm10^{-17} N/Hz^{1/2}$ based on the existing detection noise level. The calibration method established in our study is applicable to the performance evaluation of any optical levitation system for high-sensitivity force measurements. △ Less

Submitted 31 August, 2021; originally announced September 2021.

Revealing complex optical phenomena through vectorial metrics

Authors: Chao He, Jintao Chang, Patrick S. Salter, Yuanxing Shen, Ben Dai, Pengcheng Li, Yihan Jin, Samlan Chandran Thodika, Mengmeng Li, Aziz Tariq, Jingyu Wang, Jacopo Antonello, Yang Dong, Ji Qi, Jianyu Lin, Honghui He, Daniel S. Elson, Min Zhang, Hui Ma, Martin J. Booth

Abstract: Advances in vectorial polarisation-resolved imaging are bringing new capabilities to applications ranging from fundamental physics through to clinical diagnosis. Imaging polarimetry requires determination of the Mueller matrix (MM) at every point, providing a complete description of an object's vectorial properties. Despite forming a comprehensive representation, the MM does not usually provide ea… ▽ More Advances in vectorial polarisation-resolved imaging are bringing new capabilities to applications ranging from fundamental physics through to clinical diagnosis. Imaging polarimetry requires determination of the Mueller matrix (MM) at every point, providing a complete description of an object's vectorial properties. Despite forming a comprehensive representation, the MM does not usually provide easily-interpretable information about the object's internal structure. Certain simpler vectorial metrics are derived from subsets of the MM elements. These metrics permit extraction of signatures that provide direct indicators of hidden optical properties of complex systems, while featuring an intriguing asymmetry about what information can or cannot be inferred via these metrics. We harness such characteristics to reveal the spin-Hall effect of light, infer microscopic structure within laser-written photonic waveguides, and conduct rapid pathological diagnosis through analysis of healthy and cancerous tissue. This provides new insight for the broader usage of such asymmetric inferred vectorial information. △ Less

Submitted 21 July, 2021; v1 submitted 20 July, 2021; originally announced July 2021.

Focus the electromagnetic field to $10^{-6} λらむだ$ for ultra-high enhancement of field-matter interaction

Authors: Xiang-Dong Chen, En-Hui Wang, Long-Kun Shan, Ce Feng, Yu Zheng, Yang Dong, Guang-Can Guo, Fang-Wen Sun

Abstract: Focusing electromagnetic field to enhance the interaction with matter has been promoting researches and applications of nano electronics and photonics. Usually, the evanescent-wave coupling is adopted in various nano structures and materials to confine the electromagnetic field into a subwavelength space. Here, based on the direct coupling with confined electron oscillations in a nanowire, we demo… ▽ More Focusing electromagnetic field to enhance the interaction with matter has been promoting researches and applications of nano electronics and photonics. Usually, the evanescent-wave coupling is adopted in various nano structures and materials to confine the electromagnetic field into a subwavelength space. Here, based on the direct coupling with confined electron oscillations in a nanowire, we demonstrate an extreme localization of microwave field down to 10$^{-6}λらむだ$. A hybrid nanowire-bowtie antenna is further designed to focus the free-space microwave to this deep-subwavelength space. Detected by the nitrogen vacancy center in diamond, the field intensity and microwave-spin interaction strength are enhanced by 2.0$\times$10$^{8}$ and 1.4$\times$10$^{4}$ times, respectively. Such an extreme concentration of microwave field will further promote integrated quantum information processing, sensing and microwave photonics in a nanoscale system. △ Less

Submitted 12 May, 2021; originally announced May 2021.

Comments: 16 pages, 10 figures

Science as a Public Good: Public Use and Funding of Science

Authors: Yian Yin, Yuxiao Dong, Kuansan Wang, Dashun Wang, Benjamin F. Jones

Abstract: Knowledge of how science is consumed in public domains is essential for a deeper understanding of the role of science in human society. While science is heavily supported by public funding, common depictions suggest that scientific research remains an isolated or 'ivory tower' activity, with weak connectivity to public use, little relationship between the quality of research and its public use, an… ▽ More Knowledge of how science is consumed in public domains is essential for a deeper understanding of the role of science in human society. While science is heavily supported by public funding, common depictions suggest that scientific research remains an isolated or 'ivory tower' activity, with weak connectivity to public use, little relationship between the quality of research and its public use, and little correspondence between the funding of science and its public use. This paper introduces a measurement framework to examine public good features of science, allowing us to study public uses of science, the public funding of science, and how use and funding relate. Specifically, we integrate five large-scale datasets that link scientific publications from all scientific fields to their upstream funding support and downstream public uses across three public domains - government documents, the news media, and marketplace invention. We find that the public uses of science are extremely diverse, with different public domains drawing distinctively across scientific fields. Yet amidst these differences, we find key forms of alignment in the interface between science and society. First, despite concerns that the public does not engage high-quality science, we find universal alignment, in each scientific field and public domain, between what the public consumes and what is highly impactful within science. Second, despite myriad factors underpinning the public funding of science, the resulting allocation across fields presents a striking alignment with the field's collective public use. Overall, public uses of science present a rich landscape of specialized consumption, yet collectively science and society interface with remarkable, quantifiable alignment between scientific use, public use, and funding. △ Less

Submitted 30 April, 2021; originally announced May 2021.

A high-sensitivity fiber-coupled diamond magnetometer with surface coating

Authors: Shao-Chun Zhang, Hao-Bin Lin, Yang Dong, Bo Du, Xue-Dong Gao, Cui Yu, Zhi-Hong Feng, Xiang-Dong Chen, Guang-Can Guo, Fang-Wen Sun

Abstract: Nitrogen-vacancy quantum defects in diamond offer a promising platform for magnetometry because of their remarkable optical and spin properties. In this Letter, we present a high-sensitivity and wide-bandwidth fiber-based quantum magnetometer for practical applications. By coating the diamond surface with silver reflective film, both the fluorescence collection and excitation efficiency are enhanc… ▽ More Nitrogen-vacancy quantum defects in diamond offer a promising platform for magnetometry because of their remarkable optical and spin properties. In this Letter, we present a high-sensitivity and wide-bandwidth fiber-based quantum magnetometer for practical applications. By coating the diamond surface with silver reflective film, both the fluorescence collection and excitation efficiency are enhanced. Additionally, tracking pulsed optically detected magnetic resonance spectrum allowed a magnetic field sensitivity of $35$ pT$/\sqrt{\rm{Hz}}$ and a bandwidth of $4.1$ KHz. Finally, this magnetometer was successfully applied to map the magnetic field induced by the current-carrying copper-wire mesh. Such a stable and compact magnetometry can provide a powerful tool in many areas of physical, chemical, and biological researches. △ Less

Submitted 24 February, 2021; originally announced February 2021.

Comments: 5 pages, 5 figures

Deep Convolutional Neural Networks to Predict Mutual Coupling Effects in Metasurfaces

Authors: Sensong An, Bowen Zheng, Mikhail Y. Shalaginov, Hong Tang, Hang Li, Li Zhou, Yunxi Dong, Mohammad Haerinia, Anuradha Murthy Agarwal, Clara Rivero-Baleine, Myungkoo Kang, Kathleen A. Richardson, Tian Gu, Juejun Hu, Clayton Fowler, Hualiang Zhang

Abstract: Metasurfaces have provided a novel and promising platform for the realization of compact and large-scale optical devices. The conventional metasurface design approach assumes periodic boundary conditions for each element, which is inaccurate in most cases since the near-field coupling effects between elements will change when surrounded by non-identical structures. In this paper, we propose a deep… ▽ More Metasurfaces have provided a novel and promising platform for the realization of compact and large-scale optical devices. The conventional metasurface design approach assumes periodic boundary conditions for each element, which is inaccurate in most cases since the near-field coupling effects between elements will change when surrounded by non-identical structures. In this paper, we propose a deep learning approach to predict the actual electromagnetic (EM) responses of each target meta-atom placed in a large array with near-field coupling effects taken into account. The predicting neural network takes the physical specifications of the target meta-atom and its neighbors as input, and calculates its phase and amplitude in milliseconds. This approach can be applied to explain metasurfaces' performance deterioration caused by mutual coupling and further used to optimize their efficiencies once combined with optimization algorithms. To demonstrate the efficacy of this methodology, we obtain large improvements in efficiency for a beam deflector and a metalens over the conventional design approach. Moreover, we show the correlations between a metasurface's performance and its design errors caused by mutual coupling are not bound to certain specifications (materials, shapes, etc.). As such, we envision that this approach can be readily applied to explore the mutual coupling effects and improve the performance of various metasurface designs. △ Less

Submitted 2 February, 2021; originally announced February 2021.

Comments: 16 pages, 10 figures

Controllable Optical Resonances and Unidirectional Scattering by Core-shell Nanoparticles

Authors: Yiwei Dong, Yuanqing Yang

Abstract: Nanoparticles supporting a distinct series of Mie resonances have enabled a new class of nanoantennas and provide efficient ways to manipulate light at the nanoscale. The ability to flexibly tune the optical resonances and scattering directionality are particularly essential for various applications ranging from biosensing to nanolasers. In this paper, we investigate the core-shell nanoparticles t… ▽ More Nanoparticles supporting a distinct series of Mie resonances have enabled a new class of nanoantennas and provide efficient ways to manipulate light at the nanoscale. The ability to flexibly tune the optical resonances and scattering directionality are particularly essential for various applications ranging from biosensing to nanolasers. In this paper, we investigate the core-shell nanoparticles that support both electric and magnetic Mie resonances and for the first time systematically reveal the mode evolution from a pure high-index dielectric nanosphere to a pure plasmonic one, where it has a sudden transition when core-shell ratio increases from 0.4 to 0.5. Furthermore, by engineering the electric and magnetic resonances, we demonstrate the unidirectional forward and backward scattering in such a system and reveal its tunability via geometric tuning. △ Less

Submitted 2 January, 2021; v1 submitted 14 December, 2020; originally announced December 2020.

Effect of the charge distribution of virus coat proteins on the length of packaged RNAs

Authors: Yinan Dong, Siyu Li, Roya Zandi

Abstract: Single-stranded RNA viruses efficiently encapsulate their genome into a protein shell called the capsid. Electrostatic interactions between the positive charges in the capsid protein's N-terminal tail and the negatively charged genome have been postulated as the main driving force for virus assembly. Recent experimental results indicate that the N-terminal tail with the same number of charges and… ▽ More Single-stranded RNA viruses efficiently encapsulate their genome into a protein shell called the capsid. Electrostatic interactions between the positive charges in the capsid protein's N-terminal tail and the negatively charged genome have been postulated as the main driving force for virus assembly. Recent experimental results indicate that the N-terminal tail with the same number of charges and same lengths package different amounts of RNA, which reveals that electrostatics alone cannot explain all the observed outcomes of the RNA self-assembly experiments. Using a mean-field theory, we show that the combined effect of genome configurational entropy and electrostatics can explain to some extent the amount of packaged RNA with mutant proteins where the location and number of charges on the tails are altered. Understanding the factors contributing to the virus assembly could promote the attempt to block viral infections or to build capsids for gene therapy applications. △ Less

Submitted 4 December, 2020; originally announced December 2020.

Comments: 9 pages, 11 figures

The FragmentatiOn Of Target Experiment (FOOT) and its DAQ system

Authors: Silvia Biondi, Andrey Alexandrov, Behcet Alpat, Giovanni Ambrosi, Stefano Argirò, Rau Arteche Diaz, Nazarm Bartosik, Giuseppe Battistoni, Nicola Belcari, Elettra Bellinzona, Maria Giuseppina Bisogni, Graziano Bruni, Pietro Carra, Piergiorgio Cerello, Esther Ciarrocchi, Alberto Clozza, Sofia Colombi, Giovanni De Lellis, Alberto Del Guerra, Micol De Simoni, Antonia Di Crescenzo, Benedetto Di Ruzza, Marco Donetti, Yunsheng Dong, Marco Durante , et al. (70 additional authors not shown)

Abstract: The FragmentatiOn Of Target (FOOT) experiment aims to provide precise nuclear cross-section measurements for two different fields: hadrontherapy and radio-protection in space. The main reason is the important role the nuclear fragmentation process plays in both fields, where the health risks caused by radiation are very similar and mainly attributable to the fragmentation process. The FOOT experim… ▽ More The FragmentatiOn Of Target (FOOT) experiment aims to provide precise nuclear cross-section measurements for two different fields: hadrontherapy and radio-protection in space. The main reason is the important role the nuclear fragmentation process plays in both fields, where the health risks caused by radiation are very similar and mainly attributable to the fragmentation process. The FOOT experiment has been developed in such a way that the experimental setup is easily movable and fits the space limitations of the experimental and treatment rooms available in hadrontherapy treatment centers, where most of the data takings are carried out. The Trigger and Data Acquisition system needs to follow the same criteria and it should work in different laboratories and in different conditions. It has been designed to acquire the largest sample size with high accuracy in a controlled and online-monitored environment. The data collected are processed in real-time for quality assessment and are available to the DAQ crew and detector experts during data taking. △ Less

Submitted 29 October, 2020; originally announced October 2020.

FISTA-Net: Learning A Fast Iterative Shrinkage Thresholding Network for Inverse Problems in Imaging

Authors: Jinxi Xiang, Yonggui Dong, Yunjie Yang

Abstract: Inverse problems are essential to imaging applications. In this paper, we propose a model-based deep learning network, named FISTA-Net, by combining the merits of interpretability and generality of the model-based Fast Iterative Shrinkage/Thresholding Algorithm (FISTA) and strong regularization and tuning-free advantages of the data-driven neural network. By unfolding the FISTA into a deep network… ▽ More Inverse problems are essential to imaging applications. In this paper, we propose a model-based deep learning network, named FISTA-Net, by combining the merits of interpretability and generality of the model-based Fast Iterative Shrinkage/Thresholding Algorithm (FISTA) and strong regularization and tuning-free advantages of the data-driven neural network. By unfolding the FISTA into a deep network, the architecture of FISTA-Net consists of multiple gradient descent, proximal mapping, and momentum modules in cascade. Different from FISTA, the gradient matrix in FISTA-Net can be updated during iteration and a proximal operator network is developed for nonlinear thresholding which can be learned through end-to-end training. Key parameters of FISTA-Net including the gradient step size, thresholding value and momentum scalar are tuning-free and learned from training data rather than hand-crafted. We further impose positive and monotonous constraints on these parameters to ensure they converge properly. The experimental results, evaluated both visually and quantitatively, show that the FISTA-Net can optimize parameters for different imaging tasks, i.e. Electromagnetic Tomography (EMT) and X-ray Computational Tomography (X-ray CT). It outperforms the state-of-the-art model-based and deep learning methods and exhibits good generalization ability over other competitive learning-based approaches under different noise levels. △ Less

Submitted 25 January, 2021; v1 submitted 6 August, 2020; originally announced August 2020.

Comments: 11 pages;

A robust fiber-based quantum thermometer coupled with nitrogen-vacancy centers

Authors: Shao-Chun Zhang, Yang Dong, Bo Du, Hao-Bin Lin, Shen Li, Wei Zhu, Guan-Zhong Wang, Xiang-Dong Chen, Guang-Can Guo, Fang-Wen Sun

Abstract: The nitrogen-vacancy center in diamond has been broadly applied in quantum sensing since it is sensitive to different physical quantities. Meanwhile, it is difficult to isolate disturbances from unwanted physical quantities in practical applications. Here, we present a robust fiber-based quantum thermometer which can significantly isolate the magnetic field noise and microwave power shift. With a… ▽ More The nitrogen-vacancy center in diamond has been broadly applied in quantum sensing since it is sensitive to different physical quantities. Meanwhile, it is difficult to isolate disturbances from unwanted physical quantities in practical applications. Here, we present a robust fiber-based quantum thermometer which can significantly isolate the magnetic field noise and microwave power shift. With a frequency modulation scheme, we realize the temperature measurement by detecting the variation of the sharp-dip in the zero-field optically detected magnetic resonance spectrum in a high-density nitrogen-vacancy ensemble. Thanks to its simplicity and compatibility in implementation and robustness in the isolation of magnetic and microwave noise, this quantum thermometer is then applied to the surface temperature imaging of an electronic chip with a sensitivity of $18$ $\rm{mK}/\sqrt{\rm{Hz}}$. It paves the way to high sensitive temperature measurement in ambiguous environments. △ Less

Submitted 8 April, 2020; originally announced April 2020.

Comments: 10 pages, 6 figures

Side-On transition radiation detector: a detector prototype for TeV energy scale calibration of calorimeters in space

Authors: Bo Huang, Hongbang Liu, Xuefeng Huang, Ming Xu, Yongwei Dong, Xiaotong Wei, Xiwen Liu, Huanbo Feng, Qinhe Yang, Jianyu Gu, Shuai Chen, Xiaochuan Xie, Jin Zhang, Yongbo Huang, Enwei Liang

Abstract: Transition Radiation (TR) plays an important role in particle identification in high-energy physics and its characteristics provide a feasible method of energy calibration in the energy range up to 10 TeV, which is of interest for dark matter searches in cosmic rays. In a Transition Radiation Detector (TRD), the TR signal is superimposed onto the ionization energy loss signal induced by incident c… ▽ More Transition Radiation (TR) plays an important role in particle identification in high-energy physics and its characteristics provide a feasible method of energy calibration in the energy range up to 10 TeV, which is of interest for dark matter searches in cosmic rays. In a Transition Radiation Detector (TRD), the TR signal is superimposed onto the ionization energy loss signal induced by incident charged particles. In order to make the TR signal stand out from the background of ionization energy loss in a significant way, we optimized both the radiators and the detector. We have designed a new prototype of regular radiator optimized for a maximal TR photon yield, combined with the Side-On TRD which is supposed to improve the detection efficiency of TR. We started a test beam experiment with the Side-On TRD at Conseil Européen pour la Recherche Nucléaire (CERN), and found that the experimental data is consistent with the simulation results. △ Less

Submitted 2 April, 2020; v1 submitted 26 March, 2020; originally announced March 2020.

Comments: 13 pages, 10 figures, 2 tables

Journal ref: Nuclear Inst. and Methods in Physics Research, A 962 (2020) 163723

Multi-frequency Electromagnetic Tomography for Acute Stroke Detection Using Frequency Constrained Sparse Bayesian Learning

Authors: Jinxi Xiang, Yonggui Dong, Yunjie Yang

Abstract: Imaging the bio-impedance distribution of the brain can provide initial diagnosis of acute stroke. This paper presents a compact and non-radiative tomographic modality, i.e. multi-frequency Electromagnetic Tomography (mfEMT), for the initial diagnosis of acute stroke. The mfEMT system consists of 12 channels of gradiometer coils with adjustable sensitivity and excitation frequency. To solve the im… ▽ More Imaging the bio-impedance distribution of the brain can provide initial diagnosis of acute stroke. This paper presents a compact and non-radiative tomographic modality, i.e. multi-frequency Electromagnetic Tomography (mfEMT), for the initial diagnosis of acute stroke. The mfEMT system consists of 12 channels of gradiometer coils with adjustable sensitivity and excitation frequency. To solve the image reconstruction problem of mfEMT, we propose an enhanced Frequency-Constrained Sparse Bayesian Learning (FC-SBL) to simultaneously reconstruct the conductivity distribution at all frequencies. Based on the Multiple Measurement Vector (MMV) model in the Sparse Bayesian Learning (SBL) framework, FC-SBL can recover the underlying distribution pattern of conductivity among multiple images by exploiting the frequency constraint information. A realistic 3D head model was established to simulate stroke detection scenarios, showing the capability of mfEMT to penetrate the highly resistive skull and improved image quality with FC-SBL. Both simulations and experiments showed that the proposed FC-SBL method is robust to noisy data for image reconstruction problems of mfEMT compared to the single measurement vector model, which is promising to detect acute strokes in the brain region with enhanced spatial resolution and in a baseline-free manner. △ Less

Submitted 28 July, 2020; v1 submitted 2 March, 2020; originally announced March 2020.

Comments: 11 pages;IEEE TMI 2020 in press